| Source: e2fsprogs |
| Section: admin |
| Priority: required |
| Maintainer: Theodore Y. Ts'o <tytso@mit.edu> |
| Build-Depends: texi2html (>= 1.76), gettext, texinfo, dc, pkg-config, dietlibc-dev [alpha amd64 arm hppa i386 ia64 mips mipsel powerpc ppc64 s390 sparc], libsepol1-dev [!hurd-i386 !kfreebsd-i386 !kfreebsd-amd64], libdevmapper-dev [!hurd-i386 !kfreebsd-i386 !kfreebsd-amd64], libselinux1-dev [!hurd-i386 !kfreebsd-i386 !kfreebsd-amd64], debhelper (>= 4) |
| Standards-Version: 3.7.3.0 |
| |
| Package: e2fsck-static |
| Section: admin |
| Priority: optional |
| Depends: |
| Recommends: sash | zsh-static | busybox-static | zsh30-static |
| Architecture: any |
| Description: statically-linked version of the ext2 filesystem checker |
| This may be of some help to you if your filesystem gets corrupted enough |
| to break the shared libraries used by the dynamically linked checker. |
| . |
| This binary takes much more space than its dynamic counterpart located |
| in e2fsprogs, though. |
| . |
| You may want to install a statically-linked shell as well, to be able |
| to run this program if something like your C library gets corrupted. |
| |
| Package: libcomerr2 |
| Section: libs |
| Priority: required |
| Provides: libcomerr-kth-compat |
| Depends: ${shlibs:Depends} |
| Replaces: e2fsprogs (<< 1.34-1) |
| Architecture: any |
| Description: common error description library |
| libcomerr is an attempt to present a common error-handling mechanism to |
| manipulate the most common form of error code in a fashion that does not |
| have the problems identified with mechanisms commonly in use. |
| |
| Package: comerr-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libcomerr2 (= ${mainBinary}) |
| Suggests: doc-base |
| Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3) |
| Architecture: any |
| Description: common error description library - headers and static libraries |
| libcom_err is an attempt to present a common error-handling mechanism to |
| manipulate the most common form of error code in a fashion that does not |
| have the problems identified with mechanisms commonly in use. |
| . |
| This package contains the development environment for the com_err library. |
| |
| Package: libss2 |
| Section: libs |
| Priority: required |
| Depends: libcomerr2, ${shlibs:Depends} |
| Replaces: e2fsprogs (<< 1.34-1) |
| Architecture: any |
| Description: command-line interface parsing library |
| This package includes a tool that parses a command table to generate |
| a simple command-line interface parser, the include files needed to |
| compile and use it, and the static libs. |
| . |
| It was originally inspired by the Multics SubSystem library. |
| |
| Package: ss-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libss2 (= ${mainBinary}), comerr-dev |
| Architecture: any |
| Description: command-line interface parsing library - headers and static libraries |
| This package includes a tool that parses a command table to generate |
| a simple command-line interface parser, the include files needed to |
| compile and use it, and the static libs. |
| . |
| It was originally inspired by the Multics SubSystem library. |
| . |
| This package contains the development environment for the ss library. |
| |
| Package: libuuid1 |
| Section: libs |
| Priority: required |
| Depends: passwd, ${shlibs:Depends} |
| Recommends: uuid-runtime |
| Replaces: e2fsprogs (<< 1.34-1) |
| Architecture: any |
| Description: universally unique id library |
| libuuid generates and parses 128-bit universally unique id's (UUID's). |
| See RFC 4122 for more information. |
| |
| Package: uuid-runtime |
| Section: libs |
| Priority: optional |
| Depends: passwd, libuuid1 (>> 1.40.3-1), ${shlibs:Depends} |
| Replaces: e2fsprogs (<= 1.40.3-1ubuntu1) |
| Architecture: any |
| Description: universally unique id library |
| libuuid generates and parses 128-bit universally unique id's (UUID's). |
| See RFC 4122 for more information. |
| . |
| This package contains the uuidd daemon which is used by libuuid as well as |
| the uuidgen program. |
| |
| Package: libuuid1-udeb |
| Section: debian-installer |
| Priority: optional |
| Depends: ${shlibs:Depends} |
| Architecture: any |
| Description: universally unique id library |
| libuuid generates and parses 128-bit universally unique id's (UUID's). |
| See RFC 4122 for more information. |
| . |
| This is a minimal package for debian-installer. |
| |
| Package: uuid-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libuuid1 (= ${mainBinary}) |
| Replaces: e2fslibs-dev (<< 1.15) |
| Architecture: any |
| Description: universally unique id library - headers and static libraries |
| libuuid generates and parses 128-bit universally unique id's (UUID's). |
| See RFC 4122 for more information. |
| . |
| This package contains the development environment for the uuid library. |
| |
| Package: libblkid1 |
| Section: libs |
| Priority: required |
| Depends: ${shlibs:Depends} |
| Architecture: any |
| Description: block device id library |
| The blkid library which allows system programs like fsck and |
| mount to quickly and easily find block devices by filesystem UUID and |
| LABEL. This allows system administrators to avoid specifying |
| filesystems by hard-coded device names, but via a logical naming |
| system instead. |
| |
| Package: libblkid1-udeb |
| Section: debian-installer |
| Priority: optional |
| Depends: ${shlibs:Depends} |
| Architecture: any |
| Description: block device id library |
| The blkid library which allows system programs like fsck and |
| mount to quickly and easily find block devices by filesystem UUID and |
| LABEL. This allows system administrators to avoid specifiying |
| filesystems by hard-coded device names, but via a logical naming |
| system instead. |
| . |
| This is a minimal package for debian-installer. |
| |
| Package: libblkid-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libblkid1 (= ${binary:Version}) |
| Architecture: any |
| Description: block device id library - headers and static libraries |
| The blkid library which allows system programs like fsck and |
| mount to quickly and easily find block devices by filesystem UUID and |
| LABEL. This allows system administrators to avoid specifiying |
| filesystems by hard-coded device names, but via a logical naming |
| system instead. |
| . |
| This package contains the development environment for the blkid library. |
| |
| Package: e2fsprogs-udeb |
| Section: debian-installer |
| Priority: optional |
| Depends: ${shlibs:Depends} |
| Architecture: any |
| Description: stripped-down versions of e2fsprogs, for debian-installer |
| This package is an e2fsprogs package built for a reduced size, so that |
| it can help to save space in debian-installer. |
| . |
| Don't attempt to install this package, it has no support for a couple of |
| features you surely want. Anyway it should refuse to install. |
| |
| Package: e2fslibs |
| Section: libs |
| Priority: required |
| Depends: ${shlibs:Depends} |
| Replaces: e2fsprogs (<< 1.34-1) |
| Provides: libext2fs2, libe2p2 |
| Architecture: any |
| Description: ext2 filesystem libraries |
| The ext2fs and e2p libraries are used by programs that directly access |
| EXT2 filesystems from usermode programs. The EXT2 filesystem is very often |
| used as the default filesystem on Linux systems. Various system programs |
| that use libext2fs include e2fsck, mke2fs, tune2fs, etc. Programs that use |
| libe2p include dumpe2fs, chattr, and lsattr. |
| |
| Package: e2fslibs-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${binary:Version}) |
| Suggests: doc-base |
| Provides: ext2fs-dev, e2p-dev |
| Replaces: libkrb5-dev (<< 1.3) |
| Architecture: any |
| Description: ext2 filesystem libraries - headers and static libraries |
| The ext2fs and e2p libraries are used by programs that directly access |
| EXT2 filesystems from usermode programs. The EXT2 filesystem is very often |
| used as the default filesystem on Linux systems. Various system programs |
| that use libext2fs include e2fsck, mke2fs, tune2fs, etc. Programs that use |
| libe2p include dumpe2fs, chattr, and lsattr. |
| . |
| This package contains the development environment for the ext2fs and e2p |
| libraries. |
| |
| Package: e2fsprogs |
| Essential: yes |
| Pre-Depends: ${shlibs:Depends} |
| Depends: |
| Suggests: gpart, parted, e2fsck-static |
| Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4) |
| Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2) |
| Architecture: any |
| Description: ext2 file system utilities and libraries |
| EXT2 stands for "Extended Filesystem", version 2. It's the main |
| filesystem type used for hard disks on Debian and other Linux systems. |
| . |
| This package contains programs for creating, checking, and maintaining EXT2 |
| filesystems, and the generic `fsck' wrapper. |
