| Source: e2fsprogs |
| Section: admin |
| Priority: required |
| Maintainer: Theodore Y. Ts'o <tytso@mit.edu> |
| ifdef(`UTIL_LINUX_NG', |
| ``Build-Depends: texi2html (>= 1.76), gettext, texinfo, dc, pkg-config, dietlibc-dev (>> 0.30) [alpha amd64 arm hppa i386 ia64 powerpc ppc64 s390 sparc], debhelper (>= 7.0), m4, libblkid-dev (>= 2.16), uuid-dev (>= 2.16) |
| '', |
| ``Build-Depends: texi2html (>= 1.76), gettext, texinfo, dc, pkg-config, dietlibc-dev (>> 0.30) [alpha amd64 arm hppa i386 ia64 powerpc ppc64 s390 sparc], debhelper (>= 7.0), m4 |
| '')dnl |
| Standards-Version: 3.8.4 |
| Homepage: http://e2fsprogs.sourceforge.net |
| |
| Package: e2fsck-static |
| Priority: optional |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Recommends: sash | bash-static | zsh-static | busybox-static | zsh30-static |
| Architecture: any |
| Description: statically-linked version of the ext2/ext3/ext4 filesystem checker |
| This may be of some help to you if your filesystem gets corrupted enough |
| to break the shared libraries used by the dynamically linked checker. |
| . |
| This binary takes much more space than its dynamic counterpart located |
| in e2fsprogs, though. |
| . |
| You may want to install a statically-linked shell as well, to be able |
| to run this program if something like your C library gets corrupted. |
| |
| Package: libcomerr2 |
| Section: libs |
| Provides: libcomerr-kth-compat |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Replaces: e2fsprogs (<< 1.34-1) |
| Architecture: any |
| Description: common error description library |
| libcomerr is an attempt to present a common error-handling mechanism to |
| manipulate the most common form of error code in a fashion that does not |
| have the problems identified with mechanisms commonly in use. |
| |
| Package: comerr-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libcomerr2 (= ${mainBinary}), ${misc:Depends} |
| Suggests: doc-base |
| Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3) |
| Architecture: any |
| Description: common error description library - headers and static libraries |
| libcom_err is an attempt to present a common error-handling mechanism to |
| manipulate the most common form of error code in a fashion that does not |
| have the problems identified with mechanisms commonly in use. |
| . |
| This package contains the development environment for the com_err library. |
| |
| Package: libss2 |
| Section: libs |
| Depends: libcomerr2, ${shlibs:Depends}, ${misc:Depends} |
| Replaces: e2fsprogs (<< 1.34-1) |
| Architecture: any |
| Description: command-line interface parsing library |
| This package includes a tool that parses a command table to generate |
| a simple command-line interface parser, the include files needed to |
| compile and use it, and the static libs. |
| . |
| It was originally inspired by the Multics SubSystem library. |
| |
| Package: ss-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libss2 (= ${mainBinary}), comerr-dev, ${misc:Depends} |
| Architecture: any |
| Description: command-line interface parsing library - headers and static libraries |
| This package includes a tool that parses a command table to generate |
| a simple command-line interface parser, the include files needed to |
| compile and use it, and the static libs. |
| . |
| It was originally inspired by the Multics SubSystem library. |
| . |
| This package contains the development environment for the ss library. |
| ifdef(`UTIL_LINUX_NG',,`` |
| Package: libuuid1 |
| Section: libs |
| Depends: passwd, ${shlibs:Depends}, ${misc:Depends} |
| Recommends: uuid-runtime |
| Replaces: e2fsprogs (<< 1.34-1) |
| Architecture: any |
| Description: Universally Unique ID library |
| The libuuid library generates and parses 128-bit universally unique |
| ids (UUIDs). A UUID is an identifier that is unique across both |
| space and time, with respect to the space of all UUIDs. A UUID can |
| be used for multiple purposes, from tagging objects with an extremely |
| short lifetime, to reliably identifying very persistent objects |
| across a network. |
| . |
| See RFC 4122 for more information. |
| |
| Package: uuid-runtime |
| Section: libs |
| Priority: optional |
| Depends: passwd, libuuid1 (>> 1.40.3-1), ${shlibs:Depends}, ${misc:Depends} |
| Replaces: e2fsprogs (<= 1.40.3-1ubuntu1) |
| Architecture: any |
| Description: runtime components for the Universally Unique ID library |
| The libuuid library generates and parses 128-bit universally unique |
| ids (UUIDs). A UUID is an identifier that is unique across both |
| space and time, with respect to the space of all UUIDs. A UUID can |
| be used for multiple purposes, from tagging objects with an extremely |
| short lifetime, to reliably identifying very persistent objects |
| across a network. |
| . |
| See RFC 4122 for more information. |
| . |
| This package contains the uuidgen program and the uuidd daemon. |
| . |
| The uuidd daemon is used to generate UUIDs, especially time-based |
| UUID’s, in a secure and guaranteed-unique fashion, even in the face |
| of large numbers of threads trying to grab UUID’s running on |
| different CPU’s. It is used by libuuid as well as the uuidgen |
| program. |
| |
| Package: libuuid1-udeb |
| XC-Package-Type: udeb |
| Section: debian-installer |
| Priority: optional |
| Depends: ${shlibs:Depends} |
| Architecture: any |
| Description: stripped down universally unique id library, for debian-installer |
| libuuid generates and parses 128-bit universally unique ids (UUIDs). |
| See RFC 4122 for more information. |
| . |
| This is a minimal package for debian-installer. |
| |
| Package: uuid-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libuuid1 (= ${mainBinary}), ${misc:Depends} |
| Replaces: e2fslibs-dev (<< 1.15) |
| Architecture: any |
| Description: universally unique id library - headers and static libraries |
| libuuid generates and parses 128-bit universally unique ids (UUIDs). |
| See RFC 4122 for more information. |
| . |
| This package contains the development environment for the uuid library. |
| |
| Package: libblkid1 |
| Section: libs |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Architecture: any |
| Description: block device id library |
| The blkid library which allows system programs like fsck and |
| mount to quickly and easily find block devices by filesystem UUID and |
| LABEL. This allows system administrators to avoid specifying |
| filesystems by hard-coded device names, but via a logical naming |
| system instead. |
| |
| Package: libblkid1-udeb |
| XC-Package-Type: udeb |
| Section: debian-installer |
| Priority: optional |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Architecture: any |
| Description: stripped down block device id library, for debian-installer |
| The blkid library which allows system programs like fsck and |
| mount to quickly and easily find block devices by filesystem UUID and |
| LABEL. This allows system administrators to avoid specifiying |
| filesystems by hard-coded device names, but via a logical naming |
| system instead. |
| . |
| This is a minimal package for debian-installer. |
| |
| Package: libblkid-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, libblkid1 (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: block device id library - headers and static libraries |
| The blkid library which allows system programs like fsck and |
| mount to quickly and easily find block devices by filesystem UUID and |
| LABEL. This allows system administrators to avoid specifiying |
| filesystems by hard-coded device names, but via a logical naming |
| system instead. |
| . |
| This package contains the development environment for the blkid library. |
| '')dnl |
| |
| Package: e2fsprogs-udeb |
| XC-Package-Type: udeb |
| Section: debian-installer |
| Priority: optional |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Architecture: any |
| Description: stripped-down versions of e2fsprogs, for debian-installer |
| This package is an e2fsprogs package built for a reduced size, so that |
| it can help to save space in debian-installer. |
| . |
| Don't attempt to install this package, it has no support for a couple of |
| features you surely want. Anyway it should refuse to install. |
| |
| Package: e2fslibs |
| Section: libs |
| Depends: ${shlibs:Depends}, ${misc:Depends} |
| Replaces: e2fsprogs (<< 1.34-1) |
| Provides: libext2fs2, libe2p2 |
| Architecture: any |
| Description: ext2/ext3/ext4 file system libraries |
| The ext2, ext3 and ext4 file systems are successors of the original ext |
| ("extended") file system. They are the main file system types used for |
| hard disks on Debian and other Linux systems. |
| . |
| This package provides the ext2fs and e2p libraries, for userspace software |
| that directly accesses extended file systems. Programs that use libext2fs |
| include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include |
| dumpe2fs, chattr, and lsattr. |
| |
| Package: e2fslibs-dev |
| Section: libdevel |
| Priority: extra |
| Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${binary:Version}), ${misc:Depends} |
| Suggests: doc-base |
| Provides: ext2fs-dev, e2p-dev |
| Replaces: libkrb5-dev (<< 1.3) |
| Architecture: any |
| Description: ext2/ext3/ext4 file system libraries - headers and static libraries |
| The ext2, ext3 and ext4 file systems are successors of the original ext |
| ("extended") file system. They are the main file system types used for |
| hard disks on Debian and other Linux systems. |
| . |
| This package contains the development environment for the ext2fs and e2p |
| libraries. |
| |
| Package: e2fsprogs |
| Essential: yes |
| ifdef(`UTIL_LINUX_NG', |
| ``Pre-Depends: ${shlibs:Depends}, ${misc:Depends}, util-linux (>= 2.15~rc1-1) |
| '', |
| ``Pre-Depends: ${shlibs:Depends}, ${misc:Depends} |
| '')dnl |
| Suggests: gpart, parted, e2fsck-static |
| Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4) |
| Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2) |
| Architecture: any |
| Description: ext2/ext3/ext4 file system utilities |
| The ext2, ext3 and ext4 file systems are successors of the original ext |
| ("extended") file system. They are the main file system types used for |
| hard disks on Debian and other Linux systems. |
| . |
| This package contains programs for creating, checking, and maintaining |
| ext-based file systems, and the generic fsck wrapper. |
| |
| Package: e2fsprogs-dbg |
| Section: debug |
| Priority: extra |
| Depends: e2fsprogs (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for e2fsprogs |
| This package includes the debug information useful for debugging e2fsprogs |
| and its libraries, contained in the e2fsprogs and e2fsck-static packages. |
| The debug information is used for execution tracing and core |
| dump analysis. |
| ifdef(`UTIL_LINUX_NG',,`` |
| Package: uuid-runtime-dbg |
| Section: debug |
| Priority: extra |
| Depends: uuid-runtime (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for uuid-runtime |
| This package includes the debug information useful for debugging the |
| uuid runtime programs, contained in the uuid-runtime package. |
| The debugging information is used for execution tracing and core |
| dump analysis. |
| '')dnl |
| |
| Package: e2fslibs-dbg |
| Section: debug |
| Priority: extra |
| Depends: e2fslibs (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for e2fslibs |
| This package includes the debug information useful for debugging the |
| ext2fs and e2p libraries, contained in the e2fslibs package. The debug |
| information is used for execution tracing and core dump analysis. |
| |
| Package: libcomerr2-dbg |
| Section: debug |
| Priority: extra |
| Depends: libcomerr2 (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for libcomerr2 |
| This package includes the debug information useful for debugging the |
| com_err library, contained in the libcomerr2 package. The debugging |
| information is used for execution tracing and core dump analysis. |
| |
| Package: libss2-dbg |
| Section: debug |
| Priority: extra |
| Depends: libss2 (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for libss2 |
| This package includes the debug information useful for debugging the |
| ss library, contained in the libss2 package. The debug information |
| is used for execution tracing and core dump analysis. |
| ifdef(`UTIL_LINUX_NG',,`` |
| Package: libblkid1-dbg |
| Section: debug |
| Priority: extra |
| Depends: libblkid1 (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for libblkid1 |
| This package includes the debug information useful for debugging the |
| blkid library, contained in the libblkid1 package. The debug |
| information is used for execution tracing and core dump analysis. |
| |
| Package: libuuid1-dbg |
| Section: debug |
| Priority: extra |
| Depends: libuuid1 (= ${binary:Version}), ${misc:Depends} |
| Architecture: any |
| Description: debugging information for libuuid1 |
| This package includes the debug information useful for debugging the |
| UUID library, contained in the libuuid1 package. The debug |
| information is used for execution tracing and core dump analysis. |
| '')dnl |
