| /* |
| * icount.c --- an efficient inode count abstraction |
| * |
| * Copyright (C) 1997 Theodore Ts'o. |
| * |
| * %Begin-Header% |
| * This file may be redistributed under the terms of the GNU Public |
| * License. |
| * %End-Header% |
| */ |
| |
| #if HAVE_UNISTD_H |
| #include <unistd.h> |
| #endif |
| #include <string.h> |
| #include <stdio.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| #include <errno.h> |
| |
| #include "ext2_fs.h" |
| #include "ext2fs.h" |
| #include "tdb.h" |
| |
| /* |
| * The data storage strategy used by icount relies on the observation |
| * that most inode counts are either zero (for non-allocated inodes), |
| * one (for most files), and only a few that are two or more |
| * (directories and files that are linked to more than one directory). |
| * |
| * Also, e2fsck tends to load the icount data sequentially. |
| * |
| * So, we use an inode bitmap to indicate which inodes have a count of |
| * one, and then use a sorted list to store the counts for inodes |
| * which are greater than one. |
| * |
| * We also use an optional bitmap to indicate which inodes are already |
| * in the sorted list, to speed up the use of this abstraction by |
| * e2fsck's pass 2. Pass 2 increments inode counts as it finds them, |
| * so this extra bitmap avoids searching the sorted list to see if a |
| * particular inode is on the sorted list already. |
| */ |
| |
| struct ext2_icount_el { |
| ext2_ino_t ino; |
| __u32 count; |
| }; |
| |
| struct ext2_icount { |
| errcode_t magic; |
| ext2fs_inode_bitmap single; |
| ext2fs_inode_bitmap multiple; |
| ext2_ino_t count; |
| ext2_ino_t size; |
| ext2_ino_t num_inodes; |
| ext2_ino_t cursor; |
| struct ext2_icount_el *list; |
| struct ext2_icount_el *last_lookup; |
| char *tdb_fn; |
| TDB_CONTEXT *tdb; |
| }; |
| |
| /* |
| * We now use a 32-bit counter field because it doesn't cost us |
| * anything extra for the in-memory data structure, due to alignment |
| * padding. But there's no point changing the interface if most of |
| * the time we only care if the number is bigger than 65,000 or not. |
| * So use the following translation function to return a 16-bit count. |
| */ |
| #define icount_16_xlate(x) (((x) > 65500) ? 65500 : (x)) |
| |
| void ext2fs_free_icount(ext2_icount_t icount) |
| { |
| if (!icount) |
| return; |
| |
| icount->magic = 0; |
| if (icount->list) |
| ext2fs_free_mem(&icount->list); |
| if (icount->single) |
| ext2fs_free_inode_bitmap(icount->single); |
| if (icount->multiple) |
| ext2fs_free_inode_bitmap(icount->multiple); |
| if (icount->tdb) |
| tdb_close(icount->tdb); |
| if (icount->tdb_fn) { |
| unlink(icount->tdb_fn); |
| free(icount->tdb_fn); |
| } |
| |
| ext2fs_free_mem(&icount); |
| } |
| |
| static errcode_t alloc_icount(ext2_filsys fs, int flags, ext2_icount_t *ret) |
| { |
| ext2_icount_t icount; |
| errcode_t retval; |
| |
| *ret = 0; |
| |
| retval = ext2fs_get_mem(sizeof(struct ext2_icount), &icount); |
| if (retval) |
| return retval; |
| memset(icount, 0, sizeof(struct ext2_icount)); |
| |
| retval = ext2fs_allocate_inode_bitmap(fs, 0, &icount->single); |
| if (retval) |
| goto errout; |
| |
| if (flags & EXT2_ICOUNT_OPT_INCREMENT) { |
| retval = ext2fs_allocate_inode_bitmap(fs, 0, |
| &icount->multiple); |
| if (retval) |
| goto errout; |
| } else |
| icount->multiple = 0; |
| |
| icount->magic = EXT2_ET_MAGIC_ICOUNT; |
| icount->num_inodes = fs->super->s_inodes_count; |
| |
| *ret = icount; |
| return 0; |
| |
| errout: |
| ext2fs_free_icount(icount); |
| return(retval); |
| } |
| |
| struct uuid { |
| __u32 time_low; |
| __u16 time_mid; |
| __u16 time_hi_and_version; |
| __u16 clock_seq; |
| __u8 node[6]; |
| }; |
| |
| static void unpack_uuid(void *in, struct uuid *uu) |
| { |
| __u8 *ptr = in; |
| __u32 tmp; |
| |
| tmp = *ptr++; |
| tmp = (tmp << 8) | *ptr++; |
| tmp = (tmp << 8) | *ptr++; |
| tmp = (tmp << 8) | *ptr++; |
| uu->time_low = tmp; |
| |
| tmp = *ptr++; |
| tmp = (tmp << 8) | *ptr++; |
| uu->time_mid = tmp; |
| |
| tmp = *ptr++; |
| tmp = (tmp << 8) | *ptr++; |
| uu->time_hi_and_version = tmp; |
| |
| tmp = *ptr++; |
| tmp = (tmp << 8) | *ptr++; |
| uu->clock_seq = tmp; |
| |
| memcpy(uu->node, ptr, 6); |
| } |
| |
| static void uuid_unparse(void *uu, char *out) |
| { |
| struct uuid uuid; |
| |
| unpack_uuid(uu, &uuid); |
| sprintf(out, |
| "%08x-%04x-%04x-%02x%02x-%02x%02x%02x%02x%02x%02x", |
| uuid.time_low, uuid.time_mid, uuid.time_hi_and_version, |
| uuid.clock_seq >> 8, uuid.clock_seq & 0xFF, |
| uuid.node[0], uuid.node[1], uuid.node[2], |
| uuid.node[3], uuid.node[4], uuid.node[5]); |
| } |
| |
| errcode_t ext2fs_create_icount_tdb(ext2_filsys fs, char *tdb_dir, |
| int flags, ext2_icount_t *ret) |
| { |
| ext2_icount_t icount; |
| errcode_t retval; |
| char *fn, uuid[40]; |
| int fd; |
| |
| retval = alloc_icount(fs, flags, &icount); |
| if (retval) |
| return retval; |
| |
| retval = ext2fs_get_mem(strlen(tdb_dir) + 64, &fn); |
| if (retval) |
| goto errout; |
| uuid_unparse(fs->super->s_uuid, uuid); |
| sprintf(fn, "%s/%s-icount-XXXXXX", tdb_dir, uuid); |
| fd = mkstemp(fn); |
| |
| icount->tdb_fn = fn; |
| icount->tdb = tdb_open(fn, 0, TDB_CLEAR_IF_FIRST, |
| O_RDWR | O_CREAT | O_TRUNC, 0600); |
| if (icount->tdb) { |
| close(fd); |
| *ret = icount; |
| return 0; |
| } |
| |
| retval = errno; |
| close(fd); |
| |
| errout: |
| ext2fs_free_icount(icount); |
| return(retval); |
| } |
| |
| errcode_t ext2fs_create_icount2(ext2_filsys fs, int flags, unsigned int size, |
| ext2_icount_t hint, ext2_icount_t *ret) |
| { |
| ext2_icount_t icount; |
| errcode_t retval; |
| size_t bytes; |
| ext2_ino_t i; |
| |
| if (hint) { |
| EXT2_CHECK_MAGIC(hint, EXT2_ET_MAGIC_ICOUNT); |
| if (hint->size > size) |
| size = (size_t) hint->size; |
| } |
| |
| retval = alloc_icount(fs, flags, &icount); |
| if (retval) |
| return retval; |
| |
| if (size) { |
| icount->size = size; |
| } else { |
| /* |
| * Figure out how many special case inode counts we will |
| * have. We know we will need one for each directory; |
| * we also need to reserve some extra room for file links |
| */ |
| retval = ext2fs_get_num_dirs(fs, &icount->size); |
| if (retval) |
| goto errout; |
| icount->size += fs->super->s_inodes_count / 50; |
| } |
| |
| bytes = (size_t) (icount->size * sizeof(struct ext2_icount_el)); |
| #if 0 |
| printf("Icount allocated %u entries, %d bytes.\n", |
| icount->size, bytes); |
| #endif |
| retval = ext2fs_get_array(icount->size, sizeof(struct ext2_icount_el), |
| &icount->list); |
| if (retval) |
| goto errout; |
| memset(icount->list, 0, bytes); |
| |
| icount->count = 0; |
| icount->cursor = 0; |
| |
| /* |
| * Populate the sorted list with those entries which were |
| * found in the hint icount (since those are ones which will |
| * likely need to be in the sorted list this time around). |
| */ |
| if (hint) { |
| for (i=0; i < hint->count; i++) |
| icount->list[i].ino = hint->list[i].ino; |
| icount->count = hint->count; |
| } |
| |
| *ret = icount; |
| return 0; |
| |
| errout: |
| ext2fs_free_icount(icount); |
| return(retval); |
| } |
| |
| errcode_t ext2fs_create_icount(ext2_filsys fs, int flags, |
| unsigned int size, |
| ext2_icount_t *ret) |
| { |
| return ext2fs_create_icount2(fs, flags, size, 0, ret); |
| } |
| |
| /* |
| * insert_icount_el() --- Insert a new entry into the sorted list at a |
| * specified position. |
| */ |
| static struct ext2_icount_el *insert_icount_el(ext2_icount_t icount, |
| ext2_ino_t ino, int pos) |
| { |
| struct ext2_icount_el *el; |
| errcode_t retval; |
| ext2_ino_t new_size = 0; |
| int num; |
| |
| if (icount->last_lookup && icount->last_lookup->ino == ino) |
| return icount->last_lookup; |
| |
| if (icount->count >= icount->size) { |
| if (icount->count) { |
| new_size = icount->list[(unsigned)icount->count-1].ino; |
| new_size = (ext2_ino_t) (icount->count * |
| ((float) icount->num_inodes / new_size)); |
| } |
| if (new_size < (icount->size + 100)) |
| new_size = icount->size + 100; |
| #if 0 |
| printf("Reallocating icount %u entries...\n", new_size); |
| #endif |
| retval = ext2fs_resize_mem((size_t) icount->size * |
| sizeof(struct ext2_icount_el), |
| (size_t) new_size * |
| sizeof(struct ext2_icount_el), |
| &icount->list); |
| if (retval) |
| return 0; |
| icount->size = new_size; |
| } |
| num = (int) icount->count - pos; |
| if (num < 0) |
| return 0; /* should never happen */ |
| if (num) { |
| memmove(&icount->list[pos+1], &icount->list[pos], |
| sizeof(struct ext2_icount_el) * num); |
| } |
| icount->count++; |
| el = &icount->list[pos]; |
| el->count = 0; |
| el->ino = ino; |
| icount->last_lookup = el; |
| return el; |
| } |
| |
| /* |
| * get_icount_el() --- given an inode number, try to find icount |
| * information in the sorted list. If the create flag is set, |
| * and we can't find an entry, create one in the sorted list. |
| */ |
| static struct ext2_icount_el *get_icount_el(ext2_icount_t icount, |
| ext2_ino_t ino, int create) |
| { |
| float range; |
| int low, high, mid; |
| ext2_ino_t lowval, highval; |
| |
| if (!icount || !icount->list) |
| return 0; |
| |
| if (create && ((icount->count == 0) || |
| (ino > icount->list[(unsigned)icount->count-1].ino))) { |
| return insert_icount_el(icount, ino, (unsigned) icount->count); |
| } |
| if (icount->count == 0) |
| return 0; |
| |
| if (icount->cursor >= icount->count) |
| icount->cursor = 0; |
| if (ino == icount->list[icount->cursor].ino) |
| return &icount->list[icount->cursor++]; |
| #if 0 |
| printf("Non-cursor get_icount_el: %u\n", ino); |
| #endif |
| low = 0; |
| high = (int) icount->count-1; |
| while (low <= high) { |
| #if 0 |
| mid = (low+high)/2; |
| #else |
| if (low == high) |
| mid = low; |
| else { |
| /* Interpolate for efficiency */ |
| lowval = icount->list[low].ino; |
| highval = icount->list[high].ino; |
| |
| if (ino < lowval) |
| range = 0; |
| else if (ino > highval) |
| range = 1; |
| else { |
| range = ((float) (ino - lowval)) / |
| (highval - lowval); |
| if (range > 0.9) |
| range = 0.9; |
| if (range < 0.1) |
| range = 0.1; |
| } |
| mid = low + ((int) (range * (high-low))); |
| } |
| #endif |
| if (ino == icount->list[mid].ino) { |
| icount->cursor = mid+1; |
| return &icount->list[mid]; |
| } |
| if (ino < icount->list[mid].ino) |
| high = mid-1; |
| else |
| low = mid+1; |
| } |
| /* |
| * If we need to create a new entry, it should be right at |
| * low (where high will be left at low-1). |
| */ |
| if (create) |
| return insert_icount_el(icount, ino, low); |
| return 0; |
| } |
| |
| static errcode_t set_inode_count(ext2_icount_t icount, ext2_ino_t ino, |
| __u32 count) |
| { |
| struct ext2_icount_el *el; |
| TDB_DATA key, data; |
| |
| if (icount->tdb) { |
| key.dptr = (unsigned char *) &ino; |
| key.dsize = sizeof(ext2_ino_t); |
| data.dptr = (unsigned char *) &count; |
| data.dsize = sizeof(__u32); |
| if (count) { |
| if (tdb_store(icount->tdb, key, data, TDB_REPLACE)) |
| return tdb_error(icount->tdb) + |
| EXT2_ET_TDB_SUCCESS; |
| } else { |
| if (tdb_delete(icount->tdb, key)) |
| return tdb_error(icount->tdb) + |
| EXT2_ET_TDB_SUCCESS; |
| } |
| return 0; |
| } |
| |
| el = get_icount_el(icount, ino, 1); |
| if (!el) |
| return EXT2_ET_NO_MEMORY; |
| |
| el->count = count; |
| return 0; |
| } |
| |
| static errcode_t get_inode_count(ext2_icount_t icount, ext2_ino_t ino, |
| __u32 *count) |
| { |
| struct ext2_icount_el *el; |
| TDB_DATA key, data; |
| |
| if (icount->tdb) { |
| key.dptr = (unsigned char *) &ino; |
| key.dsize = sizeof(ext2_ino_t); |
| |
| data = tdb_fetch(icount->tdb, key); |
| if (data.dptr == NULL) { |
| *count = 0; |
| return tdb_error(icount->tdb) + EXT2_ET_TDB_SUCCESS; |
| } |
| |
| *count = *((__u32 *) data.dptr); |
| free(data.dptr); |
| return 0; |
| } |
| el = get_icount_el(icount, ino, 0); |
| if (!el) { |
| *count = 0; |
| return ENOENT; |
| } |
| |
| *count = el->count; |
| return 0; |
| } |
| |
| errcode_t ext2fs_icount_validate(ext2_icount_t icount, FILE *out) |
| { |
| errcode_t ret = 0; |
| unsigned int i; |
| const char *bad = "bad icount"; |
| |
| EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT); |
| |
| if (icount->count > icount->size) { |
| fprintf(out, "%s: count > size\n", bad); |
| return EXT2_ET_INVALID_ARGUMENT; |
| } |
| for (i=1; i < icount->count; i++) { |
| if (icount->list[i-1].ino >= icount->list[i].ino) { |
| fprintf(out, "%s: list[%d].ino=%u, list[%d].ino=%u\n", |
| bad, i-1, icount->list[i-1].ino, |
| i, icount->list[i].ino); |
| ret = EXT2_ET_INVALID_ARGUMENT; |
| } |
| } |
| return ret; |
| } |
| |
| errcode_t ext2fs_icount_fetch(ext2_icount_t icount, ext2_ino_t ino, __u16 *ret) |
| { |
| __u32 val; |
| EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT); |
| |
| if (!ino || (ino > icount->num_inodes)) |
| return EXT2_ET_INVALID_ARGUMENT; |
| |
| if (ext2fs_test_inode_bitmap(icount->single, ino)) { |
| *ret = 1; |
| return 0; |
| } |
| if (icount->multiple && |
| !ext2fs_test_inode_bitmap(icount->multiple, ino)) { |
| *ret = 0; |
| return 0; |
| } |
| get_inode_count(icount, ino, &val); |
| *ret = icount_16_xlate(val); |
| return 0; |
| } |
| |
| errcode_t ext2fs_icount_increment(ext2_icount_t icount, ext2_ino_t ino, |
| __u16 *ret) |
| { |
| __u32 curr_value; |
| |
| EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT); |
| |
| if (!ino || (ino > icount->num_inodes)) |
| return EXT2_ET_INVALID_ARGUMENT; |
| |
| if (ext2fs_test_inode_bitmap(icount->single, ino)) { |
| /* |
| * If the existing count is 1, then we know there is |
| * no entry in the list. |
| */ |
| if (set_inode_count(icount, ino, 2)) |
| return EXT2_ET_NO_MEMORY; |
| curr_value = 2; |
| ext2fs_unmark_inode_bitmap(icount->single, ino); |
| } else if (icount->multiple) { |
| /* |
| * The count is either zero or greater than 1; if the |
| * inode is set in icount->multiple, then there should |
| * be an entry in the list, so we need to fix it. |
| */ |
| if (ext2fs_test_inode_bitmap(icount->multiple, ino)) { |
| get_inode_count(icount, ino, &curr_value); |
| curr_value++; |
| if (set_inode_count(icount, ino, curr_value)) |
| return EXT2_ET_NO_MEMORY; |
| } else { |
| /* |
| * The count was zero; mark the single bitmap |
| * and return. |
| */ |
| ext2fs_mark_inode_bitmap(icount->single, ino); |
| if (ret) |
| *ret = 1; |
| return 0; |
| } |
| } else { |
| /* |
| * The count is either zero or greater than 1; try to |
| * find an entry in the list to determine which. |
| */ |
| get_inode_count(icount, ino, &curr_value); |
| curr_value++; |
| if (set_inode_count(icount, ino, curr_value)) |
| return EXT2_ET_NO_MEMORY; |
| } |
| if (icount->multiple) |
| ext2fs_mark_inode_bitmap(icount->multiple, ino); |
| if (ret) |
| *ret = icount_16_xlate(curr_value); |
| return 0; |
| } |
| |
| errcode_t ext2fs_icount_decrement(ext2_icount_t icount, ext2_ino_t ino, |
| __u16 *ret) |
| { |
| __u32 curr_value; |
| |
| if (!ino || (ino > icount->num_inodes)) |
| return EXT2_ET_INVALID_ARGUMENT; |
| |
| EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT); |
| |
| if (ext2fs_test_inode_bitmap(icount->single, ino)) { |
| ext2fs_unmark_inode_bitmap(icount->single, ino); |
| if (icount->multiple) |
| ext2fs_unmark_inode_bitmap(icount->multiple, ino); |
| else { |
| set_inode_count(icount, ino, 0); |
| } |
| if (ret) |
| *ret = 0; |
| return 0; |
| } |
| |
| if (icount->multiple && |
| !ext2fs_test_inode_bitmap(icount->multiple, ino)) |
| return EXT2_ET_INVALID_ARGUMENT; |
| |
| get_inode_count(icount, ino, &curr_value); |
| if (!curr_value) |
| return EXT2_ET_INVALID_ARGUMENT; |
| curr_value--; |
| if (set_inode_count(icount, ino, curr_value)) |
| return EXT2_ET_NO_MEMORY; |
| |
| if (curr_value == 1) |
| ext2fs_mark_inode_bitmap(icount->single, ino); |
| if ((curr_value == 0) && icount->multiple) |
| ext2fs_unmark_inode_bitmap(icount->multiple, ino); |
| |
| if (ret) |
| *ret = icount_16_xlate(curr_value); |
| return 0; |
| } |
| |
| errcode_t ext2fs_icount_store(ext2_icount_t icount, ext2_ino_t ino, |
| __u16 count) |
| { |
| if (!ino || (ino > icount->num_inodes)) |
| return EXT2_ET_INVALID_ARGUMENT; |
| |
| EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT); |
| |
| if (count == 1) { |
| ext2fs_mark_inode_bitmap(icount->single, ino); |
| if (icount->multiple) |
| ext2fs_unmark_inode_bitmap(icount->multiple, ino); |
| return 0; |
| } |
| if (count == 0) { |
| ext2fs_unmark_inode_bitmap(icount->single, ino); |
| if (icount->multiple) { |
| /* |
| * If the icount->multiple bitmap is enabled, |
| * we can just clear both bitmaps and we're done |
| */ |
| ext2fs_unmark_inode_bitmap(icount->multiple, ino); |
| } else |
| set_inode_count(icount, ino, 0); |
| return 0; |
| } |
| |
| if (set_inode_count(icount, ino, count)) |
| return EXT2_ET_NO_MEMORY; |
| ext2fs_unmark_inode_bitmap(icount->single, ino); |
| if (icount->multiple) |
| ext2fs_mark_inode_bitmap(icount->multiple, ino); |
| return 0; |
| } |
| |
| ext2_ino_t ext2fs_get_icount_size(ext2_icount_t icount) |
| { |
| if (!icount || icount->magic != EXT2_ET_MAGIC_ICOUNT) |
| return 0; |
| |
| return icount->size; |
| } |
| |
| #ifdef DEBUG |
| |
| ext2_filsys test_fs; |
| ext2_icount_t icount; |
| |
| #define EXIT 0x00 |
| #define FETCH 0x01 |
| #define STORE 0x02 |
| #define INCREMENT 0x03 |
| #define DECREMENT 0x04 |
| |
| struct test_program { |
| int cmd; |
| ext2_ino_t ino; |
| __u16 arg; |
| __u16 expected; |
| }; |
| |
| struct test_program prog[] = { |
| { STORE, 42, 42, 42 }, |
| { STORE, 1, 1, 1 }, |
| { STORE, 2, 2, 2 }, |
| { STORE, 3, 3, 3 }, |
| { STORE, 10, 1, 1 }, |
| { STORE, 42, 0, 0 }, |
| { INCREMENT, 5, 0, 1 }, |
| { INCREMENT, 5, 0, 2 }, |
| { INCREMENT, 5, 0, 3 }, |
| { INCREMENT, 5, 0, 4 }, |
| { DECREMENT, 5, 0, 3 }, |
| { DECREMENT, 5, 0, 2 }, |
| { DECREMENT, 5, 0, 1 }, |
| { DECREMENT, 5, 0, 0 }, |
| { FETCH, 10, 0, 1 }, |
| { FETCH, 1, 0, 1 }, |
| { FETCH, 2, 0, 2 }, |
| { FETCH, 3, 0, 3 }, |
| { INCREMENT, 1, 0, 2 }, |
| { DECREMENT, 2, 0, 1 }, |
| { DECREMENT, 2, 0, 0 }, |
| { FETCH, 12, 0, 0 }, |
| { EXIT, 0, 0, 0 } |
| }; |
| |
| struct test_program extended[] = { |
| { STORE, 1, 1, 1 }, |
| { STORE, 2, 2, 2 }, |
| { STORE, 3, 3, 3 }, |
| { STORE, 4, 4, 4 }, |
| { STORE, 5, 5, 5 }, |
| { STORE, 6, 1, 1 }, |
| { STORE, 7, 2, 2 }, |
| { STORE, 8, 3, 3 }, |
| { STORE, 9, 4, 4 }, |
| { STORE, 10, 5, 5 }, |
| { STORE, 11, 1, 1 }, |
| { STORE, 12, 2, 2 }, |
| { STORE, 13, 3, 3 }, |
| { STORE, 14, 4, 4 }, |
| { STORE, 15, 5, 5 }, |
| { STORE, 16, 1, 1 }, |
| { STORE, 17, 2, 2 }, |
| { STORE, 18, 3, 3 }, |
| { STORE, 19, 4, 4 }, |
| { STORE, 20, 5, 5 }, |
| { STORE, 21, 1, 1 }, |
| { STORE, 22, 2, 2 }, |
| { STORE, 23, 3, 3 }, |
| { STORE, 24, 4, 4 }, |
| { STORE, 25, 5, 5 }, |
| { STORE, 26, 1, 1 }, |
| { STORE, 27, 2, 2 }, |
| { STORE, 28, 3, 3 }, |
| { STORE, 29, 4, 4 }, |
| { STORE, 30, 5, 5 }, |
| { EXIT, 0, 0, 0 } |
| }; |
| |
| /* |
| * Setup the variables for doing the inode scan test. |
| */ |
| static void setup(void) |
| { |
| errcode_t retval; |
| struct ext2_super_block param; |
| |
| initialize_ext2_error_table(); |
| |
| memset(¶m, 0, sizeof(param)); |
| param.s_blocks_count = 12000; |
| |
| retval = ext2fs_initialize("test fs", 0, ¶m, |
| test_io_manager, &test_fs); |
| if (retval) { |
| com_err("setup", retval, |
| "while initializing filesystem"); |
| exit(1); |
| } |
| retval = ext2fs_allocate_tables(test_fs); |
| if (retval) { |
| com_err("setup", retval, |
| "while allocating tables for test filesystem"); |
| exit(1); |
| } |
| } |
| |
| int run_test(int flags, int size, char *dir, struct test_program *prog) |
| { |
| errcode_t retval; |
| ext2_icount_t icount; |
| struct test_program *pc; |
| __u16 result; |
| int problem = 0; |
| |
| if (dir) { |
| retval = ext2fs_create_icount_tdb(test_fs, dir, |
| flags, &icount); |
| if (retval) { |
| com_err("run_test", retval, |
| "while creating icount using tdb"); |
| exit(1); |
| } |
| } else { |
| retval = ext2fs_create_icount2(test_fs, flags, size, 0, |
| &icount); |
| if (retval) { |
| com_err("run_test", retval, "while creating icount"); |
| exit(1); |
| } |
| } |
| for (pc = prog; pc->cmd != EXIT; pc++) { |
| switch (pc->cmd) { |
| case FETCH: |
| printf("icount_fetch(%u) = ", pc->ino); |
| break; |
| case STORE: |
| retval = ext2fs_icount_store(icount, pc->ino, pc->arg); |
| if (retval) { |
| com_err("run_test", retval, |
| "while calling icount_store"); |
| exit(1); |
| } |
| printf("icount_store(%u, %u) = ", pc->ino, pc->arg); |
| break; |
| case INCREMENT: |
| retval = ext2fs_icount_increment(icount, pc->ino, 0); |
| if (retval) { |
| com_err("run_test", retval, |
| "while calling icount_increment"); |
| exit(1); |
| } |
| printf("icount_increment(%u) = ", pc->ino); |
| break; |
| case DECREMENT: |
| retval = ext2fs_icount_decrement(icount, pc->ino, 0); |
| if (retval) { |
| com_err("run_test", retval, |
| "while calling icount_decrement"); |
| exit(1); |
| } |
| printf("icount_decrement(%u) = ", pc->ino); |
| break; |
| } |
| retval = ext2fs_icount_fetch(icount, pc->ino, &result); |
| if (retval) { |
| com_err("run_test", retval, |
| "while calling icount_fetch"); |
| exit(1); |
| } |
| printf("%u (%s)\n", result, (result == pc->expected) ? |
| "OK" : "NOT OK"); |
| if (result != pc->expected) |
| problem++; |
| } |
| printf("icount size is %u\n", ext2fs_get_icount_size(icount)); |
| retval = ext2fs_icount_validate(icount, stdout); |
| if (retval) { |
| com_err("run_test", retval, "while calling icount_validate"); |
| exit(1); |
| } |
| ext2fs_free_icount(icount); |
| return problem; |
| } |
| |
| |
| int main(int argc, char **argv) |
| { |
| int failed = 0; |
| |
| setup(); |
| printf("Standard icount run:\n"); |
| failed += run_test(0, 0, 0, prog); |
| printf("\nMultiple bitmap test:\n"); |
| failed += run_test(EXT2_ICOUNT_OPT_INCREMENT, 0, 0, prog); |
| printf("\nResizing icount:\n"); |
| failed += run_test(0, 3, 0, extended); |
| printf("\nStandard icount run with tdb:\n"); |
| failed += run_test(0, 0, ".", prog); |
| printf("\nMultiple bitmap test with tdb:\n"); |
| failed += run_test(EXT2_ICOUNT_OPT_INCREMENT, 0, ".", prog); |
| if (failed) |
| printf("FAILED!\n"); |
| return failed; |
| } |
| #endif |