| The non-test part of the code is expected to have 2 failures. |
| |
| gtest_output_test_.cc:#: Failure |
| Value of: false |
| Actual: false |
| Expected: true |
| gtest_output_test_.cc:#: Failure |
| Value of: 3 |
| Expected: 2 |
| [0;32m[==========] [mRunning 62 tests from 27 test cases. |
| [0;32m[----------] [mGlobal test environment set-up. |
| FooEnvironment::SetUp() called. |
| BarEnvironment::SetUp() called. |
| [0;32m[----------] [m1 test from ADeathTest |
| [0;32m[ RUN ] [mADeathTest.ShouldRunFirst |
| [0;32m[ OK ] [mADeathTest.ShouldRunFirst |
| [0;32m[----------] [m1 test from ATypedDeathTest/0, where TypeParam = int |
| [0;32m[ RUN ] [mATypedDeathTest/0.ShouldRunFirst |
| [0;32m[ OK ] [mATypedDeathTest/0.ShouldRunFirst |
| [0;32m[----------] [m1 test from ATypedDeathTest/1, where TypeParam = double |
| [0;32m[ RUN ] [mATypedDeathTest/1.ShouldRunFirst |
| [0;32m[ OK ] [mATypedDeathTest/1.ShouldRunFirst |
| [0;32m[----------] [m1 test from My/ATypeParamDeathTest/0, where TypeParam = int |
| [0;32m[ RUN ] [mMy/ATypeParamDeathTest/0.ShouldRunFirst |
| [0;32m[ OK ] [mMy/ATypeParamDeathTest/0.ShouldRunFirst |
| [0;32m[----------] [m1 test from My/ATypeParamDeathTest/1, where TypeParam = double |
| [0;32m[ RUN ] [mMy/ATypeParamDeathTest/1.ShouldRunFirst |
| [0;32m[ OK ] [mMy/ATypeParamDeathTest/1.ShouldRunFirst |
| [0;32m[----------] [m2 tests from PassingTest |
| [0;32m[ RUN ] [mPassingTest.PassingTest1 |
| [0;32m[ OK ] [mPassingTest.PassingTest1 |
| [0;32m[ RUN ] [mPassingTest.PassingTest2 |
| [0;32m[ OK ] [mPassingTest.PassingTest2 |
| [0;32m[----------] [m3 tests from FatalFailureTest |
| [0;32m[ RUN ] [mFatalFailureTest.FatalFailureInSubroutine |
| (expecting a failure that x should be 1) |
| gtest_output_test_.cc:#: Failure |
| Value of: x |
| Actual: 2 |
| Expected: 1 |
| [0;31m[ FAILED ] [mFatalFailureTest.FatalFailureInSubroutine |
| [0;32m[ RUN ] [mFatalFailureTest.FatalFailureInNestedSubroutine |
| (expecting a failure that x should be 1) |
| gtest_output_test_.cc:#: Failure |
| Value of: x |
| Actual: 2 |
| Expected: 1 |
| [0;31m[ FAILED ] [mFatalFailureTest.FatalFailureInNestedSubroutine |
| [0;32m[ RUN ] [mFatalFailureTest.NonfatalFailureInSubroutine |
| (expecting a failure on false) |
| gtest_output_test_.cc:#: Failure |
| Value of: false |
| Actual: false |
| Expected: true |
| [0;31m[ FAILED ] [mFatalFailureTest.NonfatalFailureInSubroutine |
| [0;32m[----------] [m1 test from LoggingTest |
| [0;32m[ RUN ] [mLoggingTest.InterleavingLoggingAndAssertions |
| (expecting 2 failures on (3) >= (a[i])) |
| i == 0 |
| i == 1 |
| gtest_output_test_.cc:#: Failure |
| Expected: (3) >= (a[i]), actual: 3 vs 9 |
| i == 2 |
| i == 3 |
| gtest_output_test_.cc:#: Failure |
| Expected: (3) >= (a[i]), actual: 3 vs 6 |
| [0;31m[ FAILED ] [mLoggingTest.InterleavingLoggingAndAssertions |
| [0;32m[----------] [m6 tests from SCOPED_TRACETest |
| [0;32m[ RUN ] [mSCOPED_TRACETest.ObeysScopes |
| (expected to fail) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| This failure is expected, and shouldn't have a trace. |
| gtest_output_test_.cc:#: Failure |
| Failed |
| This failure is expected, and should have a trace. |
| Google Test trace: |
| gtest_output_test_.cc:#: Expected trace |
| gtest_output_test_.cc:#: Failure |
| Failed |
| This failure is expected, and shouldn't have a trace. |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.ObeysScopes |
| [0;32m[ RUN ] [mSCOPED_TRACETest.WorksInLoop |
| (expected to fail) |
| gtest_output_test_.cc:#: Failure |
| Value of: n |
| Actual: 1 |
| Expected: 2 |
| Google Test trace: |
| gtest_output_test_.cc:#: i = 1 |
| gtest_output_test_.cc:#: Failure |
| Value of: n |
| Actual: 2 |
| Expected: 1 |
| Google Test trace: |
| gtest_output_test_.cc:#: i = 2 |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.WorksInLoop |
| [0;32m[ RUN ] [mSCOPED_TRACETest.WorksInSubroutine |
| (expected to fail) |
| gtest_output_test_.cc:#: Failure |
| Value of: n |
| Actual: 1 |
| Expected: 2 |
| Google Test trace: |
| gtest_output_test_.cc:#: n = 1 |
| gtest_output_test_.cc:#: Failure |
| Value of: n |
| Actual: 2 |
| Expected: 1 |
| Google Test trace: |
| gtest_output_test_.cc:#: n = 2 |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.WorksInSubroutine |
| [0;32m[ RUN ] [mSCOPED_TRACETest.CanBeNested |
| (expected to fail) |
| gtest_output_test_.cc:#: Failure |
| Value of: n |
| Actual: 2 |
| Expected: 1 |
| Google Test trace: |
| gtest_output_test_.cc:#: n = 2 |
| gtest_output_test_.cc:#: |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.CanBeNested |
| [0;32m[ RUN ] [mSCOPED_TRACETest.CanBeRepeated |
| (expected to fail) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| This failure is expected, and should contain trace point A. |
| Google Test trace: |
| gtest_output_test_.cc:#: A |
| gtest_output_test_.cc:#: Failure |
| Failed |
| This failure is expected, and should contain trace point A and B. |
| Google Test trace: |
| gtest_output_test_.cc:#: B |
| gtest_output_test_.cc:#: A |
| gtest_output_test_.cc:#: Failure |
| Failed |
| This failure is expected, and should contain trace point A, B, and C. |
| Google Test trace: |
| gtest_output_test_.cc:#: C |
| gtest_output_test_.cc:#: B |
| gtest_output_test_.cc:#: A |
| gtest_output_test_.cc:#: Failure |
| Failed |
| This failure is expected, and should contain trace point A, B, and D. |
| Google Test trace: |
| gtest_output_test_.cc:#: D |
| gtest_output_test_.cc:#: B |
| gtest_output_test_.cc:#: A |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.CanBeRepeated |
| [0;32m[ RUN ] [mSCOPED_TRACETest.WorksConcurrently |
| (expecting 6 failures) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #1 (in thread B, only trace B alive). |
| Google Test trace: |
| gtest_output_test_.cc:#: Trace B |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #2 (in thread A, trace A & B both alive). |
| Google Test trace: |
| gtest_output_test_.cc:#: Trace A |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #3 (in thread B, trace A & B both alive). |
| Google Test trace: |
| gtest_output_test_.cc:#: Trace B |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #4 (in thread B, only trace A alive). |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #5 (in thread A, only trace A alive). |
| Google Test trace: |
| gtest_output_test_.cc:#: Trace A |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #6 (in thread A, no trace alive). |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.WorksConcurrently |
| [0;32m[----------] [m1 test from NonFatalFailureInFixtureConstructorTest |
| [0;32m[ RUN ] [mNonFatalFailureInFixtureConstructorTest.FailureInConstructor |
| (expecting 5 failures) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #1, in the test fixture c'tor. |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #2, in SetUp(). |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #3, in the test body. |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #4, in TearDown. |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #5, in the test fixture d'tor. |
| [0;31m[ FAILED ] [mNonFatalFailureInFixtureConstructorTest.FailureInConstructor |
| [0;32m[----------] [m1 test from FatalFailureInFixtureConstructorTest |
| [0;32m[ RUN ] [mFatalFailureInFixtureConstructorTest.FailureInConstructor |
| (expecting 2 failures) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #1, in the test fixture c'tor. |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #2, in the test fixture d'tor. |
| [0;31m[ FAILED ] [mFatalFailureInFixtureConstructorTest.FailureInConstructor |
| [0;32m[----------] [m1 test from NonFatalFailureInSetUpTest |
| [0;32m[ RUN ] [mNonFatalFailureInSetUpTest.FailureInSetUp |
| (expecting 4 failures) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #1, in SetUp(). |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #2, in the test function. |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #3, in TearDown(). |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #4, in the test fixture d'tor. |
| [0;31m[ FAILED ] [mNonFatalFailureInSetUpTest.FailureInSetUp |
| [0;32m[----------] [m1 test from FatalFailureInSetUpTest |
| [0;32m[ RUN ] [mFatalFailureInSetUpTest.FailureInSetUp |
| (expecting 3 failures) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #1, in SetUp(). |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #2, in TearDown(). |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected failure #3, in the test fixture d'tor. |
| [0;31m[ FAILED ] [mFatalFailureInSetUpTest.FailureInSetUp |
| [0;32m[----------] [m1 test from AddFailureAtTest |
| [0;32m[ RUN ] [mAddFailureAtTest.MessageContainsSpecifiedFileAndLineNumber |
| foo.cc:42: Failure |
| Failed |
| Expected failure in foo.cc |
| [0;31m[ FAILED ] [mAddFailureAtTest.MessageContainsSpecifiedFileAndLineNumber |
| [0;32m[----------] [m4 tests from MixedUpTestCaseTest |
| [0;32m[ RUN ] [mMixedUpTestCaseTest.FirstTestFromNamespaceFoo |
| [0;32m[ OK ] [mMixedUpTestCaseTest.FirstTestFromNamespaceFoo |
| [0;32m[ RUN ] [mMixedUpTestCaseTest.SecondTestFromNamespaceFoo |
| [0;32m[ OK ] [mMixedUpTestCaseTest.SecondTestFromNamespaceFoo |
| [0;32m[ RUN ] [mMixedUpTestCaseTest.ThisShouldFail |
| gtest.cc:#: Failure |
| Failed |
| All tests in the same test case must use the same test fixture |
| class. However, in test case MixedUpTestCaseTest, |
| you defined test FirstTestFromNamespaceFoo and test ThisShouldFail |
| using two different test fixture classes. This can happen if |
| the two classes are from different namespaces or translation |
| units and have the same name. You should probably rename one |
| of the classes to put the tests into different test cases. |
| [0;31m[ FAILED ] [mMixedUpTestCaseTest.ThisShouldFail |
| [0;32m[ RUN ] [mMixedUpTestCaseTest.ThisShouldFailToo |
| gtest.cc:#: Failure |
| Failed |
| All tests in the same test case must use the same test fixture |
| class. However, in test case MixedUpTestCaseTest, |
| you defined test FirstTestFromNamespaceFoo and test ThisShouldFailToo |
| using two different test fixture classes. This can happen if |
| the two classes are from different namespaces or translation |
| units and have the same name. You should probably rename one |
| of the classes to put the tests into different test cases. |
| [0;31m[ FAILED ] [mMixedUpTestCaseTest.ThisShouldFailToo |
| [0;32m[----------] [m2 tests from MixedUpTestCaseWithSameTestNameTest |
| [0;32m[ RUN ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
| [0;32m[ OK ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
| [0;32m[ RUN ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
| gtest.cc:#: Failure |
| Failed |
| All tests in the same test case must use the same test fixture |
| class. However, in test case MixedUpTestCaseWithSameTestNameTest, |
| you defined test TheSecondTestWithThisNameShouldFail and test TheSecondTestWithThisNameShouldFail |
| using two different test fixture classes. This can happen if |
| the two classes are from different namespaces or translation |
| units and have the same name. You should probably rename one |
| of the classes to put the tests into different test cases. |
| [0;31m[ FAILED ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
| [0;32m[----------] [m2 tests from TEST_F_before_TEST_in_same_test_case |
| [0;32m[ RUN ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTEST_F |
| [0;32m[ OK ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTEST_F |
| [0;32m[ RUN ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTESTAndShouldFail |
| gtest.cc:#: Failure |
| Failed |
| All tests in the same test case must use the same test fixture |
| class, so mixing TEST_F and TEST in the same test case is |
| illegal. In test case TEST_F_before_TEST_in_same_test_case, |
| test DefinedUsingTEST_F is defined using TEST_F but |
| test DefinedUsingTESTAndShouldFail is defined using TEST. You probably |
| want to change the TEST to TEST_F or move it to another test |
| case. |
| [0;31m[ FAILED ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTESTAndShouldFail |
| [0;32m[----------] [m2 tests from TEST_before_TEST_F_in_same_test_case |
| [0;32m[ RUN ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST |
| [0;32m[ OK ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST |
| [0;32m[ RUN ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST_FAndShouldFail |
| gtest.cc:#: Failure |
| Failed |
| All tests in the same test case must use the same test fixture |
| class, so mixing TEST_F and TEST in the same test case is |
| illegal. In test case TEST_before_TEST_F_in_same_test_case, |
| test DefinedUsingTEST_FAndShouldFail is defined using TEST_F but |
| test DefinedUsingTEST is defined using TEST. You probably |
| want to change the TEST to TEST_F or move it to another test |
| case. |
| [0;31m[ FAILED ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST_FAndShouldFail |
| [0;32m[----------] [m8 tests from ExpectNonfatalFailureTest |
| [0;32m[ RUN ] [mExpectNonfatalFailureTest.CanReferenceGlobalVariables |
| [0;32m[ OK ] [mExpectNonfatalFailureTest.CanReferenceGlobalVariables |
| [0;32m[ RUN ] [mExpectNonfatalFailureTest.CanReferenceLocalVariables |
| [0;32m[ OK ] [mExpectNonfatalFailureTest.CanReferenceLocalVariables |
| [0;32m[ RUN ] [mExpectNonfatalFailureTest.SucceedsWhenThereIsOneNonfatalFailure |
| [0;32m[ OK ] [mExpectNonfatalFailureTest.SucceedsWhenThereIsOneNonfatalFailure |
| [0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenThereIsNoNonfatalFailure |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: 0 failures |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereIsNoNonfatalFailure |
| [0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenThereAreTwoNonfatalFailures |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: 2 failures |
| gtest_output_test_.cc:#: Non-fatal failure: |
| Failed |
| Expected non-fatal failure 1. |
| |
| gtest_output_test_.cc:#: Non-fatal failure: |
| Failed |
| Expected non-fatal failure 2. |
| |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereAreTwoNonfatalFailures |
| [0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenThereIsOneFatalFailure |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Fatal failure: |
| Failed |
| Expected fatal failure. |
| |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereIsOneFatalFailure |
| [0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenStatementReturns |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: 0 failures |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenStatementReturns |
| [0;32m[ RUN ] [mExpectNonfatalFailureTest.FailsWhenStatementThrows |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: 0 failures |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenStatementThrows |
| [0;32m[----------] [m8 tests from ExpectFatalFailureTest |
| [0;32m[ RUN ] [mExpectFatalFailureTest.CanReferenceGlobalVariables |
| [0;32m[ OK ] [mExpectFatalFailureTest.CanReferenceGlobalVariables |
| [0;32m[ RUN ] [mExpectFatalFailureTest.CanReferenceLocalStaticVariables |
| [0;32m[ OK ] [mExpectFatalFailureTest.CanReferenceLocalStaticVariables |
| [0;32m[ RUN ] [mExpectFatalFailureTest.SucceedsWhenThereIsOneFatalFailure |
| [0;32m[ OK ] [mExpectFatalFailureTest.SucceedsWhenThereIsOneFatalFailure |
| [0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenThereIsNoFatalFailure |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: 0 failures |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereIsNoFatalFailure |
| [0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenThereAreTwoFatalFailures |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: 2 failures |
| gtest_output_test_.cc:#: Fatal failure: |
| Failed |
| Expected fatal failure. |
| |
| gtest_output_test_.cc:#: Fatal failure: |
| Failed |
| Expected fatal failure. |
| |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereAreTwoFatalFailures |
| [0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenThereIsOneNonfatalFailure |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Non-fatal failure: |
| Failed |
| Expected non-fatal failure. |
| |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereIsOneNonfatalFailure |
| [0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenStatementReturns |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: 0 failures |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenStatementReturns |
| [0;32m[ RUN ] [mExpectFatalFailureTest.FailsWhenStatementThrows |
| (expecting a failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: 0 failures |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenStatementThrows |
| [0;32m[----------] [m2 tests from TypedTest/0, where TypeParam = int |
| [0;32m[ RUN ] [mTypedTest/0.Success |
| [0;32m[ OK ] [mTypedTest/0.Success |
| [0;32m[ RUN ] [mTypedTest/0.Failure |
| gtest_output_test_.cc:#: Failure |
| Value of: TypeParam() |
| Actual: 0 |
| Expected: 1 |
| Expected failure |
| [0;31m[ FAILED ] [mTypedTest/0.Failure, where TypeParam = int |
| [0;32m[----------] [m2 tests from Unsigned/TypedTestP/0, where TypeParam = unsigned char |
| [0;32m[ RUN ] [mUnsigned/TypedTestP/0.Success |
| [0;32m[ OK ] [mUnsigned/TypedTestP/0.Success |
| [0;32m[ RUN ] [mUnsigned/TypedTestP/0.Failure |
| gtest_output_test_.cc:#: Failure |
| Value of: TypeParam() |
| Actual: '\0' |
| Expected: 1U |
| Which is: 1 |
| Expected failure |
| [0;31m[ FAILED ] [mUnsigned/TypedTestP/0.Failure, where TypeParam = unsigned char |
| [0;32m[----------] [m2 tests from Unsigned/TypedTestP/1, where TypeParam = unsigned int |
| [0;32m[ RUN ] [mUnsigned/TypedTestP/1.Success |
| [0;32m[ OK ] [mUnsigned/TypedTestP/1.Success |
| [0;32m[ RUN ] [mUnsigned/TypedTestP/1.Failure |
| gtest_output_test_.cc:#: Failure |
| Value of: TypeParam() |
| Actual: 0 |
| Expected: 1U |
| Which is: 1 |
| Expected failure |
| [0;31m[ FAILED ] [mUnsigned/TypedTestP/1.Failure, where TypeParam = unsigned int |
| [0;32m[----------] [m4 tests from ExpectFailureTest |
| [0;32m[ RUN ] [mExpectFailureTest.ExpectFatalFailure |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Success: |
| Succeeded |
| |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Non-fatal failure: |
| Failed |
| Expected non-fatal failure. |
| |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure containing "Some other fatal failure expected." |
| Actual: |
| gtest_output_test_.cc:#: Fatal failure: |
| Failed |
| Expected fatal failure. |
| |
| [0;31m[ FAILED ] [mExpectFailureTest.ExpectFatalFailure |
| [0;32m[ RUN ] [mExpectFailureTest.ExpectNonFatalFailure |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Success: |
| Succeeded |
| |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Fatal failure: |
| Failed |
| Expected fatal failure. |
| |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure containing "Some other non-fatal failure." |
| Actual: |
| gtest_output_test_.cc:#: Non-fatal failure: |
| Failed |
| Expected non-fatal failure. |
| |
| [0;31m[ FAILED ] [mExpectFailureTest.ExpectNonFatalFailure |
| [0;32m[ RUN ] [mExpectFailureTest.ExpectFatalFailureOnAllThreads |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Success: |
| Succeeded |
| |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Non-fatal failure: |
| Failed |
| Expected non-fatal failure. |
| |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure containing "Some other fatal failure expected." |
| Actual: |
| gtest_output_test_.cc:#: Fatal failure: |
| Failed |
| Expected fatal failure. |
| |
| [0;31m[ FAILED ] [mExpectFailureTest.ExpectFatalFailureOnAllThreads |
| [0;32m[ RUN ] [mExpectFailureTest.ExpectNonFatalFailureOnAllThreads |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Success: |
| Succeeded |
| |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: |
| gtest_output_test_.cc:#: Fatal failure: |
| Failed |
| Expected fatal failure. |
| |
| (expecting 1 failure) |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure containing "Some other non-fatal failure." |
| Actual: |
| gtest_output_test_.cc:#: Non-fatal failure: |
| Failed |
| Expected non-fatal failure. |
| |
| [0;31m[ FAILED ] [mExpectFailureTest.ExpectNonFatalFailureOnAllThreads |
| [0;32m[----------] [m2 tests from ExpectFailureWithThreadsTest |
| [0;32m[ RUN ] [mExpectFailureWithThreadsTest.ExpectFatalFailure |
| (expecting 2 failures) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected fatal failure. |
| gtest.cc:#: Failure |
| Expected: 1 fatal failure |
| Actual: 0 failures |
| [0;31m[ FAILED ] [mExpectFailureWithThreadsTest.ExpectFatalFailure |
| [0;32m[ RUN ] [mExpectFailureWithThreadsTest.ExpectNonFatalFailure |
| (expecting 2 failures) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected non-fatal failure. |
| gtest.cc:#: Failure |
| Expected: 1 non-fatal failure |
| Actual: 0 failures |
| [0;31m[ FAILED ] [mExpectFailureWithThreadsTest.ExpectNonFatalFailure |
| [0;32m[----------] [m1 test from ScopedFakeTestPartResultReporterTest |
| [0;32m[ RUN ] [mScopedFakeTestPartResultReporterTest.InterceptOnlyCurrentThread |
| (expecting 2 failures) |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected fatal failure. |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected non-fatal failure. |
| [0;31m[ FAILED ] [mScopedFakeTestPartResultReporterTest.InterceptOnlyCurrentThread |
| [0;32m[----------] [m1 test from PrintingFailingParams/FailingParamTest |
| [0;32m[ RUN ] [mPrintingFailingParams/FailingParamTest.Fails/0 |
| gtest_output_test_.cc:#: Failure |
| Value of: GetParam() |
| Actual: 2 |
| Expected: 1 |
| [0;31m[ FAILED ] [mPrintingFailingParams/FailingParamTest.Fails/0, where GetParam() = 2 |
| [0;32m[----------] [mGlobal test environment tear-down |
| BarEnvironment::TearDown() called. |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected non-fatal failure. |
| FooEnvironment::TearDown() called. |
| gtest_output_test_.cc:#: Failure |
| Failed |
| Expected fatal failure. |
| [0;32m[==========] [m62 tests from 27 test cases ran. |
| [0;32m[ PASSED ] [m21 tests. |
| [0;31m[ FAILED ] [m41 tests, listed below: |
| [0;31m[ FAILED ] [mFatalFailureTest.FatalFailureInSubroutine |
| [0;31m[ FAILED ] [mFatalFailureTest.FatalFailureInNestedSubroutine |
| [0;31m[ FAILED ] [mFatalFailureTest.NonfatalFailureInSubroutine |
| [0;31m[ FAILED ] [mLoggingTest.InterleavingLoggingAndAssertions |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.ObeysScopes |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.WorksInLoop |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.WorksInSubroutine |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.CanBeNested |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.CanBeRepeated |
| [0;31m[ FAILED ] [mSCOPED_TRACETest.WorksConcurrently |
| [0;31m[ FAILED ] [mNonFatalFailureInFixtureConstructorTest.FailureInConstructor |
| [0;31m[ FAILED ] [mFatalFailureInFixtureConstructorTest.FailureInConstructor |
| [0;31m[ FAILED ] [mNonFatalFailureInSetUpTest.FailureInSetUp |
| [0;31m[ FAILED ] [mFatalFailureInSetUpTest.FailureInSetUp |
| [0;31m[ FAILED ] [mAddFailureAtTest.MessageContainsSpecifiedFileAndLineNumber |
| [0;31m[ FAILED ] [mMixedUpTestCaseTest.ThisShouldFail |
| [0;31m[ FAILED ] [mMixedUpTestCaseTest.ThisShouldFailToo |
| [0;31m[ FAILED ] [mMixedUpTestCaseWithSameTestNameTest.TheSecondTestWithThisNameShouldFail |
| [0;31m[ FAILED ] [mTEST_F_before_TEST_in_same_test_case.DefinedUsingTESTAndShouldFail |
| [0;31m[ FAILED ] [mTEST_before_TEST_F_in_same_test_case.DefinedUsingTEST_FAndShouldFail |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereIsNoNonfatalFailure |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereAreTwoNonfatalFailures |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenThereIsOneFatalFailure |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenStatementReturns |
| [0;31m[ FAILED ] [mExpectNonfatalFailureTest.FailsWhenStatementThrows |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereIsNoFatalFailure |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereAreTwoFatalFailures |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenThereIsOneNonfatalFailure |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenStatementReturns |
| [0;31m[ FAILED ] [mExpectFatalFailureTest.FailsWhenStatementThrows |
| [0;31m[ FAILED ] [mTypedTest/0.Failure, where TypeParam = int |
| [0;31m[ FAILED ] [mUnsigned/TypedTestP/0.Failure, where TypeParam = unsigned char |
| [0;31m[ FAILED ] [mUnsigned/TypedTestP/1.Failure, where TypeParam = unsigned int |
| [0;31m[ FAILED ] [mExpectFailureTest.ExpectFatalFailure |
| [0;31m[ FAILED ] [mExpectFailureTest.ExpectNonFatalFailure |
| [0;31m[ FAILED ] [mExpectFailureTest.ExpectFatalFailureOnAllThreads |
| [0;31m[ FAILED ] [mExpectFailureTest.ExpectNonFatalFailureOnAllThreads |
| [0;31m[ FAILED ] [mExpectFailureWithThreadsTest.ExpectFatalFailure |
| [0;31m[ FAILED ] [mExpectFailureWithThreadsTest.ExpectNonFatalFailure |
| [0;31m[ FAILED ] [mScopedFakeTestPartResultReporterTest.InterceptOnlyCurrentThread |
| [0;31m[ FAILED ] [mPrintingFailingParams/FailingParamTest.Fails/0, where GetParam() = 2 |
| |
| 41 FAILED TESTS |
| [0;33m YOU HAVE 1 DISABLED TEST |
| |
| [mNote: Google Test filter = FatalFailureTest.*:LoggingTest.* |
| [==========] Running 4 tests from 2 test cases. |
| [----------] Global test environment set-up. |
| [----------] 3 tests from FatalFailureTest |
| [ RUN ] FatalFailureTest.FatalFailureInSubroutine |
| (expecting a failure that x should be 1) |
| gtest_output_test_.cc:#: Failure |
| Value of: x |
| Actual: 2 |
| Expected: 1 |
| [ FAILED ] FatalFailureTest.FatalFailureInSubroutine (? ms) |
| [ RUN ] FatalFailureTest.FatalFailureInNestedSubroutine |
| (expecting a failure that x should be 1) |
| gtest_output_test_.cc:#: Failure |
| Value of: x |
| Actual: 2 |
| Expected: 1 |
| [ FAILED ] FatalFailureTest.FatalFailureInNestedSubroutine (? ms) |
| [ RUN ] FatalFailureTest.NonfatalFailureInSubroutine |
| (expecting a failure on false) |
| gtest_output_test_.cc:#: Failure |
| Value of: false |
| Actual: false |
| Expected: true |
| [ FAILED ] FatalFailureTest.NonfatalFailureInSubroutine (? ms) |
| [----------] 3 tests from FatalFailureTest (? ms total) |
| |
| [----------] 1 test from LoggingTest |
| [ RUN ] LoggingTest.InterleavingLoggingAndAssertions |
| (expecting 2 failures on (3) >= (a[i])) |
| i == 0 |
| i == 1 |
| gtest_output_test_.cc:#: Failure |
| Expected: (3) >= (a[i]), actual: 3 vs 9 |
| i == 2 |
| i == 3 |
| gtest_output_test_.cc:#: Failure |
| Expected: (3) >= (a[i]), actual: 3 vs 6 |
| [ FAILED ] LoggingTest.InterleavingLoggingAndAssertions (? ms) |
| [----------] 1 test from LoggingTest (? ms total) |
| |
| [----------] Global test environment tear-down |
| [==========] 4 tests from 2 test cases ran. (? ms total) |
| [ PASSED ] 0 tests. |
| [ FAILED ] 4 tests, listed below: |
| [ FAILED ] FatalFailureTest.FatalFailureInSubroutine |
| [ FAILED ] FatalFailureTest.FatalFailureInNestedSubroutine |
| [ FAILED ] FatalFailureTest.NonfatalFailureInSubroutine |
| [ FAILED ] LoggingTest.InterleavingLoggingAndAssertions |
| |
| 4 FAILED TESTS |
| YOU HAVE 1 DISABLED TEST |
| |
| Note: Google Test filter = *DISABLED_* |
| [==========] Running 1 test from 1 test case. |
| [----------] Global test environment set-up. |
| [----------] 1 test from DisabledTestsWarningTest |
| [ RUN ] DisabledTestsWarningTest.DISABLED_AlsoRunDisabledTestsFlagSuppressesWarning |
| [ OK ] DisabledTestsWarningTest.DISABLED_AlsoRunDisabledTestsFlagSuppressesWarning |
| [----------] Global test environment tear-down |
| [==========] 1 test from 1 test case ran. |
| [ PASSED ] 1 test. |
| Note: Google Test filter = PassingTest.* |
| Note: This is test shard 2 of 2. |
| [==========] Running 1 test from 1 test case. |
| [----------] Global test environment set-up. |
| [----------] 1 test from PassingTest |
| [ RUN ] PassingTest.PassingTest2 |
| [ OK ] PassingTest.PassingTest2 |
| [----------] Global test environment tear-down |
| [==========] 1 test from 1 test case ran. |
| [ PASSED ] 1 test. |
| |
| YOU HAVE 1 DISABLED TEST |
| |
