| /* |
| * Copyright © 2011,2012 Google, Inc. |
| * |
| * This is part of HarfBuzz, a text shaping library. |
| * |
| * Permission is hereby granted, without written agreement and without |
| * license or royalty fees, to use, copy, modify, and distribute this |
| * software and its documentation for any purpose, provided that the |
| * above copyright notice and the following two paragraphs appear in |
| * all copies of this software. |
| * |
| * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR |
| * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES |
| * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN |
| * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| * |
| * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, |
| * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND |
| * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS |
| * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO |
| * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. |
| * |
| * Google Author(s): Behdad Esfahbod |
| */ |
| |
| #include "hb-ot-shape-complex-indic-private.hh" |
| #include "hb-ot-layout-private.hh" |
| |
| /* buffer var allocations */ |
| #define indic_category() complex_var_u8_0() /* indic_category_t */ |
| #define indic_position() complex_var_u8_1() /* indic_position_t */ |
| |
| |
| /* |
| * Indic shaper. |
| */ |
| |
| |
| #define IN_HALF_BLOCK(u, Base) (((u) & ~0x7F) == (Base)) |
| |
| #define IS_DEVA(u) (IN_HALF_BLOCK (u, 0x0900)) |
| #define IS_BENG(u) (IN_HALF_BLOCK (u, 0x0980)) |
| #define IS_GURU(u) (IN_HALF_BLOCK (u, 0x0A00)) |
| #define IS_GUJR(u) (IN_HALF_BLOCK (u, 0x0A80)) |
| #define IS_ORYA(u) (IN_HALF_BLOCK (u, 0x0B00)) |
| #define IS_TAML(u) (IN_HALF_BLOCK (u, 0x0B80)) |
| #define IS_TELU(u) (IN_HALF_BLOCK (u, 0x0C00)) |
| #define IS_KNDA(u) (IN_HALF_BLOCK (u, 0x0C80)) |
| #define IS_MLYM(u) (IN_HALF_BLOCK (u, 0x0D00)) |
| #define IS_SINH(u) (IN_HALF_BLOCK (u, 0x0D80)) |
| #define IS_KHMR(u) (IN_HALF_BLOCK (u, 0x1780)) |
| |
| |
| #define MATRA_POS_LEFT(u) POS_PRE_M |
| #define MATRA_POS_RIGHT(u) ( \ |
| IS_DEVA(u) ? POS_AFTER_SUB : \ |
| IS_BENG(u) ? POS_AFTER_POST : \ |
| IS_GURU(u) ? POS_AFTER_POST : \ |
| IS_GUJR(u) ? POS_AFTER_POST : \ |
| IS_ORYA(u) ? POS_AFTER_POST : \ |
| IS_TAML(u) ? POS_AFTER_POST : \ |
| IS_TELU(u) ? (u <= 0x0C42 ? POS_BEFORE_SUB : POS_AFTER_SUB) : \ |
| IS_KNDA(u) ? (u < 0x0CC3 || u > 0xCD6 ? POS_BEFORE_SUB : POS_AFTER_SUB) : \ |
| IS_MLYM(u) ? POS_AFTER_POST : \ |
| IS_SINH(u) ? POS_AFTER_SUB : \ |
| IS_KHMR(u) ? POS_AFTER_POST : \ |
| /*default*/ POS_AFTER_SUB \ |
| ) |
| #define MATRA_POS_TOP(u) ( /* BENG and MLYM don't have top matras. */ \ |
| IS_DEVA(u) ? POS_AFTER_SUB : \ |
| IS_GURU(u) ? POS_AFTER_POST : /* Deviate from spec */ \ |
| IS_GUJR(u) ? POS_AFTER_SUB : \ |
| IS_ORYA(u) ? POS_AFTER_MAIN : \ |
| IS_TAML(u) ? POS_AFTER_SUB : \ |
| IS_TELU(u) ? POS_BEFORE_SUB : \ |
| IS_KNDA(u) ? POS_BEFORE_SUB : \ |
| IS_SINH(u) ? POS_AFTER_SUB : \ |
| IS_KHMR(u) ? POS_AFTER_POST : \ |
| /*default*/ POS_AFTER_SUB \ |
| ) |
| #define MATRA_POS_BOTTOM(u) ( \ |
| IS_DEVA(u) ? POS_AFTER_SUB : \ |
| IS_BENG(u) ? POS_AFTER_SUB : \ |
| IS_GURU(u) ? POS_AFTER_POST : \ |
| IS_GUJR(u) ? POS_AFTER_POST : \ |
| IS_ORYA(u) ? POS_AFTER_SUB : \ |
| IS_TAML(u) ? POS_AFTER_POST : \ |
| IS_TELU(u) ? POS_BEFORE_SUB : \ |
| IS_KNDA(u) ? POS_BEFORE_SUB : \ |
| IS_MLYM(u) ? POS_AFTER_POST : \ |
| IS_SINH(u) ? POS_AFTER_SUB : \ |
| IS_KHMR(u) ? POS_AFTER_POST : \ |
| /*default*/ POS_AFTER_SUB \ |
| ) |
| |
| static inline indic_position_t |
| matra_position (hb_codepoint_t u, indic_position_t side) |
| { |
| switch ((int) side) |
| { |
| case POS_PRE_C: return MATRA_POS_LEFT (u); |
| case POS_POST_C: return MATRA_POS_RIGHT (u); |
| case POS_ABOVE_C: return MATRA_POS_TOP (u); |
| case POS_BELOW_C: return MATRA_POS_BOTTOM (u); |
| }; |
| return side; |
| } |
| |
| /* XXX |
| * This is a hack for now. We should move this data into the main Indic table. |
| * Or completely remove it and just check in the tables. |
| */ |
| static const hb_codepoint_t ra_chars[] = { |
| 0x0930, /* Devanagari */ |
| 0x09B0, /* Bengali */ |
| 0x09F0, /* Bengali */ |
| 0x0A30, /* Gurmukhi */ /* No Reph */ |
| 0x0AB0, /* Gujarati */ |
| 0x0B30, /* Oriya */ |
| 0x0BB0, /* Tamil */ /* No Reph */ |
| 0x0C30, /* Telugu */ /* Reph formed only with ZWJ */ |
| 0x0CB0, /* Kannada */ |
| 0x0D30, /* Malayalam */ /* No Reph, Logical Repha */ |
| |
| 0x0DBB, /* Sinhala */ /* Reph formed only with ZWJ */ |
| |
| 0x179A, /* Khmer */ /* No Reph, Visual Repha */ |
| }; |
| |
| static inline indic_position_t |
| consonant_position (hb_codepoint_t u) |
| { |
| if ((u & ~0x007F) == 0x1780) |
| return POS_BELOW_C; /* In Khmer coeng model, post and below forms should not be reordered. */ |
| return POS_BASE_C; /* Will recategorize later based on font lookups. */ |
| } |
| |
| static inline bool |
| is_ra (hb_codepoint_t u) |
| { |
| for (unsigned int i = 0; i < ARRAY_LENGTH (ra_chars); i++) |
| if (u == ra_chars[i]) |
| return true; |
| return false; |
| } |
| |
| static inline bool |
| is_one_of (const hb_glyph_info_t &info, unsigned int flags) |
| { |
| /* If it ligated, all bets are off. */ |
| if (is_a_ligature (info)) return false; |
| return !!(FLAG (info.indic_category()) & flags); |
| } |
| |
| #define JOINER_FLAGS (FLAG (OT_ZWJ) | FLAG (OT_ZWNJ)) |
| static inline bool |
| is_joiner (const hb_glyph_info_t &info) |
| { |
| return is_one_of (info, JOINER_FLAGS); |
| } |
| |
| /* Note: |
| * |
| * We treat Vowels and placeholders as if they were consonants. This is safe because Vowels |
| * cannot happen in a consonant syllable. The plus side however is, we can call the |
| * consonant syllable logic from the vowel syllable function and get it all right! */ |
| #define CONSONANT_FLAGS (FLAG (OT_C) | FLAG (OT_CM) | FLAG (OT_Ra) | FLAG (OT_V) | FLAG (OT_NBSP) | FLAG (OT_DOTTEDCIRCLE)) |
| static inline bool |
| is_consonant (const hb_glyph_info_t &info) |
| { |
| return is_one_of (info, CONSONANT_FLAGS); |
| } |
| |
| #define HALANT_OR_COENG_FLAGS (FLAG (OT_H) | FLAG (OT_Coeng)) |
| static inline bool |
| is_halant_or_coeng (const hb_glyph_info_t &info) |
| { |
| return is_one_of (info, HALANT_OR_COENG_FLAGS); |
| } |
| |
| static inline void |
| set_indic_properties (hb_glyph_info_t &info) |
| { |
| hb_codepoint_t u = info.codepoint; |
| unsigned int type = hb_indic_get_categories (u); |
| indic_category_t cat = (indic_category_t) (type & 0x7F); |
| indic_position_t pos = (indic_position_t) (type >> 8); |
| |
| |
| /* |
| * Re-assign category |
| */ |
| |
| |
| /* The spec says U+0952 is OT_A. However, testing shows that Uniscribe |
| * treats U+0951..U+0952 all as OT_VD. |
| * TESTS: |
| * U+092E,U+0947,U+0952 |
| * U+092E,U+0952,U+0947 |
| * U+092E,U+0947,U+0951 |
| * U+092E,U+0951,U+0947 |
| * */ |
| if (unlikely (hb_in_range<hb_codepoint_t> (u, 0x0951, 0x0954))) |
| cat = OT_VD; |
| |
| if (unlikely (u == 0x17D1)) |
| cat = OT_X; |
| if (cat == OT_X && |
| unlikely (hb_in_range<hb_codepoint_t> (u, 0x17CB, 0x17D3))) /* Khmer Various signs */ |
| { |
| /* These are like Top Matras. */ |
| cat = OT_M; |
| pos = POS_ABOVE_C; |
| } |
| if (u == 0x17C6) /* Khmer Bindu doesn't like to be repositioned. */ |
| cat = OT_N; |
| |
| if (unlikely (u == 0x17D2)) cat = OT_Coeng; /* Khmer coeng */ |
| else if (unlikely (u == 0x200C)) cat = OT_ZWNJ; |
| else if (unlikely (u == 0x200D)) cat = OT_ZWJ; |
| else if (unlikely (u == 0x25CC)) cat = OT_DOTTEDCIRCLE; |
| else if (unlikely (u == 0x0A71)) cat = OT_SM; /* GURMUKHI ADDAK. More like consonant medial. like 0A75. */ |
| |
| if (cat == OT_Repha) { |
| /* There are two kinds of characters marked as Repha: |
| * - The ones that are GenCat=Mn are already positioned visually, ie. after base. (eg. Khmer) |
| * - The ones that are GenCat=Lo is encoded logically, ie. beginning of syllable. (eg. Malayalam) |
| * |
| * We recategorize the first kind to look like a Nukta and attached to the base directly. |
| */ |
| if (_hb_glyph_info_get_general_category (&info) == HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK) |
| cat = OT_N; |
| } |
| |
| |
| |
| /* |
| * Re-assign position. |
| */ |
| |
| if ((FLAG (cat) & CONSONANT_FLAGS)) |
| { |
| pos = consonant_position (u); |
| if (is_ra (u)) |
| cat = OT_Ra; |
| } |
| else if (cat == OT_M) |
| { |
| pos = matra_position (u, pos); |
| } |
| else if (cat == OT_SM || cat == OT_VD) |
| { |
| pos = POS_SMVD; |
| } |
| |
| if (unlikely (u == 0x0B01)) pos = POS_BEFORE_SUB; /* Oriya Bindu is BeforeSub in the spec. */ |
| |
| |
| |
| info.indic_category() = cat; |
| info.indic_position() = pos; |
| } |
| |
| /* |
| * Things above this line should ideally be moved to the Indic table itself. |
| */ |
| |
| |
| /* |
| * Indic configurations. Note that we do not want to keep every single script-specific |
| * behavior in these tables necessarily. This should mainly be used for per-script |
| * properties that are cheaper keeping here, than in the code. Ie. if, say, one and |
| * only one script has an exception, that one script can be if'ed directly in the code, |
| * instead of adding a new flag in these structs. |
| */ |
| |
| enum base_position_t { |
| BASE_POS_FIRST, |
| BASE_POS_LAST |
| }; |
| enum reph_position_t { |
| REPH_POS_DEFAULT = POS_BEFORE_POST, |
| |
| REPH_POS_AFTER_MAIN = POS_AFTER_MAIN, |
| REPH_POS_BEFORE_SUB = POS_BEFORE_SUB, |
| REPH_POS_AFTER_SUB = POS_AFTER_SUB, |
| REPH_POS_BEFORE_POST = POS_BEFORE_POST, |
| REPH_POS_AFTER_POST = POS_AFTER_POST |
| }; |
| enum reph_mode_t { |
| REPH_MODE_IMPLICIT, /* Reph formed out of initial Ra,H sequence. */ |
| REPH_MODE_EXPLICIT, /* Reph formed out of initial Ra,H,ZWJ sequence. */ |
| REPH_MODE_VIS_REPHA, /* Encoded Repha character, no reordering needed. */ |
| REPH_MODE_LOG_REPHA /* Encoded Repha character, needs reordering. */ |
| }; |
| struct indic_config_t |
| { |
| hb_script_t script; |
| bool has_old_spec; |
| hb_codepoint_t virama; |
| base_position_t base_pos; |
| reph_position_t reph_pos; |
| reph_mode_t reph_mode; |
| }; |
| |
| static const indic_config_t indic_configs[] = |
| { |
| /* Default. Should be first. */ |
| {HB_SCRIPT_INVALID, false, 0,BASE_POS_LAST, REPH_POS_DEFAULT, REPH_MODE_IMPLICIT}, |
| {HB_SCRIPT_DEVANAGARI,true, 0x094D,BASE_POS_LAST, REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT}, |
| {HB_SCRIPT_BENGALI, true, 0x09CD,BASE_POS_LAST, REPH_POS_AFTER_SUB, REPH_MODE_IMPLICIT}, |
| {HB_SCRIPT_GURMUKHI, true, 0x0A4D,BASE_POS_LAST, REPH_POS_BEFORE_SUB, REPH_MODE_IMPLICIT}, |
| {HB_SCRIPT_GUJARATI, true, 0x0ACD,BASE_POS_LAST, REPH_POS_BEFORE_POST,REPH_MODE_IMPLICIT}, |
| {HB_SCRIPT_ORIYA, true, 0x0B4D,BASE_POS_LAST, REPH_POS_AFTER_MAIN, REPH_MODE_IMPLICIT}, |
| {HB_SCRIPT_TAMIL, true, 0x0BCD,BASE_POS_LAST, REPH_POS_AFTER_POST, REPH_MODE_IMPLICIT}, |
| {HB_SCRIPT_TELUGU, true, 0x0C4D,BASE_POS_LAST, REPH_POS_AFTER_POST, REPH_MODE_EXPLICIT}, |
| {HB_SCRIPT_KANNADA, true, 0x0CCD,BASE_POS_LAST, REPH_POS_AFTER_POST, REPH_MODE_IMPLICIT}, |
| {HB_SCRIPT_MALAYALAM, true, 0x0D4D,BASE_POS_LAST, REPH_POS_AFTER_MAIN, REPH_MODE_LOG_REPHA}, |
| {HB_SCRIPT_SINHALA, false,0x0DCA,BASE_POS_FIRST,REPH_POS_AFTER_MAIN, REPH_MODE_EXPLICIT}, |
| {HB_SCRIPT_KHMER, false,0x17D2,BASE_POS_FIRST,REPH_POS_DEFAULT, REPH_MODE_VIS_REPHA}, |
| }; |
| |
| |
| |
| /* |
| * Indic shaper. |
| */ |
| |
| struct feature_list_t { |
| hb_tag_t tag; |
| hb_ot_map_feature_flags_t flags; |
| }; |
| |
| static const feature_list_t |
| indic_features[] = |
| { |
| /* |
| * Basic features. |
| * These features are applied in order, one at a time, after initial_reordering. |
| */ |
| {HB_TAG('n','u','k','t'), F_COMBINE (F_MANUAL_JOINERS, F_GLOBAL)}, |
| {HB_TAG('a','k','h','n'), F_COMBINE (F_MANUAL_JOINERS, F_GLOBAL)}, |
| {HB_TAG('r','p','h','f'), F_COMBINE (F_MANUAL_JOINERS, F_NONE )}, |
| {HB_TAG('r','k','r','f'), F_COMBINE (F_MANUAL_JOINERS, F_GLOBAL)}, |
| {HB_TAG('p','r','e','f'), F_COMBINE (F_MANUAL_JOINERS, F_NONE )}, |
| {HB_TAG('b','l','w','f'), F_COMBINE (F_MANUAL_JOINERS, F_NONE )}, |
| {HB_TAG('h','a','l','f'), F_COMBINE (F_MANUAL_JOINERS, F_NONE )}, |
| {HB_TAG('a','b','v','f'), F_COMBINE (F_MANUAL_JOINERS, F_NONE )}, |
| {HB_TAG('p','s','t','f'), F_COMBINE (F_MANUAL_JOINERS, F_NONE )}, |
| {HB_TAG('c','f','a','r'), F_COMBINE (F_MANUAL_JOINERS, F_NONE )}, |
| {HB_TAG('v','a','t','u'), F_COMBINE (F_MANUAL_JOINERS, F_GLOBAL)}, |
| {HB_TAG('c','j','c','t'), F_COMBINE (F_MANUAL_JOINERS, F_GLOBAL)}, |
| /* |
| * Other features. |
| * These features are applied all at once, after final_reordering. |
| */ |
| {HB_TAG('i','n','i','t'), F_NONE}, |
| {HB_TAG('p','r','e','s'), F_GLOBAL}, |
| {HB_TAG('a','b','v','s'), F_GLOBAL}, |
| {HB_TAG('b','l','w','s'), F_GLOBAL}, |
| {HB_TAG('p','s','t','s'), F_GLOBAL}, |
| {HB_TAG('h','a','l','n'), F_GLOBAL}, |
| /* Positioning features, though we don't care about the types. */ |
| {HB_TAG('d','i','s','t'), F_GLOBAL}, |
| {HB_TAG('a','b','v','m'), F_GLOBAL}, |
| {HB_TAG('b','l','w','m'), F_GLOBAL}, |
| }; |
| |
| /* |
| * Must be in the same order as the indic_features array. |
| */ |
| enum { |
| _NUKT, |
| _AKHN, |
| RPHF, |
| _RKRF, |
| PREF, |
| BLWF, |
| HALF, |
| ABVF, |
| PSTF, |
| CFAR, |
| _VATU, |
| _CJCT, |
| |
| INIT, |
| _PRES, |
| _ABVS, |
| _BLWS, |
| _PSTS, |
| _HALN, |
| _DIST, |
| _ABVM, |
| _BLWM, |
| |
| INDIC_NUM_FEATURES, |
| INDIC_BASIC_FEATURES = INIT /* Don't forget to update this! */ |
| }; |
| |
| static void |
| setup_syllables (const hb_ot_shape_plan_t *plan, |
| hb_font_t *font, |
| hb_buffer_t *buffer); |
| static void |
| initial_reordering (const hb_ot_shape_plan_t *plan, |
| hb_font_t *font, |
| hb_buffer_t *buffer); |
| static void |
| final_reordering (const hb_ot_shape_plan_t *plan, |
| hb_font_t *font, |
| hb_buffer_t *buffer); |
| |
| static void |
| collect_features_indic (hb_ot_shape_planner_t *plan) |
| { |
| hb_ot_map_builder_t *map = &plan->map; |
| |
| /* Do this before any lookups have been applied. */ |
| map->add_gsub_pause (setup_syllables); |
| |
| map->add_global_bool_feature (HB_TAG('l','o','c','l')); |
| /* The Indic specs do not require ccmp, but we apply it here since if |
| * there is a use of it, it's typically at the beginning. */ |
| map->add_global_bool_feature (HB_TAG('c','c','m','p')); |
| |
| |
| unsigned int i = 0; |
| map->add_gsub_pause (initial_reordering); |
| for (; i < INDIC_BASIC_FEATURES; i++) { |
| map->add_feature (indic_features[i].tag, 1, indic_features[i].flags); |
| map->add_gsub_pause (NULL); |
| } |
| map->add_gsub_pause (final_reordering); |
| for (; i < INDIC_NUM_FEATURES; i++) { |
| map->add_feature (indic_features[i].tag, 1, indic_features[i].flags); |
| } |
| } |
| |
| static void |
| override_features_indic (hb_ot_shape_planner_t *plan) |
| { |
| /* Uniscribe does not apply 'kern'. */ |
| if (hb_options ().uniscribe_bug_compatible) |
| plan->map.add_feature (HB_TAG('k','e','r','n'), 0, F_GLOBAL); |
| |
| plan->map.add_feature (HB_TAG('l','i','g','a'), 0, F_GLOBAL); |
| } |
| |
| |
| struct would_substitute_feature_t |
| { |
| inline void init (const hb_ot_map_t *map, hb_tag_t feature_tag) |
| { |
| map->get_stage_lookups (0/*GSUB*/, |
| map->get_feature_stage (0/*GSUB*/, feature_tag), |
| &lookups, &count); |
| } |
| |
| inline bool would_substitute (hb_codepoint_t *glyphs, |
| unsigned int glyphs_count, |
| bool zero_context, |
| hb_face_t *face) const |
| { |
| for (unsigned int i = 0; i < count; i++) |
| if (hb_ot_layout_lookup_would_substitute_fast (face, lookups[i].index, glyphs, glyphs_count, zero_context)) |
| return true; |
| return false; |
| } |
| |
| private: |
| const hb_ot_map_t::lookup_map_t *lookups; |
| unsigned int count; |
| }; |
| |
| struct indic_shape_plan_t |
| { |
| ASSERT_POD (); |
| |
| inline bool get_virama_glyph (hb_font_t *font, hb_codepoint_t *pglyph) const |
| { |
| hb_codepoint_t glyph = virama_glyph; |
| if (unlikely (virama_glyph == (hb_codepoint_t) -1)) |
| { |
| if (!config->virama || !font->get_glyph (config->virama, 0, &glyph)) |
| glyph = 0; |
| /* Technically speaking, the spec says we should apply 'locl' to virama too. |
| * Maybe one day... */ |
| |
| /* Our get_glyph() function needs a font, so we can't get the virama glyph |
| * during shape planning... Instead, overwrite it here. It's safe. Don't worry! */ |
| (const_cast<indic_shape_plan_t *> (this))->virama_glyph = glyph; |
| } |
| |
| *pglyph = glyph; |
| return glyph != 0; |
| } |
| |
| const indic_config_t *config; |
| |
| bool is_old_spec; |
| hb_codepoint_t virama_glyph; |
| |
| would_substitute_feature_t rphf; |
| would_substitute_feature_t pref; |
| would_substitute_feature_t blwf; |
| would_substitute_feature_t pstf; |
| |
| hb_mask_t mask_array[INDIC_NUM_FEATURES]; |
| }; |
| |
| static void * |
| data_create_indic (const hb_ot_shape_plan_t *plan) |
| { |
| indic_shape_plan_t *indic_plan = (indic_shape_plan_t *) calloc (1, sizeof (indic_shape_plan_t)); |
| if (unlikely (!indic_plan)) |
| return NULL; |
| |
| indic_plan->config = &indic_configs[0]; |
| for (unsigned int i = 1; i < ARRAY_LENGTH (indic_configs); i++) |
| if (plan->props.script == indic_configs[i].script) { |
| indic_plan->config = &indic_configs[i]; |
| break; |
| } |
| |
| indic_plan->is_old_spec = indic_plan->config->has_old_spec && ((plan->map.chosen_script[0] & 0x000000FF) != '2'); |
| indic_plan->virama_glyph = (hb_codepoint_t) -1; |
| |
| indic_plan->rphf.init (&plan->map, HB_TAG('r','p','h','f')); |
| indic_plan->pref.init (&plan->map, HB_TAG('p','r','e','f')); |
| indic_plan->blwf.init (&plan->map, HB_TAG('b','l','w','f')); |
| indic_plan->pstf.init (&plan->map, HB_TAG('p','s','t','f')); |
| |
| for (unsigned int i = 0; i < ARRAY_LENGTH (indic_plan->mask_array); i++) |
| indic_plan->mask_array[i] = (indic_features[i].flags & F_GLOBAL) ? |
| 0 : plan->map.get_1_mask (indic_features[i].tag); |
| |
| return indic_plan; |
| } |
| |
| static void |
| data_destroy_indic (void *data) |
| { |
| free (data); |
| } |
| |
| static indic_position_t |
| consonant_position_from_face (const indic_shape_plan_t *indic_plan, |
| hb_codepoint_t *glyphs, unsigned int glyphs_len, |
| hb_face_t *face) |
| { |
| bool zero_context = indic_plan->is_old_spec ? false : true; |
| if (indic_plan->pref.would_substitute (glyphs, glyphs_len, zero_context, face)) return POS_POST_C; |
| if (indic_plan->blwf.would_substitute (glyphs, glyphs_len, zero_context, face)) return POS_BELOW_C; |
| if (indic_plan->pstf.would_substitute (glyphs, glyphs_len, zero_context, face)) return POS_POST_C; |
| return POS_BASE_C; |
| } |
| |
| |
| enum syllable_type_t { |
| consonant_syllable, |
| vowel_syllable, |
| standalone_cluster, |
| broken_cluster, |
| non_indic_cluster, |
| }; |
| |
| #include "hb-ot-shape-complex-indic-machine.hh" |
| |
| |
| static void |
| setup_masks_indic (const hb_ot_shape_plan_t *plan HB_UNUSED, |
| hb_buffer_t *buffer, |
| hb_font_t *font HB_UNUSED) |
| { |
| HB_BUFFER_ALLOCATE_VAR (buffer, indic_category); |
| HB_BUFFER_ALLOCATE_VAR (buffer, indic_position); |
| |
| /* We cannot setup masks here. We save information about characters |
| * and setup masks later on in a pause-callback. */ |
| |
| unsigned int count = buffer->len; |
| for (unsigned int i = 0; i < count; i++) |
| set_indic_properties (buffer->info[i]); |
| } |
| |
| static void |
| setup_syllables (const hb_ot_shape_plan_t *plan HB_UNUSED, |
| hb_font_t *font HB_UNUSED, |
| hb_buffer_t *buffer) |
| { |
| find_syllables (buffer); |
| } |
| |
| static int |
| compare_indic_order (const hb_glyph_info_t *pa, const hb_glyph_info_t *pb) |
| { |
| int a = pa->indic_position(); |
| int b = pb->indic_position(); |
| |
| return a < b ? -1 : a == b ? 0 : +1; |
| } |
| |
| |
| |
| static void |
| update_consonant_positions (const hb_ot_shape_plan_t *plan, |
| hb_font_t *font, |
| hb_buffer_t *buffer) |
| { |
| const indic_shape_plan_t *indic_plan = (const indic_shape_plan_t *) plan->data; |
| |
| unsigned int consonant_pos = indic_plan->is_old_spec ? 0 : 1; |
| hb_codepoint_t glyphs[2]; |
| if (indic_plan->get_virama_glyph (font, &glyphs[1 - consonant_pos])) |
| { |
| hb_face_t *face = font->face; |
| unsigned int count = buffer->len; |
| for (unsigned int i = 0; i < count; i++) |
| if (buffer->info[i].indic_position() == POS_BASE_C) { |
| glyphs[consonant_pos] = buffer->info[i].codepoint; |
| buffer->info[i].indic_position() = consonant_position_from_face (indic_plan, glyphs, 2, face); |
| } |
| } |
| } |
| |
| |
| /* Rules from: |
| * https://www.microsoft.com/typography/otfntdev/devanot/shaping.aspx */ |
| |
| static void |
| initial_reordering_consonant_syllable (const hb_ot_shape_plan_t *plan, |
| hb_face_t *face, |
| hb_buffer_t *buffer, |
| unsigned int start, unsigned int end) |
| { |
| const indic_shape_plan_t *indic_plan = (const indic_shape_plan_t *) plan->data; |
| hb_glyph_info_t *info = buffer->info; |
| |
| |
| /* 1. Find base consonant: |
| * |
| * The shaping engine finds the base consonant of the syllable, using the |
| * following algorithm: starting from the end of the syllable, move backwards |
| * until a consonant is found that does not have a below-base or post-base |
| * form (post-base forms have to follow below-base forms), or that is not a |
| * pre-base reordering Ra, or arrive at the first consonant. The consonant |
| * stopped at will be the base. |
| * |
| * o If the syllable starts with Ra + Halant (in a script that has Reph) |
| * and has more than one consonant, Ra is excluded from candidates for |
| * base consonants. |
| */ |
| |
| unsigned int base = end; |
| bool has_reph = false; |
| |
| { |
| /* -> If the syllable starts with Ra + Halant (in a script that has Reph) |
| * and has more than one consonant, Ra is excluded from candidates for |
| * base consonants. */ |
| unsigned int limit = start; |
| if (indic_plan->mask_array[RPHF] && |
| start + 3 <= end && |
| ( |
| (indic_plan->config->reph_mode == REPH_MODE_IMPLICIT && !is_joiner (info[start + 2])) || |
| (indic_plan->config->reph_mode == REPH_MODE_EXPLICIT && info[start + 2].indic_category() == OT_ZWJ) |
| )) |
| { |
| /* See if it matches the 'rphf' feature. */ |
| hb_codepoint_t glyphs[2] = {info[start].codepoint, info[start + 1].codepoint}; |
| if (indic_plan->rphf.would_substitute (glyphs, ARRAY_LENGTH (glyphs), true, face)) |
| { |
| limit += 2; |
| while (limit < end && is_joiner (info[limit])) |
| limit++; |
| base = start; |
| has_reph = true; |
| } |
| } else if (indic_plan->config->reph_mode == REPH_MODE_LOG_REPHA && info[start].indic_category() == OT_Repha) |
| { |
| limit += 1; |
| while (limit < end && is_joiner (info[limit])) |
| limit++; |
| base = start; |
| has_reph = true; |
| } |
| |
| switch (indic_plan->config->base_pos) |
| { |
| default: |
| assert (false); |
| /* fallthrough */ |
| |
| case BASE_POS_LAST: |
| { |
| /* -> starting from the end of the syllable, move backwards */ |
| unsigned int i = end; |
| bool seen_below = false; |
| do { |
| i--; |
| /* -> until a consonant is found */ |
| if (is_consonant (info[i])) |
| { |
| /* -> that does not have a below-base or post-base form |
| * (post-base forms have to follow below-base forms), */ |
| if (info[i].indic_position() != POS_BELOW_C && |
| (info[i].indic_position() != POS_POST_C || seen_below)) |
| { |
| base = i; |
| break; |
| } |
| if (info[i].indic_position() == POS_BELOW_C) |
| seen_below = true; |
| |
| /* -> or that is not a pre-base reordering Ra, |
| * |
| * IMPLEMENTATION NOTES: |
| * |
| * Our pre-base reordering Ra's are marked POS_BELOW, so will be skipped |
| * by the logic above already. |
| */ |
| |
| /* -> or arrive at the first consonant. The consonant stopped at will |
| * be the base. */ |
| base = i; |
| } |
| else |
| { |
| /* A ZWJ after a Halant stops the base search, and requests an explicit |
| * half form. |
| * A ZWJ before a Halant, requests a subjoined form instead, and hence |
| * search continues. This is particularly important for Bengali |
| * sequence Ra,H,Ya that should form Ya-Phalaa by subjoining Ya. */ |
| if (start < i && |
| info[i].indic_category() == OT_ZWJ && |
| info[i - 1].indic_category() == OT_H) |
| break; |
| } |
| } while (i > limit); |
| } |
| break; |
| |
| case BASE_POS_FIRST: |
| { |
| /* In scripts without half forms (eg. Khmer), the first consonant is always the base. */ |
| |
| if (!has_reph) |
| base = limit; |
| |
| /* Find the last base consonant that is not blocked by ZWJ. If there is |
| * a ZWJ right before a base consonant, that would request a subjoined form. */ |
| for (unsigned int i = limit; i < end; i++) |
| if (is_consonant (info[i]) && info[i].indic_position() == POS_BASE_C) |
| { |
| if (limit < i && info[i - 1].indic_category() == OT_ZWJ) |
| break; |
| else |
| base = i; |
| } |
| |
| /* Mark all subsequent consonants as below. */ |
| for (unsigned int i = base + 1; i < end; i++) |
| if (is_consonant (info[i]) && info[i].indic_position() == POS_BASE_C) |
| info[i].indic_position() = POS_BELOW_C; |
| } |
| break; |
| } |
| |
| /* -> If the syllable starts with Ra + Halant (in a script that has Reph) |
| * and has more than one consonant, Ra is excluded from candidates for |
| * base consonants. |
| * |
| * Only do this for unforced Reph. (ie. not for Ra,H,ZWJ. */ |
| if (has_reph && base == start && limit - base <= 2) { |
| /* Have no other consonant, so Reph is not formed and Ra becomes base. */ |
| has_reph = false; |
| } |
| } |
| |
| |
| /* 2. Decompose and reorder Matras: |
| * |
| * Each matra and any syllable modifier sign in the cluster are moved to the |
| * appropriate position relative to the consonant(s) in the cluster. The |
| * shaping engine decomposes two- or three-part matras into their constituent |
| * parts before any repositioning. Matra characters are classified by which |
| * consonant in a conjunct they have affinity for and are reordered to the |
| * following positions: |
| * |
| * o Before first half form in the syllable |
| * o After subjoined consonants |
| * o After post-form consonant |
| * o After main consonant (for above marks) |
| * |
| * IMPLEMENTATION NOTES: |
| * |
| * The normalize() routine has already decomposed matras for us, so we don't |
| * need to worry about that. |
| */ |
| |
| |
| /* 3. Reorder marks to canonical order: |
| * |
| * Adjacent nukta and halant or nukta and vedic sign are always repositioned |
| * if necessary, so that the nukta is first. |
| * |
| * IMPLEMENTATION NOTES: |
| * |
| * We don't need to do this: the normalize() routine already did this for us. |
| */ |
| |
| |
| /* Reorder characters */ |
| |
| for (unsigned int i = start; i < base; i++) |
| info[i].indic_position() = MIN (POS_PRE_C, (indic_position_t) info[i].indic_position()); |
| |
| if (base < end) |
| info[base].indic_position() = POS_BASE_C; |
| |
| /* Mark final consonants. A final consonant is one appearing after a matra, |
| * like in Khmer. */ |
| for (unsigned int i = base + 1; i < end; i++) |
| if (info[i].indic_category() == OT_M) { |
| for (unsigned int j = i + 1; j < end; j++) |
| if (is_consonant (info[j])) { |
| info[j].indic_position() = POS_FINAL_C; |
| break; |
| } |
| break; |
| } |
| |
| /* Handle beginning Ra */ |
| if (has_reph) |
| info[start].indic_position() = POS_RA_TO_BECOME_REPH; |
| |
| /* For old-style Indic script tags, move the first post-base Halant after |
| * last consonant. Only do this if there is *not* a Halant after last |
| * consonant. Otherwise it becomes messy. */ |
| if (indic_plan->is_old_spec) { |
| for (unsigned int i = base + 1; i < end; i++) |
| if (info[i].indic_category() == OT_H) { |
| unsigned int j; |
| for (j = end - 1; j > i; j--) |
| if (is_consonant (info[j]) || info[j].indic_category() == OT_H) |
| break; |
| if (info[j].indic_category() != OT_H && j > i) { |
| /* Move Halant to after last consonant. */ |
| hb_glyph_info_t t = info[i]; |
| memmove (&info[i], &info[i + 1], (j - i) * sizeof (info[0])); |
| info[j] = t; |
| } |
| break; |
| } |
| } |
| |
| /* Attach misc marks to previous char to move with them. */ |
| { |
| indic_position_t last_pos = POS_START; |
| for (unsigned int i = start; i < end; i++) |
| { |
| if ((FLAG (info[i].indic_category()) & (JOINER_FLAGS | FLAG (OT_N) | FLAG (OT_RS) | HALANT_OR_COENG_FLAGS))) |
| { |
| info[i].indic_position() = last_pos; |
| if (unlikely (info[i].indic_category() == OT_H && |
| info[i].indic_position() == POS_PRE_M)) |
| { |
| /* |
| * Uniscribe doesn't move the Halant with Left Matra. |
| * TEST: U+092B,U+093F,U+094DE |
| * We follow. This is important for the Sinhala |
| * U+0DDA split matra since it decomposes to U+0DD9,U+0DCA |
| * where U+0DD9 is a left matra and U+0DCA is the virama. |
| * We don't want to move the virama with the left matra. |
| * TEST: U+0D9A,U+0DDA |
| */ |
| for (unsigned int j = i; j > start; j--) |
| if (info[j - 1].indic_position() != POS_PRE_M) { |
| info[i].indic_position() = info[j - 1].indic_position(); |
| break; |
| } |
| } |
| } else if (info[i].indic_position() != POS_SMVD) { |
| last_pos = (indic_position_t) info[i].indic_position(); |
| } |
| } |
| } |
| /* Re-attach ZWJ, ZWNJ, and halant to next char, for after-base consonants. */ |
| { |
| unsigned int last_halant = end; |
| for (unsigned int i = base + 1; i < end; i++) |
| if (is_halant_or_coeng (info[i])) |
| last_halant = i; |
| else if (is_consonant (info[i])) { |
| for (unsigned int j = last_halant; j < i; j++) |
| if (info[j].indic_position() != POS_SMVD) |
| info[j].indic_position() = info[i].indic_position(); |
| } |
| } |
| |
| { |
| /* Things are out-of-control for post base positions, they may shuffle |
| * around like crazy, so merge clusters. For pre-base stuff, we handle |
| * cluster issues in final reordering. */ |
| buffer->merge_clusters (base, end); |
| /* Sit tight, rock 'n roll! */ |
| hb_bubble_sort (info + start, end - start, compare_indic_order); |
| /* Find base again */ |
| base = end; |
| for (unsigned int i = start; i < end; i++) |
| if (info[i].indic_position() == POS_BASE_C) { |
| base = i; |
| break; |
| } |
| } |
| |
| /* Setup masks now */ |
| |
| { |
| hb_mask_t mask; |
| |
| /* Reph */ |
| for (unsigned int i = start; i < end && info[i].indic_position() == POS_RA_TO_BECOME_REPH; i++) |
| info[i].mask |= indic_plan->mask_array[RPHF]; |
| |
| /* Pre-base */ |
| mask = indic_plan->mask_array[HALF]; |
| for (unsigned int i = start; i < base; i++) |
| info[i].mask |= mask; |
| /* Base */ |
| mask = 0; |
| if (base < end) |
| info[base].mask |= mask; |
| /* Post-base */ |
| mask = indic_plan->mask_array[BLWF] | indic_plan->mask_array[ABVF] | indic_plan->mask_array[PSTF]; |
| for (unsigned int i = base + 1; i < end; i++) |
| info[i].mask |= mask; |
| } |
| |
| if (indic_plan->is_old_spec && |
| buffer->props.script == HB_SCRIPT_DEVANAGARI) |
| { |
| /* Old-spec eye-lash Ra needs special handling. From the |
| * spec: |
| * |
| * "The feature 'below-base form' is applied to consonants |
| * having below-base forms and following the base consonant. |
| * The exception is vattu, which may appear below half forms |
| * as well as below the base glyph. The feature 'below-base |
| * form' will be applied to all such occurrences of Ra as well." |
| * |
| * Test case: U+0924,U+094D,U+0930,U+094d,U+0915 |
| * with Sanskrit 2003 font. |
| * |
| * However, note that Ra,Halant,ZWJ is the correct way to |
| * request eyelash form of Ra, so we wouldbn't inhibit it |
| * in that sequence. |
| * |
| * Test case: U+0924,U+094D,U+0930,U+094d,U+200D,U+0915 |
| */ |
| for (unsigned int i = start; i + 1 < base; i++) |
| if (info[i ].indic_category() == OT_Ra && |
| info[i+1].indic_category() == OT_H && |
| (i + 2 == base || |
| info[i+2].indic_category() != OT_ZWJ)) |
| { |
| info[i ].mask |= indic_plan->mask_array[BLWF]; |
| info[i+1].mask |= indic_plan->mask_array[BLWF]; |
| } |
| } |
| |
| if (indic_plan->mask_array[PREF] && base + 2 < end) |
| { |
| /* Find a Halant,Ra sequence and mark it for pre-base reordering processing. */ |
| for (unsigned int i = base + 1; i + 1 < end; i++) { |
| hb_codepoint_t glyphs[2] = {info[i].codepoint, info[i + 1].codepoint}; |
| if (indic_plan->pref.would_substitute (glyphs, ARRAY_LENGTH (glyphs), true, face)) |
| { |
| info[i++].mask |= indic_plan->mask_array[PREF]; |
| info[i++].mask |= indic_plan->mask_array[PREF]; |
| |
| /* Mark the subsequent stuff with 'cfar'. Used in Khmer. |
| * Read the feature spec. |
| * This allows distinguishing the following cases with MS Khmer fonts: |
| * U+1784,U+17D2,U+179A,U+17D2,U+1782 |
| * U+1784,U+17D2,U+1782,U+17D2,U+179A |
| */ |
| for (; i < end; i++) |
| info[i].mask |= indic_plan->mask_array[CFAR]; |
| |
| break; |
| } |
| } |
| } |
| |
| /* Apply ZWJ/ZWNJ effects */ |
| for (unsigned int i = start + 1; i < end; i++) |
| if (is_joiner (info[i])) { |
| bool non_joiner = info[i].indic_category() == OT_ZWNJ; |
| unsigned int j = i; |
| |
| do { |
| j--; |
| |
| /* ZWJ/ZWNJ should disable CJCT. They do that by simply |
| * being there, since we don't skip them for the CJCT |
| * feature (ie. F_MANUAL_JOINERS) */ |
| |
| /* A ZWNJ disables HALF. */ |
| if (non_joiner) |
| info[j].mask &= ~indic_plan->mask_array[HALF]; |
| |
| } while (j > start && !is_consonant (info[j])); |
| } |
| } |
| |
| |
| static void |
| initial_reordering_vowel_syllable (const hb_ot_shape_plan_t *plan, |
| hb_face_t *face, |
| hb_buffer_t *buffer, |
| unsigned int start, unsigned int end) |
| { |
| /* We made the vowels look like consonants. So let's call the consonant logic! */ |
| initial_reordering_consonant_syllable (plan, face, buffer, start, end); |
| } |
| |
| static void |
| initial_reordering_standalone_cluster (const hb_ot_shape_plan_t *plan, |
| hb_face_t *face, |
| hb_buffer_t *buffer, |
| unsigned int start, unsigned int end) |
| { |
| /* We treat NBSP/dotted-circle as if they are consonants, so we should just chain. |
| * Only if not in compatibility mode that is... */ |
| |
| if (hb_options ().uniscribe_bug_compatible) |
| { |
| /* For dotted-circle, this is what Uniscribe does: |
| * If dotted-circle is the last glyph, it just does nothing. |
| * Ie. It doesn't form Reph. */ |
| if (buffer->info[end - 1].indic_category() == OT_DOTTEDCIRCLE) |
| return; |
| } |
| |
| initial_reordering_consonant_syllable (plan, face, buffer, start, end); |
| } |
| |
| static void |
| initial_reordering_broken_cluster (const hb_ot_shape_plan_t *plan, |
| hb_face_t *face, |
| hb_buffer_t *buffer, |
| unsigned int start, unsigned int end) |
| { |
| /* We already inserted dotted-circles, so just call the standalone_cluster. */ |
| initial_reordering_standalone_cluster (plan, face, buffer, start, end); |
| } |
| |
| static void |
| initial_reordering_non_indic_cluster (const hb_ot_shape_plan_t *plan HB_UNUSED, |
| hb_face_t *face HB_UNUSED, |
| hb_buffer_t *buffer HB_UNUSED, |
| unsigned int start HB_UNUSED, unsigned int end HB_UNUSED) |
| { |
| /* Nothing to do right now. If we ever switch to using the output |
| * buffer in the reordering process, we'd need to next_glyph() here. */ |
| } |
| |
| |
| static void |
| initial_reordering_syllable (const hb_ot_shape_plan_t *plan, |
| hb_face_t *face, |
| hb_buffer_t *buffer, |
| unsigned int start, unsigned int end) |
| { |
| syllable_type_t syllable_type = (syllable_type_t) (buffer->info[start].syllable() & 0x0F); |
| switch (syllable_type) { |
| case consonant_syllable: initial_reordering_consonant_syllable (plan, face, buffer, start, end); return; |
| case vowel_syllable: initial_reordering_vowel_syllable (plan, face, buffer, start, end); return; |
| case standalone_cluster: initial_reordering_standalone_cluster (plan, face, buffer, start, end); return; |
| case broken_cluster: initial_reordering_broken_cluster (plan, face, buffer, start, end); return; |
| case non_indic_cluster: initial_reordering_non_indic_cluster (plan, face, buffer, start, end); return; |
| } |
| } |
| |
| static inline void |
| insert_dotted_circles (const hb_ot_shape_plan_t *plan HB_UNUSED, |
| hb_font_t *font, |
| hb_buffer_t *buffer) |
| { |
| /* Note: This loop is extra overhead, but should not be measurable. */ |
| bool has_broken_syllables = false; |
| unsigned int count = buffer->len; |
| for (unsigned int i = 0; i < count; i++) |
| if ((buffer->info[i].syllable() & 0x0F) == broken_cluster) { |
| has_broken_syllables = true; |
| break; |
| } |
| if (likely (!has_broken_syllables)) |
| return; |
| |
| |
| hb_codepoint_t dottedcircle_glyph; |
| if (!font->get_glyph (0x25CC, 0, &dottedcircle_glyph)) |
| return; |
| |
| hb_glyph_info_t dottedcircle = {0}; |
| dottedcircle.codepoint = 0x25CC; |
| set_indic_properties (dottedcircle); |
| dottedcircle.codepoint = dottedcircle_glyph; |
| |
| buffer->clear_output (); |
| |
| buffer->idx = 0; |
| unsigned int last_syllable = 0; |
| while (buffer->idx < buffer->len) |
| { |
| unsigned int syllable = buffer->cur().syllable(); |
| syllable_type_t syllable_type = (syllable_type_t) (syllable & 0x0F); |
| if (unlikely (last_syllable != syllable && syllable_type == broken_cluster)) |
| { |
| last_syllable = syllable; |
| |
| hb_glyph_info_t info = dottedcircle; |
| info.cluster = buffer->cur().cluster; |
| info.mask = buffer->cur().mask; |
| info.syllable() = buffer->cur().syllable(); |
| |
| /* Insert dottedcircle after possible Repha. */ |
| while (buffer->idx < buffer->len && |
| last_syllable == buffer->cur().syllable() && |
| buffer->cur().indic_category() == OT_Repha) |
| buffer->next_glyph (); |
| |
| buffer->output_info (info); |
| } |
| else |
| buffer->next_glyph (); |
| } |
| |
| buffer->swap_buffers (); |
| } |
| |
| static void |
| initial_reordering (const hb_ot_shape_plan_t *plan, |
| hb_font_t *font, |
| hb_buffer_t *buffer) |
| { |
| update_consonant_positions (plan, font, buffer); |
| insert_dotted_circles (plan, font, buffer); |
| |
| hb_glyph_info_t *info = buffer->info; |
| unsigned int count = buffer->len; |
| if (unlikely (!count)) return; |
| unsigned int last = 0; |
| unsigned int last_syllable = info[0].syllable(); |
| for (unsigned int i = 1; i < count; i++) |
| if (last_syllable != info[i].syllable()) { |
| initial_reordering_syllable (plan, font->face, buffer, last, i); |
| last = i; |
| last_syllable = info[last].syllable(); |
| } |
| initial_reordering_syllable (plan, font->face, buffer, last, count); |
| } |
| |
| static void |
| final_reordering_syllable (const hb_ot_shape_plan_t *plan, |
| hb_buffer_t *buffer, |
| unsigned int start, unsigned int end) |
| { |
| const indic_shape_plan_t *indic_plan = (const indic_shape_plan_t *) plan->data; |
| hb_glyph_info_t *info = buffer->info; |
| |
| /* 4. Final reordering: |
| * |
| * After the localized forms and basic shaping forms GSUB features have been |
| * applied (see below), the shaping engine performs some final glyph |
| * reordering before applying all the remaining font features to the entire |
| * cluster. |
| */ |
| |
| /* Find base again */ |
| unsigned int base; |
| for (base = start; base < end; base++) |
| if (info[base].indic_position() >= POS_BASE_C) { |
| if (start < base && info[base].indic_position() > POS_BASE_C) |
| base--; |
| break; |
| } |
| if (base == end && start < base && |
| info[base - 1].indic_category() != OT_ZWJ) |
| base--; |
| while (start < base && |
| (info[base].indic_category() == OT_H || |
| info[base].indic_category() == OT_N)) |
| base--; |
| |
| |
| /* o Reorder matras: |
| * |
| * If a pre-base matra character had been reordered before applying basic |
| * features, the glyph can be moved closer to the main consonant based on |
| * whether half-forms had been formed. Actual position for the matra is |
| * defined as “after last standalone halant glyph, after initial matra |
| * position and before the main consonant”. If ZWJ or ZWNJ follow this |
| * halant, position is moved after it. |
| */ |
| |
| if (start + 1 < end && start < base) /* Otherwise there can't be any pre-base matra characters. */ |
| { |
| /* If we lost track of base, alas, position before last thingy. */ |
| unsigned int new_pos = base == end ? base - 2 : base - 1; |
| |
| /* Malayalam / Tamil do not have "half" forms or explicit virama forms. |
| * The glyphs formed by 'half' are Chillus or ligated explicit viramas. |
| * We want to position matra after them. |
| */ |
| if (buffer->props.script != HB_SCRIPT_MALAYALAM && buffer->props.script != HB_SCRIPT_TAMIL) |
| { |
| while (new_pos > start && |
| !(is_one_of (info[new_pos], (FLAG (OT_M) | FLAG (OT_H) | FLAG (OT_Coeng))))) |
| new_pos--; |
| |
| /* If we found no Halant we are done. |
| * Otherwise only proceed if the Halant does |
| * not belong to the Matra itself! */ |
| if (is_halant_or_coeng (info[new_pos]) && |
| info[new_pos].indic_position() != POS_PRE_M) |
| { |
| /* -> If ZWJ or ZWNJ follow this halant, position is moved after it. */ |
| if (new_pos + 1 < end && is_joiner (info[new_pos + 1])) |
| new_pos++; |
| } |
| else |
| new_pos = start; /* No move. */ |
| } |
| |
| if (start < new_pos && info[new_pos].indic_position () != POS_PRE_M) |
| { |
| /* Now go see if there's actually any matras... */ |
| for (unsigned int i = new_pos; i > start; i--) |
| if (info[i - 1].indic_position () == POS_PRE_M) |
| { |
| unsigned int old_pos = i - 1; |
| hb_glyph_info_t tmp = info[old_pos]; |
| memmove (&info[old_pos], &info[old_pos + 1], (new_pos - old_pos) * sizeof (info[0])); |
| info[new_pos] = tmp; |
| if (old_pos < base && base <= new_pos) /* Shouldn't actually happen. */ |
| base--; |
| new_pos--; |
| } |
| buffer->merge_clusters (new_pos, MIN (end, base + 1)); |
| } else { |
| for (unsigned int i = start; i < base; i++) |
| if (info[i].indic_position () == POS_PRE_M) { |
| buffer->merge_clusters (i, MIN (end, base + 1)); |
| break; |
| } |
| } |
| } |
| |
| |
| /* o Reorder reph: |
| * |
| * Reph’s original position is always at the beginning of the syllable, |
| * (i.e. it is not reordered at the character reordering stage). However, |
| * it will be reordered according to the basic-forms shaping results. |
| * Possible positions for reph, depending on the script, are; after main, |
| * before post-base consonant forms, and after post-base consonant forms. |
| */ |
| |
| /* If there's anything after the Ra that has the REPH pos, it ought to be halant. |
| * Which means that the font has failed to ligate the Reph. In which case, we |
| * shouldn't move. */ |
| if (start + 1 < end && |
| info[start].indic_position() == POS_RA_TO_BECOME_REPH && |
| info[start + 1].indic_position() != POS_RA_TO_BECOME_REPH) |
| { |
| unsigned int new_reph_pos; |
| reph_position_t reph_pos = indic_plan->config->reph_pos; |
| |
| /* XXX Figure out old behavior too */ |
| |
| /* 1. If reph should be positioned after post-base consonant forms, |
| * proceed to step 5. |
| */ |
| if (reph_pos == REPH_POS_AFTER_POST) |
| { |
| goto reph_step_5; |
| } |
| |
| /* 2. If the reph repositioning class is not after post-base: target |
| * position is after the first explicit halant glyph between the |
| * first post-reph consonant and last main consonant. If ZWJ or ZWNJ |
| * are following this halant, position is moved after it. If such |
| * position is found, this is the target position. Otherwise, |
| * proceed to the next step. |
| * |
| * Note: in old-implementation fonts, where classifications were |
| * fixed in shaping engine, there was no case where reph position |
| * will be found on this step. |
| */ |
| { |
| new_reph_pos = start + 1; |
| while (new_reph_pos < base && !is_halant_or_coeng (info[new_reph_pos])) |
| new_reph_pos++; |
| |
| if (new_reph_pos < base && is_halant_or_coeng (info[new_reph_pos])) |
| { |
| /* ->If ZWJ or ZWNJ are following this halant, position is moved after it. */ |
| if (new_reph_pos + 1 < base && is_joiner (info[new_reph_pos + 1])) |
| new_reph_pos++; |
| goto reph_move; |
| } |
| } |
| |
| /* 3. If reph should be repositioned after the main consonant: find the |
| * first consonant not ligated with main, or find the first |
| * consonant that is not a potential pre-base reordering Ra. |
| */ |
| if (reph_pos == REPH_POS_AFTER_MAIN) |
| { |
| new_reph_pos = base; |
| /* XXX Skip potential pre-base reordering Ra. */ |
| while (new_reph_pos + 1 < end && info[new_reph_pos + 1].indic_position() <= POS_AFTER_MAIN) |
| new_reph_pos++; |
| if (new_reph_pos < end) |
| goto reph_move; |
| } |
| |
| /* 4. If reph should be positioned before post-base consonant, find |
| * first post-base classified consonant not ligated with main. If no |
| * consonant is found, the target position should be before the |
| * first matra, syllable modifier sign or vedic sign. |
| */ |
| /* This is our take on what step 4 is trying to say (and failing, BADLY). */ |
| if (reph_pos == REPH_POS_AFTER_SUB) |
| { |
| new_reph_pos = base; |
| while (new_reph_pos < end && |
| !( FLAG (info[new_reph_pos + 1].indic_position()) & (FLAG (POS_POST_C) | FLAG (POS_AFTER_POST) | FLAG (POS_SMVD)))) |
| new_reph_pos++; |
| if (new_reph_pos < end) |
| goto reph_move; |
| } |
| |
| /* 5. If no consonant is found in steps 3 or 4, move reph to a position |
| * immediately before the first post-base matra, syllable modifier |
| * sign or vedic sign that has a reordering class after the intended |
| * reph position. For example, if the reordering position for reph |
| * is post-main, it will skip above-base matras that also have a |
| * post-main position. |
| */ |
| reph_step_5: |
| { |
| /* Copied from step 2. */ |
| new_reph_pos = start + 1; |
| while (new_reph_pos < base && !is_halant_or_coeng (info[new_reph_pos])) |
| new_reph_pos++; |
| |
| if (new_reph_pos < base && is_halant_or_coeng (info[new_reph_pos])) |
| { |
| /* ->If ZWJ or ZWNJ are following this halant, position is moved after it. */ |
| if (new_reph_pos + 1 < base && is_joiner (info[new_reph_pos + 1])) |
| new_reph_pos++; |
| goto reph_move; |
| } |
| } |
| |
| /* 6. Otherwise, reorder reph to the end of the syllable. |
| */ |
| { |
| new_reph_pos = end - 1; |
| while (new_reph_pos > start && info[new_reph_pos].indic_position() == POS_SMVD) |
| new_reph_pos--; |
| |
| /* |
| * If the Reph is to be ending up after a Matra,Halant sequence, |
| * position it before that Halant so it can interact with the Matra. |
| * However, if it's a plain Consonant,Halant we shouldn't do that. |
| * Uniscribe doesn't do this. |
| * TEST: U+0930,U+094D,U+0915,U+094B,U+094D |
| */ |
| if (!hb_options ().uniscribe_bug_compatible && |
| unlikely (is_halant_or_coeng (info[new_reph_pos]))) { |
| for (unsigned int i = base + 1; i < new_reph_pos; i++) |
| if (info[i].indic_category() == OT_M) { |
| /* Ok, got it. */ |
| new_reph_pos--; |
| } |
| } |
| goto reph_move; |
| } |
| |
| reph_move: |
| { |
| /* Yay, one big cluster! Merge before moving. */ |
| buffer->merge_clusters (start, end); |
| |
| /* Move */ |
| hb_glyph_info_t reph = info[start]; |
| memmove (&info[start], &info[start + 1], (new_reph_pos - start) * sizeof (info[0])); |
| info[new_reph_pos] = reph; |
| if (start < base && base <= new_reph_pos) |
| base--; |
| } |
| } |
| |
| |
| /* o Reorder pre-base reordering consonants: |
| * |
| * If a pre-base reordering consonant is found, reorder it according to |
| * the following rules: |
| */ |
| |
| if (indic_plan->mask_array[PREF] && base + 1 < end) /* Otherwise there can't be any pre-base reordering Ra. */ |
| { |
| for (unsigned int i = base + 1; i < end; i++) |
| if ((info[i].mask & indic_plan->mask_array[PREF]) != 0) |
| { |
| /* 1. Only reorder a glyph produced by substitution during application |
| * of the <pref> feature. (Note that a font may shape a Ra consonant with |
| * the feature generally but block it in certain contexts.) |
| */ |
| if (i + 1 == end || (info[i + 1].mask & indic_plan->mask_array[PREF]) == 0) |
| { |
| /* |
| * 2. Try to find a target position the same way as for pre-base matra. |
| * If it is found, reorder pre-base consonant glyph. |
| * |
| * 3. If position is not found, reorder immediately before main |
| * consonant. |
| */ |
| |
| unsigned int new_pos = base; |
| /* Malayalam / Tamil do not have "half" forms or explicit virama forms. |
| * The glyphs formed by 'half' are Chillus or ligated explicit viramas. |
| * We want to position matra after them. |
| */ |
| if (buffer->props.script != HB_SCRIPT_MALAYALAM && buffer->props.script != HB_SCRIPT_TAMIL) |
| { |
| while (new_pos > start && |
| !(is_one_of (info[new_pos - 1], FLAG(OT_M) | HALANT_OR_COENG_FLAGS))) |
| new_pos--; |
| |
| /* In Khmer coeng model, a V,Ra can go *after* matras. If it goes after a |
| * split matra, it should be reordered to *before* the left part of such matra. */ |
| if (new_pos > start && info[new_pos - 1].indic_category() == OT_M) |
| { |
| unsigned int old_pos = i; |
| for (unsigned int i = base + 1; i < old_pos; i++) |
| if (info[i].indic_category() == OT_M) |
| { |
| new_pos--; |
| break; |
| } |
| } |
| } |
| |
| if (new_pos > start && is_halant_or_coeng (info[new_pos - 1])) |
| { |
| /* -> If ZWJ or ZWNJ follow this halant, position is moved after it. */ |
| if (new_pos < end && is_joiner (info[new_pos])) |
| new_pos++; |
| } |
| |
| { |
| unsigned int old_pos = i; |
| buffer->merge_clusters (new_pos, old_pos + 1); |
| hb_glyph_info_t tmp = info[old_pos]; |
| memmove (&info[new_pos + 1], &info[new_pos], (old_pos - new_pos) * sizeof (info[0])); |
| info[new_pos] = tmp; |
| if (new_pos <= base && base < old_pos) |
| base++; |
| } |
| } |
| |
| break; |
| } |
| } |
| |
| |
| /* Apply 'init' to the Left Matra if it's a word start. */ |
| if (info[start].indic_position () == POS_PRE_M && |
| (!start || |
| !(FLAG (_hb_glyph_info_get_general_category (&info[start - 1])) & |
| FLAG_RANGE (HB_UNICODE_GENERAL_CATEGORY_FORMAT, HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK)))) |
| info[start].mask |= indic_plan->mask_array[INIT]; |
| |
| |
| /* |
| * Finish off the clusters and go home! |
| */ |
| if (hb_options ().uniscribe_bug_compatible) |
| { |
| /* Uniscribe merges the entire cluster. |
| * This means, half forms are submerged into the main consonants cluster. |
| * This is unnecessary, and makes cursor positioning harder, but that's what |
| * Uniscribe does. */ |
| buffer->merge_clusters (start, end); |
| } |
| } |
| |
| |
| static void |
| final_reordering (const hb_ot_shape_plan_t *plan, |
| hb_font_t *font HB_UNUSED, |
| hb_buffer_t *buffer) |
| { |
| unsigned int count = buffer->len; |
| if (unlikely (!count)) return; |
| |
| hb_glyph_info_t *info = buffer->info; |
| unsigned int last = 0; |
| unsigned int last_syllable = info[0].syllable(); |
| for (unsigned int i = 1; i < count; i++) |
| if (last_syllable != info[i].syllable()) { |
| final_reordering_syllable (plan, buffer, last, i); |
| last = i; |
| last_syllable = info[last].syllable(); |
| } |
| final_reordering_syllable (plan, buffer, last, count); |
| |
| /* Zero syllables now... */ |
| for (unsigned int i = 0; i < count; i++) |
| info[i].syllable() = 0; |
| |
| HB_BUFFER_DEALLOCATE_VAR (buffer, indic_category); |
| HB_BUFFER_DEALLOCATE_VAR (buffer, indic_position); |
| } |
| |
| |
| static hb_ot_shape_normalization_mode_t |
| normalization_preference_indic (const hb_segment_properties_t *props HB_UNUSED) |
| { |
| return HB_OT_SHAPE_NORMALIZATION_MODE_COMPOSED_DIACRITICS_NO_SHORT_CIRCUIT; |
| } |
| |
| static bool |
| decompose_indic (const hb_ot_shape_normalize_context_t *c, |
| hb_codepoint_t ab, |
| hb_codepoint_t *a, |
| hb_codepoint_t *b) |
| { |
| switch (ab) |
| { |
| /* Don't decompose these. */ |
| case 0x0931 : return false; |
| case 0x0B94 : return false; |
| |
| |
| /* |
| * Decompose split matras that don't have Unicode decompositions. |
| */ |
| |
| case 0x0F77 : *a = 0x0FB2; *b= 0x0F81; return true; |
| case 0x0F79 : *a = 0x0FB3; *b= 0x0F81; return true; |
| case 0x17BE : *a = 0x17C1; *b= 0x17BE; return true; |
| case 0x17BF : *a = 0x17C1; *b= 0x17BF; return true; |
| case 0x17C0 : *a = 0x17C1; *b= 0x17C0; return true; |
| case 0x17C4 : *a = 0x17C1; *b= 0x17C4; return true; |
| case 0x17C5 : *a = 0x17C1; *b= 0x17C5; return true; |
| case 0x1925 : *a = 0x1920; *b= 0x1923; return true; |
| case 0x1926 : *a = 0x1920; *b= 0x1924; return true; |
| case 0x1B3C : *a = 0x1B42; *b= 0x1B3C; return true; |
| case 0x1112E : *a = 0x11127; *b= 0x11131; return true; |
| case 0x1112F : *a = 0x11127; *b= 0x11132; return true; |
| #if 0 |
| /* This one has no decomposition in Unicode, but needs no decomposition either. */ |
| /* case 0x0AC9 : return false; */ |
| case 0x0B57 : *a = no decomp, -> RIGHT; return true; |
| case 0x1C29 : *a = no decomp, -> LEFT; return true; |
| case 0xA9C0 : *a = no decomp, -> RIGHT; return true; |
| case 0x111BF : *a = no decomp, -> ABOVE; return true; |
| #endif |
| } |
| |
| if ((ab == 0x0DDA || hb_in_range<hb_codepoint_t> (ab, 0x0DDC, 0x0DDE))) |
| { |
| /* |
| * Sinhala split matras... Let the fun begin. |
| * |
| * These four characters have Unicode decompositions. However, Uniscribe |
| * decomposes them "Khmer-style", that is, it uses the character itself to |
| * get the second half. The first half of all four decompositions is always |
| * U+0DD9. |
| * |
| * Now, there are buggy fonts, namely, the widely used lklug.ttf, that are |
| * broken with Uniscribe. But we need to support them. As such, we only |
| * do the Uniscribe-style decomposition if the character is transformed into |
| * its "sec.half" form by the 'pstf' feature. Otherwise, we fall back to |
| * Unicode decomposition. |
| * |
| * Note that we can't unconditionally use Unicode decomposition. That would |
| * break some other fonts, that are designed to work with Uniscribe, and |
| * don't have positioning features for the Unicode-style decomposition. |
| * |
| * Argh... |
| * |
| * The Uniscribe behavior is now documented in the newly published Sinhala |
| * spec in 2012: |
| * |
| * http://www.microsoft.com/typography/OpenTypeDev/sinhala/intro.htm#shaping |
| */ |
| |
| const indic_shape_plan_t *indic_plan = (const indic_shape_plan_t *) c->plan->data; |
| |
| hb_codepoint_t glyph; |
| |
| if (hb_options ().uniscribe_bug_compatible || |
| (c->font->get_glyph (ab, 0, &glyph) && |
| indic_plan->pstf.would_substitute (&glyph, 1, true, c->font->face))) |
| { |
| /* Ok, safe to use Uniscribe-style decomposition. */ |
| *a = 0x0DD9; |
| *b = ab; |
| return true; |
| } |
| } |
| |
| return c->unicode->decompose (ab, a, b); |
| } |
| |
| static bool |
| compose_indic (const hb_ot_shape_normalize_context_t *c, |
| hb_codepoint_t a, |
| hb_codepoint_t b, |
| hb_codepoint_t *ab) |
| { |
| /* Avoid recomposing split matras. */ |
| if (HB_UNICODE_GENERAL_CATEGORY_IS_MARK (c->unicode->general_category (a))) |
| return false; |
| |
| /* Composition-exclusion exceptions that we want to recompose. */ |
| if (a == 0x09AF && b == 0x09BC) { *ab = 0x09DF; return true; } |
| |
| return c->unicode->compose (a, b, ab); |
| } |
| |
| |
| const hb_ot_complex_shaper_t _hb_ot_complex_shaper_indic = |
| { |
| "indic", |
| collect_features_indic, |
| override_features_indic, |
| data_create_indic, |
| data_destroy_indic, |
| NULL, /* preprocess_text */ |
| normalization_preference_indic, |
| decompose_indic, |
| compose_indic, |
| setup_masks_indic, |
| HB_OT_SHAPE_ZERO_WIDTH_MARKS_NONE, |
| false, /* fallback_position */ |
| }; |