config.status

#! /bin/sh
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=${CONFIG_SHELL-/bin/sh}
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in
  *posix*) set -o posix ;;
esac

fi




# PATH needs CR
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
as_nl='
'
IFS=" ""	$as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
case $0 in
  *[\\/]* ) as_myself=$0 ;;
  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS

     ;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
  as_myself=$0
fi
if test ! -f "$as_myself"; then
  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
  { (exit 1); exit 1; }
fi

# Work around bugs in pre-3.0 UWIN ksh.
for as_var in ENV MAIL MAILPATH
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`

# CDPATH.
$as_unset CDPATH



  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line after each line using $LINENO; the second 'sed'
  # does the real work.  The second script uses 'N' to pair each
  # line-number line with the line containing $LINENO, and appends
  # trailing '-' during substitution so that $LINENO is not a special
  # case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # scripts with optimization help from Paolo Bonzini.  Blame Lee
  # E. McMahon (1931-1989) for sed's syntax.  :-)
  sed -n '
    p
    /[$]LINENO/=
  ' <$as_myself |
    sed '
      s/[$]LINENO.*/&-/
      t lineno
      b
      :lineno
      N
      :loop
      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
      t loop
      s/-\n.*//
    ' >$as_me.lineno &&
  chmod +x "$as_me.lineno" ||
    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensitive to this).
  . "./$as_me.lineno"
  # Exit status is that of the last command.
  exit
}


if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
  case `echo 'x\c'` in
  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
  *)   ECHO_C='\c';;
  esac;;
*)
  ECHO_N='-n';;
esac

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir
fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  as_ln_s='ln -s'
  # ... but there are two gotchas:
  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
  # In both cases, we have to default to `cp -p'.
  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
    as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

if test -x / >/dev/null 2>&1; then
  as_test_x='test -x'
else
  if ls -dL / >/dev/null 2>&1; then
    as_ls_L_option=L
  else
    as_ls_L_option=
  fi
  as_test_x='
    eval sh -c '\''
      if test -d "$1"; then
        test -d "$1/.";
      else
	case $1 in
        -*)set "./$1";;
	esac;
	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
	???[sx]*):;;*)false;;esac;fi
    '\'' sh
  '
fi
as_executable_p=$as_test_x

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


exec 6>&1

# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by htop $as_me 0.9, which was
generated by GNU Autoconf 2.61.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

on `(hostname || uname -n) 2>/dev/null | sed 1q`
"

# Files that config.status was made for.
config_files=" plpa-1.3.2/Makefile plpa-1.3.2/src/Makefile plpa-1.3.2/src/libplpa/Makefile Makefile htop.1"
config_headers=" config.h plpa-1.3.2/src/libplpa/plpa_config.h plpa-1.3.2/src/libplpa/plpa.h"
config_commands=" depfiles libtool"

ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number and configuration settings, then exit
  -q, --quiet      do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
		   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
		   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Configuration commands:
$config_commands

Report bugs to <bug-autoconf@gnu.org>."

ac_cs_version="\
htop config.status 0.9
configured by ./configure, generated by GNU Autoconf 2.61,
  with options \"\"

Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."

ac_pwd='/home/pundiramit/linaro/smp/htop-0.9'
srcdir='.'
INSTALL='/usr/bin/install -c'
MKDIR_P='/bin/mkdir -p'
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  *)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  esac

  case $ac_option in
  # Handling of the options.
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
    echo "$ac_cs_version"; exit ;;
  --debug | --debu | --deb | --de | --d | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    $ac_shift
    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
    ac_need_defaults=false;;
  --he | --h)
    # Conflict between --help and --header
    { echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; };;
  --help | --hel | -h )
    echo "$ac_cs_usage"; exit ;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) { echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; } ;;

  *) ac_config_targets="$ac_config_targets $1"
     ac_need_defaults=false ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

if $ac_cs_recheck; then
  echo "running CONFIG_SHELL=/bin/sh /bin/sh ./configure " $ac_configure_extra_args " --no-create --no-recursion" >&6
  CONFIG_SHELL=/bin/sh
  export CONFIG_SHELL
  exec /bin/sh "./configure" $ac_configure_extra_args --no-create --no-recursion
fi

exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
  echo "$ac_log"
} >&5

#
# INIT-COMMANDS
#
AMDEP_TRUE="" ac_aux_dir="."


# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
double_quote_subst='s/\(["`\\]\)/\\\1/g'
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
enable_shared='no'
enable_static='yes'
macro_version='2.2.6'
macro_revision='1.3012'
pic_mode='default'
enable_fast_install='needless'
host_alias=''
host='i686-pc-linux-gnu'
host_os='linux-gnu'
build_alias=''
build='i686-pc-linux-gnu'
build_os='linux-gnu'
SED='/bin/sed'
Xsed='/bin/sed -e 1s/^X//'
GREP='/bin/grep'
EGREP='/bin/grep -E'
FGREP='/bin/grep -F'
LD='/usr/bin/ld'
NM='/usr/bin/nm -B'
LN_S='ln -s'
max_cmd_len='1572864'
ac_objext='o'
exeext=''
lt_unset='unset'
lt_SP2NL='tr \040 \012'
lt_NL2SP='tr \015\012 \040\040'
reload_flag=' -r'
reload_cmds='$LD$reload_flag -o $output$reload_objs'
OBJDUMP='objdump'
deplibs_check_method='pass_all'
file_magic_cmd='$MAGIC_CMD'
AR='ar'
AR_FLAGS='cru'
STRIP='strip'
RANLIB='ranlib'
old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $oldlib'
old_postuninstall_cmds=''
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib'
CC='gcc'
CFLAGS='-g -O2'
compiler='gcc'
GCC='yes'
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[	 ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[	 ][	 ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/  {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"lib\2", (void *) \&\2},/p'\'''
objdir='.libs'
SHELL='/bin/sh'
ECHO='echo'
MAGIC_CMD='file'
lt_prog_compiler_no_builtin_flag=' -fno-builtin'
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic=' -fPIC -DPIC'
lt_prog_compiler_static='-static'
lt_cv_prog_compiler_c_o='yes'
need_locks='no'
DSYMUTIL=''
NMEDIT=''
LIPO=''
OTOOL=''
OTOOL64=''
libext='a'
shrext_cmds='.so'
extract_expsyms_cmds=''
archive_cmds_need_lc='yes'
enable_shared_with_static_runtimes='no'
export_dynamic_flag_spec='${wl}--export-dynamic'
whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
compiler_needs_object='no'
old_archive_from_new_cmds=''
old_archive_from_expsyms_cmds=''
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
	    echo "local: *; };" >> $output_objdir/$libname.ver~
	    $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
module_cmds=''
module_expsym_cmds=''
with_gnu_ld='yes'
allow_undefined_flag=''
no_undefined_flag=''
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_flag_spec_ld=''
hardcode_libdir_separator=''
hardcode_direct='no'
hardcode_direct_absolute='no'
hardcode_minus_L='no'
hardcode_shlibpath_var='unsupported'
hardcode_automatic='no'
inherit_rpath='no'
link_all_deplibs='unknown'
fix_srcfile_path=''
always_export_symbols='no'
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
include_expsyms=''
prelink_cmds=''
file_list_spec=''
variables_saved_for_relink='PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH'
need_lib_prefix='no'
need_version='no'
version_type='linux'
runpath_var='LD_RUN_PATH'
shlibpath_var='LD_LIBRARY_PATH'
shlibpath_overrides_runpath='no'
libname_spec='lib$name'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
postinstall_cmds=''
postuninstall_cmds=''
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
finish_eval=''
hardcode_into_libs='yes'
sys_lib_search_path_spec='/usr/lib/gcc/i686-linux-gnu/4.6.1 /usr/lib/i386-linux-gnu /usr/lib /lib/i386-linux-gnu /lib'
sys_lib_dlsearch_path_spec='/lib /usr/lib /lib64 /usr/lib64 /usr/lib/i386-linux-gnu/mesa /lib/i386-linux-gnu /usr/lib/i386-linux-gnu /lib/i686-linux-gnu /usr/lib/i686-linux-gnu /usr/local/lib '
hardcode_action='immediate'
enable_dlopen='unknown'
enable_dlopen_self='unknown'
enable_dlopen_self_static='unknown'
old_striplib='strip --strip-debug'
striplib='strip --strip-unneeded'

LTCC='gcc'
LTCFLAGS='-g -O2'
compiler='gcc'

# Quote evaled strings.
for var in SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag OBJDUMP deplibs_check_method file_magic_cmd AR AR_FLAGS STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix SHELL ECHO lt_prog_compiler_no_builtin_flag lt_prog_compiler_wl lt_prog_compiler_pic lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_flag_spec_ld hardcode_libdir_separator fix_srcfile_path exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec finish_eval old_striplib striplib; do
    case `eval \\$ECHO "X\\$$var"` in
    *[\\\`\"\$]*)
      eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\$$var\\\""
      ;;
    esac
done

# Double-quote double-evaled strings.
for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec sys_lib_dlsearch_path_spec; do
    case `eval \\$ECHO "X\\$$var"` in
    *[\\\`\"\$]*)
      eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\$$var\\\""
      ;;
    esac
done

# Fix-up fallback echo if it was mangled by the above quoting rules.
case $lt_ECHO in
*'\$0 --fallback-echo"')  lt_ECHO=`$ECHO "X$lt_ECHO" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
  ;;
esac

ac_aux_dir='.'
xsi_shell='yes'
lt_shell_append='yes'

# See if we are running on zsh, and set the options which allow our
# commands through without removal of \ escapes INIT.
if test -n "${ZSH_VERSION+set}" ; then
   setopt NO_GLOB_SUBST
fi


    PACKAGE='htop'
    VERSION='0.9'
    TIMESTAMP=''
    RM='rm -f'
    ofile='libtool'





# Handling of arguments.
for ac_config_target in $ac_config_targets
do
  case $ac_config_target in
    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
    "plpa-1.3.2/src/libplpa/plpa_config.h") CONFIG_HEADERS="$CONFIG_HEADERS plpa-1.3.2/src/libplpa/plpa_config.h" ;;
    "plpa-1.3.2/src/libplpa/plpa.h") CONFIG_HEADERS="$CONFIG_HEADERS plpa-1.3.2/src/libplpa/plpa.h" ;;
    "plpa-1.3.2/Makefile") CONFIG_FILES="$CONFIG_FILES plpa-1.3.2/Makefile" ;;
    "plpa-1.3.2/src/Makefile") CONFIG_FILES="$CONFIG_FILES plpa-1.3.2/src/Makefile" ;;
    "plpa-1.3.2/src/libplpa/Makefile") CONFIG_FILES="$CONFIG_FILES plpa-1.3.2/src/libplpa/Makefile" ;;
    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
    "htop.1") CONFIG_FILES="$CONFIG_FILES htop.1" ;;

  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
   { (exit 1); exit 1; }; };;
  esac
done


# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
  tmp=
  trap 'exit_status=$?
  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=./conf$$-$RANDOM
  (umask 077 && mkdir "$tmp")
} ||
{
   echo "$me: cannot create a temporary directory in ." >&2
   { (exit 1); exit 1; }
}

#
# Set up the sed scripts for CONFIG_FILES section.
#

# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "$CONFIG_FILES"; then

cat >"$tmp/subs-1.sed" <<\CEOF
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@SHELL@,|#_!!_#|/bin/sh,g
s,@PATH_SEPARATOR@,|#_!!_#|:,g
s,@PACKAGE_NAME@,|#_!!_#|htop,g
s,@PACKAGE_TARNAME@,|#_!!_#|htop,g
s,@PACKAGE_VERSION@,|#_!!_#|0.9,g
s,@PACKAGE_STRING@,|#_!!_#|htop 0.9,g
s,@PACKAGE_BUGREPORT@,|#_!!_#|loderunner@|#_!!_#|users.sourceforge.net,g
s,@exec_prefix@,|#_!!_#|${prefix},g
s,@prefix@,|#_!!_#|/usr/local,g
s,@program_transform_name@,|#_!!_#|s\,x\,x\,,g
s,@bindir@,|#_!!_#|${exec_prefix}/bin,g
s,@sbindir@,|#_!!_#|${exec_prefix}/sbin,g
s,@libexecdir@,|#_!!_#|${exec_prefix}/libexec,g
s,@datarootdir@,|#_!!_#|${prefix}/share,g
s,@datadir@,|#_!!_#|${datarootdir},g
s,@sysconfdir@,|#_!!_#|${prefix}/etc,g
s,@sharedstatedir@,|#_!!_#|${prefix}/com,g
s,@localstatedir@,|#_!!_#|${prefix}/var,g
s,@includedir@,|#_!!_#|${prefix}/include,g
s,@oldincludedir@,|#_!!_#|/usr/include,g
s,@docdir@,|#_!!_#|${datarootdir}/doc/${PACKAGE_TARNAME},g
s,@infodir@,|#_!!_#|${datarootdir}/info,g
s,@htmldir@,|#_!!_#|${docdir},g
s,@dvidir@,|#_!!_#|${docdir},g
s,@pdfdir@,|#_!!_#|${docdir},g
s,@psdir@,|#_!!_#|${docdir},g
s,@libdir@,|#_!!_#|${exec_prefix}/lib,g
s,@localedir@,|#_!!_#|${datarootdir}/locale,g
s,@mandir@,|#_!!_#|${datarootdir}/man,g
s,@DEFS@,|#_!!_#|-DHAVE_CONFIG_H,g
s,@ECHO_C@,|#_!!_#|,g
s,@ECHO_N@,|#_!!_#|-n,g
s,@ECHO_T@,|#_!!_#|,g
s,@LIBS@,|#_!!_#|-lncurses -lm ,g
s,@build_alias@,|#_!!_#|,g
s,@host_alias@,|#_!!_#|,g
s,@target_alias@,|#_!!_#|,g
s,@INSTALL_PROGRAM@,|#_!!_#|${INSTALL},g
s,@INSTALL_SCRIPT@,|#_!!_#|${INSTALL},g
s,@INSTALL_DATA@,|#_!!_#|${INSTALL} -m 644,g
s,@am__isrc@,|#_!!_#|,g
s,@CYGPATH_W@,|#_!!_#|echo,g
s,@PACKAGE@,|#_!!_#|htop,g
s,@VERSION@,|#_!!_#|0.9,g
s,@ACLOCAL@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run aclocal-1.10,g
s,@AUTOCONF@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run autoconf,g
s,@AUTOMAKE@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run automake-1.10,g
s,@AUTOHEADER@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run autoheader,g
s,@MAKEINFO@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run makeinfo,g
s,@install_sh@,|#_!!_#|$(SHELL) /home/pundiramit/linaro/smp/htop-0.9/install-sh,g
s,@STRIP@,|#_!!_#|strip,g
s,@INSTALL_STRIP_PROGRAM@,|#_!!_#|$(install_sh) -c -s,g
s,@mkdir_p@,|#_!!_#|/bin/mkdir -p,g
s,@AWK@,|#_!!_#|mawk,g
s,@SET_MAKE@,|#_!!_#|,g
s,@am__leading_dot@,|#_!!_#|.,g
s,@AMTAR@,|#_!!_#|${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run tar,g
s,@am__tar@,|#_!!_#|${AMTAR} chof - "$$tardir",g
s,@am__untar@,|#_!!_#|${AMTAR} xf -,g
s,@CC@,|#_!!_#|gcc,g
s,@CFLAGS@,|#_!!_#|-g -O2,g
s,@LDFLAGS@,|#_!!_#|,g
s,@CPPFLAGS@,|#_!!_#|,g
s,@ac_ct_CC@,|#_!!_#|gcc,g
s,@EXEEXT@,|#_!!_#|,g
s,@OBJEXT@,|#_!!_#|o,g
s,@DEPDIR@,|#_!!_#|.deps,g
s,@am__include@,|#_!!_#|include,g
s,@am__quote@,|#_!!_#|,g
s,@AMDEP_TRUE@,|#_!!_#|,g
s,@AMDEP_FALSE@,|#_!!_#|#,g
s,@AMDEPBACKSLASH@,|#_!!_#|\\,g
s,@CCDEPMODE@,|#_!!_#|depmode=gcc3,g
s,@am__fastdepCC_TRUE@,|#_!!_#|,g
s,@am__fastdepCC_FALSE@,|#_!!_#|#,g
s,@LIBTOOL@,|#_!!_#|$(SHELL) $(top_builddir)/libtool,g
s,@build@,|#_!!_#|i686-pc-linux-gnu,g
s,@build_cpu@,|#_!!_#|i686,g
s,@build_vendor@,|#_!!_#|pc,g
s,@build_os@,|#_!!_#|linux-gnu,g
s,@host@,|#_!!_#|i686-pc-linux-gnu,g
s,@host_cpu@,|#_!!_#|i686,g
s,@host_vendor@,|#_!!_#|pc,g
s,@host_os@,|#_!!_#|linux-gnu,g
s,@SED@,|#_!!_#|/bin/sed,g
s,@GREP@,|#_!!_#|/bin/grep,g
s,@EGREP@,|#_!!_#|/bin/grep -E,g
s,@FGREP@,|#_!!_#|/bin/grep -F,g
s,@LD@,|#_!!_#|/usr/bin/ld,g
s,@DUMPBIN@,|#_!!_#|,g
s,@ac_ct_DUMPBIN@,|#_!!_#|,g
s,@NM@,|#_!!_#|/usr/bin/nm -B,g
s,@LN_S@,|#_!!_#|ln -s,g
s,@OBJDUMP@,|#_!!_#|objdump,g
s,@AR@,|#_!!_#|ar,g
s,@RANLIB@,|#_!!_#|ranlib,g
s,@lt_ECHO@,|#_!!_#|echo,g
CEOF
cat >"$tmp/subs-2.sed" <<\CEOF
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
s,@DSYMUTIL@,|#_!!_#|,g
s,@NMEDIT@,|#_!!_#|,g
s,@LIPO@,|#_!!_#|,g
s,@OTOOL@,|#_!!_#|,g
s,@OTOOL64@,|#_!!_#|,g
s,@CPP@,|#_!!_#|gcc -E,g
s,@LIBOBJS@,|#_!!_#|,g
s,@LEX@,|#_!!_#|flex,g
s,@LEX_OUTPUT_ROOT@,|#_!!_#|lex.yy,g
s,@LEXLIB@,|#_!!_#|-lfl,g
s,@YACC@,|#_!!_#|bison -y,g
s,@YFLAGS@,|#_!!_#|,g
s,@PLPA_BUILD_STANDALONE_TRUE@,|#_!!_#|#,g
s,@PLPA_BUILD_STANDALONE_FALSE@,|#_!!_#|,g
s,@PLPA_BUILD_EXECUTABLES_TRUE@,|#_!!_#|#,g
s,@PLPA_BUILD_EXECUTABLES_FALSE@,|#_!!_#|,g
s,@HAVE_PLPA_TRUE@,|#_!!_#|,g
s,@HAVE_PLPA_FALSE@,|#_!!_#|#,g
s,@LTLIBOBJS@,|#_!!_#|,g
:end
s/|#_!!_#|//g
CEOF
fi # test -n "$CONFIG_FILES"


for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
do
  case $ac_tag in
  :[FHLC]) ac_mode=$ac_tag; continue;;
  esac
  case $ac_mode$ac_tag in
  :[FHL]*:*);;
  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
echo "$as_me: error: Invalid tag $ac_tag." >&2;}
   { (exit 1); exit 1; }; };;
  :[FH]-) ac_tag=-:-;;
  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
  esac
  ac_save_IFS=$IFS
  IFS=:
  set x $ac_tag
  IFS=$ac_save_IFS
  shift
  ac_file=$1
  shift

  case $ac_mode in
  :L) ac_source=$1;;
  :[FH])
    ac_file_inputs=
    for ac_f
    do
      case $ac_f in
      -) ac_f="$tmp/stdin";;
      *) # Look for the file first in the build tree, then in the source tree
	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
	 # because $ac_f cannot contain `:'.
	 test -f "$ac_f" ||
	   case $ac_f in
	   [\\/$]*) false;;
	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
	   esac ||
	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
echo "$as_me: error: cannot find input file: $ac_f" >&2;}
   { (exit 1); exit 1; }; };;
      esac
      ac_file_inputs="$ac_file_inputs $ac_f"
    done

    # Let's still pretend it is `configure' which instantiates (i.e., don't
    # use $as_me), people would be surprised to read:
    #    /* config.h.  Generated by config.status.  */
    configure_input="Generated from "`IFS=:
	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
    if test x"$ac_file" != x-; then
      configure_input="$ac_file.  $configure_input"
      { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
    fi

    case $ac_tag in
    *:-:* | *:-) cat >"$tmp/stdin";;
    esac
    ;;
  esac

  ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  { as_dir="$ac_dir"
  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
echo "$as_me: error: cannot create directory $as_dir" >&2;}
   { (exit 1); exit 1; }; }; }
  ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix


  case $ac_mode in
  :F)
  #
  # CONFIG_FILE
  #

  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
  esac
  ac_MKDIR_P=$MKDIR_P
  case $MKDIR_P in
  [\\/$]* | ?:[\\/]* ) ;;
  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
  esac
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=

case `sed -n '/datarootdir/ {
  p
  q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p
' $ac_file_inputs` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
  ac_datarootdir_hack='
  s&@datadir@&${datarootdir}&g
  s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g
  s&@infodir@&${datarootdir}/info&g
  s&@localedir@&${datarootdir}/locale&g
  s&@mandir@&${datarootdir}/man&g
    s&\${datarootdir}&${prefix}/share&g' ;;
esac
  sed "/^[	 ]*VPATH[	 ]*=/{
s/:*\$(srcdir):*/:/
s/:*\${srcdir}:*/:/
s/:*@srcdir@:*/:/
s/^\([^=]*=[	 ]*\):*/\1/
s/:*$//
s/^[^=]*=[	 ]*$//
}

:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s&@configure_input@&$configure_input&;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out

test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&5
echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&2;}

  rm -f "$tmp/stdin"
  case $ac_file in
  -) cat "$tmp/out"; rm -f "$tmp/out";;
  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
  esac
 ;;
  :H)
  #
  # CONFIG_HEADER
  #
    # First, check the format of the line:
    cat >"$tmp/defines.sed" <<\CEOF
/^[	 ]*#[	 ]*undef[	 ][	 ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[	 ]*$/b def
/^[	 ]*#[	 ]*define[	 ][	 ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[(	 ]/b def
b
:def
s/$/ /
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_NAME\)[	 (].*,\1define\2 "htop" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_TARNAME\)[	 (].*,\1define\2 "htop" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_VERSION\)[	 (].*,\1define\2 "0.9" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_STRING\)[	 (].*,\1define\2 "htop 0.9" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE_BUGREPORT\)[	 (].*,\1define\2 "loderunner@users.sourceforge.net" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PACKAGE\)[	 (].*,\1define\2 "htop" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*VERSION\)[	 (].*,\1define\2 "0.9" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*STDC_HEADERS\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_SYS_TYPES_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_SYS_STAT_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDLIB_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRING_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_MEMORY_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRINGS_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_INTTYPES_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDINT_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_UNISTD_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_DLFCN_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*LT_OBJDIR\)[	 (].*,\1define\2 ".libs/" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_LIBM\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_DIRENT_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*STDC_HEADERS\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDLIB_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRING_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRINGS_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_SYS_PARAM_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_SYS_TIME_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_UNISTD_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_CURSES_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE__BOOL\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDBOOL_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDLIB_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_MALLOC\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STDLIB_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_REALLOC\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*RETSIGTYPE\)[	 (].*,\1define\2 void ,
s,^\([	 #]*\)[^	 ]*\([	 ]*LSTAT_FOLLOWS_SLASHED_SYMLINK\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_MEMMOVE\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRNCASECMP\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRSTR\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_STRDUP\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PROCDIR\)[	 (].*,\1define\2 "/proc" ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_TASKSTATS\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_LIBNCURSES\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_CURSES_H\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*YYTEXT_POINTER\)[	 (].*,\1define\2 1 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PLPA_DEBUG\)[	 (].*,\1define\2 0 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PLPA_SYM_PREFIX\)[	 (].*,\1define\2 plpa_ ,
s,^\([	 #]*\)[^	 ]*\([	 ]*PLPA_SYM_PREFIX_CAPS\)[	 (].*,\1define\2 PLPA_ ,
CEOF
    sed -f "$tmp/defines.sed" $ac_file_inputs >"$tmp/out1"
    # First, check the format of the line:
    cat >"$tmp/defines.sed" <<\CEOF
/^[	 ]*#[	 ]*undef[	 ][	 ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[	 ]*$/b def
/^[	 ]*#[	 ]*define[	 ][	 ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[(	 ]/b def
b
:def
s,^\([	 #]*\)[^	 ]*\([	 ]*PLPA_WANT_VALGRIND_SUPPORT\)[	 (].*,\1define\2 0 ,
s,^\([	 #]*\)[^	 ]*\([	 ]*HAVE_PLPA\)[	 (].*,\1define\2 1 ,
s/ $//
s,^[	 #]*u.*,/* & */,
CEOF
    sed -f "$tmp/defines.sed" "$tmp/out1" >"$tmp/out2"
ac_result="$tmp/out2"
  if test x"$ac_file" != x-; then
    echo "/* $configure_input  */" >"$tmp/config.h"
    cat "$ac_result" >>"$tmp/config.h"
    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
    else
      rm -f $ac_file
      mv "$tmp/config.h" $ac_file
    fi
  else
    echo "/* $configure_input  */"
    cat "$ac_result"
  fi
  rm -f "$tmp/out12"
# Compute $ac_file's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $ac_file | $ac_file:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X$ac_file : 'X\(//\)[^/]' \| \
	 X$ac_file : 'X\(//\)$' \| \
	 X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
echo X$ac_file |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`/stamp-h$_am_stamp_count
 ;;

  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
echo "$as_me: executing $ac_file commands" >&6;}
 ;;
  esac


  case $ac_file$ac_mode in
    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
  # Strip MF so we end up with the name of the file.
  mf=`echo "$mf" | sed -e 's/:.*$//'`
  # Check whether this is an Automake generated Makefile or not.
  # We used to match only the files named `Makefile.in', but
  # some people rename them; so instead we look at the file content.
  # Grep'ing the first line is not enough: some people post-process
  # each Makefile.in and add a new line on top of each file to say so.
  # Grep'ing the whole file is not good either: AIX grep has a line
  # limit of 2048, but all sed's we know have understand at least 4000.
  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
    dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$mf" : 'X\(//\)[^/]' \| \
	 X"$mf" : 'X\(//\)$' \| \
	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$mf" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  else
    continue
  fi
  # Extract the definition of DEPDIR, am__include, and am__quote
  # from the Makefile without running `make'.
  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
  test -z "$DEPDIR" && continue
  am__include=`sed -n 's/^am__include = //p' < "$mf"`
  test -z "am__include" && continue
  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n 's/^U = //p' < "$mf"`
  # Find all dependency output files, they are included files with
  # $(DEPDIR) in their names.  We invoke sed twice because it is the
  # simplest approach to changing $(DEPDIR) to its actual value in the
  # expansion.
  for file in `sed -n "
    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
    fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$file" : 'X\(//\)[^/]' \| \
	 X"$file" : 'X\(//\)$' \| \
	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
    { as_dir=$dirpart/$fdir
  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
echo "$as_me: error: cannot create directory $as_dir" >&2;}
   { (exit 1); exit 1; }; }; }
    # echo "creating $dirpart/$file"
    echo '# dummy' > "$dirpart/$file"
  done
done
 ;;
    "libtool":C)

    # See if we are running on zsh, and set the options which allow our
    # commands through without removal of \ escapes.
    if test -n "${ZSH_VERSION+set}" ; then
      setopt NO_GLOB_SUBST
    fi

    cfgfile="${ofile}T"
    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
    $RM "$cfgfile"

    cat <<_LT_EOF >> "$cfgfile"
#! $SHELL

# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
#                 2006, 2007, 2008 Free Software Foundation, Inc.
#   Written by Gordon Matzigkeit, 1996
#
#   This file is part of GNU Libtool.
#
# GNU Libtool is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# As a special exception to the GNU General Public License,
# if you distribute this file as part of a program or library that
# is built using GNU Libtool, you may include this file under the
# same distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU Libtool; see the file COPYING.  If not, a copy
# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
# obtained by writing to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.


# The names of the tagged configurations supported by this script.
available_tags=""

# ### BEGIN LIBTOOL CONFIG

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Which release of libtool.m4 was used?
macro_version=$macro_version
macro_revision=$macro_revision

# What type of objects to build.
pic_mode=$pic_mode

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host
host_os=$host_os

# The build system.
build_alias=$build_alias
build=$build
build_os=$build_os

# A sed program that does not truncate output.
SED=$lt_SED

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="\$SED -e 1s/^X//"

# A grep program that handles long lines.
GREP=$lt_GREP

# An ERE matcher.
EGREP=$lt_EGREP

# A literal string matcher.
FGREP=$lt_FGREP

# A BSD- or MS-compatible name lister.
NM=$lt_NM

# Whether we need soft or hard links.
LN_S=$lt_LN_S

# What is the maximum length of a command?
max_cmd_len=$max_cmd_len

# Object file suffix (normally "o").
objext=$ac_objext

# Executable file suffix (normally "").
exeext=$exeext

# whether the shell understands "unset".
lt_unset=$lt_unset

# turn spaces into newlines.
SP2NL=$lt_lt_SP2NL

# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# An object symbol dumper.
OBJDUMP=$lt_OBJDUMP

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method == "file_magic".
file_magic_cmd=$lt_file_magic_cmd

# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS

# A symbol stripping program.
STRIP=$lt_STRIP

# Commands used to install an old-style archive.
RANLIB=$lt_RANLIB
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# A C compiler.
LTCC=$lt_CC

# LTCC compiler flags.
LTCFLAGS=$lt_CFLAGS

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe

# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl

# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address

# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# An echo program that does not interpret backslashes.
ECHO=$lt_ECHO

# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD

# Must we lock files when doing compilation?
need_locks=$lt_need_locks

# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL

# Tool to change global to local symbols on Mac OS X.
NMEDIT=$lt_NMEDIT

# Tool to manipulate fat objects and archives on Mac OS X.
LIPO=$lt_LIPO

# ldd/readelf like tool for Mach-O binaries on Mac OS X.
OTOOL=$lt_OTOOL

# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
OTOOL64=$lt_OTOOL64

# Old archive suffix (normally "a").
libext=$libext

# Shared library suffix (normally ".so").
shrext_cmds=$lt_shrext_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Variables whose values should be saved in libtool wrapper scripts and
# restored at link time.
variables_saved_for_relink=$lt_variables_saved_for_relink

# Do we need the "lib" prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Library versioning type.
version_type=$version_type

# Shared library runtime path variable.
runpath_var=$runpath_var

# Shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# Format of library name prefix.
libname_spec=$lt_libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds

# Command to use after uninstallation of a shared archive.
postuninstall_cmds=$lt_postuninstall_cmds

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# As "finish_cmds", except a single script fragment to be evaled but
# not shown.
finish_eval=$lt_finish_eval

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Run-time system search path for libraries.
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib


# The linker used to build libraries.
LD=$lt_LD

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds

# A language specific compiler.
CC=$lt_compiler

# Is the compiler the GNU compiler?
with_gcc=$GCC

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds
module_expsym_cmds=$lt_module_expsym_cmds

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec

# If ld is used when linking, flag to hardcode \$libdir into a binary
# during linking.  This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator

# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct

# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path=$lt_fix_srcfile_path

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# ### END LIBTOOL CONFIG

_LT_EOF

  case $host_os in
  aix3*)
    cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
_LT_EOF
    ;;
  esac


ltmain="$ac_aux_dir/ltmain.sh"


  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
    || (rm -f "$cfgfile"; exit 1)

  case $xsi_shell in
  yes)
    cat << \_LT_EOF >> "$cfgfile"

# func_dirname file append nondir_replacement
# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
func_dirname ()
{
  case ${1} in
    */*) func_dirname_result="${1%/*}${2}" ;;
    *  ) func_dirname_result="${3}" ;;
  esac
}

# func_basename file
func_basename ()
{
  func_basename_result="${1##*/}"
}

# func_dirname_and_basename file append nondir_replacement
# perform func_basename and func_dirname in a single function
# call:
#   dirname:  Compute the dirname of FILE.  If nonempty,
#             add APPEND to the result, otherwise set result
#             to NONDIR_REPLACEMENT.
#             value returned in "$func_dirname_result"
#   basename: Compute filename of FILE.
#             value retuned in "$func_basename_result"
# Implementation must be kept synchronized with func_dirname
# and func_basename. For efficiency, we do not delegate to
# those functions but instead duplicate the functionality here.
func_dirname_and_basename ()
{
  case ${1} in
    */*) func_dirname_result="${1%/*}${2}" ;;
    *  ) func_dirname_result="${3}" ;;
  esac
  func_basename_result="${1##*/}"
}

# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
func_stripname ()
{
  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
  # positional parameters, so assign one to ordinary parameter first.
  func_stripname_result=${3}
  func_stripname_result=${func_stripname_result#"${1}"}
  func_stripname_result=${func_stripname_result%"${2}"}
}

# func_opt_split
func_opt_split ()
{
  func_opt_split_opt=${1%%=*}
  func_opt_split_arg=${1#*=}
}

# func_lo2o object
func_lo2o ()
{
  case ${1} in
    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
    *)    func_lo2o_result=${1} ;;
  esac
}

# func_xform libobj-or-source
func_xform ()
{
  func_xform_result=${1%.*}.lo
}

# func_arith arithmetic-term...
func_arith ()
{
  func_arith_result=$(( $* ))
}

# func_len string
# STRING may not start with a hyphen.
func_len ()
{
  func_len_result=${#1}
}

_LT_EOF
    ;;
  *) # Bourne compatible functions.
    cat << \_LT_EOF >> "$cfgfile"

# func_dirname file append nondir_replacement
# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
func_dirname ()
{
  # Extract subdirectory from the argument.
  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
  if test "X$func_dirname_result" = "X${1}"; then
    func_dirname_result="${3}"
  else
    func_dirname_result="$func_dirname_result${2}"
  fi
}

# func_basename file
func_basename ()
{
  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
}


# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
# func_strip_suffix prefix name
func_stripname ()
{
  case ${2} in
    .*) func_stripname_result=`$ECHO "X${3}" \
           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
    *)  func_stripname_result=`$ECHO "X${3}" \
           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
  esac
}

# sed scripts:
my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
my_sed_long_arg='1s/^-[^=]*=//'

# func_opt_split
func_opt_split ()
{
  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
}

# func_lo2o object
func_lo2o ()
{
  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
}

# func_xform libobj-or-source
func_xform ()
{
  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
}

# func_arith arithmetic-term...
func_arith ()
{
  func_arith_result=`expr "$@"`
}

# func_len string
# STRING may not start with a hyphen.
func_len ()
{
  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
}

_LT_EOF
esac

case $lt_shell_append in
  yes)
    cat << \_LT_EOF >> "$cfgfile"

# func_append var value
# Append VALUE to the end of shell variable VAR.
func_append ()
{
  eval "$1+=\$2"
}
_LT_EOF
    ;;
  *)
    cat << \_LT_EOF >> "$cfgfile"

# func_append var value
# Append VALUE to the end of shell variable VAR.
func_append ()
{
  eval "$1=\$$1\$2"
}

_LT_EOF
    ;;
  esac


  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
    || (rm -f "$cfgfile"; exit 1)

  mv -f "$cfgfile" "$ofile" ||
    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
  chmod +x "$ofile"

 ;;

  esac
done # for ac_tag


{ (exit 0); exit 0; }