| # Makefile.in generated by automake 1.10 from Makefile.am. |
| # plpa-1.3.2/src/Makefile. Generated from Makefile.in by configure. |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| |
| |
| # |
| # Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana |
| # University Research and Technology |
| # Corporation. All rights reserved. |
| # Copyright (c) 2004-2005 The Regents of the University of California. |
| # All rights reserved. |
| # Copyright (c) 2007 Cisco Systems, Inc. All rights reserved. |
| # $COPYRIGHT$ |
| # |
| # Additional copyrights may follow |
| # |
| # $HEADER$ |
| # |
| |
| pkgdatadir = $(datadir)/htop |
| pkglibdir = $(libdir)/htop |
| pkgincludedir = $(includedir)/htop |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = i686-pc-linux-gnu |
| host_triplet = i686-pc-linux-gnu |
| subdir = plpa-1.3.2/src |
| DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/acinclude.m4 $(top_srcdir)/plpa-1.3.2/plpa.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/config.h \ |
| $(top_builddir)/plpa-1.3.2/src/libplpa/plpa_config.h \ |
| $(top_builddir)/plpa-1.3.2/src/libplpa/plpa.h |
| CONFIG_CLEAN_FILES = |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-dvi-recursive install-exec-recursive \ |
| install-html-recursive install-info-recursive \ |
| install-pdf-recursive install-ps-recursive install-recursive \ |
| installcheck-recursive installdirs-recursive pdf-recursive \ |
| ps-recursive uninstall-recursive |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = ${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run aclocal-1.10 |
| AMTAR = ${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run tar |
| AR = ar |
| AUTOCONF = ${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run autoconf |
| AUTOHEADER = ${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run autoheader |
| AUTOMAKE = ${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run automake-1.10 |
| AWK = mawk |
| CC = gcc |
| CCDEPMODE = depmode=gcc3 |
| CFLAGS = -g -O2 |
| CPP = gcc -E |
| CPPFLAGS = |
| CYGPATH_W = echo |
| DEFS = -DHAVE_CONFIG_H |
| DEPDIR = .deps |
| DSYMUTIL = |
| DUMPBIN = |
| ECHO_C = |
| ECHO_N = -n |
| ECHO_T = |
| EGREP = /bin/grep -E |
| EXEEXT = |
| FGREP = /bin/grep -F |
| GREP = /bin/grep |
| INSTALL = /usr/bin/install -c |
| INSTALL_DATA = ${INSTALL} -m 644 |
| INSTALL_PROGRAM = ${INSTALL} |
| INSTALL_SCRIPT = ${INSTALL} |
| INSTALL_STRIP_PROGRAM = $(install_sh) -c -s |
| LD = /usr/bin/ld |
| LDFLAGS = |
| LEX = flex |
| LEXLIB = -lfl |
| LEX_OUTPUT_ROOT = lex.yy |
| LIBOBJS = |
| LIBS = -lncurses -lm |
| LIBTOOL = $(SHELL) $(top_builddir)/libtool |
| LIPO = |
| LN_S = ln -s |
| LTLIBOBJS = |
| MAKEINFO = ${SHELL} /home/pundiramit/linaro/smp/htop-0.9/missing --run makeinfo |
| MKDIR_P = /bin/mkdir -p |
| NM = /usr/bin/nm -B |
| NMEDIT = |
| OBJDUMP = objdump |
| OBJEXT = o |
| OTOOL = |
| OTOOL64 = |
| PACKAGE = htop |
| PACKAGE_BUGREPORT = loderunner@users.sourceforge.net |
| PACKAGE_NAME = htop |
| PACKAGE_STRING = htop 0.9 |
| PACKAGE_TARNAME = htop |
| PACKAGE_VERSION = 0.9 |
| PATH_SEPARATOR = : |
| RANLIB = ranlib |
| SED = /bin/sed |
| SET_MAKE = |
| SHELL = /bin/sh |
| STRIP = strip |
| VERSION = 0.9 |
| YACC = bison -y |
| YFLAGS = |
| abs_builddir = /home/pundiramit/linaro/smp/htop-0.9/plpa-1.3.2/src |
| abs_srcdir = /home/pundiramit/linaro/smp/htop-0.9/plpa-1.3.2/src |
| abs_top_builddir = /home/pundiramit/linaro/smp/htop-0.9 |
| abs_top_srcdir = /home/pundiramit/linaro/smp/htop-0.9 |
| ac_ct_CC = gcc |
| ac_ct_DUMPBIN = |
| am__include = include |
| am__leading_dot = . |
| am__quote = |
| am__tar = ${AMTAR} chof - "$$tardir" |
| am__untar = ${AMTAR} xf - |
| bindir = ${exec_prefix}/bin |
| build = i686-pc-linux-gnu |
| build_alias = |
| build_cpu = i686 |
| build_os = linux-gnu |
| build_vendor = pc |
| builddir = . |
| datadir = ${datarootdir} |
| datarootdir = ${prefix}/share |
| docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} |
| dvidir = ${docdir} |
| exec_prefix = ${prefix} |
| host = i686-pc-linux-gnu |
| host_alias = |
| host_cpu = i686 |
| host_os = linux-gnu |
| host_vendor = pc |
| htmldir = ${docdir} |
| includedir = ${prefix}/include |
| infodir = ${datarootdir}/info |
| install_sh = $(SHELL) /home/pundiramit/linaro/smp/htop-0.9/install-sh |
| libdir = ${exec_prefix}/lib |
| libexecdir = ${exec_prefix}/libexec |
| localedir = ${datarootdir}/locale |
| localstatedir = ${prefix}/var |
| lt_ECHO = echo |
| mandir = ${datarootdir}/man |
| mkdir_p = /bin/mkdir -p |
| oldincludedir = /usr/include |
| pdfdir = ${docdir} |
| prefix = /usr/local |
| program_transform_name = s,x,x, |
| psdir = ${docdir} |
| sbindir = ${exec_prefix}/sbin |
| sharedstatedir = ${prefix}/com |
| srcdir = . |
| sysconfdir = ${prefix}/etc |
| target_alias = |
| top_builddir = ../.. |
| top_srcdir = ../.. |
| SUBDIRS = libplpa |
| all: all-recursive |
| |
| .SUFFIXES: |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu plpa-1.3.2/src/Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu plpa-1.3.2/src/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| $(RECURSIVE_CLEAN_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| distdir=`$(am__cd) $(distdir) && pwd`; \ |
| top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$top_distdir" \ |
| distdir="$$distdir/$$subdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile |
| installdirs: installdirs-recursive |
| installdirs-am: |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: |
| |
| install-dvi: install-dvi-recursive |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-info: install-info-recursive |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-ps: install-ps-recursive |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: |
| |
| .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ |
| install-strip |
| |
| .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| all all-am check check-am clean clean-generic clean-libtool \ |
| ctags ctags-recursive distclean distclean-generic \ |
| distclean-libtool distclean-tags distdir dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-dvi install-dvi-am install-exec \ |
| install-exec-am install-html install-html-am install-info \ |
| install-info-am install-man install-pdf install-pdf-am \ |
| install-ps install-ps-am install-strip installcheck \ |
| installcheck-am installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ |
| uninstall uninstall-am |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
