| /* |
| * INET An implementation of the TCP/IP protocol suite for the LINUX |
| * operating system. INET is implemented using the BSD Socket |
| * interface as the means of communication with the user level. |
| * |
| * Definitions of the socket-level I/O control calls. |
| * |
| * Version: @(#)sockios.h 1.0.2 03/09/93 |
| * |
| * Authors: Ross Biro |
| * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #ifndef _LINUX_SOCKIOS_H |
| #define _LINUX_SOCKIOS_H |
| |
| #include <asm/sockios.h> |
| |
| /* Linux-specific socket ioctls */ |
| #define SIOCINQ FIONREAD |
| #define SIOCOUTQ TIOCOUTQ |
| |
| /* Routing table calls. */ |
| #define SIOCADDRT 0x890B /* add routing table entry */ |
| #define SIOCDELRT 0x890C /* delete routing table entry */ |
| #define SIOCRTMSG 0x890D /* call to routing system */ |
| |
| /* Socket configuration controls. */ |
| #define SIOCGIFNAME 0x8910 /* get iface name */ |
| #define SIOCSIFLINK 0x8911 /* set iface channel */ |
| #define SIOCGIFCONF 0x8912 /* get iface list */ |
| #define SIOCGIFFLAGS 0x8913 /* get flags */ |
| #define SIOCSIFFLAGS 0x8914 /* set flags */ |
| #define SIOCGIFADDR 0x8915 /* get PA address */ |
| #define SIOCSIFADDR 0x8916 /* set PA address */ |
| #define SIOCGIFDSTADDR 0x8917 /* get remote PA address */ |
| #define SIOCSIFDSTADDR 0x8918 /* set remote PA address */ |
| #define SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ |
| #define SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ |
| #define SIOCGIFNETMASK 0x891b /* get network PA mask */ |
| #define SIOCSIFNETMASK 0x891c /* set network PA mask */ |
| #define SIOCGIFMETRIC 0x891d /* get metric */ |
| #define SIOCSIFMETRIC 0x891e /* set metric */ |
| #define SIOCGIFMEM 0x891f /* get memory address (BSD) */ |
| #define SIOCSIFMEM 0x8920 /* set memory address (BSD) */ |
| #define SIOCGIFMTU 0x8921 /* get MTU size */ |
| #define SIOCSIFMTU 0x8922 /* set MTU size */ |
| #define SIOCSIFNAME 0x8923 /* set interface name */ |
| #define SIOCSIFHWADDR 0x8924 /* set hardware address */ |
| #define SIOCGIFENCAP 0x8925 /* get/set encapsulations */ |
| #define SIOCSIFENCAP 0x8926 |
| #define SIOCGIFHWADDR 0x8927 /* Get hardware address */ |
| #define SIOCGIFSLAVE 0x8929 /* Driver slaving support */ |
| #define SIOCSIFSLAVE 0x8930 |
| #define SIOCADDMULTI 0x8931 /* Multicast address lists */ |
| #define SIOCDELMULTI 0x8932 |
| #define SIOCGIFINDEX 0x8933 /* name -> if_index mapping */ |
| #define SIOGIFINDEX SIOCGIFINDEX /* misprint compatibility :-) */ |
| #define SIOCSIFPFLAGS 0x8934 /* set/get extended flags set */ |
| #define SIOCGIFPFLAGS 0x8935 |
| #define SIOCDIFADDR 0x8936 /* delete PA address */ |
| #define SIOCSIFHWBROADCAST 0x8937 /* set hardware broadcast addr */ |
| #define SIOCGIFCOUNT 0x8938 /* get number of devices */ |
| #define SIOCKILLADDR 0x8939 /* kill sockets with this local addr */ |
| |
| #define SIOCGIFBR 0x8940 /* Bridging support */ |
| #define SIOCSIFBR 0x8941 /* Set bridging options */ |
| |
| #define SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ |
| #define SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ |
| |
| /* SIOCGIFDIVERT was: 0x8944 Frame diversion support */ |
| /* SIOCSIFDIVERT was: 0x8945 Set frame diversion options */ |
| |
| #define SIOCETHTOOL 0x8946 /* Ethtool interface */ |
| |
| #define SIOCGMIIPHY 0x8947 /* Get address of MII PHY in use. */ |
| #define SIOCGMIIREG 0x8948 /* Read MII PHY register. */ |
| #define SIOCSMIIREG 0x8949 /* Write MII PHY register. */ |
| |
| #define SIOCWANDEV 0x894A /* get/set netdev parameters */ |
| |
| /* ARP cache control calls. */ |
| /* 0x8950 - 0x8952 * obsolete calls, don't re-use */ |
| #define SIOCDARP 0x8953 /* delete ARP table entry */ |
| #define SIOCGARP 0x8954 /* get ARP table entry */ |
| #define SIOCSARP 0x8955 /* set ARP table entry */ |
| |
| /* RARP cache control calls. */ |
| #define SIOCDRARP 0x8960 /* delete RARP table entry */ |
| #define SIOCGRARP 0x8961 /* get RARP table entry */ |
| #define SIOCSRARP 0x8962 /* set RARP table entry */ |
| |
| /* Driver configuration calls */ |
| |
| #define SIOCGIFMAP 0x8970 /* Get device parameters */ |
| #define SIOCSIFMAP 0x8971 /* Set device parameters */ |
| |
| /* DLCI configuration calls */ |
| |
| #define SIOCADDDLCI 0x8980 /* Create new DLCI device */ |
| #define SIOCDELDLCI 0x8981 /* Delete DLCI device */ |
| |
| #define SIOCGIFVLAN 0x8982 /* 802.1Q VLAN support */ |
| #define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */ |
| |
| /* bonding calls */ |
| |
| #define SIOCBONDENSLAVE 0x8990 /* enslave a device to the bond */ |
| #define SIOCBONDRELEASE 0x8991 /* release a slave from the bond*/ |
| #define SIOCBONDSETHWADDR 0x8992 /* set the hw addr of the bond */ |
| #define SIOCBONDSLAVEINFOQUERY 0x8993 /* rtn info about slave state */ |
| #define SIOCBONDINFOQUERY 0x8994 /* rtn info about bond state */ |
| #define SIOCBONDCHANGEACTIVE 0x8995 /* update to a new active slave */ |
| |
| /* bridge calls */ |
| #define SIOCBRADDBR 0x89a0 /* create new bridge device */ |
| #define SIOCBRDELBR 0x89a1 /* remove bridge device */ |
| #define SIOCBRADDIF 0x89a2 /* add interface to bridge */ |
| #define SIOCBRDELIF 0x89a3 /* remove interface from bridge */ |
| |
| /* Device private ioctl calls */ |
| |
| /* |
| * These 16 ioctls are available to devices via the do_ioctl() device |
| * vector. Each device should include this file and redefine these names |
| * as their own. Because these are device dependent it is a good idea |
| * _NOT_ to issue them to random objects and hope. |
| * |
| * THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM |
| */ |
| |
| #define SIOCDEVPRIVATE 0x89F0 /* to 89FF */ |
| |
| /* |
| * These 16 ioctl calls are protocol private |
| */ |
| |
| #define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */ |
| #endif /* _LINUX_SOCKIOS_H */ |
