| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| #include "OverrideLog.h" |
| #include "config.h" |
| #include "nfc_hal_int.h" |
| #include "userial.h" |
| extern "C" |
| { |
| #include "nfc_hal_post_reset.h" |
| } |
| #include <string> |
| #include <cutils/properties.h> |
| #include "spdhelper.h" |
| #include "StartupConfig.h" |
| |
| #define LOG_TAG "NfcNciHal" |
| |
| #define FW_PRE_PATCH "FW_PRE_PATCH" |
| #define FW_PATCH "FW_PATCH" |
| #define MAX_RF_DATA_CREDITS "MAX_RF_DATA_CREDITS" |
| |
| #define MAX_BUFFER (512) |
| static char sPrePatchFn[MAX_BUFFER+1]; |
| static char sPatchFn[MAX_BUFFER+1]; |
| static void * sPrmBuf = NULL; |
| static void * sI2cFixPrmBuf = NULL; |
| |
| #define CONFIG_MAX_LEN 256 |
| static UINT8 sConfig [CONFIG_MAX_LEN]; |
| static StartupConfig sStartupConfig; |
| static StartupConfig sLptdConfig; |
| extern UINT8 *p_nfc_hal_dm_start_up_cfg; //defined in the HAL |
| static UINT8 nfa_dm_start_up_vsc_cfg[CONFIG_MAX_LEN]; |
| extern UINT8 *p_nfc_hal_dm_start_up_vsc_cfg; //defined in the HAL |
| extern UINT8 *p_nfc_hal_dm_lptd_cfg; //defined in the HAL |
| extern tSNOOZE_MODE_CONFIG gSnoozeModeCfg; |
| extern tNFC_HAL_CFG *p_nfc_hal_cfg; |
| static void mayDisableSecureElement (StartupConfig& config); |
| |
| /* Default patchfile (in NCD format) */ |
| #ifndef NFA_APP_DEFAULT_PATCHFILE_NAME |
| #define NFA_APP_DEFAULT_PATCHFILE_NAME "\0" |
| #endif |
| |
| /* Default patchfile (in NCD format) */ |
| #ifndef NFA_APP_DEFAULT_I2C_PATCHFILE_NAME |
| #define NFA_APP_DEFAULT_I2C_PATCHFILE_NAME "\0" |
| #endif |
| |
| #define BRCM_43341B0_ID 0x43341b00 |
| |
| tNFC_POST_RESET_CB nfc_post_reset_cb = |
| { |
| /* Default Patch & Pre-Patch */ |
| NFA_APP_DEFAULT_PATCHFILE_NAME, |
| NULL, |
| NFA_APP_DEFAULT_I2C_PATCHFILE_NAME, |
| NULL, |
| |
| /* Default UART baud rate */ |
| NFC_HAL_DEFAULT_BAUD, |
| |
| /* Default tNFC_HAL_DEV_INIT_CFG (flags, num_xtal_cfg, {brcm_hw_id, xtal-freq, xtal-index} ) */ |
| { |
| 1, /* number of valid entries */ |
| { |
| {BRCM_43341B0_ID, 37400, NFC_HAL_XTAL_INDEX_37400}, |
| {0, 0, 0}, |
| {0, 0, 0}, |
| {0, 0, 0}, |
| {0, 0, 0}, |
| } |
| }, |
| |
| /* Default low power mode settings */ |
| NFC_HAL_LP_SNOOZE_MODE_NONE, /* Snooze Mode */ |
| NFC_HAL_LP_IDLE_THRESHOLD_HOST, /* Idle Threshold Host */ |
| NFC_HAL_LP_IDLE_THRESHOLD_HC, /* Idle Threshold HC */ |
| NFC_HAL_LP_ACTIVE_LOW, /* NFC_WAKE Active Mode */ |
| NFC_HAL_LP_ACTIVE_HIGH, /* DH_WAKE Active Mode */ |
| |
| NFA_APP_MAX_NUM_REINIT, /* max retry to get NVM type */ |
| 0, /* current retry count */ |
| TRUE, /* debug mode for downloading patchram */ |
| FALSE /* skip downloading patchram after reinit because of patch download failure */ |
| }; |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function getFileLength |
| ** |
| ** Description return the size of a file |
| ** |
| ** Returns file size in number of bytes |
| ** |
| *******************************************************************************/ |
| static long getFileLength(FILE* fp) |
| { |
| long sz; |
| fseek(fp, 0L, SEEK_END); |
| sz = ftell(fp); |
| fseek(fp, 0L, SEEK_SET); |
| |
| return sz; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function isFileExist |
| ** |
| ** Description Check if file name exists (android does not support fexists) |
| ** |
| ** Returns TRUE if file exists |
| ** |
| *******************************************************************************/ |
| static BOOLEAN isFileExist(const char *pFilename) |
| { |
| FILE *pf; |
| |
| if ((pf = fopen(pFilename, "r")) != NULL) |
| { |
| fclose(pf); |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function findPatchramFile |
| ** |
| ** Description Find the patchram file name specified in the .conf |
| ** |
| ** Returns pointer to the file name |
| ** |
| *******************************************************************************/ |
| static const char* findPatchramFile(const char * pConfigName, char * pBuffer, int bufferLen) |
| { |
| ALOGD("%s: config=%s", __FUNCTION__, pConfigName); |
| |
| if (pConfigName == NULL) |
| { |
| ALOGD("%s No patchfile defined\n", __FUNCTION__); |
| return NULL; |
| } |
| |
| if (GetStrValue(pConfigName, &pBuffer[0], bufferLen)) |
| { |
| ALOGD("%s found patchfile %s\n", __FUNCTION__, pBuffer); |
| return (pBuffer[0] == '\0') ? NULL : pBuffer; |
| } |
| |
| ALOGD("%s Cannot find patchfile '%s'\n", __FUNCTION__, pConfigName); |
| return NULL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: continueAfterSetSnoozeMode |
| ** |
| ** Description: Called after Snooze Mode is enabled. |
| ** |
| ** Returns: none |
| ** |
| *******************************************************************************/ |
| static void continueAfterSetSnoozeMode(tHAL_NFC_STATUS status) |
| { |
| ALOGD("%s: status=%u", __FUNCTION__, status); |
| if (status == NCI_STATUS_OK) |
| HAL_NfcPreInitDone (HAL_NFC_STATUS_OK); |
| else |
| HAL_NfcPreInitDone (HAL_NFC_STATUS_FAILED); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: postDownloadPatchram |
| ** |
| ** Description: Called after patch download |
| ** |
| ** Returns: none |
| ** |
| *******************************************************************************/ |
| static void postDownloadPatchram(tHAL_NFC_STATUS status) |
| { |
| ALOGD("%s: status=%i", __FUNCTION__, status); |
| |
| if (status != HAL_NFC_STATUS_OK) |
| { |
| ALOGE("Patch download failed"); |
| if (status == HAL_NFC_STATUS_REFUSED) |
| { |
| SpdHelper::setPatchAsBad(); |
| } |
| else |
| SpdHelper::incErrorCount(); |
| |
| /* If in SPD Debug mode, fail immediately and obviously */ |
| if (SpdHelper::isSpdDebug()) |
| HAL_NfcPreInitDone (HAL_NFC_STATUS_FAILED); |
| else |
| { |
| /* otherwise, power cycle the chip and let the stack startup normally */ |
| USERIAL_PowerupDevice(0); |
| HAL_NfcPreInitDone (HAL_NFC_STATUS_OK); |
| } |
| } |
| /* Set snooze mode here */ |
| else if (gSnoozeModeCfg.snooze_mode != NFC_HAL_LP_SNOOZE_MODE_NONE) |
| { |
| status = HAL_NfcSetSnoozeMode(gSnoozeModeCfg.snooze_mode, |
| gSnoozeModeCfg.idle_threshold_dh, |
| gSnoozeModeCfg.idle_threshold_nfcc, |
| gSnoozeModeCfg.nfc_wake_active_mode, |
| gSnoozeModeCfg.dh_wake_active_mode, |
| continueAfterSetSnoozeMode); |
| if (status != NCI_STATUS_OK) |
| { |
| ALOGE("%s: Setting snooze mode failed, status=%i", __FUNCTION__, status); |
| HAL_NfcPreInitDone(HAL_NFC_STATUS_FAILED); |
| } |
| } |
| else |
| { |
| ALOGD("%s: Not using Snooze Mode", __FUNCTION__); |
| HAL_NfcPreInitDone(HAL_NFC_STATUS_OK); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: prmCallback |
| ** |
| ** Description: Patchram callback (for static patchram mode) |
| ** |
| ** Returns: none |
| ** |
| *******************************************************************************/ |
| void prmCallback(UINT8 event) |
| { |
| ALOGD("%s: event=0x%x", __FUNCTION__, event); |
| switch (event) |
| { |
| case NFC_HAL_PRM_CONTINUE_EVT: |
| /* This event does not occur if static patchram buf is used */ |
| break; |
| |
| case NFC_HAL_PRM_COMPLETE_EVT: |
| postDownloadPatchram(HAL_NFC_STATUS_OK); |
| break; |
| |
| case NFC_HAL_PRM_ABORT_EVT: |
| postDownloadPatchram(HAL_NFC_STATUS_FAILED); |
| break; |
| |
| case NFC_HAL_PRM_ABORT_INVALID_PATCH_EVT: |
| ALOGD("%s: invalid patch...skipping patch download", __FUNCTION__); |
| postDownloadPatchram(HAL_NFC_STATUS_REFUSED); |
| break; |
| |
| case NFC_HAL_PRM_ABORT_BAD_SIGNATURE_EVT: |
| ALOGD("%s: patch authentication failed", __FUNCTION__); |
| postDownloadPatchram(HAL_NFC_STATUS_REFUSED); |
| break; |
| |
| case NFC_HAL_PRM_ABORT_NO_NVM_EVT: |
| ALOGD("%s: No NVM detected", __FUNCTION__); |
| HAL_NfcPreInitDone(HAL_NFC_STATUS_FAILED); |
| break; |
| |
| default: |
| ALOGD("%s: not handled event=0x%x", __FUNCTION__, event); |
| break; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function getNfaValues |
| ** |
| ** Description Get configuration values needed by NFA layer |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void getNfaValues() |
| { |
| unsigned long num = 0; |
| int actualLen = 0; |
| |
| p_nfc_hal_cfg->nfc_hal_prm_nvm_required = TRUE; //don't download firmware if controller cannot detect EERPOM |
| sStartupConfig.initialize (); |
| sLptdConfig.initialize (); |
| |
| |
| actualLen = GetStrValue (NAME_NFA_DM_START_UP_CFG, (char*)sConfig, sizeof(sConfig)); |
| if (actualLen >= 8) |
| { |
| ALOGD ( "START_UP_CFG[0] = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", |
| sConfig[0], |
| sConfig[1], |
| sConfig[2], |
| sConfig[3], |
| sConfig[4], |
| sConfig[5], |
| sConfig[6], |
| sConfig[7] ); |
| sStartupConfig.append (sConfig, actualLen); |
| } |
| |
| // Set antenna tuning configuration if configured. |
| actualLen = GetStrValue(NAME_PREINIT_DSP_CFG, (char*)sConfig, sizeof(sConfig)); |
| if (actualLen) |
| sStartupConfig.append (sConfig, actualLen); |
| |
| if ( GetStrValue ( NAME_NFA_DM_START_UP_VSC_CFG, (char*)nfa_dm_start_up_vsc_cfg, sizeof (nfa_dm_start_up_vsc_cfg) ) ) |
| { |
| p_nfc_hal_dm_start_up_vsc_cfg = &nfa_dm_start_up_vsc_cfg[0]; |
| ALOGD ( "START_UP_VSC_CFG[0] = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", |
| nfa_dm_start_up_vsc_cfg[0], |
| nfa_dm_start_up_vsc_cfg[1], |
| nfa_dm_start_up_vsc_cfg[2], |
| nfa_dm_start_up_vsc_cfg[3], |
| nfa_dm_start_up_vsc_cfg[4], |
| nfa_dm_start_up_vsc_cfg[5], |
| nfa_dm_start_up_vsc_cfg[6], |
| nfa_dm_start_up_vsc_cfg[7] ); |
| } |
| |
| actualLen = GetStrValue(NAME_LPTD_CFG, (char*)sConfig, sizeof(sConfig)); |
| if (actualLen) |
| { |
| sLptdConfig.append (sConfig, actualLen); |
| p_nfc_hal_dm_lptd_cfg = const_cast<UINT8*> (sLptdConfig.getInternalBuffer ()); |
| } |
| |
| mayDisableSecureElement (sStartupConfig); |
| p_nfc_hal_dm_start_up_cfg = const_cast<UINT8*> (sStartupConfig.getInternalBuffer ()); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function StartPatchDownload |
| ** |
| ** Description Reads configuration settings, and begins the download |
| ** process if patch files are configured. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void StartPatchDownload(UINT32 chipid) |
| { |
| ALOGD ("%s: chipid=%lx",__FUNCTION__, chipid); |
| |
| char chipID[30]; |
| sprintf(chipID, "%lx", chipid); |
| ALOGD ("%s: chidId=%s", __FUNCTION__, chipID); |
| |
| readOptionalConfig(chipID); // Read optional chip specific settings |
| readOptionalConfig("fime"); // Read optional FIME specific settings |
| getNfaValues(); // Get NFA configuration values into variables |
| |
| |
| findPatchramFile(FW_PATCH, sPatchFn, sizeof(sPatchFn)); |
| findPatchramFile(FW_PRE_PATCH, sPrePatchFn, sizeof(sPatchFn)); |
| |
| { |
| FILE *fd; |
| /* If an I2C fix patch file was specified, then tell the stack about it */ |
| if (sPrePatchFn[0] != '\0') |
| { |
| if ((fd = fopen(sPrePatchFn, "rb")) != NULL) |
| { |
| UINT32 lenPrmBuffer = getFileLength(fd); |
| |
| if ((sI2cFixPrmBuf = malloc(lenPrmBuffer)) != NULL) |
| { |
| fread(sI2cFixPrmBuf, lenPrmBuffer, 1, fd); |
| |
| ALOGD("%s Setting I2C fix to %s (size: %lu)", __FUNCTION__, sPrePatchFn, lenPrmBuffer); |
| HAL_NfcPrmSetI2cPatch((UINT8*)sI2cFixPrmBuf, (UINT16)lenPrmBuffer, 0); |
| } |
| else |
| { |
| ALOGE("%s Unable to get buffer to i2c fix (%lu bytes)", __FUNCTION__, lenPrmBuffer); |
| } |
| |
| fclose(fd); |
| } |
| else |
| { |
| ALOGE("%s Unable to open i2c fix patchfile %s", __FUNCTION__, sPrePatchFn); |
| } |
| } |
| } |
| |
| { |
| FILE *fd; |
| |
| /* If a patch file was specified, then download it now */ |
| if (sPatchFn[0] != '\0') |
| { |
| UINT32 bDownloadStarted = false; |
| |
| /* open patchfile, read it into a buffer */ |
| if ((fd = fopen(sPatchFn, "rb")) != NULL) |
| { |
| UINT32 lenPrmBuffer = getFileLength(fd); |
| ALOGD("%s Downloading patchfile %s (size: %lu) format=%u", __FUNCTION__, sPatchFn, lenPrmBuffer, NFC_HAL_PRM_FORMAT_NCD); |
| if ((sPrmBuf = malloc(lenPrmBuffer)) != NULL) |
| { |
| fread(sPrmBuf, lenPrmBuffer, 1, fd); |
| |
| if (!SpdHelper::isPatchBad((UINT8*)sPrmBuf, lenPrmBuffer)) |
| { |
| /* Download patch using static memeory mode */ |
| HAL_NfcPrmDownloadStart(NFC_HAL_PRM_FORMAT_NCD, 0, (UINT8*)sPrmBuf, lenPrmBuffer, 0, prmCallback); |
| bDownloadStarted = true; |
| } |
| } |
| else |
| ALOGE("%s Unable to buffer to hold patchram (%lu bytes)", __FUNCTION__, lenPrmBuffer); |
| |
| fclose(fd); |
| } |
| else |
| ALOGE("%s Unable to open patchfile %s", __FUNCTION__, sPatchFn); |
| |
| /* If the download never got started */ |
| if (!bDownloadStarted) |
| { |
| /* If debug mode, fail in an obvious way, otherwise try to start stack */ |
| postDownloadPatchram(SpdHelper::isSpdDebug() ? HAL_NFC_STATUS_FAILED : |
| HAL_NFC_STATUS_OK); |
| } |
| } |
| else |
| { |
| ALOGE("%s: No patchfile specified or disabled. Proceeding to post-download procedure...", __FUNCTION__); |
| postDownloadPatchram(HAL_NFC_STATUS_OK); |
| } |
| } |
| |
| ALOGD ("%s: exit", __FUNCTION__); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfc_hal_post_reset_init |
| ** |
| ** Description: Called by the NFC HAL after controller has been reset. |
| ** Begin to download firmware patch files. |
| ** |
| ** Returns: none |
| ** |
| *******************************************************************************/ |
| void nfc_hal_post_reset_init (UINT32 brcm_hw_id, UINT8 nvm_type) |
| { |
| ALOGD("%s: brcm_hw_id=0x%lx, nvm_type=%d", __FUNCTION__, brcm_hw_id, nvm_type); |
| tHAL_NFC_STATUS stat = HAL_NFC_STATUS_FAILED; |
| UINT8 max_credits = 1; |
| |
| if (nvm_type == NCI_SPD_NVM_TYPE_NONE) |
| { |
| ALOGD("%s: No NVM detected, FAIL the init stage to force a retry", __FUNCTION__); |
| USERIAL_PowerupDevice (0); |
| stat = HAL_NfcReInit (); |
| } |
| else |
| { |
| /* Start downloading the patch files */ |
| StartPatchDownload(brcm_hw_id); |
| |
| if (GetNumValue(MAX_RF_DATA_CREDITS, &max_credits, sizeof(max_credits)) && (max_credits > 0)) |
| { |
| ALOGD("%s : max_credits=%d", __FUNCTION__, max_credits); |
| HAL_NfcSetMaxRfDataCredits(max_credits); |
| } |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: mayDisableSecureElement |
| ** |
| ** Description: Optionally adjust a TLV to disable secure element. This feature |
| ** is enabled by setting the system property |
| ** nfc.disable_secure_element to a bit mask represented by a hex |
| ** octet: C0 = do not detect any secure element. |
| ** 40 = do not detect secure element in slot 0. |
| ** 80 = do not detect secure element in slot 1. |
| ** |
| ** config: a sequence of TLV's. |
| ** |
| *******************************************************************************/ |
| void mayDisableSecureElement (StartupConfig& config) |
| { |
| unsigned int bitmask = 0; |
| char valueStr [PROPERTY_VALUE_MAX] = {0}; |
| int len = property_get ("nfc.disable_secure_element", valueStr, ""); |
| if (len > 0) |
| { |
| sscanf (valueStr, "%x", &bitmask); //read system property as a hex octet |
| ALOGD ("%s: disable 0x%02X", __FUNCTION__, (UINT8) bitmask); |
| config.disableSecureElement ((UINT8) (bitmask & 0xC0)); |
| } |
| } |
