| /****************************************************************************** |
| * |
| * Copyright (C) 2010-2013 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| |
| /****************************************************************************** |
| * |
| * NFA interface to NFCEE - API functions |
| * |
| ******************************************************************************/ |
| #include <string.h> |
| #include "nfa_ee_api.h" |
| #include "nfa_ee_int.h" |
| #include "nfa_sys_int.h" |
| #include "nfa_dm_int.h" |
| |
| /***************************************************************************** |
| ** APIs |
| *****************************************************************************/ |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeDiscover |
| ** |
| ** Description This function retrieves the NFCEE information from NFCC. |
| ** The NFCEE information is reported in NFA_EE_DISCOVER_EVT. |
| ** |
| ** This function may be called when a system supports removable |
| ** NFCEEs, |
| ** |
| ** Returns NFA_STATUS_OK if information is retrieved successfully |
| ** NFA_STATUS_FAILED If wrong state (retry later) |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeDiscover(tNFA_EE_CBACK *p_cback) |
| { |
| tNFA_EE_API_DISCOVER *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| |
| NFA_TRACE_API0 ("NFA_EeDiscover()"); |
| |
| if (nfa_ee_cb.em_state != NFA_EE_EM_STATE_INIT_DONE) |
| { |
| NFA_TRACE_ERROR1 ("NFA_EeDiscover bad em state: %d", nfa_ee_cb.em_state); |
| status = NFA_STATUS_FAILED; |
| } |
| else if ((nfa_ee_cb.p_ee_disc_cback != NULL) || (p_cback == NULL)) |
| { |
| NFA_TRACE_ERROR0 ("NFA_EeDiscover() in progress or NULL callback function"); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_DISCOVER *) GKI_getbuf (sizeof(tNFA_EE_API_DISCOVER))) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_DISCOVER_EVT; |
| p_msg->p_cback = p_cback; |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeGetInfo |
| ** |
| ** Description This function retrieves the NFCEE information from NFA. |
| ** The actual number of NFCEE is returned in p_num_nfcee |
| ** and NFCEE information is returned in p_info |
| ** |
| ** Returns NFA_STATUS_OK if information is retrieved successfully |
| ** NFA_STATUS_FAILED If wrong state (retry later) |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeGetInfo(UINT8 *p_num_nfcee, |
| tNFA_EE_INFO *p_info) |
| { |
| int xx, ret = nfa_ee_cb.cur_ee; |
| tNFA_EE_ECB *p_cb = nfa_ee_cb.ecb; |
| UINT8 max_ret; |
| UINT8 num_ret = 0; |
| |
| NFA_TRACE_DEBUG2 ("NFA_EeGetInfo em_state:%d cur_ee:%d", nfa_ee_cb.em_state, nfa_ee_cb.cur_ee); |
| /* validate parameters */ |
| if (p_info == NULL || p_num_nfcee == NULL) |
| { |
| NFA_TRACE_ERROR0 ("NFA_EeGetInfo bad parameter"); |
| return (NFA_STATUS_INVALID_PARAM); |
| } |
| max_ret = *p_num_nfcee; |
| *p_num_nfcee = 0; |
| if (nfa_ee_cb.em_state == NFA_EE_EM_STATE_INIT) |
| { |
| NFA_TRACE_ERROR1 ("NFA_EeGetInfo bad em state: %d", nfa_ee_cb.em_state); |
| return (NFA_STATUS_FAILED); |
| } |
| |
| /* compose output */ |
| for (xx = 0; (xx < ret) && (num_ret < max_ret); xx++, p_cb++) |
| { |
| NFA_TRACE_DEBUG4 ("xx:%d max_ret:%d, num_ret:%d ee_status:0x%x", xx, max_ret, num_ret, p_cb->ee_status); |
| if ((p_cb->ee_status & NFA_EE_STATUS_INT_MASK) || (p_cb->ee_status == NFA_EE_STATUS_REMOVED)) |
| { |
| continue; |
| } |
| p_info->ee_handle = NFA_HANDLE_GROUP_EE | (tNFA_HANDLE)p_cb->nfcee_id; |
| p_info->ee_status = p_cb->ee_status; |
| p_info->num_interface = p_cb->num_interface; |
| p_info->num_tlvs = p_cb->num_tlvs; |
| memcpy(p_info->ee_interface, p_cb->ee_interface, p_cb->num_interface); |
| memcpy(p_info->ee_tlv, p_cb->ee_tlv, p_cb->num_tlvs * sizeof(tNFA_EE_TLV)); |
| p_info++; |
| num_ret++; |
| } |
| NFA_TRACE_DEBUG1 ("num_ret:%d", num_ret); |
| *p_num_nfcee = num_ret; |
| return (NFA_STATUS_OK); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeRegister |
| ** |
| ** Description This function registers a callback function to receive the |
| ** events from NFA-EE module. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeRegister(tNFA_EE_CBACK *p_cback) |
| { |
| tNFA_EE_API_REGISTER *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| |
| NFA_TRACE_API0 ("NFA_EeRegister()"); |
| |
| if (p_cback == NULL) |
| { |
| NFA_TRACE_ERROR0 ("NFA_EeRegister(): with NULL callback function"); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_REGISTER *) GKI_getbuf (sizeof(tNFA_EE_API_REGISTER))) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_REGISTER_EVT; |
| p_msg->p_cback = p_cback; |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeDeregister |
| ** |
| ** Description This function de-registers the callback function |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeDeregister(tNFA_EE_CBACK *p_cback) |
| { |
| tNFA_EE_API_DEREGISTER *p_msg; |
| tNFA_STATUS status = NFA_STATUS_INVALID_PARAM; |
| int index = NFA_EE_MAX_CBACKS; |
| int xx; |
| |
| for (xx = 0; xx < NFA_EE_MAX_CBACKS; xx++) |
| { |
| if (nfa_ee_cb.p_ee_cback[xx] == p_cback) |
| { |
| index = xx; |
| status = NFA_STATUS_FAILED; |
| break; |
| } |
| } |
| |
| NFA_TRACE_API2 ("NFA_EeDeregister() %d, status:%d", index, status); |
| if ((status != NFA_STATUS_INVALID_PARAM) && |
| (p_msg = (tNFA_EE_API_DEREGISTER *) GKI_getbuf (sizeof(tNFA_EE_API_DEREGISTER))) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_DEREGISTER_EVT; |
| p_msg->index = index; |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeModeSet |
| ** |
| ** Description This function is called to activate (mode = NFA_EE_MD_ACTIVATE) |
| ** or deactivate (mode = NFA_EE_MD_DEACTIVATE) the NFCEE |
| ** identified by the given ee_handle. The result of this |
| ** operation is reported with the NFA_EE_MODE_SET_EVT. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeModeSet(tNFA_HANDLE ee_handle, |
| tNFA_EE_MD mode) |
| { |
| tNFA_EE_API_MODE_SET *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| tNFA_EE_ECB *p_cb, *p_found = NULL; |
| UINT32 xx; |
| UINT8 nfcee_id = (ee_handle & 0xFF); |
| |
| p_cb = nfa_ee_cb.ecb; |
| for (xx = 0; xx < nfa_ee_cb.cur_ee; xx++, p_cb++) |
| { |
| if (nfcee_id == p_cb->nfcee_id) |
| { |
| p_found = p_cb; |
| break; |
| } |
| } |
| NFA_TRACE_API2 ("NFA_EeModeSet(): handle:<0x%x>, mode:0x%02X", ee_handle, mode); |
| |
| if (p_found == NULL) |
| { |
| NFA_TRACE_ERROR1 ("NFA_EeModeSet() invalid NFCEE:0x%04x", ee_handle); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_MODE_SET *) GKI_getbuf (sizeof(tNFA_EE_API_MODE_SET))) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_MODE_SET_EVT; |
| p_msg->nfcee_id = nfcee_id; |
| p_msg->mode = mode; |
| p_msg->p_cb = p_found; |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeSetDefaultTechRouting |
| ** |
| ** Description This function is called to add, change or remove the |
| ** default routing based on RF technology in the listen mode |
| ** routing table for the given ee_handle. The status of this |
| ** operation is reported as the NFA_EE_SET_TECH_CFG_EVT. |
| ** |
| ** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT |
| ** should happen before calling this function |
| ** |
| ** Note: NFA_EeUpdateNow() should be called after last NFA-EE function |
| ** to change the listen mode routing is called. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeSetDefaultTechRouting(tNFA_HANDLE ee_handle, |
| tNFA_TECHNOLOGY_MASK technologies_switch_on, |
| tNFA_TECHNOLOGY_MASK technologies_switch_off, |
| tNFA_TECHNOLOGY_MASK technologies_battery_off) |
| { |
| tNFA_EE_API_SET_TECH_CFG *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| UINT8 nfcee_id = (UINT8)(ee_handle & 0xFF); |
| tNFA_EE_ECB *p_cb; |
| |
| NFA_TRACE_API4 ("NFA_EeSetDefaultTechRouting(): handle:<0x%x>technology_mask:<0x%x>/<0x%x>/<0x%x>", |
| ee_handle, technologies_switch_on, technologies_switch_off, technologies_battery_off); |
| p_cb = nfa_ee_find_ecb (nfcee_id); |
| |
| if (p_cb == NULL) |
| { |
| NFA_TRACE_ERROR0 ("Bad ee_handle"); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_SET_TECH_CFG *) GKI_getbuf (sizeof(tNFA_EE_API_SET_TECH_CFG))) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_SET_TECH_CFG_EVT; |
| p_msg->nfcee_id = nfcee_id; |
| p_msg->p_cb = p_cb; |
| p_msg->technologies_switch_on = technologies_switch_on; |
| p_msg->technologies_switch_off = technologies_switch_off; |
| p_msg->technologies_battery_off = technologies_battery_off; |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeSetDefaultProtoRouting |
| ** |
| ** Description This function is called to add, change or remove the |
| ** default routing based on Protocol in the listen mode routing |
| ** table for the given ee_handle. The status of this |
| ** operation is reported as the NFA_EE_SET_PROTO_CFG_EVT. |
| ** |
| ** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT |
| ** should happen before calling this function |
| ** |
| ** Note: NFA_EeUpdateNow() should be called after last NFA-EE function |
| ** to change the listen mode routing is called. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeSetDefaultProtoRouting(tNFA_HANDLE ee_handle, |
| tNFA_PROTOCOL_MASK protocols_switch_on, |
| tNFA_PROTOCOL_MASK protocols_switch_off, |
| tNFA_PROTOCOL_MASK protocols_battery_off) |
| { |
| tNFA_EE_API_SET_PROTO_CFG *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| UINT8 nfcee_id = (UINT8)(ee_handle & 0xFF); |
| tNFA_EE_ECB *p_cb; |
| |
| NFA_TRACE_API4 ("NFA_EeSetDefaultProtoRouting(): handle:<0x%x>protocol_mask:<0x%x>/<0x%x>/<0x%x>", |
| ee_handle, protocols_switch_on, protocols_switch_off, protocols_battery_off); |
| p_cb = nfa_ee_find_ecb (nfcee_id); |
| |
| if (p_cb == NULL) |
| { |
| NFA_TRACE_ERROR0 ("Bad ee_handle"); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_SET_PROTO_CFG *) GKI_getbuf (sizeof(tNFA_EE_API_SET_PROTO_CFG))) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_SET_PROTO_CFG_EVT; |
| p_msg->nfcee_id = nfcee_id; |
| p_msg->p_cb = p_cb; |
| p_msg->protocols_switch_on = protocols_switch_on; |
| p_msg->protocols_switch_off = protocols_switch_off; |
| p_msg->protocols_battery_off = protocols_battery_off; |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeAddAidRouting |
| ** |
| ** Description This function is called to add an AID entry in the |
| ** listen mode routing table in NFCC. The status of this |
| ** operation is reported as the NFA_EE_ADD_AID_EVT. |
| ** |
| ** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT |
| ** should happen before calling this function |
| ** |
| ** Note: NFA_EeUpdateNow() should be called after last NFA-EE function |
| ** to change the listen mode routing is called. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeAddAidRouting(tNFA_HANDLE ee_handle, |
| UINT8 aid_len, |
| UINT8 *p_aid, |
| tNFA_EE_PWR_STATE power_state) |
| { |
| tNFA_EE_API_ADD_AID *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| UINT16 size = sizeof(tNFA_EE_API_ADD_AID) + aid_len; |
| UINT8 nfcee_id = (UINT8)(ee_handle & 0xFF); |
| tNFA_EE_ECB *p_cb; |
| |
| NFA_TRACE_API1 ("NFA_EeAddAidRouting(): handle:<0x%x>", ee_handle); |
| p_cb = nfa_ee_find_ecb (nfcee_id); |
| |
| /* validate parameters - make sure the AID is in valid length range */ |
| if ((p_cb == NULL) || (aid_len == 0) || (p_aid == NULL) || (aid_len < NFA_MIN_AID_LEN) || (aid_len > NFA_MAX_AID_LEN)) |
| { |
| NFA_TRACE_ERROR1 ("Bad ee_handle or AID (len=%d)", aid_len); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_ADD_AID *) GKI_getbuf (size)) != NULL) |
| { |
| NFA_TRACE_DEBUG2 ("aid:<%02x%02x>", p_aid[0], p_aid[1]); |
| p_msg->hdr.event = NFA_EE_API_ADD_AID_EVT; |
| p_msg->nfcee_id = nfcee_id; |
| p_msg->p_cb = p_cb; |
| p_msg->aid_len = aid_len; |
| p_msg->power_state = power_state; |
| p_msg->p_aid = (UINT8 *)(p_msg + 1); |
| memcpy(p_msg->p_aid, p_aid, aid_len); |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeRemoveAidRouting |
| ** |
| ** Description This function is called to remove the given AID entry from the |
| ** listen mode routing table. If the entry configures VS, |
| ** it is also removed. The status of this operation is reported |
| ** as the NFA_EE_REMOVE_AID_EVT. |
| ** |
| ** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT |
| ** should happen before calling this function |
| ** |
| ** Note: NFA_EeUpdateNow() should be called after last NFA-EE function |
| ** to change the listen mode routing is called. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeRemoveAidRouting(UINT8 aid_len, |
| UINT8 *p_aid) |
| { |
| tNFA_EE_API_REMOVE_AID *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| UINT16 size = sizeof(tNFA_EE_API_REMOVE_AID) + aid_len; |
| |
| NFA_TRACE_API0 ("NFA_EeRemoveAidRouting()"); |
| if ((aid_len == 0) || (p_aid == NULL) || (aid_len > NFA_MAX_AID_LEN)) |
| { |
| NFA_TRACE_ERROR0 ("Bad AID"); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_REMOVE_AID *) GKI_getbuf (size)) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_REMOVE_AID_EVT; |
| p_msg->aid_len = aid_len; |
| p_msg->p_aid = (UINT8 *)(p_msg + 1); |
| memcpy(p_msg->p_aid, p_aid, aid_len); |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeUpdateNow |
| ** |
| ** Description This function is called to send the current listen mode |
| ** routing table and VS configuration to the NFCC (without waiting |
| ** for NFA_EE_ROUT_TIMEOUT_VAL). |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeUpdateNow(void) |
| { |
| BT_HDR *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| |
| NFA_TRACE_API0 ("NFA_EeUpdateNow()"); |
| if ((p_msg = (BT_HDR *) GKI_getbuf (BT_HDR_SIZE)) != NULL) |
| { |
| p_msg->event = NFA_EE_API_UPDATE_NOW_EVT; |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeConnect |
| ** |
| ** Description Open connection to an NFCEE attached to the NFCC |
| ** |
| ** The status of this operation is |
| ** reported with the NFA_EE_CONNECT_EVT. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeConnect(tNFA_HANDLE ee_handle, |
| UINT8 ee_interface, |
| tNFA_EE_CBACK *p_cback) |
| { |
| tNFA_EE_API_CONNECT *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| UINT8 nfcee_id = (UINT8)(ee_handle & 0xFF); |
| tNFA_EE_ECB *p_cb; |
| |
| NFA_TRACE_API2 ("NFA_EeConnect(): handle:<0x%x> ee_interface:0x%x", ee_handle, ee_interface); |
| p_cb = nfa_ee_find_ecb (nfcee_id); |
| |
| if ((p_cb == NULL) || (p_cback == NULL)) |
| { |
| NFA_TRACE_ERROR0 ("Bad ee_handle or NULL callback function"); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_CONNECT *) GKI_getbuf (sizeof(tNFA_EE_API_CONNECT))) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_CONNECT_EVT; |
| p_msg->nfcee_id = nfcee_id; |
| p_msg->p_cb = p_cb; |
| p_msg->ee_interface = ee_interface; |
| p_msg->p_cback = p_cback; |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeSendData |
| ** |
| ** Description Send data to the given NFCEE. |
| ** This function shall be called after NFA_EE_CONNECT_EVT is reported |
| ** and before NFA_EeDisconnect is called on the given ee_handle. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeSendData (tNFA_HANDLE ee_handle, |
| UINT16 data_len, |
| UINT8 *p_data) |
| { |
| tNFA_EE_API_SEND_DATA *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| UINT8 nfcee_id = (UINT8)(ee_handle & 0xFF); |
| tNFA_EE_ECB *p_cb; |
| |
| NFA_TRACE_API1 ("NFA_EeSendData(): handle:<0x%x>", ee_handle); |
| |
| p_cb = nfa_ee_find_ecb (nfcee_id); |
| |
| if ((p_cb == NULL) || (p_cb->conn_st != NFA_EE_CONN_ST_CONN) || (p_data == NULL)) |
| { |
| NFA_TRACE_ERROR0 ("Bad ee_handle or NULL data"); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_SEND_DATA *) GKI_getbuf ((UINT16)(sizeof(tNFA_EE_API_SEND_DATA) + data_len))) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_SEND_DATA_EVT; |
| p_msg->nfcee_id = nfcee_id; |
| p_msg->p_cb = p_cb; |
| p_msg->data_len = data_len; |
| p_msg->p_data = (UINT8 *)(p_msg + 1); |
| memcpy(p_msg->p_data, p_data, data_len); |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_EeDisconnect |
| ** |
| ** Description Disconnect (if a connection is currently open) from an |
| ** NFCEE interface. The result of this operation is reported |
| ** with the NFA_EE_DISCONNECT_EVT. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** NFA_STATUS_INVALID_PARAM If bad parameter |
| ** |
| *******************************************************************************/ |
| tNFA_STATUS NFA_EeDisconnect(tNFA_HANDLE ee_handle) |
| { |
| tNFA_EE_API_DISCONNECT *p_msg; |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| UINT8 nfcee_id = (UINT8)(ee_handle & 0xFF); |
| tNFA_EE_ECB *p_cb; |
| |
| NFA_TRACE_API1 ("NFA_EeDisconnect(): handle:<0x%x>", ee_handle); |
| p_cb = nfa_ee_find_ecb (nfcee_id); |
| |
| if ((p_cb == NULL) || (p_cb->conn_st != NFA_EE_CONN_ST_CONN)) |
| { |
| NFA_TRACE_ERROR0 ("NFA_EeDisconnect() Bad ee_handle"); |
| status = NFA_STATUS_INVALID_PARAM; |
| } |
| else if ((p_msg = (tNFA_EE_API_DISCONNECT *) GKI_getbuf (sizeof(tNFA_EE_API_DISCONNECT))) != NULL) |
| { |
| p_msg->hdr.event = NFA_EE_API_DISCONNECT_EVT; |
| p_msg->nfcee_id = nfcee_id; |
| p_msg->p_cb = p_cb; |
| |
| nfa_sys_sendmsg (p_msg); |
| |
| status = NFA_STATUS_OK; |
| } |
| |
| return status; |
| } |
