| /* |
| * Copyright (C) 2010 NXP Semiconductors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /*! |
| * \file phFriNfcNdefMap.c |
| * \brief NFC Ndef Mapping For Different Smart Cards. |
| * |
| * Project: NFC-FRI |
| * |
| * $Date: Mon Dec 13 14:14:12 2010 $ |
| * $Author: ing02260 $ |
| * $Revision: 1.39 $ |
| * $Aliases: $ |
| * |
| */ |
| |
| |
| #include <phFriNfc_NdefMap.h> |
| |
| #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED |
| #include <phFriNfc_MifareULMap.h> |
| #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ |
| |
| #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED |
| #include <phFriNfc_TopazMap.h> |
| #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED |
| #include <phFriNfc_MifareStdMap.h> |
| #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| #include <phFriNfc_DesfireMap.h> |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| #include <phFriNfc_FelicaMap.h> |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_ISO15693_DISABLED |
| #include <phFriNfc_ISO15693Map.h> |
| #endif /* PH_FRINFC_MAP_ISO15693_DISABLED */ |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| #include <phFriNfc_MockupMap.h> |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| |
| |
| #include <phFriNfc_OvrHal.h> |
| |
| /*! \ingroup grp_file_attributes |
| * \name NDEF Mapping |
| * |
| * File: \ref phFriNfcNdefMap.c |
| * |
| */ |
| /*@{*/ |
| #define PHFRINFCNDEFMAP_FILEREVISION "$Revision: 1.39 $" |
| #define PHFRINFCNDEFMAP_FILEALIASES "$Aliases: $" |
| /*@}*/ |
| |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| /* Desfire capability Container Reset Helper */ |
| static void phFriNfc_DesfCapCont_HReset(phFriNfc_NdefMap_t *NdefMap); |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| /* Felica Smart Tag Reset Helper */ |
| static void phFriNfc_Felica_HReset(phFriNfc_NdefMap_t *NdefMap); |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ |
| |
| |
| /* \note This function has to be called at the beginning, after creating an |
| * instance of \ref phFriNfc_NdefMap_t . Use this function to reset |
| * the instance and/or switch to a different underlying device ( |
| * different NFC device or device mode, or different Remote Device). |
| */ |
| |
| NFCSTATUS phFriNfc_NdefMap_Reset( phFriNfc_NdefMap_t *NdefMap, |
| void *LowerDevice, |
| phHal_sRemoteDevInformation_t *psRemoteDevInfo, |
| phHal_sDevInputParam_t *psDevInputParam, |
| uint8_t *TrxBuffer, |
| uint16_t TrxBufferSize, |
| uint8_t *ReceiveBuffer, |
| uint16_t *ReceiveLength, |
| uint16_t *DataCount) |
| { |
| NFCSTATUS status = NFCSTATUS_SUCCESS; |
| uint8_t index; |
| |
| if ( (ReceiveLength == NULL) || (NdefMap == NULL) || (psRemoteDevInfo == NULL) || |
| (TrxBuffer == NULL) || (TrxBufferSize == 0) || (LowerDevice == NULL) || |
| (*ReceiveLength == 0) || (ReceiveBuffer == NULL) || (DataCount == NULL) || |
| (psDevInputParam == NULL) || |
| (*ReceiveLength < PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE )) |
| { |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); |
| } |
| else |
| { |
| /* Initialise the state to Init */ |
| NdefMap->State = PH_FRINFC_NDEFMAP_STATE_RESET_INIT; |
| |
| for(index = 0;index<PH_FRINFC_NDEFMAP_CR;index++) |
| { |
| /* Initialise the NdefMap Completion Routine to Null */ |
| NdefMap->CompletionRoutine[index].CompletionRoutine = NULL; |
| /* Initialise the NdefMap Completion Routine context to Null */ |
| NdefMap->CompletionRoutine[index].Context = NULL; |
| } |
| |
| /* Lower Device(Always Overlapped HAL Struct initialised in application |
| is registred in NdefMap Lower Device) */ |
| NdefMap->LowerDevice = LowerDevice; |
| |
| /* Remote Device info received from Manual Device Discovery is registered here */ |
| NdefMap->psRemoteDevInfo = psRemoteDevInfo; |
| |
| /* Transfer Buffer registered */ |
| NdefMap->ApduBuffer = TrxBuffer; |
| |
| /* Set the MaxApduBufferSize */ |
| NdefMap->ApduBufferSize = TrxBufferSize; |
| |
| /* Set APDU Buffer Index */ |
| NdefMap->ApduBuffIndex = 0; |
| |
| /* Register Transfer Buffer Length */ |
| NdefMap->SendLength = 0; |
| |
| /* Register Receive Buffer */ |
| NdefMap->SendRecvBuf = ReceiveBuffer; |
| |
| /* Register Receive Buffer Length */ |
| NdefMap->SendRecvLength = ReceiveLength; |
| |
| /* Register Temporary Receive Buffer Length */ |
| NdefMap->TempReceiveLength = *ReceiveLength; |
| |
| /* Register Data Count variable and set it to zero */ |
| NdefMap->DataCount = DataCount; |
| *NdefMap->DataCount = 0; |
| |
| /* Reset the PageOffset */ |
| NdefMap->Offset = 0; |
| |
| /* Reset the NumOfBytesRead*/ |
| NdefMap->NumOfBytesRead = 0; |
| |
| /* Reset the NumOfBytesWritten*/ |
| NdefMap->NumOfBytesWritten = 0; |
| |
| /* Reset the Card Type */ |
| NdefMap->CardType = 0; |
| |
| /* Reset the Memory Card Size*/ |
| NdefMap->CardMemSize = 0; |
| |
| /* Reset the Previous Operation*/ |
| NdefMap->PrevOperation = 0; |
| |
| /* Reset the Desfire Operation Flag*/ |
| NdefMap->DespOpFlag = 0; |
| |
| /* Reset MapCompletion Info*/ |
| NdefMap->MapCompletionInfo.CompletionRoutine = NULL; |
| NdefMap->MapCompletionInfo.Context = NULL; |
| |
| /* Reset the ReadingForWriteOperation flag. */ |
| NdefMap->ReadingForWriteOperation = 0; /* FALSE */ |
| |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| /*Reset Desfire Cap Container elements*/ |
| phFriNfc_DesfCapCont_HReset(NdefMap); |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED |
| /*Reset Mifare Standard Container elements*/ |
| NdefMap->StdMifareContainer.DevInputParam = psDevInputParam; |
| status = phFriNfc_MifareStdMap_H_Reset(NdefMap); |
| #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| /*Reset Felica Tag elements*/ |
| NdefMap->FelicaPollDetails.DevInputParam = psDevInputParam; |
| phFriNfc_Felica_HReset(NdefMap); |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ |
| |
| #if !(defined(PH_FRINFC_MAP_TOPAZ_DISABLED ) || defined (PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED )) |
| |
| phFriNfc_TopazMap_H_Reset(NdefMap); |
| #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED || PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED */ |
| |
| |
| #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED |
| status = phFriNfc_MifareUL_H_Reset(NdefMap); |
| #endif |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| /*Reset Desfire Cap Container elements*/ |
| phFriNfc_Mockup_H_Reset(NdefMap); |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| |
| /* |
| * Fix for PR - 0001256 |
| * Date- 08-08-08 |
| */ |
| NdefMap->CardState = PH_NDEFMAP_CARD_STATE_INVALID; |
| } |
| |
| return (status); |
| } |
| |
| /*! |
| * Registering the Completion Routine. |
| * |
| * This function requires the caller to set a Completion Routine |
| * which serves as notifier for the upper component. |
| * NOTE: Please refer the header file for more information. |
| * |
| */ |
| |
| NFCSTATUS phFriNfc_NdefMap_SetCompletionRoutine(phFriNfc_NdefMap_t *NdefMap, |
| uint8_t FunctionID, |
| pphFriNfc_Cr_t CompletionRoutine, |
| void *CompletionRoutineContext) |
| { |
| NFCSTATUS status = NFCSTATUS_SUCCESS; |
| |
| if ( ( NdefMap == NULL ) || (FunctionID >= PH_FRINFC_NDEFMAP_CR) || |
| ( CompletionRoutine == NULL) || (CompletionRoutineContext == NULL)) |
| { |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); |
| } |
| else |
| { |
| /* Register the application callback with the NdefMap Completion Routine */ |
| NdefMap->CompletionRoutine[FunctionID].CompletionRoutine = CompletionRoutine; |
| |
| /* Register the application context with the NdefMap Completion Routine context */ |
| NdefMap->CompletionRoutine[FunctionID].Context = CompletionRoutineContext; |
| } |
| |
| return status; |
| } |
| |
| /*! |
| * Initiates Reading of NDEF information from the Remote Device. |
| * |
| * Remote Peer device may be of type any card. Ex: desfire,felica,jewel |
| * mifareUL,mifare 1K etc. The function initiates the reading of NDEF |
| * information from a Remote Device. |
| * |
| * This is the main NdefMap read function call.Internally,depending upon |
| * the CardType,respective mifare/desfire read functions are called. |
| * In future this can be extended to support any types of card. |
| * |
| * It performs a reset of the state and triggers/starts the raed action (state machine). |
| * A periodic call of the \ref phFriNfcNdefMap_Process has to be done once the action |
| * has been triggered. |
| * |
| * NOTE: Please refer the header file for more information. |
| * |
| */ |
| |
| NFCSTATUS phFriNfc_NdefMap_RdNdef( phFriNfc_NdefMap_t *NdefMap, |
| uint8_t *PacketData, |
| uint32_t *PacketDataLength, |
| uint8_t Offset) |
| { |
| NFCSTATUS status = NFCSTATUS_PENDING; |
| |
| |
| /* check for validity of input parameters*/ |
| if (( PacketData == NULL ) |
| || ( NdefMap == NULL ) |
| || ( PacketDataLength == NULL ) |
| || ( *PacketDataLength == 0 ) |
| || ( ( Offset != PH_FRINFC_NDEFMAP_SEEK_CUR) && (Offset != PH_FRINFC_NDEFMAP_SEEK_BEGIN )) |
| || (NdefMap->CompletionRoutine->CompletionRoutine == NULL) |
| || (NdefMap->CompletionRoutine->Context == NULL ) |
| ) |
| { |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); |
| } |
| else if (NdefMap->CardState == PH_NDEFMAP_CARD_STATE_INVALID) |
| { |
| /* Card is in invalid state, cannot have any read/write |
| operations*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ |
| NFCSTATUS_INVALID_FORMAT); |
| } |
| else if(NdefMap->CardState == PH_NDEFMAP_CARD_STATE_INITIALIZED) |
| { |
| /* Can't read any data from the card:TLV length is zero*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_EOF_NDEF_CONTAINER_REACHED); |
| |
| NdefMap->NumOfBytesRead = PacketDataLength; |
| *NdefMap->NumOfBytesRead = 0; |
| |
| |
| } |
| else if ( (NdefMap->PrevOperation == PH_FRINFC_NDEFMAP_WRITE_OPE) && (Offset != PH_FRINFC_NDEFMAP_SEEK_BEGIN )) |
| { |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_DEVICE_REQUEST); |
| } |
| else |
| { |
| /* Check the offset given by the user |
| If the offset is 1 (SEEK_BEGIN), reset everything and start |
| reading from the first Page of the card. |
| else if offset is 0 (PH_FRINFC_NDEFMAP_SEEK_CUR), continue reading |
| No need to reset the parameters. */ |
| |
| if ( Offset == PH_FRINFC_NDEFMAP_SEEK_BEGIN ) |
| { |
| NdefMap->ApduBuffIndex = 0; |
| *NdefMap->DataCount = 0; |
| } |
| |
| if ( (NdefMap->CardType == PH_FRINFC_NDEFMAP_ISO14443_4A_CARD) && |
| (Offset == PH_FRINFC_NDEFMAP_SEEK_CUR) && (*NdefMap->DataCount == 0 )) |
| { |
| |
| /* A READ operation cannot be done if the previuos operation was WRITE |
| unless the offset is set to PH_FRINFC_NDEFMAP_SEEK_BEGIN Or |
| Read Operation with Offset set to Continue & DataCount set to 0 */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_DEVICE_REQUEST); |
| } |
| else |
| { |
| switch ( NdefMap->CardType) |
| { |
| #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED |
| case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : |
| /* Mifare card selected. Call Mifare read */ |
| status = phFriNfc_MifareUL_RdNdef ( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : |
| #ifdef DESFIRE_EV1 |
| case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 : |
| #endif /* #ifdef DESFIRE_EV1 */ |
| /* Desfire card selected. Call Desfire read */ |
| status = phFriNfc_Desfire_RdNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : |
| /* Mifare card selected. Call Mifare read */ |
| status = phFriNfc_MifareStdMap_RdNdef ( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : |
| /* Desfire card selected. Call Desfire Write */ |
| status = phFriNfc_Felica_RdNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED |
| case PH_FRINFC_NDEFMAP_TOPAZ_CARD : |
| /* Topaz card selected. Call Topaz read */ |
| status = phFriNfc_TopazMap_RdNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED |
| case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD : |
| /* Topaz card selected. Call Topaz read */ |
| status = phFriNfc_TopazDynamicMap_RdNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED */ |
| #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_ISO15693_DISABLED |
| case PH_FRINFC_NDEFMAP_ISO15693_CARD: |
| status = phFriNfc_ISO15693_RdNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| case PH_FRINFC_NDEFMAP_MOCKUP_CARD : |
| /* Mockup card selected. Call Mockup Write */ |
| status = phFriNfc_Mockup_RdNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| |
| default : |
| /* Unknown card type. Return error */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| |
| break; |
| } |
| } |
| } |
| return status; |
| } |
| |
| /*! |
| * Initiates Writing of NDEF information to the Remote Device. |
| * |
| * The function initiates the writing of NDEF information to a Remote Device |
| * |
| * Remote Peer device may be of type any card. Ex: desfire,felica,jewel |
| * mifareUL,mifare 1K etc. The function initiates the reading of NDEF |
| * information from a Remote Device. |
| * |
| * This is a main write api.Internally,depending upon the CardType, |
| * respective mifare/desfire write apis are called.In future this can be |
| * extended to support any types of card. |
| * |
| * It performs a reset of the state and starts the action (state machine). |
| * A periodic call of the \ref phFriNfcNdefMap_Process has to be done once |
| * the action has been triggered. |
| * |
| * NOTE: Please refer the header file for more information. |
| * |
| */ |
| |
| |
| NFCSTATUS phFriNfc_NdefMap_WrNdef( phFriNfc_NdefMap_t *NdefMap, |
| uint8_t *PacketData, |
| uint32_t *PacketDataLength, |
| uint8_t Offset) |
| { |
| NFCSTATUS status = NFCSTATUS_PENDING; |
| uint8_t StatusChk=0; |
| |
| if ( (PacketData == NULL) |
| || ( NdefMap == NULL ) |
| /* + Mantis 442 */ |
| || ( PacketDataLength == NULL ) |
| /* - Mantis 442 */ |
| || ( *PacketDataLength == 0 ) |
| || ((Offset != PH_FRINFC_NDEFMAP_SEEK_CUR) && (Offset != PH_FRINFC_NDEFMAP_SEEK_BEGIN )) |
| || (NdefMap->CompletionRoutine->CompletionRoutine == NULL) |
| || (NdefMap->CompletionRoutine->Context == NULL) |
| ) |
| { |
| /* Invalid input parameter error */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,NFCSTATUS_INVALID_PARAMETER); |
| } |
| else if (( NdefMap->CardState == PH_NDEFMAP_CARD_STATE_INVALID) && |
| (PH_FRINFC_NDEFMAP_TOPAZ_CARD != NdefMap->CardType) && |
| (PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD != NdefMap->CardType)) |
| { |
| /* Card is in invalid state, cannot have any read/write |
| operations*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ |
| NFCSTATUS_INVALID_FORMAT); |
| } |
| |
| else if ( NdefMap->CardState == PH_NDEFMAP_CARD_STATE_READ_ONLY ) |
| |
| { |
| /*Can't write to the card :No Grants */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ |
| NFCSTATUS_NOT_ALLOWED); |
| |
| /* set the no. bytes written is zero*/ |
| NdefMap->WrNdefPacketLength = PacketDataLength; |
| *NdefMap->WrNdefPacketLength = 0; |
| |
| } |
| else |
| { |
| /* Check the offset given by the user |
| If the offset is 1 (SEEK_BEGIN), reset everything and start |
| writing from the first Byte of the card. |
| else if offset is 0 (PH_FRINFC_NDEFMAP_SEEK_CUR), continue writing |
| No need to reset the parameters. */ |
| if (( NdefMap->CardState == PH_NDEFMAP_CARD_STATE_INVALID) && |
| (PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD == NdefMap->CardType)) |
| { |
| /* If Topaz Dynamic card CC bytes are not valid then also allow writing, |
| If card is really good then writing will be done properly and reading can be performed, |
| otherwise writing or reading will fail. so, setting card state to |
| NdefMap->CardState = PH_NDEFMAP_CARD_STATE_READ_WRITE */ |
| NdefMap->CardState = PH_NDEFMAP_CARD_STATE_READ_WRITE; |
| } |
| |
| if ( Offset == PH_FRINFC_NDEFMAP_SEEK_BEGIN ) |
| { |
| NdefMap->ApduBuffIndex = 0; |
| *NdefMap->DataCount = 0; |
| } |
| |
| if ( (NdefMap->CardType == PH_FRINFC_NDEFMAP_MIFARE_UL_CARD) || |
| (NdefMap->CardType == PH_FRINFC_NDEFMAP_ISO14443_4A_CARD)) |
| { |
| if (( (NdefMap->PrevOperation == PH_FRINFC_NDEFMAP_READ_OPE) && (Offset != PH_FRINFC_NDEFMAP_SEEK_BEGIN )) || |
| ( (Offset == PH_FRINFC_NDEFMAP_SEEK_CUR) && (*NdefMap->DataCount == 0 ))) |
| { |
| /* A WRITE operation cannot be done if the previuos operation was READ |
| unless the offset is set to PH_FRINFC_NDEFMAP_SEEK_BEGIN OR |
| Write Operation with Offset set to Continue & DataCount set to 0 */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_DEVICE_REQUEST); |
| StatusChk = 1; |
| } |
| } |
| if(StatusChk != 1) |
| { |
| NdefMap->WrNdefPacketLength = PacketDataLength; |
| switch ( NdefMap->CardType) |
| { |
| #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED |
| case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : |
| /* Mifare card selected. Call Mifare Write */ |
| status = phFriNfc_MifareUL_WrNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : |
| #ifdef DESFIRE_EV1 |
| case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 : |
| #endif /* #ifdef DESFIRE_EV1 */ |
| /* Desfire card selected. Call Desfire Write */ |
| status = phFriNfc_Desfire_WrNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : |
| /* Mifare card selected. Call Mifare read */ |
| status = phFriNfc_MifareStdMap_WrNdef ( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : |
| /* Desfire card selected. Call Desfire Write */ |
| status = phFriNfc_Felica_WrNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED |
| case PH_FRINFC_NDEFMAP_TOPAZ_CARD : |
| /* Topaz card selected. Call Topaz Write */ |
| status = phFriNfc_TopazMap_WrNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED |
| case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD : |
| /* Topaz card selected. Call Topaz Write */ |
| status = phFriNfc_TopazDynamicMap_WrNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED */ |
| #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_ISO15693_DISABLED |
| case PH_FRINFC_NDEFMAP_ISO15693_CARD: |
| status = phFriNfc_ISO15693_WrNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ |
| |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| case PH_FRINFC_NDEFMAP_MOCKUP_CARD : |
| /* Mockup card selected. Call Mockup Write */ |
| status = phFriNfc_Mockup_WrNdef( NdefMap, |
| PacketData, |
| PacketDataLength, |
| Offset); |
| break; |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| default : |
| /* Unknown card type. Return error */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| break; |
| } |
| } |
| } |
| return status; |
| } |
| |
| #ifdef FRINFC_READONLY_NDEF |
| |
| NFCSTATUS |
| phFriNfc_NdefMap_ConvertToReadOnly ( |
| phFriNfc_NdefMap_t *NdefMap) |
| { |
| NFCSTATUS result = NFCSTATUS_PENDING; |
| |
| |
| /* Check for ndefmap context and relevant state. Else return error*/ |
| if (NULL == NdefMap) |
| { |
| result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); |
| } |
| else if ((NdefMap->CompletionRoutine->CompletionRoutine == NULL) |
| || (NdefMap->CompletionRoutine->Context == NULL)) |
| { |
| result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); |
| } |
| else |
| { |
| switch (NdefMap->CardType) |
| { |
| case PH_FRINFC_NDEFMAP_TOPAZ_CARD: |
| { |
| result = phFriNfc_TopazMap_ConvertToReadOnly (NdefMap); |
| break; |
| } |
| |
| case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD: |
| { |
| result = phFriNfc_TopazDynamicMap_ConvertToReadOnly (NdefMap); |
| break; |
| } |
| |
| case PH_FRINFC_NDEFMAP_ISO15693_CARD: |
| { |
| result = phFriNfc_ISO15693_ConvertToReadOnly (NdefMap); |
| break; |
| } |
| |
| default: |
| { |
| result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| break; |
| } |
| } |
| } |
| return result; |
| } |
| |
| #endif /* #ifdef FRINFC_READONLY_NDEF */ |
| |
| /*! |
| * Check whether a particular Remote Device is NDEF compliant. |
| * |
| * The function initiates the ndef compliancy check. |
| * |
| * This is a main check ndef api.Internally,depending upon the different |
| * opmodes,respective mifare/desfire checkNdef apis are called. |
| * In future this can be extended to check any types of card ndef |
| * compliancy. |
| * |
| * It performs a reset of the state and starts the action (state machine). |
| * A periodic call of the \ref phFriNfcNdefMap_Process has to be done once |
| * the action has been triggered. |
| * |
| * NOTE: Please refer the header file for more information. |
| * |
| */ |
| |
| NFCSTATUS phFriNfc_NdefMap_ChkNdef( phFriNfc_NdefMap_t *NdefMap) |
| { |
| NFCSTATUS status = NFCSTATUS_PENDING; |
| uint8_t sak; |
| |
| |
| /* Check for ndefmap context and relevant state. Else return error*/ |
| if ( NdefMap == NULL ) |
| { |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); |
| } |
| else |
| { |
| if( (NdefMap->State != PH_FRINFC_NDEFMAP_STATE_RESET_INIT) || |
| (NdefMap->psRemoteDevInfo->SessionOpened != 0x01 ) ) |
| /* Harsha: If SessionOpened is not 1, this means that connect has not happened */ |
| { |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_DEVICE_REQUEST); |
| } |
| else if ( (NdefMap->CompletionRoutine->CompletionRoutine == NULL) || (NdefMap->CompletionRoutine->Context == NULL )) |
| { |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); |
| } |
| else |
| { |
| /* |
| * 1.Changed |
| * CardInfo106 Replace with the ReaderA_Info. |
| */ |
| |
| sak = NdefMap->psRemoteDevInfo->RemoteDevInfo.Iso14443A_Info.Sak; |
| |
| /* |
| * 3. Changed |
| * Description: Opmode replace with RemDevType. |
| */ |
| |
| |
| switch ( NdefMap->psRemoteDevInfo->RemDevType ) |
| { |
| #ifndef PH_FRINFC_MAP_ISO15693_DISABLED |
| case phHal_eISO15693_PICC: |
| { |
| status = phFriNfc_ISO15693_ChkNdef (NdefMap); |
| break; |
| } |
| #else /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ |
| |
| case phHal_eMifare_PICC: |
| case phHal_eISO14443_3A_PICC: |
| /* Remote device is Mifare card . Check for Mifare |
| NDEF compliancy */ |
| if(0x00 == sak) |
| { |
| /* The SAK/Sel_Res says the card is of the type |
| Mifare UL */ |
| #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED |
| status = phFriNfc_MifareUL_ChkNdef( NdefMap); |
| #else /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ |
| } |
| else if ((0x08 == (sak & 0x18)) || |
| (0x18 == (sak & 0x18)) || |
| (0x01 == sak)) |
| { |
| /* The SAK/Sel_Res says the card is of the type |
| Mifare Standard */ |
| #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED |
| status = phFriNfc_MifareStdMap_ChkNdef( NdefMap); |
| #else /* PH_FRINFC_MAP_MIFARESTD_DISABLED*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED*/ |
| } |
| else |
| { |
| /* Invalid Mifare UL card, as the remote device |
| info - opmode says its a Mifare UL card but, |
| The SAK/Sel_Res is wrong */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| } |
| break; |
| case phHal_eISO14443_B_PICC: |
| { |
| status = phFriNfc_Desfire_ChkNdef(NdefMap); |
| } |
| break; |
| case phHal_eISO14443_A_PICC : |
| /* Remote device is Desfire card . Check for Desfire |
| NDEF compliancy */ |
| if(0x20 == (sak & 0x20)) |
| { |
| /* The SAK/Sel_Res says the card is of the type |
| ISO14443_4A */ |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| status = phFriNfc_Desfire_ChkNdef(NdefMap); |
| #else /* PH_FRINFC_MAP_DESFIRE_DISABLED*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED*/ |
| } |
| else |
| { |
| /* Invalid Desfire card, as the remote device |
| info - opmode says its a desfire card but, |
| The SAK/Sel_Res is wrong */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| } |
| break; |
| |
| case phHal_eFelica_PICC: |
| |
| /*Set the OpMode Type Flag*/ |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| #ifndef PH_HAL4_ENABLE |
| NdefMap->OpModeType[0] = phHal_eOpModesFelica212; |
| NdefMap->OpModeType[1] = phHal_eOpModesArrayTerminator; |
| #endif /* #ifndef PH_HAL4_ENABLE */ |
| status = phFriNfc_Felica_ChkNdef(NdefMap); |
| #else /* PH_FRINFC_MAP_FELICA_DISABLED*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED*/ |
| |
| break; |
| |
| #ifndef PH_HAL4_ENABLE |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| case phHal_eFelica424: |
| /*Set the OpMode Ttype Flag*/ |
| NdefMap->OpModeType[0] = phHal_eOpModesFelica424; |
| NdefMap->OpModeType[1] = phHal_eOpModesArrayTerminator; |
| status = phFriNfc_Felica_ChkNdef(NdefMap); |
| #else /* PH_FRINFC_MAP_FELICA_DISABLED*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED*/ |
| break; |
| #endif |
| |
| case phHal_eJewel_PICC : |
| /* Remote device is Topaz card . Check for Topaz |
| NDEF compliancy */ |
| #ifdef PH_HAL4_ENABLE |
| #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED |
| /* Decide on the Header bytes to know the |
| Type of the Topaz card.Card could be Static or |
| Dynamic type. These are of type NFFC-NDEF Data Application*/ |
| if ( NdefMap->psRemoteDevInfo->RemoteDevInfo.Jewel_Info.HeaderRom0 |
| == PH_FRINFC_TOPAZ_HEADROM0_VAL) |
| { |
| |
| status = phFriNfc_TopazMap_ChkNdef(NdefMap); |
| } |
| #ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED |
| else if( NdefMap->psRemoteDevInfo->RemoteDevInfo.Jewel_Info.HeaderRom0 |
| == PH_FRINFC_TOPAZ_DYNAMIC_HEADROM0_VAL) |
| { |
| |
| status = phFriNfc_TopazDynamicMap_ChkNdef(NdefMap); |
| } |
| #endif |
| else |
| { |
| |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| |
| } |
| #endif |
| |
| |
| #else |
| if(0xC2 == sak) |
| { |
| /* The SAK/Sel_Res says the card is of the type |
| ISO14443_4A */ |
| #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED |
| status = phFriNfc_TopazMap_ChkNdef(NdefMap); |
| #else /* PH_FRINFC_MAP_TOPAZ_DISABLED*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED*/ |
| } |
| else |
| { |
| /* Invalid Topaz card, as the remote device |
| info - opmode says its a desfire card but, |
| The SAK/Sel_Res is wrong */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| } |
| #endif |
| break; |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| case phHal_eOpModesMockup : |
| /*Set the OpMode Ttype Flag*/ |
| NdefMap->OpModeType[0] = phHal_eOpModesMockup; |
| NdefMap->OpModeType[1] = phHal_eOpModesArrayTerminator; |
| status = phFriNfc_Mockup_ChkNdef(NdefMap); |
| break; |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| |
| default : |
| /* Remote device is not recognised. |
| Probably not NDEF compliant */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| break; |
| } |
| } |
| } |
| return status; |
| } |
| |
| |
| /*! |
| * \brief Completion Routine, Processing function, needed to avoid long blocking. |
| * \note The lower (Overlapped HAL) layer must register a pointer to this function as a Completion |
| * Routine in order to be able to notify the component that an I/O has finished and data are |
| * ready to be processed. |
| * This is a main Ndef Map Process api.Internally,depending upon the different |
| * CardTypes,respective mifare/desfire process functions are called. |
| * |
| */ |
| |
| void phFriNfc_NdefMap_Process( void *Context, |
| NFCSTATUS Status) |
| { |
| |
| if ( Context != NULL ) |
| { |
| phFriNfc_NdefMap_t *NdefMap = (phFriNfc_NdefMap_t *)Context; |
| /* |
| * 4 Changed |
| * Description: Opmode replace with RevDevTyp. |
| */ |
| |
| switch ( NdefMap->psRemoteDevInfo->RemDevType ) |
| { |
| case phHal_eMifare_PICC : |
| case phHal_eISO14443_3A_PICC: |
| |
| if((NdefMap->CardType == PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD) || |
| (NdefMap->CardType == PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD)) |
| { |
| #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED |
| /* Remote device is Mifare Standard card */ |
| phFriNfc_MifareStdMap_Process(NdefMap,Status); |
| #else /* PH_FRINFC_MAP_MIFARESTD_DISABLED*/ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED*/ |
| } |
| else |
| { |
| #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED |
| /* Remote device is Mifare UL card */ |
| phFriNfc_MifareUL_Process(NdefMap,Status); |
| #else /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ |
| } |
| break; |
| |
| case phHal_eISO14443_A_PICC : |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| /* Remote device is Desfire card */ |
| phFriNfc_Desfire_Process(NdefMap, Status); |
| #else /* PH_FRINFC_MAP_DESFIRE_DISABLED*/ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED*/ |
| break; |
| case phHal_eISO14443_B_PICC: |
| /* Remote device is Desfire card */ |
| phFriNfc_Desfire_Process(NdefMap, Status); |
| break; |
| |
| case phHal_eFelica_PICC : |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| /* Remote device is Felica Smart card */ |
| phFriNfc_Felica_Process(NdefMap, Status); |
| #else /* PH_FRINFC_MAP_FELICA_DISABLED*/ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED*/ |
| break; |
| |
| case phHal_eJewel_PICC: |
| #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED |
| if ( NdefMap->CardType == PH_FRINFC_NDEFMAP_TOPAZ_CARD ) |
| { |
| /* Remote device is Topaz Smart card */ |
| phFriNfc_TopazMap_Process(NdefMap, Status); |
| } |
| #ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED |
| else if ( NdefMap->CardType == PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD ) |
| { |
| /* Remote device is Topaz Smart card */ |
| phFriNfc_TopazDynamicMap_Process(NdefMap, Status); |
| } |
| else |
| { |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| |
| } |
| break; |
| #endif /* PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED*/ |
| #endif |
| |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| case phHal_eOpModesMockup: |
| /* Remote device is Desfire card */ |
| phFriNfc_Mockup_Process(NdefMap, Status); |
| break; |
| #endif /* PHFRINFC_OVRHAL_MOCKUP*/ |
| default : |
| /* Remote device opmode not recognised. |
| Probably not NDEF compliant */ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| /* set the state back to the Reset_Init state*/ |
| NdefMap->State = PH_FRINFC_NDEFMAP_STATE_RESET_INIT; |
| |
| /* set the completion routine*/ |
| NdefMap->CompletionRoutine[PH_FRINFC_NDEFMAP_CR_INVALID_OPE]. |
| CompletionRoutine(NdefMap->CompletionRoutine->Context, Status); |
| break; |
| } |
| } |
| else |
| { |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ |
| NFCSTATUS_INVALID_PARAMETER); |
| /* The control should not come here. As Context itself is NULL , |
| Can't call the CR*/ |
| } |
| } |
| |
| #if 0 |
| |
| NFCSTATUS phFriNfc_ChkAndParseTLV(phFriNfc_NdefMap_t *NdefMap) |
| { |
| NFCSTATUS status = NFCSTATUS_PENDING; |
| |
| switch ( NdefMap->CardType ) |
| { |
| #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED |
| case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : |
| |
| |
| break; |
| #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : |
| status = phFriNfc_Desf_ChkAndParseTLV(NdefMap); |
| return (status); |
| |
| break; |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : |
| |
| break; |
| #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : |
| ; |
| break; |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ |
| |
| default : |
| /* Unknown card type. Return error */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| |
| break; |
| } |
| |
| return ( status); |
| } |
| #endif |
| |
| |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| static void phFriNfc_DesfCapCont_HReset(phFriNfc_NdefMap_t *NdefMap) |
| { |
| /* Initialise/reset the desfire capability contatiner structure variables*/ |
| NdefMap->DesfireCapContainer.DesfVersion = 0; |
| NdefMap->DesfireCapContainer.NdefMsgFid = 0; |
| NdefMap->DesfireCapContainer.NdefFileSize = 0; |
| NdefMap->DesfireCapContainer.MaxCmdSize = 0; |
| NdefMap->DesfireCapContainer.MaxRespSize = 0; |
| NdefMap->DesfireCapContainer.ReadAccess = 0; |
| NdefMap->DesfireCapContainer.WriteAccess = 0; |
| } |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| static void phFriNfc_Felica_HReset(phFriNfc_NdefMap_t *NdefMap) |
| { |
| uint8_t index=0; |
| |
| /* Initialise/reset the different felica structure variables*/ |
| /* Reset all the felica Basic staruture variables*/ |
| NdefMap->Felica.CurBlockNo = 0; |
| |
| for(index = 0;index<PH_FRINFC_NDEFMAP_FELICA_BLOCK_SIZE;index++) |
| { |
| NdefMap->Felica.Rd_BytesToCopyBuff[index] = 0; |
| NdefMap->Felica.Wr_RemainedBytesBuff[index] = 0; |
| } |
| NdefMap->Felica.Rd_NoBytesToCopy = 0; |
| NdefMap->Felica.Wr_BytesRemained = 0; |
| |
| |
| /* Reset all the felica attribute information staruture variables*/ |
| for(index = 0;index<PH_FRINFC_NDEFMAP_FELICA_ATTR_NDEF_DATA_LEN;index++) |
| { |
| NdefMap->FelicaAttrInfo.LenBytes[index] = 0; |
| } |
| |
| NdefMap->FelicaAttrInfo.Nmaxb = 0; |
| NdefMap->FelicaAttrInfo.Nbr = 0; |
| NdefMap->FelicaAttrInfo.Nbw= 0; |
| NdefMap->FelicaAttrInfo.RdWrFlag = 0; |
| NdefMap->FelicaAttrInfo.WriteFlag = 0; |
| NdefMap->Felica.CurrBytesRead=0; |
| |
| /* Reset all the felica manufacture details staruture variables*/ |
| for(index = 0;index<PH_FRINFC_NDEFMAP_FELICA_MANUF_ID_DATA_LEN;index++) |
| { |
| NdefMap->FelicaManufDetails.ManufID[index] = 0; |
| NdefMap->FelicaManufDetails.ManufParameter[index] = 0; |
| } |
| NdefMap->Felica.NoBlocksWritten=0; |
| } |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ |
| |
| NFCSTATUS phFriNfc_NdefMap_EraseNdef(phFriNfc_NdefMap_t *NdefMap) |
| { |
| NFCSTATUS status = NFCSTATUS_PENDING; |
| |
| static uint8_t PktData[3] = PH_FRINFC_NDEFMAP_EMPTY_NDEF_MSG; |
| uint8_t MemOffset = PH_FRINFC_NDEFMAP_SEEK_BEGIN; |
| static uint32_t PacketDataLength = sizeof(PktData); |
| |
| if (NdefMap == NULL ) |
| { |
| /* Invalid input parameter error */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,NFCSTATUS_INVALID_PARAMETER); |
| } |
| else |
| { |
| switch ( NdefMap->CardType) |
| { |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| case PH_FRINFC_NDEFMAP_MOCKUP_CARD : |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : |
| case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : |
| #ifdef DESFIRE_EV1 |
| case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 : |
| #endif /* #ifdef DESFIRE_EV1 */ |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : |
| #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED |
| case PH_FRINFC_NDEFMAP_TOPAZ_CARD : |
| #ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED |
| case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD : |
| #endif |
| #ifndef PH_FRINFC_MAP_ISO15693_DISABLED |
| case PH_FRINFC_NDEFMAP_ISO15693_CARD: |
| #endif |
| #endif |
| /* Mifare card selected. Call Mifare Write */ |
| status = phFriNfc_NdefMap_WrNdef( NdefMap, |
| PktData, |
| &PacketDataLength, |
| MemOffset); |
| break; |
| |
| case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : |
| |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| /* Felica card selected. Call to write EMPTY NDEF Msg */ |
| status = phFriNfc_Felica_EraseNdef( NdefMap ); |
| #else /* PH_FRINFC_MAP_FELICA_DISABLED*/ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED*/ |
| |
| break; |
| default : |
| /* Unknown card type. Return error */ |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| break; |
| } |
| } |
| return status; |
| } |
| /* Harsha: Fix for the mantis entry 0000420: NDEF_MAP: Size of NDEF data: |
| no abstracted way for user to know how many bytes to read/write */ |
| |
| /*! |
| * \brief Helper API, exposed to the user to enable him to know the size |
| * of the NDEF data that he can write in to the card. |
| */ |
| NFCSTATUS phFriNfc_NdefMap_GetContainerSize(const phFriNfc_NdefMap_t *NdefMap,uint32_t *maxSize, uint32_t *actualSize) |
| { |
| NFCSTATUS result = NFCSTATUS_SUCCESS; |
| uint8_t sect_index = 0; |
| uint8_t actual_sect_index = 0; |
| uint8_t count_index = 0; |
| |
| if( (NdefMap == NULL) || (maxSize == NULL) || (actualSize == NULL)) |
| { |
| /* Invalid input parameter error */ |
| result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,NFCSTATUS_INVALID_PARAMETER); |
| } |
| else |
| { |
| /* Which card ? */ |
| switch(NdefMap->CardType) |
| { |
| #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED |
| case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : |
| /* Mifare UL card */ |
| /* The integration needs to ensure that the checkNdef |
| function has been called before calling this function, |
| otherwise NdefMap->CardMemSize will be 0 */ |
| *maxSize = NdefMap->MifareULContainer.RemainingSize; |
| /* In Mifare UL card, the actual size is the length field |
| value of the TLV */ |
| *actualSize = NdefMap->TLVStruct.ActualSize; |
| break; |
| #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED |
| case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : |
| #ifdef DESFIRE_EV1 |
| case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 : |
| #endif /* #ifdef DESFIRE_EV1 */ |
| /* Desfire card */ |
| /* The integration needs to ensure that the checkNdef |
| function has been called before calling this function, |
| otherwise NdefMap->DesfireCapContainer.NdefFileSize |
| will be 0 */ |
| /* -2 bytes represents the size field bytes*/ |
| *maxSize = NdefMap->DesfireCapContainer.NdefFileSize - 2; |
| /* In Desfire card, the actual size cant be calculated so |
| the actual size is given as 0xFFFFFFFF */ |
| *actualSize = NdefMap->DesfireCapContainer.NdefDataLen; |
| break; |
| #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED |
| case PH_FRINFC_NDEFMAP_TOPAZ_CARD : |
| /* Topaz card */ |
| /* The integration needs to ensure that the checkNdef |
| function has been called before calling this function, |
| otherwise NdefMap->CardMemSize will be 0 */ |
| *maxSize = NdefMap->TopazContainer.RemainingSize; |
| /* In Topaz card, the actual size is the length field value of the |
| TLV */ |
| *actualSize = NdefMap->TLVStruct.BytesRemainLinTLV; |
| break; |
| #ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED |
| case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD : |
| /* Topaz 512 card */ |
| /* The integration needs to ensure that the checkNdef |
| function has been called before calling this function, |
| otherwise NdefMap->CardMemSize will be 0 */ |
| *maxSize = NdefMap->TopazContainer.NDEFRWSize; |
| /* In Topaz card, the actual size is the length field value of the |
| TLV */ |
| *actualSize = NdefMap->TopazContainer.ActualNDEFMsgSize; |
| break; |
| |
| #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ |
| #endif /* PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED */ |
| #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : |
| case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : |
| /* Mifare std card */ |
| |
| /* Max size is the number of NDEF compliant blocks in the card |
| multiplied by 16 bytes */ |
| #ifndef PH_HAL4_ENABLE |
| |
| *maxSize = NdefMap->StdMifareContainer.remainingSize; |
| |
| #else /* #ifndef PH_HAL4_ENABLE */ |
| |
| while ((PH_FRINFC_MIFARESTD_NDEF_COMP == |
| NdefMap->StdMifareContainer.aid[count_index]) && |
| (count_index < |
| PH_FRINFC_NDEFMAP_MIFARESTD_TOTALNO_BLK)) |
| { |
| actual_sect_index++; |
| count_index++; |
| } |
| /* Total number of sectors in 1k = 16 (0 to 15, MAD sector number = 0) |
| Total number of sectors in 4k = 40 (0 to 39, |
| MAD sector number = 0 and 16, After block number 31, each sector |
| has 16 blocks) |
| Every last block of the sector is the sector header, So the blocks |
| that can be read or written in each sector is always |
| (number of blocks in each sector - 1) |
| No of blocks in the one sector till the sector number 0 to 31 |
| (total 32 sectors) = |
| 4 blocks, So blocks that can be read/write = (4 - 1 = 3 blocks) |
| No of blocks in the one sector after the sector number 31 to 39 = |
| 16 blocks, So blocks that can be read/write = (16 - 1 = 15 blocks) |
| Each block has 16 bytes |
| To calculate number of bytes in the sector, depending on the number |
| of blocks multiplied by 16 |
| */ |
| if (PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD == |
| NdefMap->CardType) |
| { |
| if (actual_sect_index > 32) |
| { |
| sect_index = (actual_sect_index - 32); |
| /* Here, 30 is used because block number 0 and 16 are MAD blocks |
| which cannot be used for reading and writing data |
| 3 and 15 are blocks in each sector which can be read/write |
| 3 indicates the sector is in between (0 and 31) |
| 15 indicates the sector is in between (32 to 39) |
| 16 is always number of bytes in each block |
| 4 is used because each NDEF write has to write using the |
| TLV format and T & L takes 4 bytes length and V is the |
| input data |
| */ |
| *maxSize = (((30 * (16 * 3)) + (sect_index * (16 * 15))) - 4); |
| } |
| else if (actual_sect_index <= 16) |
| { |
| *maxSize = (((actual_sect_index - 1) * (16 * 3)) - 4); |
| } |
| else |
| { |
| *maxSize = (((actual_sect_index - 2) * (16 * 3)) - 4); |
| } |
| } |
| else |
| { |
| /* Here, 16 is always number of bytes in each block |
| 3 indicates the sector is in between (0 and 31) */ |
| if (actual_sect_index > NdefMap->StdMifareContainer.SectorIndex) |
| { |
| actual_sect_index = NdefMap->StdMifareContainer.SectorIndex; |
| } |
| *maxSize = (((actual_sect_index - 1) * (16 * 3)) - 4); |
| } |
| |
| #endif /* #ifndef PH_HAL4_ENABLE */ |
| *actualSize = NdefMap->TLVStruct.BytesRemainLinTLV; |
| |
| break; |
| #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_FELICA_DISABLED |
| case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : |
| /* Felica card */ |
| |
| *maxSize = NdefMap->FelicaAttrInfo.Nmaxb * 0x10; |
| |
| /* In Felica Card, actual size is calculated using the Length Bytes */ |
| *actualSize = NdefMap->FelicaAttrInfo.LenBytes[0]; |
| *actualSize = *actualSize << 16; |
| *actualSize += NdefMap->FelicaAttrInfo.LenBytes[1]; |
| *actualSize = *actualSize << 8; |
| *actualSize += NdefMap->FelicaAttrInfo.LenBytes[2]; |
| break; |
| #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ |
| |
| #ifndef PH_FRINFC_MAP_ISO15693_DISABLED |
| case PH_FRINFC_NDEFMAP_ISO15693_CARD: |
| { |
| #if 1 |
| uint16_t block_no = 0; |
| uint8_t byte_no = 0; |
| |
| block_no = (uint16_t) |
| ISO15693_GET_VALUE_FIELD_BLOCK_NO ( |
| NdefMap->ISO15693Container.ndef_tlv_type_blk, |
| NdefMap->ISO15693Container.ndef_tlv_type_byte, |
| NdefMap->ISO15693Container.actual_ndef_size); |
| byte_no = (uint8_t) |
| ISO15693_GET_VALUE_FIELD_BYTE_NO ( |
| NdefMap->ISO15693Container.ndef_tlv_type_blk, |
| NdefMap->ISO15693Container.ndef_tlv_type_byte, |
| NdefMap->ISO15693Container.actual_ndef_size); |
| |
| *maxSize = (NdefMap->ISO15693Container.max_data_size - |
| ((block_no * ISO15693_BYTES_PER_BLOCK) + byte_no)); |
| #else /* #if 1 */ |
| /* 2 is used to exclude the T and L part of the TLV */ |
| *maxSize = (NdefMap->ISO15693Container.max_data_size |
| - ISO15693_BYTES_PER_BLOCK - 2); |
| #endif /* #if 1 */ |
| *actualSize = NdefMap->ISO15693Container.actual_ndef_size; |
| break; |
| } |
| #endif |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| case PH_FRINFC_NDEFMAP_MOCKUP_CARD : |
| *maxSize = 0xFFFFFFFF; |
| /* In Desfire card, the actual size cant be calculated so |
| the actual size is given as 0xFFFFFFFF */ |
| *actualSize = 0xFFFFFFFF; |
| break; |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| |
| default : |
| /* Unknown card type. Return error */ |
| result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| break; |
| } |
| } |
| return(result); |
| } |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| NFCSTATUS phFriNfc_NdefMap_MockupCardSetter(phFriNfc_NdefMap_t *NdefMap, |
| uint8_t *NdefData, |
| uint32_t NdefActualSize, |
| uint32_t NdefMaxSize, |
| uint32_t CardSize) |
| { |
| NFCSTATUS Status = NFCSTATUS_SUCCESS; |
| // First check all parameters |
| if((NdefData != NULL) && (NdefMap != NULL)) |
| { |
| // OK we can set |
| NdefMap->MochupContainer.NdefData = NdefData; |
| NdefMap->MochupContainer.NdefActualSize = NdefActualSize; |
| NdefMap->MochupContainer.NdefMaxSize = NdefMaxSize; |
| NdefMap->MochupContainer.CardSize = CardSize; |
| NdefMap->MochupContainer.CurrentBlock = 0; |
| |
| } else |
| { |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); |
| } |
| return Status; |
| } |
| |
| NFCSTATUS phFriNfc_NdefMap_MockupNDefModeEn(uint8_t *pNdefCompliancy, uint8_t *pCardType, uint8_t Enable) |
| { |
| *pNdefCompliancy = Enable; |
| *pCardType = PH_FRINFC_NDEFMAP_MOCKUP_CARD; |
| return NFCSTATUS_SUCCESS; |
| } |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| |
| |
| |
| |
| |
| |
| |
| |
