| /* |
| * Copyright (C) 2010 NXP Semiconductors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /*! |
| * \file phFriNfc_SmtCrdFmt.c |
| * \brief This component encapsulates different smart and simple tag formatting functionalities, |
| * for the mapping layer. |
| * |
| * Project: NFC-FRI |
| * |
| * $Date: Mon Dec 13 14:14:13 2010 $ |
| * $Author: ing02260 $ |
| * $Revision: 1.9 $ |
| * $Aliases: $ |
| * |
| */ |
| |
| #ifndef PH_FRINFC_CARD_FORMAT_DISABLED |
| |
| #include <phNfcTypes.h> |
| #include <phFriNfc_OvrHal.h> |
| #include <phFriNfc_SmtCrdFmt.h> |
| #ifdef DISABLE_FORMAT |
| #include <phFriNfc_TopazFormat.h> |
| #endif /* #ifdef DISABLE_FORMAT */ |
| #include <phFriNfc_MifULFormat.h> |
| #include <phFriNfc_DesfireFormat.h> |
| #include <phFriNfc_MifStdFormat.h> |
| #ifndef PH_FRINFC_FMT_ISO15693_DISABLED |
| #include <phFriNfc_ISO15693Format.h> |
| #endif /* #ifndef PH_FRINFC_FMT_ISO15693_DISABLED */ |
| |
| |
| /*! \ingroup grp_file_attributes |
| * \name NDEF Mapping |
| * |
| * File: \ref phFriNfc_CardFormatFunctions.c |
| * |
| */ |
| /*@{*/ |
| // file versions |
| /*@}*/ |
| |
| |
| |
| |
| void phFriNfc_SmtCrdFmt_HCrHandler(phFriNfc_sNdefSmtCrdFmt_t *NdefSmtCrdFmt, |
| NFCSTATUS Status) |
| { |
| /* set the state back to the Reset_Init state*/ |
| NdefSmtCrdFmt->State = PH_FRINFC_SMTCRDFMT_STATE_RESET_INIT; |
| |
| /* set the completion routine*/ |
| NdefSmtCrdFmt->CompletionRoutine[PH_FRINFC_SMTCRDFMT_CR_FORMAT]. |
| CompletionRoutine(NdefSmtCrdFmt->CompletionRoutine->Context, Status); |
| } |
| |
| /*! |
| * \brief Used to Reset the context variables , before the actual smart card formatting |
| * procedure. |
| * |
| */ |
| NFCSTATUS phFriNfc_NdefSmtCrd_Reset(phFriNfc_sNdefSmtCrdFmt_t *NdefSmtCrdFmt, |
| void *LowerDevice, |
| phHal_sRemoteDevInformation_t *psRemoteDevInfo, |
| phHal_sDevInputParam_t *psDevInputParam, |
| uint8_t *SendRecvBuffer, |
| uint16_t *SendRecvBuffLen) |
| { |
| NFCSTATUS result = NFCSTATUS_SUCCESS; |
| uint8_t index; |
| |
| if ( (SendRecvBuffLen == NULL) || (NdefSmtCrdFmt == NULL) || (psRemoteDevInfo == NULL) || |
| (SendRecvBuffer == NULL) || (LowerDevice == NULL) || |
| (*SendRecvBuffLen == 0) || (psDevInputParam == NULL) || |
| (*SendRecvBuffLen < PH_FRINFC_SMTCRDFMT_MAX_SEND_RECV_BUF_SIZE) ) |
| { |
| result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, NFCSTATUS_INVALID_PARAMETER); |
| } |
| else |
| { |
| /* Initialise the state to Init */ |
| NdefSmtCrdFmt->State = PH_FRINFC_SMTCRDFMT_STATE_RESET_INIT; |
| |
| for(index = 0;index<PH_FRINFC_SMTCRDFMT_CR;index++) |
| { |
| /* Initialise the NdefMap Completion Routine to Null */ |
| NdefSmtCrdFmt->CompletionRoutine[index].CompletionRoutine = NULL; |
| /* Initialise the NdefMap Completion Routine context to Null */ |
| NdefSmtCrdFmt->CompletionRoutine[index].Context = NULL; |
| } |
| |
| /* Lower Device(Always Overlapped HAL Struct initialised in application |
| is registred in NdefMap Lower Device) */ |
| NdefSmtCrdFmt->LowerDevice = LowerDevice; |
| |
| /* Remote Device info received from Manual Device Discovery is registered here */ |
| NdefSmtCrdFmt->psRemoteDevInfo = psRemoteDevInfo; |
| |
| /* Trx Buffer registered */ |
| NdefSmtCrdFmt->SendRecvBuf = SendRecvBuffer; |
| |
| /* Trx Buffer Size */ |
| NdefSmtCrdFmt->SendRecvLength = SendRecvBuffLen; |
| |
| /* Register Transfer Buffer Length */ |
| NdefSmtCrdFmt->SendLength = 0; |
| |
| /* Initialise the Format status flag*/ |
| NdefSmtCrdFmt->FmtProcStatus = 0; |
| |
| /* Reset the Card Type */ |
| NdefSmtCrdFmt->CardType = 0; |
| |
| /* Reset MapCompletion Info*/ |
| NdefSmtCrdFmt->SmtCrdFmtCompletionInfo.CompletionRoutine = NULL; |
| NdefSmtCrdFmt->SmtCrdFmtCompletionInfo.Context = NULL; |
| |
| #ifndef PH_FRINFC_FMT_TOPAZ_DISABLED |
| phFriNfc_Topaz_Reset(NdefSmtCrdFmt); |
| |
| #endif /* PH_FRINFC_FMT_TOPAZ_DISABLED */ |
| |
| #ifndef PH_FRINFC_FMT_DESFIRE_DISABLED |
| /*Reset Desfire Cap Container elements*/ |
| phFriNfc_Desfire_Reset(NdefSmtCrdFmt); |
| #endif /* PH_FRINFC_FMT_DESFIRE_DISABLED */ |
| |
| #ifndef PH_FRINFC_FMT_MIFARESTD_DISABLED |
| /*Reset Mifare Standard Container elements*/ |
| NdefSmtCrdFmt->AddInfo.MfStdInfo.DevInputParam = psDevInputParam; |
| phFriNfc_MfStd_Reset(NdefSmtCrdFmt); |
| #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ |
| |
| #ifndef PH_FRINFC_FMT_MIFAREUL_DISABLED |
| phFriNfc_MfUL_Reset(NdefSmtCrdFmt); |
| #endif /* #ifndef PH_FRINFC_FMT_MIFAREUL_DISABLED */ |
| |
| #ifndef PH_FRINFC_FMT_ISO15693_DISABLED |
| phFriNfc_ISO15693_FmtReset (NdefSmtCrdFmt); |
| #endif /* #ifndef PH_FRINFC_FMT_ISO15693_DISABLED */ |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| /*Reset Desfire Cap Container elements*/ |
| // phFriNfc_Mockup_H_Reset(NdefSmtCrdFmt); |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| |
| } |
| return (result); |
| |
| } |
| |
| /*! |
| * \brief Completion Routine initialisation |
| * |
| */ |
| NFCSTATUS phFriNfc_NdefSmtCrd_SetCR(phFriNfc_sNdefSmtCrdFmt_t *NdefSmtCrdFmt, |
| uint8_t FunctionID, |
| pphFriNfc_Cr_t CompletionRoutine, |
| void *CompletionRoutineContext) |
| { |
| NFCSTATUS status = NFCSTATUS_SUCCESS; |
| |
| if ((NdefSmtCrdFmt == NULL) || (FunctionID >= PH_FRINFC_SMTCRDFMT_CR) || |
| (CompletionRoutine == NULL) || (CompletionRoutineContext == NULL)) |
| { |
| status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, NFCSTATUS_INVALID_PARAMETER); |
| } |
| else |
| { |
| /* Register the application callback with the NdefMap Completion Routine */ |
| NdefSmtCrdFmt->CompletionRoutine[FunctionID].CompletionRoutine = CompletionRoutine; |
| |
| /* Register the application context with the NdefMap Completion Routine context */ |
| NdefSmtCrdFmt->CompletionRoutine[FunctionID].Context = CompletionRoutineContext; |
| } |
| |
| return status; |
| } |
| |
| #ifdef FRINFC_READONLY_NDEF |
| |
| NFCSTATUS |
| phFriNfc_NdefSmtCrd_ConvertToReadOnly ( |
| phFriNfc_sNdefSmtCrdFmt_t *NdefSmtCrdFmt) |
| { |
| NFCSTATUS result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_PARAMETER); |
| uint8_t sak = 0; |
| |
| if((NdefSmtCrdFmt != NULL) |
| && (NdefSmtCrdFmt->CompletionRoutine->CompletionRoutine != NULL) |
| && (NdefSmtCrdFmt->CompletionRoutine->Context != NULL)) |
| { |
| sak = NdefSmtCrdFmt->psRemoteDevInfo->RemoteDevInfo.Iso14443A_Info.Sak; |
| switch (NdefSmtCrdFmt->psRemoteDevInfo->RemDevType) |
| { |
| case phHal_eMifare_PICC: |
| { |
| if (0x00 == sak) |
| { |
| result = phFriNfc_MfUL_ConvertToReadOnly (NdefSmtCrdFmt); |
| } |
| else |
| { |
| /* MIFARE classic 1k/4k is not supported */ |
| result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| } |
| break; |
| } |
| |
| case phHal_eISO14443_A_PICC: |
| { |
| result = phFriNfc_Desfire_ConvertToReadOnly (NdefSmtCrdFmt); |
| break; |
| } |
| |
| default : |
| { |
| /* Remote device is not recognised. |
| Probably not NDEF compliant */ |
| result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| break; |
| } |
| } |
| } |
| return result; |
| } |
| |
| #endif /* #ifdef FRINFC_READONLY_NDEF */ |
| |
| |
| /*! |
| * \brief Used to format the different smart cards. |
| * |
| */ |
| NFCSTATUS phFriNfc_NdefSmtCrd_Format( phFriNfc_sNdefSmtCrdFmt_t *NdefSmtCrdFmt, const uint8_t *ScrtKeyB ) |
| { |
| /* Component ID needs to be changed */ |
| NFCSTATUS Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_PARAMETER); |
| uint8_t sak = 0; |
| |
| /* Check for the correct context structure */ |
| if((NdefSmtCrdFmt != NULL) && |
| (NdefSmtCrdFmt->CompletionRoutine->CompletionRoutine != NULL) && |
| (NdefSmtCrdFmt->CompletionRoutine->Context != NULL)) |
| { |
| #ifdef PH_HAL4_ENABLE |
| /* SAK (Select response) */ |
| sak = NdefSmtCrdFmt->psRemoteDevInfo->RemoteDevInfo.Iso14443A_Info.Sak; |
| |
| /* Depending on the Opmodes, call the respective card functions */ |
| switch ( NdefSmtCrdFmt->psRemoteDevInfo->RemDevType ) |
| #else |
| /* SAK (Select response) */ |
| sak = NdefSmtCrdFmt->psRemoteDevInfo->RemoteDevInfo.CardInfo106. |
| Startup106.SelRes; |
| |
| /* Depending on the Opmodes, call the respective card functions */ |
| switch ( NdefSmtCrdFmt->psRemoteDevInfo->OpMode ) |
| #endif /* #ifdef PH_HAL4_ENABLE */ |
| { |
| #ifdef PH_HAL4_ENABLE |
| case phHal_eMifare_PICC : |
| #else |
| case phHal_eOpModesMifare : |
| #endif /* #ifdef PH_HAL4_ENABLE */ |
| /* Remote device is Mifare card . Check for Mifare |
| NDEF compliance */ |
| if(0x00 == sak) |
| { |
| #ifndef PH_FRINFC_FMT_MIFAREUL_DISABLED |
| /* The SAK/Sel_Res says the card is of the type |
| Mifare UL */ |
| NdefSmtCrdFmt->CardType = PH_FRINFC_SMTCRDFMT_MIFARE_UL_CARD; |
| if (NdefSmtCrdFmt->psRemoteDevInfo->RemoteDevInfo.Iso14443A_Info.UidLength == 7 && |
| NdefSmtCrdFmt->psRemoteDevInfo->RemoteDevInfo.Iso14443A_Info.Uid[0] == 0x04) |
| { |
| |
| Result = phFriNfc_MfUL_Format( NdefSmtCrdFmt); |
| } |
| else |
| { |
| Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| } |
| #else |
| Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* #ifndef PH_FRINFC_FMT_MIFAREUL_DISABLED */ |
| } |
| else if((0x08 == (sak & 0x18)) || |
| (0x18 == (sak & 0x18)) || |
| (0x01 == sak)) |
| { |
| #ifndef PH_FRINFC_FMT_MIFARESTD_DISABLED |
| NdefSmtCrdFmt->CardType = (uint8_t) |
| (((sak & 0x18) == 0x08)? |
| PH_FRINFC_SMTCRDFMT_MFSTD_1K_CRD: |
| PH_FRINFC_SMTCRDFMT_MFSTD_4K_CRD); |
| |
| /* The SAK/Sel_Res says the card is of the type |
| Mifare standard */ |
| Result = phFriNfc_MfStd_Format( NdefSmtCrdFmt, ScrtKeyB); |
| #else |
| Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* #ifndef PH_FRINFC_FMT_MIFARESTD_DISABLED */ |
| } |
| else |
| { |
| /* Invalid Mifare card, as the remote device |
| info - opmode says its a Mifare card but, |
| The SAK/Sel_Res is wrong */ |
| Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| } |
| break; |
| #ifdef PH_HAL4_ENABLE |
| case phHal_eISO14443_A_PICC : |
| #else |
| case phHal_eOpModesISO14443_4A : |
| #endif /* #ifdef PH_HAL4_ENABLE */ |
| /* Remote device is Desfire card . Check for Desfire |
| NDEF compliancy */ |
| if(0x20 == (sak & 0xFF)) |
| { |
| #ifndef PH_FRINFC_FMT_DESFIRE_DISABLED |
| NdefSmtCrdFmt->CardType = PH_FRINFC_SMTCRDFMT_ISO14443_4A_CARD; |
| /* The SAK/Sel_Res says the card is of the type |
| ISO14443_4A */ |
| |
| Result = phFriNfc_Desfire_Format(NdefSmtCrdFmt); |
| #else |
| Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* #ifndef PH_FRINFC_FMT_DESFIRE_DISABLED */ |
| } |
| else |
| { |
| /* Invalid Desfire card, as the remote device |
| info - opmode says its a desfire card but, |
| The SAK/Sel_Res is wrong */ |
| Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| } |
| break; |
| #ifdef PH_HAL4_ENABLE |
| case phHal_eJewel_PICC : |
| #else |
| case phHal_eOpModesJewel : |
| #endif /* #ifdef PH_HAL4_ENABLE */ |
| /* Remote device is Topaz card . Check for Topaz |
| NDEF compliancy */ |
| if(0xC2 == sak) |
| { |
| #ifndef PH_FRINFC_FMT_TOPAZ_DISABLED |
| NdefSmtCrdFmt->CardType = PH_FRINFC_SMTCRDFMT_TOPAZ_CARD; |
| /* The SAK/Sel_Res says the card is of the type |
| ISO14443_4A */ |
| Result = phFriNfc_Topaz_Format(NdefSmtCrdFmt); |
| #else |
| Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* #ifndef PH_FRINFC_FMT_TOPAZ_DISABLED */ |
| |
| } |
| else |
| { |
| /* Invalid Topaz card, as the remote device |
| info - opmode says its a desfire card but, |
| The SAK/Sel_Res is wrong */ |
| Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| } |
| break; |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| case phHal_eOpModesMockup : |
| /*Set the OpMode Ttype Flag*/ |
| NdefSmtCrdFmt->OpModeType[0] = phHal_eOpModesMockup; |
| NdefSmtCrdFmt->OpModeType[1] = phHal_eOpModesArrayTerminator; |
| //Result = phFriNfc_Mockup_ChkNdef(NdefSmtCrdFmt); |
| break; |
| #endif /* PHFRINFC_OVRHAL_MOCKUP */ |
| |
| #ifndef PH_FRINFC_FMT_ISO15693_DISABLED |
| case phHal_eISO15693_PICC: |
| { |
| Result = phFriNfc_ISO15693_Format (NdefSmtCrdFmt); |
| break; |
| } |
| #endif /* #ifndef PH_FRINFC_FMT_ISO15693_DISABLED */ |
| default : |
| /* Remote device is not recognised. |
| Probably not NDEF compliant */ |
| Result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| break; |
| } |
| } |
| return Result; |
| } |
| /*! |
| * \brief Handles different request and responses from the integration layer. |
| * |
| */ |
| void phFriNfc_NdefSmtCrd_Process(void *Context, |
| NFCSTATUS Status) |
| { |
| if ( Context != NULL ) |
| { |
| phFriNfc_sNdefSmtCrdFmt_t *NdefSmtCrdFmt = (phFriNfc_sNdefSmtCrdFmt_t *)Context; |
| #ifdef PH_HAL4_ENABLE |
| switch ( NdefSmtCrdFmt->psRemoteDevInfo->RemDevType ) |
| #else |
| switch ( NdefSmtCrdFmt->psRemoteDevInfo->OpMode ) |
| #endif /* #ifdef PH_HAL4_ENABLE */ |
| { |
| #ifdef PH_HAL4_ENABLE |
| case phHal_eMifare_PICC : |
| #else |
| case phHal_eOpModesMifare : |
| #endif /* #ifdef PH_HAL4_ENABLE */ |
| if((NdefSmtCrdFmt->CardType == PH_FRINFC_SMTCRDFMT_MFSTD_1K_CRD) || |
| (NdefSmtCrdFmt->CardType == PH_FRINFC_SMTCRDFMT_MFSTD_4K_CRD)) |
| { |
| #ifndef PH_FRINFC_FMT_MIFARESTD_DISABLED |
| /* Remote device is Mifare Standard card */ |
| phFriNfc_MfStd_Process(NdefSmtCrdFmt,Status); |
| |
| #else /* PH_FRINFC_FMT_MIFARESTD_DISABLED*/ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_FMT_MIFARESTD_DISABLED*/ |
| } |
| else |
| { |
| #ifndef PH_FRINFC_FMT_MIFAREUL_DISABLED |
| /* Remote device is Mifare UL card */ |
| phFriNfc_MfUL_Process(NdefSmtCrdFmt,Status); |
| #else /* PH_FRINFC_FMT_MIFAREUL_DISABLED*/ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_FMT_MIFAREUL_DISABLED*/ |
| } |
| break; |
| |
| #ifdef PH_HAL4_ENABLE |
| case phHal_eISO14443_A_PICC : |
| #else |
| case phHal_eOpModesISO14443_4A : |
| #endif /* #ifdef PH_HAL4_ENABLE */ |
| #ifndef PH_FRINFC_FMT_DESFIRE_DISABLED |
| /* Remote device is Desfire card */ |
| phFriNfc_Desf_Process(NdefSmtCrdFmt, Status); |
| #else /* PH_FRINFC_FMT_DESFIRE_DISABLED*/ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_FMT_DESFIRE_DISABLED*/ |
| break; |
| #ifdef PH_HAL4_ENABLE |
| case phHal_eJewel_PICC : |
| #else |
| case phHal_eOpModesJewel: |
| #endif /* #ifdef PH_HAL4_ENABLE */ |
| #ifndef PH_FRINFC_FMT_TOPAZ_DISABLED |
| /* Remote device is Topaz Smart card */ |
| phFriNfc_Topaz_Process(NdefSmtCrdFmt, Status); |
| #else /* PH_FRINFC_FMT_TOPAZ_DISABLED*/ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| #endif /* PH_FRINFC_FMT_TOPAZ_DISABLED*/ |
| break; |
| |
| #ifndef PH_FRINFC_FMT_ISO15693_DISABLED |
| case phHal_eISO15693_PICC : |
| { |
| phFriNfc_ISO15693_FmtProcess (NdefSmtCrdFmt, Status); |
| break; |
| } |
| #endif /* #ifndef PH_FRINFC_FMT_ISO15693_DISABLED */ |
| |
| #ifdef PHFRINFC_OVRHAL_MOCKUP |
| case phHal_eOpModesMockup: |
| /* Remote device is Desfire card */ |
| //phFriNfc_Mockup_Process(NdefSmtCrdFmt, Status); |
| break; |
| #endif /* PHFRINFC_OVRHAL_MOCKUP*/ |
| default : |
| /* Remote device opmode not recognised. |
| Probably not NDEF compliant */ |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, |
| NFCSTATUS_INVALID_REMOTE_DEVICE); |
| /* set the state back to the Reset_Init state*/ |
| NdefSmtCrdFmt->State = PH_FRINFC_SMTCRDFMT_STATE_RESET_INIT; |
| |
| /* set the completion routine*/ |
| NdefSmtCrdFmt->CompletionRoutine[PH_FRINFC_SMTCRDFMT_CR_INVALID_OPE]. |
| CompletionRoutine(NdefSmtCrdFmt->CompletionRoutine->Context, Status); |
| break; |
| } |
| } |
| else |
| { |
| Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT,\ |
| NFCSTATUS_INVALID_PARAMETER); |
| /* The control should not come here. As Context itself is NULL , |
| Can't call the CR*/ |
| } |
| } |
| |
| #endif /* PH_FRINFC_CARD_FORMAT_DISABLED */ |
| |
