| /* |
| * This file is part of DOS-libpcap |
| * Ported to DOS/DOSX by G. Vanem <giva@bgnett.no> |
| * |
| * pcap-dos.c: Interface to PKTDRVR, NDIS2 and 32-bit pmode |
| * network drivers. |
| * |
| * @(#) $Header: /tcpdump/master/libpcap/pcap-dos.c,v 1.1.2.1 2005/05/03 18:54:35 guy Exp $ (LBL) |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <signal.h> |
| #include <float.h> |
| #include <fcntl.h> |
| #include <io.h> |
| |
| #if defined(USE_32BIT_DRIVERS) |
| #include "msdos/pm_drvr/pmdrvr.h" |
| #include "msdos/pm_drvr/pci.h" |
| #include "msdos/pm_drvr/bios32.h" |
| #include "msdos/pm_drvr/module.h" |
| #include "msdos/pm_drvr/3c501.h" |
| #include "msdos/pm_drvr/3c503.h" |
| #include "msdos/pm_drvr/3c509.h" |
| #include "msdos/pm_drvr/3c59x.h" |
| #include "msdos/pm_drvr/3c515.h" |
| #include "msdos/pm_drvr/3c90x.h" |
| #include "msdos/pm_drvr/3c575_cb.h" |
| #include "msdos/pm_drvr/ne.h" |
| #include "msdos/pm_drvr/wd.h" |
| #include "msdos/pm_drvr/accton.h" |
| #include "msdos/pm_drvr/cs89x0.h" |
| #include "msdos/pm_drvr/rtl8139.h" |
| #include "msdos/pm_drvr/ne2k-pci.h" |
| #endif |
| |
| #include "pcap.h" |
| #include "pcap-dos.h" |
| #include "pcap-int.h" |
| #include "msdos/pktdrvr.h" |
| |
| #ifdef USE_NDIS2 |
| #include "msdos/ndis2.h" |
| #endif |
| |
| #include <arpa/inet.h> |
| #include <net/if.h> |
| #include <net/if_arp.h> |
| #include <net/if_ether.h> |
| #include <net/if_packe.h> |
| #include <tcp.h> |
| |
| #if defined(USE_32BIT_DRIVERS) |
| #define FLUSHK() do { _printk_safe = 1; _printk_flush(); } while (0) |
| #define NDIS_NEXT_DEV &rtl8139_dev |
| |
| static char *rx_pool = NULL; |
| static void init_32bit (void); |
| |
| static int pktq_init (struct rx_ringbuf *q, int size, int num, char *pool); |
| static int pktq_check (struct rx_ringbuf *q); |
| static int pktq_inc_out (struct rx_ringbuf *q); |
| static int pktq_in_index (struct rx_ringbuf *q) LOCKED_FUNC; |
| static void pktq_clear (struct rx_ringbuf *q) LOCKED_FUNC; |
| |
| static struct rx_elem *pktq_in_elem (struct rx_ringbuf *q) LOCKED_FUNC; |
| static struct rx_elem *pktq_out_elem (struct rx_ringbuf *q); |
| |
| #else |
| #define FLUSHK() ((void)0) |
| #define NDIS_NEXT_DEV NULL |
| #endif |
| |
| /* |
| * Internal variables/functions in Watt-32 |
| */ |
| extern WORD _pktdevclass; |
| extern BOOL _eth_is_init; |
| extern int _w32_dynamic_host; |
| extern int _watt_do_exit; |
| extern int _watt_is_init; |
| extern int _w32__bootp_on, _w32__dhcp_on, _w32__rarp_on, _w32__do_mask_req; |
| extern void (*_w32_usr_post_init) (void); |
| extern void (*_w32_print_hook)(); |
| |
| extern void dbug_write (const char *); /* Watt-32 lib, pcdbug.c */ |
| extern int pkt_get_mtu (void); |
| |
| static int ref_count = 0; |
| |
| static u_long mac_count = 0; |
| static u_long filter_count = 0; |
| |
| static volatile BOOL exc_occured = 0; |
| |
| static struct device *handle_to_device [20]; |
| |
| static int pcap_read_dos (pcap_t *p, int cnt, pcap_handler callback, |
| u_char *data); |
| static void pcap_close_dos (pcap_t *p); |
| static int pcap_stats_dos (pcap_t *p, struct pcap_stat *ps); |
| static int pcap_sendpacket_dos (pcap_t *p, const void *buf, size_t len); |
| static int pcap_setfilter_dos (pcap_t *p, struct bpf_program *fp); |
| |
| static int ndis_probe (struct device *dev); |
| static int pkt_probe (struct device *dev); |
| |
| static void close_driver (void); |
| static int init_watt32 (struct pcap *pcap, const char *dev_name, char *err_buf); |
| static int first_init (const char *name, char *ebuf, int promisc); |
| |
| static void watt32_recv_hook (u_char *dummy, const struct pcap_pkthdr *pcap, |
| const u_char *buf); |
| |
| /* |
| * These are the device we always support |
| */ |
| static struct device ndis_dev = { |
| "ndis", |
| "NDIS2 LanManager", |
| 0, |
| 0,0,0,0,0,0, |
| NDIS_NEXT_DEV, /* NULL or a 32-bit device */ |
| ndis_probe |
| }; |
| |
| static struct device pkt_dev = { |
| "pkt", |
| "Packet-Driver", |
| 0, |
| 0,0,0,0,0,0, |
| &ndis_dev, |
| pkt_probe |
| }; |
| |
| static struct device *get_device (int fd) |
| { |
| if (fd <= 0 || fd >= sizeof(handle_to_device)/sizeof(handle_to_device[0])) |
| return (NULL); |
| return handle_to_device [fd-1]; |
| } |
| |
| /* |
| * Open MAC-driver with name 'device_name' for live capture of |
| * network packets. |
| */ |
| pcap_t *pcap_open_live (const char *device_name, int snaplen, int promisc, |
| int timeout_ms, char *errbuf) |
| { |
| struct pcap *pcap; |
| |
| if (snaplen < ETH_MIN) |
| snaplen = ETH_MIN; |
| |
| if (snaplen > ETH_MAX) /* silently accept and truncate large MTUs */ |
| snaplen = ETH_MAX; |
| |
| pcap = calloc (sizeof(*pcap), 1); |
| if (!pcap) |
| { |
| strcpy (errbuf, "Not enough memory (pcap)"); |
| return (NULL); |
| } |
| |
| pcap->snapshot = max (ETH_MIN+8, snaplen); |
| pcap->linktype = DLT_EN10MB; /* !! */ |
| pcap->inter_packet_wait = timeout_ms; |
| pcap->close_op = pcap_close_dos; |
| pcap->read_op = pcap_read_dos; |
| pcap->stats_op = pcap_stats_dos; |
| pcap->inject_op = pcap_sendpacket_dos; |
| pcap->setfilter_op = pcap_setfilter_dos; |
| pcap->setdirection_op = NULL; /* Not implemented.*/ |
| pcap->fd = ++ref_count; |
| |
| if (pcap->fd == 1) /* first time we're called */ |
| { |
| if (!init_watt32(pcap, device_name, errbuf) || |
| !first_init(device_name, errbuf, promisc)) |
| { |
| free (pcap); |
| return (NULL); |
| } |
| atexit (close_driver); |
| } |
| else if (stricmp(active_dev->name,device_name)) |
| { |
| snprintf (errbuf, PCAP_ERRBUF_SIZE, |
| "Cannot use different devices simultaneously " |
| "(`%s' vs. `%s')", active_dev->name, device_name); |
| free (pcap); |
| pcap = NULL; |
| } |
| handle_to_device [pcap->fd-1] = active_dev; |
| return (pcap); |
| } |
| |
| /* |
| * Poll the receiver queue and call the pcap callback-handler |
| * with the packet. |
| */ |
| static int |
| pcap_read_one (pcap_t *p, pcap_handler callback, u_char *data) |
| { |
| struct pcap_pkthdr pcap; |
| struct bpf_insn *fcode = p->fcode.bf_insns; |
| struct timeval now, expiry; |
| BYTE *rx_buf; |
| int rx_len = 0; |
| |
| if (p->inter_packet_wait > 0) |
| { |
| gettimeofday2 (&now, NULL); |
| expiry.tv_usec = now.tv_usec + 1000UL * p->inter_packet_wait; |
| expiry.tv_sec = now.tv_sec; |
| while (expiry.tv_usec >= 1000000L) |
| { |
| expiry.tv_usec -= 1000000L; |
| expiry.tv_sec++; |
| } |
| } |
| |
| while (!exc_occured) |
| { |
| volatile struct device *dev; /* might be reset by sig_handler */ |
| |
| dev = get_device (p->fd); |
| if (!dev) |
| break; |
| |
| PCAP_ASSERT (dev->copy_rx_buf || dev->peek_rx_buf); |
| FLUSHK(); |
| |
| /* If driver has a zero-copy receive facility, peek at the queue, |
| * filter it, do the callback and release the buffer. |
| */ |
| if (dev->peek_rx_buf) |
| { |
| PCAP_ASSERT (dev->release_rx_buf); |
| rx_len = (*dev->peek_rx_buf) (&rx_buf); |
| } |
| else |
| { |
| BYTE buf [ETH_MAX+100]; /* add some margin */ |
| rx_len = (*dev->copy_rx_buf) (buf, p->snapshot); |
| rx_buf = buf; |
| } |
| |
| if (rx_len > 0) /* got a packet */ |
| { |
| mac_count++; |
| |
| FLUSHK(); |
| |
| pcap.caplen = min (rx_len, p->snapshot); |
| pcap.len = rx_len; |
| |
| if (callback && |
| (!fcode || bpf_filter(fcode, rx_buf, pcap.len, pcap.caplen))) |
| { |
| filter_count++; |
| |
| /* Fix-me!! Should be time of arrival. Not time of |
| * capture. |
| */ |
| gettimeofday2 (&pcap.ts, NULL); |
| (*callback) (data, &pcap, rx_buf); |
| } |
| |
| if (dev->release_rx_buf) |
| (*dev->release_rx_buf) (rx_buf); |
| |
| if (pcap_pkt_debug > 0) |
| { |
| if (callback == watt32_recv_hook) |
| dbug_write ("pcap_recv_hook\n"); |
| else dbug_write ("pcap_read_op\n"); |
| } |
| FLUSHK(); |
| return (1); |
| } |
| |
| /* If not to wait for a packet or pcap_close() called from |
| * e.g. SIGINT handler, exit loop now. |
| */ |
| if (p->inter_packet_wait <= 0 || (volatile int)p->fd <= 0) |
| break; |
| |
| gettimeofday2 (&now, NULL); |
| |
| if (timercmp(&now, &expiry, >)) |
| break; |
| |
| #ifndef DJGPP |
| kbhit(); /* a real CPU hog */ |
| #endif |
| |
| if (p->wait_proc) |
| (*p->wait_proc)(); /* call yield func */ |
| } |
| |
| if (rx_len < 0) /* receive error */ |
| { |
| p->md.stat.ps_drop++; |
| #ifdef USE_32BIT_DRIVERS |
| if (pcap_pkt_debug > 1) |
| printk ("pkt-err %s\n", pktInfo.error); |
| #endif |
| return (-1); |
| } |
| return (0); |
| } |
| |
| static int |
| pcap_read_dos (pcap_t *p, int cnt, pcap_handler callback, u_char *data) |
| { |
| int rc, num = 0; |
| |
| while (num <= cnt || (cnt < 0)) |
| { |
| if (p->fd <= 0) |
| return (-1); |
| rc = pcap_read_one (p, callback, data); |
| if (rc > 0) |
| num++; |
| if (rc < 0) |
| break; |
| _w32_os_yield(); /* allow SIGINT generation, yield to Win95/NT */ |
| } |
| return (num); |
| } |
| |
| /* |
| * Return network statistics |
| */ |
| static int pcap_stats_dos (pcap_t *p, struct pcap_stat *ps) |
| { |
| struct net_device_stats *stats; |
| struct device *dev = p ? get_device(p->fd) : NULL; |
| |
| if (!dev) |
| { |
| strcpy (p->errbuf, "illegal pcap handle"); |
| return (-1); |
| } |
| |
| if (!dev->get_stats || (stats = (*dev->get_stats)(dev)) == NULL) |
| { |
| strcpy (p->errbuf, "device statistics not available"); |
| return (-1); |
| } |
| |
| FLUSHK(); |
| |
| p->md.stat.ps_recv = stats->rx_packets; |
| p->md.stat.ps_drop += stats->rx_missed_errors; |
| p->md.stat.ps_ifdrop = stats->rx_dropped + /* queue full */ |
| stats->rx_errors; /* HW errors */ |
| if (ps) |
| *ps = p->md.stat; |
| |
| return (0); |
| } |
| |
| /* |
| * Return detailed network/device statistics. |
| * May be called after 'dev->close' is called. |
| */ |
| int pcap_stats_ex (pcap_t *p, struct pcap_stat_ex *se) |
| { |
| struct device *dev = p ? get_device (p->fd) : NULL; |
| |
| if (!dev || !dev->get_stats) |
| { |
| strlcpy (p->errbuf, "detailed device statistics not available", |
| PCAP_ERRBUF_SIZE); |
| return (-1); |
| } |
| |
| if (!strnicmp(dev->name,"pkt",3)) |
| { |
| strlcpy (p->errbuf, "pktdrvr doesn't have detailed statistics", |
| PCAP_ERRBUF_SIZE); |
| return (-1); |
| } |
| memcpy (se, (*dev->get_stats)(dev), sizeof(*se)); |
| return (0); |
| } |
| |
| /* |
| * Simply store the filter-code for the pcap_read_dos() callback |
| * Some day the filter-code could be handed down to the active |
| * device (pkt_rx1.s or 32-bit device interrupt handler). |
| */ |
| static int pcap_setfilter_dos (pcap_t *p, struct bpf_program *fp) |
| { |
| if (!p) |
| return (-1); |
| p->fcode = *fp; |
| return (0); |
| } |
| |
| /* |
| * Return # of packets received in pcap_read_dos() |
| */ |
| u_long pcap_mac_packets (void) |
| { |
| return (mac_count); |
| } |
| |
| /* |
| * Return # of packets passed through filter in pcap_read_dos() |
| */ |
| u_long pcap_filter_packets (void) |
| { |
| return (filter_count); |
| } |
| |
| /* |
| * Close pcap device. Not called for offline captures. |
| */ |
| static void pcap_close_dos (pcap_t *p) |
| { |
| if (p && !exc_occured) |
| { |
| if (pcap_stats(p,NULL) < 0) |
| p->md.stat.ps_drop = 0; |
| if (!get_device(p->fd)) |
| return; |
| |
| handle_to_device [p->fd-1] = NULL; |
| p->fd = 0; |
| if (ref_count > 0) |
| ref_count--; |
| if (ref_count > 0) |
| return; |
| } |
| close_driver(); |
| } |
| |
| /* |
| * Return the name of the 1st network interface, |
| * or NULL if none can be found. |
| */ |
| char *pcap_lookupdev (char *ebuf) |
| { |
| struct device *dev; |
| |
| #ifdef USE_32BIT_DRIVERS |
| init_32bit(); |
| #endif |
| |
| for (dev = (struct device*)dev_base; dev; dev = dev->next) |
| { |
| PCAP_ASSERT (dev->probe); |
| |
| if ((*dev->probe)(dev)) |
| { |
| FLUSHK(); |
| probed_dev = (struct device*) dev; /* remember last probed device */ |
| return (char*) dev->name; |
| } |
| } |
| |
| if (ebuf) |
| strcpy (ebuf, "No driver found"); |
| return (NULL); |
| } |
| |
| /* |
| * Gets localnet & netmask from Watt-32. |
| */ |
| int pcap_lookupnet (const char *device, bpf_u_int32 *localnet, |
| bpf_u_int32 *netmask, char *errbuf) |
| { |
| if (!_watt_is_init) |
| { |
| strcpy (errbuf, "pcap_open_offline() or pcap_open_live() must be " |
| "called first"); |
| return (-1); |
| } |
| |
| *netmask = _w32_sin_mask; |
| *localnet = my_ip_addr & *netmask; |
| if (*localnet == 0) |
| { |
| if (IN_CLASSA(*netmask)) |
| *localnet = IN_CLASSA_NET; |
| else if (IN_CLASSB(*netmask)) |
| *localnet = IN_CLASSB_NET; |
| else if (IN_CLASSC(*netmask)) |
| *localnet = IN_CLASSC_NET; |
| else |
| { |
| sprintf (errbuf, "inet class for 0x%lx unknown", *netmask); |
| return (-1); |
| } |
| } |
| ARGSUSED (device); |
| return (0); |
| } |
| |
| /* |
| * Get a list of all interfaces that are present and that we probe okay. |
| * Returns -1 on error, 0 otherwise. |
| * The list, as returned through "alldevsp", may be null if no interfaces |
| * were up and could be opened. |
| */ |
| int pcap_findalldevs (pcap_if_t **alldevsp, char *errbuf) |
| { |
| struct device *dev; |
| struct sockaddr_ll sa_ll_1, sa_ll_2; |
| struct sockaddr *addr, *netmask, *broadaddr, *dstaddr; |
| pcap_if_t *devlist = NULL; |
| int ret = 0; |
| size_t addr_size = sizeof(struct sockaddr_ll); |
| |
| for (dev = (struct device*)dev_base; dev; dev = dev->next) |
| { |
| PCAP_ASSERT (dev->probe); |
| |
| if (!(*dev->probe)(dev)) |
| continue; |
| |
| PCAP_ASSERT (dev->close); /* set by probe routine */ |
| FLUSHK(); |
| (*dev->close) (dev); |
| |
| memset (&sa_ll_1, 0, sizeof(sa_ll_1)); |
| memset (&sa_ll_2, 0, sizeof(sa_ll_2)); |
| sa_ll_1.sll_family = AF_PACKET; |
| sa_ll_2.sll_family = AF_PACKET; |
| |
| addr = (struct sockaddr*) &sa_ll_1; |
| netmask = (struct sockaddr*) &sa_ll_1; |
| dstaddr = (struct sockaddr*) &sa_ll_1; |
| broadaddr = (struct sockaddr*) &sa_ll_2; |
| memset (&sa_ll_2.sll_addr, 0xFF, sizeof(sa_ll_2.sll_addr)); |
| |
| if (pcap_add_if(&devlist, dev->name, dev->flags, |
| dev->long_name, errbuf) < 0) |
| { |
| ret = -1; |
| break; |
| } |
| if (add_addr_to_iflist(&devlist,dev->name, dev->flags, addr, addr_size, |
| netmask, addr_size, broadaddr, addr_size, |
| dstaddr, addr_size, errbuf) < 0) |
| { |
| ret = -1; |
| break; |
| } |
| } |
| |
| if (devlist && ret < 0) |
| { |
| pcap_freealldevs (devlist); |
| devlist = NULL; |
| } |
| else |
| if (!devlist) |
| strcpy (errbuf, "No drivers found"); |
| |
| *alldevsp = devlist; |
| return (ret); |
| } |
| |
| /* |
| * pcap_assert() is mainly used for debugging |
| */ |
| void pcap_assert (const char *what, const char *file, unsigned line) |
| { |
| FLUSHK(); |
| fprintf (stderr, "%s (%u): Assertion \"%s\" failed\n", |
| file, line, what); |
| close_driver(); |
| _exit (-1); |
| } |
| |
| /* |
| * For pcap_offline_read(): wait and yield between printing packets |
| * to simulate the pace packets where actually recorded. |
| */ |
| void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait) |
| { |
| if (p) |
| { |
| p->wait_proc = yield; |
| p->inter_packet_wait = wait; |
| } |
| } |
| |
| /* |
| * Initialise a named network device. |
| */ |
| static struct device * |
| open_driver (const char *dev_name, char *ebuf, int promisc) |
| { |
| struct device *dev; |
| |
| for (dev = (struct device*)dev_base; dev; dev = dev->next) |
| { |
| PCAP_ASSERT (dev->name); |
| |
| if (strcmp (dev_name,dev->name)) |
| continue; |
| |
| if (!probed_dev) /* user didn't call pcap_lookupdev() first */ |
| { |
| PCAP_ASSERT (dev->probe); |
| |
| if (!(*dev->probe)(dev)) /* call the xx_probe() function */ |
| { |
| sprintf (ebuf, "failed to detect device `%s'", dev_name); |
| return (NULL); |
| } |
| probed_dev = dev; /* device is probed okay and may be used */ |
| } |
| else if (dev != probed_dev) |
| { |
| goto not_probed; |
| } |
| |
| FLUSHK(); |
| |
| /* Select what traffic to receive |
| */ |
| if (promisc) |
| dev->flags |= (IFF_ALLMULTI | IFF_PROMISC); |
| else dev->flags &= ~(IFF_ALLMULTI | IFF_PROMISC); |
| |
| PCAP_ASSERT (dev->open); |
| |
| if (!(*dev->open)(dev)) |
| { |
| sprintf (ebuf, "failed to activate device `%s'", dev_name); |
| if (pktInfo.error && !strncmp(dev->name,"pkt",3)) |
| { |
| strcat (ebuf, ": "); |
| strcat (ebuf, pktInfo.error); |
| } |
| return (NULL); |
| } |
| |
| /* Some devices need this to operate in promiscous mode |
| */ |
| if (promisc && dev->set_multicast_list) |
| (*dev->set_multicast_list) (dev); |
| |
| active_dev = dev; /* remember our active device */ |
| break; |
| } |
| |
| /* 'dev_name' not matched in 'dev_base' list. |
| */ |
| if (!dev) |
| { |
| sprintf (ebuf, "device `%s' not supported", dev_name); |
| return (NULL); |
| } |
| |
| not_probed: |
| if (!probed_dev) |
| { |
| sprintf (ebuf, "device `%s' not probed", dev_name); |
| return (NULL); |
| } |
| return (dev); |
| } |
| |
| /* |
| * Deinitialise MAC driver. |
| * Set receive mode back to default mode. |
| */ |
| static void close_driver (void) |
| { |
| /* !!todo: loop over all 'handle_to_device[]' ? */ |
| struct device *dev = active_dev; |
| |
| if (dev && dev->close) |
| { |
| (*dev->close) (dev); |
| FLUSHK(); |
| } |
| |
| active_dev = NULL; |
| |
| #ifdef USE_32BIT_DRIVERS |
| if (rx_pool) |
| { |
| k_free (rx_pool); |
| rx_pool = NULL; |
| } |
| if (dev) |
| pcibios_exit(); |
| #endif |
| } |
| |
| |
| #ifdef __DJGPP__ |
| static void setup_signals (void (*handler)(int)) |
| { |
| signal (SIGSEGV,handler); |
| signal (SIGILL, handler); |
| signal (SIGFPE, handler); |
| } |
| |
| static void exc_handler (int sig) |
| { |
| #ifdef USE_32BIT_DRIVERS |
| if (active_dev->irq > 0) /* excludes IRQ 0 */ |
| { |
| disable_irq (active_dev->irq); |
| irq_eoi_cmd (active_dev->irq); |
| _printk_safe = 1; |
| } |
| #endif |
| |
| switch (sig) |
| { |
| case SIGSEGV: |
| fputs ("Catching SIGSEGV.\n", stderr); |
| break; |
| case SIGILL: |
| fputs ("Catching SIGILL.\n", stderr); |
| break; |
| case SIGFPE: |
| _fpreset(); |
| fputs ("Catching SIGFPE.\n", stderr); |
| break; |
| default: |
| fprintf (stderr, "Catching signal %d.\n", sig); |
| } |
| exc_occured = 1; |
| pcap_close_dos (NULL); |
| } |
| #endif /* __DJGPP__ */ |
| |
| |
| /* |
| * Open the pcap device for the first client calling pcap_open_live() |
| */ |
| static int first_init (const char *name, char *ebuf, int promisc) |
| { |
| struct device *dev; |
| |
| #ifdef USE_32BIT_DRIVERS |
| rx_pool = k_calloc (RECEIVE_BUF_SIZE, RECEIVE_QUEUE_SIZE); |
| if (!rx_pool) |
| { |
| strcpy (ebuf, "Not enough memory (Rx pool)"); |
| return (0); |
| } |
| #endif |
| |
| #ifdef __DJGPP__ |
| setup_signals (exc_handler); |
| #endif |
| |
| #ifdef USE_32BIT_DRIVERS |
| init_32bit(); |
| #endif |
| |
| dev = open_driver (name, ebuf, promisc); |
| if (!dev) |
| { |
| #ifdef USE_32BIT_DRIVERS |
| k_free (rx_pool); |
| rx_pool = NULL; |
| #endif |
| |
| #ifdef __DJGPP__ |
| setup_signals (SIG_DFL); |
| #endif |
| return (0); |
| } |
| |
| #ifdef USE_32BIT_DRIVERS |
| /* |
| * If driver is NOT a 16-bit "pkt/ndis" driver (having a 'copy_rx_buf' |
| * set in it's probe handler), initialise near-memory ring-buffer for |
| * the 32-bit device. |
| */ |
| if (dev->copy_rx_buf == NULL) |
| { |
| dev->get_rx_buf = get_rxbuf; |
| dev->peek_rx_buf = peek_rxbuf; |
| dev->release_rx_buf = release_rxbuf; |
| pktq_init (&dev->queue, RECEIVE_BUF_SIZE, RECEIVE_QUEUE_SIZE, rx_pool); |
| } |
| #endif |
| return (1); |
| } |
| |
| #ifdef USE_32BIT_DRIVERS |
| static void init_32bit (void) |
| { |
| static int init_pci = 0; |
| |
| if (!_printk_file) |
| _printk_init (64*1024, NULL); /* calls atexit(printk_exit) */ |
| |
| if (!init_pci) |
| (void)pci_init(); /* init BIOS32+PCI interface */ |
| init_pci = 1; |
| } |
| #endif |
| |
| |
| /* |
| * Hook functions for using Watt-32 together with pcap |
| */ |
| static char rxbuf [ETH_MAX+100]; /* rx-buffer with some margin */ |
| static WORD etype; |
| static pcap_t pcap_save; |
| |
| static void watt32_recv_hook (u_char *dummy, const struct pcap_pkthdr *pcap, |
| const u_char *buf) |
| { |
| /* Fix me: assumes Ethernet II only */ |
| struct ether_header *ep = (struct ether_header*) buf; |
| |
| memcpy (rxbuf, buf, pcap->caplen); |
| etype = ep->ether_type; |
| ARGSUSED (dummy); |
| } |
| |
| #if (WATTCP_VER >= 0x0224) |
| /* |
| * This function is used by Watt-32 to poll for a packet. |
| * i.e. it's set to bypass _eth_arrived() |
| */ |
| static void *pcap_recv_hook (WORD *type) |
| { |
| int len = pcap_read_dos (&pcap_save, 1, watt32_recv_hook, NULL); |
| |
| if (len < 0) |
| return (NULL); |
| |
| *type = etype; |
| return (void*) &rxbuf; |
| } |
| |
| /* |
| * This function is called by Watt-32 (via _eth_xmit_hook). |
| * If dbug_init() was called, we should trace packets sent. |
| */ |
| static int pcap_xmit_hook (const void *buf, unsigned len) |
| { |
| int rc = 0; |
| |
| if (pcap_pkt_debug > 0) |
| dbug_write ("pcap_xmit_hook: "); |
| |
| if (active_dev && active_dev->xmit) |
| if ((*active_dev->xmit) (active_dev, buf, len) > 0) |
| rc = len; |
| |
| if (pcap_pkt_debug > 0) |
| dbug_write (rc ? "ok\n" : "fail\n"); |
| return (rc); |
| } |
| #endif |
| |
| static int pcap_sendpacket_dos (pcap_t *p, const void *buf, size_t len) |
| { |
| struct device *dev = p ? get_device(p->fd) : NULL; |
| |
| if (!dev || !dev->xmit) |
| return (-1); |
| return (*dev->xmit) (dev, buf, len); |
| } |
| |
| /* |
| * This function is called by Watt-32 in tcp_post_init(). |
| * We should prevent Watt-32 from using BOOTP/DHCP/RARP etc. |
| */ |
| static void (*prev_post_hook) (void); |
| |
| static void pcap_init_hook (void) |
| { |
| _w32__bootp_on = _w32__dhcp_on = _w32__rarp_on = 0; |
| _w32__do_mask_req = 0; |
| _w32_dynamic_host = 0; |
| if (prev_post_hook) |
| (*prev_post_hook)(); |
| } |
| |
| /* |
| * Supress PRINT message from Watt-32's sock_init() |
| */ |
| static void null_print (void) {} |
| |
| /* |
| * To use features of Watt-32 (netdb functions and socket etc.) |
| * we must call sock_init(). But we set various hooks to prevent |
| * using normal PKTDRVR functions in pcpkt.c. This should hopefully |
| * make Watt-32 and pcap co-operate. |
| */ |
| static int init_watt32 (struct pcap *pcap, const char *dev_name, char *err_buf) |
| { |
| char *env; |
| int rc, MTU, has_ip_addr; |
| int using_pktdrv = 1; |
| |
| /* If user called sock_init() first, we need to reinit in |
| * order to open debug/trace-file properly |
| */ |
| if (_watt_is_init) |
| sock_exit(); |
| |
| env = getenv ("PCAP_DEBUG"); |
| if (env && atoi(env) > 0 && |
| pcap_pkt_debug < 0) /* if not already set */ |
| { |
| dbug_init(); |
| pcap_pkt_debug = atoi (env); |
| } |
| |
| _watt_do_exit = 0; /* prevent sock_init() calling exit() */ |
| prev_post_hook = _w32_usr_post_init; |
| _w32_usr_post_init = pcap_init_hook; |
| _w32_print_hook = null_print; |
| |
| if (dev_name && strncmp(dev_name,"pkt",3)) |
| using_pktdrv = FALSE; |
| |
| rc = sock_init(); |
| has_ip_addr = (rc != 8); /* IP-address assignment failed */ |
| |
| /* if pcap is using a 32-bit driver w/o a pktdrvr loaded, we |
| * just pretend Watt-32 is initialised okay. |
| * |
| * !! fix-me: The Watt-32 config isn't done if no pktdrvr |
| * was found. In that case my_ip_addr + sin_mask |
| * have default values. Should be taken from another |
| * ini-file/environment in any case (ref. tcpdump.ini) |
| */ |
| _watt_is_init = 1; |
| |
| if (!using_pktdrv || !has_ip_addr) /* for now .... */ |
| { |
| static const char myip[] = "192.168.0.1"; |
| static const char mask[] = "255.255.255.0"; |
| |
| printf ("Just guessing, using IP %s and netmask %s\n", myip, mask); |
| my_ip_addr = aton (myip); |
| _w32_sin_mask = aton (mask); |
| } |
| else if (rc && using_pktdrv) |
| { |
| sprintf (err_buf, "sock_init() failed, code %d", rc); |
| return (0); |
| } |
| |
| /* Set recv-hook for peeking in _eth_arrived(). |
| */ |
| #if (WATTCP_VER >= 0x0224) |
| _eth_recv_hook = pcap_recv_hook; |
| _eth_xmit_hook = pcap_xmit_hook; |
| #endif |
| |
| /* Free the pkt-drvr handle allocated in pkt_init(). |
| * The above hooks should thus use the handle reopened in open_driver() |
| */ |
| if (using_pktdrv) |
| { |
| _eth_release(); |
| /* _eth_is_init = 1; */ /* hack to get Rx/Tx-hooks in Watt-32 working */ |
| } |
| |
| memcpy (&pcap_save, pcap, sizeof(pcap_save)); |
| MTU = pkt_get_mtu(); |
| pcap_save.fcode.bf_insns = NULL; |
| pcap_save.linktype = _eth_get_hwtype (NULL, NULL); |
| pcap_save.snapshot = MTU > 0 ? MTU : ETH_MAX; /* assume 1514 */ |
| |
| #if 1 |
| /* prevent use of resolve() and resolve_ip() |
| */ |
| last_nameserver = 0; |
| #endif |
| return (1); |
| } |
| |
| int EISA_bus = 0; /* Where is natural place for this? */ |
| |
| /* |
| * Application config hooks to set various driver parameters. |
| */ |
| |
| static struct config_table debug_tab[] = { |
| { "PKT.DEBUG", ARG_ATOI, &pcap_pkt_debug }, |
| { "PKT.VECTOR", ARG_ATOX_W, NULL }, |
| { "NDIS.DEBUG", ARG_ATOI, NULL }, |
| #ifdef USE_32BIT_DRIVERS |
| { "3C503.DEBUG", ARG_ATOI, &ei_debug }, |
| { "3C503.IO_BASE", ARG_ATOX_W, &el2_dev.base_addr }, |
| { "3C503.MEMORY", ARG_ATOX_W, &el2_dev.mem_start }, |
| { "3C503.IRQ", ARG_ATOI, &el2_dev.irq }, |
| { "3C505.DEBUG", ARG_ATOI, NULL }, |
| { "3C505.BASE", ARG_ATOX_W, NULL }, |
| { "3C507.DEBUG", ARG_ATOI, NULL }, |
| { "3C509.DEBUG", ARG_ATOI, &el3_debug }, |
| { "3C509.ILOOP", ARG_ATOI, &el3_max_loop }, |
| { "3C529.DEBUG", ARG_ATOI, NULL }, |
| { "3C575.DEBUG", ARG_ATOI, &debug_3c575 }, |
| { "3C59X.DEBUG", ARG_ATOI, &vortex_debug }, |
| { "3C59X.IFACE0", ARG_ATOI, &vortex_options[0] }, |
| { "3C59X.IFACE1", ARG_ATOI, &vortex_options[1] }, |
| { "3C59X.IFACE2", ARG_ATOI, &vortex_options[2] }, |
| { "3C59X.IFACE3", ARG_ATOI, &vortex_options[3] }, |
| { "3C90X.DEBUG", ARG_ATOX_W, &tc90xbc_debug }, |
| { "ACCT.DEBUG", ARG_ATOI, ðpk_debug }, |
| { "CS89.DEBUG", ARG_ATOI, &cs89_debug }, |
| { "RTL8139.DEBUG", ARG_ATOI, &rtl8139_debug }, |
| /* { "RTL8139.FDUPLEX", ARG_ATOI, &rtl8139_options }, */ |
| { "SMC.DEBUG", ARG_ATOI, &ei_debug }, |
| /* { "E100.DEBUG", ARG_ATOI, &e100_debug }, */ |
| { "PCI.DEBUG", ARG_ATOI, &pci_debug }, |
| { "BIOS32.DEBUG", ARG_ATOI, &bios32_debug }, |
| { "IRQ.DEBUG", ARG_ATOI, &irq_debug }, |
| { "TIMER.IRQ", ARG_ATOI, &timer_irq }, |
| #endif |
| { NULL } |
| }; |
| |
| /* |
| * pcap_config_hook() is an extension to application's config |
| * handling. Uses Watt-32's config-table function. |
| */ |
| int pcap_config_hook (const char *name, const char *value) |
| { |
| return parse_config_table (debug_tab, NULL, name, value); |
| } |
| |
| /* |
| * Linked list of supported devices |
| */ |
| struct device *active_dev = NULL; /* the device we have opened */ |
| struct device *probed_dev = NULL; /* the device we have probed */ |
| const struct device *dev_base = &pkt_dev; /* list of network devices */ |
| |
| /* |
| * PKTDRVR device functions |
| */ |
| int pcap_pkt_debug = -1; |
| |
| static void pkt_close (struct device *dev) |
| { |
| BOOL okay = PktExitDriver(); |
| |
| if (pcap_pkt_debug > 1) |
| fprintf (stderr, "pkt_close(): %d\n", okay); |
| |
| if (dev->priv) |
| free (dev->priv); |
| dev->priv = NULL; |
| } |
| |
| static int pkt_open (struct device *dev) |
| { |
| PKT_RX_MODE mode; |
| |
| if (dev->flags & IFF_PROMISC) |
| mode = PDRX_ALL_PACKETS; |
| else mode = PDRX_BROADCAST; |
| |
| if (!PktInitDriver(mode)) |
| return (0); |
| |
| PktResetStatistics (pktInfo.handle); |
| PktQueueBusy (FALSE); |
| return (1); |
| } |
| |
| static int pkt_xmit (struct device *dev, const void *buf, int len) |
| { |
| struct net_device_stats *stats = (struct net_device_stats*) dev->priv; |
| |
| if (pcap_pkt_debug > 0) |
| dbug_write ("pcap_xmit\n"); |
| |
| if (!PktTransmit(buf,len)) |
| { |
| stats->tx_errors++; |
| return (0); |
| } |
| return (len); |
| } |
| |
| static void *pkt_stats (struct device *dev) |
| { |
| struct net_device_stats *stats = (struct net_device_stats*) dev->priv; |
| |
| if (!stats || !PktSessStatistics(pktInfo.handle)) |
| return (NULL); |
| |
| stats->rx_packets = pktStat.inPackets; |
| stats->rx_errors = pktStat.lost; |
| stats->rx_missed_errors = PktRxDropped(); |
| return (stats); |
| } |
| |
| static int pkt_probe (struct device *dev) |
| { |
| if (!PktSearchDriver()) |
| return (0); |
| |
| dev->open = pkt_open; |
| dev->xmit = pkt_xmit; |
| dev->close = pkt_close; |
| dev->get_stats = pkt_stats; |
| dev->copy_rx_buf = PktReceive; /* farmem peek and copy routine */ |
| dev->get_rx_buf = NULL; |
| dev->peek_rx_buf = NULL; |
| dev->release_rx_buf = NULL; |
| dev->priv = calloc (sizeof(struct net_device_stats), 1); |
| if (!dev->priv) |
| return (0); |
| return (1); |
| } |
| |
| /* |
| * NDIS device functions |
| */ |
| static void ndis_close (struct device *dev) |
| { |
| #ifdef USE_NDIS2 |
| NdisShutdown(); |
| #endif |
| ARGSUSED (dev); |
| } |
| |
| static int ndis_open (struct device *dev) |
| { |
| int promis = (dev->flags & IFF_PROMISC); |
| |
| #ifdef USE_NDIS2 |
| if (!NdisInit(promis)) |
| return (0); |
| return (1); |
| #else |
| ARGSUSED (promis); |
| return (0); |
| #endif |
| } |
| |
| static void *ndis_stats (struct device *dev) |
| { |
| static struct net_device_stats stats; |
| |
| /* to-do */ |
| ARGSUSED (dev); |
| return (&stats); |
| } |
| |
| static int ndis_probe (struct device *dev) |
| { |
| #ifdef USE_NDIS2 |
| if (!NdisOpen()) |
| return (0); |
| #endif |
| |
| dev->open = ndis_open; |
| dev->xmit = NULL; |
| dev->close = ndis_close; |
| dev->get_stats = ndis_stats; |
| dev->copy_rx_buf = NULL; /* to-do */ |
| dev->get_rx_buf = NULL; /* upcall is from rmode driver */ |
| dev->peek_rx_buf = NULL; |
| dev->release_rx_buf = NULL; |
| return (0); |
| } |
| |
| /* |
| * Search & probe for supported 32-bit (pmode) pcap devices |
| */ |
| #if defined(USE_32BIT_DRIVERS) |
| |
| struct device el2_dev LOCKED_VAR = { |
| "3c503", |
| "EtherLink II", |
| 0, |
| 0,0,0,0,0,0, |
| NULL, |
| el2_probe |
| }; |
| |
| struct device el3_dev LOCKED_VAR = { |
| "3c509", |
| "EtherLink III", |
| 0, |
| 0,0,0,0,0,0, |
| &el2_dev, |
| el3_probe |
| }; |
| |
| struct device tc515_dev LOCKED_VAR = { |
| "3c515", |
| "EtherLink PCI", |
| 0, |
| 0,0,0,0,0,0, |
| &el3_dev, |
| tc515_probe |
| }; |
| |
| struct device tc59_dev LOCKED_VAR = { |
| "3c59x", |
| "EtherLink PCI", |
| 0, |
| 0,0,0,0,0,0, |
| &tc515_dev, |
| tc59x_probe |
| }; |
| |
| struct device tc90xbc_dev LOCKED_VAR = { |
| "3c90x", |
| "EtherLink 90X", |
| 0, |
| 0,0,0,0,0,0, |
| &tc59_dev, |
| tc90xbc_probe |
| }; |
| |
| struct device wd_dev LOCKED_VAR = { |
| "wd", |
| "Westen Digital", |
| 0, |
| 0,0,0,0,0,0, |
| &tc90xbc_dev, |
| wd_probe |
| }; |
| |
| struct device ne_dev LOCKED_VAR = { |
| "ne", |
| "NEx000", |
| 0, |
| 0,0,0,0,0,0, |
| &wd_dev, |
| ne_probe |
| }; |
| |
| struct device acct_dev LOCKED_VAR = { |
| "acct", |
| "Accton EtherPocket", |
| 0, |
| 0,0,0,0,0,0, |
| &ne_dev, |
| ethpk_probe |
| }; |
| |
| struct device cs89_dev LOCKED_VAR = { |
| "cs89", |
| "Crystal Semiconductor", |
| 0, |
| 0,0,0,0,0,0, |
| &acct_dev, |
| cs89x0_probe |
| }; |
| |
| struct device rtl8139_dev LOCKED_VAR = { |
| "rtl8139", |
| "RealTek PCI", |
| 0, |
| 0,0,0,0,0,0, |
| &cs89_dev, |
| rtl8139_probe /* dev->probe routine */ |
| }; |
| |
| /* |
| * Dequeue routine is called by polling. |
| * NOTE: the queue-element is not copied, only a pointer is |
| * returned at '*buf' |
| */ |
| int peek_rxbuf (BYTE **buf) |
| { |
| struct rx_elem *tail, *head; |
| |
| PCAP_ASSERT (pktq_check (&active_dev->queue)); |
| |
| DISABLE(); |
| tail = pktq_out_elem (&active_dev->queue); |
| head = pktq_in_elem (&active_dev->queue); |
| ENABLE(); |
| |
| if (head != tail) |
| { |
| PCAP_ASSERT (tail->size < active_dev->queue.elem_size-4-2); |
| |
| *buf = &tail->data[0]; |
| return (tail->size); |
| } |
| *buf = NULL; |
| return (0); |
| } |
| |
| /* |
| * Release buffer we peeked at above. |
| */ |
| int release_rxbuf (BYTE *buf) |
| { |
| #ifndef NDEBUG |
| struct rx_elem *tail = pktq_out_elem (&active_dev->queue); |
| |
| PCAP_ASSERT (&tail->data[0] == buf); |
| #else |
| ARGSUSED (buf); |
| #endif |
| pktq_inc_out (&active_dev->queue); |
| return (1); |
| } |
| |
| /* |
| * get_rxbuf() routine (in locked code) is called from IRQ handler |
| * to request a buffer. Interrupts are disabled and we have a 32kB stack. |
| */ |
| BYTE *get_rxbuf (int len) |
| { |
| int idx; |
| |
| if (len < ETH_MIN || len > ETH_MAX) |
| return (NULL); |
| |
| idx = pktq_in_index (&active_dev->queue); |
| |
| #ifdef DEBUG |
| { |
| static int fan_idx LOCKED_VAR = 0; |
| writew ("-\\|/"[fan_idx++] | (15 << 8), /* white on black colour */ |
| 0xB8000 + 2*79); /* upper-right corner, 80-col colour screen */ |
| fan_idx &= 3; |
| } |
| /* writew (idx + '0' + 0x0F00, 0xB8000 + 2*78); */ |
| #endif |
| |
| if (idx != active_dev->queue.out_index) |
| { |
| struct rx_elem *head = pktq_in_elem (&active_dev->queue); |
| |
| head->size = len; |
| active_dev->queue.in_index = idx; |
| return (&head->data[0]); |
| } |
| |
| /* !!to-do: drop 25% of the oldest element |
| */ |
| pktq_clear (&active_dev->queue); |
| return (NULL); |
| } |
| |
| /* |
| * Simple ring-buffer queue handler for reception of packets |
| * from network driver. |
| */ |
| #define PKTQ_MARKER 0xDEADBEEF |
| |
| static int pktq_check (struct rx_ringbuf *q) |
| { |
| #ifndef NDEBUG |
| int i; |
| char *buf; |
| #endif |
| |
| if (!q || !q->num_elem || !q->buf_start) |
| return (0); |
| |
| #ifndef NDEBUG |
| buf = q->buf_start; |
| |
| for (i = 0; i < q->num_elem; i++) |
| { |
| buf += q->elem_size; |
| if (*(DWORD*)(buf - sizeof(DWORD)) != PKTQ_MARKER) |
| return (0); |
| } |
| #endif |
| return (1); |
| } |
| |
| static int pktq_init (struct rx_ringbuf *q, int size, int num, char *pool) |
| { |
| int i; |
| |
| q->elem_size = size; |
| q->num_elem = num; |
| q->buf_start = pool; |
| q->in_index = 0; |
| q->out_index = 0; |
| |
| PCAP_ASSERT (size >= sizeof(struct rx_elem) + sizeof(DWORD)); |
| PCAP_ASSERT (num); |
| PCAP_ASSERT (pool); |
| |
| for (i = 0; i < num; i++) |
| { |
| #if 0 |
| struct rx_elem *elem = (struct rx_elem*) pool; |
| |
| /* assert dword aligned elements |
| */ |
| PCAP_ASSERT (((unsigned)(&elem->data[0]) & 3) == 0); |
| #endif |
| pool += size; |
| *(DWORD*) (pool - sizeof(DWORD)) = PKTQ_MARKER; |
| } |
| return (1); |
| } |
| |
| /* |
| * Increment the queue 'out_index' (tail). |
| * Check for wraps. |
| */ |
| static int pktq_inc_out (struct rx_ringbuf *q) |
| { |
| q->out_index++; |
| if (q->out_index >= q->num_elem) |
| q->out_index = 0; |
| return (q->out_index); |
| } |
| |
| /* |
| * Return the queue's next 'in_index' (head). |
| * Check for wraps. |
| */ |
| static int pktq_in_index (struct rx_ringbuf *q) |
| { |
| volatile int index = q->in_index + 1; |
| |
| if (index >= q->num_elem) |
| index = 0; |
| return (index); |
| } |
| |
| /* |
| * Return the queue's head-buffer. |
| */ |
| static struct rx_elem *pktq_in_elem (struct rx_ringbuf *q) |
| { |
| return (struct rx_elem*) (q->buf_start + (q->elem_size * q->in_index)); |
| } |
| |
| /* |
| * Return the queue's tail-buffer. |
| */ |
| static struct rx_elem *pktq_out_elem (struct rx_ringbuf *q) |
| { |
| return (struct rx_elem*) (q->buf_start + (q->elem_size * q->out_index)); |
| } |
| |
| /* |
| * Clear the queue ring-buffer by setting head=tail. |
| */ |
| static void pktq_clear (struct rx_ringbuf *q) |
| { |
| q->in_index = q->out_index; |
| } |
| |
| /* |
| * Symbols that must be linkable for "gcc -O0" |
| */ |
| #undef __IOPORT_H |
| #undef __DMA_H |
| |
| #define extern |
| #define __inline__ |
| |
| #include "msdos/pm_drvr/ioport.h" |
| #include "msdos/pm_drvr/dma.h" |
| |
| #endif /* USE_32BIT_DRIVERS */ |
| |