| /* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */ |
| /* |
| * Copyright (c) 1994, 1995, 1996, 1997, 1998 |
| * The Regents of the University of California. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * This product includes software developed by the Computer Systems |
| * Engineering Group at Lawrence Berkeley Laboratory. |
| * 4. Neither the name of the University nor of the Laboratory may be used |
| * to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #ifndef lint |
| static const char rcsid[] _U_ = |
| "@(#) $Header: /tcpdump/master/libpcap/fad-gifc.c,v 1.8.2.2 2005/06/29 06:43:31 guy Exp $ (LBL)"; |
| #endif |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| #include <sys/param.h> |
| #include <sys/file.h> |
| #include <sys/ioctl.h> |
| #include <sys/socket.h> |
| #ifdef HAVE_SYS_SOCKIO_H |
| #include <sys/sockio.h> |
| #endif |
| #include <sys/time.h> /* concession to AIX */ |
| |
| struct mbuf; /* Squelch compiler warnings on some platforms for */ |
| struct rtentry; /* declarations in <net/if.h> */ |
| #include <net/if.h> |
| #include <netinet/in.h> |
| |
| #include <ctype.h> |
| #include <errno.h> |
| #include <memory.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| |
| #include "pcap-int.h" |
| |
| #ifdef HAVE_OS_PROTO_H |
| #include "os-proto.h" |
| #endif |
| |
| /* |
| * This is fun. |
| * |
| * In older BSD systems, socket addresses were fixed-length, and |
| * "sizeof (struct sockaddr)" gave the size of the structure. |
| * All addresses fit within a "struct sockaddr". |
| * |
| * In newer BSD systems, the socket address is variable-length, and |
| * there's an "sa_len" field giving the length of the structure; |
| * this allows socket addresses to be longer than 2 bytes of family |
| * and 14 bytes of data. |
| * |
| * Some commercial UNIXes use the old BSD scheme, some use the RFC 2553 |
| * variant of the old BSD scheme (with "struct sockaddr_storage" rather |
| * than "struct sockaddr"), and some use the new BSD scheme. |
| * |
| * Some versions of GNU libc use neither scheme, but has an "SA_LEN()" |
| * macro that determines the size based on the address family. Other |
| * versions don't have "SA_LEN()" (as it was in drafts of RFC 2553 |
| * but not in the final version). |
| * |
| * We assume that a UNIX that doesn't have "getifaddrs()" and doesn't have |
| * SIOCGLIFCONF, but has SIOCGIFCONF, uses "struct sockaddr" for the |
| * address in an entry returned by SIOCGIFCONF. |
| */ |
| #ifndef SA_LEN |
| #ifdef HAVE_SOCKADDR_SA_LEN |
| #define SA_LEN(addr) ((addr)->sa_len) |
| #else /* HAVE_SOCKADDR_SA_LEN */ |
| #define SA_LEN(addr) (sizeof (struct sockaddr)) |
| #endif /* HAVE_SOCKADDR_SA_LEN */ |
| #endif /* SA_LEN */ |
| |
| /* |
| * This is also fun. |
| * |
| * There is no ioctl that returns the amount of space required for all |
| * the data that SIOCGIFCONF could return, and if a buffer is supplied |
| * that's not large enough for all the data SIOCGIFCONF could return, |
| * on at least some platforms it just returns the data that'd fit with |
| * no indication that there wasn't enough room for all the data, much |
| * less an indication of how much more room is required. |
| * |
| * The only way to ensure that we got all the data is to pass a buffer |
| * large enough that the amount of space in the buffer *not* filled in |
| * is greater than the largest possible entry. |
| * |
| * We assume that's "sizeof(ifreq.ifr_name)" plus 255, under the assumption |
| * that no address is more than 255 bytes (on systems where the "sa_len" |
| * field in a "struct sockaddr" is 1 byte, e.g. newer BSDs, that's the |
| * case, and addresses are unlikely to be bigger than that in any case). |
| */ |
| #define MAX_SA_LEN 255 |
| |
| #ifdef HAVE_PROC_NET_DEV |
| /* |
| * Get from "/proc/net/dev" all interfaces listed there; if they're |
| * already in the list of interfaces we have, that won't add another |
| * instance, but if they're not, that'll add them. |
| * |
| * We don't bother getting any addresses for them; it appears you can't |
| * use SIOCGIFADDR on Linux to get IPv6 addresses for interfaces, and, |
| * although some other types of addresses can be fetched with SIOCGIFADDR, |
| * we don't bother with them for now. |
| * |
| * We also don't fail if we couldn't open "/proc/net/dev"; we just leave |
| * the list of interfaces as is. |
| */ |
| static int |
| scan_proc_net_dev(pcap_if_t **devlistp, int fd, char *errbuf) |
| { |
| FILE *proc_net_f; |
| char linebuf[512]; |
| int linenum; |
| unsigned char *p; |
| char name[512]; /* XXX - pick a size */ |
| char *q, *saveq; |
| struct ifreq ifrflags; |
| int ret = 0; |
| |
| proc_net_f = fopen("/proc/net/dev", "r"); |
| if (proc_net_f == NULL) |
| return (0); |
| |
| for (linenum = 1; |
| fgets(linebuf, sizeof linebuf, proc_net_f) != NULL; linenum++) { |
| /* |
| * Skip the first two lines - they're headers. |
| */ |
| if (linenum <= 2) |
| continue; |
| |
| p = &linebuf[0]; |
| |
| /* |
| * Skip leading white space. |
| */ |
| while (*p != '\0' && isspace(*p)) |
| p++; |
| if (*p == '\0' || *p == '\n') |
| continue; /* blank line */ |
| |
| /* |
| * Get the interface name. |
| */ |
| q = &name[0]; |
| while (*p != '\0' && !isspace(*p)) { |
| if (*p == ':') { |
| /* |
| * This could be the separator between a |
| * name and an alias number, or it could be |
| * the separator between a name with no |
| * alias number and the next field. |
| * |
| * If there's a colon after digits, it |
| * separates the name and the alias number, |
| * otherwise it separates the name and the |
| * next field. |
| */ |
| saveq = q; |
| while (isdigit(*p)) |
| *q++ = *p++; |
| if (*p != ':') { |
| /* |
| * That was the next field, |
| * not the alias number. |
| */ |
| q = saveq; |
| } |
| break; |
| } else |
| *q++ = *p++; |
| } |
| *q = '\0'; |
| |
| /* |
| * Get the flags for this interface, and skip it if |
| * it's not up. |
| */ |
| strncpy(ifrflags.ifr_name, name, sizeof(ifrflags.ifr_name)); |
| if (ioctl(fd, SIOCGIFFLAGS, (char *)&ifrflags) < 0) { |
| if (errno == ENXIO) |
| continue; |
| (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, |
| "SIOCGIFFLAGS: %.*s: %s", |
| (int)sizeof(ifrflags.ifr_name), |
| ifrflags.ifr_name, |
| pcap_strerror(errno)); |
| ret = -1; |
| break; |
| } |
| if (!(ifrflags.ifr_flags & IFF_UP)) |
| continue; |
| |
| /* |
| * Add an entry for this interface, with no addresses. |
| */ |
| if (pcap_add_if(devlistp, name, ifrflags.ifr_flags, NULL, |
| errbuf) == -1) { |
| /* |
| * Failure. |
| */ |
| ret = -1; |
| break; |
| } |
| } |
| if (ret != -1) { |
| /* |
| * Well, we didn't fail for any other reason; did we |
| * fail due to an error reading the file? |
| */ |
| if (ferror(proc_net_f)) { |
| (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, |
| "Error reading /proc/net/dev: %s", |
| pcap_strerror(errno)); |
| ret = -1; |
| } |
| } |
| |
| (void)fclose(proc_net_f); |
| return (ret); |
| } |
| #endif /* HAVE_PROC_NET_DEV */ |
| |
| /* |
| * Get a list of all interfaces that are up and that we can open. |
| * Returns -1 on error, 0 otherwise. |
| * The list, as returned through "alldevsp", may be null if no interfaces |
| * were up and could be opened. |
| * |
| * This is the implementation used on platforms that have SIOCGIFCONF but |
| * don't have any other mechanism for getting a list of interfaces. |
| * |
| * XXX - or platforms that have other, better mechanisms but for which |
| * we don't yet have code to use that mechanism; I think there's a better |
| * way on Linux, for example. |
| */ |
| int |
| pcap_findalldevs(pcap_if_t **alldevsp, char *errbuf) |
| { |
| pcap_if_t *devlist = NULL; |
| register int fd; |
| register struct ifreq *ifrp, *ifend, *ifnext; |
| int n; |
| struct ifconf ifc; |
| char *buf = NULL; |
| unsigned buf_size; |
| #if defined (HAVE_SOLARIS) || defined (HAVE_HPUX10_20_OR_LATER) |
| char *p, *q; |
| #endif |
| struct ifreq ifrflags, ifrnetmask, ifrbroadaddr, ifrdstaddr; |
| struct sockaddr *netmask, *broadaddr, *dstaddr; |
| size_t netmask_size, broadaddr_size, dstaddr_size; |
| int ret = 0; |
| |
| /* |
| * Create a socket from which to fetch the list of interfaces. |
| */ |
| fd = socket(AF_INET, SOCK_DGRAM, 0); |
| if (fd < 0) { |
| (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, |
| "socket: %s", pcap_strerror(errno)); |
| return (-1); |
| } |
| |
| /* |
| * Start with an 8K buffer, and keep growing the buffer until |
| * we have more than "sizeof(ifrp->ifr_name) + MAX_SA_LEN" |
| * bytes left over in the buffer or we fail to get the |
| * interface list for some reason other than EINVAL (which is |
| * presumed here to mean "buffer is too small"). |
| */ |
| buf_size = 8192; |
| for (;;) { |
| buf = malloc(buf_size); |
| if (buf == NULL) { |
| (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, |
| "malloc: %s", pcap_strerror(errno)); |
| (void)close(fd); |
| return (-1); |
| } |
| |
| ifc.ifc_len = buf_size; |
| ifc.ifc_buf = buf; |
| memset(buf, 0, buf_size); |
| if (ioctl(fd, SIOCGIFCONF, (char *)&ifc) < 0 |
| && errno != EINVAL) { |
| (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, |
| "SIOCGIFCONF: %s", pcap_strerror(errno)); |
| (void)close(fd); |
| free(buf); |
| return (-1); |
| } |
| if (ifc.ifc_len < buf_size && |
| (buf_size - ifc.ifc_len) > sizeof(ifrp->ifr_name) + MAX_SA_LEN) |
| break; |
| free(buf); |
| buf_size *= 2; |
| } |
| |
| ifrp = (struct ifreq *)buf; |
| ifend = (struct ifreq *)(buf + ifc.ifc_len); |
| |
| for (; ifrp < ifend; ifrp = ifnext) { |
| /* |
| * XXX - what if this isn't an IPv4 address? Can |
| * we still get the netmask, etc. with ioctls on |
| * an IPv4 socket? |
| * |
| * The answer is probably platform-dependent, and |
| * if the answer is "no" on more than one platform, |
| * the way you work around it is probably platform- |
| * dependent as well. |
| */ |
| n = SA_LEN(&ifrp->ifr_addr) + sizeof(ifrp->ifr_name); |
| if (n < sizeof(*ifrp)) |
| ifnext = ifrp + 1; |
| else |
| ifnext = (struct ifreq *)((char *)ifrp + n); |
| |
| /* |
| * XXX - The 32-bit compatibility layer for Linux on IA-64 |
| * is slightly broken. It correctly converts the structures |
| * to and from kernel land from 64 bit to 32 bit but |
| * doesn't update ifc.ifc_len, leaving it larger than the |
| * amount really used. This means we read off the end |
| * of the buffer and encounter an interface with an |
| * "empty" name. Since this is highly unlikely to ever |
| * occur in a valid case we can just finish looking for |
| * interfaces if we see an empty name. |
| */ |
| if (!(*ifrp->ifr_name)) |
| break; |
| |
| /* |
| * Skip entries that begin with "dummy". |
| * XXX - what are these? Is this Linux-specific? |
| * Are there platforms on which we shouldn't do this? |
| */ |
| if (strncmp(ifrp->ifr_name, "dummy", 5) == 0) |
| continue; |
| |
| /* |
| * Get the flags for this interface, and skip it if it's |
| * not up. |
| */ |
| strncpy(ifrflags.ifr_name, ifrp->ifr_name, |
| sizeof(ifrflags.ifr_name)); |
| if (ioctl(fd, SIOCGIFFLAGS, (char *)&ifrflags) < 0) { |
| if (errno == ENXIO) |
| continue; |
| (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, |
| "SIOCGIFFLAGS: %.*s: %s", |
| (int)sizeof(ifrflags.ifr_name), |
| ifrflags.ifr_name, |
| pcap_strerror(errno)); |
| ret = -1; |
| break; |
| } |
| if (!(ifrflags.ifr_flags & IFF_UP)) |
| continue; |
| |
| /* |
| * Get the netmask for this address on this interface. |
| */ |
| strncpy(ifrnetmask.ifr_name, ifrp->ifr_name, |
| sizeof(ifrnetmask.ifr_name)); |
| memcpy(&ifrnetmask.ifr_addr, &ifrp->ifr_addr, |
| sizeof(ifrnetmask.ifr_addr)); |
| if (ioctl(fd, SIOCGIFNETMASK, (char *)&ifrnetmask) < 0) { |
| if (errno == EADDRNOTAVAIL) { |
| /* |
| * Not available. |
| */ |
| netmask = NULL; |
| netmask_size = 0; |
| } else { |
| (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, |
| "SIOCGIFNETMASK: %.*s: %s", |
| (int)sizeof(ifrnetmask.ifr_name), |
| ifrnetmask.ifr_name, |
| pcap_strerror(errno)); |
| ret = -1; |
| break; |
| } |
| } else { |
| netmask = &ifrnetmask.ifr_addr; |
| netmask_size = SA_LEN(netmask); |
| } |
| |
| /* |
| * Get the broadcast address for this address on this |
| * interface (if any). |
| */ |
| if (ifrflags.ifr_flags & IFF_BROADCAST) { |
| strncpy(ifrbroadaddr.ifr_name, ifrp->ifr_name, |
| sizeof(ifrbroadaddr.ifr_name)); |
| memcpy(&ifrbroadaddr.ifr_addr, &ifrp->ifr_addr, |
| sizeof(ifrbroadaddr.ifr_addr)); |
| if (ioctl(fd, SIOCGIFBRDADDR, |
| (char *)&ifrbroadaddr) < 0) { |
| if (errno == EADDRNOTAVAIL) { |
| /* |
| * Not available. |
| */ |
| broadaddr = NULL; |
| broadaddr_size = 0; |
| } else { |
| (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, |
| "SIOCGIFBRDADDR: %.*s: %s", |
| (int)sizeof(ifrbroadaddr.ifr_name), |
| ifrbroadaddr.ifr_name, |
| pcap_strerror(errno)); |
| ret = -1; |
| break; |
| } |
| } else { |
| broadaddr = &ifrbroadaddr.ifr_broadaddr; |
| broadaddr_size = SA_LEN(broadaddr); |
| } |
| } else { |
| /* |
| * Not a broadcast interface, so no broadcast |
| * address. |
| */ |
| broadaddr = NULL; |
| broadaddr_size = 0; |
| } |
| |
| /* |
| * Get the destination address for this address on this |
| * interface (if any). |
| */ |
| if (ifrflags.ifr_flags & IFF_POINTOPOINT) { |
| strncpy(ifrdstaddr.ifr_name, ifrp->ifr_name, |
| sizeof(ifrdstaddr.ifr_name)); |
| memcpy(&ifrdstaddr.ifr_addr, &ifrp->ifr_addr, |
| sizeof(ifrdstaddr.ifr_addr)); |
| if (ioctl(fd, SIOCGIFDSTADDR, |
| (char *)&ifrdstaddr) < 0) { |
| if (errno == EADDRNOTAVAIL) { |
| /* |
| * Not available. |
| */ |
| dstaddr = NULL; |
| dstaddr_size = 0; |
| } else { |
| (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, |
| "SIOCGIFDSTADDR: %.*s: %s", |
| (int)sizeof(ifrdstaddr.ifr_name), |
| ifrdstaddr.ifr_name, |
| pcap_strerror(errno)); |
| ret = -1; |
| break; |
| } |
| } else { |
| dstaddr = &ifrdstaddr.ifr_dstaddr; |
| dstaddr_size = SA_LEN(dstaddr); |
| } |
| } else { |
| /* |
| * Not a point-to-point interface, so no destination |
| * address. |
| */ |
| dstaddr = NULL; |
| dstaddr_size = 0; |
| } |
| |
| #if defined (HAVE_SOLARIS) || defined (HAVE_HPUX10_20_OR_LATER) |
| /* |
| * If this entry has a colon followed by a number at |
| * the end, it's a logical interface. Those are just |
| * the way you assign multiple IP addresses to a real |
| * interface, so an entry for a logical interface should |
| * be treated like the entry for the real interface; |
| * we do that by stripping off the ":" and the number. |
| */ |
| p = strchr(ifrp->ifr_name, ':'); |
| if (p != NULL) { |
| /* |
| * We have a ":"; is it followed by a number? |
| */ |
| q = p + 1; |
| while (isdigit((unsigned char)*q)) |
| q++; |
| if (*q == '\0') { |
| /* |
| * All digits after the ":" until the end. |
| * Strip off the ":" and everything after |
| * it. |
| */ |
| *p = '\0'; |
| } |
| } |
| #endif |
| |
| /* |
| * Add information for this address to the list. |
| */ |
| if (add_addr_to_iflist(&devlist, ifrp->ifr_name, |
| ifrflags.ifr_flags, &ifrp->ifr_addr, |
| SA_LEN(&ifrp->ifr_addr), netmask, netmask_size, |
| broadaddr, broadaddr_size, dstaddr, dstaddr_size, |
| errbuf) < 0) { |
| ret = -1; |
| break; |
| } |
| } |
| free(buf); |
| |
| #ifdef HAVE_PROC_NET_DEV |
| if (ret != -1) { |
| /* |
| * We haven't had any errors yet; now read "/proc/net/dev", |
| * and add to the list of interfaces all interfaces listed |
| * there that we don't already have, because, on Linux, |
| * SIOCGIFCONF reports only interfaces with IPv4 addresses, |
| * so you need to read "/proc/net/dev" to get the names of |
| * the rest of the interfaces. |
| */ |
| ret = scan_proc_net_dev(&devlist, fd, errbuf); |
| } |
| #endif |
| (void)close(fd); |
| |
| if (ret != -1) { |
| /* |
| * We haven't had any errors yet; do any platform-specific |
| * operations to add devices. |
| */ |
| if (pcap_platform_finddevs(&devlist, errbuf) < 0) |
| ret = -1; |
| } |
| |
| if (ret == -1) { |
| /* |
| * We had an error; free the list we've been constructing. |
| */ |
| if (devlist != NULL) { |
| pcap_freealldevs(devlist); |
| devlist = NULL; |
| } |
| } |
| |
| *alldevsp = devlist; |
| return (ret); |
| } |