| # Makefile.in generated by automake 1.10.2 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| subdir = doc |
| DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \ |
| $(srcdir)/Makefile.in |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ |
| $(top_srcdir)/m4/ogg.m4 $(top_srcdir)/m4/pkg.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = Doxyfile |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-dvi-recursive install-exec-recursive \ |
| install-html-recursive install-info-recursive \ |
| install-pdf-recursive install-ps-recursive install-recursive \ |
| installcheck-recursive installdirs-recursive pdf-recursive \ |
| ps-recursive uninstall-recursive |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| am__installdirs = "$(DESTDIR)$(docdir)" |
| docDATA_INSTALL = $(INSTALL_DATA) |
| DATA = $(doc_DATA) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = @ACLOCAL@ |
| ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ |
| ALLOCA = @ALLOCA@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AS = @AS@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEBUG = @DEBUG@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GREP = @GREP@ |
| HAVE_DOXYGEN = @HAVE_DOXYGEN@ |
| HTLATEX = @HTLATEX@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIBTOOL_DEPS = @LIBTOOL_DEPS@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OGG_CFLAGS = @OGG_CFLAGS@ |
| OGG_LIBS = @OGG_LIBS@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PDFLATEX = @PDFLATEX@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| PROFILE = @PROFILE@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| VE_LIB_AGE = @VE_LIB_AGE@ |
| VE_LIB_CURRENT = @VE_LIB_CURRENT@ |
| VE_LIB_REVISION = @VE_LIB_REVISION@ |
| VF_LIB_AGE = @VF_LIB_AGE@ |
| VF_LIB_CURRENT = @VF_LIB_CURRENT@ |
| VF_LIB_REVISION = @VF_LIB_REVISION@ |
| VORBIS_LIBS = @VORBIS_LIBS@ |
| V_LIB_AGE = @V_LIB_AGE@ |
| V_LIB_CURRENT = @V_LIB_CURRENT@ |
| V_LIB_REVISION = @V_LIB_REVISION@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION) |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| lt_ECHO = @lt_ECHO@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| pthread_lib = @pthread_lib@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| SUBDIRS = vorbisfile vorbisenc |
| |
| ### all of the static docs, commited to SVN and included as is |
| static_docs = \ |
| rfc5215.xml \ |
| rfc5215.txt \ |
| eightphase.png \ |
| evenlsp.png \ |
| fish_xiph_org.png \ |
| floor1_inverse_dB_table.html \ |
| floorval.png \ |
| fourphase.png \ |
| framing.html \ |
| helper.html \ |
| index.html \ |
| lspmap.png \ |
| oddlsp.png \ |
| oggstream.html \ |
| programming.html \ |
| squarepolar.png \ |
| stereo.html \ |
| stream.png \ |
| v-comment.html \ |
| vorbis-clip.txt \ |
| vorbis-errors.txt \ |
| vorbis-fidelity.html \ |
| vorbis.html \ |
| vorbisword2.png \ |
| wait.png \ |
| white-xifish.png |
| |
| |
| # bits needed by the spec |
| SPEC_PNG = \ |
| components.png \ |
| floor1-1.png \ |
| floor1-2.png \ |
| floor1-3.png \ |
| floor1-4.png \ |
| hufftree.png \ |
| hufftree-under.png \ |
| residue-pack.png \ |
| residue2.png \ |
| white-xifish.png \ |
| window1.png \ |
| window2.png |
| |
| SPEC_PDF = xifish.pdf |
| |
| # FIXME: also needed here |
| # white-xifish.png |
| SPEC_TEX = \ |
| Vorbis_I_spec.tex \ |
| 01-introduction.tex \ |
| 02-bitpacking.tex \ |
| 03-codebook.tex \ |
| 04-codec.tex \ |
| 05-comment.tex \ |
| 06-floor0.tex \ |
| 07-floor1.tex \ |
| 08-residue.tex \ |
| 09-helper.tex \ |
| 10-tables.tex \ |
| a1-encapsulation-ogg.tex \ |
| a2-encapsulation-rtp.tex \ |
| footer.tex |
| |
| built_docs = Vorbis_I_spec.pdf Vorbis_I_spec.html Vorbis_I_spec.css |
| @BUILD_DOCS_FALSE@doc_DATA = $(static_docs) doxygen-build.stamp |
| |
| # conditionally make the generated documentation |
| @BUILD_DOCS_TRUE@doc_DATA = $(static_docs) $(SPEC_PNG) $(built_docs) doxygen-build.stamp |
| EXTRA_DIST = $(static_docs) $(built_docs) \ |
| $(SPEC_TEX) $(SPEC_PNG) $(SPEC_PDF) Vorbis_I_spec.cfg Doxyfile.in |
| |
| |
| # these are expensive; only remove if we have to |
| MAINTAINERCLEANFILES = $(built_docs) |
| CLEANFILES = $(SPEC_TEX:%.tex=%.aux) \ |
| Vorbis_I_spec.4ct Vorbis_I_spec.4tc \ |
| Vorbis_I_spec.dvi Vorbis_I_spec.idv \ |
| Vorbis_I_spec.lg Vorbis_I_spec.log \ |
| Vorbis_I_spec.out Vorbis_I_spec.tmp \ |
| Vorbis_I_spec.toc Vorbis_I_spec.xref \ |
| Vorbis_I_spec*.png \ |
| zzVorbis_I_spec.ps xifish.png |
| |
| DISTCLEANFILES = $(built_docs) |
| all: all-recursive |
| |
| .SUFFIXES: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu doc/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| install-docDATA: $(doc_DATA) |
| @$(NORMAL_INSTALL) |
| test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)" |
| @list='$(doc_DATA)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ |
| $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ |
| done |
| |
| uninstall-docDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(doc_DATA)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(docdir)/$$f"; \ |
| done |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| $(RECURSIVE_CLEAN_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| distdir=`$(am__cd) $(distdir) && pwd`; \ |
| top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$top_distdir" \ |
| distdir="$$distdir/$$subdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(DATA) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(docdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-data-local install-docDATA |
| |
| install-dvi: install-dvi-recursive |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-info: install-info-recursive |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-ps: install-ps-recursive |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-docDATA uninstall-local |
| |
| .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ |
| install-strip |
| |
| .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| all all-am check check-am clean clean-generic clean-libtool \ |
| clean-local ctags ctags-recursive distclean distclean-generic \ |
| distclean-libtool distclean-tags distdir dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-data-local install-docDATA install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-info install-info-am install-man \ |
| install-pdf install-pdf-am install-ps install-ps-am \ |
| install-strip installcheck installcheck-am installdirs \ |
| installdirs-am maintainer-clean maintainer-clean-generic \ |
| mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ |
| ps ps-am tags tags-recursive uninstall uninstall-am \ |
| uninstall-docDATA uninstall-local |
| |
| |
| # explicit rules for generating docs |
| @BUILD_DOCS_TRUE@xifish.png: white-xifish.png |
| @BUILD_DOCS_TRUE@ cp $< $@ |
| |
| @BUILD_DOCS_TRUE@Vorbis_I_spec.html Vorbis_I_spec.css: $(SPEC_TEX) $(SPEC_PNG) xifish.png |
| @BUILD_DOCS_TRUE@ htlatex $< |
| |
| @BUILD_DOCS_TRUE@Vorbis_I_spec.pdf: $(SPEC_TEX) $(SPEC_PNG) xifish.png |
| @BUILD_DOCS_TRUE@ pdflatex $< |
| @BUILD_DOCS_TRUE@ pdflatex $< |
| @BUILD_DOCS_TRUE@ pdflatex $< |
| @BUILD_DOCS_FALSE@Vorbis_I_spec.html: NO_DOCS_ERROR |
| @BUILD_DOCS_FALSE@Vorbis_I_spec.pdf: NO_DOCS_ERROR |
| @BUILD_DOCS_FALSE@NO_DOCS_ERROR: |
| @BUILD_DOCS_FALSE@ @echo |
| @BUILD_DOCS_FALSE@ @echo "*** Documentation has not been built! ***" |
| @BUILD_DOCS_FALSE@ @echo "Try re-running after passing --enable-docs to configure." |
| @BUILD_DOCS_FALSE@ @echo |
| |
| @HAVE_DOXYGEN_TRUE@doxygen-build.stamp: Doxyfile $(top_srcdir)/include/vorbis/*.h |
| @HAVE_DOXYGEN_TRUE@ doxygen |
| @HAVE_DOXYGEN_TRUE@ touch doxygen-build.stamp |
| @HAVE_DOXYGEN_FALSE@doxygen-build.stamp: |
| @HAVE_DOXYGEN_FALSE@ echo "*** Warning: Doxygen not found; documentation will not be built." |
| @HAVE_DOXYGEN_FALSE@ touch doxygen-build.stamp |
| |
| install-data-local: doxygen-build.stamp |
| $(mkinstalldirs) $(DESTDIR)$(docdir) |
| if test -d vorbis; then \ |
| for dir in vorbis/*; do \ |
| if test -d $$dir; then \ |
| b=`basename $$dir`; \ |
| $(mkinstalldirs) $(DESTDIR)$(docdir)/$$b; \ |
| for f in $$dir/*; do \ |
| $(INSTALL_DATA) $$f $(DESTDIR)$(docdir)/$$b; \ |
| done \ |
| fi \ |
| done \ |
| fi |
| |
| uninstall-local: |
| rm -rf $(DESTDIR)$(docdir) |
| |
| clean-local: |
| if test -d vorbis; then rm -rf vorbis; fi |
| if test -f doxygen-build.stamp; then rm -f doxygen-build.stamp; fi |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
