| ; |
| ; Copyright (c) 2010 The WebM project authors. All Rights Reserved. |
| ; |
| ; Use of this source code is governed by a BSD-style license |
| ; that can be found in the LICENSE file in the root of the source |
| ; tree. An additional intellectual property rights grant can be found |
| ; in the file PATENTS. All contributing project authors may |
| ; be found in the AUTHORS file in the root of the source tree. |
| ; |
| |
| |
| EXPORT |vp8_yv12_copy_frame_yonly_neon| |
| EXPORT |vp8_yv12_copy_frame_yonly_no_extend_frame_borders_neon| |
| |
| ARM |
| REQUIRE8 |
| PRESERVE8 |
| |
| INCLUDE asm_com_offsets.asm |
| |
| AREA ||.text||, CODE, READONLY, ALIGN=2 |
| ;void vpxyv12_copy_frame_yonly(YV12_BUFFER_CONFIG *src_ybc, YV12_BUFFER_CONFIG *dst_ybc); |
| ; Note: this is VP8 function, which has border=32 and 16. Internal y_width and y_height |
| ; are always multiples of 16. |
| |
| |vp8_yv12_copy_frame_yonly_neon| PROC |
| push {r4 - r11, lr} |
| vpush {d8 - d15} |
| |
| ldr r4, [r0, #yv12_buffer_config_y_height] |
| ldr r5, [r0, #yv12_buffer_config_y_width] |
| ldr r6, [r0, #yv12_buffer_config_y_stride] |
| ldr r7, [r1, #yv12_buffer_config_y_stride] |
| ldr r2, [r0, #yv12_buffer_config_y_buffer] ;srcptr1 |
| ldr r3, [r1, #yv12_buffer_config_y_buffer] ;dstptr1 |
| |
| ; copy two rows at one time |
| mov lr, r4, lsr #1 |
| |
| cp_src_to_dst_height_loop |
| mov r8, r2 |
| mov r9, r3 |
| add r10, r2, r6 |
| add r11, r3, r7 |
| mov r12, r5, lsr #7 |
| |
| cp_src_to_dst_width_loop |
| vld1.8 {q0, q1}, [r8]! |
| vld1.8 {q8, q9}, [r10]! |
| vld1.8 {q2, q3}, [r8]! |
| vld1.8 {q10, q11}, [r10]! |
| vld1.8 {q4, q5}, [r8]! |
| vld1.8 {q12, q13}, [r10]! |
| vld1.8 {q6, q7}, [r8]! |
| vld1.8 {q14, q15}, [r10]! |
| |
| subs r12, r12, #1 |
| |
| vst1.8 {q0, q1}, [r9]! |
| vst1.8 {q8, q9}, [r11]! |
| vst1.8 {q2, q3}, [r9]! |
| vst1.8 {q10, q11}, [r11]! |
| vst1.8 {q4, q5}, [r9]! |
| vst1.8 {q12, q13}, [r11]! |
| vst1.8 {q6, q7}, [r9]! |
| vst1.8 {q14, q15}, [r11]! |
| |
| bne cp_src_to_dst_width_loop |
| |
| subs lr, lr, #1 |
| add r2, r2, r6, lsl #1 |
| add r3, r3, r7, lsl #1 |
| |
| bne cp_src_to_dst_height_loop |
| |
| ands r10, r5, #0x7f ;check to see if extra copy is needed |
| sub r11, r5, r10 |
| ldr r2, [r0, #yv12_buffer_config_y_buffer] ;srcptr1 |
| ldr r3, [r1, #yv12_buffer_config_y_buffer] ;dstptr1 |
| bne extra_cp_src_to_dst_width |
| end_of_cp_src_to_dst |
| |
| |
| ;vpxyv12_extend_frame_borders_yonly |
| mov r0, r1 |
| ;Not need to load y_width, since: y_width = y_stride - 2*border |
| ldr r3, [r0, #yv12_buffer_config_border] |
| ldr r1, [r0, #yv12_buffer_config_y_buffer] ;srcptr1 |
| ldr r4, [r0, #yv12_buffer_config_y_height] |
| ldr lr, [r0, #yv12_buffer_config_y_stride] |
| |
| cmp r3, #16 |
| beq b16_extend_frame_borders |
| |
| ;======================= |
| b32_extend_frame_borders |
| ;border = 32 |
| ;======================= |
| ;Border copy for Y plane |
| ;copy the left and right most columns out |
| sub r5, r1, r3 ;destptr1 |
| add r6, r1, lr |
| sub r6, r6, r3, lsl #1 ;destptr2 |
| sub r2, r6, #1 ;srcptr2 |
| |
| ;Do four rows at one time |
| mov r12, r4, lsr #2 |
| |
| copy_left_right_y |
| vld1.8 {d0[], d1[]}, [r1], lr |
| vld1.8 {d4[], d5[]}, [r2], lr |
| vld1.8 {d8[], d9[]}, [r1], lr |
| vld1.8 {d12[], d13[]}, [r2], lr |
| vld1.8 {d16[], d17[]}, [r1], lr |
| vld1.8 {d20[], d21[]}, [r2], lr |
| vld1.8 {d24[], d25[]}, [r1], lr |
| vld1.8 {d28[], d29[]}, [r2], lr |
| |
| vmov q1, q0 |
| vmov q3, q2 |
| vmov q5, q4 |
| vmov q7, q6 |
| vmov q9, q8 |
| vmov q11, q10 |
| vmov q13, q12 |
| vmov q15, q14 |
| |
| subs r12, r12, #1 |
| |
| vst1.8 {q0, q1}, [r5], lr |
| vst1.8 {q2, q3}, [r6], lr |
| vst1.8 {q4, q5}, [r5], lr |
| vst1.8 {q6, q7}, [r6], lr |
| vst1.8 {q8, q9}, [r5], lr |
| vst1.8 {q10, q11}, [r6], lr |
| vst1.8 {q12, q13}, [r5], lr |
| vst1.8 {q14, q15}, [r6], lr |
| |
| bne copy_left_right_y |
| |
| ;Now copy the top and bottom source lines into each line of the respective borders |
| ldr r7, [r0, #yv12_buffer_config_y_buffer] ;srcptr1 |
| mul r8, r3, lr |
| |
| mov r12, lr, lsr #7 |
| |
| sub r6, r1, r3 ;destptr2 |
| sub r2, r6, lr ;srcptr2 |
| sub r1, r7, r3 ;srcptr1 |
| sub r5, r1, r8 ;destptr1 |
| |
| copy_top_bottom_y |
| vld1.8 {q0, q1}, [r1]! |
| vld1.8 {q8, q9}, [r2]! |
| vld1.8 {q2, q3}, [r1]! |
| vld1.8 {q10, q11}, [r2]! |
| vld1.8 {q4, q5}, [r1]! |
| vld1.8 {q12, q13}, [r2]! |
| vld1.8 {q6, q7}, [r1]! |
| vld1.8 {q14, q15}, [r2]! |
| |
| mov r7, r3 |
| |
| top_bottom_32 |
| subs r7, r7, #1 |
| |
| vst1.8 {q0, q1}, [r5]! |
| vst1.8 {q8, q9}, [r6]! |
| vst1.8 {q2, q3}, [r5]! |
| vst1.8 {q10, q11}, [r6]! |
| vst1.8 {q4, q5}, [r5]! |
| vst1.8 {q12, q13}, [r6]! |
| vst1.8 {q6, q7}, [r5]! |
| vst1.8 {q14, q15}, [r6]! |
| |
| add r5, r5, lr |
| sub r5, r5, #128 |
| add r6, r6, lr |
| sub r6, r6, #128 |
| |
| bne top_bottom_32 |
| |
| sub r5, r1, r8 |
| add r6, r2, lr |
| |
| subs r12, r12, #1 |
| bne copy_top_bottom_y |
| |
| mov r7, lr, lsr #4 ;check to see if extra copy is needed |
| ands r7, r7, #0x7 |
| bne extra_top_bottom_y |
| end_of_border_copy_y |
| |
| vpop {d8 - d15} |
| pop {r4 - r11, pc} |
| |
| ;===================== |
| ;extra copy part for Y |
| extra_top_bottom_y |
| vld1.8 {q0}, [r1]! |
| vld1.8 {q2}, [r2]! |
| |
| mov r9, r3, lsr #3 |
| |
| extra_top_bottom_32 |
| subs r9, r9, #1 |
| |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| bne extra_top_bottom_32 |
| |
| sub r5, r1, r8 |
| add r6, r2, lr |
| subs r7, r7, #1 |
| bne extra_top_bottom_y |
| |
| b end_of_border_copy_y |
| |
| |
| ;======================= |
| b16_extend_frame_borders |
| ;border = 16 |
| ;======================= |
| ;Border copy for Y plane |
| ;copy the left and right most columns out |
| sub r5, r1, r3 ;destptr1 |
| add r6, r1, lr |
| sub r6, r6, r3, lsl #1 ;destptr2 |
| sub r2, r6, #1 ;srcptr2 |
| |
| ;Do four rows at one time |
| mov r12, r4, lsr #2 |
| |
| copy_left_right_y_b16 |
| vld1.8 {d0[], d1[]}, [r1], lr |
| vld1.8 {d4[], d5[]}, [r2], lr |
| vld1.8 {d8[], d9[]}, [r1], lr |
| vld1.8 {d12[], d13[]}, [r2], lr |
| vld1.8 {d16[], d17[]}, [r1], lr |
| vld1.8 {d20[], d21[]}, [r2], lr |
| vld1.8 {d24[], d25[]}, [r1], lr |
| vld1.8 {d28[], d29[]}, [r2], lr |
| |
| subs r12, r12, #1 |
| |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q4}, [r5], lr |
| vst1.8 {q6}, [r6], lr |
| vst1.8 {q8}, [r5], lr |
| vst1.8 {q10}, [r6], lr |
| vst1.8 {q12}, [r5], lr |
| vst1.8 {q14}, [r6], lr |
| |
| bne copy_left_right_y_b16 |
| |
| ;Now copy the top and bottom source lines into each line of the respective borders |
| ldr r7, [r0, #yv12_buffer_config_y_buffer] ;srcptr1 |
| mul r8, r3, lr |
| |
| mov r12, lr, lsr #7 |
| |
| sub r6, r1, r3 ;destptr2 |
| sub r2, r6, lr ;srcptr2 |
| sub r1, r7, r3 ;srcptr1 |
| sub r5, r1, r8 ;destptr1 |
| |
| copy_top_bottom_y_b16 |
| vld1.8 {q0, q1}, [r1]! |
| vld1.8 {q8, q9}, [r2]! |
| vld1.8 {q2, q3}, [r1]! |
| vld1.8 {q10, q11}, [r2]! |
| vld1.8 {q4, q5}, [r1]! |
| vld1.8 {q12, q13}, [r2]! |
| vld1.8 {q6, q7}, [r1]! |
| vld1.8 {q14, q15}, [r2]! |
| |
| mov r7, r3 |
| |
| top_bottom_16_b16 |
| subs r7, r7, #1 |
| |
| vst1.8 {q0, q1}, [r5]! |
| vst1.8 {q8, q9}, [r6]! |
| vst1.8 {q2, q3}, [r5]! |
| vst1.8 {q10, q11}, [r6]! |
| vst1.8 {q4, q5}, [r5]! |
| vst1.8 {q12, q13}, [r6]! |
| vst1.8 {q6, q7}, [r5]! |
| vst1.8 {q14, q15}, [r6]! |
| |
| add r5, r5, lr |
| sub r5, r5, #128 |
| add r6, r6, lr |
| sub r6, r6, #128 |
| |
| bne top_bottom_16_b16 |
| |
| sub r5, r1, r8 |
| add r6, r2, lr |
| |
| subs r12, r12, #1 |
| bne copy_top_bottom_y_b16 |
| |
| mov r7, lr, lsr #4 ;check to see if extra copy is needed |
| ands r7, r7, #0x7 |
| bne extra_top_bottom_y_b16 |
| end_of_border_copy_y_b16 |
| |
| vpop {d8 - d15} |
| pop {r4 - r11, pc} |
| |
| ;===================== |
| ;extra copy part for Y |
| extra_top_bottom_y_b16 |
| vld1.8 {q0}, [r1]! |
| vld1.8 {q2}, [r2]! |
| |
| mov r9, r3, lsr #3 |
| |
| extra_top_bottom_16_b16 |
| subs r9, r9, #1 |
| |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| vst1.8 {q0}, [r5], lr |
| vst1.8 {q2}, [r6], lr |
| bne extra_top_bottom_16_b16 |
| |
| sub r5, r1, r8 |
| add r6, r2, lr |
| subs r7, r7, #1 |
| bne extra_top_bottom_y_b16 |
| |
| b end_of_border_copy_y_b16 |
| |
| ;============================= |
| extra_cp_src_to_dst_width |
| add r2, r2, r11 |
| add r3, r3, r11 |
| add r0, r8, r6 |
| add r11, r9, r7 |
| |
| mov lr, r4, lsr #1 |
| extra_cp_src_to_dst_height_loop |
| mov r8, r2 |
| mov r9, r3 |
| add r0, r8, r6 |
| add r11, r9, r7 |
| |
| mov r12, r10 |
| |
| extra_cp_src_to_dst_width_loop |
| vld1.8 {q0}, [r8]! |
| vld1.8 {q1}, [r0]! |
| |
| subs r12, r12, #16 |
| |
| vst1.8 {q0}, [r9]! |
| vst1.8 {q1}, [r11]! |
| bne extra_cp_src_to_dst_width_loop |
| |
| subs lr, lr, #1 |
| |
| add r2, r2, r6, lsl #1 |
| add r3, r3, r7, lsl #1 |
| |
| bne extra_cp_src_to_dst_height_loop |
| |
| b end_of_cp_src_to_dst |
| |
| ENDP |
| |
| ;=========================================================== |
| ;In vp8cx_pick_filter_level(), call vp8_yv12_copy_frame_yonly |
| ;without extend_frame_borders. |
| |vp8_yv12_copy_frame_yonly_no_extend_frame_borders_neon| PROC |
| push {r4 - r11, lr} |
| vpush {d8-d15} |
| |
| ldr r4, [r0, #yv12_buffer_config_y_height] |
| ldr r5, [r0, #yv12_buffer_config_y_width] |
| ldr r6, [r0, #yv12_buffer_config_y_stride] |
| ldr r7, [r1, #yv12_buffer_config_y_stride] |
| ldr r2, [r0, #yv12_buffer_config_y_buffer] ;srcptr1 |
| ldr r3, [r1, #yv12_buffer_config_y_buffer] ;dstptr1 |
| |
| ; copy two rows at one time |
| mov lr, r4, lsr #1 |
| |
| cp_src_to_dst_height_loop1 |
| mov r8, r2 |
| mov r9, r3 |
| add r10, r2, r6 |
| add r11, r3, r7 |
| mov r12, r5, lsr #7 |
| |
| cp_src_to_dst_width_loop1 |
| vld1.8 {q0, q1}, [r8]! |
| vld1.8 {q8, q9}, [r10]! |
| vld1.8 {q2, q3}, [r8]! |
| vld1.8 {q10, q11}, [r10]! |
| vld1.8 {q4, q5}, [r8]! |
| vld1.8 {q12, q13}, [r10]! |
| vld1.8 {q6, q7}, [r8]! |
| vld1.8 {q14, q15}, [r10]! |
| |
| subs r12, r12, #1 |
| |
| vst1.8 {q0, q1}, [r9]! |
| vst1.8 {q8, q9}, [r11]! |
| vst1.8 {q2, q3}, [r9]! |
| vst1.8 {q10, q11}, [r11]! |
| vst1.8 {q4, q5}, [r9]! |
| vst1.8 {q12, q13}, [r11]! |
| vst1.8 {q6, q7}, [r9]! |
| vst1.8 {q14, q15}, [r11]! |
| |
| bne cp_src_to_dst_width_loop1 |
| |
| subs lr, lr, #1 |
| add r2, r2, r6, lsl #1 |
| add r3, r3, r7, lsl #1 |
| |
| bne cp_src_to_dst_height_loop1 |
| |
| ands r10, r5, #0x7f ;check to see if extra copy is needed |
| sub r11, r5, r10 |
| ldr r2, [r0, #yv12_buffer_config_y_buffer] ;srcptr1 |
| ldr r3, [r1, #yv12_buffer_config_y_buffer] ;dstptr1 |
| bne extra_cp_src_to_dst_width1 |
| end_of_cp_src_to_dst1 |
| |
| vpop {d8 - d15} |
| pop {r4-r11, pc} |
| |
| ;============================= |
| extra_cp_src_to_dst_width1 |
| add r2, r2, r11 |
| add r3, r3, r11 |
| add r0, r8, r6 |
| add r11, r9, r7 |
| |
| mov lr, r4, lsr #1 |
| extra_cp_src_to_dst_height_loop1 |
| mov r8, r2 |
| mov r9, r3 |
| add r0, r8, r6 |
| add r11, r9, r7 |
| |
| mov r12, r10 |
| |
| extra_cp_src_to_dst_width_loop1 |
| vld1.8 {q0}, [r8]! |
| vld1.8 {q1}, [r0]! |
| |
| subs r12, r12, #16 |
| |
| vst1.8 {q0}, [r9]! |
| vst1.8 {q1}, [r11]! |
| bne extra_cp_src_to_dst_width_loop1 |
| |
| subs lr, lr, #1 |
| |
| add r2, r2, r6, lsl #1 |
| add r3, r3, r7, lsl #1 |
| |
| bne extra_cp_src_to_dst_height_loop1 |
| |
| b end_of_cp_src_to_dst1 |
| |
| ENDP |
| |
| END |