| ; RUN: opt < %s -indvars -S | FileCheck %s |
| ; |
| ; PR1301 |
| |
| ; Do a bunch of analysis and prove that the loops can use an i32 trip |
| ; count without casting. |
| ; |
| ; Note that all four functions should actually be converted to |
| ; memset. However, this test case validates indvars behavior. We |
| ; don't check that phis are "folded together" because that is a job |
| ; for loop strength reduction. But indvars must remove sext, zext, and add i8. |
| ; |
| ; CHECK-NOT: {{sext|zext|add i8}} |
| |
| ; ModuleID = 'ada.bc' |
| target datalayout = "e-p:32:32:32-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:32:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32" |
| target triple = "i686-pc-linux-gnu" |
| |
| define void @kinds__sbytezero([256 x i32]* nocapture %a) nounwind { |
| bb.thread: |
| %tmp46 = getelementptr [256 x i32]* %a, i32 0, i32 0 ; <i32*> [#uses=1] |
| store i32 0, i32* %tmp46 |
| br label %bb |
| |
| bb: ; preds = %bb, %bb.thread |
| %i.0.reg2mem.0 = phi i8 [ -128, %bb.thread ], [ %tmp8, %bb ] ; <i8> [#uses=1] |
| %tmp8 = add i8 %i.0.reg2mem.0, 1 ; <i8> [#uses=3] |
| %tmp1 = sext i8 %tmp8 to i32 ; <i32> [#uses=1] |
| %tmp3 = add i32 %tmp1, 128 ; <i32> [#uses=1] |
| %tmp4 = getelementptr [256 x i32]* %a, i32 0, i32 %tmp3 ; <i32*> [#uses=1] |
| store i32 0, i32* %tmp4 |
| %0 = icmp eq i8 %tmp8, 127 ; <i1> [#uses=1] |
| br i1 %0, label %return, label %bb |
| |
| return: ; preds = %bb |
| ret void |
| } |
| |
| define void @kinds__ubytezero([256 x i32]* nocapture %a) nounwind { |
| bb.thread: |
| %tmp35 = getelementptr [256 x i32]* %a, i32 0, i32 0 ; <i32*> [#uses=1] |
| store i32 0, i32* %tmp35 |
| br label %bb |
| |
| bb: ; preds = %bb, %bb.thread |
| %i.0.reg2mem.0 = phi i8 [ 0, %bb.thread ], [ %tmp7, %bb ] ; <i8> [#uses=1] |
| %tmp7 = add i8 %i.0.reg2mem.0, 1 ; <i8> [#uses=3] |
| %tmp1 = zext i8 %tmp7 to i32 ; <i32> [#uses=1] |
| %tmp3 = getelementptr [256 x i32]* %a, i32 0, i32 %tmp1 ; <i32*> [#uses=1] |
| store i32 0, i32* %tmp3 |
| %0 = icmp eq i8 %tmp7, -1 ; <i1> [#uses=1] |
| br i1 %0, label %return, label %bb |
| |
| return: ; preds = %bb |
| ret void |
| } |
| |
| define void @kinds__srangezero([21 x i32]* nocapture %a) nounwind { |
| bb.thread: |
| br label %bb |
| |
| bb: ; preds = %bb, %bb.thread |
| %i.0.reg2mem.0 = phi i8 [ -10, %bb.thread ], [ %tmp7, %bb ] ; <i8> [#uses=2] |
| %tmp12 = sext i8 %i.0.reg2mem.0 to i32 ; <i32> [#uses=1] |
| %tmp4 = add i32 %tmp12, 10 ; <i32> [#uses=1] |
| %tmp5 = getelementptr [21 x i32]* %a, i32 0, i32 %tmp4 ; <i32*> [#uses=1] |
| store i32 0, i32* %tmp5 |
| %tmp7 = add i8 %i.0.reg2mem.0, 1 ; <i8> [#uses=2] |
| %0 = icmp sgt i8 %tmp7, 10 ; <i1> [#uses=1] |
| br i1 %0, label %return, label %bb |
| |
| return: ; preds = %bb |
| ret void |
| } |
| |
| define void @kinds__urangezero([21 x i32]* nocapture %a) nounwind { |
| bb.thread: |
| br label %bb |
| |
| bb: ; preds = %bb, %bb.thread |
| %i.0.reg2mem.0 = phi i8 [ 10, %bb.thread ], [ %tmp7, %bb ] ; <i8> [#uses=2] |
| %tmp12 = sext i8 %i.0.reg2mem.0 to i32 ; <i32> [#uses=1] |
| %tmp4 = add i32 %tmp12, -10 ; <i32> [#uses=1] |
| %tmp5 = getelementptr [21 x i32]* %a, i32 0, i32 %tmp4 ; <i32*> [#uses=1] |
| store i32 0, i32* %tmp5 |
| %tmp7 = add i8 %i.0.reg2mem.0, 1 ; <i8> [#uses=2] |
| %0 = icmp sgt i8 %tmp7, 30 ; <i1> [#uses=1] |
| br i1 %0, label %return, label %bb |
| |
| return: ; preds = %bb |
| ret void |
| } |