| /* ssl/t1_lib.c */ |
| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| |
| #include <stdio.h> |
| #include <openssl/objects.h> |
| #include <openssl/evp.h> |
| #include <openssl/hmac.h> |
| #include <openssl/ocsp.h> |
| #include <openssl/rand.h> |
| #include "ssl_locl.h" |
| |
| const char tls1_version_str[]="TLSv1" OPENSSL_VERSION_PTEXT; |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| static int tls_decrypt_ticket(SSL *s, const unsigned char *tick, int ticklen, |
| const unsigned char *sess_id, int sesslen, |
| SSL_SESSION **psess); |
| #endif |
| |
| SSL3_ENC_METHOD TLSv1_enc_data={ |
| tls1_enc, |
| tls1_mac, |
| tls1_setup_key_block, |
| tls1_generate_master_secret, |
| tls1_change_cipher_state, |
| tls1_final_finish_mac, |
| TLS1_FINISH_MAC_LENGTH, |
| tls1_cert_verify_mac, |
| TLS_MD_CLIENT_FINISH_CONST,TLS_MD_CLIENT_FINISH_CONST_SIZE, |
| TLS_MD_SERVER_FINISH_CONST,TLS_MD_SERVER_FINISH_CONST_SIZE, |
| tls1_alert_code, |
| tls1_export_keying_material, |
| }; |
| |
| long tls1_default_timeout(void) |
| { |
| /* 2 hours, the 24 hours mentioned in the TLSv1 spec |
| * is way too long for http, the cache would over fill */ |
| return(60*60*2); |
| } |
| |
| int tls1_new(SSL *s) |
| { |
| if (!ssl3_new(s)) return(0); |
| s->method->ssl_clear(s); |
| return(1); |
| } |
| |
| void tls1_free(SSL *s) |
| { |
| #ifndef OPENSSL_NO_TLSEXT |
| if (s->tlsext_session_ticket) |
| { |
| OPENSSL_free(s->tlsext_session_ticket); |
| } |
| #endif /* OPENSSL_NO_TLSEXT */ |
| ssl3_free(s); |
| } |
| |
| void tls1_clear(SSL *s) |
| { |
| ssl3_clear(s); |
| s->version = s->method->version; |
| } |
| |
| #ifndef OPENSSL_NO_EC |
| |
| static int nid_list[] = |
| { |
| NID_sect163k1, /* sect163k1 (1) */ |
| NID_sect163r1, /* sect163r1 (2) */ |
| NID_sect163r2, /* sect163r2 (3) */ |
| NID_sect193r1, /* sect193r1 (4) */ |
| NID_sect193r2, /* sect193r2 (5) */ |
| NID_sect233k1, /* sect233k1 (6) */ |
| NID_sect233r1, /* sect233r1 (7) */ |
| NID_sect239k1, /* sect239k1 (8) */ |
| NID_sect283k1, /* sect283k1 (9) */ |
| NID_sect283r1, /* sect283r1 (10) */ |
| NID_sect409k1, /* sect409k1 (11) */ |
| NID_sect409r1, /* sect409r1 (12) */ |
| NID_sect571k1, /* sect571k1 (13) */ |
| NID_sect571r1, /* sect571r1 (14) */ |
| NID_secp160k1, /* secp160k1 (15) */ |
| NID_secp160r1, /* secp160r1 (16) */ |
| NID_secp160r2, /* secp160r2 (17) */ |
| NID_secp192k1, /* secp192k1 (18) */ |
| NID_X9_62_prime192v1, /* secp192r1 (19) */ |
| NID_secp224k1, /* secp224k1 (20) */ |
| NID_secp224r1, /* secp224r1 (21) */ |
| NID_secp256k1, /* secp256k1 (22) */ |
| NID_X9_62_prime256v1, /* secp256r1 (23) */ |
| NID_secp384r1, /* secp384r1 (24) */ |
| NID_secp521r1 /* secp521r1 (25) */ |
| }; |
| |
| static int pref_list[] = |
| { |
| NID_sect571r1, /* sect571r1 (14) */ |
| NID_sect571k1, /* sect571k1 (13) */ |
| NID_secp521r1, /* secp521r1 (25) */ |
| NID_sect409k1, /* sect409k1 (11) */ |
| NID_sect409r1, /* sect409r1 (12) */ |
| NID_secp384r1, /* secp384r1 (24) */ |
| NID_sect283k1, /* sect283k1 (9) */ |
| NID_sect283r1, /* sect283r1 (10) */ |
| NID_secp256k1, /* secp256k1 (22) */ |
| NID_X9_62_prime256v1, /* secp256r1 (23) */ |
| NID_sect239k1, /* sect239k1 (8) */ |
| NID_sect233k1, /* sect233k1 (6) */ |
| NID_sect233r1, /* sect233r1 (7) */ |
| NID_secp224k1, /* secp224k1 (20) */ |
| NID_secp224r1, /* secp224r1 (21) */ |
| NID_sect193r1, /* sect193r1 (4) */ |
| NID_sect193r2, /* sect193r2 (5) */ |
| NID_secp192k1, /* secp192k1 (18) */ |
| NID_X9_62_prime192v1, /* secp192r1 (19) */ |
| NID_sect163k1, /* sect163k1 (1) */ |
| NID_sect163r1, /* sect163r1 (2) */ |
| NID_sect163r2, /* sect163r2 (3) */ |
| NID_secp160k1, /* secp160k1 (15) */ |
| NID_secp160r1, /* secp160r1 (16) */ |
| NID_secp160r2, /* secp160r2 (17) */ |
| }; |
| |
| int tls1_ec_curve_id2nid(int curve_id) |
| { |
| /* ECC curves from draft-ietf-tls-ecc-12.txt (Oct. 17, 2005) */ |
| if ((curve_id < 1) || ((unsigned int)curve_id > |
| sizeof(nid_list)/sizeof(nid_list[0]))) |
| return 0; |
| return nid_list[curve_id-1]; |
| } |
| |
| int tls1_ec_nid2curve_id(int nid) |
| { |
| /* ECC curves from draft-ietf-tls-ecc-12.txt (Oct. 17, 2005) */ |
| switch (nid) |
| { |
| case NID_sect163k1: /* sect163k1 (1) */ |
| return 1; |
| case NID_sect163r1: /* sect163r1 (2) */ |
| return 2; |
| case NID_sect163r2: /* sect163r2 (3) */ |
| return 3; |
| case NID_sect193r1: /* sect193r1 (4) */ |
| return 4; |
| case NID_sect193r2: /* sect193r2 (5) */ |
| return 5; |
| case NID_sect233k1: /* sect233k1 (6) */ |
| return 6; |
| case NID_sect233r1: /* sect233r1 (7) */ |
| return 7; |
| case NID_sect239k1: /* sect239k1 (8) */ |
| return 8; |
| case NID_sect283k1: /* sect283k1 (9) */ |
| return 9; |
| case NID_sect283r1: /* sect283r1 (10) */ |
| return 10; |
| case NID_sect409k1: /* sect409k1 (11) */ |
| return 11; |
| case NID_sect409r1: /* sect409r1 (12) */ |
| return 12; |
| case NID_sect571k1: /* sect571k1 (13) */ |
| return 13; |
| case NID_sect571r1: /* sect571r1 (14) */ |
| return 14; |
| case NID_secp160k1: /* secp160k1 (15) */ |
| return 15; |
| case NID_secp160r1: /* secp160r1 (16) */ |
| return 16; |
| case NID_secp160r2: /* secp160r2 (17) */ |
| return 17; |
| case NID_secp192k1: /* secp192k1 (18) */ |
| return 18; |
| case NID_X9_62_prime192v1: /* secp192r1 (19) */ |
| return 19; |
| case NID_secp224k1: /* secp224k1 (20) */ |
| return 20; |
| case NID_secp224r1: /* secp224r1 (21) */ |
| return 21; |
| case NID_secp256k1: /* secp256k1 (22) */ |
| return 22; |
| case NID_X9_62_prime256v1: /* secp256r1 (23) */ |
| return 23; |
| case NID_secp384r1: /* secp384r1 (24) */ |
| return 24; |
| case NID_secp521r1: /* secp521r1 (25) */ |
| return 25; |
| default: |
| return 0; |
| } |
| } |
| #endif /* OPENSSL_NO_EC */ |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| |
| /* List of supported signature algorithms and hashes. Should make this |
| * customisable at some point, for now include everything we support. |
| */ |
| |
| #ifdef OPENSSL_NO_RSA |
| #define tlsext_sigalg_rsa(md) /* */ |
| #else |
| #define tlsext_sigalg_rsa(md) md, TLSEXT_signature_rsa, |
| #endif |
| |
| #ifdef OPENSSL_NO_DSA |
| #define tlsext_sigalg_dsa(md) /* */ |
| #else |
| #define tlsext_sigalg_dsa(md) md, TLSEXT_signature_dsa, |
| #endif |
| |
| #ifdef OPENSSL_NO_ECDSA |
| #define tlsext_sigalg_ecdsa(md) /* */ |
| #else |
| #define tlsext_sigalg_ecdsa(md) md, TLSEXT_signature_ecdsa, |
| #endif |
| |
| #define tlsext_sigalg(md) \ |
| tlsext_sigalg_rsa(md) \ |
| tlsext_sigalg_dsa(md) \ |
| tlsext_sigalg_ecdsa(md) |
| |
| static unsigned char tls12_sigalgs[] = { |
| #ifndef OPENSSL_NO_SHA512 |
| tlsext_sigalg(TLSEXT_hash_sha512) |
| tlsext_sigalg(TLSEXT_hash_sha384) |
| #endif |
| #ifndef OPENSSL_NO_SHA256 |
| tlsext_sigalg(TLSEXT_hash_sha256) |
| tlsext_sigalg(TLSEXT_hash_sha224) |
| #endif |
| #ifndef OPENSSL_NO_SHA |
| tlsext_sigalg(TLSEXT_hash_sha1) |
| #endif |
| #ifndef OPENSSL_NO_MD5 |
| tlsext_sigalg_rsa(TLSEXT_hash_md5) |
| #endif |
| }; |
| |
| int tls12_get_req_sig_algs(SSL *s, unsigned char *p) |
| { |
| size_t slen = sizeof(tls12_sigalgs); |
| #ifdef OPENSSL_FIPS |
| /* If FIPS mode don't include MD5 which is last */ |
| if (FIPS_mode()) |
| slen -= 2; |
| #endif |
| if (p) |
| memcpy(p, tls12_sigalgs, slen); |
| return (int)slen; |
| } |
| |
| unsigned char *ssl_add_clienthello_tlsext(SSL *s, unsigned char *p, unsigned char *limit) |
| { |
| int extdatalen=0; |
| unsigned char *ret = p; |
| |
| /* don't add extensions for SSLv3 unless doing secure renegotiation */ |
| if (s->client_version == SSL3_VERSION |
| && !s->s3->send_connection_binding) |
| return p; |
| |
| ret+=2; |
| |
| if (ret>=limit) return NULL; /* this really never occurs, but ... */ |
| |
| if (s->tlsext_hostname != NULL) |
| { |
| /* Add TLS extension servername to the Client Hello message */ |
| unsigned long size_str; |
| long lenmax; |
| |
| /* check for enough space. |
| 4 for the servername type and entension length |
| 2 for servernamelist length |
| 1 for the hostname type |
| 2 for hostname length |
| + hostname length |
| */ |
| |
| if ((lenmax = limit - ret - 9) < 0 |
| || (size_str = strlen(s->tlsext_hostname)) > (unsigned long)lenmax) |
| return NULL; |
| |
| /* extension type and length */ |
| s2n(TLSEXT_TYPE_server_name,ret); |
| s2n(size_str+5,ret); |
| |
| /* length of servername list */ |
| s2n(size_str+3,ret); |
| |
| /* hostname type, length and hostname */ |
| *(ret++) = (unsigned char) TLSEXT_NAMETYPE_host_name; |
| s2n(size_str,ret); |
| memcpy(ret, s->tlsext_hostname, size_str); |
| ret+=size_str; |
| } |
| |
| /* Add RI if renegotiating */ |
| if (s->renegotiate) |
| { |
| int el; |
| |
| if(!ssl_add_clienthello_renegotiate_ext(s, 0, &el, 0)) |
| { |
| SSLerr(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| |
| if((limit - p - 4 - el) < 0) return NULL; |
| |
| s2n(TLSEXT_TYPE_renegotiate,ret); |
| s2n(el,ret); |
| |
| if(!ssl_add_clienthello_renegotiate_ext(s, ret, &el, el)) |
| { |
| SSLerr(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| |
| ret += el; |
| } |
| |
| #ifndef OPENSSL_NO_SRP |
| /* Add SRP username if there is one */ |
| if (s->srp_ctx.login != NULL) |
| { /* Add TLS extension SRP username to the Client Hello message */ |
| |
| int login_len = strlen(s->srp_ctx.login); |
| if (login_len > 255 || login_len == 0) |
| { |
| SSLerr(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| |
| /* check for enough space. |
| 4 for the srp type type and entension length |
| 1 for the srp user identity |
| + srp user identity length |
| */ |
| if ((limit - ret - 5 - login_len) < 0) return NULL; |
| |
| /* fill in the extension */ |
| s2n(TLSEXT_TYPE_srp,ret); |
| s2n(login_len+1,ret); |
| (*ret++) = (unsigned char) login_len; |
| memcpy(ret, s->srp_ctx.login, login_len); |
| ret+=login_len; |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_EC |
| if (s->tlsext_ecpointformatlist != NULL && |
| s->version != DTLS1_VERSION) |
| { |
| /* Add TLS extension ECPointFormats to the ClientHello message */ |
| long lenmax; |
| |
| if ((lenmax = limit - ret - 5) < 0) return NULL; |
| if (s->tlsext_ecpointformatlist_length > (unsigned long)lenmax) return NULL; |
| if (s->tlsext_ecpointformatlist_length > 255) |
| { |
| SSLerr(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| |
| s2n(TLSEXT_TYPE_ec_point_formats,ret); |
| s2n(s->tlsext_ecpointformatlist_length + 1,ret); |
| *(ret++) = (unsigned char) s->tlsext_ecpointformatlist_length; |
| memcpy(ret, s->tlsext_ecpointformatlist, s->tlsext_ecpointformatlist_length); |
| ret+=s->tlsext_ecpointformatlist_length; |
| } |
| if (s->tlsext_ellipticcurvelist != NULL && |
| s->version != DTLS1_VERSION) |
| { |
| /* Add TLS extension EllipticCurves to the ClientHello message */ |
| long lenmax; |
| |
| if ((lenmax = limit - ret - 6) < 0) return NULL; |
| if (s->tlsext_ellipticcurvelist_length > (unsigned long)lenmax) return NULL; |
| if (s->tlsext_ellipticcurvelist_length > 65532) |
| { |
| SSLerr(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| |
| s2n(TLSEXT_TYPE_elliptic_curves,ret); |
| s2n(s->tlsext_ellipticcurvelist_length + 2, ret); |
| |
| /* NB: draft-ietf-tls-ecc-12.txt uses a one-byte prefix for |
| * elliptic_curve_list, but the examples use two bytes. |
| * http://www1.ietf.org/mail-archive/web/tls/current/msg00538.html |
| * resolves this to two bytes. |
| */ |
| s2n(s->tlsext_ellipticcurvelist_length, ret); |
| memcpy(ret, s->tlsext_ellipticcurvelist, s->tlsext_ellipticcurvelist_length); |
| ret+=s->tlsext_ellipticcurvelist_length; |
| } |
| #endif /* OPENSSL_NO_EC */ |
| |
| if (!(SSL_get_options(s) & SSL_OP_NO_TICKET)) |
| { |
| int ticklen; |
| if (!s->new_session && s->session && s->session->tlsext_tick) |
| ticklen = s->session->tlsext_ticklen; |
| else if (s->session && s->tlsext_session_ticket && |
| s->tlsext_session_ticket->data) |
| { |
| ticklen = s->tlsext_session_ticket->length; |
| s->session->tlsext_tick = OPENSSL_malloc(ticklen); |
| if (!s->session->tlsext_tick) |
| return NULL; |
| memcpy(s->session->tlsext_tick, |
| s->tlsext_session_ticket->data, |
| ticklen); |
| s->session->tlsext_ticklen = ticklen; |
| } |
| else |
| ticklen = 0; |
| if (ticklen == 0 && s->tlsext_session_ticket && |
| s->tlsext_session_ticket->data == NULL) |
| goto skip_ext; |
| /* Check for enough room 2 for extension type, 2 for len |
| * rest for ticket |
| */ |
| if ((long)(limit - ret - 4 - ticklen) < 0) return NULL; |
| s2n(TLSEXT_TYPE_session_ticket,ret); |
| s2n(ticklen,ret); |
| if (ticklen) |
| { |
| memcpy(ret, s->session->tlsext_tick, ticklen); |
| ret += ticklen; |
| } |
| } |
| skip_ext: |
| |
| if (TLS1_get_client_version(s) >= TLS1_2_VERSION) |
| { |
| if ((size_t)(limit - ret) < sizeof(tls12_sigalgs) + 6) |
| return NULL; |
| s2n(TLSEXT_TYPE_signature_algorithms,ret); |
| s2n(sizeof(tls12_sigalgs) + 2, ret); |
| s2n(sizeof(tls12_sigalgs), ret); |
| memcpy(ret, tls12_sigalgs, sizeof(tls12_sigalgs)); |
| ret += sizeof(tls12_sigalgs); |
| } |
| |
| #ifdef TLSEXT_TYPE_opaque_prf_input |
| if (s->s3->client_opaque_prf_input != NULL && |
| s->version != DTLS1_VERSION) |
| { |
| size_t col = s->s3->client_opaque_prf_input_len; |
| |
| if ((long)(limit - ret - 6 - col < 0)) |
| return NULL; |
| if (col > 0xFFFD) /* can't happen */ |
| return NULL; |
| |
| s2n(TLSEXT_TYPE_opaque_prf_input, ret); |
| s2n(col + 2, ret); |
| s2n(col, ret); |
| memcpy(ret, s->s3->client_opaque_prf_input, col); |
| ret += col; |
| } |
| #endif |
| |
| if (s->tlsext_status_type == TLSEXT_STATUSTYPE_ocsp && |
| s->version != DTLS1_VERSION) |
| { |
| int i; |
| long extlen, idlen, itmp; |
| OCSP_RESPID *id; |
| |
| idlen = 0; |
| for (i = 0; i < sk_OCSP_RESPID_num(s->tlsext_ocsp_ids); i++) |
| { |
| id = sk_OCSP_RESPID_value(s->tlsext_ocsp_ids, i); |
| itmp = i2d_OCSP_RESPID(id, NULL); |
| if (itmp <= 0) |
| return NULL; |
| idlen += itmp + 2; |
| } |
| |
| if (s->tlsext_ocsp_exts) |
| { |
| extlen = i2d_X509_EXTENSIONS(s->tlsext_ocsp_exts, NULL); |
| if (extlen < 0) |
| return NULL; |
| } |
| else |
| extlen = 0; |
| |
| if ((long)(limit - ret - 7 - extlen - idlen) < 0) return NULL; |
| s2n(TLSEXT_TYPE_status_request, ret); |
| if (extlen + idlen > 0xFFF0) |
| return NULL; |
| s2n(extlen + idlen + 5, ret); |
| *(ret++) = TLSEXT_STATUSTYPE_ocsp; |
| s2n(idlen, ret); |
| for (i = 0; i < sk_OCSP_RESPID_num(s->tlsext_ocsp_ids); i++) |
| { |
| /* save position of id len */ |
| unsigned char *q = ret; |
| id = sk_OCSP_RESPID_value(s->tlsext_ocsp_ids, i); |
| /* skip over id len */ |
| ret += 2; |
| itmp = i2d_OCSP_RESPID(id, &ret); |
| /* write id len */ |
| s2n(itmp, q); |
| } |
| s2n(extlen, ret); |
| if (extlen > 0) |
| i2d_X509_EXTENSIONS(s->tlsext_ocsp_exts, &ret); |
| } |
| |
| #ifndef OPENSSL_NO_HEARTBEATS |
| /* Add Heartbeat extension */ |
| s2n(TLSEXT_TYPE_heartbeat,ret); |
| s2n(1,ret); |
| /* Set mode: |
| * 1: peer may send requests |
| * 2: peer not allowed to send requests |
| */ |
| if (s->tlsext_heartbeat & SSL_TLSEXT_HB_DONT_RECV_REQUESTS) |
| *(ret++) = SSL_TLSEXT_HB_DONT_SEND_REQUESTS; |
| else |
| *(ret++) = SSL_TLSEXT_HB_ENABLED; |
| #endif |
| |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| if (s->ctx->next_proto_select_cb && !s->s3->tmp.finish_md_len) |
| { |
| /* The client advertises an emtpy extension to indicate its |
| * support for Next Protocol Negotiation */ |
| if (limit - ret - 4 < 0) |
| return NULL; |
| s2n(TLSEXT_TYPE_next_proto_neg,ret); |
| s2n(0,ret); |
| } |
| #endif |
| |
| if (s->tlsext_channel_id_enabled) |
| { |
| /* The client advertises an emtpy extension to indicate its |
| * support for Channel ID. */ |
| if (limit - ret - 4 < 0) |
| return NULL; |
| s2n(TLSEXT_TYPE_channel_id,ret); |
| s2n(0,ret); |
| } |
| |
| #ifndef OPENSSL_NO_SRTP |
| if(SSL_get_srtp_profiles(s)) |
| { |
| int el; |
| |
| ssl_add_clienthello_use_srtp_ext(s, 0, &el, 0); |
| |
| if((limit - p - 4 - el) < 0) return NULL; |
| |
| s2n(TLSEXT_TYPE_use_srtp,ret); |
| s2n(el,ret); |
| |
| if(ssl_add_clienthello_use_srtp_ext(s, ret, &el, el)) |
| { |
| SSLerr(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| ret += el; |
| } |
| #endif |
| |
| if ((extdatalen = ret-p-2)== 0) |
| return p; |
| |
| s2n(extdatalen,p); |
| return ret; |
| } |
| |
| unsigned char *ssl_add_serverhello_tlsext(SSL *s, unsigned char *p, unsigned char *limit) |
| { |
| int extdatalen=0; |
| unsigned char *ret = p; |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| int next_proto_neg_seen; |
| #endif |
| |
| /* don't add extensions for SSLv3, unless doing secure renegotiation */ |
| if (s->version == SSL3_VERSION && !s->s3->send_connection_binding) |
| return p; |
| |
| ret+=2; |
| if (ret>=limit) return NULL; /* this really never occurs, but ... */ |
| |
| if (!s->hit && s->servername_done == 1 && s->session->tlsext_hostname != NULL) |
| { |
| if ((long)(limit - ret - 4) < 0) return NULL; |
| |
| s2n(TLSEXT_TYPE_server_name,ret); |
| s2n(0,ret); |
| } |
| |
| if(s->s3->send_connection_binding) |
| { |
| int el; |
| |
| if(!ssl_add_serverhello_renegotiate_ext(s, 0, &el, 0)) |
| { |
| SSLerr(SSL_F_SSL_ADD_SERVERHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| |
| if((limit - p - 4 - el) < 0) return NULL; |
| |
| s2n(TLSEXT_TYPE_renegotiate,ret); |
| s2n(el,ret); |
| |
| if(!ssl_add_serverhello_renegotiate_ext(s, ret, &el, el)) |
| { |
| SSLerr(SSL_F_SSL_ADD_SERVERHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| |
| ret += el; |
| } |
| |
| #ifndef OPENSSL_NO_EC |
| if (s->tlsext_ecpointformatlist != NULL && |
| s->version != DTLS1_VERSION) |
| { |
| /* Add TLS extension ECPointFormats to the ServerHello message */ |
| long lenmax; |
| |
| if ((lenmax = limit - ret - 5) < 0) return NULL; |
| if (s->tlsext_ecpointformatlist_length > (unsigned long)lenmax) return NULL; |
| if (s->tlsext_ecpointformatlist_length > 255) |
| { |
| SSLerr(SSL_F_SSL_ADD_SERVERHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| |
| s2n(TLSEXT_TYPE_ec_point_formats,ret); |
| s2n(s->tlsext_ecpointformatlist_length + 1,ret); |
| *(ret++) = (unsigned char) s->tlsext_ecpointformatlist_length; |
| memcpy(ret, s->tlsext_ecpointformatlist, s->tlsext_ecpointformatlist_length); |
| ret+=s->tlsext_ecpointformatlist_length; |
| |
| } |
| /* Currently the server should not respond with a SupportedCurves extension */ |
| #endif /* OPENSSL_NO_EC */ |
| |
| if (s->tlsext_ticket_expected |
| && !(SSL_get_options(s) & SSL_OP_NO_TICKET)) |
| { |
| if ((long)(limit - ret - 4) < 0) return NULL; |
| s2n(TLSEXT_TYPE_session_ticket,ret); |
| s2n(0,ret); |
| } |
| |
| if (s->tlsext_status_expected) |
| { |
| if ((long)(limit - ret - 4) < 0) return NULL; |
| s2n(TLSEXT_TYPE_status_request,ret); |
| s2n(0,ret); |
| } |
| |
| #ifdef TLSEXT_TYPE_opaque_prf_input |
| if (s->s3->server_opaque_prf_input != NULL && |
| s->version != DTLS1_VERSION) |
| { |
| size_t sol = s->s3->server_opaque_prf_input_len; |
| |
| if ((long)(limit - ret - 6 - sol) < 0) |
| return NULL; |
| if (sol > 0xFFFD) /* can't happen */ |
| return NULL; |
| |
| s2n(TLSEXT_TYPE_opaque_prf_input, ret); |
| s2n(sol + 2, ret); |
| s2n(sol, ret); |
| memcpy(ret, s->s3->server_opaque_prf_input, sol); |
| ret += sol; |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_SRTP |
| if(s->srtp_profile) |
| { |
| int el; |
| |
| ssl_add_serverhello_use_srtp_ext(s, 0, &el, 0); |
| |
| if((limit - p - 4 - el) < 0) return NULL; |
| |
| s2n(TLSEXT_TYPE_use_srtp,ret); |
| s2n(el,ret); |
| |
| if(ssl_add_serverhello_use_srtp_ext(s, ret, &el, el)) |
| { |
| SSLerr(SSL_F_SSL_ADD_SERVERHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); |
| return NULL; |
| } |
| ret+=el; |
| } |
| #endif |
| |
| if (((s->s3->tmp.new_cipher->id & 0xFFFF)==0x80 || (s->s3->tmp.new_cipher->id & 0xFFFF)==0x81) |
| && (SSL_get_options(s) & SSL_OP_CRYPTOPRO_TLSEXT_BUG)) |
| { const unsigned char cryptopro_ext[36] = { |
| 0xfd, 0xe8, /*65000*/ |
| 0x00, 0x20, /*32 bytes length*/ |
| 0x30, 0x1e, 0x30, 0x08, 0x06, 0x06, 0x2a, 0x85, |
| 0x03, 0x02, 0x02, 0x09, 0x30, 0x08, 0x06, 0x06, |
| 0x2a, 0x85, 0x03, 0x02, 0x02, 0x16, 0x30, 0x08, |
| 0x06, 0x06, 0x2a, 0x85, 0x03, 0x02, 0x02, 0x17}; |
| if (limit-ret<36) return NULL; |
| memcpy(ret,cryptopro_ext,36); |
| ret+=36; |
| |
| } |
| |
| #ifndef OPENSSL_NO_HEARTBEATS |
| /* Add Heartbeat extension if we've received one */ |
| if (s->tlsext_heartbeat & SSL_TLSEXT_HB_ENABLED) |
| { |
| s2n(TLSEXT_TYPE_heartbeat,ret); |
| s2n(1,ret); |
| /* Set mode: |
| * 1: peer may send requests |
| * 2: peer not allowed to send requests |
| */ |
| if (s->tlsext_heartbeat & SSL_TLSEXT_HB_DONT_RECV_REQUESTS) |
| *(ret++) = SSL_TLSEXT_HB_DONT_SEND_REQUESTS; |
| else |
| *(ret++) = SSL_TLSEXT_HB_ENABLED; |
| |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| next_proto_neg_seen = s->s3->next_proto_neg_seen; |
| s->s3->next_proto_neg_seen = 0; |
| if (next_proto_neg_seen && s->ctx->next_protos_advertised_cb) |
| { |
| const unsigned char *npa; |
| unsigned int npalen; |
| int r; |
| |
| r = s->ctx->next_protos_advertised_cb(s, &npa, &npalen, s->ctx->next_protos_advertised_cb_arg); |
| if (r == SSL_TLSEXT_ERR_OK) |
| { |
| if ((long)(limit - ret - 4 - npalen) < 0) return NULL; |
| s2n(TLSEXT_TYPE_next_proto_neg,ret); |
| s2n(npalen,ret); |
| memcpy(ret, npa, npalen); |
| ret += npalen; |
| s->s3->next_proto_neg_seen = 1; |
| } |
| } |
| #endif |
| |
| /* If the client advertised support for Channel ID, and we have it |
| * enabled, then we want to echo it back. */ |
| if (s->s3->tlsext_channel_id_valid) |
| { |
| if (limit - ret - 4 < 0) |
| return NULL; |
| s2n(TLSEXT_TYPE_channel_id,ret); |
| s2n(0,ret); |
| } |
| |
| if ((extdatalen = ret-p-2)== 0) |
| return p; |
| |
| s2n(extdatalen,p); |
| return ret; |
| } |
| |
| int ssl_parse_clienthello_tlsext(SSL *s, unsigned char **p, unsigned char *d, int n, int *al) |
| { |
| unsigned short type; |
| unsigned short size; |
| unsigned short len; |
| unsigned char *data = *p; |
| int renegotiate_seen = 0; |
| int sigalg_seen = 0; |
| |
| s->servername_done = 0; |
| s->tlsext_status_type = -1; |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| s->s3->next_proto_neg_seen = 0; |
| #endif |
| |
| #ifndef OPENSSL_NO_HEARTBEATS |
| s->tlsext_heartbeat &= ~(SSL_TLSEXT_HB_ENABLED | |
| SSL_TLSEXT_HB_DONT_SEND_REQUESTS); |
| #endif |
| |
| if (data >= (d+n-2)) |
| goto ri_check; |
| n2s(data,len); |
| |
| if (data > (d+n-len)) |
| goto ri_check; |
| |
| while (data <= (d+n-4)) |
| { |
| n2s(data,type); |
| n2s(data,size); |
| |
| if (data+size > (d+n)) |
| goto ri_check; |
| #if 0 |
| fprintf(stderr,"Received extension type %d size %d\n",type,size); |
| #endif |
| if (s->tlsext_debug_cb) |
| s->tlsext_debug_cb(s, 0, type, data, size, |
| s->tlsext_debug_arg); |
| /* The servername extension is treated as follows: |
| |
| - Only the hostname type is supported with a maximum length of 255. |
| - The servername is rejected if too long or if it contains zeros, |
| in which case an fatal alert is generated. |
| - The servername field is maintained together with the session cache. |
| - When a session is resumed, the servername call back invoked in order |
| to allow the application to position itself to the right context. |
| - The servername is acknowledged if it is new for a session or when |
| it is identical to a previously used for the same session. |
| Applications can control the behaviour. They can at any time |
| set a 'desirable' servername for a new SSL object. This can be the |
| case for example with HTTPS when a Host: header field is received and |
| a renegotiation is requested. In this case, a possible servername |
| presented in the new client hello is only acknowledged if it matches |
| the value of the Host: field. |
| - Applications must use SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION |
| if they provide for changing an explicit servername context for the session, |
| i.e. when the session has been established with a servername extension. |
| - On session reconnect, the servername extension may be absent. |
| |
| */ |
| |
| if (type == TLSEXT_TYPE_server_name) |
| { |
| unsigned char *sdata; |
| int servname_type; |
| int dsize; |
| |
| if (size < 2) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| n2s(data,dsize); |
| size -= 2; |
| if (dsize > size ) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| |
| sdata = data; |
| while (dsize > 3) |
| { |
| servname_type = *(sdata++); |
| n2s(sdata,len); |
| dsize -= 3; |
| |
| if (len > dsize) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| if (s->servername_done == 0) |
| switch (servname_type) |
| { |
| case TLSEXT_NAMETYPE_host_name: |
| if (!s->hit) |
| { |
| if(s->session->tlsext_hostname) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| if (len > TLSEXT_MAXLEN_host_name) |
| { |
| *al = TLS1_AD_UNRECOGNIZED_NAME; |
| return 0; |
| } |
| if ((s->session->tlsext_hostname = OPENSSL_malloc(len+1)) == NULL) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| memcpy(s->session->tlsext_hostname, sdata, len); |
| s->session->tlsext_hostname[len]='\0'; |
| if (strlen(s->session->tlsext_hostname) != len) { |
| OPENSSL_free(s->session->tlsext_hostname); |
| s->session->tlsext_hostname = NULL; |
| *al = TLS1_AD_UNRECOGNIZED_NAME; |
| return 0; |
| } |
| s->servername_done = 1; |
| |
| } |
| else |
| s->servername_done = s->session->tlsext_hostname |
| && strlen(s->session->tlsext_hostname) == len |
| && strncmp(s->session->tlsext_hostname, (char *)sdata, len) == 0; |
| |
| break; |
| |
| default: |
| break; |
| } |
| |
| dsize -= len; |
| } |
| if (dsize != 0) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| |
| } |
| #ifndef OPENSSL_NO_SRP |
| else if (type == TLSEXT_TYPE_srp) |
| { |
| if (size <= 0 || ((len = data[0])) != (size -1)) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| if (s->srp_ctx.login != NULL) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| if ((s->srp_ctx.login = OPENSSL_malloc(len+1)) == NULL) |
| return -1; |
| memcpy(s->srp_ctx.login, &data[1], len); |
| s->srp_ctx.login[len]='\0'; |
| |
| if (strlen(s->srp_ctx.login) != len) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_EC |
| else if (type == TLSEXT_TYPE_ec_point_formats && |
| s->version != DTLS1_VERSION) |
| { |
| unsigned char *sdata = data; |
| int ecpointformatlist_length = *(sdata++); |
| |
| if (ecpointformatlist_length != size - 1) |
| { |
| *al = TLS1_AD_DECODE_ERROR; |
| return 0; |
| } |
| if (!s->hit) |
| { |
| if(s->session->tlsext_ecpointformatlist) |
| { |
| OPENSSL_free(s->session->tlsext_ecpointformatlist); |
| s->session->tlsext_ecpointformatlist = NULL; |
| } |
| s->session->tlsext_ecpointformatlist_length = 0; |
| if ((s->session->tlsext_ecpointformatlist = OPENSSL_malloc(ecpointformatlist_length)) == NULL) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| s->session->tlsext_ecpointformatlist_length = ecpointformatlist_length; |
| memcpy(s->session->tlsext_ecpointformatlist, sdata, ecpointformatlist_length); |
| } |
| #if 0 |
| fprintf(stderr,"ssl_parse_clienthello_tlsext s->session->tlsext_ecpointformatlist (length=%i) ", s->session->tlsext_ecpointformatlist_length); |
| sdata = s->session->tlsext_ecpointformatlist; |
| for (i = 0; i < s->session->tlsext_ecpointformatlist_length; i++) |
| fprintf(stderr,"%i ",*(sdata++)); |
| fprintf(stderr,"\n"); |
| #endif |
| } |
| else if (type == TLSEXT_TYPE_elliptic_curves && |
| s->version != DTLS1_VERSION) |
| { |
| unsigned char *sdata = data; |
| int ellipticcurvelist_length = (*(sdata++) << 8); |
| ellipticcurvelist_length += (*(sdata++)); |
| |
| if (ellipticcurvelist_length != size - 2 || |
| ellipticcurvelist_length < 1) |
| { |
| *al = TLS1_AD_DECODE_ERROR; |
| return 0; |
| } |
| if (!s->hit) |
| { |
| if(s->session->tlsext_ellipticcurvelist) |
| { |
| *al = TLS1_AD_DECODE_ERROR; |
| return 0; |
| } |
| s->session->tlsext_ellipticcurvelist_length = 0; |
| if ((s->session->tlsext_ellipticcurvelist = OPENSSL_malloc(ellipticcurvelist_length)) == NULL) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| s->session->tlsext_ellipticcurvelist_length = ellipticcurvelist_length; |
| memcpy(s->session->tlsext_ellipticcurvelist, sdata, ellipticcurvelist_length); |
| } |
| #if 0 |
| fprintf(stderr,"ssl_parse_clienthello_tlsext s->session->tlsext_ellipticcurvelist (length=%i) ", s->session->tlsext_ellipticcurvelist_length); |
| sdata = s->session->tlsext_ellipticcurvelist; |
| for (i = 0; i < s->session->tlsext_ellipticcurvelist_length; i++) |
| fprintf(stderr,"%i ",*(sdata++)); |
| fprintf(stderr,"\n"); |
| #endif |
| } |
| #endif /* OPENSSL_NO_EC */ |
| #ifdef TLSEXT_TYPE_opaque_prf_input |
| else if (type == TLSEXT_TYPE_opaque_prf_input && |
| s->version != DTLS1_VERSION) |
| { |
| unsigned char *sdata = data; |
| |
| if (size < 2) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| n2s(sdata, s->s3->client_opaque_prf_input_len); |
| if (s->s3->client_opaque_prf_input_len != size - 2) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| |
| if (s->s3->client_opaque_prf_input != NULL) /* shouldn't really happen */ |
| OPENSSL_free(s->s3->client_opaque_prf_input); |
| if (s->s3->client_opaque_prf_input_len == 0) |
| s->s3->client_opaque_prf_input = OPENSSL_malloc(1); /* dummy byte just to get non-NULL */ |
| else |
| s->s3->client_opaque_prf_input = BUF_memdup(sdata, s->s3->client_opaque_prf_input_len); |
| if (s->s3->client_opaque_prf_input == NULL) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| } |
| #endif |
| else if (type == TLSEXT_TYPE_session_ticket) |
| { |
| if (s->tls_session_ticket_ext_cb && |
| !s->tls_session_ticket_ext_cb(s, data, size, s->tls_session_ticket_ext_cb_arg)) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| } |
| else if (type == TLSEXT_TYPE_renegotiate) |
| { |
| if(!ssl_parse_clienthello_renegotiate_ext(s, data, size, al)) |
| return 0; |
| renegotiate_seen = 1; |
| } |
| else if (type == TLSEXT_TYPE_signature_algorithms) |
| { |
| int dsize; |
| if (sigalg_seen || size < 2) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| sigalg_seen = 1; |
| n2s(data,dsize); |
| size -= 2; |
| if (dsize != size || dsize & 1) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| if (!tls1_process_sigalgs(s, data, dsize)) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| } |
| else if (type == TLSEXT_TYPE_status_request && |
| s->version != DTLS1_VERSION && s->ctx->tlsext_status_cb) |
| { |
| |
| if (size < 5) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| |
| s->tlsext_status_type = *data++; |
| size--; |
| if (s->tlsext_status_type == TLSEXT_STATUSTYPE_ocsp) |
| { |
| const unsigned char *sdata; |
| int dsize; |
| /* Read in responder_id_list */ |
| n2s(data,dsize); |
| size -= 2; |
| if (dsize > size ) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| while (dsize > 0) |
| { |
| OCSP_RESPID *id; |
| int idsize; |
| if (dsize < 4) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| n2s(data, idsize); |
| dsize -= 2 + idsize; |
| size -= 2 + idsize; |
| if (dsize < 0) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| sdata = data; |
| data += idsize; |
| id = d2i_OCSP_RESPID(NULL, |
| &sdata, idsize); |
| if (!id) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| if (data != sdata) |
| { |
| OCSP_RESPID_free(id); |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| if (!s->tlsext_ocsp_ids |
| && !(s->tlsext_ocsp_ids = |
| sk_OCSP_RESPID_new_null())) |
| { |
| OCSP_RESPID_free(id); |
| *al = SSL_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| if (!sk_OCSP_RESPID_push( |
| s->tlsext_ocsp_ids, id)) |
| { |
| OCSP_RESPID_free(id); |
| *al = SSL_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| } |
| |
| /* Read in request_extensions */ |
| if (size < 2) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| n2s(data,dsize); |
| size -= 2; |
| if (dsize != size) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| sdata = data; |
| if (dsize > 0) |
| { |
| if (s->tlsext_ocsp_exts) |
| { |
| sk_X509_EXTENSION_pop_free(s->tlsext_ocsp_exts, |
| X509_EXTENSION_free); |
| } |
| |
| s->tlsext_ocsp_exts = |
| d2i_X509_EXTENSIONS(NULL, |
| &sdata, dsize); |
| if (!s->tlsext_ocsp_exts |
| || (data + dsize != sdata)) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| } |
| } |
| /* We don't know what to do with any other type |
| * so ignore it. |
| */ |
| else |
| s->tlsext_status_type = -1; |
| } |
| #ifndef OPENSSL_NO_HEARTBEATS |
| else if (type == TLSEXT_TYPE_heartbeat) |
| { |
| switch(data[0]) |
| { |
| case 0x01: /* Client allows us to send HB requests */ |
| s->tlsext_heartbeat |= SSL_TLSEXT_HB_ENABLED; |
| break; |
| case 0x02: /* Client doesn't accept HB requests */ |
| s->tlsext_heartbeat |= SSL_TLSEXT_HB_ENABLED; |
| s->tlsext_heartbeat |= SSL_TLSEXT_HB_DONT_SEND_REQUESTS; |
| break; |
| default: *al = SSL_AD_ILLEGAL_PARAMETER; |
| return 0; |
| } |
| } |
| #endif |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| else if (type == TLSEXT_TYPE_next_proto_neg && |
| s->s3->tmp.finish_md_len == 0) |
| { |
| /* We shouldn't accept this extension on a |
| * renegotiation. |
| * |
| * s->new_session will be set on renegotiation, but we |
| * probably shouldn't rely that it couldn't be set on |
| * the initial renegotation too in certain cases (when |
| * there's some other reason to disallow resuming an |
| * earlier session -- the current code won't be doing |
| * anything like that, but this might change). |
| |
| * A valid sign that there's been a previous handshake |
| * in this connection is if s->s3->tmp.finish_md_len > |
| * 0. (We are talking about a check that will happen |
| * in the Hello protocol round, well before a new |
| * Finished message could have been computed.) */ |
| s->s3->next_proto_neg_seen = 1; |
| } |
| #endif |
| |
| else if (type == TLSEXT_TYPE_channel_id && s->tlsext_channel_id_enabled) |
| s->s3->tlsext_channel_id_valid = 1; |
| |
| /* session ticket processed earlier */ |
| #ifndef OPENSSL_NO_SRTP |
| else if (type == TLSEXT_TYPE_use_srtp) |
| { |
| if(ssl_parse_clienthello_use_srtp_ext(s, data, size, |
| al)) |
| return 0; |
| } |
| #endif |
| |
| data+=size; |
| } |
| |
| *p = data; |
| |
| ri_check: |
| |
| /* Need RI if renegotiating */ |
| |
| if (!renegotiate_seen && s->renegotiate && |
| !(s->options & SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION)) |
| { |
| *al = SSL_AD_HANDSHAKE_FAILURE; |
| SSLerr(SSL_F_SSL_PARSE_CLIENTHELLO_TLSEXT, |
| SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| /* ssl_next_proto_validate validates a Next Protocol Negotiation block. No |
| * elements of zero length are allowed and the set of elements must exactly fill |
| * the length of the block. */ |
| static char ssl_next_proto_validate(unsigned char *d, unsigned len) |
| { |
| unsigned int off = 0; |
| |
| while (off < len) |
| { |
| if (d[off] == 0) |
| return 0; |
| off += d[off]; |
| off++; |
| } |
| |
| return off == len; |
| } |
| #endif |
| |
| int ssl_parse_serverhello_tlsext(SSL *s, unsigned char **p, unsigned char *d, int n, int *al) |
| { |
| unsigned short length; |
| unsigned short type; |
| unsigned short size; |
| unsigned char *data = *p; |
| int tlsext_servername = 0; |
| int renegotiate_seen = 0; |
| |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| s->s3->next_proto_neg_seen = 0; |
| #endif |
| |
| #ifndef OPENSSL_NO_HEARTBEATS |
| s->tlsext_heartbeat &= ~(SSL_TLSEXT_HB_ENABLED | |
| SSL_TLSEXT_HB_DONT_SEND_REQUESTS); |
| #endif |
| |
| if (data >= (d+n-2)) |
| goto ri_check; |
| |
| n2s(data,length); |
| if (data+length != d+n) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| |
| while(data <= (d+n-4)) |
| { |
| n2s(data,type); |
| n2s(data,size); |
| |
| if (data+size > (d+n)) |
| goto ri_check; |
| |
| if (s->tlsext_debug_cb) |
| s->tlsext_debug_cb(s, 1, type, data, size, |
| s->tlsext_debug_arg); |
| |
| if (type == TLSEXT_TYPE_server_name) |
| { |
| if (s->tlsext_hostname == NULL || size > 0) |
| { |
| *al = TLS1_AD_UNRECOGNIZED_NAME; |
| return 0; |
| } |
| tlsext_servername = 1; |
| } |
| |
| #ifndef OPENSSL_NO_EC |
| else if (type == TLSEXT_TYPE_ec_point_formats && |
| s->version != DTLS1_VERSION) |
| { |
| unsigned char *sdata = data; |
| int ecpointformatlist_length = *(sdata++); |
| |
| if (ecpointformatlist_length != size - 1 || |
| ecpointformatlist_length < 1) |
| { |
| *al = TLS1_AD_DECODE_ERROR; |
| return 0; |
| } |
| s->session->tlsext_ecpointformatlist_length = 0; |
| if (s->session->tlsext_ecpointformatlist != NULL) OPENSSL_free(s->session->tlsext_ecpointformatlist); |
| if ((s->session->tlsext_ecpointformatlist = OPENSSL_malloc(ecpointformatlist_length)) == NULL) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| s->session->tlsext_ecpointformatlist_length = ecpointformatlist_length; |
| memcpy(s->session->tlsext_ecpointformatlist, sdata, ecpointformatlist_length); |
| #if 0 |
| fprintf(stderr,"ssl_parse_serverhello_tlsext s->session->tlsext_ecpointformatlist "); |
| sdata = s->session->tlsext_ecpointformatlist; |
| for (i = 0; i < s->session->tlsext_ecpointformatlist_length; i++) |
| fprintf(stderr,"%i ",*(sdata++)); |
| fprintf(stderr,"\n"); |
| #endif |
| } |
| #endif /* OPENSSL_NO_EC */ |
| |
| else if (type == TLSEXT_TYPE_session_ticket) |
| { |
| if (s->tls_session_ticket_ext_cb && |
| !s->tls_session_ticket_ext_cb(s, data, size, s->tls_session_ticket_ext_cb_arg)) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| if ((SSL_get_options(s) & SSL_OP_NO_TICKET) |
| || (size > 0)) |
| { |
| *al = TLS1_AD_UNSUPPORTED_EXTENSION; |
| return 0; |
| } |
| s->tlsext_ticket_expected = 1; |
| } |
| #ifdef TLSEXT_TYPE_opaque_prf_input |
| else if (type == TLSEXT_TYPE_opaque_prf_input && |
| s->version != DTLS1_VERSION) |
| { |
| unsigned char *sdata = data; |
| |
| if (size < 2) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| n2s(sdata, s->s3->server_opaque_prf_input_len); |
| if (s->s3->server_opaque_prf_input_len != size - 2) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| |
| if (s->s3->server_opaque_prf_input != NULL) /* shouldn't really happen */ |
| OPENSSL_free(s->s3->server_opaque_prf_input); |
| if (s->s3->server_opaque_prf_input_len == 0) |
| s->s3->server_opaque_prf_input = OPENSSL_malloc(1); /* dummy byte just to get non-NULL */ |
| else |
| s->s3->server_opaque_prf_input = BUF_memdup(sdata, s->s3->server_opaque_prf_input_len); |
| |
| if (s->s3->server_opaque_prf_input == NULL) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| } |
| #endif |
| else if (type == TLSEXT_TYPE_status_request && |
| s->version != DTLS1_VERSION) |
| { |
| /* MUST be empty and only sent if we've requested |
| * a status request message. |
| */ |
| if ((s->tlsext_status_type == -1) || (size > 0)) |
| { |
| *al = TLS1_AD_UNSUPPORTED_EXTENSION; |
| return 0; |
| } |
| /* Set flag to expect CertificateStatus message */ |
| s->tlsext_status_expected = 1; |
| } |
| #ifndef OPENSSL_NO_NEXTPROTONEG |
| else if (type == TLSEXT_TYPE_next_proto_neg && |
| s->s3->tmp.finish_md_len == 0) |
| { |
| unsigned char *selected; |
| unsigned char selected_len; |
| |
| /* We must have requested it. */ |
| if (s->ctx->next_proto_select_cb == NULL) |
| { |
| *al = TLS1_AD_UNSUPPORTED_EXTENSION; |
| return 0; |
| } |
| /* The data must be valid */ |
| if (!ssl_next_proto_validate(data, size)) |
| { |
| *al = TLS1_AD_DECODE_ERROR; |
| return 0; |
| } |
| if (s->ctx->next_proto_select_cb(s, &selected, &selected_len, data, size, s->ctx->next_proto_select_cb_arg) != SSL_TLSEXT_ERR_OK) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| s->next_proto_negotiated = OPENSSL_malloc(selected_len); |
| if (!s->next_proto_negotiated) |
| { |
| *al = TLS1_AD_INTERNAL_ERROR; |
| return 0; |
| } |
| memcpy(s->next_proto_negotiated, selected, selected_len); |
| s->next_proto_negotiated_len = selected_len; |
| s->s3->next_proto_neg_seen = 1; |
| } |
| #endif |
| else if (type == TLSEXT_TYPE_channel_id) |
| s->s3->tlsext_channel_id_valid = 1; |
| |
| else if (type == TLSEXT_TYPE_renegotiate) |
| { |
| if(!ssl_parse_serverhello_renegotiate_ext(s, data, size, al)) |
| return 0; |
| renegotiate_seen = 1; |
| } |
| #ifndef OPENSSL_NO_HEARTBEATS |
| else if (type == TLSEXT_TYPE_heartbeat) |
| { |
| switch(data[0]) |
| { |
| case 0x01: /* Server allows us to send HB requests */ |
| s->tlsext_heartbeat |= SSL_TLSEXT_HB_ENABLED; |
| break; |
| case 0x02: /* Server doesn't accept HB requests */ |
| s->tlsext_heartbeat |= SSL_TLSEXT_HB_ENABLED; |
| s->tlsext_heartbeat |= SSL_TLSEXT_HB_DONT_SEND_REQUESTS; |
| break; |
| default: *al = SSL_AD_ILLEGAL_PARAMETER; |
| return 0; |
| } |
| } |
| #endif |
| #ifndef OPENSSL_NO_SRTP |
| else if (type == TLSEXT_TYPE_use_srtp) |
| { |
| if(ssl_parse_serverhello_use_srtp_ext(s, data, size, |
| al)) |
| return 0; |
| } |
| #endif |
| |
| data+=size; |
| } |
| |
| if (data != d+n) |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| |
| if (!s->hit && tlsext_servername == 1) |
| { |
| if (s->tlsext_hostname) |
| { |
| if (s->session->tlsext_hostname == NULL) |
| { |
| s->session->tlsext_hostname = BUF_strdup(s->tlsext_hostname); |
| if (!s->session->tlsext_hostname) |
| { |
| *al = SSL_AD_UNRECOGNIZED_NAME; |
| return 0; |
| } |
| } |
| else |
| { |
| *al = SSL_AD_DECODE_ERROR; |
| return 0; |
| } |
| } |
| } |
| |
| *p = data; |
| |
| ri_check: |
| |
| /* Determine if we need to see RI. Strictly speaking if we want to |
| * avoid an attack we should *always* see RI even on initial server |
| * hello because the client doesn't see any renegotiation during an |
| * attack. However this would mean we could not connect to any server |
| * which doesn't support RI so for the immediate future tolerate RI |
| * absence on initial connect only. |
| */ |
| if (!renegotiate_seen |
| && !(s->options & SSL_OP_LEGACY_SERVER_CONNECT) |
| && !(s->options & SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION)) |
| { |
| *al = SSL_AD_HANDSHAKE_FAILURE; |
| SSLerr(SSL_F_SSL_PARSE_SERVERHELLO_TLSEXT, |
| SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| |
| int ssl_prepare_clienthello_tlsext(SSL *s) |
| { |
| #ifndef OPENSSL_NO_EC |
| /* If we are client and using an elliptic curve cryptography cipher suite, send the point formats |
| * and elliptic curves we support. |
| */ |
| int using_ecc = 0; |
| int i; |
| unsigned char *j; |
| unsigned long alg_k, alg_a; |
| STACK_OF(SSL_CIPHER) *cipher_stack = SSL_get_ciphers(s); |
| |
| for (i = 0; i < sk_SSL_CIPHER_num(cipher_stack); i++) |
| { |
| SSL_CIPHER *c = sk_SSL_CIPHER_value(cipher_stack, i); |
| |
| alg_k = c->algorithm_mkey; |
| alg_a = c->algorithm_auth; |
| if ((alg_k & (SSL_kEECDH|SSL_kECDHr|SSL_kECDHe) || (alg_a & SSL_aECDSA))) |
| { |
| using_ecc = 1; |
| break; |
| } |
| } |
| using_ecc = using_ecc && (s->version >= TLS1_VERSION); |
| if (using_ecc) |
| { |
| if (s->tlsext_ecpointformatlist != NULL) OPENSSL_free(s->tlsext_ecpointformatlist); |
| if ((s->tlsext_ecpointformatlist = OPENSSL_malloc(3)) == NULL) |
| { |
| SSLerr(SSL_F_SSL_PREPARE_CLIENTHELLO_TLSEXT,ERR_R_MALLOC_FAILURE); |
| return -1; |
| } |
| s->tlsext_ecpointformatlist_length = 3; |
| s->tlsext_ecpointformatlist[0] = TLSEXT_ECPOINTFORMAT_uncompressed; |
| s->tlsext_ecpointformatlist[1] = TLSEXT_ECPOINTFORMAT_ansiX962_compressed_prime; |
| s->tlsext_ecpointformatlist[2] = TLSEXT_ECPOINTFORMAT_ansiX962_compressed_char2; |
| |
| /* we support all named elliptic curves in draft-ietf-tls-ecc-12 */ |
| if (s->tlsext_ellipticcurvelist != NULL) OPENSSL_free(s->tlsext_ellipticcurvelist); |
| s->tlsext_ellipticcurvelist_length = sizeof(pref_list)/sizeof(pref_list[0]) * 2; |
| if ((s->tlsext_ellipticcurvelist = OPENSSL_malloc(s->tlsext_ellipticcurvelist_length)) == NULL) |
| { |
| s->tlsext_ellipticcurvelist_length = 0; |
| SSLerr(SSL_F_SSL_PREPARE_CLIENTHELLO_TLSEXT,ERR_R_MALLOC_FAILURE); |
| return -1; |
| } |
| for (i = 0, j = s->tlsext_ellipticcurvelist; (unsigned int)i < |
| sizeof(pref_list)/sizeof(pref_list[0]); i++) |
| { |
| int id = tls1_ec_nid2curve_id(pref_list[i]); |
| s2n(id,j); |
| } |
| } |
| #endif /* OPENSSL_NO_EC */ |
| |
| #ifdef TLSEXT_TYPE_opaque_prf_input |
| { |
| int r = 1; |
| |
| if (s->ctx->tlsext_opaque_prf_input_callback != 0) |
| { |
| r = s->ctx->tlsext_opaque_prf_input_callback(s, NULL, 0, s->ctx->tlsext_opaque_prf_input_callback_arg); |
| if (!r) |
| return -1; |
| } |
| |
| if (s->tlsext_opaque_prf_input != NULL) |
| { |
| if (s->s3->client_opaque_prf_input != NULL) /* shouldn't really happen */ |
| OPENSSL_free(s->s3->client_opaque_prf_input); |
| |
| if (s->tlsext_opaque_prf_input_len == 0) |
| s->s3->client_opaque_prf_input = OPENSSL_malloc(1); /* dummy byte just to get non-NULL */ |
| else |
| s->s3->client_opaque_prf_input = BUF_memdup(s->tlsext_opaque_prf_input, s->tlsext_opaque_prf_input_len); |
| if (s->s3->client_opaque_prf_input == NULL) |
| { |
| SSLerr(SSL_F_SSL_PREPARE_CLIENTHELLO_TLSEXT,ERR_R_MALLOC_FAILURE); |
| return -1; |
| } |
| s->s3->client_opaque_prf_input_len = s->tlsext_opaque_prf_input_len; |
| } |
| |
| if (r == 2) |
| /* at callback's request, insist on receiving an appropriate server opaque PRF input */ |
| s->s3->server_opaque_prf_input_len = s->tlsext_opaque_prf_input_len; |
| } |
| #endif |
| |
| return 1; |
| } |
| |
| int ssl_prepare_serverhello_tlsext(SSL *s) |
| { |
| #ifndef OPENSSL_NO_EC |
| /* If we are server and using an ECC cipher suite, send the point formats we support |
| * if the client sent us an ECPointsFormat extension. Note that the server is not |
| * supposed to send an EllipticCurves extension. |
| */ |
| |
| unsigned long alg_k = s->s3->tmp.new_cipher->algorithm_mkey; |
| unsigned long alg_a = s->s3->tmp.new_cipher->algorithm_auth; |
| int using_ecc = (alg_k & (SSL_kEECDH|SSL_kECDHr|SSL_kECDHe)) || (alg_a & SSL_aECDSA); |
| using_ecc = using_ecc && (s->session->tlsext_ecpointformatlist != NULL); |
| |
| if (using_ecc) |
| { |
| if (s->tlsext_ecpointformatlist != NULL) OPENSSL_free(s->tlsext_ecpointformatlist); |
| if ((s->tlsext_ecpointformatlist = OPENSSL_malloc(3)) == NULL) |
| { |
| SSLerr(SSL_F_SSL_PREPARE_SERVERHELLO_TLSEXT,ERR_R_MALLOC_FAILURE); |
| return -1; |
| } |
| s->tlsext_ecpointformatlist_length = 3; |
| s->tlsext_ecpointformatlist[0] = TLSEXT_ECPOINTFORMAT_uncompressed; |
| s->tlsext_ecpointformatlist[1] = TLSEXT_ECPOINTFORMAT_ansiX962_compressed_prime; |
| s->tlsext_ecpointformatlist[2] = TLSEXT_ECPOINTFORMAT_ansiX962_compressed_char2; |
| } |
| #endif /* OPENSSL_NO_EC */ |
| |
| return 1; |
| } |
| |
| int ssl_check_clienthello_tlsext_early(SSL *s) |
| { |
| int ret=SSL_TLSEXT_ERR_NOACK; |
| int al = SSL_AD_UNRECOGNIZED_NAME; |
| |
| #ifndef OPENSSL_NO_EC |
| /* The handling of the ECPointFormats extension is done elsewhere, namely in |
| * ssl3_choose_cipher in s3_lib.c. |
| */ |
| /* The handling of the EllipticCurves extension is done elsewhere, namely in |
| * ssl3_choose_cipher in s3_lib.c. |
| */ |
| #endif |
| |
| if (s->ctx != NULL && s->ctx->tlsext_servername_callback != 0) |
| ret = s->ctx->tlsext_servername_callback(s, &al, s->ctx->tlsext_servername_arg); |
| else if (s->initial_ctx != NULL && s->initial_ctx->tlsext_servername_callback != 0) |
| ret = s->initial_ctx->tlsext_servername_callback(s, &al, s->initial_ctx->tlsext_servername_arg); |
| |
| #ifdef TLSEXT_TYPE_opaque_prf_input |
| { |
| /* This sort of belongs into ssl_prepare_serverhello_tlsext(), |
| * but we might be sending an alert in response to the client hello, |
| * so this has to happen here in |
| * ssl_check_clienthello_tlsext_early(). */ |
| |
| int r = 1; |
| |
| if (s->ctx->tlsext_opaque_prf_input_callback != 0) |
| { |
| r = s->ctx->tlsext_opaque_prf_input_callback(s, NULL, 0, s->ctx->tlsext_opaque_prf_input_callback_arg); |
| if (!r) |
| { |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; |
| al = SSL_AD_INTERNAL_ERROR; |
| goto err; |
| } |
| } |
| |
| if (s->s3->server_opaque_prf_input != NULL) /* shouldn't really happen */ |
| OPENSSL_free(s->s3->server_opaque_prf_input); |
| s->s3->server_opaque_prf_input = NULL; |
| |
| if (s->tlsext_opaque_prf_input != NULL) |
| { |
| if (s->s3->client_opaque_prf_input != NULL && |
| s->s3->client_opaque_prf_input_len == s->tlsext_opaque_prf_input_len) |
| { |
| /* can only use this extension if we have a server opaque PRF input |
| * of the same length as the client opaque PRF input! */ |
| |
| if (s->tlsext_opaque_prf_input_len == 0) |
| s->s3->server_opaque_prf_input = OPENSSL_malloc(1); /* dummy byte just to get non-NULL */ |
| else |
| s->s3->server_opaque_prf_input = BUF_memdup(s->tlsext_opaque_prf_input, s->tlsext_opaque_prf_input_len); |
| if (s->s3->server_opaque_prf_input == NULL) |
| { |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; |
| al = SSL_AD_INTERNAL_ERROR; |
| goto err; |
| } |
| s->s3->server_opaque_prf_input_len = s->tlsext_opaque_prf_input_len; |
| } |
| } |
| |
| if (r == 2 && s->s3->server_opaque_prf_input == NULL) |
| { |
| /* The callback wants to enforce use of the extension, |
| * but we can't do that with the client opaque PRF input; |
| * abort the handshake. |
| */ |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; |
| al = SSL_AD_HANDSHAKE_FAILURE; |
| } |
| } |
| |
| err: |
| #endif |
| switch (ret) |
| { |
| case SSL_TLSEXT_ERR_ALERT_FATAL: |
| ssl3_send_alert(s,SSL3_AL_FATAL,al); |
| return -1; |
| |
| case SSL_TLSEXT_ERR_ALERT_WARNING: |
| ssl3_send_alert(s,SSL3_AL_WARNING,al); |
| return 1; |
| |
| case SSL_TLSEXT_ERR_NOACK: |
| s->servername_done=0; |
| default: |
| return 1; |
| } |
| } |
| |
| int ssl_check_clienthello_tlsext_late(SSL *s) |
| { |
| int ret = SSL_TLSEXT_ERR_OK; |
| int al; |
| |
| /* If status request then ask callback what to do. |
| * Note: this must be called after servername callbacks in case |
| * the certificate has changed, and must be called after the cipher |
| * has been chosen because this may influence which certificate is sent |
| */ |
| if ((s->tlsext_status_type != -1) && s->ctx && s->ctx->tlsext_status_cb) |
| { |
| int r; |
| CERT_PKEY *certpkey; |
| certpkey = ssl_get_server_send_pkey(s); |
| /* If no certificate can't return certificate status */ |
| if (certpkey == NULL) |
| { |
| s->tlsext_status_expected = 0; |
| return 1; |
| } |
| /* Set current certificate to one we will use so |
| * SSL_get_certificate et al can pick it up. |
| */ |
| s->cert->key = certpkey; |
| r = s->ctx->tlsext_status_cb(s, s->ctx->tlsext_status_arg); |
| switch (r) |
| { |
| /* We don't want to send a status request response */ |
| case SSL_TLSEXT_ERR_NOACK: |
| s->tlsext_status_expected = 0; |
| break; |
| /* status request response should be sent */ |
| case SSL_TLSEXT_ERR_OK: |
| if (s->tlsext_ocsp_resp) |
| s->tlsext_status_expected = 1; |
| else |
| s->tlsext_status_expected = 0; |
| break; |
| /* something bad happened */ |
| case SSL_TLSEXT_ERR_ALERT_FATAL: |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; |
| al = SSL_AD_INTERNAL_ERROR; |
| goto err; |
| } |
| } |
| else |
| s->tlsext_status_expected = 0; |
| |
| err: |
| switch (ret) |
| { |
| case SSL_TLSEXT_ERR_ALERT_FATAL: |
| ssl3_send_alert(s,SSL3_AL_FATAL,al); |
| return -1; |
| |
| case SSL_TLSEXT_ERR_ALERT_WARNING: |
| ssl3_send_alert(s,SSL3_AL_WARNING,al); |
| return 1; |
| |
| default: |
| return 1; |
| } |
| } |
| |
| int ssl_check_serverhello_tlsext(SSL *s) |
| { |
| int ret=SSL_TLSEXT_ERR_NOACK; |
| int al = SSL_AD_UNRECOGNIZED_NAME; |
| |
| #ifndef OPENSSL_NO_EC |
| /* If we are client and using an elliptic curve cryptography cipher |
| * suite, then if server returns an EC point formats lists extension |
| * it must contain uncompressed. |
| */ |
| unsigned long alg_k = s->s3->tmp.new_cipher->algorithm_mkey; |
| unsigned long alg_a = s->s3->tmp.new_cipher->algorithm_auth; |
| if ((s->tlsext_ecpointformatlist != NULL) && (s->tlsext_ecpointformatlist_length > 0) && |
| (s->session->tlsext_ecpointformatlist != NULL) && (s->session->tlsext_ecpointformatlist_length > 0) && |
| ((alg_k & (SSL_kEECDH|SSL_kECDHr|SSL_kECDHe)) || (alg_a & SSL_aECDSA))) |
| { |
| /* we are using an ECC cipher */ |
| size_t i; |
| unsigned char *list; |
| int found_uncompressed = 0; |
| list = s->session->tlsext_ecpointformatlist; |
| for (i = 0; i < s->session->tlsext_ecpointformatlist_length; i++) |
| { |
| if (*(list++) == TLSEXT_ECPOINTFORMAT_uncompressed) |
| { |
| found_uncompressed = 1; |
| break; |
| } |
| } |
| if (!found_uncompressed) |
| { |
| SSLerr(SSL_F_SSL_CHECK_SERVERHELLO_TLSEXT,SSL_R_TLS_INVALID_ECPOINTFORMAT_LIST); |
| return -1; |
| } |
| } |
| ret = SSL_TLSEXT_ERR_OK; |
| #endif /* OPENSSL_NO_EC */ |
| |
| if (s->ctx != NULL && s->ctx->tlsext_servername_callback != 0) |
| ret = s->ctx->tlsext_servername_callback(s, &al, s->ctx->tlsext_servername_arg); |
| else if (s->initial_ctx != NULL && s->initial_ctx->tlsext_servername_callback != 0) |
| ret = s->initial_ctx->tlsext_servername_callback(s, &al, s->initial_ctx->tlsext_servername_arg); |
| |
| #ifdef TLSEXT_TYPE_opaque_prf_input |
| if (s->s3->server_opaque_prf_input_len > 0) |
| { |
| /* This case may indicate that we, as a client, want to insist on using opaque PRF inputs. |
| * So first verify that we really have a value from the server too. */ |
| |
| if (s->s3->server_opaque_prf_input == NULL) |
| { |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; |
| al = SSL_AD_HANDSHAKE_FAILURE; |
| } |
| |
| /* Anytime the server *has* sent an opaque PRF input, we need to check |
| * that we have a client opaque PRF input of the same size. */ |
| if (s->s3->client_opaque_prf_input == NULL || |
| s->s3->client_opaque_prf_input_len != s->s3->server_opaque_prf_input_len) |
| { |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; |
| al = SSL_AD_ILLEGAL_PARAMETER; |
| } |
| } |
| #endif |
| |
| /* If we've requested certificate status and we wont get one |
| * tell the callback |
| */ |
| if ((s->tlsext_status_type != -1) && !(s->tlsext_status_expected) |
| && s->ctx && s->ctx->tlsext_status_cb) |
| { |
| int r; |
| /* Set resp to NULL, resplen to -1 so callback knows |
| * there is no response. |
| */ |
| if (s->tlsext_ocsp_resp) |
| { |
| OPENSSL_free(s->tlsext_ocsp_resp); |
| s->tlsext_ocsp_resp = NULL; |
| } |
| s->tlsext_ocsp_resplen = -1; |
| r = s->ctx->tlsext_status_cb(s, s->ctx->tlsext_status_arg); |
| if (r == 0) |
| { |
| al = SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE; |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; |
| } |
| if (r < 0) |
| { |
| al = SSL_AD_INTERNAL_ERROR; |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; |
| } |
| } |
| |
| switch (ret) |
| { |
| case SSL_TLSEXT_ERR_ALERT_FATAL: |
| ssl3_send_alert(s,SSL3_AL_FATAL,al); |
| return -1; |
| |
| case SSL_TLSEXT_ERR_ALERT_WARNING: |
| ssl3_send_alert(s,SSL3_AL_WARNING,al); |
| return 1; |
| |
| case SSL_TLSEXT_ERR_NOACK: |
| s->servername_done=0; |
| default: |
| return 1; |
| } |
| } |
| |
| /* Since the server cache lookup is done early on in the processing of the |
| * ClientHello, and other operations depend on the result, we need to handle |
| * any TLS session ticket extension at the same time. |
| * |
| * session_id: points at the session ID in the ClientHello. This code will |
| * read past the end of this in order to parse out the session ticket |
| * extension, if any. |
| * len: the length of the session ID. |
| * limit: a pointer to the first byte after the ClientHello. |
| * ret: (output) on return, if a ticket was decrypted, then this is set to |
| * point to the resulting session. |
| * |
| * If s->tls_session_secret_cb is set then we are expecting a pre-shared key |
| * ciphersuite, in which case we have no use for session tickets and one will |
| * never be decrypted, nor will s->tlsext_ticket_expected be set to 1. |
| * |
| * Returns: |
| * -1: fatal error, either from parsing or decrypting the ticket. |
| * 0: no ticket was found (or was ignored, based on settings). |
| * 1: a zero length extension was found, indicating that the client supports |
| * session tickets but doesn't currently have one to offer. |
| * 2: either s->tls_session_secret_cb was set, or a ticket was offered but |
| * couldn't be decrypted because of a non-fatal error. |
| * 3: a ticket was successfully decrypted and *ret was set. |
| * |
| * Side effects: |
| * Sets s->tlsext_ticket_expected to 1 if the server will have to issue |
| * a new session ticket to the client because the client indicated support |
| * (and s->tls_session_secret_cb is NULL) but the client either doesn't have |
| * a session ticket or we couldn't use the one it gave us, or if |
| * s->ctx->tlsext_ticket_key_cb asked to renew the client's ticket. |
| * Otherwise, s->tlsext_ticket_expected is set to 0. |
| */ |
| int tls1_process_ticket(SSL *s, unsigned char *session_id, int len, |
| const unsigned char *limit, SSL_SESSION **ret) |
| { |
| /* Point after session ID in client hello */ |
| const unsigned char *p = session_id + len; |
| unsigned short i; |
| |
| *ret = NULL; |
| s->tlsext_ticket_expected = 0; |
| |
| /* If tickets disabled behave as if no ticket present |
| * to permit stateful resumption. |
| */ |
| if (SSL_get_options(s) & SSL_OP_NO_TICKET) |
| return 0; |
| if ((s->version <= SSL3_VERSION) || !limit) |
| return 0; |
| if (p >= limit) |
| return -1; |
| /* Skip past DTLS cookie */ |
| if (s->version == DTLS1_VERSION || s->version == DTLS1_BAD_VER) |
| { |
| i = *(p++); |
| p+= i; |
| if (p >= limit) |
| return -1; |
| } |
| /* Skip past cipher list */ |
| n2s(p, i); |
| p+= i; |
| if (p >= limit) |
| return -1; |
| /* Skip past compression algorithm list */ |
| i = *(p++); |
| p += i; |
| if (p > limit) |
| return -1; |
| /* Now at start of extensions */ |
| if ((p + 2) >= limit) |
| return 0; |
| n2s(p, i); |
| while ((p + 4) <= limit) |
| { |
| unsigned short type, size; |
| n2s(p, type); |
| n2s(p, size); |
| if (p + size > limit) |
| return 0; |
| if (type == TLSEXT_TYPE_session_ticket) |
| { |
| int r; |
| if (size == 0) |
| { |
| /* The client will accept a ticket but doesn't |
| * currently have one. */ |
| s->tlsext_ticket_expected = 1; |
| return 1; |
| } |
| if (s->tls_session_secret_cb) |
| { |
| /* Indicate that the ticket couldn't be |
| * decrypted rather than generating the session |
| * from ticket now, trigger abbreviated |
| * handshake based on external mechanism to |
| * calculate the master secret later. */ |
| return 2; |
| } |
| r = tls_decrypt_ticket(s, p, size, session_id, len, ret); |
| switch (r) |
| { |
| case 2: /* ticket couldn't be decrypted */ |
| s->tlsext_ticket_expected = 1; |
| return 2; |
| case 3: /* ticket was decrypted */ |
| return r; |
| case 4: /* ticket decrypted but need to renew */ |
| s->tlsext_ticket_expected = 1; |
| return 3; |
| default: /* fatal error */ |
| return -1; |
| } |
| } |
| p += size; |
| } |
| return 0; |
| } |
| |
| /* tls_decrypt_ticket attempts to decrypt a session ticket. |
| * |
| * etick: points to the body of the session ticket extension. |
| * eticklen: the length of the session tickets extenion. |
| * sess_id: points at the session ID. |
| * sesslen: the length of the session ID. |
| * psess: (output) on return, if a ticket was decrypted, then this is set to |
| * point to the resulting session. |
| * |
| * Returns: |
| * -1: fatal error, either from parsing or decrypting the ticket. |
| * 2: the ticket couldn't be decrypted. |
| * 3: a ticket was successfully decrypted and *psess was set. |
| * 4: same as 3, but the ticket needs to be renewed. |
| */ |
| static int tls_decrypt_ticket(SSL *s, const unsigned char *etick, int eticklen, |
| const unsigned char *sess_id, int sesslen, |
| SSL_SESSION **psess) |
| { |
| SSL_SESSION *sess; |
| unsigned char *sdec; |
| const unsigned char *p; |
| int slen, mlen, renew_ticket = 0; |
| unsigned char tick_hmac[EVP_MAX_MD_SIZE]; |
| HMAC_CTX hctx; |
| EVP_CIPHER_CTX ctx; |
| SSL_CTX *tctx = s->initial_ctx; |
| /* Need at least keyname + iv + some encrypted data */ |
| if (eticklen < 48) |
| return 2; |
| /* Initialize session ticket encryption and HMAC contexts */ |
| HMAC_CTX_init(&hctx); |
| EVP_CIPHER_CTX_init(&ctx); |
| if (tctx->tlsext_ticket_key_cb) |
| { |
| unsigned char *nctick = (unsigned char *)etick; |
| int rv = tctx->tlsext_ticket_key_cb(s, nctick, nctick + 16, |
| &ctx, &hctx, 0); |
| if (rv < 0) |
| return -1; |
| if (rv == 0) |
| return 2; |
| if (rv == 2) |
| renew_ticket = 1; |
| } |
| else |
| { |
| /* Check key name matches */ |
| if (memcmp(etick, tctx->tlsext_tick_key_name, 16)) |
| return 2; |
| HMAC_Init_ex(&hctx, tctx->tlsext_tick_hmac_key, 16, |
| tlsext_tick_md(), NULL); |
| EVP_DecryptInit_ex(&ctx, EVP_aes_128_cbc(), NULL, |
| tctx->tlsext_tick_aes_key, etick + 16); |
| } |
| /* Attempt to process session ticket, first conduct sanity and |
| * integrity checks on ticket. |
| */ |
| mlen = HMAC_size(&hctx); |
| if (mlen < 0) |
| { |
| EVP_CIPHER_CTX_cleanup(&ctx); |
| return -1; |
| } |
| eticklen -= mlen; |
| /* Check HMAC of encrypted ticket */ |
| HMAC_Update(&hctx, etick, eticklen); |
| HMAC_Final(&hctx, tick_hmac, NULL); |
| HMAC_CTX_cleanup(&hctx); |
| if (CRYPTO_memcmp(tick_hmac, etick + eticklen, mlen)) |
| return 2; |
| /* Attempt to decrypt session data */ |
| /* Move p after IV to start of encrypted ticket, update length */ |
| p = etick + 16 + EVP_CIPHER_CTX_iv_length(&ctx); |
| eticklen -= 16 + EVP_CIPHER_CTX_iv_length(&ctx); |
| sdec = OPENSSL_malloc(eticklen); |
| if (!sdec) |
| { |
| EVP_CIPHER_CTX_cleanup(&ctx); |
| return -1; |
| } |
| EVP_DecryptUpdate(&ctx, sdec, &slen, p, eticklen); |
| if (EVP_DecryptFinal(&ctx, sdec + slen, &mlen) <= 0) |
| return 2; |
| slen += mlen; |
| EVP_CIPHER_CTX_cleanup(&ctx); |
| p = sdec; |
| |
| sess = d2i_SSL_SESSION(NULL, &p, slen); |
| OPENSSL_free(sdec); |
| if (sess) |
| { |
| /* The session ID, if non-empty, is used by some clients to |
| * detect that the ticket has been accepted. So we copy it to |
| * the session structure. If it is empty set length to zero |
| * as required by standard. |
| */ |
| if (sesslen) |
| memcpy(sess->session_id, sess_id, sesslen); |
| sess->session_id_length = sesslen; |
| *psess = sess; |
| if (renew_ticket) |
| return 4; |
| else |
| return 3; |
| } |
| ERR_clear_error(); |
| /* For session parse failure, indicate that we need to send a new |
| * ticket. */ |
| return 2; |
| } |
| |
| /* Tables to translate from NIDs to TLS v1.2 ids */ |
| |
| typedef struct |
| { |
| int nid; |
| int id; |
| } tls12_lookup; |
| |
| static tls12_lookup tls12_md[] = { |
| #ifndef OPENSSL_NO_MD5 |
| {NID_md5, TLSEXT_hash_md5}, |
| #endif |
| #ifndef OPENSSL_NO_SHA |
| {NID_sha1, TLSEXT_hash_sha1}, |
| #endif |
| #ifndef OPENSSL_NO_SHA256 |
| {NID_sha224, TLSEXT_hash_sha224}, |
| {NID_sha256, TLSEXT_hash_sha256}, |
| #endif |
| #ifndef OPENSSL_NO_SHA512 |
| {NID_sha384, TLSEXT_hash_sha384}, |
| {NID_sha512, TLSEXT_hash_sha512} |
| #endif |
| }; |
| |
| static tls12_lookup tls12_sig[] = { |
| #ifndef OPENSSL_NO_RSA |
| {EVP_PKEY_RSA, TLSEXT_signature_rsa}, |
| #endif |
| #ifndef OPENSSL_NO_DSA |
| {EVP_PKEY_DSA, TLSEXT_signature_dsa}, |
| #endif |
| #ifndef OPENSSL_NO_ECDSA |
| {EVP_PKEY_EC, TLSEXT_signature_ecdsa} |
| #endif |
| }; |
| |
| static int tls12_find_id(int nid, tls12_lookup *table, size_t tlen) |
| { |
| size_t i; |
| for (i = 0; i < tlen; i++) |
| { |
| if (table[i].nid == nid) |
| return table[i].id; |
| } |
| return -1; |
| } |
| #if 0 |
| static int tls12_find_nid(int id, tls12_lookup *table, size_t tlen) |
| { |
| size_t i; |
| for (i = 0; i < tlen; i++) |
| { |
| if (table[i].id == id) |
| return table[i].nid; |
| } |
| return -1; |
| } |
| #endif |
| |
| int tls12_get_sigandhash(unsigned char *p, const EVP_PKEY *pk, const EVP_MD *md) |
| { |
| int sig_id, md_id; |
| if (!md) |
| return 0; |
| md_id = tls12_find_id(EVP_MD_type(md), tls12_md, |
| sizeof(tls12_md)/sizeof(tls12_lookup)); |
| if (md_id == -1) |
| return 0; |
| sig_id = tls12_get_sigid(pk); |
| if (sig_id == -1) |
| return 0; |
| p[0] = (unsigned char)md_id; |
| p[1] = (unsigned char)sig_id; |
| return 1; |
| } |
| |
| int tls12_get_sigid(const EVP_PKEY *pk) |
| { |
| return tls12_find_id(pk->type, tls12_sig, |
| sizeof(tls12_sig)/sizeof(tls12_lookup)); |
| } |
| |
| const EVP_MD *tls12_get_hash(unsigned char hash_alg) |
| { |
| switch(hash_alg) |
| { |
| #ifndef OPENSSL_NO_MD5 |
| case TLSEXT_hash_md5: |
| #ifdef OPENSSL_FIPS |
| if (FIPS_mode()) |
| return NULL; |
| #endif |
| return EVP_md5(); |
| #endif |
| #ifndef OPENSSL_NO_SHA |
| case TLSEXT_hash_sha1: |
| return EVP_sha1(); |
| #endif |
| #ifndef OPENSSL_NO_SHA256 |
| case TLSEXT_hash_sha224: |
| return EVP_sha224(); |
| |
| case TLSEXT_hash_sha256: |
| return EVP_sha256(); |
| #endif |
| #ifndef OPENSSL_NO_SHA512 |
| case TLSEXT_hash_sha384: |
| return EVP_sha384(); |
| |
| case TLSEXT_hash_sha512: |
| return EVP_sha512(); |
| #endif |
| default: |
| return NULL; |
| |
| } |
| } |
| |
| /* Set preferred digest for each key type */ |
| |
| int tls1_process_sigalgs(SSL *s, const unsigned char *data, int dsize) |
| { |
| int i, idx; |
| const EVP_MD *md; |
| CERT *c = s->cert; |
| /* Extension ignored for TLS versions below 1.2 */ |
| if (TLS1_get_version(s) < TLS1_2_VERSION) |
| return 1; |
| /* Should never happen */ |
| if (!c) |
| return 0; |
| |
| c->pkeys[SSL_PKEY_DSA_SIGN].digest = NULL; |
| c->pkeys[SSL_PKEY_RSA_SIGN].digest = NULL; |
| c->pkeys[SSL_PKEY_RSA_ENC].digest = NULL; |
| c->pkeys[SSL_PKEY_ECC].digest = NULL; |
| |
| for (i = 0; i < dsize; i += 2) |
| { |
| unsigned char hash_alg = data[i], sig_alg = data[i+1]; |
| |
| switch(sig_alg) |
| { |
| #ifndef OPENSSL_NO_RSA |
| case TLSEXT_signature_rsa: |
| idx = SSL_PKEY_RSA_SIGN; |
| break; |
| #endif |
| #ifndef OPENSSL_NO_DSA |
| case TLSEXT_signature_dsa: |
| idx = SSL_PKEY_DSA_SIGN; |
| break; |
| #endif |
| #ifndef OPENSSL_NO_ECDSA |
| case TLSEXT_signature_ecdsa: |
| idx = SSL_PKEY_ECC; |
| break; |
| #endif |
| default: |
| continue; |
| } |
| |
| if (c->pkeys[idx].digest == NULL) |
| { |
| md = tls12_get_hash(hash_alg); |
| if (md) |
| { |
| c->pkeys[idx].digest = md; |
| if (idx == SSL_PKEY_RSA_SIGN) |
| c->pkeys[SSL_PKEY_RSA_ENC].digest = md; |
| } |
| } |
| |
| } |
| |
| |
| /* Set any remaining keys to default values. NOTE: if alg is not |
| * supported it stays as NULL. |
| */ |
| #ifndef OPENSSL_NO_DSA |
| if (!c->pkeys[SSL_PKEY_DSA_SIGN].digest) |
| c->pkeys[SSL_PKEY_DSA_SIGN].digest = EVP_sha1(); |
| #endif |
| #ifndef OPENSSL_NO_RSA |
| if (!c->pkeys[SSL_PKEY_RSA_SIGN].digest) |
| { |
| c->pkeys[SSL_PKEY_RSA_SIGN].digest = EVP_sha1(); |
| c->pkeys[SSL_PKEY_RSA_ENC].digest = EVP_sha1(); |
| } |
| #endif |
| #ifndef OPENSSL_NO_ECDSA |
| if (!c->pkeys[SSL_PKEY_ECC].digest) |
| c->pkeys[SSL_PKEY_ECC].digest = EVP_sha1(); |
| #endif |
| return 1; |
| } |
| |
| #endif |
| |
| #ifndef OPENSSL_NO_HEARTBEATS |
| int |
| tls1_process_heartbeat(SSL *s) |
| { |
| unsigned char *p = &s->s3->rrec.data[0], *pl; |
| unsigned short hbtype; |
| unsigned int payload; |
| unsigned int padding = 16; /* Use minimum padding */ |
| |
| /* Read type and payload length first */ |
| hbtype = *p++; |
| n2s(p, payload); |
| pl = p; |
| |
| if (s->msg_callback) |
| s->msg_callback(0, s->version, TLS1_RT_HEARTBEAT, |
| &s->s3->rrec.data[0], s->s3->rrec.length, |
| s, s->msg_callback_arg); |
| |
| if (hbtype == TLS1_HB_REQUEST) |
| { |
| unsigned char *buffer, *bp; |
| int r; |
| |
| /* Allocate memory for the response, size is 1 bytes |
| * message type, plus 2 bytes payload length, plus |
| * payload, plus padding |
| */ |
| buffer = OPENSSL_malloc(1 + 2 + payload + padding); |
| bp = buffer; |
| |
| /* Enter response type, length and copy payload */ |
| *bp++ = TLS1_HB_RESPONSE; |
| s2n(payload, bp); |
| memcpy(bp, pl, payload); |
| bp += payload; |
| /* Random padding */ |
| RAND_pseudo_bytes(bp, padding); |
| |
| r = ssl3_write_bytes(s, TLS1_RT_HEARTBEAT, buffer, 3 + payload + padding); |
| |
| if (r >= 0 && s->msg_callback) |
| s->msg_callback(1, s->version, TLS1_RT_HEARTBEAT, |
| buffer, 3 + payload + padding, |
| s, s->msg_callback_arg); |
| |
| OPENSSL_free(buffer); |
| |
| if (r < 0) |
| return r; |
| } |
| else if (hbtype == TLS1_HB_RESPONSE) |
| { |
| unsigned int seq; |
| |
| /* We only send sequence numbers (2 bytes unsigned int), |
| * and 16 random bytes, so we just try to read the |
| * sequence number */ |
| n2s(pl, seq); |
| |
| if (payload == 18 && seq == s->tlsext_hb_seq) |
| { |
| s->tlsext_hb_seq++; |
| s->tlsext_hb_pending = 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int |
| tls1_heartbeat(SSL *s) |
| { |
| unsigned char *buf, *p; |
| int ret; |
| unsigned int payload = 18; /* Sequence number + random bytes */ |
| unsigned int padding = 16; /* Use minimum padding */ |
| |
| /* Only send if peer supports and accepts HB requests... */ |
| if (!(s->tlsext_heartbeat & SSL_TLSEXT_HB_ENABLED) || |
| s->tlsext_heartbeat & SSL_TLSEXT_HB_DONT_SEND_REQUESTS) |
| { |
| SSLerr(SSL_F_TLS1_HEARTBEAT,SSL_R_TLS_HEARTBEAT_PEER_DOESNT_ACCEPT); |
| return -1; |
| } |
| |
| /* ...and there is none in flight yet... */ |
| if (s->tlsext_hb_pending) |
| { |
| SSLerr(SSL_F_TLS1_HEARTBEAT,SSL_R_TLS_HEARTBEAT_PENDING); |
| return -1; |
| } |
| |
| /* ...and no handshake in progress. */ |
| if (SSL_in_init(s) || s->in_handshake) |
| { |
| SSLerr(SSL_F_TLS1_HEARTBEAT,SSL_R_UNEXPECTED_MESSAGE); |
| return -1; |
| } |
| |
| /* Check if padding is too long, payload and padding |
| * must not exceed 2^14 - 3 = 16381 bytes in total. |
| */ |
| OPENSSL_assert(payload + padding <= 16381); |
| |
| /* Create HeartBeat message, we just use a sequence number |
| * as payload to distuingish different messages and add |
| * some random stuff. |
| * - Message Type, 1 byte |
| * - Payload Length, 2 bytes (unsigned int) |
| * - Payload, the sequence number (2 bytes uint) |
| * - Payload, random bytes (16 bytes uint) |
| * - Padding |
| */ |
| buf = OPENSSL_malloc(1 + 2 + payload + padding); |
| p = buf; |
| /* Message Type */ |
| *p++ = TLS1_HB_REQUEST; |
| /* Payload length (18 bytes here) */ |
| s2n(payload, p); |
| /* Sequence number */ |
| s2n(s->tlsext_hb_seq, p); |
| /* 16 random bytes */ |
| RAND_pseudo_bytes(p, 16); |
| p += 16; |
| /* Random padding */ |
| RAND_pseudo_bytes(p, padding); |
| |
| ret = ssl3_write_bytes(s, TLS1_RT_HEARTBEAT, buf, 3 + payload + padding); |
| if (ret >= 0) |
| { |
| if (s->msg_callback) |
| s->msg_callback(1, s->version, TLS1_RT_HEARTBEAT, |
| buf, 3 + payload + padding, |
| s, s->msg_callback_arg); |
| |
| s->tlsext_hb_pending = 1; |
| } |
| |
| OPENSSL_free(buf); |
| |
| return ret; |
| } |
| #endif |
| |
| #if !defined(OPENSSL_NO_TLSEXT) |
| /* tls1_channel_id_hash calculates the signed data for a Channel ID on the given |
| * SSL connection and writes it to |md|. |
| */ |
| int |
| tls1_channel_id_hash(EVP_MD_CTX *md, SSL *s) |
| { |
| EVP_MD_CTX ctx; |
| unsigned char temp_digest[EVP_MAX_MD_SIZE]; |
| unsigned temp_digest_len; |
| int i; |
| static const char kClientIDMagic[] = "TLS Channel ID signature"; |
| |
| if (s->s3->handshake_buffer) |
| if (!ssl3_digest_cached_records(s)) |
| return 0; |
| |
| EVP_DigestUpdate(md, kClientIDMagic, sizeof(kClientIDMagic)); |
| |
| EVP_MD_CTX_init(&ctx); |
| for (i = 0; i < SSL_MAX_DIGEST; i++) |
| { |
| if (s->s3->handshake_dgst[i] == NULL) |
| continue; |
| EVP_MD_CTX_copy_ex(&ctx, s->s3->handshake_dgst[i]); |
| EVP_DigestFinal_ex(&ctx, temp_digest, &temp_digest_len); |
| EVP_DigestUpdate(md, temp_digest, temp_digest_len); |
| } |
| EVP_MD_CTX_cleanup(&ctx); |
| |
| return 1; |
| } |
| #endif |