| commit 15a86b921a7eaa190a22a0a369e4e99beb91f5ad |
| Author: Adam Langley <agl@chromium.org> |
| Date: Mon Mar 26 17:43:29 2012 -0400 |
| |
| handshake_cutthrough |
| |
| diff --git a/apps/s_client.c b/apps/s_client.c |
| index 098cce2..0e10766 100644 |
| --- a/apps/s_client.c |
| +++ b/apps/s_client.c |
| @@ -361,6 +361,7 @@ static void sc_usage(void) |
| BIO_printf(bio_err," -nextprotoneg arg - enable NPN extension, considering named protocols supported (comma-separated list)\n"); |
| # endif |
| #endif |
| + BIO_printf(bio_err," -cutthrough - enable 1-RTT full-handshake for strong ciphers\n"); |
| BIO_printf(bio_err," -legacy_renegotiation - enable use of legacy renegotiation (dangerous)\n"); |
| BIO_printf(bio_err," -use_srtp profiles - Offer SRTP key management with a colon-separated profile list\n"); |
| BIO_printf(bio_err," -keymatexport label - Export keying material using label\n"); |
| @@ -573,6 +574,7 @@ int MAIN(int argc, char **argv) |
| EVP_PKEY *key = NULL; |
| char *CApath=NULL,*CAfile=NULL,*cipher=NULL; |
| int reconnect=0,badop=0,verify=SSL_VERIFY_NONE,bugs=0; |
| + int cutthrough=0; |
| int crlf=0; |
| int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending; |
| SSL_CTX *ctx=NULL; |
| @@ -885,6 +887,8 @@ int MAIN(int argc, char **argv) |
| } |
| # endif |
| #endif |
| + else if (strcmp(*argv,"-cutthrough") == 0) |
| + cutthrough=1; |
| else if (strcmp(*argv,"-serverpref") == 0) |
| off|=SSL_OP_CIPHER_SERVER_PREFERENCE; |
| else if (strcmp(*argv,"-legacy_renegotiation") == 0) |
| @@ -1156,6 +1160,15 @@ bad: |
| SSL_CTX_set_next_proto_select_cb(ctx, next_proto_cb, &next_proto); |
| #endif |
| |
| + /* Enable handshake cutthrough for client connections using |
| + * strong ciphers. */ |
| + if (cutthrough) |
| + { |
| + int ssl_mode = SSL_CTX_get_mode(ctx); |
| + ssl_mode |= SSL_MODE_HANDSHAKE_CUTTHROUGH; |
| + SSL_CTX_set_mode(ctx, ssl_mode); |
| + } |
| + |
| if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback); |
| if (cipher != NULL) |
| if(!SSL_CTX_set_cipher_list(ctx,cipher)) { |
| diff --git a/ssl/s3_clnt.c b/ssl/s3_clnt.c |
| index 4511a91..d2ecc3e 100644 |
| --- a/ssl/s3_clnt.c |
| +++ b/ssl/s3_clnt.c |
| @@ -215,6 +215,24 @@ int ssl3_connect(SSL *s) |
| } |
| #endif |
| |
| +// BEGIN android-added |
| +#if 0 |
| +/* Send app data in separate packet, otherwise, some particular site |
| + * (only one site so far) closes the socket. http://b/2511073 |
| + * Note: there is a very small chance that two TCP packets |
| + * could be arriving at server combined into a single TCP packet, |
| + * then trigger that site to break. We haven't encounter that though. |
| + */ |
| +// END android-added |
| + if (SSL_get_mode(s) & SSL_MODE_HANDSHAKE_CUTTHROUGH) |
| + { |
| + /* Send app data along with CCS/Finished */ |
| + s->s3->flags |= SSL3_FLAGS_DELAY_CLIENT_FINISHED; |
| + } |
| + |
| +// BEGIN android-added |
| +#endif |
| +// END android-added |
| for (;;) |
| { |
| state=s->state; |
| @@ -527,14 +533,31 @@ int ssl3_connect(SSL *s) |
| } |
| else |
| { |
| -#ifndef OPENSSL_NO_TLSEXT |
| - /* Allow NewSessionTicket if ticket expected */ |
| - if (s->tlsext_ticket_expected) |
| - s->s3->tmp.next_state=SSL3_ST_CR_SESSION_TICKET_A; |
| + if ((SSL_get_mode(s) & SSL_MODE_HANDSHAKE_CUTTHROUGH) && SSL_get_cipher_bits(s, NULL) >= 128 |
| + && s->s3->previous_server_finished_len == 0 /* no cutthrough on renegotiation (would complicate the state machine) */ |
| + ) |
| + { |
| + if (s->s3->flags & SSL3_FLAGS_DELAY_CLIENT_FINISHED) |
| + { |
| + s->state=SSL3_ST_CUTTHROUGH_COMPLETE; |
| + s->s3->flags|=SSL3_FLAGS_POP_BUFFER; |
| + s->s3->delay_buf_pop_ret=0; |
| + } |
| + else |
| + { |
| + s->s3->tmp.next_state=SSL3_ST_CUTTHROUGH_COMPLETE; |
| + } |
| + } |
| else |
| + { |
| +#ifndef OPENSSL_NO_TLSEXT |
| + /* Allow NewSessionTicket if ticket expected */ |
| + if (s->tlsext_ticket_expected) |
| + s->s3->tmp.next_state=SSL3_ST_CR_SESSION_TICKET_A; |
| + else |
| #endif |
| - |
| - s->s3->tmp.next_state=SSL3_ST_CR_FINISHED_A; |
| + s->s3->tmp.next_state=SSL3_ST_CR_FINISHED_A; |
| + } |
| } |
| s->init_num=0; |
| break; |
| @@ -582,6 +605,24 @@ int ssl3_connect(SSL *s) |
| s->state=s->s3->tmp.next_state; |
| break; |
| |
| + case SSL3_ST_CUTTHROUGH_COMPLETE: |
| +#ifndef OPENSSL_NO_TLSEXT |
| + /* Allow NewSessionTicket if ticket expected */ |
| + if (s->tlsext_ticket_expected) |
| + s->state=SSL3_ST_CR_SESSION_TICKET_A; |
| + else |
| +#endif |
| + s->state=SSL3_ST_CR_FINISHED_A; |
| + |
| + /* SSL_write() will take care of flushing buffered data if |
| + * DELAY_CLIENT_FINISHED is set. |
| + */ |
| + if (!(s->s3->flags & SSL3_FLAGS_DELAY_CLIENT_FINISHED)) |
| + ssl_free_wbio_buffer(s); |
| + ret = 1; |
| + goto end; |
| + /* break; */ |
| + |
| case SSL_ST_OK: |
| /* clean a few things up */ |
| ssl3_cleanup_key_block(s); |
| diff --git a/ssl/s3_lib.c b/ssl/s3_lib.c |
| index db75479..a2ea25a 100644 |
| --- a/ssl/s3_lib.c |
| +++ b/ssl/s3_lib.c |
| @@ -4199,9 +4199,22 @@ int ssl3_write(SSL *s, const void *buf, int len) |
| |
| static int ssl3_read_internal(SSL *s, void *buf, int len, int peek) |
| { |
| - int ret; |
| + int n,ret; |
| |
| clear_sys_error(); |
| + if ((s->s3->flags & SSL3_FLAGS_POP_BUFFER) && (s->wbio == s->bbio)) |
| + { |
| + /* Deal with an application that calls SSL_read() when handshake data |
| + * is yet to be written. |
| + */ |
| + if (BIO_wpending(s->wbio) > 0) |
| + { |
| + s->rwstate=SSL_WRITING; |
| + n=BIO_flush(s->wbio); |
| + if (n <= 0) return(n); |
| + s->rwstate=SSL_NOTHING; |
| + } |
| + } |
| if (s->s3->renegotiate) ssl3_renegotiate_check(s); |
| s->s3->in_read_app_data=1; |
| ret=s->method->ssl_read_bytes(s,SSL3_RT_APPLICATION_DATA,buf,len,peek); |
| diff --git a/ssl/ssl.h b/ssl/ssl.h |
| index 72ed766..ceaf647 100644 |
| --- a/ssl/ssl.h |
| +++ b/ssl/ssl.h |
| @@ -638,6 +638,10 @@ struct ssl_session_st |
| * TLS only.) "Released" buffers are put onto a free-list in the context |
| * or just freed (depending on the context's setting for freelist_max_len). */ |
| #define SSL_MODE_RELEASE_BUFFERS 0x00000010L |
| +/* When set, clients may send application data before receipt of CCS |
| + * and Finished. This mode enables full-handshakes to 'complete' in |
| + * one RTT. */ |
| +#define SSL_MODE_HANDSHAKE_CUTTHROUGH 0x00000020L |
| |
| /* Note: SSL[_CTX]_set_{options,mode} use |= op on the previous value, |
| * they cannot be used to clear bits. */ |
| @@ -1410,10 +1414,12 @@ extern "C" { |
| /* Is the SSL_connection established? */ |
| #define SSL_get_state(a) SSL_state(a) |
| #define SSL_is_init_finished(a) (SSL_state(a) == SSL_ST_OK) |
| -#define SSL_in_init(a) (SSL_state(a)&SSL_ST_INIT) |
| +#define SSL_in_init(a) ((SSL_state(a)&SSL_ST_INIT) && \ |
| + !SSL_cutthrough_complete(a)) |
| #define SSL_in_before(a) (SSL_state(a)&SSL_ST_BEFORE) |
| #define SSL_in_connect_init(a) (SSL_state(a)&SSL_ST_CONNECT) |
| #define SSL_in_accept_init(a) (SSL_state(a)&SSL_ST_ACCEPT) |
| +int SSL_cutthrough_complete(const SSL *s); |
| |
| /* The following 2 states are kept in ssl->rstate when reads fail, |
| * you should not need these */ |
| diff --git a/ssl/ssl3.h b/ssl/ssl3.h |
| index 112e627..556ffc1 100644 |
| --- a/ssl/ssl3.h |
| +++ b/ssl/ssl3.h |
| @@ -547,6 +547,7 @@ typedef struct ssl3_state_st |
| /*client */ |
| /* extra state */ |
| #define SSL3_ST_CW_FLUSH (0x100|SSL_ST_CONNECT) |
| +#define SSL3_ST_CUTTHROUGH_COMPLETE (0x101|SSL_ST_CONNECT) |
| #ifndef OPENSSL_NO_SCTP |
| #define DTLS1_SCTP_ST_CW_WRITE_SOCK (0x310|SSL_ST_CONNECT) |
| #define DTLS1_SCTP_ST_CR_READ_SOCK (0x320|SSL_ST_CONNECT) |
| diff --git a/ssl/ssl_lib.c b/ssl/ssl_lib.c |
| index f82d071..518f152 100644 |
| --- a/ssl/ssl_lib.c |
| +++ b/ssl/ssl_lib.c |
| @@ -3211,6 +3211,19 @@ void SSL_set_msg_callback(SSL *ssl, void (*cb)(int write_p, int version, int con |
| SSL_callback_ctrl(ssl, SSL_CTRL_SET_MSG_CALLBACK, (void (*)(void))cb); |
| } |
| |
| +int SSL_cutthrough_complete(const SSL *s) |
| + { |
| + return (!s->server && /* cutthrough only applies to clients */ |
| + !s->hit && /* full-handshake */ |
| + s->version >= SSL3_VERSION && |
| + s->s3->in_read_app_data == 0 && /* cutthrough only applies to write() */ |
| + (SSL_get_mode((SSL*)s) & SSL_MODE_HANDSHAKE_CUTTHROUGH) && /* cutthrough enabled */ |
| + SSL_get_cipher_bits(s, NULL) >= 128 && /* strong cipher choosen */ |
| + s->s3->previous_server_finished_len == 0 && /* not a renegotiation handshake */ |
| + (s->state == SSL3_ST_CR_SESSION_TICKET_A || /* ready to write app-data*/ |
| + s->state == SSL3_ST_CR_FINISHED_A)); |
| + } |
| + |
| /* Allocates new EVP_MD_CTX and sets pointer to it into given pointer |
| * vairable, freeing EVP_MD_CTX previously stored in that variable, if |
| * any. If EVP_MD pointer is passed, initializes ctx with this md |
| diff --git a/ssl/ssltest.c b/ssl/ssltest.c |
| index 0f8fd39..02ce4ec 100644 |
| --- a/ssl/ssltest.c |
| +++ b/ssl/ssltest.c |
| @@ -369,6 +369,7 @@ static void sv_usage(void) |
| " (default is sect163r2).\n"); |
| #endif |
| fprintf(stderr," -test_cipherlist - verifies the order of the ssl cipher lists\n"); |
| + fprintf(stderr," -cutthrough - enable 1-RTT full-handshake for strong ciphers\n"); |
| } |
| |
| static void print_details(SSL *c_ssl, const char *prefix) |
| @@ -549,6 +550,7 @@ int main(int argc, char *argv[]) |
| #ifdef OPENSSL_FIPS |
| int fips_mode=0; |
| #endif |
| + int cutthrough = 0; |
| |
| verbose = 0; |
| debug = 0; |
| @@ -765,6 +767,10 @@ int main(int argc, char *argv[]) |
| { |
| test_cipherlist = 1; |
| } |
| + else if (strcmp(*argv, "-cutthrough") == 0) |
| + { |
| + cutthrough = 1; |
| + } |
| else |
| { |
| fprintf(stderr,"unknown option %s\n",*argv); |
| @@ -900,6 +906,12 @@ bad: |
| SSL_CTX_set_cipher_list(c_ctx,cipher); |
| SSL_CTX_set_cipher_list(s_ctx,cipher); |
| } |
| + if (cutthrough) |
| + { |
| + int ssl_mode = SSL_CTX_get_mode(c_ctx); |
| + ssl_mode |= SSL_MODE_HANDSHAKE_CUTTHROUGH; |
| + SSL_CTX_set_mode(c_ctx, ssl_mode); |
| + } |
| |
| #ifndef OPENSSL_NO_DH |
| if (!no_dhe) |
| diff --git a/test/testssl b/test/testssl |
| index 5ae4dc8..5dfeeeb 100644 |
| --- a/test/testssl |
| +++ b/test/testssl |
| @@ -70,6 +70,9 @@ $ssltest -client_auth $CA $extra || exit 1 |
| echo test sslv2/sslv3 with both client and server authentication |
| $ssltest -server_auth -client_auth $CA $extra || exit 1 |
| |
| +echo test sslv2/sslv3 with both client and server authentication and handshake cutthrough |
| +$ssltest -server_auth -client_auth -cutthrough $CA $extra || exit 1 |
| + |
| echo test sslv2 via BIO pair |
| $ssltest -bio_pair -ssl2 $extra || exit 1 |
| |