crypto/sha/asm/sha1-armv4-large.pl - platform/external/openssl - Git at Google

 #!/usr/bin/env perl

 # ====================================================================
 # Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
 # ====================================================================

 # sha1_block procedure for ARMv4.
 #
 # January 2007.

 # Size/performance trade-off
 # ====================================================================
 # impl		size in bytes	comp cycles[*]	measured performance
 # ====================================================================
 # thumb		304		3212		4420
 # armv4-small	392/+29%	1958/+64%	2250/+96%
 # armv4-compact	740/+89%	1552/+26%	1840/+22%
 # armv4-large	1420/+92%	1307/+19%	1370/+34%[***]
 # full unroll	~5100/+260%	~1260/+4%	~1300/+5%
 # ====================================================================
 # thumb		= same as 'small' but in Thumb instructions[**] and
 #		  with recurring code in two private functions;
 # small		= detached Xload/update, loops are folded;
 # compact	= detached Xload/update, 5x unroll;
 # large		= interleaved Xload/update, 5x unroll;
 # full unroll	= interleaved Xload/update, full unroll, estimated[!];
 #
 # [*]	Manually counted instructions in "grand" loop body. Measured
 #	performance is affected by prologue and epilogue overhead,
 #	i-cache availability, branch penalties, etc.
 # [**]	While each Thumb instruction is twice smaller, they are not as
 #	diverse as ARM ones: e.g., there are only two arithmetic
 #	instructions with 3 arguments, no [fixed] rotate, addressing
 #	modes are limited. As result it takes more instructions to do
 #	the same job in Thumb, therefore the code is never twice as
 #	small and always slower.
 # [***]	which is also ~35% better than compiler generated code. Dual-
 #	issue Cortex A8 core was measured to process input block in
 #	~990 cycles.

 # August 2010.
 #
 # Rescheduling for dual-issue pipeline resulted in 13% improvement on
 # Cortex A8 core and in absolute terms ~870 cycles per input block
 # [or 13.6 cycles per byte].

 # February 2011.
 #
 # Profiler-assisted and platform-specific optimization resulted in 10%
 # improvement on Cortex A8 core and 12.2 cycles per byte.

 while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
 open STDOUT,">$output";

 $ctx="r0";
 $inp="r1";
 $len="r2";
 $a="r3";
 $b="r4";
 $c="r5";
 $d="r6";
 $e="r7";
 $K="r8";
 $t0="r9";
 $t1="r10";
 $t2="r11";
 $t3="r12";
 $Xi="r14";
 @V=($a,$b,$c,$d,$e);

 sub Xupdate {
 my ($a,$b,$c,$d,$e,$opt1,$opt2)=@_;
 $code.=<<___;
 	ldr	$t0,[$Xi,#15*4]
 	ldr	$t1,[$Xi,#13*4]
 	ldr	$t2,[$Xi,#7*4]
 	add	$e,$K,$e,ror#2			@ E+=K_xx_xx
 	ldr	$t3,[$Xi,#2*4]
 	eor	$t0,$t0,$t1
 	eor	$t2,$t2,$t3			@ 1 cycle stall
 	eor	$t1,$c,$d			@ F_xx_xx
 	mov	$t0,$t0,ror#31
 	add	$e,$e,$a,ror#27			@ E+=ROR(A,27)
 	eor	$t0,$t0,$t2,ror#31
 	str	$t0,[$Xi,#-4]!
 	$opt1					@ F_xx_xx
 	$opt2					@ F_xx_xx
 	add	$e,$e,$t0			@ E+=X[i]
 ___
 }

 sub BODY_00_15 {
 my ($a,$b,$c,$d,$e)=@_;
 $code.=<<___;
 #if __ARM_ARCH__<7
 	ldrb	$t1,[$inp,#2]
 	ldrb	$t0,[$inp,#3]
 	ldrb	$t2,[$inp,#1]
 	add	$e,$K,$e,ror#2			@ E+=K_00_19
 	ldrb	$t3,[$inp],#4
 	orr	$t0,$t0,$t1,lsl#8
 	eor	$t1,$c,$d			@ F_xx_xx
 	orr	$t0,$t0,$t2,lsl#16
 	add	$e,$e,$a,ror#27			@ E+=ROR(A,27)
 	orr	$t0,$t0,$t3,lsl#24
 #else
 	ldr	$t0,[$inp],#4			@ handles unaligned
 	add	$e,$K,$e,ror#2			@ E+=K_00_19
 	eor	$t1,$c,$d			@ F_xx_xx
 	add	$e,$e,$a,ror#27			@ E+=ROR(A,27)
 #ifdef __ARMEL__
 	rev	$t0,$t0				@ byte swap
 #endif
 #endif
 	and	$t1,$b,$t1,ror#2
 	add	$e,$e,$t0			@ E+=X[i]
 	eor	$t1,$t1,$d,ror#2		@ F_00_19(B,C,D)
 	str	$t0,[$Xi,#-4]!
 	add	$e,$e,$t1			@ E+=F_00_19(B,C,D)
 ___
 }

 sub BODY_16_19 {
 my ($a,$b,$c,$d,$e)=@_;
 	&Xupdate(@_,"and $t1,$b,$t1,ror#2");
 $code.=<<___;
 	eor	$t1,$t1,$d,ror#2		@ F_00_19(B,C,D)
 	add	$e,$e,$t1			@ E+=F_00_19(B,C,D)
 ___
 }

 sub BODY_20_39 {
 my ($a,$b,$c,$d,$e)=@_;
 	&Xupdate(@_,"eor $t1,$b,$t1,ror#2");
 $code.=<<___;
 	add	$e,$e,$t1			@ E+=F_20_39(B,C,D)
 ___
 }

 sub BODY_40_59 {
 my ($a,$b,$c,$d,$e)=@_;
 	&Xupdate(@_,"and $t1,$b,$t1,ror#2","and $t2,$c,$d");
 $code.=<<___;
 	add	$e,$e,$t1			@ E+=F_40_59(B,C,D)
 	add	$e,$e,$t2,ror#2
 ___
 }

 $code=<<___;
 #include "arm_arch.h"

 .text

 .global	sha1_block_data_order
 .type	sha1_block_data_order,%function

 .align	2
 sha1_block_data_order:
 	stmdb	sp!,{r4-r12,lr}
 	add	$len,$inp,$len,lsl#6	@ $len to point at the end of $inp
 	ldmia	$ctx,{$a,$b,$c,$d,$e}
 .Lloop:
 	ldr	$K,.LK_00_19
 	mov	$Xi,sp
 	sub	sp,sp,#15*4
 	mov	$c,$c,ror#30
 	mov	$d,$d,ror#30
 	mov	$e,$e,ror#30		@ [6]
 .L_00_15:
 ___
 for($i=0;$i<5;$i++) {
 	&BODY_00_15(@V);	unshift(@V,pop(@V));
 }
 $code.=<<___;
 	teq	$Xi,sp
 	bne	.L_00_15		@ [((11+4)*5+2)*3]
 	sub	sp,sp,#5*4
 ___
 	&BODY_00_15(@V);	unshift(@V,pop(@V));
 	&BODY_16_19(@V);	unshift(@V,pop(@V));
 	&BODY_16_19(@V);	unshift(@V,pop(@V));
 	&BODY_16_19(@V);	unshift(@V,pop(@V));
 	&BODY_16_19(@V);	unshift(@V,pop(@V));
 $code.=<<___;

 	ldr	$K,.LK_20_39		@ [+15+16*4]
 	sub	sp,sp,#20*4
 	cmn	sp,#0			@ [+3], clear carry to denote 20_39
 .L_20_39_or_60_79:
 ___
 for($i=0;$i<5;$i++) {
 	&BODY_20_39(@V);	unshift(@V,pop(@V));
 }
 $code.=<<___;
 	teq	$Xi,sp			@ preserve carry
 	bne	.L_20_39_or_60_79	@ [+((12+3)*5+2)*4]
 	bcs	.L_done			@ [+((12+3)*5+2)*4], spare 300 bytes

 	ldr	$K,.LK_40_59
 	sub	sp,sp,#20*4		@ [+2]
 .L_40_59:
 ___
 for($i=0;$i<5;$i++) {
 	&BODY_40_59(@V);	unshift(@V,pop(@V));
 }
 $code.=<<___;
 	teq	$Xi,sp
 	bne	.L_40_59		@ [+((12+5)*5+2)*4]

 	ldr	$K,.LK_60_79
 	sub	sp,sp,#20*4
 	cmp	sp,#0			@ set carry to denote 60_79
 	b	.L_20_39_or_60_79	@ [+4], spare 300 bytes
 .L_done:
 	add	sp,sp,#80*4		@ "deallocate" stack frame
 	ldmia	$ctx,{$K,$t0,$t1,$t2,$t3}
 	add	$a,$K,$a
 	add	$b,$t0,$b
 	add	$c,$t1,$c,ror#2
 	add	$d,$t2,$d,ror#2
 	add	$e,$t3,$e,ror#2
 	stmia	$ctx,{$a,$b,$c,$d,$e}
 	teq	$inp,$len
 	bne	.Lloop			@ [+18], total 1307

 #if __ARM_ARCH__>=5
 	ldmia	sp!,{r4-r12,pc}
 #else
 	ldmia	sp!,{r4-r12,lr}
 	tst	lr,#1
 	moveq	pc,lr			@ be binary compatible with V4, yet
 	bx	lr			@ interoperable with Thumb ISA:-)
 #endif
 .align	2
 .LK_00_19:	.word	0x5a827999
 .LK_20_39:	.word	0x6ed9eba1
 .LK_40_59:	.word	0x8f1bbcdc
 .LK_60_79:	.word	0xca62c1d6
 .size	sha1_block_data_order,.-sha1_block_data_order
 .asciz	"SHA1 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
 .align	2
 ___

 $code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm;	# make it possible to compile with -march=armv4
 print $code;
 close STDOUT; # enforce flush
	#!/usr/bin/env perl

	# ====================================================================
	# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
	# project. The module is, however, dual licensed under OpenSSL and
	# CRYPTOGAMS licenses depending on where you obtain it. For further
	# details see http://www.openssl.org/~appro/cryptogams/.
	# ====================================================================

	# sha1_block procedure for ARMv4.
	#
	# January 2007.

	# Size/performance trade-off
	# ====================================================================
	# impl size in bytes comp cycles[*] measured performance
	# ====================================================================
	# thumb 304 3212 4420
	# armv4-small 392/+29% 1958/+64% 2250/+96%
	# armv4-compact 740/+89% 1552/+26% 1840/+22%
	# armv4-large 1420/+92% 1307/+19% 1370/+34%[***]
	# full unroll ~5100/+260% ~1260/+4% ~1300/+5%
	# ====================================================================
	# thumb = same as 'small' but in Thumb instructions[**] and
	# with recurring code in two private functions;
	# small = detached Xload/update, loops are folded;
	# compact = detached Xload/update, 5x unroll;
	# large = interleaved Xload/update, 5x unroll;
	# full unroll = interleaved Xload/update, full unroll, estimated[!];
	#
	# [*] Manually counted instructions in "grand" loop body. Measured
	# performance is affected by prologue and epilogue overhead,
	# i-cache availability, branch penalties, etc.
	# [**] While each Thumb instruction is twice smaller, they are not as
	# diverse as ARM ones: e.g., there are only two arithmetic
	# instructions with 3 arguments, no [fixed] rotate, addressing
	# modes are limited. As result it takes more instructions to do
	# the same job in Thumb, therefore the code is never twice as
	# small and always slower.
	# [***] which is also ~35% better than compiler generated code. Dual-
	# issue Cortex A8 core was measured to process input block in
	# ~990 cycles.

	# August 2010.
	#
	# Rescheduling for dual-issue pipeline resulted in 13% improvement on
	# Cortex A8 core and in absolute terms ~870 cycles per input block
	# [or 13.6 cycles per byte].

	# February 2011.
	#
	# Profiler-assisted and platform-specific optimization resulted in 10%
	# improvement on Cortex A8 core and 12.2 cycles per byte.

	while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
	open STDOUT,">$output";

	$ctx="r0";
	$inp="r1";
	$len="r2";
	$a="r3";
	$b="r4";
	$c="r5";
	$d="r6";
	$e="r7";
	$K="r8";
	$t0="r9";
	$t1="r10";
	$t2="r11";
	$t3="r12";
	$Xi="r14";
	@V=($a,$b,$c,$d,$e);

	sub Xupdate {
	my ($a,$b,$c,$d,$e,$opt1,$opt2)=@_;
	$code.=<<___;
	ldr $t0,[$Xi,#15*4]
	ldr $t1,[$Xi,#13*4]
	ldr $t2,[$Xi,#7*4]
	add $e,$K,$e,ror#2 @ E+=K_xx_xx
	ldr $t3,[$Xi,#2*4]
	eor $t0,$t0,$t1
	eor $t2,$t2,$t3 @ 1 cycle stall
	eor $t1,$c,$d @ F_xx_xx
	mov $t0,$t0,ror#31
	add $e,$e,$a,ror#27 @ E+=ROR(A,27)
	eor $t0,$t0,$t2,ror#31
	str $t0,[$Xi,#-4]!
	$opt1 @ F_xx_xx
	$opt2 @ F_xx_xx
	add $e,$e,$t0 @ E+=X[i]
	___
	}

	sub BODY_00_15 {
	my ($a,$b,$c,$d,$e)=@_;
	$code.=<<___;
	#if __ARM_ARCH__<7
	ldrb $t1,[$inp,#2]
	ldrb $t0,[$inp,#3]
	ldrb $t2,[$inp,#1]
	add $e,$K,$e,ror#2 @ E+=K_00_19
	ldrb $t3,[$inp],#4
	orr $t0,$t0,$t1,lsl#8
	eor $t1,$c,$d @ F_xx_xx
	orr $t0,$t0,$t2,lsl#16
	add $e,$e,$a,ror#27 @ E+=ROR(A,27)
	orr $t0,$t0,$t3,lsl#24
	#else
	ldr $t0,[$inp],#4 @ handles unaligned
	add $e,$K,$e,ror#2 @ E+=K_00_19
	eor $t1,$c,$d @ F_xx_xx
	add $e,$e,$a,ror#27 @ E+=ROR(A,27)
	#ifdef __ARMEL__
	rev $t0,$t0 @ byte swap
	#endif
	#endif
	and $t1,$b,$t1,ror#2
	add $e,$e,$t0 @ E+=X[i]
	eor $t1,$t1,$d,ror#2 @ F_00_19(B,C,D)
	str $t0,[$Xi,#-4]!
	add $e,$e,$t1 @ E+=F_00_19(B,C,D)
	___
	}

	sub BODY_16_19 {
	my ($a,$b,$c,$d,$e)=@_;
	&Xupdate(@_,"and $t1,$b,$t1,ror#2");
	$code.=<<___;
	eor $t1,$t1,$d,ror#2 @ F_00_19(B,C,D)
	add $e,$e,$t1 @ E+=F_00_19(B,C,D)
	___
	}

	sub BODY_20_39 {
	my ($a,$b,$c,$d,$e)=@_;
	&Xupdate(@_,"eor $t1,$b,$t1,ror#2");
	$code.=<<___;
	add $e,$e,$t1 @ E+=F_20_39(B,C,D)
	___
	}

	sub BODY_40_59 {
	my ($a,$b,$c,$d,$e)=@_;
	&Xupdate(@_,"and $t1,$b,$t1,ror#2","and $t2,$c,$d");
	$code.=<<___;
	add $e,$e,$t1 @ E+=F_40_59(B,C,D)
	add $e,$e,$t2,ror#2
	___
	}

	$code=<<___;
	#include "arm_arch.h"

	.text

	.global sha1_block_data_order
	.type sha1_block_data_order,%function

	.align 2
	sha1_block_data_order:
	stmdb sp!,{r4-r12,lr}
	add $len,$inp,$len,lsl#6 @ $len to point at the end of $inp
	ldmia $ctx,{$a,$b,$c,$d,$e}
	.Lloop:
	ldr $K,.LK_00_19
	mov $Xi,sp
	sub sp,sp,#15*4
	mov $c,$c,ror#30
	mov $d,$d,ror#30
	mov $e,$e,ror#30 @ [6]
	.L_00_15:
	___
	for($i=0;$i<5;$i++) {
	&BODY_00_15(@V); unshift(@V,pop(@V));
	}
	$code.=<<___;
	teq $Xi,sp
	bne .L_00_15 @ [((11+4)5+2)3]
	sub sp,sp,#5*4
	___
	&BODY_00_15(@V); unshift(@V,pop(@V));
	&BODY_16_19(@V); unshift(@V,pop(@V));
	&BODY_16_19(@V); unshift(@V,pop(@V));
	&BODY_16_19(@V); unshift(@V,pop(@V));
	&BODY_16_19(@V); unshift(@V,pop(@V));
	$code.=<<___;

	ldr $K,.LK_20_39 @ [+15+16*4]
	sub sp,sp,#20*4
	cmn sp,#0 @ [+3], clear carry to denote 20_39
	.L_20_39_or_60_79:
	___
	for($i=0;$i<5;$i++) {
	&BODY_20_39(@V); unshift(@V,pop(@V));
	}
	$code.=<<___;
	teq $Xi,sp @ preserve carry
	bne .L_20_39_or_60_79 @ [+((12+3)5+2)4]
	bcs .L_done @ [+((12+3)5+2)4], spare 300 bytes

	ldr $K,.LK_40_59
	sub sp,sp,#20*4 @ [+2]
	.L_40_59:
	___
	for($i=0;$i<5;$i++) {
	&BODY_40_59(@V); unshift(@V,pop(@V));
	}
	$code.=<<___;
	teq $Xi,sp
	bne .L_40_59 @ [+((12+5)5+2)4]

	ldr $K,.LK_60_79
	sub sp,sp,#20*4
	cmp sp,#0 @ set carry to denote 60_79
	b .L_20_39_or_60_79 @ [+4], spare 300 bytes
	.L_done:
	add sp,sp,#80*4 @ "deallocate" stack frame
	ldmia $ctx,{$K,$t0,$t1,$t2,$t3}
	add $a,$K,$a
	add $b,$t0,$b
	add $c,$t1,$c,ror#2
	add $d,$t2,$d,ror#2
	add $e,$t3,$e,ror#2
	stmia $ctx,{$a,$b,$c,$d,$e}
	teq $inp,$len
	bne .Lloop @ [+18], total 1307

	#if __ARM_ARCH__>=5
	ldmia sp!,{r4-r12,pc}
	#else
	ldmia sp!,{r4-r12,lr}
	tst lr,#1
	moveq pc,lr @ be binary compatible with V4, yet
	bx lr @ interoperable with Thumb ISA:-)
	#endif
	.align 2
	.LK_00_19: .word 0x5a827999
	.LK_20_39: .word 0x6ed9eba1
	.LK_40_59: .word 0x8f1bbcdc
	.LK_60_79: .word 0xca62c1d6
	.size sha1_block_data_order,.-sha1_block_data_order
	.asciz "SHA1 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
	.align 2
	___

	$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4
	print $code;
	close STDOUT; # enforce flush