| /* crypto/rand/randfile.c */ |
| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| |
| /* We need to define this to get macros like S_IFBLK and S_IFCHR */ |
| #if !defined(OPENSSL_SYS_VXWORKS) |
| #define _XOPEN_SOURCE 500 |
| #endif |
| |
| #include <errno.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include "e_os.h" |
| #include <openssl/crypto.h> |
| #include <openssl/rand.h> |
| #include <openssl/buffer.h> |
| |
| #ifdef OPENSSL_SYS_VMS |
| #include <unixio.h> |
| #endif |
| #ifndef NO_SYS_TYPES_H |
| # include <sys/types.h> |
| #endif |
| #ifndef OPENSSL_NO_POSIX_IO |
| # include <sys/stat.h> |
| #endif |
| |
| #ifdef _WIN32 |
| #define stat _stat |
| #define chmod _chmod |
| #define open _open |
| #define fdopen _fdopen |
| #endif |
| |
| #undef BUFSIZE |
| #define BUFSIZE 1024 |
| #define RAND_DATA 1024 |
| |
| #ifdef OPENSSL_SYS_VMS |
| /* This declaration is a nasty hack to get around vms' extension to fopen |
| * for passing in sharing options being disabled by our /STANDARD=ANSI89 */ |
| static FILE *(*const vms_fopen)(const char *, const char *, ...) = |
| (FILE *(*)(const char *, const char *, ...))fopen; |
| #define VMS_OPEN_ATTRS "shr=get,put,upd,del","ctx=bin,stm","rfm=stm","rat=none","mrs=0" |
| #endif |
| |
| /* #define RFILE ".rnd" - defined in ../../e_os.h */ |
| |
| /* Note that these functions are intended for seed files only. |
| * Entropy devices and EGD sockets are handled in rand_unix.c */ |
| |
| int RAND_load_file(const char *file, long bytes) |
| { |
| /* If bytes >= 0, read up to 'bytes' bytes. |
| * if bytes == -1, read complete file. */ |
| |
| MS_STATIC unsigned char buf[BUFSIZE]; |
| #ifndef OPENSSL_NO_POSIX_IO |
| struct stat sb; |
| #endif |
| int i,ret=0,n; |
| FILE *in; |
| |
| if (file == NULL) return(0); |
| |
| #ifndef OPENSSL_NO_POSIX_IO |
| #ifdef PURIFY |
| /* struct stat can have padding and unused fields that may not be |
| * initialized in the call to stat(). We need to clear the entire |
| * structure before calling RAND_add() to avoid complaints from |
| * applications such as Valgrind. |
| */ |
| memset(&sb, 0, sizeof(sb)); |
| #endif |
| if (stat(file,&sb) < 0) return(0); |
| RAND_add(&sb,sizeof(sb),0.0); |
| #endif |
| if (bytes == 0) return(ret); |
| |
| #ifdef OPENSSL_SYS_VMS |
| in=vms_fopen(file,"rb",VMS_OPEN_ATTRS); |
| #else |
| in=fopen(file,"rb"); |
| #endif |
| if (in == NULL) goto err; |
| #if defined(S_IFBLK) && defined(S_IFCHR) && !defined(OPENSSL_NO_POSIX_IO) |
| if (sb.st_mode & (S_IFBLK | S_IFCHR)) { |
| /* this file is a device. we don't want read an infinite number |
| * of bytes from a random device, nor do we want to use buffered |
| * I/O because we will waste system entropy. |
| */ |
| bytes = (bytes == -1) ? 2048 : bytes; /* ok, is 2048 enough? */ |
| #ifndef OPENSSL_NO_SETVBUF_IONBF |
| setvbuf(in, NULL, _IONBF, 0); /* don't do buffered reads */ |
| #endif /* ndef OPENSSL_NO_SETVBUF_IONBF */ |
| } |
| #endif |
| for (;;) |
| { |
| if (bytes > 0) |
| n = (bytes < BUFSIZE)?(int)bytes:BUFSIZE; |
| else |
| n = BUFSIZE; |
| i=fread(buf,1,n,in); |
| if (i <= 0) break; |
| #ifdef PURIFY |
| RAND_add(buf,i,(double)i); |
| #else |
| /* even if n != i, use the full array */ |
| RAND_add(buf,n,(double)i); |
| #endif |
| ret+=i; |
| if (bytes > 0) |
| { |
| bytes-=n; |
| if (bytes <= 0) break; |
| } |
| } |
| fclose(in); |
| OPENSSL_cleanse(buf,BUFSIZE); |
| err: |
| return(ret); |
| } |
| |
| int RAND_write_file(const char *file) |
| { |
| unsigned char buf[BUFSIZE]; |
| int i,ret=0,rand_err=0; |
| FILE *out = NULL; |
| int n; |
| #ifndef OPENSSL_NO_POSIX_IO |
| struct stat sb; |
| |
| i=stat(file,&sb); |
| if (i != -1) { |
| #if defined(S_ISBLK) && defined(S_ISCHR) |
| if (S_ISBLK(sb.st_mode) || S_ISCHR(sb.st_mode)) { |
| /* this file is a device. we don't write back to it. |
| * we "succeed" on the assumption this is some sort |
| * of random device. Otherwise attempting to write to |
| * and chmod the device causes problems. |
| */ |
| return(1); |
| } |
| #endif |
| } |
| #endif |
| |
| #if defined(O_CREAT) && !defined(OPENSSL_NO_POSIX_IO) && !defined(OPENSSL_SYS_VMS) |
| { |
| #ifndef O_BINARY |
| #define O_BINARY 0 |
| #endif |
| /* chmod(..., 0600) is too late to protect the file, |
| * permissions should be restrictive from the start */ |
| int fd = open(file, O_WRONLY|O_CREAT|O_BINARY, 0600); |
| if (fd != -1) |
| out = fdopen(fd, "wb"); |
| } |
| #endif |
| |
| #ifdef OPENSSL_SYS_VMS |
| /* VMS NOTE: Prior versions of this routine created a _new_ |
| * version of the rand file for each call into this routine, then |
| * deleted all existing versions named ;-1, and finally renamed |
| * the current version as ';1'. Under concurrent usage, this |
| * resulted in an RMS race condition in rename() which could |
| * orphan files (see vms message help for RMS$_REENT). With the |
| * fopen() calls below, openssl/VMS now shares the top-level |
| * version of the rand file. Note that there may still be |
| * conditions where the top-level rand file is locked. If so, this |
| * code will then create a new version of the rand file. Without |
| * the delete and rename code, this can result in ascending file |
| * versions that stop at version 32767, and this routine will then |
| * return an error. The remedy for this is to recode the calling |
| * application to avoid concurrent use of the rand file, or |
| * synchronize usage at the application level. Also consider |
| * whether or not you NEED a persistent rand file in a concurrent |
| * use situation. |
| */ |
| |
| out = vms_fopen(file,"rb+",VMS_OPEN_ATTRS); |
| if (out == NULL) |
| out = vms_fopen(file,"wb",VMS_OPEN_ATTRS); |
| #else |
| if (out == NULL) |
| out = fopen(file,"wb"); |
| #endif |
| if (out == NULL) goto err; |
| |
| #ifndef NO_CHMOD |
| chmod(file,0600); |
| #endif |
| n=RAND_DATA; |
| for (;;) |
| { |
| i=(n > BUFSIZE)?BUFSIZE:n; |
| n-=BUFSIZE; |
| if (RAND_bytes(buf,i) <= 0) |
| rand_err=1; |
| i=fwrite(buf,1,i,out); |
| if (i <= 0) |
| { |
| ret=0; |
| break; |
| } |
| ret+=i; |
| if (n <= 0) break; |
| } |
| |
| fclose(out); |
| OPENSSL_cleanse(buf,BUFSIZE); |
| err: |
| return (rand_err ? -1 : ret); |
| } |
| |
| const char *RAND_file_name(char *buf, size_t size) |
| { |
| char *s=NULL; |
| #ifdef __OpenBSD__ |
| struct stat sb; |
| #endif |
| |
| if (OPENSSL_issetugid() == 0) |
| s=getenv("RANDFILE"); |
| if (s != NULL && *s && strlen(s) + 1 < size) |
| { |
| if (BUF_strlcpy(buf,s,size) >= size) |
| return NULL; |
| } |
| else |
| { |
| if (OPENSSL_issetugid() == 0) |
| s=getenv("HOME"); |
| #ifdef DEFAULT_HOME |
| if (s == NULL) |
| { |
| s = DEFAULT_HOME; |
| } |
| #endif |
| if (s && *s && strlen(s)+strlen(RFILE)+2 < size) |
| { |
| BUF_strlcpy(buf,s,size); |
| #ifndef OPENSSL_SYS_VMS |
| BUF_strlcat(buf,"/",size); |
| #endif |
| BUF_strlcat(buf,RFILE,size); |
| } |
| else |
| buf[0] = '\0'; /* no file name */ |
| } |
| |
| #ifdef __OpenBSD__ |
| /* given that all random loads just fail if the file can't be |
| * seen on a stat, we stat the file we're returning, if it |
| * fails, use /dev/arandom instead. this allows the user to |
| * use their own source for good random data, but defaults |
| * to something hopefully decent if that isn't available. |
| */ |
| |
| if (!buf[0]) |
| if (BUF_strlcpy(buf,"/dev/arandom",size) >= size) { |
| return(NULL); |
| } |
| if (stat(buf,&sb) == -1) |
| if (BUF_strlcpy(buf,"/dev/arandom",size) >= size) { |
| return(NULL); |
| } |
| |
| #endif |
| return(buf); |
| } |