| #!/usr/bin/env perl |
| # |
| # ==================================================================== |
| # Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL |
| # project. The module is, however, dual licensed under OpenSSL and |
| # CRYPTOGAMS licenses depending on where you obtain it. For further |
| # details see http://www.openssl.org/~appro/cryptogams/. |
| # ==================================================================== |
| # |
| # sha1_block procedure for x86_64. |
| # |
| # It was brought to my attention that on EM64T compiler-generated code |
| # was far behind 32-bit assembler implementation. This is unlike on |
| # Opteron where compiler-generated code was only 15% behind 32-bit |
| # assembler, which originally made it hard to motivate the effort. |
| # There was suggestion to mechanically translate 32-bit code, but I |
| # dismissed it, reasoning that x86_64 offers enough register bank |
| # capacity to fully utilize SHA-1 parallelism. Therefore this fresh |
| # implementation:-) However! While 64-bit code does perform better |
| # on Opteron, I failed to beat 32-bit assembler on EM64T core. Well, |
| # x86_64 does offer larger *addressable* bank, but out-of-order core |
| # reaches for even more registers through dynamic aliasing, and EM64T |
| # core must have managed to run-time optimize even 32-bit code just as |
| # good as 64-bit one. Performance improvement is summarized in the |
| # following table: |
| # |
| # gcc 3.4 32-bit asm cycles/byte |
| # Opteron +45% +20% 6.8 |
| # Xeon P4 +65% +0% 9.9 |
| # Core2 +60% +10% 7.0 |
| |
| # August 2009. |
| # |
| # The code was revised to minimize code size and to maximize |
| # "distance" between instructions producing input to 'lea' |
| # instruction and the 'lea' instruction itself, which is essential |
| # for Intel Atom core. |
| |
| # October 2010. |
| # |
| # Add SSSE3, Supplemental[!] SSE3, implementation. The idea behind it |
| # is to offload message schedule denoted by Wt in NIST specification, |
| # or Xupdate in OpenSSL source, to SIMD unit. See sha1-586.pl module |
| # for background and implementation details. The only difference from |
| # 32-bit code is that 64-bit code doesn't have to spill @X[] elements |
| # to free temporary registers. |
| |
| # April 2011. |
| # |
| # Add AVX code path. See sha1-586.pl for further information. |
| |
| ###################################################################### |
| # Current performance is summarized in following table. Numbers are |
| # CPU clock cycles spent to process single byte (less is better). |
| # |
| # x86_64 SSSE3 AVX |
| # P4 9.8 - |
| # Opteron 6.6 - |
| # Core2 6.7 6.1/+10% - |
| # Atom 11.0 9.7/+13% - |
| # Westmere 7.1 5.6/+27% - |
| # Sandy Bridge 7.9 6.3/+25% 5.2/+51% |
| |
| $flavour = shift; |
| $output = shift; |
| if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } |
| |
| $win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/); |
| |
| $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; |
| ( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or |
| ( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or |
| die "can't locate x86_64-xlate.pl"; |
| |
| $avx=1 if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1` |
| =~ /GNU assembler version ([2-9]\.[0-9]+)/ && |
| $1>=2.19); |
| $avx=1 if (!$avx && $win64 && ($flavour =~ /nasm/ || $ENV{ASM} =~ /nasm/) && |
| `nasm -v 2>&1` =~ /NASM version ([2-9]\.[0-9]+)/ && |
| $1>=2.09); |
| $avx=1 if (!$avx && $win64 && ($flavour =~ /masm/ || $ENV{ASM} =~ /ml64/) && |
| `ml64 2>&1` =~ /Version ([0-9]+)\./ && |
| $1>=10); |
| |
| open OUT,"| \"$^X\" $xlate $flavour $output"; |
| *STDOUT=*OUT; |
| |
| $ctx="%rdi"; # 1st arg |
| $inp="%rsi"; # 2nd arg |
| $num="%rdx"; # 3rd arg |
| |
| # reassign arguments in order to produce more compact code |
| $ctx="%r8"; |
| $inp="%r9"; |
| $num="%r10"; |
| |
| $t0="%eax"; |
| $t1="%ebx"; |
| $t2="%ecx"; |
| @xi=("%edx","%ebp"); |
| $A="%esi"; |
| $B="%edi"; |
| $C="%r11d"; |
| $D="%r12d"; |
| $E="%r13d"; |
| |
| @V=($A,$B,$C,$D,$E); |
| |
| sub BODY_00_19 { |
| my ($i,$a,$b,$c,$d,$e)=@_; |
| my $j=$i+1; |
| $code.=<<___ if ($i==0); |
| mov `4*$i`($inp),$xi[0] |
| bswap $xi[0] |
| mov $xi[0],`4*$i`(%rsp) |
| ___ |
| $code.=<<___ if ($i<15); |
| mov $c,$t0 |
| mov `4*$j`($inp),$xi[1] |
| mov $a,$t2 |
| xor $d,$t0 |
| bswap $xi[1] |
| rol \$5,$t2 |
| lea 0x5a827999($xi[0],$e),$e |
| and $b,$t0 |
| mov $xi[1],`4*$j`(%rsp) |
| add $t2,$e |
| xor $d,$t0 |
| rol \$30,$b |
| add $t0,$e |
| ___ |
| $code.=<<___ if ($i>=15); |
| mov `4*($j%16)`(%rsp),$xi[1] |
| mov $c,$t0 |
| mov $a,$t2 |
| xor `4*(($j+2)%16)`(%rsp),$xi[1] |
| xor $d,$t0 |
| rol \$5,$t2 |
| xor `4*(($j+8)%16)`(%rsp),$xi[1] |
| and $b,$t0 |
| lea 0x5a827999($xi[0],$e),$e |
| xor `4*(($j+13)%16)`(%rsp),$xi[1] |
| xor $d,$t0 |
| rol \$1,$xi[1] |
| add $t2,$e |
| rol \$30,$b |
| mov $xi[1],`4*($j%16)`(%rsp) |
| add $t0,$e |
| ___ |
| unshift(@xi,pop(@xi)); |
| } |
| |
| sub BODY_20_39 { |
| my ($i,$a,$b,$c,$d,$e)=@_; |
| my $j=$i+1; |
| my $K=($i<40)?0x6ed9eba1:0xca62c1d6; |
| $code.=<<___ if ($i<79); |
| mov `4*($j%16)`(%rsp),$xi[1] |
| mov $c,$t0 |
| mov $a,$t2 |
| xor `4*(($j+2)%16)`(%rsp),$xi[1] |
| xor $b,$t0 |
| rol \$5,$t2 |
| lea $K($xi[0],$e),$e |
| xor `4*(($j+8)%16)`(%rsp),$xi[1] |
| xor $d,$t0 |
| add $t2,$e |
| xor `4*(($j+13)%16)`(%rsp),$xi[1] |
| rol \$30,$b |
| add $t0,$e |
| rol \$1,$xi[1] |
| ___ |
| $code.=<<___ if ($i<76); |
| mov $xi[1],`4*($j%16)`(%rsp) |
| ___ |
| $code.=<<___ if ($i==79); |
| mov $c,$t0 |
| mov $a,$t2 |
| xor $b,$t0 |
| lea $K($xi[0],$e),$e |
| rol \$5,$t2 |
| xor $d,$t0 |
| add $t2,$e |
| rol \$30,$b |
| add $t0,$e |
| ___ |
| unshift(@xi,pop(@xi)); |
| } |
| |
| sub BODY_40_59 { |
| my ($i,$a,$b,$c,$d,$e)=@_; |
| my $j=$i+1; |
| $code.=<<___; |
| mov `4*($j%16)`(%rsp),$xi[1] |
| mov $c,$t0 |
| mov $c,$t1 |
| xor `4*(($j+2)%16)`(%rsp),$xi[1] |
| and $d,$t0 |
| mov $a,$t2 |
| xor `4*(($j+8)%16)`(%rsp),$xi[1] |
| xor $d,$t1 |
| lea 0x8f1bbcdc($xi[0],$e),$e |
| rol \$5,$t2 |
| xor `4*(($j+13)%16)`(%rsp),$xi[1] |
| add $t0,$e |
| and $b,$t1 |
| rol \$1,$xi[1] |
| add $t1,$e |
| rol \$30,$b |
| mov $xi[1],`4*($j%16)`(%rsp) |
| add $t2,$e |
| ___ |
| unshift(@xi,pop(@xi)); |
| } |
| |
| $code.=<<___; |
| .text |
| .extern OPENSSL_ia32cap_P |
| |
| .globl sha1_block_data_order |
| .type sha1_block_data_order,\@function,3 |
| .align 16 |
| sha1_block_data_order: |
| mov OPENSSL_ia32cap_P+0(%rip),%r9d |
| mov OPENSSL_ia32cap_P+4(%rip),%r8d |
| test \$`1<<9`,%r8d # check SSSE3 bit |
| jz .Lialu |
| ___ |
| $code.=<<___ if ($avx); |
| and \$`1<<28`,%r8d # mask AVX bit |
| and \$`1<<30`,%r9d # mask "Intel CPU" bit |
| or %r9d,%r8d |
| cmp \$`1<<28|1<<30`,%r8d |
| je _avx_shortcut |
| ___ |
| $code.=<<___; |
| jmp _ssse3_shortcut |
| |
| .align 16 |
| .Lialu: |
| push %rbx |
| push %rbp |
| push %r12 |
| push %r13 |
| mov %rsp,%r11 |
| mov %rdi,$ctx # reassigned argument |
| sub \$`8+16*4`,%rsp |
| mov %rsi,$inp # reassigned argument |
| and \$-64,%rsp |
| mov %rdx,$num # reassigned argument |
| mov %r11,`16*4`(%rsp) |
| .Lprologue: |
| |
| mov 0($ctx),$A |
| mov 4($ctx),$B |
| mov 8($ctx),$C |
| mov 12($ctx),$D |
| mov 16($ctx),$E |
| jmp .Lloop |
| |
| .align 16 |
| .Lloop: |
| ___ |
| for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); } |
| for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } |
| for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); } |
| for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); } |
| $code.=<<___; |
| add 0($ctx),$A |
| add 4($ctx),$B |
| add 8($ctx),$C |
| add 12($ctx),$D |
| add 16($ctx),$E |
| mov $A,0($ctx) |
| mov $B,4($ctx) |
| mov $C,8($ctx) |
| mov $D,12($ctx) |
| mov $E,16($ctx) |
| |
| sub \$1,$num |
| lea `16*4`($inp),$inp |
| jnz .Lloop |
| |
| mov `16*4`(%rsp),%rsi |
| mov (%rsi),%r13 |
| mov 8(%rsi),%r12 |
| mov 16(%rsi),%rbp |
| mov 24(%rsi),%rbx |
| lea 32(%rsi),%rsp |
| .Lepilogue: |
| ret |
| .size sha1_block_data_order,.-sha1_block_data_order |
| ___ |
| {{{ |
| my $Xi=4; |
| my @X=map("%xmm$_",(4..7,0..3)); |
| my @Tx=map("%xmm$_",(8..10)); |
| my @V=($A,$B,$C,$D,$E)=("%eax","%ebx","%ecx","%edx","%ebp"); # size optimization |
| my @T=("%esi","%edi"); |
| my $j=0; |
| my $K_XX_XX="%r11"; |
| |
| my $_rol=sub { &rol(@_) }; |
| my $_ror=sub { &ror(@_) }; |
| |
| $code.=<<___; |
| .type sha1_block_data_order_ssse3,\@function,3 |
| .align 16 |
| sha1_block_data_order_ssse3: |
| _ssse3_shortcut: |
| push %rbx |
| push %rbp |
| push %r12 |
| lea `-64-($win64?5*16:0)`(%rsp),%rsp |
| ___ |
| $code.=<<___ if ($win64); |
| movaps %xmm6,64+0(%rsp) |
| movaps %xmm7,64+16(%rsp) |
| movaps %xmm8,64+32(%rsp) |
| movaps %xmm9,64+48(%rsp) |
| movaps %xmm10,64+64(%rsp) |
| .Lprologue_ssse3: |
| ___ |
| $code.=<<___; |
| mov %rdi,$ctx # reassigned argument |
| mov %rsi,$inp # reassigned argument |
| mov %rdx,$num # reassigned argument |
| |
| shl \$6,$num |
| add $inp,$num |
| lea K_XX_XX(%rip),$K_XX_XX |
| |
| mov 0($ctx),$A # load context |
| mov 4($ctx),$B |
| mov 8($ctx),$C |
| mov 12($ctx),$D |
| mov $B,@T[0] # magic seed |
| mov 16($ctx),$E |
| |
| movdqa 64($K_XX_XX),@X[2] # pbswap mask |
| movdqa 0($K_XX_XX),@Tx[1] # K_00_19 |
| movdqu 0($inp),@X[-4&7] # load input to %xmm[0-3] |
| movdqu 16($inp),@X[-3&7] |
| movdqu 32($inp),@X[-2&7] |
| movdqu 48($inp),@X[-1&7] |
| pshufb @X[2],@X[-4&7] # byte swap |
| add \$64,$inp |
| pshufb @X[2],@X[-3&7] |
| pshufb @X[2],@X[-2&7] |
| pshufb @X[2],@X[-1&7] |
| paddd @Tx[1],@X[-4&7] # add K_00_19 |
| paddd @Tx[1],@X[-3&7] |
| paddd @Tx[1],@X[-2&7] |
| movdqa @X[-4&7],0(%rsp) # X[]+K xfer to IALU |
| psubd @Tx[1],@X[-4&7] # restore X[] |
| movdqa @X[-3&7],16(%rsp) |
| psubd @Tx[1],@X[-3&7] |
| movdqa @X[-2&7],32(%rsp) |
| psubd @Tx[1],@X[-2&7] |
| jmp .Loop_ssse3 |
| ___ |
| |
| sub AUTOLOAD() # thunk [simplified] 32-bit style perlasm |
| { my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; |
| my $arg = pop; |
| $arg = "\$$arg" if ($arg*1 eq $arg); |
| $code .= "\t$opcode\t".join(',',$arg,reverse @_)."\n"; |
| } |
| |
| sub Xupdate_ssse3_16_31() # recall that $Xi starts wtih 4 |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 40 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| &movdqa (@X[0],@X[-3&7]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &movdqa (@Tx[0],@X[-1&7]); |
| &palignr(@X[0],@X[-4&7],8); # compose "X[-14]" in "X[0]" |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &paddd (@Tx[1],@X[-1&7]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &psrldq (@Tx[0],4); # "X[-3]", 3 dwords |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &pxor (@X[0],@X[-4&7]); # "X[0]"^="X[-16]" |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &pxor (@Tx[0],@X[-2&7]); # "X[-3]"^"X[-8]" |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &pxor (@X[0],@Tx[0]); # "X[0]"^="X[-3]"^"X[-8]" |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &movdqa (@Tx[2],@X[0]); |
| &movdqa (@Tx[0],@X[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &pslldq (@Tx[2],12); # "X[0]"<<96, extract one dword |
| &paddd (@X[0],@X[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &psrld (@Tx[0],31); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &movdqa (@Tx[1],@Tx[2]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &psrld (@Tx[2],30); |
| &por (@X[0],@Tx[0]); # "X[0]"<<<=1 |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &pslld (@Tx[1],2); |
| &pxor (@X[0],@Tx[2]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &movdqa (@Tx[2],eval(16*(($Xi)/5))."($K_XX_XX)"); # K_XX_XX |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &pxor (@X[0],@Tx[1]); # "X[0]"^=("X[0]">>96)<<<2 |
| |
| foreach (@insns) { eval; } # remaining instructions [if any] |
| |
| $Xi++; push(@X,shift(@X)); # "rotate" X[] |
| push(@Tx,shift(@Tx)); |
| } |
| |
| sub Xupdate_ssse3_32_79() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 32 to 48 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| &movdqa (@Tx[0],@X[-1&7]) if ($Xi==8); |
| eval(shift(@insns)); # body_20_39 |
| &pxor (@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]" |
| &palignr(@Tx[0],@X[-2&7],8); # compose "X[-6]" |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| |
| &pxor (@X[0],@X[-7&7]); # "X[0]"^="X[-28]" |
| eval(shift(@insns)); |
| eval(shift(@insns)) if (@insns[0] !~ /&ro[rl]/); |
| if ($Xi%5) { |
| &movdqa (@Tx[2],@Tx[1]);# "perpetuate" K_XX_XX... |
| } else { # ... or load next one |
| &movdqa (@Tx[2],eval(16*($Xi/5))."($K_XX_XX)"); |
| } |
| &paddd (@Tx[1],@X[-1&7]); |
| eval(shift(@insns)); # ror |
| eval(shift(@insns)); |
| |
| &pxor (@X[0],@Tx[0]); # "X[0]"^="X[-6]" |
| eval(shift(@insns)); # body_20_39 |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| |
| &movdqa (@Tx[0],@X[0]); |
| &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # ror |
| eval(shift(@insns)); |
| |
| &pslld (@X[0],2); |
| eval(shift(@insns)); # body_20_39 |
| eval(shift(@insns)); |
| &psrld (@Tx[0],30); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # ror |
| eval(shift(@insns)); |
| |
| &por (@X[0],@Tx[0]); # "X[0]"<<<=2 |
| eval(shift(@insns)); # body_20_39 |
| eval(shift(@insns)); |
| &movdqa (@Tx[1],@X[0]) if ($Xi<19); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| eval(shift(@insns)); |
| |
| foreach (@insns) { eval; } # remaining instructions |
| |
| $Xi++; push(@X,shift(@X)); # "rotate" X[] |
| push(@Tx,shift(@Tx)); |
| } |
| |
| sub Xuplast_ssse3_80() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| eval(shift(@insns)); |
| &paddd (@Tx[1],@X[-1&7]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer IALU |
| |
| foreach (@insns) { eval; } # remaining instructions |
| |
| &cmp ($inp,$num); |
| &je (".Ldone_ssse3"); |
| |
| unshift(@Tx,pop(@Tx)); |
| |
| &movdqa (@X[2],"64($K_XX_XX)"); # pbswap mask |
| &movdqa (@Tx[1],"0($K_XX_XX)"); # K_00_19 |
| &movdqu (@X[-4&7],"0($inp)"); # load input |
| &movdqu (@X[-3&7],"16($inp)"); |
| &movdqu (@X[-2&7],"32($inp)"); |
| &movdqu (@X[-1&7],"48($inp)"); |
| &pshufb (@X[-4&7],@X[2]); # byte swap |
| &add ($inp,64); |
| |
| $Xi=0; |
| } |
| |
| sub Xloop_ssse3() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &pshufb (@X[($Xi-3)&7],@X[2]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &paddd (@X[($Xi-4)&7],@Tx[1]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &movdqa (eval(16*$Xi)."(%rsp)",@X[($Xi-4)&7]); # X[]+K xfer to IALU |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &psubd (@X[($Xi-4)&7],@Tx[1]); |
| |
| foreach (@insns) { eval; } |
| $Xi++; |
| } |
| |
| sub Xtail_ssse3() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| foreach (@insns) { eval; } |
| } |
| |
| sub body_00_19 () { |
| ( |
| '($a,$b,$c,$d,$e)=@V;'. |
| '&add ($e,eval(4*($j&15))."(%rsp)");', # X[]+K xfer |
| '&xor ($c,$d);', |
| '&mov (@T[1],$a);', # $b in next round |
| '&$_rol ($a,5);', |
| '&and (@T[0],$c);', # ($b&($c^$d)) |
| '&xor ($c,$d);', # restore $c |
| '&xor (@T[0],$d);', |
| '&add ($e,$a);', |
| '&$_ror ($b,$j?7:2);', # $b>>>2 |
| '&add ($e,@T[0]);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));' |
| ); |
| } |
| |
| sub body_20_39 () { |
| ( |
| '($a,$b,$c,$d,$e)=@V;'. |
| '&add ($e,eval(4*($j++&15))."(%rsp)");', # X[]+K xfer |
| '&xor (@T[0],$d);', # ($b^$d) |
| '&mov (@T[1],$a);', # $b in next round |
| '&$_rol ($a,5);', |
| '&xor (@T[0],$c);', # ($b^$d^$c) |
| '&add ($e,$a);', |
| '&$_ror ($b,7);', # $b>>>2 |
| '&add ($e,@T[0]);' .'unshift(@V,pop(@V)); unshift(@T,pop(@T));' |
| ); |
| } |
| |
| sub body_40_59 () { |
| ( |
| '($a,$b,$c,$d,$e)=@V;'. |
| '&mov (@T[1],$c);', |
| '&xor ($c,$d);', |
| '&add ($e,eval(4*($j++&15))."(%rsp)");', # X[]+K xfer |
| '&and (@T[1],$d);', |
| '&and (@T[0],$c);', # ($b&($c^$d)) |
| '&$_ror ($b,7);', # $b>>>2 |
| '&add ($e,@T[1]);', |
| '&mov (@T[1],$a);', # $b in next round |
| '&$_rol ($a,5);', |
| '&add ($e,@T[0]);', |
| '&xor ($c,$d);', # restore $c |
| '&add ($e,$a);' .'unshift(@V,pop(@V)); unshift(@T,pop(@T));' |
| ); |
| } |
| $code.=<<___; |
| .align 16 |
| .Loop_ssse3: |
| ___ |
| &Xupdate_ssse3_16_31(\&body_00_19); |
| &Xupdate_ssse3_16_31(\&body_00_19); |
| &Xupdate_ssse3_16_31(\&body_00_19); |
| &Xupdate_ssse3_16_31(\&body_00_19); |
| &Xupdate_ssse3_32_79(\&body_00_19); |
| &Xupdate_ssse3_32_79(\&body_20_39); |
| &Xupdate_ssse3_32_79(\&body_20_39); |
| &Xupdate_ssse3_32_79(\&body_20_39); |
| &Xupdate_ssse3_32_79(\&body_20_39); |
| &Xupdate_ssse3_32_79(\&body_20_39); |
| &Xupdate_ssse3_32_79(\&body_40_59); |
| &Xupdate_ssse3_32_79(\&body_40_59); |
| &Xupdate_ssse3_32_79(\&body_40_59); |
| &Xupdate_ssse3_32_79(\&body_40_59); |
| &Xupdate_ssse3_32_79(\&body_40_59); |
| &Xupdate_ssse3_32_79(\&body_20_39); |
| &Xuplast_ssse3_80(\&body_20_39); # can jump to "done" |
| |
| $saved_j=$j; @saved_V=@V; |
| |
| &Xloop_ssse3(\&body_20_39); |
| &Xloop_ssse3(\&body_20_39); |
| &Xloop_ssse3(\&body_20_39); |
| |
| $code.=<<___; |
| add 0($ctx),$A # update context |
| add 4($ctx),@T[0] |
| add 8($ctx),$C |
| add 12($ctx),$D |
| mov $A,0($ctx) |
| add 16($ctx),$E |
| mov @T[0],4($ctx) |
| mov @T[0],$B # magic seed |
| mov $C,8($ctx) |
| mov $D,12($ctx) |
| mov $E,16($ctx) |
| jmp .Loop_ssse3 |
| |
| .align 16 |
| .Ldone_ssse3: |
| ___ |
| $j=$saved_j; @V=@saved_V; |
| |
| &Xtail_ssse3(\&body_20_39); |
| &Xtail_ssse3(\&body_20_39); |
| &Xtail_ssse3(\&body_20_39); |
| |
| $code.=<<___; |
| add 0($ctx),$A # update context |
| add 4($ctx),@T[0] |
| add 8($ctx),$C |
| mov $A,0($ctx) |
| add 12($ctx),$D |
| mov @T[0],4($ctx) |
| add 16($ctx),$E |
| mov $C,8($ctx) |
| mov $D,12($ctx) |
| mov $E,16($ctx) |
| ___ |
| $code.=<<___ if ($win64); |
| movaps 64+0(%rsp),%xmm6 |
| movaps 64+16(%rsp),%xmm7 |
| movaps 64+32(%rsp),%xmm8 |
| movaps 64+48(%rsp),%xmm9 |
| movaps 64+64(%rsp),%xmm10 |
| ___ |
| $code.=<<___; |
| lea `64+($win64?5*16:0)`(%rsp),%rsi |
| mov 0(%rsi),%r12 |
| mov 8(%rsi),%rbp |
| mov 16(%rsi),%rbx |
| lea 24(%rsi),%rsp |
| .Lepilogue_ssse3: |
| ret |
| .size sha1_block_data_order_ssse3,.-sha1_block_data_order_ssse3 |
| ___ |
| |
| if ($avx) { |
| my $Xi=4; |
| my @X=map("%xmm$_",(4..7,0..3)); |
| my @Tx=map("%xmm$_",(8..10)); |
| my @V=($A,$B,$C,$D,$E)=("%eax","%ebx","%ecx","%edx","%ebp"); # size optimization |
| my @T=("%esi","%edi"); |
| my $j=0; |
| my $K_XX_XX="%r11"; |
| |
| my $_rol=sub { &shld(@_[0],@_) }; |
| my $_ror=sub { &shrd(@_[0],@_) }; |
| |
| $code.=<<___; |
| .type sha1_block_data_order_avx,\@function,3 |
| .align 16 |
| sha1_block_data_order_avx: |
| _avx_shortcut: |
| push %rbx |
| push %rbp |
| push %r12 |
| lea `-64-($win64?5*16:0)`(%rsp),%rsp |
| ___ |
| $code.=<<___ if ($win64); |
| movaps %xmm6,64+0(%rsp) |
| movaps %xmm7,64+16(%rsp) |
| movaps %xmm8,64+32(%rsp) |
| movaps %xmm9,64+48(%rsp) |
| movaps %xmm10,64+64(%rsp) |
| .Lprologue_avx: |
| ___ |
| $code.=<<___; |
| mov %rdi,$ctx # reassigned argument |
| mov %rsi,$inp # reassigned argument |
| mov %rdx,$num # reassigned argument |
| vzeroall |
| |
| shl \$6,$num |
| add $inp,$num |
| lea K_XX_XX(%rip),$K_XX_XX |
| |
| mov 0($ctx),$A # load context |
| mov 4($ctx),$B |
| mov 8($ctx),$C |
| mov 12($ctx),$D |
| mov $B,@T[0] # magic seed |
| mov 16($ctx),$E |
| |
| vmovdqa 64($K_XX_XX),@X[2] # pbswap mask |
| vmovdqa 0($K_XX_XX),@Tx[1] # K_00_19 |
| vmovdqu 0($inp),@X[-4&7] # load input to %xmm[0-3] |
| vmovdqu 16($inp),@X[-3&7] |
| vmovdqu 32($inp),@X[-2&7] |
| vmovdqu 48($inp),@X[-1&7] |
| vpshufb @X[2],@X[-4&7],@X[-4&7] # byte swap |
| add \$64,$inp |
| vpshufb @X[2],@X[-3&7],@X[-3&7] |
| vpshufb @X[2],@X[-2&7],@X[-2&7] |
| vpshufb @X[2],@X[-1&7],@X[-1&7] |
| vpaddd @Tx[1],@X[-4&7],@X[0] # add K_00_19 |
| vpaddd @Tx[1],@X[-3&7],@X[1] |
| vpaddd @Tx[1],@X[-2&7],@X[2] |
| vmovdqa @X[0],0(%rsp) # X[]+K xfer to IALU |
| vmovdqa @X[1],16(%rsp) |
| vmovdqa @X[2],32(%rsp) |
| jmp .Loop_avx |
| ___ |
| |
| sub Xupdate_avx_16_31() # recall that $Xi starts wtih 4 |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 40 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vpalignr(@X[0],@X[-3&7],@X[-4&7],8); # compose "X[-14]" in "X[0]" |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &vpaddd (@Tx[1],@Tx[1],@X[-1&7]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vpsrldq(@Tx[0],@X[-1&7],4); # "X[-3]", 3 dwords |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"^="X[-16]" |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &vpxor (@Tx[0],@Tx[0],@X[-2&7]); # "X[-3]"^"X[-8]" |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &vpxor (@X[0],@X[0],@Tx[0]); # "X[0]"^="X[-3]"^"X[-8]" |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vmovdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &vpsrld (@Tx[0],@X[0],31); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &vpslldq(@Tx[2],@X[0],12); # "X[0]"<<96, extract one dword |
| &vpaddd (@X[0],@X[0],@X[0]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &vpsrld (@Tx[1],@Tx[2],30); |
| &vpor (@X[0],@X[0],@Tx[0]); # "X[0]"<<<=1 |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &vpslld (@Tx[2],@Tx[2],2); |
| &vpxor (@X[0],@X[0],@Tx[1]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &vpxor (@X[0],@X[0],@Tx[2]); # "X[0]"^=("X[0]">>96)<<<2 |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vmovdqa (@Tx[2],eval(16*(($Xi)/5))."($K_XX_XX)"); # K_XX_XX |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| |
| foreach (@insns) { eval; } # remaining instructions [if any] |
| |
| $Xi++; push(@X,shift(@X)); # "rotate" X[] |
| push(@Tx,shift(@Tx)); |
| } |
| |
| sub Xupdate_avx_32_79() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 32 to 48 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| &vpalignr(@Tx[0],@X[-1&7],@X[-2&7],8); # compose "X[-6]" |
| &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]" |
| eval(shift(@insns)); # body_20_39 |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| |
| &vpxor (@X[0],@X[0],@X[-7&7]); # "X[0]"^="X[-28]" |
| eval(shift(@insns)); |
| eval(shift(@insns)) if (@insns[0] !~ /&ro[rl]/); |
| if ($Xi%5) { |
| &vmovdqa (@Tx[2],@Tx[1]);# "perpetuate" K_XX_XX... |
| } else { # ... or load next one |
| &vmovdqa (@Tx[2],eval(16*($Xi/5))."($K_XX_XX)"); |
| } |
| &vpaddd (@Tx[1],@Tx[1],@X[-1&7]); |
| eval(shift(@insns)); # ror |
| eval(shift(@insns)); |
| |
| &vpxor (@X[0],@X[0],@Tx[0]); # "X[0]"^="X[-6]" |
| eval(shift(@insns)); # body_20_39 |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| |
| &vpsrld (@Tx[0],@X[0],30); |
| &vmovdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # ror |
| eval(shift(@insns)); |
| |
| &vpslld (@X[0],@X[0],2); |
| eval(shift(@insns)); # body_20_39 |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # ror |
| eval(shift(@insns)); |
| |
| &vpor (@X[0],@X[0],@Tx[0]); # "X[0]"<<<=2 |
| eval(shift(@insns)); # body_20_39 |
| eval(shift(@insns)); |
| &vmovdqa (@Tx[1],@X[0]) if ($Xi<19); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); # rol |
| eval(shift(@insns)); |
| |
| foreach (@insns) { eval; } # remaining instructions |
| |
| $Xi++; push(@X,shift(@X)); # "rotate" X[] |
| push(@Tx,shift(@Tx)); |
| } |
| |
| sub Xuplast_avx_80() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| eval(shift(@insns)); |
| &vpaddd (@Tx[1],@Tx[1],@X[-1&7]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer IALU |
| |
| foreach (@insns) { eval; } # remaining instructions |
| |
| &cmp ($inp,$num); |
| &je (".Ldone_avx"); |
| |
| unshift(@Tx,pop(@Tx)); |
| |
| &vmovdqa(@X[2],"64($K_XX_XX)"); # pbswap mask |
| &vmovdqa(@Tx[1],"0($K_XX_XX)"); # K_00_19 |
| &vmovdqu(@X[-4&7],"0($inp)"); # load input |
| &vmovdqu(@X[-3&7],"16($inp)"); |
| &vmovdqu(@X[-2&7],"32($inp)"); |
| &vmovdqu(@X[-1&7],"48($inp)"); |
| &vpshufb(@X[-4&7],@X[-4&7],@X[2]); # byte swap |
| &add ($inp,64); |
| |
| $Xi=0; |
| } |
| |
| sub Xloop_avx() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vpshufb(@X[($Xi-3)&7],@X[($Xi-3)&7],@X[2]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vpaddd (@X[$Xi&7],@X[($Xi-4)&7],@Tx[1]); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| &vmovdqa(eval(16*$Xi)."(%rsp)",@X[$Xi&7]); # X[]+K xfer to IALU |
| eval(shift(@insns)); |
| eval(shift(@insns)); |
| |
| foreach (@insns) { eval; } |
| $Xi++; |
| } |
| |
| sub Xtail_avx() |
| { use integer; |
| my $body = shift; |
| my @insns = (&$body,&$body,&$body,&$body); # 32 instructions |
| my ($a,$b,$c,$d,$e); |
| |
| foreach (@insns) { eval; } |
| } |
| |
| $code.=<<___; |
| .align 16 |
| .Loop_avx: |
| ___ |
| &Xupdate_avx_16_31(\&body_00_19); |
| &Xupdate_avx_16_31(\&body_00_19); |
| &Xupdate_avx_16_31(\&body_00_19); |
| &Xupdate_avx_16_31(\&body_00_19); |
| &Xupdate_avx_32_79(\&body_00_19); |
| &Xupdate_avx_32_79(\&body_20_39); |
| &Xupdate_avx_32_79(\&body_20_39); |
| &Xupdate_avx_32_79(\&body_20_39); |
| &Xupdate_avx_32_79(\&body_20_39); |
| &Xupdate_avx_32_79(\&body_20_39); |
| &Xupdate_avx_32_79(\&body_40_59); |
| &Xupdate_avx_32_79(\&body_40_59); |
| &Xupdate_avx_32_79(\&body_40_59); |
| &Xupdate_avx_32_79(\&body_40_59); |
| &Xupdate_avx_32_79(\&body_40_59); |
| &Xupdate_avx_32_79(\&body_20_39); |
| &Xuplast_avx_80(\&body_20_39); # can jump to "done" |
| |
| $saved_j=$j; @saved_V=@V; |
| |
| &Xloop_avx(\&body_20_39); |
| &Xloop_avx(\&body_20_39); |
| &Xloop_avx(\&body_20_39); |
| |
| $code.=<<___; |
| add 0($ctx),$A # update context |
| add 4($ctx),@T[0] |
| add 8($ctx),$C |
| add 12($ctx),$D |
| mov $A,0($ctx) |
| add 16($ctx),$E |
| mov @T[0],4($ctx) |
| mov @T[0],$B # magic seed |
| mov $C,8($ctx) |
| mov $D,12($ctx) |
| mov $E,16($ctx) |
| jmp .Loop_avx |
| |
| .align 16 |
| .Ldone_avx: |
| ___ |
| $j=$saved_j; @V=@saved_V; |
| |
| &Xtail_avx(\&body_20_39); |
| &Xtail_avx(\&body_20_39); |
| &Xtail_avx(\&body_20_39); |
| |
| $code.=<<___; |
| vzeroall |
| |
| add 0($ctx),$A # update context |
| add 4($ctx),@T[0] |
| add 8($ctx),$C |
| mov $A,0($ctx) |
| add 12($ctx),$D |
| mov @T[0],4($ctx) |
| add 16($ctx),$E |
| mov $C,8($ctx) |
| mov $D,12($ctx) |
| mov $E,16($ctx) |
| ___ |
| $code.=<<___ if ($win64); |
| movaps 64+0(%rsp),%xmm6 |
| movaps 64+16(%rsp),%xmm7 |
| movaps 64+32(%rsp),%xmm8 |
| movaps 64+48(%rsp),%xmm9 |
| movaps 64+64(%rsp),%xmm10 |
| ___ |
| $code.=<<___; |
| lea `64+($win64?5*16:0)`(%rsp),%rsi |
| mov 0(%rsi),%r12 |
| mov 8(%rsi),%rbp |
| mov 16(%rsi),%rbx |
| lea 24(%rsi),%rsp |
| .Lepilogue_avx: |
| ret |
| .size sha1_block_data_order_avx,.-sha1_block_data_order_avx |
| ___ |
| } |
| $code.=<<___; |
| .align 64 |
| K_XX_XX: |
| .long 0x5a827999,0x5a827999,0x5a827999,0x5a827999 # K_00_19 |
| .long 0x6ed9eba1,0x6ed9eba1,0x6ed9eba1,0x6ed9eba1 # K_20_39 |
| .long 0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc # K_40_59 |
| .long 0xca62c1d6,0xca62c1d6,0xca62c1d6,0xca62c1d6 # K_60_79 |
| .long 0x00010203,0x04050607,0x08090a0b,0x0c0d0e0f # pbswap mask |
| ___ |
| }}} |
| $code.=<<___; |
| .asciz "SHA1 block transform for x86_64, CRYPTOGAMS by <appro\@openssl.org>" |
| .align 64 |
| ___ |
| |
| # EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame, |
| # CONTEXT *context,DISPATCHER_CONTEXT *disp) |
| if ($win64) { |
| $rec="%rcx"; |
| $frame="%rdx"; |
| $context="%r8"; |
| $disp="%r9"; |
| |
| $code.=<<___; |
| .extern __imp_RtlVirtualUnwind |
| .type se_handler,\@abi-omnipotent |
| .align 16 |
| se_handler: |
| push %rsi |
| push %rdi |
| push %rbx |
| push %rbp |
| push %r12 |
| push %r13 |
| push %r14 |
| push %r15 |
| pushfq |
| sub \$64,%rsp |
| |
| mov 120($context),%rax # pull context->Rax |
| mov 248($context),%rbx # pull context->Rip |
| |
| lea .Lprologue(%rip),%r10 |
| cmp %r10,%rbx # context->Rip<.Lprologue |
| jb .Lcommon_seh_tail |
| |
| mov 152($context),%rax # pull context->Rsp |
| |
| lea .Lepilogue(%rip),%r10 |
| cmp %r10,%rbx # context->Rip>=.Lepilogue |
| jae .Lcommon_seh_tail |
| |
| mov `16*4`(%rax),%rax # pull saved stack pointer |
| lea 32(%rax),%rax |
| |
| mov -8(%rax),%rbx |
| mov -16(%rax),%rbp |
| mov -24(%rax),%r12 |
| mov -32(%rax),%r13 |
| mov %rbx,144($context) # restore context->Rbx |
| mov %rbp,160($context) # restore context->Rbp |
| mov %r12,216($context) # restore context->R12 |
| mov %r13,224($context) # restore context->R13 |
| |
| jmp .Lcommon_seh_tail |
| .size se_handler,.-se_handler |
| |
| .type ssse3_handler,\@abi-omnipotent |
| .align 16 |
| ssse3_handler: |
| push %rsi |
| push %rdi |
| push %rbx |
| push %rbp |
| push %r12 |
| push %r13 |
| push %r14 |
| push %r15 |
| pushfq |
| sub \$64,%rsp |
| |
| mov 120($context),%rax # pull context->Rax |
| mov 248($context),%rbx # pull context->Rip |
| |
| mov 8($disp),%rsi # disp->ImageBase |
| mov 56($disp),%r11 # disp->HandlerData |
| |
| mov 0(%r11),%r10d # HandlerData[0] |
| lea (%rsi,%r10),%r10 # prologue label |
| cmp %r10,%rbx # context->Rip<prologue label |
| jb .Lcommon_seh_tail |
| |
| mov 152($context),%rax # pull context->Rsp |
| |
| mov 4(%r11),%r10d # HandlerData[1] |
| lea (%rsi,%r10),%r10 # epilogue label |
| cmp %r10,%rbx # context->Rip>=epilogue label |
| jae .Lcommon_seh_tail |
| |
| lea 64(%rax),%rsi |
| lea 512($context),%rdi # &context.Xmm6 |
| mov \$10,%ecx |
| .long 0xa548f3fc # cld; rep movsq |
| lea `24+64+5*16`(%rax),%rax # adjust stack pointer |
| |
| mov -8(%rax),%rbx |
| mov -16(%rax),%rbp |
| mov -24(%rax),%r12 |
| mov %rbx,144($context) # restore context->Rbx |
| mov %rbp,160($context) # restore context->Rbp |
| mov %r12,216($context) # restore cotnext->R12 |
| |
| .Lcommon_seh_tail: |
| mov 8(%rax),%rdi |
| mov 16(%rax),%rsi |
| mov %rax,152($context) # restore context->Rsp |
| mov %rsi,168($context) # restore context->Rsi |
| mov %rdi,176($context) # restore context->Rdi |
| |
| mov 40($disp),%rdi # disp->ContextRecord |
| mov $context,%rsi # context |
| mov \$154,%ecx # sizeof(CONTEXT) |
| .long 0xa548f3fc # cld; rep movsq |
| |
| mov $disp,%rsi |
| xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER |
| mov 8(%rsi),%rdx # arg2, disp->ImageBase |
| mov 0(%rsi),%r8 # arg3, disp->ControlPc |
| mov 16(%rsi),%r9 # arg4, disp->FunctionEntry |
| mov 40(%rsi),%r10 # disp->ContextRecord |
| lea 56(%rsi),%r11 # &disp->HandlerData |
| lea 24(%rsi),%r12 # &disp->EstablisherFrame |
| mov %r10,32(%rsp) # arg5 |
| mov %r11,40(%rsp) # arg6 |
| mov %r12,48(%rsp) # arg7 |
| mov %rcx,56(%rsp) # arg8, (NULL) |
| call *__imp_RtlVirtualUnwind(%rip) |
| |
| mov \$1,%eax # ExceptionContinueSearch |
| add \$64,%rsp |
| popfq |
| pop %r15 |
| pop %r14 |
| pop %r13 |
| pop %r12 |
| pop %rbp |
| pop %rbx |
| pop %rdi |
| pop %rsi |
| ret |
| .size ssse3_handler,.-ssse3_handler |
| |
| .section .pdata |
| .align 4 |
| .rva .LSEH_begin_sha1_block_data_order |
| .rva .LSEH_end_sha1_block_data_order |
| .rva .LSEH_info_sha1_block_data_order |
| .rva .LSEH_begin_sha1_block_data_order_ssse3 |
| .rva .LSEH_end_sha1_block_data_order_ssse3 |
| .rva .LSEH_info_sha1_block_data_order_ssse3 |
| ___ |
| $code.=<<___ if ($avx); |
| .rva .LSEH_begin_sha1_block_data_order_avx |
| .rva .LSEH_end_sha1_block_data_order_avx |
| .rva .LSEH_info_sha1_block_data_order_avx |
| ___ |
| $code.=<<___; |
| .section .xdata |
| .align 8 |
| .LSEH_info_sha1_block_data_order: |
| .byte 9,0,0,0 |
| .rva se_handler |
| .LSEH_info_sha1_block_data_order_ssse3: |
| .byte 9,0,0,0 |
| .rva ssse3_handler |
| .rva .Lprologue_ssse3,.Lepilogue_ssse3 # HandlerData[] |
| ___ |
| $code.=<<___ if ($avx); |
| .LSEH_info_sha1_block_data_order_avx: |
| .byte 9,0,0,0 |
| .rva ssse3_handler |
| .rva .Lprologue_avx,.Lepilogue_avx # HandlerData[] |
| ___ |
| } |
| |
| #################################################################### |
| |
| $code =~ s/\`([^\`]*)\`/eval $1/gem; |
| print $code; |
| close STDOUT; |
