| #if defined(__SUNPRO_C) && defined(__sparcv9) |
| # define ABI64 /* They've said -xarch=v9 at command line */ |
| #elif defined(__GNUC__) && defined(__arch64__) |
| # define ABI64 /* They've said -m64 at command line */ |
| #endif |
| |
| #ifdef ABI64 |
| .register %g2,#scratch |
| .register %g3,#scratch |
| # define FRAME -192 |
| # define BIAS 2047 |
| #else |
| # define FRAME -96 |
| # define BIAS 0 |
| #endif |
| |
| .text |
| .align 32 |
| .global OPENSSL_wipe_cpu |
| .type OPENSSL_wipe_cpu,#function |
| ! Keep in mind that this does not excuse us from wiping the stack! |
| ! This routine wipes registers, but not the backing store [which |
| ! resides on the stack, toward lower addresses]. To facilitate for |
| ! stack wiping I return pointer to the top of stack of the *caller*. |
| OPENSSL_wipe_cpu: |
| save %sp,FRAME,%sp |
| nop |
| #ifdef __sun |
| #include <sys/trap.h> |
| ta ST_CLEAN_WINDOWS |
| #else |
| call .walk.reg.wins |
| #endif |
| nop |
| call .PIC.zero.up |
| mov .zero-(.-4),%o0 |
| ld [%o0],%f0 |
| ld [%o0],%f1 |
| |
| subcc %g0,1,%o0 |
| ! Following is V9 "rd %ccr,%o0" instruction. However! V8 |
| ! specification says that it ("rd %asr2,%o0" in V8 terms) does |
| ! not cause illegal_instruction trap. It therefore can be used |
| ! to determine if the CPU the code is executing on is V8- or |
| ! V9-compliant, as V9 returns a distinct value of 0x99, |
| ! "negative" and "borrow" bits set in both %icc and %xcc. |
| .word 0x91408000 !rd %ccr,%o0 |
| cmp %o0,0x99 |
| bne .v8 |
| nop |
| ! Even though we do not use %fp register bank, |
| ! we wipe it as memcpy might have used it... |
| .word 0xbfa00040 !fmovd %f0,%f62 |
| .word 0xbba00040 !... |
| .word 0xb7a00040 |
| .word 0xb3a00040 |
| .word 0xafa00040 |
| .word 0xaba00040 |
| .word 0xa7a00040 |
| .word 0xa3a00040 |
| .word 0x9fa00040 |
| .word 0x9ba00040 |
| .word 0x97a00040 |
| .word 0x93a00040 |
| .word 0x8fa00040 |
| .word 0x8ba00040 |
| .word 0x87a00040 |
| .word 0x83a00040 !fmovd %f0,%f32 |
| .v8: fmovs %f1,%f31 |
| clr %o0 |
| fmovs %f0,%f30 |
| clr %o1 |
| fmovs %f1,%f29 |
| clr %o2 |
| fmovs %f0,%f28 |
| clr %o3 |
| fmovs %f1,%f27 |
| clr %o4 |
| fmovs %f0,%f26 |
| clr %o5 |
| fmovs %f1,%f25 |
| clr %o7 |
| fmovs %f0,%f24 |
| clr %l0 |
| fmovs %f1,%f23 |
| clr %l1 |
| fmovs %f0,%f22 |
| clr %l2 |
| fmovs %f1,%f21 |
| clr %l3 |
| fmovs %f0,%f20 |
| clr %l4 |
| fmovs %f1,%f19 |
| clr %l5 |
| fmovs %f0,%f18 |
| clr %l6 |
| fmovs %f1,%f17 |
| clr %l7 |
| fmovs %f0,%f16 |
| clr %i0 |
| fmovs %f1,%f15 |
| clr %i1 |
| fmovs %f0,%f14 |
| clr %i2 |
| fmovs %f1,%f13 |
| clr %i3 |
| fmovs %f0,%f12 |
| clr %i4 |
| fmovs %f1,%f11 |
| clr %i5 |
| fmovs %f0,%f10 |
| clr %g1 |
| fmovs %f1,%f9 |
| clr %g2 |
| fmovs %f0,%f8 |
| clr %g3 |
| fmovs %f1,%f7 |
| clr %g4 |
| fmovs %f0,%f6 |
| clr %g5 |
| fmovs %f1,%f5 |
| fmovs %f0,%f4 |
| fmovs %f1,%f3 |
| fmovs %f0,%f2 |
| |
| add %fp,BIAS,%i0 ! return pointer to caller´s top of stack |
| |
| ret |
| restore |
| |
| .zero: .long 0x0,0x0 |
| .PIC.zero.up: |
| retl |
| add %o0,%o7,%o0 |
| #ifdef DEBUG |
| .global walk_reg_wins |
| .type walk_reg_wins,#function |
| walk_reg_wins: |
| #endif |
| .walk.reg.wins: |
| save %sp,FRAME,%sp |
| cmp %i7,%o7 |
| be 2f |
| clr %o0 |
| cmp %o7,0 ! compiler never cleans %o7... |
| be 1f ! could have been a leaf function... |
| clr %o1 |
| call .walk.reg.wins |
| nop |
| 1: clr %o2 |
| clr %o3 |
| clr %o4 |
| clr %o5 |
| clr %o7 |
| clr %l0 |
| clr %l1 |
| clr %l2 |
| clr %l3 |
| clr %l4 |
| clr %l5 |
| clr %l6 |
| clr %l7 |
| add %o0,1,%i0 ! used for debugging |
| 2: ret |
| restore |
| .size OPENSSL_wipe_cpu,.-OPENSSL_wipe_cpu |
| |
| .global OPENSSL_atomic_add |
| .type OPENSSL_atomic_add,#function |
| .align 32 |
| OPENSSL_atomic_add: |
| #ifndef ABI64 |
| subcc %g0,1,%o2 |
| .word 0x95408000 !rd %ccr,%o2, see comment above |
| cmp %o2,0x99 |
| be .v9 |
| nop |
| save %sp,FRAME,%sp |
| ba .enter |
| nop |
| #ifdef __sun |
| ! Note that you do not have to link with libthread to call thr_yield, |
| ! as libc provides a stub, which is overloaded the moment you link |
| ! with *either* libpthread or libthread... |
| #define YIELD_CPU thr_yield |
| #else |
| ! applies at least to Linux and FreeBSD... Feedback expected... |
| #define YIELD_CPU sched_yield |
| #endif |
| .spin: call YIELD_CPU |
| nop |
| .enter: ld [%i0],%i2 |
| cmp %i2,-4096 |
| be .spin |
| mov -1,%i2 |
| swap [%i0],%i2 |
| cmp %i2,-1 |
| be .spin |
| add %i2,%i1,%i2 |
| stbar |
| st %i2,[%i0] |
| sra %i2,%g0,%i0 |
| ret |
| restore |
| .v9: |
| #endif |
| ld [%o0],%o2 |
| 1: add %o1,%o2,%o3 |
| .word 0xd7e2100a !cas [%o0],%o2,%o3, compare [%o0] with %o2 and swap %o3 |
| cmp %o2,%o3 |
| bne 1b |
| mov %o3,%o2 ! cas is always fetching to dest. register |
| add %o1,%o2,%o0 ! OpenSSL expects the new value |
| retl |
| sra %o0,%g0,%o0 ! we return signed int, remember? |
| .size OPENSSL_atomic_add,.-OPENSSL_atomic_add |
| |
| .global _sparcv9_rdtick |
| .align 32 |
| _sparcv9_rdtick: |
| subcc %g0,1,%o0 |
| .word 0x91408000 !rd %ccr,%o0 |
| cmp %o0,0x99 |
| bne .notick |
| xor %o0,%o0,%o0 |
| .word 0x91410000 !rd %tick,%o0 |
| retl |
| .word 0x93323020 !srlx %o0,32,%o1 |
| .notick: |
| retl |
| xor %o1,%o1,%o1 |
| .type _sparcv9_rdtick,#function |
| .size _sparcv9_rdtick,.-_sparcv9_rdtick |
| |
| .global _sparcv9_vis1_probe |
| .align 8 |
| _sparcv9_vis1_probe: |
| .word 0x81b00d80 !fxor %f0,%f0,%f0 |
| add %sp,BIAS+2,%o1 |
| retl |
| .word 0xc19a5a40 !ldda [%o1]ASI_FP16_P,%f0 |
| .type _sparcv9_vis1_probe,#function |
| .size _sparcv9_vis1_probe,.-_sparcv9_vis1_probe |
| |
| ! Probe and instrument VIS1 instruction. Output is number of cycles it |
| ! takes to execute rdtick and pair of VIS1 instructions. US-Tx VIS unit |
| ! is slow (documented to be 6 cycles on T2) and the core is in-order |
| ! single-issue, it should be possible to distinguish Tx reliably... |
| ! Observed return values are: |
| ! |
| ! UltraSPARC IIe 7 |
| ! UltraSPARC III 7 |
| ! UltraSPARC T1 24 |
| ! |
| ! Numbers for T2 and SPARC64 V-VII are more than welcomed. |
| ! |
| ! It would be possible to detect specifically US-T1 by instrumenting |
| ! fmul8ulx16, which is emulated on T1 and as such accounts for quite |
| ! a lot of %tick-s, couple of thousand on Linux... |
| .global _sparcv9_vis1_instrument |
| .align 8 |
| _sparcv9_vis1_instrument: |
| .word 0x91410000 !rd %tick,%o0 |
| .word 0x81b00d80 !fxor %f0,%f0,%f0 |
| .word 0x85b08d82 !fxor %f2,%f2,%f2 |
| .word 0x93410000 !rd %tick,%o1 |
| .word 0x81b00d80 !fxor %f0,%f0,%f0 |
| .word 0x85b08d82 !fxor %f2,%f2,%f2 |
| .word 0x95410000 !rd %tick,%o2 |
| .word 0x81b00d80 !fxor %f0,%f0,%f0 |
| .word 0x85b08d82 !fxor %f2,%f2,%f2 |
| .word 0x97410000 !rd %tick,%o3 |
| .word 0x81b00d80 !fxor %f0,%f0,%f0 |
| .word 0x85b08d82 !fxor %f2,%f2,%f2 |
| .word 0x99410000 !rd %tick,%o4 |
| |
| ! calculate intervals |
| sub %o1,%o0,%o0 |
| sub %o2,%o1,%o1 |
| sub %o3,%o2,%o2 |
| sub %o4,%o3,%o3 |
| |
| ! find minumum value |
| cmp %o0,%o1 |
| .word 0x38680002 !bgu,a %xcc,.+8 |
| mov %o1,%o0 |
| cmp %o0,%o2 |
| .word 0x38680002 !bgu,a %xcc,.+8 |
| mov %o2,%o0 |
| cmp %o0,%o3 |
| .word 0x38680002 !bgu,a %xcc,.+8 |
| mov %o3,%o0 |
| |
| retl |
| nop |
| .type _sparcv9_vis1_instrument,#function |
| .size _sparcv9_vis1_instrument,.-_sparcv9_vis1_instrument |
| |
| .global _sparcv9_vis2_probe |
| .align 8 |
| _sparcv9_vis2_probe: |
| retl |
| .word 0x81b00980 !bshuffle %f0,%f0,%f0 |
| .type _sparcv9_vis2_probe,#function |
| .size _sparcv9_vis2_probe,.-_sparcv9_vis2_probe |
| |
| .global _sparcv9_fmadd_probe |
| .align 8 |
| _sparcv9_fmadd_probe: |
| .word 0x81b00d80 !fxor %f0,%f0,%f0 |
| .word 0x85b08d82 !fxor %f2,%f2,%f2 |
| retl |
| .word 0x81b80440 !fmaddd %f0,%f0,%f2,%f0 |
| .type _sparcv9_fmadd_probe,#function |
| .size _sparcv9_fmadd_probe,.-_sparcv9_fmadd_probe |
| |
| .global OPENSSL_cleanse |
| .align 32 |
| OPENSSL_cleanse: |
| cmp %o1,14 |
| nop |
| #ifdef ABI64 |
| bgu %xcc,.Lot |
| #else |
| bgu .Lot |
| #endif |
| cmp %o1,0 |
| bne .Little |
| nop |
| retl |
| nop |
| |
| .Little: |
| stb %g0,[%o0] |
| subcc %o1,1,%o1 |
| bnz .Little |
| add %o0,1,%o0 |
| retl |
| nop |
| .align 32 |
| .Lot: |
| #ifndef ABI64 |
| subcc %g0,1,%g1 |
| ! see above for explanation |
| .word 0x83408000 !rd %ccr,%g1 |
| cmp %g1,0x99 |
| bne .v8lot |
| nop |
| #endif |
| |
| .v9lot: andcc %o0,7,%g0 |
| bz .v9aligned |
| nop |
| stb %g0,[%o0] |
| sub %o1,1,%o1 |
| ba .v9lot |
| add %o0,1,%o0 |
| .align 16,0x01000000 |
| .v9aligned: |
| .word 0xc0720000 !stx %g0,[%o0] |
| sub %o1,8,%o1 |
| andcc %o1,-8,%g0 |
| #ifdef ABI64 |
| .word 0x126ffffd !bnz %xcc,.v9aligned |
| #else |
| .word 0x124ffffd !bnz %icc,.v9aligned |
| #endif |
| add %o0,8,%o0 |
| |
| cmp %o1,0 |
| bne .Little |
| nop |
| retl |
| nop |
| #ifndef ABI64 |
| .v8lot: andcc %o0,3,%g0 |
| bz .v8aligned |
| nop |
| stb %g0,[%o0] |
| sub %o1,1,%o1 |
| ba .v8lot |
| add %o0,1,%o0 |
| nop |
| .v8aligned: |
| st %g0,[%o0] |
| sub %o1,4,%o1 |
| andcc %o1,-4,%g0 |
| bnz .v8aligned |
| add %o0,4,%o0 |
| |
| cmp %o1,0 |
| bne .Little |
| nop |
| retl |
| nop |
| #endif |
| .type OPENSSL_cleanse,#function |
| .size OPENSSL_cleanse,.-OPENSSL_cleanse |
| |
| .section ".init",#alloc,#execinstr |
| call OPENSSL_cpuid_setup |
| nop |
