| /* |
| * main.c - Point-to-Point Protocol main module |
| * |
| * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. The name "Carnegie Mellon University" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For permission or any legal |
| * details, please contact |
| * Office of Technology Transfer |
| * Carnegie Mellon University |
| * 5000 Forbes Avenue |
| * Pittsburgh, PA 15213-3890 |
| * (412) 268-4387, fax: (412) 268-7395 |
| * tech-transfer@andrew.cmu.edu |
| * |
| * 4. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by Computing Services |
| * at Carnegie Mellon University (http://www.cmu.edu/computing/)." |
| * |
| * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO |
| * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY |
| * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE |
| * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN |
| * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING |
| * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| * Copyright (c) 1999-2004 Paul Mackerras. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. The name(s) of the authors of this software must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. |
| * |
| * 3. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by Paul Mackerras |
| * <paulus@samba.org>". |
| * |
| * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO |
| * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY |
| * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY |
| * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN |
| * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING |
| * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #define RCSID "$Id: main.c,v 1.148 2004/11/13 12:05:48 paulus Exp $" |
| |
| #include <stdio.h> |
| #include <ctype.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <signal.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <syslog.h> |
| #include <netdb.h> |
| #include <utmp.h> |
| #include <pwd.h> |
| #include <setjmp.h> |
| #include <sys/param.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| #include <sys/time.h> |
| #include <sys/resource.h> |
| #include <sys/stat.h> |
| #include <sys/socket.h> |
| #include <netinet/in.h> |
| #include <arpa/inet.h> |
| #include <cutils/properties.h> |
| |
| #include "pppd.h" |
| #include "magic.h" |
| #include "fsm.h" |
| #include "lcp.h" |
| #include "ipcp.h" |
| #ifdef INET6 |
| #include "ipv6cp.h" |
| #endif |
| #include "upap.h" |
| #include "chap-new.h" |
| #include "eap.h" |
| #include "ccp.h" |
| #include "ecp.h" |
| #include "pathnames.h" |
| |
| #ifdef USE_TDB |
| #include "tdb.h" |
| #endif |
| |
| #ifdef CBCP_SUPPORT |
| #include "cbcp.h" |
| #endif |
| |
| #ifdef IPX_CHANGE |
| #include "ipxcp.h" |
| #endif /* IPX_CHANGE */ |
| #ifdef AT_CHANGE |
| #include "atcp.h" |
| #endif |
| |
| static const char rcsid[] = RCSID; |
| |
| /* interface vars */ |
| char ifname[32]; /* Interface name */ |
| int ifunit; /* Interface unit number */ |
| |
| struct channel *the_channel; |
| |
| char *progname; /* Name of this program */ |
| char hostname[MAXNAMELEN]; /* Our hostname */ |
| static char pidfilename[MAXPATHLEN]; /* name of pid file */ |
| static char linkpidfile[MAXPATHLEN]; /* name of linkname pid file */ |
| char ppp_devnam[MAXPATHLEN]; /* name of PPP tty (maybe ttypx) */ |
| uid_t uid; /* Our real user-id */ |
| struct notifier *pidchange = NULL; |
| struct notifier *phasechange = NULL; |
| struct notifier *exitnotify = NULL; |
| struct notifier *sigreceived = NULL; |
| struct notifier *fork_notifier = NULL; |
| |
| int hungup; /* terminal has been hung up */ |
| int privileged; /* we're running as real uid root */ |
| int need_holdoff; /* need holdoff period before restarting */ |
| int detached; /* have detached from terminal */ |
| volatile int status; /* exit status for pppd */ |
| int unsuccess; /* # unsuccessful connection attempts */ |
| int do_callback; /* != 0 if we should do callback next */ |
| int doing_callback; /* != 0 if we are doing callback */ |
| int ppp_session_number; /* Session number, for channels with such a |
| concept (eg PPPoE) */ |
| int childwait_done; /* have timed out waiting for children */ |
| |
| #ifdef USE_TDB |
| TDB_CONTEXT *pppdb; /* database for storing status etc. */ |
| #endif |
| |
| char db_key[32]; |
| |
| int (*holdoff_hook) __P((void)) = NULL; |
| int (*new_phase_hook) __P((int)) = NULL; |
| void (*snoop_recv_hook) __P((unsigned char *p, int len)) = NULL; |
| void (*snoop_send_hook) __P((unsigned char *p, int len)) = NULL; |
| |
| static int conn_running; /* we have a [dis]connector running */ |
| static int fd_loop; /* fd for getting demand-dial packets */ |
| |
| int fd_devnull; /* fd for /dev/null */ |
| int devfd = -1; /* fd of underlying device */ |
| int fd_ppp = -1; /* fd for talking PPP */ |
| int phase; /* where the link is at */ |
| int kill_link; |
| int asked_to_quit; |
| int open_ccp_flag; |
| int listen_time; |
| int got_sigusr2; |
| int got_sigterm; |
| int got_sighup; |
| |
| static sigset_t signals_handled; |
| static int waiting; |
| static sigjmp_buf sigjmp; |
| |
| char **script_env; /* Env. variable values for scripts */ |
| int s_env_nalloc; /* # words avail at script_env */ |
| |
| u_char outpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for outgoing packet */ |
| u_char inpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for incoming packet */ |
| |
| static int n_children; /* # child processes still running */ |
| static int got_sigchld; /* set if we have received a SIGCHLD */ |
| |
| int privopen; /* don't lock, open device as root */ |
| |
| char *no_ppp_msg = "Sorry - this system lacks PPP kernel support\n"; |
| |
| GIDSET_TYPE groups[NGROUPS_MAX];/* groups the user is in */ |
| int ngroups; /* How many groups valid in groups */ |
| |
| static struct timeval start_time; /* Time when link was started. */ |
| |
| static struct pppd_stats old_link_stats; |
| struct pppd_stats link_stats; |
| unsigned link_connect_time; |
| int link_stats_valid; |
| |
| int error_count; |
| |
| bool bundle_eof; |
| bool bundle_terminating; |
| |
| int sent_since_received = 0; |
| int sent_total = 0; |
| int received_total = 0; |
| |
| /* |
| * We maintain a list of child process pids and |
| * functions to call when they exit. |
| */ |
| struct subprocess { |
| pid_t pid; |
| char *prog; |
| void (*done) __P((void *)); |
| void *arg; |
| struct subprocess *next; |
| }; |
| |
| static struct subprocess *children; |
| |
| /* Prototypes for procedures local to this file. */ |
| |
| static void setup_signals __P((void)); |
| static void create_pidfile __P((int pid)); |
| static void create_linkpidfile __P((int pid)); |
| static void cleanup __P((void)); |
| static void get_input __P((void)); |
| static void calltimeout __P((void)); |
| static struct timeval *timeleft __P((struct timeval *)); |
| static void kill_my_pg __P((int)); |
| static void hup __P((int)); |
| static void term __P((int)); |
| static void chld __P((int)); |
| static void toggle_debug __P((int)); |
| static void open_ccp __P((int)); |
| static void bad_signal __P((int)); |
| static void holdoff_end __P((void *)); |
| static int reap_kids __P((void)); |
| static void childwait_end __P((void *)); |
| |
| #ifdef USE_TDB |
| static void update_db_entry __P((void)); |
| static void add_db_key __P((const char *)); |
| static void delete_db_key __P((const char *)); |
| static void cleanup_db __P((void)); |
| #endif |
| |
| static void handle_events __P((void)); |
| void print_link_stats __P((void)); |
| |
| extern char *ttyname __P((int)); |
| extern char *getlogin __P((void)); |
| int main __P((int, char *[])); |
| |
| #ifdef ultrix |
| #undef O_NONBLOCK |
| #define O_NONBLOCK O_NDELAY |
| #endif |
| |
| #ifdef ULTRIX |
| #define setlogmask(x) |
| #endif |
| |
| /* |
| * PPP Data Link Layer "protocol" table. |
| * One entry per supported protocol. |
| * The last entry must be NULL. |
| */ |
| struct protent *protocols[] = { |
| &lcp_protent, |
| &pap_protent, |
| &chap_protent, |
| #ifdef CBCP_SUPPORT |
| &cbcp_protent, |
| #endif |
| &ipcp_protent, |
| #ifdef INET6 |
| &ipv6cp_protent, |
| #endif |
| &ccp_protent, |
| &ecp_protent, |
| #ifdef IPX_CHANGE |
| &ipxcp_protent, |
| #endif |
| #ifdef AT_CHANGE |
| &atcp_protent, |
| #endif |
| &eap_protent, |
| NULL |
| }; |
| |
| /* |
| * If PPP_DRV_NAME is not defined, use the default "ppp" as the device name. |
| */ |
| #if !defined(PPP_DRV_NAME) |
| #define PPP_DRV_NAME "ppp" |
| #endif /* !defined(PPP_DRV_NAME) */ |
| |
| int |
| main(argc, argv) |
| int argc; |
| char *argv[]; |
| { |
| int i, t; |
| char *p; |
| struct passwd *pw; |
| struct protent *protp; |
| char numbuf[16]; |
| |
| link_stats_valid = 0; |
| new_phase(PHASE_INITIALIZE); |
| |
| script_env = NULL; |
| |
| /* Initialize syslog facilities */ |
| reopen_log(); |
| |
| if (gethostname(hostname, MAXNAMELEN) < 0 ) { |
| option_error("Couldn't get hostname: %m"); |
| exit(1); |
| } |
| hostname[MAXNAMELEN-1] = 0; |
| |
| /* make sure we don't create world or group writable files. */ |
| umask(umask(0777) | 022); |
| |
| uid = getuid(); |
| privileged = uid == 0; |
| slprintf(numbuf, sizeof(numbuf), "%d", uid); |
| script_setenv("ORIG_UID", numbuf, 0); |
| |
| ngroups = getgroups(NGROUPS_MAX, groups); |
| |
| /* |
| * Initialize magic number generator now so that protocols may |
| * use magic numbers in initialization. |
| */ |
| magic_init(); |
| |
| /* |
| * Initialize each protocol. |
| */ |
| for (i = 0; (protp = protocols[i]) != NULL; ++i) |
| (*protp->init)(0); |
| |
| /* |
| * Initialize the default channel. |
| */ |
| tty_init(); |
| |
| #ifdef ANDROID_CHANGES |
| { |
| extern void pppox_init(); |
| pppox_init(); |
| } |
| #endif |
| |
| progname = *argv; |
| |
| /* |
| * Parse, in order, the system options file, the user's options file, |
| * and the command line arguments. |
| */ |
| #ifdef ANDROID_CHANGES |
| /* Android: only take options from commandline */ |
| if (!parse_args(argc-1, argv+1)) |
| exit(EXIT_OPTION_ERROR); |
| |
| #else |
| if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1) |
| || !options_from_user() |
| || !parse_args(argc-1, argv+1)) |
| exit(EXIT_OPTION_ERROR); |
| |
| #endif |
| |
| devnam_fixed = 1; /* can no longer change device name */ |
| |
| /* |
| * Work out the device name, if it hasn't already been specified, |
| * and parse the tty's options file. |
| */ |
| if (the_channel->process_extra_options) |
| (*the_channel->process_extra_options)(); |
| |
| if (debug) |
| setlogmask(LOG_UPTO(LOG_DEBUG)); |
| |
| /* |
| * Check that we are running as root. |
| */ |
| if (geteuid() != 0) { |
| option_error("must be root to run %s, since it is not setuid-root", |
| argv[0]); |
| exit(EXIT_NOT_ROOT); |
| } |
| |
| if (!ppp_available()) { |
| option_error("%s", no_ppp_msg); |
| exit(EXIT_NO_KERNEL_SUPPORT); |
| } |
| |
| /* |
| * Check that the options given are valid and consistent. |
| */ |
| check_options(); |
| if (!sys_check_options()) |
| exit(EXIT_OPTION_ERROR); |
| auth_check_options(); |
| #ifdef HAVE_MULTILINK |
| mp_check_options(); |
| #endif |
| for (i = 0; (protp = protocols[i]) != NULL; ++i) |
| if (protp->check_options != NULL) |
| (*protp->check_options)(); |
| if (the_channel->check_options) |
| (*the_channel->check_options)(); |
| |
| |
| if (dump_options || dryrun) { |
| init_pr_log(NULL, LOG_INFO); |
| print_options(pr_log, NULL); |
| end_pr_log(); |
| } |
| |
| if (dryrun) |
| die(0); |
| |
| /* Make sure fds 0, 1, 2 are open to somewhere. */ |
| fd_devnull = open(_PATH_DEVNULL, O_RDWR); |
| if (fd_devnull < 0) |
| fatal("Couldn't open %s: %m", _PATH_DEVNULL); |
| while (fd_devnull <= 2) { |
| i = dup(fd_devnull); |
| if (i < 0) |
| fatal("Critical shortage of file descriptors: dup failed: %m"); |
| fd_devnull = i; |
| } |
| |
| /* |
| * Initialize system-dependent stuff. |
| */ |
| sys_init(); |
| #ifdef USE_TDB |
| pppdb = tdb_open(_PATH_PPPDB, 0, 0, O_RDWR|O_CREAT, 0644); |
| if (pppdb != NULL) { |
| slprintf(db_key, sizeof(db_key), "pppd%d", getpid()); |
| update_db_entry(); |
| } else { |
| warn("Warning: couldn't open ppp database %s", _PATH_PPPDB); |
| if (multilink) { |
| warn("Warning: disabling multilink"); |
| multilink = 0; |
| } |
| } |
| #endif |
| |
| /* |
| * Detach ourselves from the terminal, if required, |
| * and identify who is running us. |
| */ |
| if (!nodetach && !updetach) |
| detach(); |
| p = getlogin(); |
| if (p == NULL) { |
| pw = getpwuid(uid); |
| if (pw != NULL && pw->pw_name != NULL) |
| p = pw->pw_name; |
| else |
| p = "(unknown)"; |
| } |
| syslog(LOG_NOTICE, "pppd %s started by %s, uid %d", VERSION, p, uid); |
| script_setenv("PPPLOGNAME", p, 0); |
| |
| if (devnam[0]) |
| script_setenv("DEVICE", devnam, 1); |
| slprintf(numbuf, sizeof(numbuf), "%d", getpid()); |
| script_setenv("PPPD_PID", numbuf, 1); |
| |
| setup_signals(); |
| |
| create_linkpidfile(getpid()); |
| |
| waiting = 0; |
| |
| /* |
| * If we're doing dial-on-demand, set up the interface now. |
| */ |
| if (demand) { |
| /* |
| * Open the loopback channel and set it up to be the ppp interface. |
| */ |
| fd_loop = open_ppp_loopback(); |
| set_ifunit(1); |
| /* |
| * Configure the interface and mark it up, etc. |
| */ |
| demand_conf(); |
| } |
| |
| do_callback = 0; |
| for (;;) { |
| |
| bundle_eof = 0; |
| bundle_terminating = 0; |
| listen_time = 0; |
| need_holdoff = 1; |
| devfd = -1; |
| status = EXIT_OK; |
| ++unsuccess; |
| doing_callback = do_callback; |
| do_callback = 0; |
| |
| if (demand && !doing_callback) { |
| /* |
| * Don't do anything until we see some activity. |
| */ |
| new_phase(PHASE_DORMANT); |
| demand_unblock(); |
| add_fd(fd_loop); |
| for (;;) { |
| handle_events(); |
| if (asked_to_quit) |
| break; |
| if (get_loop_output()) |
| break; |
| } |
| remove_fd(fd_loop); |
| if (asked_to_quit) |
| break; |
| |
| /* |
| * Now we want to bring up the link. |
| */ |
| demand_block(); |
| info("Starting link"); |
| } |
| |
| gettimeofday(&start_time, NULL); |
| script_unsetenv("CONNECT_TIME"); |
| script_unsetenv("BYTES_SENT"); |
| script_unsetenv("BYTES_RCVD"); |
| |
| lcp_open(0); /* Start protocol */ |
| while (phase != PHASE_DEAD) { |
| handle_events(); |
| get_input(); |
| if (kill_link) |
| lcp_close(0, "User request"); |
| if (asked_to_quit) { |
| bundle_terminating = 1; |
| if (phase == PHASE_MASTER) |
| mp_bundle_terminated(); |
| } |
| if (open_ccp_flag) { |
| if (phase == PHASE_NETWORK || phase == PHASE_RUNNING) { |
| ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */ |
| (*ccp_protent.open)(0); |
| } |
| } |
| } |
| |
| if (!persist || asked_to_quit || (maxfail > 0 && unsuccess >= maxfail)) |
| break; |
| |
| if (demand) |
| demand_discard(); |
| t = need_holdoff? holdoff: 0; |
| if (holdoff_hook) |
| t = (*holdoff_hook)(); |
| if (t > 0) { |
| new_phase(PHASE_HOLDOFF); |
| TIMEOUT(holdoff_end, NULL, t); |
| do { |
| handle_events(); |
| if (kill_link) |
| new_phase(PHASE_DORMANT); /* allow signal to end holdoff */ |
| } while (phase == PHASE_HOLDOFF); |
| if (!persist) |
| break; |
| } |
| } |
| |
| /* Wait for scripts to finish */ |
| reap_kids(); |
| if (n_children > 0) { |
| if (child_wait > 0) |
| TIMEOUT(childwait_end, NULL, child_wait); |
| if (debug) { |
| struct subprocess *chp; |
| dbglog("Waiting for %d child processes...", n_children); |
| for (chp = children; chp != NULL; chp = chp->next) |
| dbglog(" script %s, pid %d", chp->prog, chp->pid); |
| } |
| while (n_children > 0 && !childwait_done) { |
| handle_events(); |
| if (kill_link && !childwait_done) |
| childwait_end(NULL); |
| } |
| } |
| |
| die(status); |
| return 0; |
| } |
| |
| /* |
| * handle_events - wait for something to happen and respond to it. |
| */ |
| static void |
| handle_events() |
| { |
| struct timeval timo; |
| |
| kill_link = open_ccp_flag = 0; |
| if (sigsetjmp(sigjmp, 1) == 0) { |
| sigprocmask(SIG_BLOCK, &signals_handled, NULL); |
| if (got_sighup || got_sigterm || got_sigusr2 || got_sigchld) { |
| sigprocmask(SIG_UNBLOCK, &signals_handled, NULL); |
| } else { |
| waiting = 1; |
| sigprocmask(SIG_UNBLOCK, &signals_handled, NULL); |
| wait_input(timeleft(&timo)); |
| } |
| } |
| waiting = 0; |
| calltimeout(); |
| if (got_sighup) { |
| info("Hangup (SIGHUP)"); |
| kill_link = 1; |
| got_sighup = 0; |
| if (status != EXIT_HANGUP) |
| status = EXIT_USER_REQUEST; |
| } |
| if (got_sigterm) { |
| info("Terminating on signal %d", got_sigterm); |
| kill_link = 1; |
| asked_to_quit = 1; |
| persist = 0; |
| status = EXIT_USER_REQUEST; |
| got_sigterm = 0; |
| } |
| if (got_sigchld) { |
| got_sigchld = 0; |
| reap_kids(); /* Don't leave dead kids lying around */ |
| } |
| if (got_sigusr2) { |
| open_ccp_flag = 1; |
| got_sigusr2 = 0; |
| } |
| } |
| |
| /* |
| * setup_signals - initialize signal handling. |
| */ |
| static void |
| setup_signals() |
| { |
| struct sigaction sa; |
| |
| /* |
| * Compute mask of all interesting signals and install signal handlers |
| * for each. Only one signal handler may be active at a time. Therefore, |
| * all other signals should be masked when any handler is executing. |
| */ |
| sigemptyset(&signals_handled); |
| sigaddset(&signals_handled, SIGHUP); |
| sigaddset(&signals_handled, SIGINT); |
| sigaddset(&signals_handled, SIGTERM); |
| sigaddset(&signals_handled, SIGCHLD); |
| sigaddset(&signals_handled, SIGUSR2); |
| |
| #define SIGNAL(s, handler) do { \ |
| sa.sa_handler = handler; \ |
| if (sigaction(s, &sa, NULL) < 0) \ |
| fatal("Couldn't establish signal handler (%d): %m", s); \ |
| } while (0) |
| |
| sa.sa_mask = signals_handled; |
| sa.sa_flags = 0; |
| SIGNAL(SIGHUP, hup); /* Hangup */ |
| SIGNAL(SIGINT, term); /* Interrupt */ |
| SIGNAL(SIGTERM, term); /* Terminate */ |
| SIGNAL(SIGCHLD, chld); |
| |
| SIGNAL(SIGUSR1, toggle_debug); /* Toggle debug flag */ |
| SIGNAL(SIGUSR2, open_ccp); /* Reopen CCP */ |
| |
| /* |
| * Install a handler for other signals which would otherwise |
| * cause pppd to exit without cleaning up. |
| */ |
| SIGNAL(SIGABRT, bad_signal); |
| SIGNAL(SIGALRM, bad_signal); |
| SIGNAL(SIGFPE, bad_signal); |
| SIGNAL(SIGILL, bad_signal); |
| SIGNAL(SIGPIPE, bad_signal); |
| SIGNAL(SIGQUIT, bad_signal); |
| SIGNAL(SIGSEGV, bad_signal); |
| #ifdef SIGBUS |
| SIGNAL(SIGBUS, bad_signal); |
| #endif |
| #ifdef SIGEMT |
| SIGNAL(SIGEMT, bad_signal); |
| #endif |
| #ifdef SIGPOLL |
| SIGNAL(SIGPOLL, bad_signal); |
| #endif |
| #ifdef SIGPROF |
| SIGNAL(SIGPROF, bad_signal); |
| #endif |
| #ifdef SIGSYS |
| SIGNAL(SIGSYS, bad_signal); |
| #endif |
| #ifdef SIGTRAP |
| SIGNAL(SIGTRAP, bad_signal); |
| #endif |
| #ifdef SIGVTALRM |
| SIGNAL(SIGVTALRM, bad_signal); |
| #endif |
| #ifdef SIGXCPU |
| SIGNAL(SIGXCPU, bad_signal); |
| #endif |
| #ifdef SIGXFSZ |
| SIGNAL(SIGXFSZ, bad_signal); |
| #endif |
| |
| /* |
| * Apparently we can get a SIGPIPE when we call syslog, if |
| * syslogd has died and been restarted. Ignoring it seems |
| * be sufficient. |
| */ |
| signal(SIGPIPE, SIG_IGN); |
| } |
| |
| /* |
| * set_ifunit - do things we need to do once we know which ppp |
| * unit we are using. |
| */ |
| void |
| set_ifunit(iskey) |
| int iskey; |
| { |
| info("Using interface %s%d", PPP_DRV_NAME, ifunit); |
| slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit); |
| script_setenv("IFNAME", ifname, iskey); |
| if (iskey) { |
| create_pidfile(getpid()); /* write pid to file */ |
| create_linkpidfile(getpid()); |
| } |
| } |
| |
| /* |
| * detach - detach us from the controlling terminal. |
| */ |
| void |
| detach() |
| { |
| int pid; |
| char numbuf[16]; |
| int pipefd[2]; |
| |
| if (detached) |
| return; |
| if (pipe(pipefd) == -1) |
| pipefd[0] = pipefd[1] = -1; |
| if ((pid = fork()) < 0) { |
| error("Couldn't detach (fork failed: %m)"); |
| die(1); /* or just return? */ |
| } |
| if (pid != 0) { |
| /* parent */ |
| notify(pidchange, pid); |
| /* update pid files if they have been written already */ |
| if (pidfilename[0]) |
| create_pidfile(pid); |
| if (linkpidfile[0]) |
| create_linkpidfile(pid); |
| exit(0); /* parent dies */ |
| } |
| setsid(); |
| chdir("/"); |
| dup2(fd_devnull, 0); |
| dup2(fd_devnull, 1); |
| dup2(fd_devnull, 2); |
| detached = 1; |
| if (log_default) |
| log_to_fd = -1; |
| slprintf(numbuf, sizeof(numbuf), "%d", getpid()); |
| script_setenv("PPPD_PID", numbuf, 1); |
| |
| /* wait for parent to finish updating pid & lock files and die */ |
| close(pipefd[1]); |
| complete_read(pipefd[0], numbuf, 1); |
| close(pipefd[0]); |
| } |
| |
| /* |
| * reopen_log - (re)open our connection to syslog. |
| */ |
| void |
| reopen_log() |
| { |
| #ifndef ANDROID_CHANGES |
| openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP); |
| setlogmask(LOG_UPTO(LOG_INFO)); |
| #endif |
| } |
| |
| /* |
| * Create a file containing our process ID. |
| */ |
| static void |
| create_pidfile(pid) |
| int pid; |
| { |
| #ifndef ANDROID_CHANGES |
| FILE *pidfile; |
| |
| slprintf(pidfilename, sizeof(pidfilename), "%s%s.pid", |
| _PATH_VARRUN, ifname); |
| if ((pidfile = fopen(pidfilename, "w")) != NULL) { |
| fprintf(pidfile, "%d\n", pid); |
| (void) fclose(pidfile); |
| } else { |
| error("Failed to create pid file %s: %m", pidfilename); |
| pidfilename[0] = 0; |
| } |
| #endif |
| } |
| |
| void |
| create_linkpidfile(pid) |
| int pid; |
| { |
| #ifndef ANDROID_CHANGES |
| FILE *pidfile; |
| |
| if (linkname[0] == 0) |
| return; |
| script_setenv("LINKNAME", linkname, 1); |
| slprintf(linkpidfile, sizeof(linkpidfile), "%sppp-%s.pid", |
| _PATH_VARRUN, linkname); |
| if ((pidfile = fopen(linkpidfile, "w")) != NULL) { |
| fprintf(pidfile, "%d\n", pid); |
| if (ifname[0]) |
| fprintf(pidfile, "%s\n", ifname); |
| (void) fclose(pidfile); |
| } else { |
| error("Failed to create pid file %s: %m", linkpidfile); |
| linkpidfile[0] = 0; |
| } |
| #endif |
| } |
| |
| /* |
| * remove_pidfile - remove our pid files |
| */ |
| void remove_pidfiles() |
| { |
| #ifndef ANDROID_CHANGES |
| if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT) |
| warn("unable to delete pid file %s: %m", pidfilename); |
| pidfilename[0] = 0; |
| if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT) |
| warn("unable to delete pid file %s: %m", linkpidfile); |
| linkpidfile[0] = 0; |
| #endif |
| } |
| |
| /* |
| * holdoff_end - called via a timeout when the holdoff period ends. |
| */ |
| static void |
| holdoff_end(arg) |
| void *arg; |
| { |
| new_phase(PHASE_DORMANT); |
| } |
| |
| /* List of protocol names, to make our messages a little more informative. */ |
| struct protocol_list { |
| u_short proto; |
| const char *name; |
| } protocol_list[] = { |
| { 0x21, "IP" }, |
| { 0x23, "OSI Network Layer" }, |
| { 0x25, "Xerox NS IDP" }, |
| { 0x27, "DECnet Phase IV" }, |
| { 0x29, "Appletalk" }, |
| { 0x2b, "Novell IPX" }, |
| { 0x2d, "VJ compressed TCP/IP" }, |
| { 0x2f, "VJ uncompressed TCP/IP" }, |
| { 0x31, "Bridging PDU" }, |
| { 0x33, "Stream Protocol ST-II" }, |
| { 0x35, "Banyan Vines" }, |
| { 0x39, "AppleTalk EDDP" }, |
| { 0x3b, "AppleTalk SmartBuffered" }, |
| { 0x3d, "Multi-Link" }, |
| { 0x3f, "NETBIOS Framing" }, |
| { 0x41, "Cisco Systems" }, |
| { 0x43, "Ascom Timeplex" }, |
| { 0x45, "Fujitsu Link Backup and Load Balancing (LBLB)" }, |
| { 0x47, "DCA Remote Lan" }, |
| { 0x49, "Serial Data Transport Protocol (PPP-SDTP)" }, |
| { 0x4b, "SNA over 802.2" }, |
| { 0x4d, "SNA" }, |
| { 0x4f, "IP6 Header Compression" }, |
| { 0x6f, "Stampede Bridging" }, |
| { 0xfb, "single-link compression" }, |
| { 0xfd, "1st choice compression" }, |
| { 0x0201, "802.1d Hello Packets" }, |
| { 0x0203, "IBM Source Routing BPDU" }, |
| { 0x0205, "DEC LANBridge100 Spanning Tree" }, |
| { 0x0231, "Luxcom" }, |
| { 0x0233, "Sigma Network Systems" }, |
| { 0x8021, "Internet Protocol Control Protocol" }, |
| { 0x8023, "OSI Network Layer Control Protocol" }, |
| { 0x8025, "Xerox NS IDP Control Protocol" }, |
| { 0x8027, "DECnet Phase IV Control Protocol" }, |
| { 0x8029, "Appletalk Control Protocol" }, |
| { 0x802b, "Novell IPX Control Protocol" }, |
| { 0x8031, "Bridging NCP" }, |
| { 0x8033, "Stream Protocol Control Protocol" }, |
| { 0x8035, "Banyan Vines Control Protocol" }, |
| { 0x803d, "Multi-Link Control Protocol" }, |
| { 0x803f, "NETBIOS Framing Control Protocol" }, |
| { 0x8041, "Cisco Systems Control Protocol" }, |
| { 0x8043, "Ascom Timeplex" }, |
| { 0x8045, "Fujitsu LBLB Control Protocol" }, |
| { 0x8047, "DCA Remote Lan Network Control Protocol (RLNCP)" }, |
| { 0x8049, "Serial Data Control Protocol (PPP-SDCP)" }, |
| { 0x804b, "SNA over 802.2 Control Protocol" }, |
| { 0x804d, "SNA Control Protocol" }, |
| { 0x804f, "IP6 Header Compression Control Protocol" }, |
| { 0x006f, "Stampede Bridging Control Protocol" }, |
| { 0x80fb, "Single Link Compression Control Protocol" }, |
| { 0x80fd, "Compression Control Protocol" }, |
| { 0xc021, "Link Control Protocol" }, |
| { 0xc023, "Password Authentication Protocol" }, |
| { 0xc025, "Link Quality Report" }, |
| { 0xc027, "Shiva Password Authentication Protocol" }, |
| { 0xc029, "CallBack Control Protocol (CBCP)" }, |
| { 0xc081, "Container Control Protocol" }, |
| { 0xc223, "Challenge Handshake Authentication Protocol" }, |
| { 0xc281, "Proprietary Authentication Protocol" }, |
| { 0, NULL }, |
| }; |
| |
| /* |
| * protocol_name - find a name for a PPP protocol. |
| */ |
| const char * |
| protocol_name(proto) |
| int proto; |
| { |
| struct protocol_list *lp; |
| |
| for (lp = protocol_list; lp->proto != 0; ++lp) |
| if (proto == lp->proto) |
| return lp->name; |
| return NULL; |
| } |
| |
| /* |
| * get_input - called when incoming data is available. |
| */ |
| static void |
| get_input() |
| { |
| int len, i; |
| u_char *p; |
| u_short protocol; |
| struct protent *protp; |
| |
| p = inpacket_buf; /* point to beginning of packet buffer */ |
| |
| len = read_packet(inpacket_buf); |
| if (len < 0) |
| return; |
| |
| if (len == 0) { |
| if (bundle_eof && multilink_master) { |
| notice("Last channel has disconnected"); |
| mp_bundle_terminated(); |
| return; |
| } |
| notice("Modem hangup"); |
| hungup = 1; |
| status = EXIT_HANGUP; |
| lcp_lowerdown(0); /* serial link is no longer available */ |
| link_terminated(0); |
| return; |
| } |
| |
| if (len < PPP_HDRLEN) { |
| dbglog("received short packet:%.*B", len, p); |
| return; |
| } |
| |
| dump_packet("rcvd", p, len); |
| if (snoop_recv_hook) snoop_recv_hook(p, len); |
| |
| p += 2; /* Skip address and control */ |
| GETSHORT(protocol, p); |
| len -= PPP_HDRLEN; |
| |
| /* |
| * Toss all non-LCP packets unless LCP is OPEN. |
| */ |
| if (protocol != PPP_LCP && lcp_fsm[0].state != OPENED) { |
| dbglog("Discarded non-LCP packet when LCP not open"); |
| return; |
| } |
| |
| /* |
| * Until we get past the authentication phase, toss all packets |
| * except LCP, LQR and authentication packets. |
| */ |
| if (phase <= PHASE_AUTHENTICATE |
| && !(protocol == PPP_LCP || protocol == PPP_LQR |
| || protocol == PPP_PAP || protocol == PPP_CHAP || |
| protocol == PPP_EAP)) { |
| dbglog("discarding proto 0x%x in phase %d", |
| protocol, phase); |
| return; |
| } |
| |
| /* |
| * Upcall the proper protocol input routine. |
| */ |
| for (i = 0; (protp = protocols[i]) != NULL; ++i) { |
| if (protp->protocol == protocol && protp->enabled_flag) { |
| (*protp->input)(0, p, len); |
| return; |
| } |
| if (protocol == (protp->protocol & ~0x8000) && protp->enabled_flag |
| && protp->datainput != NULL) { |
| (*protp->datainput)(0, p, len); |
| return; |
| } |
| } |
| |
| if (debug) { |
| const char *pname = protocol_name(protocol); |
| if (pname != NULL) |
| warn("Unsupported protocol '%s' (0x%x) received", pname, protocol); |
| else |
| warn("Unsupported protocol 0x%x received", protocol); |
| } |
| lcp_sprotrej(0, p - PPP_HDRLEN, len + PPP_HDRLEN); |
| } |
| |
| /* |
| * ppp_send_config - configure the transmit-side characteristics of |
| * the ppp interface. Returns -1, indicating an error, if the channel |
| * send_config procedure called error() (or incremented error_count |
| * itself), otherwise 0. |
| */ |
| int |
| ppp_send_config(unit, mtu, accm, pcomp, accomp) |
| int unit, mtu; |
| u_int32_t accm; |
| int pcomp, accomp; |
| { |
| int errs; |
| |
| if (the_channel->send_config == NULL) |
| return 0; |
| errs = error_count; |
| (*the_channel->send_config)(mtu, accm, pcomp, accomp); |
| return (error_count != errs)? -1: 0; |
| } |
| |
| /* |
| * ppp_recv_config - configure the receive-side characteristics of |
| * the ppp interface. Returns -1, indicating an error, if the channel |
| * recv_config procedure called error() (or incremented error_count |
| * itself), otherwise 0. |
| */ |
| int |
| ppp_recv_config(unit, mru, accm, pcomp, accomp) |
| int unit, mru; |
| u_int32_t accm; |
| int pcomp, accomp; |
| { |
| int errs; |
| |
| if (the_channel->recv_config == NULL) |
| return 0; |
| errs = error_count; |
| (*the_channel->recv_config)(mru, accm, pcomp, accomp); |
| return (error_count != errs)? -1: 0; |
| } |
| |
| /* |
| * new_phase - signal the start of a new phase of pppd's operation. |
| */ |
| void |
| new_phase(p) |
| int p; |
| { |
| phase = p; |
| if (new_phase_hook) |
| (*new_phase_hook)(p); |
| notify(phasechange, p); |
| } |
| |
| /* |
| * die - clean up state and exit with the specified status. |
| */ |
| void |
| die(status) |
| int status; |
| { |
| if (!doing_multilink || multilink_master) |
| print_link_stats(); |
| cleanup(); |
| notify(exitnotify, status); |
| syslog(LOG_INFO, "Exit."); |
| exit(status); |
| } |
| |
| /* |
| * cleanup - restore anything which needs to be restored before we exit |
| */ |
| /* ARGSUSED */ |
| static void |
| cleanup() |
| { |
| sys_cleanup(); |
| |
| if (fd_ppp >= 0) |
| the_channel->disestablish_ppp(devfd); |
| if (the_channel->cleanup) |
| (*the_channel->cleanup)(); |
| remove_pidfiles(); |
| |
| #ifdef USE_TDB |
| if (pppdb != NULL) |
| cleanup_db(); |
| #endif |
| |
| } |
| |
| void |
| print_link_stats() |
| { |
| /* |
| * Print connect time and statistics. |
| */ |
| if (link_stats_valid) { |
| int t = (link_connect_time + 5) / 6; /* 1/10ths of minutes */ |
| info("Connect time %d.%d minutes.", t/10, t%10); |
| info("Sent %u bytes, received %u bytes.", |
| link_stats.bytes_out, link_stats.bytes_in); |
| link_stats_valid = 0; |
| } |
| } |
| |
| /* |
| * reset_link_stats - "reset" stats when link goes up. |
| */ |
| void |
| reset_link_stats(u) |
| int u; |
| { |
| if (!get_ppp_stats(u, &old_link_stats)) |
| return; |
| gettimeofday(&start_time, NULL); |
| } |
| |
| /* |
| * update_link_stats - get stats at link termination. |
| */ |
| void |
| update_link_stats(u) |
| int u; |
| { |
| struct timeval now; |
| char numbuf[32]; |
| |
| if (!get_ppp_stats(u, &link_stats) |
| || gettimeofday(&now, NULL) < 0) |
| return; |
| link_connect_time = now.tv_sec - start_time.tv_sec; |
| link_stats_valid = 1; |
| |
| link_stats.bytes_in -= old_link_stats.bytes_in; |
| link_stats.bytes_out -= old_link_stats.bytes_out; |
| link_stats.pkts_in -= old_link_stats.pkts_in; |
| link_stats.pkts_out -= old_link_stats.pkts_out; |
| |
| slprintf(numbuf, sizeof(numbuf), "%u", link_connect_time); |
| script_setenv("CONNECT_TIME", numbuf, 0); |
| slprintf(numbuf, sizeof(numbuf), "%u", link_stats.bytes_out); |
| script_setenv("BYTES_SENT", numbuf, 0); |
| slprintf(numbuf, sizeof(numbuf), "%u", link_stats.bytes_in); |
| script_setenv("BYTES_RCVD", numbuf, 0); |
| } |
| |
| |
| struct callout { |
| struct timeval c_time; /* time at which to call routine */ |
| void *c_arg; /* argument to routine */ |
| void (*c_func) __P((void *)); /* routine */ |
| struct callout *c_next; |
| }; |
| |
| static struct callout *callout = NULL; /* Callout list */ |
| static struct timeval timenow; /* Current time */ |
| |
| /* |
| * timeout - Schedule a timeout. |
| */ |
| void |
| timeout(func, arg, secs, usecs) |
| void (*func) __P((void *)); |
| void *arg; |
| int secs, usecs; |
| { |
| struct callout *newp, *p, **pp; |
| |
| /* |
| * Allocate timeout. |
| */ |
| if ((newp = (struct callout *) malloc(sizeof(struct callout))) == NULL) |
| fatal("Out of memory in timeout()!"); |
| newp->c_arg = arg; |
| newp->c_func = func; |
| gettimeofday(&timenow, NULL); |
| newp->c_time.tv_sec = timenow.tv_sec + secs; |
| newp->c_time.tv_usec = timenow.tv_usec + usecs; |
| if (newp->c_time.tv_usec >= 1000000) { |
| newp->c_time.tv_sec += newp->c_time.tv_usec / 1000000; |
| newp->c_time.tv_usec %= 1000000; |
| } |
| |
| /* |
| * Find correct place and link it in. |
| */ |
| for (pp = &callout; (p = *pp); pp = &p->c_next) |
| if (newp->c_time.tv_sec < p->c_time.tv_sec |
| || (newp->c_time.tv_sec == p->c_time.tv_sec |
| && newp->c_time.tv_usec < p->c_time.tv_usec)) |
| break; |
| newp->c_next = p; |
| *pp = newp; |
| } |
| |
| |
| /* |
| * untimeout - Unschedule a timeout. |
| */ |
| void |
| untimeout(func, arg) |
| void (*func) __P((void *)); |
| void *arg; |
| { |
| struct callout **copp, *freep; |
| |
| /* |
| * Find first matching timeout and remove it from the list. |
| */ |
| for (copp = &callout; (freep = *copp); copp = &freep->c_next) |
| if (freep->c_func == func && freep->c_arg == arg) { |
| *copp = freep->c_next; |
| free((char *) freep); |
| break; |
| } |
| } |
| |
| |
| /* |
| * calltimeout - Call any timeout routines which are now due. |
| */ |
| static void |
| calltimeout() |
| { |
| struct callout *p; |
| |
| while (callout != NULL) { |
| p = callout; |
| |
| if (gettimeofday(&timenow, NULL) < 0) |
| fatal("Failed to get time of day: %m"); |
| if (!(p->c_time.tv_sec < timenow.tv_sec |
| || (p->c_time.tv_sec == timenow.tv_sec |
| && p->c_time.tv_usec <= timenow.tv_usec))) |
| break; /* no, it's not time yet */ |
| |
| callout = p->c_next; |
| (*p->c_func)(p->c_arg); |
| |
| free((char *) p); |
| } |
| } |
| |
| |
| /* |
| * timeleft - return the length of time until the next timeout is due. |
| */ |
| static struct timeval * |
| timeleft(tvp) |
| struct timeval *tvp; |
| { |
| if (callout == NULL) |
| return NULL; |
| |
| gettimeofday(&timenow, NULL); |
| tvp->tv_sec = callout->c_time.tv_sec - timenow.tv_sec; |
| tvp->tv_usec = callout->c_time.tv_usec - timenow.tv_usec; |
| if (tvp->tv_usec < 0) { |
| tvp->tv_usec += 1000000; |
| tvp->tv_sec -= 1; |
| } |
| if (tvp->tv_sec < 0) |
| tvp->tv_sec = tvp->tv_usec = 0; |
| |
| return tvp; |
| } |
| |
| |
| /* |
| * kill_my_pg - send a signal to our process group, and ignore it ourselves. |
| * We assume that sig is currently blocked. |
| */ |
| static void |
| kill_my_pg(sig) |
| int sig; |
| { |
| struct sigaction act, oldact; |
| |
| sigemptyset(&act.sa_mask); /* unnecessary in fact */ |
| act.sa_handler = SIG_IGN; |
| act.sa_flags = 0; |
| kill(0, sig); |
| /* |
| * The kill() above made the signal pending for us, as well as |
| * the rest of our process group, but we don't want it delivered |
| * to us. It is blocked at the moment. Setting it to be ignored |
| * will cause the pending signal to be discarded. If we did the |
| * kill() after setting the signal to be ignored, it is unspecified |
| * (by POSIX) whether the signal is immediately discarded or left |
| * pending, and in fact Linux would leave it pending, and so it |
| * would be delivered after the current signal handler exits, |
| * leading to an infinite loop. |
| */ |
| sigaction(sig, &act, &oldact); |
| sigaction(sig, &oldact, NULL); |
| } |
| |
| |
| /* |
| * hup - Catch SIGHUP signal. |
| * |
| * Indicates that the physical layer has been disconnected. |
| * We don't rely on this indication; if the user has sent this |
| * signal, we just take the link down. |
| */ |
| static void |
| hup(sig) |
| int sig; |
| { |
| /* can't log a message here, it can deadlock */ |
| got_sighup = 1; |
| if (conn_running) |
| /* Send the signal to the [dis]connector process(es) also */ |
| kill_my_pg(sig); |
| notify(sigreceived, sig); |
| if (waiting) |
| siglongjmp(sigjmp, 1); |
| } |
| |
| |
| /* |
| * term - Catch SIGTERM signal and SIGINT signal (^C/del). |
| * |
| * Indicates that we should initiate a graceful disconnect and exit. |
| */ |
| /*ARGSUSED*/ |
| static void |
| term(sig) |
| int sig; |
| { |
| /* can't log a message here, it can deadlock */ |
| got_sigterm = sig; |
| if (conn_running) |
| /* Send the signal to the [dis]connector process(es) also */ |
| kill_my_pg(sig); |
| notify(sigreceived, sig); |
| if (waiting) |
| siglongjmp(sigjmp, 1); |
| } |
| |
| |
| /* |
| * chld - Catch SIGCHLD signal. |
| * Sets a flag so we will call reap_kids in the mainline. |
| */ |
| static void |
| chld(sig) |
| int sig; |
| { |
| got_sigchld = 1; |
| if (waiting) |
| siglongjmp(sigjmp, 1); |
| } |
| |
| |
| /* |
| * toggle_debug - Catch SIGUSR1 signal. |
| * |
| * Toggle debug flag. |
| */ |
| /*ARGSUSED*/ |
| static void |
| toggle_debug(sig) |
| int sig; |
| { |
| debug = !debug; |
| if (debug) { |
| setlogmask(LOG_UPTO(LOG_DEBUG)); |
| } else { |
| setlogmask(LOG_UPTO(LOG_WARNING)); |
| } |
| } |
| |
| |
| /* |
| * open_ccp - Catch SIGUSR2 signal. |
| * |
| * Try to (re)negotiate compression. |
| */ |
| /*ARGSUSED*/ |
| static void |
| open_ccp(sig) |
| int sig; |
| { |
| got_sigusr2 = 1; |
| if (waiting) |
| siglongjmp(sigjmp, 1); |
| } |
| |
| |
| /* |
| * bad_signal - We've caught a fatal signal. Clean up state and exit. |
| */ |
| static void |
| bad_signal(sig) |
| int sig; |
| { |
| static int crashed = 0; |
| |
| if (crashed) |
| _exit(127); |
| crashed = 1; |
| error("Fatal signal %d", sig); |
| if (conn_running) |
| kill_my_pg(SIGTERM); |
| notify(sigreceived, sig); |
| die(127); |
| } |
| |
| /* |
| * safe_fork - Create a child process. The child closes all the |
| * file descriptors that we don't want to leak to a script. |
| * The parent waits for the child to do this before returning. |
| * This also arranges for the specified fds to be dup'd to |
| * fds 0, 1, 2 in the child. |
| */ |
| pid_t |
| safe_fork(int infd, int outfd, int errfd) |
| { |
| pid_t pid; |
| int fd, pipefd[2]; |
| char buf[1]; |
| |
| /* make sure fds 0, 1, 2 are occupied (probably not necessary) */ |
| while ((fd = dup(fd_devnull)) >= 0) { |
| if (fd > 2) { |
| close(fd); |
| break; |
| } |
| } |
| |
| if (pipe(pipefd) == -1) |
| pipefd[0] = pipefd[1] = -1; |
| pid = fork(); |
| if (pid < 0) { |
| error("fork failed: %m"); |
| return -1; |
| } |
| if (pid > 0) { |
| /* parent */ |
| close(pipefd[1]); |
| /* this read() blocks until the close(pipefd[1]) below */ |
| complete_read(pipefd[0], buf, 1); |
| close(pipefd[0]); |
| return pid; |
| } |
| |
| /* Executing in the child */ |
| sys_close(); |
| #ifdef USE_TDB |
| tdb_close(pppdb); |
| #endif |
| |
| /* make sure infd, outfd and errfd won't get tromped on below */ |
| if (infd == 1 || infd == 2) |
| infd = dup(infd); |
| if (outfd == 0 || outfd == 2) |
| outfd = dup(outfd); |
| if (errfd == 0 || errfd == 1) |
| errfd = dup(errfd); |
| |
| /* dup the in, out, err fds to 0, 1, 2 */ |
| if (infd != 0) |
| dup2(infd, 0); |
| if (outfd != 1) |
| dup2(outfd, 1); |
| if (errfd != 2) |
| dup2(errfd, 2); |
| |
| #ifndef ANDROID_CHANGES |
| closelog(); |
| #endif |
| if (log_to_fd > 2) |
| close(log_to_fd); |
| if (the_channel->close) |
| (*the_channel->close)(); |
| else |
| close(devfd); /* some plugins don't have a close function */ |
| close(fd_ppp); |
| close(fd_devnull); |
| if (infd != 0) |
| close(infd); |
| if (outfd != 1) |
| close(outfd); |
| if (errfd != 2) |
| close(errfd); |
| |
| notify(fork_notifier, 0); |
| close(pipefd[0]); |
| /* this close unblocks the read() call above in the parent */ |
| close(pipefd[1]); |
| |
| return 0; |
| } |
| |
| /* |
| * device_script - run a program to talk to the specified fds |
| * (e.g. to run the connector or disconnector script). |
| * stderr gets connected to the log fd or to the _PATH_CONNERRS file. |
| */ |
| int |
| device_script(program, in, out, dont_wait) |
| char *program; |
| int in, out; |
| int dont_wait; |
| { |
| int pid; |
| int status = -1; |
| int errfd; |
| |
| if (log_to_fd >= 0) |
| errfd = log_to_fd; |
| else |
| errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0600); |
| |
| ++conn_running; |
| pid = safe_fork(in, out, errfd); |
| |
| if (pid != 0 && log_to_fd < 0) |
| close(errfd); |
| |
| if (pid < 0) { |
| --conn_running; |
| error("Failed to create child process: %m"); |
| return -1; |
| } |
| |
| if (pid != 0) { |
| if (dont_wait) { |
| record_child(pid, program, NULL, NULL); |
| status = 0; |
| } else { |
| while (waitpid(pid, &status, 0) < 0) { |
| if (errno == EINTR) |
| continue; |
| fatal("error waiting for (dis)connection process: %m"); |
| } |
| --conn_running; |
| } |
| return (status == 0 ? 0 : -1); |
| } |
| |
| /* here we are executing in the child */ |
| |
| setgid(getgid()); |
| setuid(uid); |
| if (getuid() != uid) { |
| fprintf(stderr, "pppd: setuid failed\n"); |
| exit(1); |
| } |
| execl("/system/bin/sh", "sh", "-c", program, NULL); |
| perror("pppd: could not exec /bin/sh"); |
| exit(99); |
| /* NOTREACHED */ |
| } |
| |
| |
| /* |
| * run-program - execute a program with given arguments, |
| * but don't wait for it. |
| * If the program can't be executed, logs an error unless |
| * must_exist is 0 and the program file doesn't exist. |
| * Returns -1 if it couldn't fork, 0 if the file doesn't exist |
| * or isn't an executable plain file, or the process ID of the child. |
| * If done != NULL, (*done)(arg) will be called later (within |
| * reap_kids) iff the return value is > 0. |
| */ |
| pid_t |
| run_program(prog, args, must_exist, done, arg) |
| char *prog; |
| char **args; |
| int must_exist; |
| void (*done) __P((void *)); |
| void *arg; |
| { |
| int pid; |
| struct stat sbuf; |
| |
| #ifdef ANDROID_CHANGES |
| /* Originally linkname is used to create named pid files, which is |
| * meaningless to android. Here we use it as a suffix of program names, |
| * so different users can run their own program by specifying it. For |
| * example, "/etc/ppp/ip-up-vpn" will be executed when IPCP is up and |
| * linkname is "vpn". Note that "/" is not allowed for security reasons. */ |
| char file[MAXPATHLEN]; |
| |
| if (linkname[0] && !strchr(linkname, '/')) { |
| snprintf(file, MAXPATHLEN, "%s-%s", prog, linkname); |
| file[MAXPATHLEN - 1] = '\0'; |
| prog = file; |
| } |
| #endif |
| |
| /* |
| * First check if the file exists and is executable. |
| * We don't use access() because that would use the |
| * real user-id, which might not be root, and the script |
| * might be accessible only to root. |
| */ |
| errno = EINVAL; |
| if (stat(prog, &sbuf) < 0 || !S_ISREG(sbuf.st_mode) |
| || (sbuf.st_mode & (S_IXUSR|S_IXGRP|S_IXOTH)) == 0) { |
| if (must_exist || errno != ENOENT) |
| warn("Can't execute %s: %m", prog); |
| return 0; |
| } |
| |
| pid = safe_fork(fd_devnull, fd_devnull, fd_devnull); |
| if (pid == -1) { |
| error("Failed to create child process for %s: %m", prog); |
| return -1; |
| } |
| if (pid != 0) { |
| if (debug) |
| dbglog("Script %s started (pid %d)", prog, pid); |
| record_child(pid, prog, done, arg); |
| return pid; |
| } |
| |
| /* Leave the current location */ |
| (void) setsid(); /* No controlling tty. */ |
| (void) umask (S_IRWXG|S_IRWXO); |
| (void) chdir ("/"); /* no current directory. */ |
| setuid(0); /* set real UID = root */ |
| setgid(getegid()); |
| |
| #ifdef BSD |
| /* Force the priority back to zero if pppd is running higher. */ |
| if (setpriority (PRIO_PROCESS, 0, 0) < 0) |
| warn("can't reset priority to 0: %m"); |
| #endif |
| |
| /* run the program */ |
| execve(prog, args, script_env); |
| if (must_exist || errno != ENOENT) { |
| #ifndef ANDROID_CHANGES |
| /* have to reopen the log, there's nowhere else |
| for the message to go. */ |
| reopen_log(); |
| syslog(LOG_ERR, "Can't execute %s: %m", prog); |
| closelog(); |
| #else |
| error("Can't execute %s: %m", prog); |
| #endif |
| } |
| _exit(-1); |
| } |
| |
| |
| /* |
| * record_child - add a child process to the list for reap_kids |
| * to use. |
| */ |
| void |
| record_child(pid, prog, done, arg) |
| int pid; |
| char *prog; |
| void (*done) __P((void *)); |
| void *arg; |
| { |
| struct subprocess *chp; |
| |
| ++n_children; |
| |
| chp = (struct subprocess *) malloc(sizeof(struct subprocess)); |
| if (chp == NULL) { |
| warn("losing track of %s process", prog); |
| } else { |
| chp->pid = pid; |
| chp->prog = prog; |
| chp->done = done; |
| chp->arg = arg; |
| chp->next = children; |
| children = chp; |
| } |
| } |
| |
| /* |
| * childwait_end - we got fed up waiting for the child processes to |
| * exit, send them all a SIGTERM. |
| */ |
| static void |
| childwait_end(arg) |
| void *arg; |
| { |
| struct subprocess *chp; |
| |
| for (chp = children; chp != NULL; chp = chp->next) { |
| if (debug) |
| dbglog("sending SIGTERM to process %d", chp->pid); |
| kill(chp->pid, SIGTERM); |
| } |
| childwait_done = 1; |
| } |
| |
| /* |
| * reap_kids - get status from any dead child processes, |
| * and log a message for abnormal terminations. |
| */ |
| static int |
| reap_kids() |
| { |
| int pid, status; |
| struct subprocess *chp, **prevp; |
| |
| if (n_children == 0) |
| return 0; |
| while ((pid = waitpid(-1, &status, WNOHANG)) != -1 && pid != 0) { |
| for (prevp = &children; (chp = *prevp) != NULL; prevp = &chp->next) { |
| if (chp->pid == pid) { |
| --n_children; |
| *prevp = chp->next; |
| break; |
| } |
| } |
| if (WIFSIGNALED(status)) { |
| warn("Child process %s (pid %d) terminated with signal %d", |
| (chp? chp->prog: "??"), pid, WTERMSIG(status)); |
| } else if (debug) |
| dbglog("Script %s finished (pid %d), status = 0x%x", |
| (chp? chp->prog: "??"), pid, |
| WIFEXITED(status) ? WEXITSTATUS(status) : status); |
| if (chp && chp->done) |
| (*chp->done)(chp->arg); |
| if (chp) |
| free(chp); |
| } |
| if (pid == -1) { |
| if (errno == ECHILD) |
| return -1; |
| if (errno != EINTR) |
| error("Error waiting for child process: %m"); |
| } |
| return 0; |
| } |
| |
| /* |
| * add_notifier - add a new function to be called when something happens. |
| */ |
| void |
| add_notifier(notif, func, arg) |
| struct notifier **notif; |
| notify_func func; |
| void *arg; |
| { |
| struct notifier *np; |
| |
| np = malloc(sizeof(struct notifier)); |
| if (np == 0) |
| novm("notifier struct"); |
| np->next = *notif; |
| np->func = func; |
| np->arg = arg; |
| *notif = np; |
| } |
| |
| /* |
| * remove_notifier - remove a function from the list of things to |
| * be called when something happens. |
| */ |
| void |
| remove_notifier(notif, func, arg) |
| struct notifier **notif; |
| notify_func func; |
| void *arg; |
| { |
| struct notifier *np; |
| |
| for (; (np = *notif) != 0; notif = &np->next) { |
| if (np->func == func && np->arg == arg) { |
| *notif = np->next; |
| free(np); |
| break; |
| } |
| } |
| } |
| |
| /* |
| * notify - call a set of functions registered with add_notifier. |
| */ |
| void |
| notify(notif, val) |
| struct notifier *notif; |
| int val; |
| { |
| struct notifier *np; |
| |
| while ((np = notif) != 0) { |
| notif = np->next; |
| (*np->func)(np->arg, val); |
| } |
| } |
| |
| /* |
| * novm - log an error message saying we ran out of memory, and die. |
| */ |
| void |
| novm(msg) |
| char *msg; |
| { |
| fatal("Virtual memory exhausted allocating %s\n", msg); |
| } |
| |
| /* |
| * script_setenv - set an environment variable value to be used |
| * for scripts that we run (e.g. ip-up, auth-up, etc.) |
| */ |
| void |
| script_setenv(var, value, iskey) |
| char *var, *value; |
| int iskey; |
| { |
| size_t varl = strlen(var); |
| size_t vl = varl + strlen(value) + 2; |
| int i; |
| char *p, *newstring; |
| |
| newstring = (char *) malloc(vl+1); |
| if (newstring == 0) |
| return; |
| *newstring++ = iskey; |
| slprintf(newstring, vl, "%s=%s", var, value); |
| |
| /* check if this variable is already set */ |
| if (script_env != 0) { |
| for (i = 0; (p = script_env[i]) != 0; ++i) { |
| if (strncmp(p, var, varl) == 0 && p[varl] == '=') { |
| #ifdef USE_TDB |
| if (p[-1] && pppdb != NULL) |
| delete_db_key(p); |
| #endif |
| free(p-1); |
| script_env[i] = newstring; |
| #ifdef USE_TDB |
| if (iskey && pppdb != NULL) |
| add_db_key(newstring); |
| update_db_entry(); |
| #endif |
| return; |
| } |
| } |
| } else { |
| /* no space allocated for script env. ptrs. yet */ |
| i = 0; |
| script_env = (char **) malloc(16 * sizeof(char *)); |
| if (script_env == 0) |
| return; |
| s_env_nalloc = 16; |
| } |
| |
| /* reallocate script_env with more space if needed */ |
| if (i + 1 >= s_env_nalloc) { |
| int new_n = i + 17; |
| char **newenv = (char **) realloc((void *)script_env, |
| new_n * sizeof(char *)); |
| if (newenv == 0) |
| return; |
| script_env = newenv; |
| s_env_nalloc = new_n; |
| } |
| |
| script_env[i] = newstring; |
| script_env[i+1] = 0; |
| |
| #ifdef USE_TDB |
| if (pppdb != NULL) { |
| if (iskey) |
| add_db_key(newstring); |
| update_db_entry(); |
| } |
| #endif |
| } |
| |
| /* |
| * script_unsetenv - remove a variable from the environment |
| * for scripts. |
| */ |
| void |
| script_unsetenv(var) |
| char *var; |
| { |
| int vl = strlen(var); |
| int i; |
| char *p; |
| |
| if (script_env == 0) |
| return; |
| for (i = 0; (p = script_env[i]) != 0; ++i) { |
| if (strncmp(p, var, vl) == 0 && p[vl] == '=') { |
| #ifdef USE_TDB |
| if (p[-1] && pppdb != NULL) |
| delete_db_key(p); |
| #endif |
| free(p-1); |
| while ((script_env[i] = script_env[i+1]) != 0) |
| ++i; |
| break; |
| } |
| } |
| #ifdef USE_TDB |
| if (pppdb != NULL) |
| update_db_entry(); |
| #endif |
| } |
| |
| /* |
| * Any arbitrary string used as a key for locking the database. |
| * It doesn't matter what it is as long as all pppds use the same string. |
| */ |
| #define PPPD_LOCK_KEY "pppd lock" |
| |
| /* |
| * lock_db - get an exclusive lock on the TDB database. |
| * Used to ensure atomicity of various lookup/modify operations. |
| */ |
| void lock_db() |
| { |
| #ifdef USE_TDB |
| TDB_DATA key; |
| |
| key.dptr = PPPD_LOCK_KEY; |
| key.dsize = strlen(key.dptr); |
| tdb_chainlock(pppdb, key); |
| #endif |
| } |
| |
| /* |
| * unlock_db - remove the exclusive lock obtained by lock_db. |
| */ |
| void unlock_db() |
| { |
| #ifdef USE_TDB |
| TDB_DATA key; |
| |
| key.dptr = PPPD_LOCK_KEY; |
| key.dsize = strlen(key.dptr); |
| tdb_chainunlock(pppdb, key); |
| #endif |
| } |
| |
| #ifdef USE_TDB |
| /* |
| * update_db_entry - update our entry in the database. |
| */ |
| static void |
| update_db_entry() |
| { |
| TDB_DATA key, dbuf; |
| int vlen, i; |
| char *p, *q, *vbuf; |
| |
| if (script_env == NULL) |
| return; |
| vlen = 0; |
| for (i = 0; (p = script_env[i]) != 0; ++i) |
| vlen += strlen(p) + 1; |
| vbuf = malloc(vlen + 1); |
| if (vbuf == 0) |
| novm("database entry"); |
| q = vbuf; |
| for (i = 0; (p = script_env[i]) != 0; ++i) |
| q += slprintf(q, vbuf + vlen - q, "%s;", p); |
| |
| key.dptr = db_key; |
| key.dsize = strlen(db_key); |
| dbuf.dptr = vbuf; |
| dbuf.dsize = vlen; |
| if (tdb_store(pppdb, key, dbuf, TDB_REPLACE)) |
| error("tdb_store failed: %s", tdb_error(pppdb)); |
| |
| if (vbuf) |
| free(vbuf); |
| |
| } |
| |
| /* |
| * add_db_key - add a key that we can use to look up our database entry. |
| */ |
| static void |
| add_db_key(str) |
| const char *str; |
| { |
| TDB_DATA key, dbuf; |
| |
| key.dptr = (char *) str; |
| key.dsize = strlen(str); |
| dbuf.dptr = db_key; |
| dbuf.dsize = strlen(db_key); |
| if (tdb_store(pppdb, key, dbuf, TDB_REPLACE)) |
| error("tdb_store key failed: %s", tdb_error(pppdb)); |
| } |
| |
| /* |
| * delete_db_key - delete a key for looking up our database entry. |
| */ |
| static void |
| delete_db_key(str) |
| const char *str; |
| { |
| TDB_DATA key; |
| |
| key.dptr = (char *) str; |
| key.dsize = strlen(str); |
| tdb_delete(pppdb, key); |
| } |
| |
| /* |
| * cleanup_db - delete all the entries we put in the database. |
| */ |
| static void |
| cleanup_db() |
| { |
| TDB_DATA key; |
| int i; |
| char *p; |
| |
| key.dptr = db_key; |
| key.dsize = strlen(db_key); |
| tdb_delete(pppdb, key); |
| for (i = 0; (p = script_env[i]) != 0; ++i) |
| if (p[-1]) |
| delete_db_key(p); |
| } |
| #endif /* USE_TDB */ |