| /* Copyright (C) 2007-2008 The Android Open Source Project |
| ** |
| ** This software is licensed under the terms of the GNU General Public |
| ** License version 2, as published by the Free Software Foundation, and |
| ** may be copied, distributed, and modified under those terms. |
| ** |
| ** This program is distributed in the hope that it will be useful, |
| ** but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ** GNU General Public License for more details. |
| */ |
| #include "qemu_file.h" |
| #include "android/hw-events.h" |
| #include "android/charmap.h" |
| #include "android/globals.h" /* for android_hw */ |
| #include "android/multitouch-screen.h" |
| #include "irq.h" |
| #include "user-events.h" |
| #include "console.h" |
| |
| #define MAX_EVENTS 256*4 |
| |
| enum { |
| REG_READ = 0x00, |
| REG_SET_PAGE = 0x00, |
| REG_LEN = 0x04, |
| REG_DATA = 0x08, |
| |
| PAGE_NAME = 0x00000, |
| PAGE_EVBITS = 0x10000, |
| PAGE_ABSDATA = 0x20000 | EV_ABS, |
| }; |
| |
| /* These corresponds to the state of the driver. |
| * Unfortunately, we have to buffer events coming |
| * from the UI, since the kernel driver is not |
| * capable of receiving them until XXXXXX |
| */ |
| enum { |
| STATE_INIT = 0, /* The device is initialized */ |
| STATE_BUFFERED, /* Events have been buffered, but no IRQ raised yet */ |
| STATE_LIVE /* Events can be sent directly to the kernel */ |
| }; |
| |
| /* NOTE: The ev_bits arrays are used to indicate to the kernel |
| * which events can be sent by the emulated hardware. |
| */ |
| |
| typedef struct |
| { |
| uint32_t base; |
| qemu_irq irq; |
| int pending; |
| int page; |
| |
| unsigned events[MAX_EVENTS]; |
| unsigned first; |
| unsigned last; |
| unsigned state; |
| |
| const char *name; |
| |
| struct { |
| size_t len; |
| uint8_t *bits; |
| } ev_bits[EV_MAX + 1]; |
| |
| int32_t *abs_info; |
| size_t abs_info_count; |
| } events_state; |
| |
| /* An entry in the array of ABS_XXX values */ |
| typedef struct ABSEntry { |
| /* Minimum ABS_XXX value. */ |
| uint32_t min; |
| /* Maximum ABS_XXX value. */ |
| uint32_t max; |
| /* 'fuzz;, and 'flat' ABS_XXX values are always zero here. */ |
| uint32_t fuzz; |
| uint32_t flat; |
| } ABSEntry; |
| |
| |
| /* modify this each time you change the events_device structure. you |
| * will also need to upadte events_state_load and events_state_save |
| */ |
| #define EVENTS_STATE_SAVE_VERSION 2 |
| |
| #undef QFIELD_STRUCT |
| #define QFIELD_STRUCT events_state |
| |
| QFIELD_BEGIN(events_state_fields) |
| QFIELD_INT32(pending), |
| QFIELD_INT32(page), |
| QFIELD_BUFFER(events), |
| QFIELD_INT32(first), |
| QFIELD_INT32(last), |
| QFIELD_INT32(state), |
| QFIELD_END |
| |
| static void events_state_save(QEMUFile* f, void* opaque) |
| { |
| events_state* s = opaque; |
| |
| qemu_put_struct(f, events_state_fields, s); |
| } |
| |
| static int events_state_load(QEMUFile* f, void* opaque, int version_id) |
| { |
| events_state* s = opaque; |
| |
| if (version_id != EVENTS_STATE_SAVE_VERSION) |
| return -1; |
| |
| return qemu_get_struct(f, events_state_fields, s); |
| } |
| |
| static void enqueue_event(events_state *s, unsigned int type, unsigned int code, int value) |
| { |
| int enqueued = s->last - s->first; |
| |
| if (enqueued < 0) |
| enqueued += MAX_EVENTS; |
| |
| if (enqueued + 3 > MAX_EVENTS) { |
| fprintf(stderr, "##KBD: Full queue, lose event\n"); |
| return; |
| } |
| |
| if(s->first == s->last) { |
| if (s->state == STATE_LIVE) |
| qemu_irq_raise(s->irq); |
| else { |
| s->state = STATE_BUFFERED; |
| } |
| } |
| |
| //fprintf(stderr, "##KBD: type=%d code=%d value=%d\n", type, code, value); |
| |
| s->events[s->last] = type; |
| s->last = (s->last + 1) & (MAX_EVENTS-1); |
| s->events[s->last] = code; |
| s->last = (s->last + 1) & (MAX_EVENTS-1); |
| s->events[s->last] = value; |
| s->last = (s->last + 1) & (MAX_EVENTS-1); |
| } |
| |
| static unsigned dequeue_event(events_state *s) |
| { |
| unsigned n; |
| |
| if(s->first == s->last) { |
| return 0; |
| } |
| |
| n = s->events[s->first]; |
| |
| s->first = (s->first + 1) & (MAX_EVENTS - 1); |
| |
| if(s->first == s->last) { |
| qemu_irq_lower(s->irq); |
| } |
| #ifdef TARGET_I386 |
| /* |
| * Adding the logic to handle edge-triggered interrupts for x86 |
| * because the exisiting goldfish events device basically provides |
| * level-trigger interrupts only. |
| * |
| * Logic: When an event (including the type/code/value) is fetched |
| * by the driver, if there is still another event in the event |
| * queue, the goldfish event device will re-assert the IRQ so that |
| * the driver can be notified to fetch the event again. |
| */ |
| else if (((s->first + 2) & (MAX_EVENTS - 1)) < s->last || |
| (s->first & (MAX_EVENTS - 1)) > s->last) { /* if there still is an event */ |
| qemu_irq_lower(s->irq); |
| qemu_irq_raise(s->irq); |
| } |
| #endif |
| return n; |
| } |
| |
| static int get_page_len(events_state *s) |
| { |
| int page = s->page; |
| if (page == PAGE_NAME) { |
| const char* name = s->name; |
| return strlen(name); |
| } if (page >= PAGE_EVBITS && page <= PAGE_EVBITS + EV_MAX) |
| return s->ev_bits[page - PAGE_EVBITS].len; |
| if (page == PAGE_ABSDATA) |
| return s->abs_info_count * sizeof(s->abs_info[0]); |
| return 0; |
| } |
| |
| static int get_page_data(events_state *s, int offset) |
| { |
| int page_len = get_page_len(s); |
| int page = s->page; |
| if (offset > page_len) |
| return 0; |
| if (page == PAGE_NAME) { |
| const char* name = s->name; |
| return name[offset]; |
| } if (page >= PAGE_EVBITS && page <= PAGE_EVBITS + EV_MAX) |
| return s->ev_bits[page - PAGE_EVBITS].bits[offset]; |
| if (page == PAGE_ABSDATA) { |
| return s->abs_info[offset / sizeof(s->abs_info[0])]; |
| } |
| return 0; |
| } |
| |
| static uint32_t events_read(void *x, target_phys_addr_t off) |
| { |
| events_state *s = (events_state *) x; |
| int offset = off; // - s->base; |
| |
| /* This gross hack below is used to ensure that we |
| * only raise the IRQ when the kernel driver is |
| * properly ready! If done before this, the driver |
| * becomes confused and ignores all input events |
| * as soon as one was buffered! |
| */ |
| if (offset == REG_LEN && s->page == PAGE_ABSDATA) { |
| if (s->state == STATE_BUFFERED) |
| qemu_irq_raise(s->irq); |
| s->state = STATE_LIVE; |
| } |
| |
| if (offset == REG_READ) |
| return dequeue_event(s); |
| else if (offset == REG_LEN) |
| return get_page_len(s); |
| else if (offset >= REG_DATA) |
| return get_page_data(s, offset - REG_DATA); |
| return 0; // this shouldn't happen, if the driver does the right thing |
| } |
| |
| static void events_write(void *x, target_phys_addr_t off, uint32_t val) |
| { |
| events_state *s = (events_state *) x; |
| int offset = off; // - s->base; |
| if (offset == REG_SET_PAGE) |
| s->page = val; |
| } |
| |
| static CPUReadMemoryFunc *events_readfn[] = { |
| events_read, |
| events_read, |
| events_read |
| }; |
| |
| static CPUWriteMemoryFunc *events_writefn[] = { |
| events_write, |
| events_write, |
| events_write |
| }; |
| |
| static void events_put_keycode(void *x, int keycode) |
| { |
| events_state *s = (events_state *) x; |
| |
| enqueue_event(s, EV_KEY, keycode&0x1ff, (keycode&0x200) ? 1 : 0); |
| } |
| |
| static void events_put_mouse(void *opaque, int dx, int dy, int dz, int buttons_state) |
| { |
| events_state *s = (events_state *) opaque; |
| /* in the Android emulator, we use dz == 0 for touchscreen events, |
| * and dz == 1 for trackball events. See the kbd_mouse_event calls |
| * in android/skin/trackball.c and android/skin/window.c |
| */ |
| if (dz == 0) { |
| if (android_hw->hw_multiTouch) { |
| /* Convert mouse event into multi-touch event */ |
| multitouch_update_pointer(MTES_MOUSE, 0, dx, dy, |
| (buttons_state & 1) ? 0x81 : 0); |
| } else if (android_hw->hw_touchScreen) { |
| enqueue_event(s, EV_ABS, ABS_X, dx); |
| enqueue_event(s, EV_ABS, ABS_Y, dy); |
| enqueue_event(s, EV_ABS, ABS_Z, dz); |
| enqueue_event(s, EV_KEY, BTN_TOUCH, buttons_state&1); |
| enqueue_event(s, EV_SYN, 0, 0); |
| } |
| } else { |
| enqueue_event(s, EV_REL, REL_X, dx); |
| enqueue_event(s, EV_REL, REL_Y, dy); |
| enqueue_event(s, EV_SYN, 0, 0); |
| } |
| } |
| |
| static void events_put_generic(void* opaque, int type, int code, int value) |
| { |
| events_state *s = (events_state *) opaque; |
| |
| enqueue_event(s, type, code, value); |
| } |
| |
| /* set bits [bitl..bith] in the ev_bits[type] array |
| */ |
| static void |
| events_set_bits(events_state *s, int type, int bitl, int bith) |
| { |
| uint8_t *bits; |
| uint8_t maskl, maskh; |
| int il, ih; |
| il = bitl / 8; |
| ih = bith / 8; |
| if (ih >= s->ev_bits[type].len) { |
| bits = qemu_mallocz(ih + 1); |
| if (bits == NULL) |
| return; |
| memcpy(bits, s->ev_bits[type].bits, s->ev_bits[type].len); |
| qemu_free(s->ev_bits[type].bits); |
| s->ev_bits[type].bits = bits; |
| s->ev_bits[type].len = ih + 1; |
| } |
| else |
| bits = s->ev_bits[type].bits; |
| maskl = 0xffU << (bitl & 7); |
| maskh = 0xffU >> (7 - (bith & 7)); |
| if (il >= ih) |
| maskh &= maskl; |
| else { |
| bits[il] |= maskl; |
| while (++il < ih) |
| bits[il] = 0xff; |
| } |
| bits[ih] |= maskh; |
| } |
| |
| static void |
| events_set_bit(events_state* s, int type, int bit) |
| { |
| events_set_bits(s, type, bit, bit); |
| } |
| |
| static void |
| events_clr_bit(events_state* s, int type, int bit) |
| { |
| int ii = bit / 8; |
| if (ii < s->ev_bits[type].len) { |
| uint8_t* bits = s->ev_bits[type].bits; |
| uint8_t mask = 0x01U << (bit & 7); |
| bits[ii] &= ~mask; |
| } |
| } |
| |
| void events_dev_init(uint32_t base, qemu_irq irq) |
| { |
| events_state *s; |
| int iomemtype; |
| AndroidHwConfig* config = android_hw; |
| |
| s = (events_state *) qemu_mallocz(sizeof(events_state)); |
| |
| /* now set the events capability bits depending on hardware configuration */ |
| /* apparently, the EV_SYN array is used to indicate which other |
| * event classes to consider. |
| */ |
| |
| /* configure EV_KEY array |
| * |
| * All Android devices must have the following keys: |
| * KEY_HOME, KEY_BACK, KEY_SEND (Call), KEY_END (EndCall), |
| * KEY_SOFT1 (Menu), VOLUME_UP, VOLUME_DOWN |
| * |
| * Note that previous models also had a KEY_SOFT2, |
| * and a KEY_POWER which we still support here. |
| * |
| * Newer models have a KEY_SEARCH key, which we always |
| * enable here. |
| * |
| * A Dpad will send: KEY_DOWN / UP / LEFT / RIGHT / CENTER |
| * |
| * The KEY_CAMERA button isn't very useful if there is no camera. |
| * |
| * BTN_MOUSE is sent when the trackball is pressed |
| * BTN_TOUCH is sent when the touchscreen is pressed |
| */ |
| events_set_bit (s, EV_SYN, EV_KEY ); |
| |
| events_set_bit(s, EV_KEY, KEY_HOME); |
| events_set_bit(s, EV_KEY, KEY_BACK); |
| events_set_bit(s, EV_KEY, KEY_SEND); |
| events_set_bit(s, EV_KEY, KEY_END); |
| events_set_bit(s, EV_KEY, KEY_SOFT1); |
| events_set_bit(s, EV_KEY, KEY_VOLUMEUP); |
| events_set_bit(s, EV_KEY, KEY_VOLUMEDOWN); |
| events_set_bit(s, EV_KEY, KEY_SOFT2); |
| events_set_bit(s, EV_KEY, KEY_POWER); |
| events_set_bit(s, EV_KEY, KEY_SEARCH); |
| |
| if (config->hw_dPad) { |
| events_set_bit(s, EV_KEY, KEY_DOWN); |
| events_set_bit(s, EV_KEY, KEY_UP); |
| events_set_bit(s, EV_KEY, KEY_LEFT); |
| events_set_bit(s, EV_KEY, KEY_RIGHT); |
| events_set_bit(s, EV_KEY, KEY_CENTER); |
| } |
| |
| if (config->hw_trackBall) { |
| events_set_bit(s, EV_KEY, BTN_MOUSE); |
| } |
| if (config->hw_touchScreen) { |
| events_set_bit(s, EV_KEY, BTN_TOUCH); |
| } |
| |
| if (config->hw_camera) { |
| events_set_bit(s, EV_KEY, KEY_CAMERA); |
| } |
| |
| if (config->hw_keyboard) { |
| /* since we want to implement Unicode reverse-mapping |
| * allow any kind of key, even those not available on |
| * the skin. |
| * |
| * the previous code did set the [1..0x1ff] range, but |
| * we don't want to enable certain bits in the middle |
| * of the range that are registered for mouse/trackball/joystick |
| * events. |
| * |
| * see "linux_keycodes.h" for the list of events codes. |
| */ |
| events_set_bits(s, EV_KEY, 1, 0xff); |
| events_set_bits(s, EV_KEY, 0x160, 0x1ff); |
| |
| /* If there is a keyboard, but no DPad, we need to clear the |
| * corresponding bits. Doing this is simpler than trying to exclude |
| * the DPad values from the ranges above. |
| */ |
| if (!config->hw_dPad) { |
| events_clr_bit(s, EV_KEY, KEY_DOWN); |
| events_clr_bit(s, EV_KEY, KEY_UP); |
| events_clr_bit(s, EV_KEY, KEY_LEFT); |
| events_clr_bit(s, EV_KEY, KEY_RIGHT); |
| events_clr_bit(s, EV_KEY, KEY_CENTER); |
| } |
| } |
| |
| /* configure EV_REL array |
| * |
| * EV_REL events are sent when the trackball is moved |
| */ |
| if (config->hw_trackBall) { |
| events_set_bit (s, EV_SYN, EV_REL ); |
| events_set_bits(s, EV_REL, REL_X, REL_Y); |
| } |
| |
| /* configure EV_ABS array. |
| * |
| * EV_ABS events are sent when the touchscreen is pressed |
| */ |
| if (config->hw_touchScreen || config->hw_multiTouch) { |
| ABSEntry* abs_values; |
| |
| events_set_bit (s, EV_SYN, EV_ABS ); |
| events_set_bits(s, EV_ABS, ABS_X, ABS_Z); |
| /* Allocate the absinfo to report the min/max bounds for each |
| * absolute dimension. The array must contain 3, or ABS_MAX tuples |
| * of (min,max,fuzz,flat) 32-bit values. |
| * |
| * min and max are the bounds |
| * fuzz corresponds to the device's fuziness, we set it to 0 |
| * flat corresponds to the flat position for JOEYDEV devices, |
| * we also set it to 0. |
| * |
| * There is no need to save/restore this array in a snapshot |
| * since the values only depend on the hardware configuration. |
| */ |
| s->abs_info_count = config->hw_multiTouch ? ABS_MAX * 4 : 3 * 4; |
| const int abs_size = sizeof(uint32_t) * s->abs_info_count; |
| s->abs_info = malloc(abs_size); |
| memset(s->abs_info, 0, abs_size); |
| abs_values = (ABSEntry*)s->abs_info; |
| |
| abs_values[ABS_X].max = config->hw_lcd_width-1; |
| abs_values[ABS_Y].max = config->hw_lcd_height-1; |
| abs_values[ABS_Z].max = 1; |
| |
| if (config->hw_multiTouch) { |
| /* |
| * Setup multitouch. |
| */ |
| events_set_bit(s, EV_ABS, ABS_MT_SLOT); |
| events_set_bit(s, EV_ABS, ABS_MT_POSITION_X); |
| events_set_bit(s, EV_ABS, ABS_MT_POSITION_Y); |
| events_set_bit(s, EV_ABS, ABS_MT_TRACKING_ID); |
| events_set_bit(s, EV_ABS, ABS_MT_TOUCH_MAJOR); |
| events_set_bit(s, EV_ABS, ABS_MT_PRESSURE); |
| |
| abs_values[ABS_MT_SLOT].max = multitouch_get_max_slot(); |
| abs_values[ABS_MT_TRACKING_ID].max = abs_values[ABS_MT_SLOT].max + 1; |
| abs_values[ABS_MT_POSITION_X].max = abs_values[ABS_X].max; |
| abs_values[ABS_MT_POSITION_Y].max = abs_values[ABS_Y].max; |
| abs_values[ABS_MT_TOUCH_MAJOR].max = 0x7fffffff; // TODO: Make it less random |
| abs_values[ABS_MT_PRESSURE].max = 0x100; // TODO: Make it less random |
| } |
| } |
| |
| /* configure EV_SW array |
| * |
| * EV_SW events are sent to indicate that the keyboard lid |
| * was closed or opened (done when we switch layouts through |
| * KP-7 or KP-9). |
| * |
| * We only support this when hw.keyboard.lid is true. |
| */ |
| if (config->hw_keyboard && config->hw_keyboard_lid) { |
| events_set_bit(s, EV_SYN, EV_SW); |
| events_set_bit(s, EV_SW, 0); |
| } |
| |
| iomemtype = cpu_register_io_memory(events_readfn, events_writefn, s); |
| |
| cpu_register_physical_memory(base, 0xfff, iomemtype); |
| |
| qemu_add_kbd_event_handler(events_put_keycode, s); |
| qemu_add_mouse_event_handler(events_put_mouse, s, 1, "goldfish-events"); |
| |
| s->base = base; |
| s->irq = irq; |
| |
| s->first = 0; |
| s->last = 0; |
| s->state = STATE_INIT; |
| s->name = qemu_strdup(config->hw_keyboard_charmap); |
| |
| /* This function migh fire buffered events to the device, so |
| * ensure that it is called after initialization is complete |
| */ |
| user_event_register_generic(s, events_put_generic); |
| |
| register_savevm( "events_state", 0, EVENTS_STATE_SAVE_VERSION, |
| events_state_save, events_state_load, s ); |
| } |
