| /* |
| * QEMU PS/2 keyboard/mouse emulation |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "hw.h" |
| #include "ps2.h" |
| #include "console.h" |
| |
| /* debug PC keyboard */ |
| //#define DEBUG_KBD |
| |
| /* debug PC keyboard : only mouse */ |
| //#define DEBUG_MOUSE |
| |
| /* Keyboard Commands */ |
| #define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ |
| #define KBD_CMD_ECHO 0xEE |
| #define KBD_CMD_SCANCODE 0xF0 /* Get/set scancode set */ |
| #define KBD_CMD_GET_ID 0xF2 /* get keyboard ID */ |
| #define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ |
| #define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ |
| #define KBD_CMD_RESET_DISABLE 0xF5 /* reset and disable scanning */ |
| #define KBD_CMD_RESET_ENABLE 0xF6 /* reset and enable scanning */ |
| #define KBD_CMD_RESET 0xFF /* Reset */ |
| |
| /* Keyboard Replies */ |
| #define KBD_REPLY_POR 0xAA /* Power on reset */ |
| #define KBD_REPLY_ID 0xAB /* Keyboard ID */ |
| #define KBD_REPLY_ACK 0xFA /* Command ACK */ |
| #define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ |
| |
| /* Mouse Commands */ |
| #define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */ |
| #define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */ |
| #define AUX_SET_RES 0xE8 /* Set resolution */ |
| #define AUX_GET_SCALE 0xE9 /* Get scaling factor */ |
| #define AUX_SET_STREAM 0xEA /* Set stream mode */ |
| #define AUX_POLL 0xEB /* Poll */ |
| #define AUX_RESET_WRAP 0xEC /* Reset wrap mode */ |
| #define AUX_SET_WRAP 0xEE /* Set wrap mode */ |
| #define AUX_SET_REMOTE 0xF0 /* Set remote mode */ |
| #define AUX_GET_TYPE 0xF2 /* Get type */ |
| #define AUX_SET_SAMPLE 0xF3 /* Set sample rate */ |
| #define AUX_ENABLE_DEV 0xF4 /* Enable aux device */ |
| #define AUX_DISABLE_DEV 0xF5 /* Disable aux device */ |
| #define AUX_SET_DEFAULT 0xF6 |
| #define AUX_RESET 0xFF /* Reset aux device */ |
| #define AUX_ACK 0xFA /* Command byte ACK. */ |
| |
| #define MOUSE_STATUS_REMOTE 0x40 |
| #define MOUSE_STATUS_ENABLED 0x20 |
| #define MOUSE_STATUS_SCALE21 0x10 |
| |
| #define PS2_QUEUE_SIZE 256 |
| |
| typedef struct { |
| uint8_t data[PS2_QUEUE_SIZE]; |
| int rptr, wptr, count; |
| } PS2Queue; |
| |
| typedef struct { |
| PS2Queue queue; |
| int32_t write_cmd; |
| void (*update_irq)(void *, int); |
| void *update_arg; |
| } PS2State; |
| |
| typedef struct { |
| PS2State common; |
| int scan_enabled; |
| /* Qemu uses translated PC scancodes internally. To avoid multiple |
| conversions we do the translation (if any) in the PS/2 emulation |
| not the keyboard controller. */ |
| int translate; |
| int scancode_set; /* 1=XT, 2=AT, 3=PS/2 */ |
| } PS2KbdState; |
| |
| typedef struct { |
| PS2State common; |
| uint8_t mouse_status; |
| uint8_t mouse_resolution; |
| uint8_t mouse_sample_rate; |
| uint8_t mouse_wrap; |
| uint8_t mouse_type; /* 0 = PS2, 3 = IMPS/2, 4 = IMEX */ |
| uint8_t mouse_detect_state; |
| int mouse_dx; /* current values, needed for 'poll' mode */ |
| int mouse_dy; |
| int mouse_dz; |
| uint8_t mouse_buttons; |
| } PS2MouseState; |
| |
| /* Table to convert from PC scancodes to raw scancodes. */ |
| static const unsigned char ps2_raw_keycode[128] = { |
| 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13, |
| 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27, |
| 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42, |
| 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3, |
| 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105, |
| 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63, |
| 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111, |
| 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110 |
| }; |
| |
| void ps2_queue(void *opaque, int b) |
| { |
| PS2State *s = (PS2State *)opaque; |
| PS2Queue *q = &s->queue; |
| |
| if (q->count >= PS2_QUEUE_SIZE) |
| return; |
| q->data[q->wptr] = b; |
| if (++q->wptr == PS2_QUEUE_SIZE) |
| q->wptr = 0; |
| q->count++; |
| s->update_irq(s->update_arg, 1); |
| } |
| |
| /* |
| keycode is expressed as follow: |
| bit 7 - 0 key pressed, 1 = key released |
| bits 6-0 - translated scancode set 2 |
| */ |
| static void ps2_put_keycode(void *opaque, int keycode) |
| { |
| PS2KbdState *s = opaque; |
| |
| /* XXX: add support for scancode sets 1 and 3 */ |
| if (!s->translate && keycode < 0xe0 && s->scancode_set == 2) |
| { |
| if (keycode & 0x80) |
| ps2_queue(&s->common, 0xf0); |
| keycode = ps2_raw_keycode[keycode & 0x7f]; |
| } |
| ps2_queue(&s->common, keycode); |
| } |
| |
| uint32_t ps2_read_data(void *opaque) |
| { |
| PS2State *s = (PS2State *)opaque; |
| PS2Queue *q; |
| int val, index; |
| |
| q = &s->queue; |
| if (q->count == 0) { |
| /* NOTE: if no data left, we return the last keyboard one |
| (needed for EMM386) */ |
| /* XXX: need a timer to do things correctly */ |
| index = q->rptr - 1; |
| if (index < 0) |
| index = PS2_QUEUE_SIZE - 1; |
| val = q->data[index]; |
| } else { |
| val = q->data[q->rptr]; |
| if (++q->rptr == PS2_QUEUE_SIZE) |
| q->rptr = 0; |
| q->count--; |
| /* reading deasserts IRQ */ |
| s->update_irq(s->update_arg, 0); |
| /* reassert IRQs if data left */ |
| s->update_irq(s->update_arg, q->count != 0); |
| } |
| return val; |
| } |
| |
| static void ps2_reset_keyboard(PS2KbdState *s) |
| { |
| s->scan_enabled = 1; |
| s->scancode_set = 2; |
| } |
| |
| void ps2_write_keyboard(void *opaque, int val) |
| { |
| PS2KbdState *s = (PS2KbdState *)opaque; |
| |
| switch(s->common.write_cmd) { |
| default: |
| case -1: |
| switch(val) { |
| case 0x00: |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| break; |
| case 0x05: |
| ps2_queue(&s->common, KBD_REPLY_RESEND); |
| break; |
| case KBD_CMD_GET_ID: |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| /* We emulate a MF2 AT keyboard here */ |
| ps2_queue(&s->common, KBD_REPLY_ID); |
| if (s->translate) |
| ps2_queue(&s->common, 0x41); |
| else |
| ps2_queue(&s->common, 0x83); |
| break; |
| case KBD_CMD_ECHO: |
| ps2_queue(&s->common, KBD_CMD_ECHO); |
| break; |
| case KBD_CMD_ENABLE: |
| s->scan_enabled = 1; |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| break; |
| case KBD_CMD_SCANCODE: |
| case KBD_CMD_SET_LEDS: |
| case KBD_CMD_SET_RATE: |
| s->common.write_cmd = val; |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| break; |
| case KBD_CMD_RESET_DISABLE: |
| ps2_reset_keyboard(s); |
| s->scan_enabled = 0; |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| break; |
| case KBD_CMD_RESET_ENABLE: |
| ps2_reset_keyboard(s); |
| s->scan_enabled = 1; |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| break; |
| case KBD_CMD_RESET: |
| ps2_reset_keyboard(s); |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| ps2_queue(&s->common, KBD_REPLY_POR); |
| break; |
| default: |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| break; |
| } |
| break; |
| case KBD_CMD_SCANCODE: |
| if (val == 0) { |
| if (s->scancode_set == 1) |
| ps2_put_keycode(s, 0x43); |
| else if (s->scancode_set == 2) |
| ps2_put_keycode(s, 0x41); |
| else if (s->scancode_set == 3) |
| ps2_put_keycode(s, 0x3f); |
| } else { |
| if (val >= 1 && val <= 3) |
| s->scancode_set = val; |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| } |
| s->common.write_cmd = -1; |
| break; |
| case KBD_CMD_SET_LEDS: |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| s->common.write_cmd = -1; |
| break; |
| case KBD_CMD_SET_RATE: |
| ps2_queue(&s->common, KBD_REPLY_ACK); |
| s->common.write_cmd = -1; |
| break; |
| } |
| } |
| |
| /* Set the scancode translation mode. |
| 0 = raw scancodes. |
| 1 = translated scancodes (used by qemu internally). */ |
| |
| void ps2_keyboard_set_translation(void *opaque, int mode) |
| { |
| PS2KbdState *s = (PS2KbdState *)opaque; |
| s->translate = mode; |
| } |
| |
| static void ps2_mouse_send_packet(PS2MouseState *s) |
| { |
| unsigned int b; |
| int dx1, dy1, dz1; |
| |
| dx1 = s->mouse_dx; |
| dy1 = s->mouse_dy; |
| dz1 = s->mouse_dz; |
| /* XXX: increase range to 8 bits ? */ |
| if (dx1 > 127) |
| dx1 = 127; |
| else if (dx1 < -127) |
| dx1 = -127; |
| if (dy1 > 127) |
| dy1 = 127; |
| else if (dy1 < -127) |
| dy1 = -127; |
| b = 0x08 | ((dx1 < 0) << 4) | ((dy1 < 0) << 5) | (s->mouse_buttons & 0x07); |
| ps2_queue(&s->common, b); |
| ps2_queue(&s->common, dx1 & 0xff); |
| ps2_queue(&s->common, dy1 & 0xff); |
| /* extra byte for IMPS/2 or IMEX */ |
| switch(s->mouse_type) { |
| default: |
| break; |
| case 3: |
| if (dz1 > 127) |
| dz1 = 127; |
| else if (dz1 < -127) |
| dz1 = -127; |
| ps2_queue(&s->common, dz1 & 0xff); |
| break; |
| case 4: |
| if (dz1 > 7) |
| dz1 = 7; |
| else if (dz1 < -7) |
| dz1 = -7; |
| b = (dz1 & 0x0f) | ((s->mouse_buttons & 0x18) << 1); |
| ps2_queue(&s->common, b); |
| break; |
| } |
| |
| /* update deltas */ |
| s->mouse_dx -= dx1; |
| s->mouse_dy -= dy1; |
| s->mouse_dz -= dz1; |
| } |
| |
| static void ps2_mouse_event(void *opaque, |
| int dx, int dy, int dz, int buttons_state) |
| { |
| PS2MouseState *s = opaque; |
| |
| /* check if deltas are recorded when disabled */ |
| if (!(s->mouse_status & MOUSE_STATUS_ENABLED)) |
| return; |
| |
| s->mouse_dx += dx; |
| s->mouse_dy -= dy; |
| s->mouse_dz += dz; |
| /* XXX: SDL sometimes generates nul events: we delete them */ |
| if (s->mouse_dx == 0 && s->mouse_dy == 0 && s->mouse_dz == 0 && |
| s->mouse_buttons == buttons_state) |
| return; |
| s->mouse_buttons = buttons_state; |
| |
| if (!(s->mouse_status & MOUSE_STATUS_REMOTE) && |
| (s->common.queue.count < (PS2_QUEUE_SIZE - 16))) { |
| for(;;) { |
| /* if not remote, send event. Multiple events are sent if |
| too big deltas */ |
| ps2_mouse_send_packet(s); |
| if (s->mouse_dx == 0 && s->mouse_dy == 0 && s->mouse_dz == 0) |
| break; |
| } |
| } |
| } |
| |
| void ps2_mouse_fake_event(void *opaque) |
| { |
| ps2_mouse_event(opaque, 1, 0, 0, 0); |
| } |
| |
| void ps2_write_mouse(void *opaque, int val) |
| { |
| PS2MouseState *s = (PS2MouseState *)opaque; |
| #ifdef DEBUG_MOUSE |
| printf("kbd: write mouse 0x%02x\n", val); |
| #endif |
| switch(s->common.write_cmd) { |
| default: |
| case -1: |
| /* mouse command */ |
| if (s->mouse_wrap) { |
| if (val == AUX_RESET_WRAP) { |
| s->mouse_wrap = 0; |
| ps2_queue(&s->common, AUX_ACK); |
| return; |
| } else if (val != AUX_RESET) { |
| ps2_queue(&s->common, val); |
| return; |
| } |
| } |
| switch(val) { |
| case AUX_SET_SCALE11: |
| s->mouse_status &= ~MOUSE_STATUS_SCALE21; |
| ps2_queue(&s->common, AUX_ACK); |
| break; |
| case AUX_SET_SCALE21: |
| s->mouse_status |= MOUSE_STATUS_SCALE21; |
| ps2_queue(&s->common, AUX_ACK); |
| break; |
| case AUX_SET_STREAM: |
| s->mouse_status &= ~MOUSE_STATUS_REMOTE; |
| ps2_queue(&s->common, AUX_ACK); |
| break; |
| case AUX_SET_WRAP: |
| s->mouse_wrap = 1; |
| ps2_queue(&s->common, AUX_ACK); |
| break; |
| case AUX_SET_REMOTE: |
| s->mouse_status |= MOUSE_STATUS_REMOTE; |
| ps2_queue(&s->common, AUX_ACK); |
| break; |
| case AUX_GET_TYPE: |
| ps2_queue(&s->common, AUX_ACK); |
| ps2_queue(&s->common, s->mouse_type); |
| break; |
| case AUX_SET_RES: |
| case AUX_SET_SAMPLE: |
| s->common.write_cmd = val; |
| ps2_queue(&s->common, AUX_ACK); |
| break; |
| case AUX_GET_SCALE: |
| ps2_queue(&s->common, AUX_ACK); |
| ps2_queue(&s->common, s->mouse_status); |
| ps2_queue(&s->common, s->mouse_resolution); |
| ps2_queue(&s->common, s->mouse_sample_rate); |
| break; |
| case AUX_POLL: |
| ps2_queue(&s->common, AUX_ACK); |
| ps2_mouse_send_packet(s); |
| break; |
| case AUX_ENABLE_DEV: |
| s->mouse_status |= MOUSE_STATUS_ENABLED; |
| ps2_queue(&s->common, AUX_ACK); |
| break; |
| case AUX_DISABLE_DEV: |
| s->mouse_status &= ~MOUSE_STATUS_ENABLED; |
| ps2_queue(&s->common, AUX_ACK); |
| break; |
| case AUX_SET_DEFAULT: |
| s->mouse_sample_rate = 100; |
| s->mouse_resolution = 2; |
| s->mouse_status = 0; |
| ps2_queue(&s->common, AUX_ACK); |
| break; |
| case AUX_RESET: |
| s->mouse_sample_rate = 100; |
| s->mouse_resolution = 2; |
| s->mouse_status = 0; |
| s->mouse_type = 0; |
| ps2_queue(&s->common, AUX_ACK); |
| ps2_queue(&s->common, 0xaa); |
| ps2_queue(&s->common, s->mouse_type); |
| break; |
| default: |
| break; |
| } |
| break; |
| case AUX_SET_SAMPLE: |
| s->mouse_sample_rate = val; |
| /* detect IMPS/2 or IMEX */ |
| switch(s->mouse_detect_state) { |
| default: |
| case 0: |
| if (val == 200) |
| s->mouse_detect_state = 1; |
| break; |
| case 1: |
| if (val == 100) |
| s->mouse_detect_state = 2; |
| else if (val == 200) |
| s->mouse_detect_state = 3; |
| else |
| s->mouse_detect_state = 0; |
| break; |
| case 2: |
| if (val == 80) |
| s->mouse_type = 3; /* IMPS/2 */ |
| s->mouse_detect_state = 0; |
| break; |
| case 3: |
| if (val == 80) |
| s->mouse_type = 4; /* IMEX */ |
| s->mouse_detect_state = 0; |
| break; |
| } |
| ps2_queue(&s->common, AUX_ACK); |
| s->common.write_cmd = -1; |
| break; |
| case AUX_SET_RES: |
| s->mouse_resolution = val; |
| ps2_queue(&s->common, AUX_ACK); |
| s->common.write_cmd = -1; |
| break; |
| } |
| } |
| |
| static void ps2_reset(void *opaque) |
| { |
| PS2State *s = (PS2State *)opaque; |
| PS2Queue *q; |
| s->write_cmd = -1; |
| q = &s->queue; |
| q->rptr = 0; |
| q->wptr = 0; |
| q->count = 0; |
| s->update_irq(s->update_arg, 0); |
| } |
| |
| static void ps2_common_save (QEMUFile *f, PS2State *s) |
| { |
| qemu_put_be32 (f, s->write_cmd); |
| qemu_put_be32 (f, s->queue.rptr); |
| qemu_put_be32 (f, s->queue.wptr); |
| qemu_put_be32 (f, s->queue.count); |
| qemu_put_buffer (f, s->queue.data, sizeof (s->queue.data)); |
| } |
| |
| static void ps2_common_load (QEMUFile *f, PS2State *s) |
| { |
| s->write_cmd=qemu_get_be32 (f); |
| s->queue.rptr=qemu_get_be32 (f); |
| s->queue.wptr=qemu_get_be32 (f); |
| s->queue.count=qemu_get_be32 (f); |
| qemu_get_buffer (f, s->queue.data, sizeof (s->queue.data)); |
| } |
| |
| static void ps2_kbd_save(QEMUFile* f, void* opaque) |
| { |
| PS2KbdState *s = (PS2KbdState*)opaque; |
| |
| ps2_common_save (f, &s->common); |
| qemu_put_be32(f, s->scan_enabled); |
| qemu_put_be32(f, s->translate); |
| qemu_put_be32(f, s->scancode_set); |
| } |
| |
| static void ps2_mouse_save(QEMUFile* f, void* opaque) |
| { |
| PS2MouseState *s = (PS2MouseState*)opaque; |
| |
| ps2_common_save (f, &s->common); |
| qemu_put_8s(f, &s->mouse_status); |
| qemu_put_8s(f, &s->mouse_resolution); |
| qemu_put_8s(f, &s->mouse_sample_rate); |
| qemu_put_8s(f, &s->mouse_wrap); |
| qemu_put_8s(f, &s->mouse_type); |
| qemu_put_8s(f, &s->mouse_detect_state); |
| qemu_put_be32(f, s->mouse_dx); |
| qemu_put_be32(f, s->mouse_dy); |
| qemu_put_be32(f, s->mouse_dz); |
| qemu_put_8s(f, &s->mouse_buttons); |
| } |
| |
| static int ps2_kbd_load(QEMUFile* f, void* opaque, int version_id) |
| { |
| PS2KbdState *s = (PS2KbdState*)opaque; |
| |
| if (version_id != 2 && version_id != 3) |
| return -EINVAL; |
| |
| ps2_common_load (f, &s->common); |
| s->scan_enabled=qemu_get_be32(f); |
| s->translate=qemu_get_be32(f); |
| if (version_id == 3) |
| s->scancode_set=qemu_get_be32(f); |
| else |
| s->scancode_set=2; |
| return 0; |
| } |
| |
| static int ps2_mouse_load(QEMUFile* f, void* opaque, int version_id) |
| { |
| PS2MouseState *s = (PS2MouseState*)opaque; |
| |
| if (version_id != 2) |
| return -EINVAL; |
| |
| ps2_common_load (f, &s->common); |
| qemu_get_8s(f, &s->mouse_status); |
| qemu_get_8s(f, &s->mouse_resolution); |
| qemu_get_8s(f, &s->mouse_sample_rate); |
| qemu_get_8s(f, &s->mouse_wrap); |
| qemu_get_8s(f, &s->mouse_type); |
| qemu_get_8s(f, &s->mouse_detect_state); |
| s->mouse_dx=qemu_get_be32(f); |
| s->mouse_dy=qemu_get_be32(f); |
| s->mouse_dz=qemu_get_be32(f); |
| qemu_get_8s(f, &s->mouse_buttons); |
| return 0; |
| } |
| |
| void *ps2_kbd_init(void (*update_irq)(void *, int), void *update_arg) |
| { |
| PS2KbdState *s = (PS2KbdState *)qemu_mallocz(sizeof(PS2KbdState)); |
| |
| s->common.update_irq = update_irq; |
| s->common.update_arg = update_arg; |
| s->scancode_set = 2; |
| ps2_reset(&s->common); |
| register_savevm("ps2kbd", 0, 3, ps2_kbd_save, ps2_kbd_load, s); |
| //qemu_add_kbd_event_handler(ps2_put_keycode, s); |
| qemu_register_reset(ps2_reset, 0, &s->common); |
| return s; |
| } |
| |
| void *ps2_mouse_init(void (*update_irq)(void *, int), void *update_arg) |
| { |
| PS2MouseState *s = (PS2MouseState *)qemu_mallocz(sizeof(PS2MouseState)); |
| |
| s->common.update_irq = update_irq; |
| s->common.update_arg = update_arg; |
| ps2_reset(&s->common); |
| register_savevm("ps2mouse", 0, 2, ps2_mouse_save, ps2_mouse_load, s); |
| //qemu_add_mouse_event_handler(ps2_mouse_event, s, 0, "QEMU PS/2 Mouse"); |
| qemu_register_reset(ps2_reset, 0, &s->common); |
| return s; |
| } |
