| /* |
| * QEMU System Emulator |
| * |
| * Copyright (c) 2003-2008 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "sysemu.h" |
| #include "net.h" |
| #include "monitor.h" |
| #include "console.h" |
| |
| #include "hw/hw.h" |
| |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <time.h> |
| #include <errno.h> |
| #include <sys/time.h> |
| #include <signal.h> |
| #ifdef __FreeBSD__ |
| #include <sys/param.h> |
| #endif |
| |
| #ifdef __linux__ |
| #include <sys/ioctl.h> |
| #include <linux/rtc.h> |
| /* For the benefit of older linux systems which don't supply it, |
| we use a local copy of hpet.h. */ |
| /* #include <linux/hpet.h> */ |
| #include "hpet.h" |
| #endif |
| |
| #ifdef _WIN32 |
| #include <windows.h> |
| #include <mmsystem.h> |
| #endif |
| |
| #include "qemu-timer.h" |
| |
| /* Conversion factor from emulated instructions to virtual clock ticks. */ |
| int icount_time_shift; |
| /* Arbitrarily pick 1MIPS as the minimum allowable speed. */ |
| #define MAX_ICOUNT_SHIFT 10 |
| /* Compensate for varying guest execution speed. */ |
| int64_t qemu_icount_bias; |
| static QEMUTimer *icount_rt_timer; |
| static QEMUTimer *icount_vm_timer; |
| |
| /***********************************************************/ |
| /* guest cycle counter */ |
| |
| typedef struct TimersState { |
| int64_t cpu_ticks_prev; |
| int64_t cpu_ticks_offset; |
| int64_t cpu_clock_offset; |
| int32_t cpu_ticks_enabled; |
| int64_t dummy; |
| } TimersState; |
| |
| static void timer_save(QEMUFile *f, void *opaque) |
| { |
| TimersState *s = opaque; |
| |
| if (s->cpu_ticks_enabled) { |
| hw_error("cannot save state if virtual timers are running"); |
| } |
| qemu_put_be64(f, s->cpu_ticks_prev); |
| qemu_put_be64(f, s->cpu_ticks_offset); |
| qemu_put_be64(f, s->cpu_clock_offset); |
| } |
| |
| static int timer_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| TimersState *s = opaque; |
| |
| if (version_id != 1 && version_id != 2) |
| return -EINVAL; |
| if (s->cpu_ticks_enabled) { |
| return -EINVAL; |
| } |
| s->cpu_ticks_prev = qemu_get_sbe64(f); |
| s->cpu_ticks_offset = qemu_get_sbe64(f); |
| if (version_id == 2) { |
| s->cpu_clock_offset = qemu_get_sbe64(f); |
| } |
| return 0; |
| } |
| |
| |
| TimersState timers_state; |
| |
| /* return the host CPU cycle counter and handle stop/restart */ |
| int64_t cpu_get_ticks(void) |
| { |
| if (use_icount) { |
| return cpu_get_icount(); |
| } |
| if (!timers_state.cpu_ticks_enabled) { |
| return timers_state.cpu_ticks_offset; |
| } else { |
| int64_t ticks; |
| ticks = cpu_get_real_ticks(); |
| if (timers_state.cpu_ticks_prev > ticks) { |
| /* Note: non increasing ticks may happen if the host uses |
| software suspend */ |
| timers_state.cpu_ticks_offset += timers_state.cpu_ticks_prev - ticks; |
| } |
| timers_state.cpu_ticks_prev = ticks; |
| return ticks + timers_state.cpu_ticks_offset; |
| } |
| } |
| |
| /* return the host CPU monotonic timer and handle stop/restart */ |
| static int64_t cpu_get_clock(void) |
| { |
| int64_t ti; |
| if (!timers_state.cpu_ticks_enabled) { |
| return timers_state.cpu_clock_offset; |
| } else { |
| ti = get_clock(); |
| return ti + timers_state.cpu_clock_offset; |
| } |
| } |
| |
| #ifndef CONFIG_IOTHREAD |
| static int64_t qemu_icount_delta(void) |
| { |
| if (!use_icount) { |
| return 5000 * (int64_t) 1000000; |
| } else if (use_icount == 1) { |
| /* When not using an adaptive execution frequency |
| we tend to get badly out of sync with real time, |
| so just delay for a reasonable amount of time. */ |
| return 0; |
| } else { |
| return cpu_get_icount() - cpu_get_clock(); |
| } |
| } |
| #endif |
| |
| /* enable cpu_get_ticks() */ |
| void cpu_enable_ticks(void) |
| { |
| if (!timers_state.cpu_ticks_enabled) { |
| timers_state.cpu_ticks_offset -= cpu_get_real_ticks(); |
| timers_state.cpu_clock_offset -= get_clock(); |
| timers_state.cpu_ticks_enabled = 1; |
| } |
| } |
| |
| /* disable cpu_get_ticks() : the clock is stopped. You must not call |
| cpu_get_ticks() after that. */ |
| void cpu_disable_ticks(void) |
| { |
| if (timers_state.cpu_ticks_enabled) { |
| timers_state.cpu_ticks_offset = cpu_get_ticks(); |
| timers_state.cpu_clock_offset = cpu_get_clock(); |
| timers_state.cpu_ticks_enabled = 0; |
| } |
| } |
| |
| /***********************************************************/ |
| /* timers */ |
| |
| #define QEMU_CLOCK_REALTIME 0 |
| #define QEMU_CLOCK_VIRTUAL 1 |
| #define QEMU_CLOCK_HOST 2 |
| |
| struct QEMUClock { |
| int type; |
| int enabled; |
| |
| QEMUTimer *warp_timer; |
| }; |
| |
| struct QEMUTimer { |
| QEMUClock *clock; |
| int64_t expire_time; /* in nanoseconds */ |
| int scale; |
| QEMUTimerCB *cb; |
| void *opaque; |
| struct QEMUTimer *next; |
| }; |
| |
| struct qemu_alarm_timer { |
| char const *name; |
| int (*start)(struct qemu_alarm_timer *t); |
| void (*stop)(struct qemu_alarm_timer *t); |
| void (*rearm)(struct qemu_alarm_timer *t); |
| #if defined(__linux__) |
| int fd; |
| timer_t timer; |
| #elif defined(_WIN32) |
| HANDLE timer; |
| #endif |
| char expired; |
| char pending; |
| }; |
| |
| static struct qemu_alarm_timer *alarm_timer; |
| |
| static bool qemu_timer_expired_ns(QEMUTimer *timer_head, int64_t current_time) |
| { |
| return timer_head && (timer_head->expire_time <= current_time); |
| } |
| |
| int qemu_alarm_pending(void) |
| { |
| return alarm_timer->pending; |
| } |
| |
| static inline int alarm_has_dynticks(struct qemu_alarm_timer *t) |
| { |
| return !!t->rearm; |
| } |
| |
| static void qemu_rearm_alarm_timer(struct qemu_alarm_timer *t) |
| { |
| if (!alarm_has_dynticks(t)) |
| return; |
| |
| t->rearm(t); |
| } |
| |
| /* TODO: MIN_TIMER_REARM_NS should be optimized */ |
| #define MIN_TIMER_REARM_NS 250000 |
| |
| #ifdef _WIN32 |
| |
| static int mm_start_timer(struct qemu_alarm_timer *t); |
| static void mm_stop_timer(struct qemu_alarm_timer *t); |
| static void mm_rearm_timer(struct qemu_alarm_timer *t); |
| |
| static int win32_start_timer(struct qemu_alarm_timer *t); |
| static void win32_stop_timer(struct qemu_alarm_timer *t); |
| static void win32_rearm_timer(struct qemu_alarm_timer *t); |
| |
| #else |
| |
| static int unix_start_timer(struct qemu_alarm_timer *t); |
| static void unix_stop_timer(struct qemu_alarm_timer *t); |
| |
| #ifdef __linux__ |
| |
| static int dynticks_start_timer(struct qemu_alarm_timer *t); |
| static void dynticks_stop_timer(struct qemu_alarm_timer *t); |
| static void dynticks_rearm_timer(struct qemu_alarm_timer *t); |
| |
| static int hpet_start_timer(struct qemu_alarm_timer *t); |
| static void hpet_stop_timer(struct qemu_alarm_timer *t); |
| |
| static int rtc_start_timer(struct qemu_alarm_timer *t); |
| static void rtc_stop_timer(struct qemu_alarm_timer *t); |
| |
| #endif /* __linux__ */ |
| |
| #endif /* _WIN32 */ |
| |
| /* Correlation between real and virtual time is always going to be |
| fairly approximate, so ignore small variation. |
| When the guest is idle real and virtual time will be aligned in |
| the IO wait loop. */ |
| #define ICOUNT_WOBBLE (get_ticks_per_sec() / 10) |
| |
| static void icount_adjust(void) |
| { |
| int64_t cur_time; |
| int64_t cur_icount; |
| int64_t delta; |
| static int64_t last_delta; |
| /* If the VM is not running, then do nothing. */ |
| if (!vm_running) |
| return; |
| |
| cur_time = cpu_get_clock(); |
| cur_icount = qemu_get_clock_ns(vm_clock); |
| delta = cur_icount - cur_time; |
| /* FIXME: This is a very crude algorithm, somewhat prone to oscillation. */ |
| if (delta > 0 |
| && last_delta + ICOUNT_WOBBLE < delta * 2 |
| && icount_time_shift > 0) { |
| /* The guest is getting too far ahead. Slow time down. */ |
| icount_time_shift--; |
| } |
| if (delta < 0 |
| && last_delta - ICOUNT_WOBBLE > delta * 2 |
| && icount_time_shift < MAX_ICOUNT_SHIFT) { |
| /* The guest is getting too far behind. Speed time up. */ |
| icount_time_shift++; |
| } |
| last_delta = delta; |
| qemu_icount_bias = cur_icount - (qemu_icount << icount_time_shift); |
| } |
| |
| static void icount_adjust_rt(void * opaque) |
| { |
| qemu_mod_timer(icount_rt_timer, |
| qemu_get_clock_ms(rt_clock) + 1000); |
| icount_adjust(); |
| } |
| |
| static void icount_adjust_vm(void * opaque) |
| { |
| qemu_mod_timer(icount_vm_timer, |
| qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 10); |
| icount_adjust(); |
| } |
| |
| int64_t qemu_icount_round(int64_t count) |
| { |
| return (count + (1 << icount_time_shift) - 1) >> icount_time_shift; |
| } |
| |
| static struct qemu_alarm_timer alarm_timers[] = { |
| #ifndef _WIN32 |
| #ifdef __linux__ |
| /* HPET - if available - is preferred */ |
| {"hpet", hpet_start_timer, hpet_stop_timer, NULL}, |
| /* ...otherwise try RTC */ |
| {"rtc", rtc_start_timer, rtc_stop_timer, NULL}, |
| #endif |
| {"unix", unix_start_timer, unix_stop_timer, NULL}, |
| #ifdef __linux__ |
| /* on Linux, the 'dynticks' clock sometimes doesn't work |
| * properly. this results in the UI freezing while emulation |
| * continues, for several seconds... So move it to the end |
| * of the list. */ |
| {"dynticks", dynticks_start_timer, |
| dynticks_stop_timer, dynticks_rearm_timer}, |
| #endif |
| #else |
| {"mmtimer", mm_start_timer, mm_stop_timer, NULL}, |
| {"mmtimer2", mm_start_timer, mm_stop_timer, mm_rearm_timer}, |
| {"dynticks", win32_start_timer, win32_stop_timer, win32_rearm_timer}, |
| {"win32", win32_start_timer, win32_stop_timer, NULL}, |
| #endif |
| {NULL, } |
| }; |
| |
| static void show_available_alarms(void) |
| { |
| int i; |
| |
| printf("Available alarm timers, in order of precedence:\n"); |
| for (i = 0; alarm_timers[i].name; i++) |
| printf("%s\n", alarm_timers[i].name); |
| } |
| |
| void configure_alarms(char const *opt) |
| { |
| int i; |
| int cur = 0; |
| int count = ARRAY_SIZE(alarm_timers) - 1; |
| char *arg; |
| char *name; |
| struct qemu_alarm_timer tmp; |
| |
| if (!strcmp(opt, "?")) { |
| show_available_alarms(); |
| exit(0); |
| } |
| |
| arg = qemu_strdup(opt); |
| |
| /* Reorder the array */ |
| name = strtok(arg, ","); |
| while (name) { |
| for (i = 0; i < count && alarm_timers[i].name; i++) { |
| if (!strcmp(alarm_timers[i].name, name)) |
| break; |
| } |
| |
| if (i == count) { |
| fprintf(stderr, "Unknown clock %s\n", name); |
| goto next; |
| } |
| |
| if (i < cur) |
| /* Ignore */ |
| goto next; |
| |
| /* Swap */ |
| tmp = alarm_timers[i]; |
| alarm_timers[i] = alarm_timers[cur]; |
| alarm_timers[cur] = tmp; |
| |
| cur++; |
| next: |
| name = strtok(NULL, ","); |
| } |
| |
| qemu_free(arg); |
| |
| if (cur) { |
| /* Disable remaining timers */ |
| for (i = cur; i < count; i++) |
| alarm_timers[i].name = NULL; |
| } else { |
| show_available_alarms(); |
| exit(1); |
| } |
| } |
| |
| #define QEMU_NUM_CLOCKS 3 |
| |
| QEMUClock *rt_clock; |
| QEMUClock *vm_clock; |
| QEMUClock *host_clock; |
| |
| static QEMUTimer *active_timers[QEMU_NUM_CLOCKS]; |
| |
| static QEMUClock *qemu_new_clock(int type) |
| { |
| QEMUClock *clock; |
| clock = qemu_mallocz(sizeof(QEMUClock)); |
| clock->type = type; |
| clock->enabled = 1; |
| return clock; |
| } |
| |
| void qemu_clock_enable(QEMUClock *clock, int enabled) |
| { |
| clock->enabled = enabled; |
| } |
| |
| static int64_t vm_clock_warp_start; |
| |
| static void icount_warp_rt(void *opaque) |
| { |
| if (vm_clock_warp_start == -1) { |
| return; |
| } |
| |
| if (vm_running) { |
| int64_t clock = qemu_get_clock_ns(rt_clock); |
| int64_t warp_delta = clock - vm_clock_warp_start; |
| if (use_icount == 1) { |
| qemu_icount_bias += warp_delta; |
| } else { |
| /* |
| * In adaptive mode, do not let the vm_clock run too |
| * far ahead of real time. |
| */ |
| int64_t cur_time = cpu_get_clock(); |
| int64_t cur_icount = qemu_get_clock_ns(vm_clock); |
| int64_t delta = cur_time - cur_icount; |
| qemu_icount_bias += MIN(warp_delta, delta); |
| } |
| if (qemu_timer_expired(active_timers[QEMU_CLOCK_VIRTUAL], |
| qemu_get_clock_ns(vm_clock))) { |
| qemu_notify_event(); |
| } |
| } |
| vm_clock_warp_start = -1; |
| } |
| |
| void qemu_clock_warp(QEMUClock *clock) |
| { |
| int64_t deadline; |
| |
| if (!clock->warp_timer) { |
| return; |
| } |
| |
| /* |
| * There are too many global variables to make the "warp" behavior |
| * applicable to other clocks. But a clock argument removes the |
| * need for if statements all over the place. |
| */ |
| assert(clock == vm_clock); |
| |
| /* |
| * If the CPUs have been sleeping, advance the vm_clock timer now. This |
| * ensures that the deadline for the timer is computed correctly below. |
| * This also makes sure that the insn counter is synchronized before the |
| * CPU starts running, in case the CPU is woken by an event other than |
| * the earliest vm_clock timer. |
| */ |
| icount_warp_rt(NULL); |
| if (qemu_cpu_has_work(cpu_single_env) || !active_timers[clock->type]) { |
| qemu_del_timer(clock->warp_timer); |
| return; |
| } |
| |
| vm_clock_warp_start = qemu_get_clock_ns(rt_clock); |
| deadline = qemu_next_icount_deadline(); |
| if (deadline > 0) { |
| /* |
| * Ensure the vm_clock proceeds even when the virtual CPU goes to |
| * sleep. Otherwise, the CPU might be waiting for a future timer |
| * interrupt to wake it up, but the interrupt never comes because |
| * the vCPU isn't running any insns and thus doesn't advance the |
| * vm_clock. |
| * |
| * An extreme solution for this problem would be to never let VCPUs |
| * sleep in icount mode if there is a pending vm_clock timer; rather |
| * time could just advance to the next vm_clock event. Instead, we |
| * do stop VCPUs and only advance vm_clock after some "real" time, |
| * (related to the time left until the next event) has passed. This |
| * rt_clock timer will do this. This avoids that the warps are too |
| * visible externally---for example, you will not be sending network |
| * packets continously instead of every 100ms. |
| */ |
| qemu_mod_timer(clock->warp_timer, vm_clock_warp_start + deadline); |
| } else { |
| qemu_notify_event(); |
| } |
| } |
| |
| QEMUTimer *qemu_new_timer(QEMUClock *clock, int scale, |
| QEMUTimerCB *cb, void *opaque) |
| { |
| QEMUTimer *ts; |
| |
| ts = qemu_mallocz(sizeof(QEMUTimer)); |
| ts->clock = clock; |
| ts->cb = cb; |
| ts->opaque = opaque; |
| ts->scale = scale; |
| return ts; |
| } |
| |
| void qemu_free_timer(QEMUTimer *ts) |
| { |
| qemu_free(ts); |
| } |
| |
| /* stop a timer, but do not dealloc it */ |
| void qemu_del_timer(QEMUTimer *ts) |
| { |
| QEMUTimer **pt, *t; |
| |
| /* NOTE: this code must be signal safe because |
| qemu_timer_expired() can be called from a signal. */ |
| pt = &active_timers[ts->clock->type]; |
| for(;;) { |
| t = *pt; |
| if (!t) |
| break; |
| if (t == ts) { |
| *pt = t->next; |
| break; |
| } |
| pt = &t->next; |
| } |
| } |
| |
| /* modify the current timer so that it will be fired when current_time |
| >= expire_time. The corresponding callback will be called. */ |
| static void qemu_mod_timer_ns(QEMUTimer *ts, int64_t expire_time) |
| { |
| QEMUTimer **pt, *t; |
| |
| qemu_del_timer(ts); |
| |
| /* add the timer in the sorted list */ |
| /* NOTE: this code must be signal safe because |
| qemu_timer_expired() can be called from a signal. */ |
| pt = &active_timers[ts->clock->type]; |
| for(;;) { |
| t = *pt; |
| if (!qemu_timer_expired_ns(t, expire_time)) { |
| break; |
| } |
| pt = &t->next; |
| } |
| ts->expire_time = expire_time; |
| ts->next = *pt; |
| *pt = ts; |
| |
| /* Rearm if necessary */ |
| if (pt == &active_timers[ts->clock->type]) { |
| if (!alarm_timer->pending) { |
| qemu_rearm_alarm_timer(alarm_timer); |
| } |
| /* Interrupt execution to force deadline recalculation. */ |
| qemu_clock_warp(ts->clock); |
| if (use_icount) { |
| qemu_notify_event(); |
| } |
| } |
| } |
| |
| /* modify the current timer so that it will be fired when current_time |
| >= expire_time. The corresponding callback will be called. */ |
| void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time) |
| { |
| qemu_mod_timer_ns(ts, expire_time * ts->scale); |
| } |
| |
| int qemu_timer_pending(QEMUTimer *ts) |
| { |
| QEMUTimer *t; |
| for(t = active_timers[ts->clock->type]; t != NULL; t = t->next) { |
| if (t == ts) |
| return 1; |
| } |
| return 0; |
| } |
| |
| int qemu_timer_expired(QEMUTimer *timer_head, int64_t current_time) |
| { |
| return qemu_timer_expired_ns(timer_head, current_time * timer_head->scale); |
| } |
| |
| static void qemu_run_timers(QEMUClock *clock) |
| { |
| QEMUTimer **ptimer_head, *ts; |
| int64_t current_time; |
| |
| if (!clock->enabled) |
| return; |
| |
| current_time = qemu_get_clock_ns(clock); |
| ptimer_head = &active_timers[clock->type]; |
| for(;;) { |
| ts = *ptimer_head; |
| if (!qemu_timer_expired_ns(ts, current_time)) { |
| break; |
| } |
| /* remove timer from the list before calling the callback */ |
| *ptimer_head = ts->next; |
| ts->next = NULL; |
| |
| /* run the callback (the timer list can be modified) */ |
| ts->cb(ts->opaque); |
| } |
| } |
| |
| int64_t qemu_get_clock(QEMUClock *clock) |
| { |
| switch(clock->type) { |
| case QEMU_CLOCK_REALTIME: |
| return get_clock() / 1000000; |
| default: |
| case QEMU_CLOCK_VIRTUAL: |
| if (use_icount) { |
| return cpu_get_icount(); |
| } else { |
| return cpu_get_clock(); |
| } |
| case QEMU_CLOCK_HOST: |
| return get_clock_realtime(); |
| } |
| } |
| |
| int64_t qemu_get_clock_ns(QEMUClock *clock) |
| { |
| switch(clock->type) { |
| case QEMU_CLOCK_REALTIME: |
| return get_clock(); |
| default: |
| case QEMU_CLOCK_VIRTUAL: |
| if (use_icount) { |
| return cpu_get_icount(); |
| } else { |
| return cpu_get_clock(); |
| } |
| case QEMU_CLOCK_HOST: |
| return get_clock_realtime(); |
| } |
| } |
| |
| void init_clocks(void) |
| { |
| rt_clock = qemu_new_clock(QEMU_CLOCK_REALTIME); |
| vm_clock = qemu_new_clock(QEMU_CLOCK_VIRTUAL); |
| host_clock = qemu_new_clock(QEMU_CLOCK_HOST); |
| |
| rtc_clock = host_clock; |
| } |
| |
| /* save a timer */ |
| void qemu_put_timer(QEMUFile *f, QEMUTimer *ts) |
| { |
| uint64_t expire_time; |
| |
| if (qemu_timer_pending(ts)) { |
| expire_time = ts->expire_time; |
| } else { |
| expire_time = -1; |
| } |
| qemu_put_be64(f, expire_time); |
| } |
| |
| void qemu_get_timer(QEMUFile *f, QEMUTimer *ts) |
| { |
| uint64_t expire_time; |
| |
| expire_time = qemu_get_be64(f); |
| if (expire_time != -1) { |
| qemu_mod_timer_ns(ts, expire_time); |
| } else { |
| qemu_del_timer(ts); |
| } |
| } |
| |
| #if 0 |
| static const VMStateDescription vmstate_timers = { |
| .name = "timer", |
| .version_id = 2, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField []) { |
| VMSTATE_INT64(cpu_ticks_offset, TimersState), |
| VMSTATE_INT64(dummy, TimersState), |
| VMSTATE_INT64_V(cpu_clock_offset, TimersState, 2), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| #endif |
| |
| void configure_icount(const char *option) |
| { |
| register_savevm("timer", 0, 2, timer_save, timer_load, &timers_state); |
| |
| if (!option) |
| return; |
| |
| #ifdef CONFIG_IOTHREAD |
| vm_clock->warp_timer = qemu_new_timer_ns(rt_clock, icount_warp_rt, NULL); |
| #endif |
| |
| if (strcmp(option, "auto") != 0) { |
| icount_time_shift = strtol(option, NULL, 0); |
| use_icount = 1; |
| return; |
| } |
| |
| use_icount = 2; |
| |
| /* 125MIPS seems a reasonable initial guess at the guest speed. |
| It will be corrected fairly quickly anyway. */ |
| icount_time_shift = 3; |
| |
| /* Have both realtime and virtual time triggers for speed adjustment. |
| The realtime trigger catches emulated time passing too slowly, |
| the virtual time trigger catches emulated time passing too fast. |
| Realtime triggers occur even when idle, so use them less frequently |
| than VM triggers. */ |
| icount_rt_timer = qemu_new_timer_ms(rt_clock, icount_adjust_rt, NULL); |
| qemu_mod_timer(icount_rt_timer, |
| qemu_get_clock_ms(rt_clock) + 1000); |
| icount_vm_timer = qemu_new_timer_ns(vm_clock, icount_adjust_vm, NULL); |
| qemu_mod_timer(icount_vm_timer, |
| qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 10); |
| } |
| |
| void qemu_run_all_timers(void) |
| { |
| alarm_timer->pending = 0; |
| |
| /* rearm timer, if not periodic */ |
| if (alarm_timer->expired) { |
| alarm_timer->expired = 0; |
| qemu_rearm_alarm_timer(alarm_timer); |
| } |
| |
| /* vm time timers */ |
| if (vm_running) { |
| qemu_run_timers(vm_clock); |
| } |
| |
| qemu_run_timers(rt_clock); |
| qemu_run_timers(host_clock); |
| } |
| |
| static int timer_alarm_pending = 1; |
| |
| int qemu_timer_alarm_pending(void) |
| { |
| int ret = timer_alarm_pending; |
| timer_alarm_pending = 0; |
| return ret; |
| } |
| |
| |
| static int64_t qemu_next_alarm_deadline(void); |
| |
| #ifdef _WIN32 |
| static void CALLBACK host_alarm_handler(PVOID lpParam, BOOLEAN unused) |
| #else |
| static void host_alarm_handler(int host_signum) |
| #endif |
| { |
| struct qemu_alarm_timer *t = alarm_timer; |
| if (!t) |
| return; |
| |
| #if 0 |
| #define DISP_FREQ 1000 |
| { |
| static int64_t delta_min = INT64_MAX; |
| static int64_t delta_max, delta_cum, last_clock, delta, ti; |
| static int count; |
| ti = qemu_get_clock_ns(vm_clock); |
| if (last_clock != 0) { |
| delta = ti - last_clock; |
| if (delta < delta_min) |
| delta_min = delta; |
| if (delta > delta_max) |
| delta_max = delta; |
| delta_cum += delta; |
| if (++count == DISP_FREQ) { |
| printf("timer: min=%" PRId64 " us max=%" PRId64 " us avg=%" PRId64 " us avg_freq=%0.3f Hz\n", |
| muldiv64(delta_min, 1000000, get_ticks_per_sec()), |
| muldiv64(delta_max, 1000000, get_ticks_per_sec()), |
| muldiv64(delta_cum, 1000000 / DISP_FREQ, get_ticks_per_sec()), |
| (double)get_ticks_per_sec() / ((double)delta_cum / DISP_FREQ)); |
| count = 0; |
| delta_min = INT64_MAX; |
| delta_max = 0; |
| delta_cum = 0; |
| } |
| } |
| last_clock = ti; |
| } |
| #endif |
| if (alarm_has_dynticks(t) || |
| qemu_next_alarm_deadline () <= 0) { |
| t->expired = alarm_has_dynticks(t); |
| t->pending = 1; |
| timer_alarm_pending = 1; |
| qemu_notify_event(); |
| } |
| } |
| |
| int64_t qemu_next_icount_deadline(void) |
| { |
| /* To avoid problems with overflow limit this to 2^32. */ |
| int64_t delta = INT32_MAX; |
| |
| assert(use_icount); |
| if (active_timers[QEMU_CLOCK_VIRTUAL]) { |
| delta = active_timers[QEMU_CLOCK_VIRTUAL]->expire_time - |
| qemu_get_clock_ns(vm_clock); |
| } |
| |
| if (delta < 0) |
| delta = 0; |
| |
| return delta; |
| } |
| |
| static int64_t qemu_next_alarm_deadline(void) |
| { |
| int64_t delta; |
| int64_t rtdelta; |
| |
| if (!use_icount && active_timers[QEMU_CLOCK_VIRTUAL]) { |
| delta = active_timers[QEMU_CLOCK_VIRTUAL]->expire_time - |
| qemu_get_clock_ns(vm_clock); |
| } else { |
| delta = INT32_MAX; |
| } |
| if (active_timers[QEMU_CLOCK_HOST]) { |
| int64_t hdelta = active_timers[QEMU_CLOCK_HOST]->expire_time - |
| qemu_get_clock_ns(host_clock); |
| if (hdelta < delta) |
| delta = hdelta; |
| } |
| if (active_timers[QEMU_CLOCK_REALTIME]) { |
| rtdelta = (active_timers[QEMU_CLOCK_REALTIME]->expire_time - |
| qemu_get_clock_ns(rt_clock)); |
| if (rtdelta < delta) |
| delta = rtdelta; |
| } |
| |
| return delta; |
| } |
| |
| #if defined(__linux__) |
| |
| #define RTC_FREQ 1024 |
| |
| static void enable_sigio_timer(int fd) |
| { |
| struct sigaction act; |
| |
| /* timer signal */ |
| sigfillset(&act.sa_mask); |
| act.sa_flags = 0; |
| act.sa_handler = host_alarm_handler; |
| |
| sigaction(SIGIO, &act, NULL); |
| fcntl_setfl(fd, O_ASYNC); |
| fcntl(fd, F_SETOWN, getpid()); |
| } |
| |
| static int hpet_start_timer(struct qemu_alarm_timer *t) |
| { |
| struct hpet_info info; |
| int r, fd; |
| |
| fd = open("/dev/hpet", O_RDONLY); |
| if (fd < 0) |
| return -1; |
| |
| /* Set frequency */ |
| r = ioctl(fd, HPET_IRQFREQ, RTC_FREQ); |
| if (r < 0) { |
| fprintf(stderr, "Could not configure '/dev/hpet' to have a 1024Hz timer. This is not a fatal\n" |
| "error, but for better emulation accuracy type:\n" |
| "'echo 1024 > /proc/sys/dev/hpet/max-user-freq' as root.\n"); |
| goto fail; |
| } |
| |
| /* Check capabilities */ |
| r = ioctl(fd, HPET_INFO, &info); |
| if (r < 0) |
| goto fail; |
| |
| /* Enable periodic mode */ |
| r = ioctl(fd, HPET_EPI, 0); |
| if (info.hi_flags && (r < 0)) |
| goto fail; |
| |
| /* Enable interrupt */ |
| r = ioctl(fd, HPET_IE_ON, 0); |
| if (r < 0) |
| goto fail; |
| |
| enable_sigio_timer(fd); |
| t->fd = fd; |
| |
| return 0; |
| fail: |
| close(fd); |
| return -1; |
| } |
| |
| static void hpet_stop_timer(struct qemu_alarm_timer *t) |
| { |
| int fd = t->fd; |
| |
| close(fd); |
| } |
| |
| static int rtc_start_timer(struct qemu_alarm_timer *t) |
| { |
| int rtc_fd; |
| unsigned long current_rtc_freq = 0; |
| |
| TFR(rtc_fd = open("/dev/rtc", O_RDONLY)); |
| if (rtc_fd < 0) |
| return -1; |
| ioctl(rtc_fd, RTC_IRQP_READ, ¤t_rtc_freq); |
| if (current_rtc_freq != RTC_FREQ && |
| ioctl(rtc_fd, RTC_IRQP_SET, RTC_FREQ) < 0) { |
| fprintf(stderr, "Could not configure '/dev/rtc' to have a 1024 Hz timer. This is not a fatal\n" |
| "error, but for better emulation accuracy either use a 2.6 host Linux kernel or\n" |
| "type 'echo 1024 > /proc/sys/dev/rtc/max-user-freq' as root.\n"); |
| goto fail; |
| } |
| if (ioctl(rtc_fd, RTC_PIE_ON, 0) < 0) { |
| fail: |
| close(rtc_fd); |
| return -1; |
| } |
| |
| enable_sigio_timer(rtc_fd); |
| |
| t->fd = rtc_fd; |
| |
| return 0; |
| } |
| |
| static void rtc_stop_timer(struct qemu_alarm_timer *t) |
| { |
| int rtc_fd = t->fd; |
| |
| close(rtc_fd); |
| } |
| |
| static int dynticks_start_timer(struct qemu_alarm_timer *t) |
| { |
| struct sigevent ev; |
| timer_t host_timer; |
| struct sigaction act; |
| |
| sigfillset(&act.sa_mask); |
| act.sa_flags = 0; |
| act.sa_handler = host_alarm_handler; |
| |
| sigaction(SIGALRM, &act, NULL); |
| |
| /* |
| * Initialize ev struct to 0 to avoid valgrind complaining |
| * about uninitialized data in timer_create call |
| */ |
| memset(&ev, 0, sizeof(ev)); |
| ev.sigev_value.sival_int = 0; |
| ev.sigev_notify = SIGEV_SIGNAL; |
| ev.sigev_signo = SIGALRM; |
| |
| if (timer_create(CLOCK_REALTIME, &ev, &host_timer)) { |
| perror("timer_create"); |
| |
| /* disable dynticks */ |
| fprintf(stderr, "Dynamic Ticks disabled\n"); |
| |
| return -1; |
| } |
| |
| t->timer = host_timer; |
| |
| return 0; |
| } |
| |
| static void dynticks_stop_timer(struct qemu_alarm_timer *t) |
| { |
| timer_t host_timer = t->timer; |
| |
| timer_delete(host_timer); |
| } |
| |
| static void dynticks_rearm_timer(struct qemu_alarm_timer *t) |
| { |
| timer_t host_timer = t->timer; |
| struct itimerspec timeout; |
| int64_t nearest_delta_ns = INT64_MAX; |
| int64_t current_ns; |
| |
| assert(alarm_has_dynticks(t)); |
| if (!active_timers[QEMU_CLOCK_REALTIME] && |
| !active_timers[QEMU_CLOCK_VIRTUAL] && |
| !active_timers[QEMU_CLOCK_HOST]) |
| return; |
| |
| nearest_delta_ns = qemu_next_alarm_deadline(); |
| if (nearest_delta_ns < MIN_TIMER_REARM_NS) |
| nearest_delta_ns = MIN_TIMER_REARM_NS; |
| |
| /* check whether a timer is already running */ |
| if (timer_gettime(host_timer, &timeout)) { |
| perror("gettime"); |
| fprintf(stderr, "Internal timer error: aborting\n"); |
| exit(1); |
| } |
| current_ns = timeout.it_value.tv_sec * 1000000000LL + timeout.it_value.tv_nsec; |
| if (current_ns && current_ns <= nearest_delta_ns) |
| return; |
| |
| timeout.it_interval.tv_sec = 0; |
| timeout.it_interval.tv_nsec = 0; /* 0 for one-shot timer */ |
| timeout.it_value.tv_sec = nearest_delta_ns / 1000000000; |
| timeout.it_value.tv_nsec = nearest_delta_ns % 1000000000; |
| if (timer_settime(host_timer, 0 /* RELATIVE */, &timeout, NULL)) { |
| perror("settime"); |
| fprintf(stderr, "Internal timer error: aborting\n"); |
| exit(1); |
| } |
| } |
| |
| #endif /* defined(__linux__) */ |
| |
| #if !defined(_WIN32) |
| |
| static int unix_start_timer(struct qemu_alarm_timer *t) |
| { |
| struct sigaction act; |
| struct itimerval itv; |
| int err; |
| |
| /* timer signal */ |
| sigfillset(&act.sa_mask); |
| act.sa_flags = 0; |
| act.sa_handler = host_alarm_handler; |
| |
| sigaction(SIGALRM, &act, NULL); |
| |
| itv.it_interval.tv_sec = 0; |
| /* for i386 kernel 2.6 to get 1 ms */ |
| itv.it_interval.tv_usec = 999; |
| itv.it_value.tv_sec = 0; |
| itv.it_value.tv_usec = 10 * 1000; |
| |
| err = setitimer(ITIMER_REAL, &itv, NULL); |
| if (err) |
| return -1; |
| |
| return 0; |
| } |
| |
| static void unix_stop_timer(struct qemu_alarm_timer *t) |
| { |
| struct itimerval itv; |
| |
| memset(&itv, 0, sizeof(itv)); |
| setitimer(ITIMER_REAL, &itv, NULL); |
| } |
| |
| #endif /* !defined(_WIN32) */ |
| |
| |
| #ifdef _WIN32 |
| |
| static MMRESULT mm_timer; |
| static unsigned mm_period; |
| |
| static void CALLBACK mm_alarm_handler(UINT uTimerID, UINT uMsg, |
| DWORD_PTR dwUser, DWORD_PTR dw1, |
| DWORD_PTR dw2) |
| { |
| struct qemu_alarm_timer *t = alarm_timer; |
| if (!t) { |
| return; |
| } |
| if (alarm_has_dynticks(t) || qemu_next_alarm_deadline() <= 0) { |
| t->expired = alarm_has_dynticks(t); |
| t->pending = 1; |
| qemu_notify_event(); |
| } |
| } |
| |
| static int mm_start_timer(struct qemu_alarm_timer *t) |
| { |
| TIMECAPS tc; |
| UINT flags; |
| |
| memset(&tc, 0, sizeof(tc)); |
| timeGetDevCaps(&tc, sizeof(tc)); |
| |
| mm_period = tc.wPeriodMin; |
| timeBeginPeriod(mm_period); |
| |
| flags = TIME_CALLBACK_FUNCTION; |
| if (alarm_has_dynticks(t)) { |
| flags |= TIME_ONESHOT; |
| } else { |
| flags |= TIME_PERIODIC; |
| } |
| |
| mm_timer = timeSetEvent(1, /* interval (ms) */ |
| mm_period, /* resolution */ |
| mm_alarm_handler, /* function */ |
| (DWORD_PTR)t, /* parameter */ |
| flags); |
| |
| if (!mm_timer) { |
| fprintf(stderr, "Failed to initialize win32 alarm timer: %ld\n", |
| GetLastError()); |
| timeEndPeriod(mm_period); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static void mm_stop_timer(struct qemu_alarm_timer *t) |
| { |
| timeKillEvent(mm_timer); |
| timeEndPeriod(mm_period); |
| } |
| |
| static void mm_rearm_timer(struct qemu_alarm_timer *t) |
| { |
| int nearest_delta_ms; |
| |
| assert(alarm_has_dynticks(t)); |
| if (!active_timers[QEMU_CLOCK_REALTIME] && |
| !active_timers[QEMU_CLOCK_VIRTUAL] && |
| !active_timers[QEMU_CLOCK_HOST]) { |
| return; |
| } |
| |
| timeKillEvent(mm_timer); |
| |
| nearest_delta_ms = (qemu_next_alarm_deadline() + 999999) / 1000000; |
| if (nearest_delta_ms < 1) { |
| nearest_delta_ms = 1; |
| } |
| mm_timer = timeSetEvent(nearest_delta_ms, |
| mm_period, |
| mm_alarm_handler, |
| (DWORD_PTR)t, |
| TIME_ONESHOT | TIME_CALLBACK_FUNCTION); |
| |
| if (!mm_timer) { |
| fprintf(stderr, "Failed to re-arm win32 alarm timer %ld\n", |
| GetLastError()); |
| |
| timeEndPeriod(mm_period); |
| exit(1); |
| } |
| } |
| |
| static int win32_start_timer(struct qemu_alarm_timer *t) |
| { |
| HANDLE hTimer; |
| BOOLEAN success; |
| |
| /* If you call ChangeTimerQueueTimer on a one-shot timer (its period |
| is zero) that has already expired, the timer is not updated. Since |
| creating a new timer is relatively expensive, set a bogus one-hour |
| interval in the dynticks case. */ |
| success = CreateTimerQueueTimer(&hTimer, |
| NULL, |
| host_alarm_handler, |
| t, |
| 1, |
| alarm_has_dynticks(t) ? 3600000 : 1, |
| WT_EXECUTEINTIMERTHREAD); |
| |
| if (!success) { |
| fprintf(stderr, "Failed to initialize win32 alarm timer: %ld\n", |
| GetLastError()); |
| return -1; |
| } |
| |
| t->timer = hTimer; |
| return 0; |
| } |
| |
| static void win32_stop_timer(struct qemu_alarm_timer *t) |
| { |
| HANDLE hTimer = t->timer; |
| |
| if (hTimer) { |
| DeleteTimerQueueTimer(NULL, hTimer, NULL); |
| } |
| } |
| |
| static void win32_rearm_timer(struct qemu_alarm_timer *t) |
| { |
| HANDLE hTimer = t->timer; |
| int nearest_delta_ms; |
| BOOLEAN success; |
| |
| assert(alarm_has_dynticks(t)); |
| if (!active_timers[QEMU_CLOCK_REALTIME] && |
| !active_timers[QEMU_CLOCK_VIRTUAL] && |
| !active_timers[QEMU_CLOCK_HOST]) |
| return; |
| |
| nearest_delta_ms = (qemu_next_alarm_deadline() + 999999) / 1000000; |
| if (nearest_delta_ms < 1) { |
| nearest_delta_ms = 1; |
| } |
| success = ChangeTimerQueueTimer(NULL, |
| hTimer, |
| nearest_delta_ms, |
| 3600000); |
| |
| if (!success) { |
| fprintf(stderr, "Failed to rearm win32 alarm timer: %ld\n", |
| GetLastError()); |
| exit(-1); |
| } |
| |
| } |
| |
| #endif /* _WIN32 */ |
| |
| static void alarm_timer_on_change_state_rearm(void *opaque, int running, int reason) |
| { |
| if (running) |
| qemu_rearm_alarm_timer((struct qemu_alarm_timer *) opaque); |
| } |
| |
| int init_timer_alarm(void) |
| { |
| struct qemu_alarm_timer *t = NULL; |
| int i, err = -1; |
| |
| for (i = 0; alarm_timers[i].name; i++) { |
| t = &alarm_timers[i]; |
| |
| err = t->start(t); |
| if (!err) |
| break; |
| } |
| |
| if (err) { |
| err = -ENOENT; |
| goto fail; |
| } |
| |
| /* first event is at time 0 */ |
| t->pending = 1; |
| alarm_timer = t; |
| qemu_add_vm_change_state_handler(alarm_timer_on_change_state_rearm, t); |
| |
| return 0; |
| |
| fail: |
| return err; |
| } |
| |
| void quit_timers(void) |
| { |
| struct qemu_alarm_timer *t = alarm_timer; |
| alarm_timer = NULL; |
| t->stop(t); |
| } |
| |
| extern int tcg_has_work(void); |
| |
| int qemu_calculate_timeout(void) |
| { |
| #ifndef CONFIG_IOTHREAD |
| int timeout; |
| |
| if (!vm_running) |
| timeout = 5000; |
| else if (tcg_has_work()) |
| timeout = 0; |
| else if (!use_icount) { |
| #ifdef WIN32 |
| /* This corresponds to the case where the emulated system is |
| * totally idle and waiting for i/o. The problem is that on |
| * Windows, the default value will prevent Windows user events |
| * to be delivered in less than 5 seconds. |
| * |
| * Upstream contains a different way to handle this, for now |
| * this hack should be sufficient until we integrate it into |
| * our tree. |
| */ |
| timeout = 1000/15; /* deliver user events every 15/th of second */ |
| #else |
| timeout = 5000; |
| #endif |
| } else { |
| /* XXX: use timeout computed from timers */ |
| int64_t add; |
| int64_t delta; |
| /* Advance virtual time to the next event. */ |
| delta = qemu_icount_delta(); |
| if (delta > 0) { |
| /* If virtual time is ahead of real time then just |
| wait for IO. */ |
| timeout = (delta + 999999) / 1000000; |
| } else { |
| /* Wait for either IO to occur or the next |
| timer event. */ |
| add = qemu_next_icount_deadline(); |
| /* We advance the timer before checking for IO. |
| Limit the amount we advance so that early IO |
| activity won't get the guest too far ahead. */ |
| if (add > 10000000) |
| add = 10000000; |
| delta += add; |
| qemu_icount += qemu_icount_round (add); |
| timeout = delta / 1000000; |
| if (timeout < 0) |
| timeout = 0; |
| } |
| } |
| |
| return timeout; |
| #else /* CONFIG_IOTHREAD */ |
| return 1000; |
| #endif |
| } |
| |
| /* Return the virtual CPU time, based on the instruction counter. */ |
| int64_t cpu_get_icount(void) |
| { |
| int64_t icount; |
| CPUState *env = cpu_single_env;; |
| |
| icount = qemu_icount; |
| if (env) { |
| if (!can_do_io(env)) { |
| fprintf(stderr, "Bad clock read\n"); |
| } |
| icount -= (env->icount_decr.u16.low + env->icount_extra); |
| } |
| return qemu_icount_bias + (icount << icount_time_shift); |
| } |