| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * Encapsulates exchange protocol between the emulator, and an Android device |
| * that is connected to the host via USB. The communication is established over |
| * a TCP port forwarding, enabled by ADB. |
| */ |
| |
| #include "android/android-device.h" |
| #include "utils/panic.h" |
| #include "iolooper.h" |
| |
| #define E(...) derror(__VA_ARGS__) |
| #define W(...) dwarning(__VA_ARGS__) |
| #define D(...) VERBOSE_PRINT(adevice,__VA_ARGS__) |
| #define D_ACTIVE VERBOSE_CHECK(adevice) |
| |
| /******************************************************************************** |
| * Common android device socket |
| *******************************************************************************/ |
| |
| /* Milliseconds between retrying asynchronous connections to the device. */ |
| #define ADS_RETRY_CONNECTION_TIMEOUT 3000 |
| |
| /* Socket type. */ |
| typedef enum ADSType { |
| /* Query socket. */ |
| ADS_TYPE_QUERY = 0, |
| /* Events socket. */ |
| ADS_TYPE_EVENT = 1 |
| } ADSType; |
| |
| /* Status of the socket. */ |
| typedef enum ADSStatus { |
| /* Socket is disconnected. */ |
| ADS_DISCONNECTED, |
| /* Connection process has been started. */ |
| ADS_CONNECTING, |
| /* Connection has been established. */ |
| ADS_CONNECTED, |
| /* Socket has been registered with the server. */ |
| ADS_REGISTERED, |
| } ADSStatus; |
| |
| /* Identifies socket as a "query" socket with the server. */ |
| static const char* _ads_query_socket_id = "query"; |
| /* Identifies socket as an "event" socket with the server. */ |
| static const char* _ads_event_socket_id = "event"; |
| |
| /* Android device socket descriptor. */ |
| typedef struct AndroidDevSocket AndroidDevSocket; |
| |
| /* |
| * Callback routines. |
| */ |
| |
| /* Callback routine that is called when a socket is connected. |
| * Param: |
| * opaque - Opaque pointer associated with the socket. Typicaly it's the same |
| * pointer that is associated with AndroidDevice instance. |
| * ads - Connection socket. |
| * failure - If zero, indicates that socket has been successuly connected. If a |
| * connection error has occured, this parameter contains the error code (as |
| * in 'errno). |
| */ |
| typedef void (*ads_socket_connected_cb)(void* opaque, |
| struct AndroidDevSocket* ads, |
| int failure); |
| |
| /* Android device socket descriptor. */ |
| struct AndroidDevSocket { |
| /* Socket type. */ |
| ADSType type; |
| /* Socket status. */ |
| ADSStatus socket_status; |
| /* TCP address for the socket. */ |
| SockAddress address; |
| /* Android device descriptor that owns the socket. */ |
| AndroidDevice* ad; |
| /* Opaque pointer associated with the socket. Typicaly it's the same |
| * pointer that is associated with AndroidDevice instance.*/ |
| void* opaque; |
| /* Deadline for current I/O performed on the socket. */ |
| Duration deadline; |
| /* Socket's file descriptor. */ |
| int fd; |
| }; |
| |
| /* Query socket descriptor. */ |
| typedef struct AndroidQuerySocket { |
| /* Common device socket. */ |
| AndroidDevSocket dev_socket; |
| } AndroidQuerySocket; |
| |
| /* Describes data to send via an asynchronous socket. */ |
| typedef struct AsyncSendBuffer { |
| /* Next buffer to send. */ |
| struct AsyncSendBuffer* next; |
| /* Callback to invoke when data transfer is completed. */ |
| async_send_cb complete_cb; |
| /* An opaque pointer to pass to the transfer completion callback. */ |
| void* complete_opaque; |
| /* Data to send. */ |
| uint8_t* data; |
| /* Size of the entire data buffer. */ |
| int data_size; |
| /* Remaining bytes to send. */ |
| int data_remaining; |
| /* Boolean flag indicating whether to free data buffer upon completion. */ |
| int free_on_completion; |
| } AsyncSendBuffer; |
| |
| /* Event socket descriptor. */ |
| typedef struct AndroidEventSocket { |
| /* Common socket descriptor. */ |
| AndroidDevSocket dev_socket; |
| /* Asynchronous connector to the device. */ |
| AsyncConnector connector[1]; |
| /* I/O port for asynchronous I/O on this socket. */ |
| LoopIo io[1]; |
| /* Asynchronous string reader. */ |
| AsyncLineReader alr; |
| /* Callback to call at the end of the asynchronous connection to this socket. |
| * Can be NULL. */ |
| ads_socket_connected_cb on_connected; |
| /* Callback to call when an event is received on this socket. Can be NULL. */ |
| event_cb on_event; |
| /* Lists buffers that are pending to be sent. */ |
| AsyncSendBuffer* send_pending; |
| } AndroidEventSocket; |
| |
| /* Android device descriptor. */ |
| struct AndroidDevice { |
| /* Query socket for the device. */ |
| AndroidQuerySocket query_socket; |
| /* Event socket for the device. */ |
| AndroidEventSocket event_socket; |
| /* An opaque pointer associated with this descriptor. */ |
| void* opaque; |
| /* I/O looper for synchronous I/O on the sockets for this device. */ |
| IoLooper* io_looper; |
| /* Timer that is used to retry asynchronous connections. */ |
| LoopTimer timer[1]; |
| /* I/O looper for asynchronous I/O. */ |
| Looper* looper; |
| /* Callback to call when device is fully connected. */ |
| device_connected_cb on_connected; |
| /* I/O failure callback .*/ |
| io_failure_cb on_io_failure; |
| }; |
| |
| /* Creates descriptor for a buffer to send asynchronously. |
| * Param: |
| * data, size - Buffer to send. |
| * free_on_close - Boolean flag indicating whether to free data buffer upon |
| * completion. |
| * cb - Callback to invoke when data transfer is completed. |
| * opaque - An opaque pointer to pass to the transfer completion callback. |
| */ |
| static AsyncSendBuffer* |
| _async_send_buffer_create(void* data, |
| int size, |
| int free_on_close, |
| async_send_cb cb, |
| void* opaque) |
| { |
| AsyncSendBuffer* desc = malloc(sizeof(AsyncSendBuffer)); |
| if (desc == NULL) { |
| APANIC("Unable to allocate %d bytes for AsyncSendBuffer", |
| sizeof(AsyncSendBuffer)); |
| } |
| desc->next = NULL; |
| desc->data = (uint8_t*)data; |
| desc->data_size = desc->data_remaining = size; |
| desc->free_on_completion = free_on_close; |
| desc->complete_cb = cb; |
| desc->complete_opaque = opaque; |
| |
| return desc; |
| } |
| |
| /* Completes data transfer for the given descriptor. |
| * Note that this routine will free the descriptor. |
| * Param: |
| * desc - Asynchronous data transfer descriptor. Will be freed upon the exit |
| * from this routine. |
| * res - Data transfer result. |
| */ |
| static void |
| _async_send_buffer_complete(AsyncSendBuffer* desc, ATResult res) |
| { |
| /* Invoke completion callback (if present) */ |
| if (desc->complete_cb) { |
| desc->complete_cb(desc->complete_opaque, res, desc->data, desc->data_size, |
| desc->data_size - desc->data_remaining); |
| } |
| |
| /* Free data buffer (if required) */ |
| if (desc->free_on_completion) { |
| free(desc->data); |
| } |
| |
| /* Free the descriptor itself. */ |
| free(desc); |
| } |
| |
| /******************************************************************************** |
| * Common socket declarations |
| *******************************************************************************/ |
| |
| /* Initializes common device socket. |
| * Param: |
| * ads - Socket descriptor to initialize. |
| * opaque - An opaque pointer to associate with the socket. Typicaly it's the |
| * same pointer that is associated with AndroidDevice instance. |
| * ad - Android device descriptor that owns the socket. |
| * port - Socket's TCP port. |
| * type - Socket type (query, or event). |
| */ |
| static int _android_dev_socket_init(AndroidDevSocket* ads, |
| void* opaque, |
| AndroidDevice* ad, |
| int port, |
| ADSType type); |
| |
| /* Destroys socket descriptor. */ |
| static void _android_dev_socket_destroy(AndroidDevSocket* ads); |
| |
| /* Synchronously connects to the socket, and registers it with the server. |
| * Param: |
| * ads - Socket to connect. Must have 'deadline' field properly setup. |
| * Return: |
| * 0 on success, -1 on failure with errno containing the reason for failure. |
| */ |
| static int _android_dev_socket_connect(AndroidDevSocket* ads); |
| |
| /* Synchronously registers a connected socket with the server. |
| * Param: |
| * ads - Socket to register. Must be connected, and must have 'deadline' field |
| * properly setup. |
| * Return: |
| * 0 on success, -1 on failure with errno containing the reason for failure. |
| */ |
| static int _android_dev_socket_register(AndroidDevSocket* ads); |
| |
| /* Disconnects the socket (if it was connected) */ |
| static void _android_dev_socket_disconnect(AndroidDevSocket* ads); |
| |
| /* Synchronously sends data to the socket. |
| * Param: |
| * ads - Socket to send the data to. Must be connected, and must have 'deadline' |
| * field properly setup. |
| * buff, buffsize - Buffer to send. |
| * Return: |
| * Number of bytes sent on success, or -1 on failure with errno containing the |
| * reason for failure. |
| */ |
| static int _android_dev_socket_send(AndroidDevSocket* ads, |
| const char* buff, |
| int buffsize); |
| |
| /* Synchronously receives data from the socket. |
| * Param: |
| * ads - Socket to receive the data from. Must be connected, and must have |
| * 'deadline' field properly setup. |
| * buff, buffsize - Buffer where to receive data. |
| * Return: |
| * Number of bytes received on success, or -1 on failure with errno containing |
| * the reason for failure. |
| */ |
| static int _android_dev_socket_recv(AndroidDevSocket* ads, |
| char* buf, |
| int bufsize); |
| |
| /* Synchronously reads zero-terminated string from the socket. |
| * Param: |
| * ads - Socket to read the string from. Must be connected, and must have |
| * 'deadline' field properly setup. |
| * str, strsize - Buffer where to read the string. |
| * Return: |
| * Number of charactes read into the string buffer (including zero-terminator) |
| * on success, or -1 on failure with 'errno' containing the reason for failure. |
| * If this routine returns -1, and errno contains ENOMEM, this is an indicator |
| * that supplied string buffer was too small for the receiving string. |
| */ |
| static int _android_dev_socket_read_string(AndroidDevSocket* ads, |
| char* str, |
| int strsize); |
| |
| /* Synchronously reads zero-terminated query response from the socket. |
| * All queries respond with an 'ok', or 'ko' prefix, indicating a success, or |
| * failure. Prefix can be followed by more query response data, separated from |
| * the prefix with a ':' character. This routine helps separating prefix from the |
| * data, by placing only the query response data into provided buffer. 'ko' or |
| * 'ok' will be encoded in the return value. |
| * Param: |
| * ads - Socket to read the response from. Must be connected, and must have |
| * 'deadline' field properly setup. |
| * data, datasize - Buffer where to read the query response data. |
| * Return: |
| * Number of charactes read into the data buffer (including zero-terminator) on |
| * success, or -1 on failure with errno containing the reason for failure. |
| * If the query has been completed with 'ko', this routine will return -1, with |
| * errno set to 0. If this routine returned -1, and errno is set to EINVAL, this |
| * indicates that reply string didn't match expected query reply format. |
| */ |
| static int _android_dev_socket_read_response(AndroidDevSocket* ads, |
| char* str, |
| int strsize); |
| |
| /* Gets ID string for the channel. */ |
| AINLINED const char* |
| _ads_id_str(AndroidDevSocket* ads) |
| { |
| return (ads->type == ADS_TYPE_QUERY) ? _ads_query_socket_id : |
| _ads_event_socket_id; |
| } |
| |
| /* Gets socket's TCP port. */ |
| AINLINED int |
| _ads_port(AndroidDevSocket* ads) |
| { |
| return sock_address_get_port(&ads->address); |
| } |
| |
| /* Gets synchronous I/O looper for the socket. */ |
| AINLINED IoLooper* |
| _ads_io_looper(AndroidDevSocket* ads) |
| { |
| return ads->ad->io_looper; |
| } |
| |
| /* Sets deadline on a socket operation, given relative timeout. |
| * Param: |
| * ads - Socket descriptor to set deadline for. |
| * to - Relative timeout (in millisec) for the operation. |
| * AD_INFINITE_WAIT passed in this parameter means "no deadline". |
| */ |
| AINLINED void |
| _ads_set_deadline(AndroidDevSocket* ads, int to) |
| { |
| ads->deadline = (to == AD_INFINITE_WAIT) ? DURATION_INFINITE : |
| iolooper_now() + to; |
| } |
| |
| /******************************************************************************** |
| * Common socket implementation |
| *******************************************************************************/ |
| |
| static int |
| _android_dev_socket_init(AndroidDevSocket* ads, |
| void* opaque, |
| AndroidDevice* ad, |
| int port, |
| ADSType type) |
| { |
| ads->type = type; |
| ads->socket_status = ADS_DISCONNECTED; |
| ads->opaque = opaque; |
| ads->ad = ad; |
| ads->fd = -1; |
| sock_address_init_inet(&ads->address, SOCK_ADDRESS_INET_LOOPBACK, port); |
| |
| return 0; |
| } |
| |
| static void |
| _android_dev_socket_destroy(AndroidDevSocket* ads) |
| { |
| /* Make sure it's disconnected. */ |
| _android_dev_socket_disconnect(ads); |
| |
| /* Finalize socket address. */ |
| sock_address_done(&ads->address); |
| memset(&ads->address, 0, sizeof(ads->address)); |
| } |
| |
| /* Event socket's asynchronous I/O looper callback. |
| * Param: |
| * opaque - AndroidEventSocket instance. |
| * fd - Socket's FD. |
| * events - I/O type bitsmask (read | write). |
| */ |
| static void _on_event_socket_io(void* opaque, int fd, unsigned events); |
| |
| static int |
| _android_dev_socket_connect(AndroidDevSocket* ads) |
| { |
| int res; |
| |
| /* Create communication socket. */ |
| ads->fd = socket_create_inet(SOCKET_STREAM); |
| if (ads->fd < 0) { |
| D("Unable to create socket for channel '%s'@%d: %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| return -1; |
| } |
| socket_set_nonblock(ads->fd); |
| |
| /* XXX: A quick fix for event channel init. Redo this later. */ |
| if (ads->type == ADS_TYPE_EVENT) { |
| AndroidEventSocket* adsevent = (AndroidEventSocket*)ads; |
| /* Prepare for async I/O on the event socket. */ |
| loopIo_init(adsevent->io, adsevent->dev_socket.ad->looper, ads->fd, |
| _on_event_socket_io, adsevent); |
| } |
| |
| /* Synchronously connect to it. */ |
| ads->socket_status = ADS_CONNECTING; |
| iolooper_add_write(_ads_io_looper(ads), ads->fd); |
| res = socket_connect(ads->fd, &ads->address); |
| while (res < 0 && errno == EINTR) { |
| res = socket_connect(ads->fd, &ads->address); |
| } |
| |
| if (res && (errno == EINPROGRESS || errno == EWOULDBLOCK || errno == EAGAIN)) { |
| /* Connection is delayed. Wait for it until timeout expires. */ |
| res = iolooper_wait_absolute(_ads_io_looper(ads), ads->deadline); |
| if (res > 0) { |
| /* Pick up on possible connection error. */ |
| errno = socket_get_error(ads->fd); |
| res = (errno == 0) ? 0 : -1; |
| } else { |
| res = -1; |
| } |
| } |
| iolooper_del_write(_ads_io_looper(ads), ads->fd); |
| |
| if (res == 0) { |
| D("Channel '%s'@%d is connected", _ads_id_str(ads), _ads_port(ads)); |
| /* Socket is connected. Now register it with the server. */ |
| ads->socket_status = ADS_CONNECTED; |
| res = _android_dev_socket_register(ads); |
| } else { |
| D("Unable to connect channel '%s' to port %d: %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| } |
| |
| if (res) { |
| _android_dev_socket_disconnect(ads); |
| } |
| |
| return res; |
| } |
| |
| static int |
| _android_dev_socket_register(AndroidDevSocket* ads) |
| { |
| /* Make sure that socket is connected. */ |
| if (ads->socket_status < ADS_CONNECTED) { |
| D("Attempt to register a disconnected channel '%s'@%d", |
| _ads_id_str(ads), _ads_port(ads)); |
| errno = ECONNRESET; |
| return -1; |
| } |
| |
| /* Register this socket accordingly to its type. */ |
| const char* reg_str = _ads_id_str(ads); |
| int res = _android_dev_socket_send(ads, reg_str, strlen(reg_str) + 1); |
| if (res > 0) { |
| /* Receive reply. Note that according to the protocol, the server should |
| * reply to channel registration with 'ok', or 'ko' (just like with queries), |
| * so we can use query reply reader here. */ |
| char reply[256]; |
| res = _android_dev_socket_read_response(ads, reply, sizeof(reply)); |
| if (res >= 0) { |
| /* Socket is now registered. */ |
| ads->socket_status = ADS_REGISTERED; |
| D("Channel '%s'@%d is registered", _ads_id_str(ads), _ads_port(ads)); |
| res = 0; |
| } else { |
| if (errno == 0) { |
| /* 'ko' condition */ |
| D("Device failed registration of channel '%s'@%d: %s", |
| _ads_id_str(ads), _ads_port(ads), reply); |
| errno = EINVAL; |
| } else { |
| D("I/O failure while registering channel '%s'@%d: %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| } |
| res = -1; |
| } |
| } else { |
| D("Unable to send registration query for channel '%s'@%d: %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| res = -1; |
| } |
| |
| return res; |
| } |
| |
| static void |
| _android_dev_socket_disconnect(AndroidDevSocket* ads) |
| { |
| /* Preserve errno */ |
| const int save_error = errno; |
| if (ads->socket_status != ADS_DISCONNECTED) { |
| /* Reset I/O looper for this socket. */ |
| iolooper_modify(_ads_io_looper(ads), ads->fd, |
| IOLOOPER_READ | IOLOOPER_WRITE, 0); |
| |
| /* Mark as disconnected. */ |
| ads->socket_status = ADS_DISCONNECTED; |
| |
| /* Close socket. */ |
| if (ads->fd >= 0) { |
| socket_close(ads->fd); |
| ads->fd = -1; |
| } |
| } |
| errno = save_error; |
| } |
| |
| static int |
| _android_dev_socket_send(AndroidDevSocket* ads, const char* buff, int to_send) |
| { |
| int sent = 0; |
| |
| /* Make sure that socket is connected. */ |
| if (ads->socket_status < ADS_CONNECTED) { |
| D("Attempt to send via disconnected channel '%s'@%d", |
| _ads_id_str(ads), _ads_port(ads)); |
| errno = ECONNRESET; |
| return -1; |
| } |
| |
| iolooper_add_write(_ads_io_looper(ads), ads->fd); |
| do { |
| int res = socket_send(ads->fd, buff + sent, to_send - sent); |
| if (res == 0) { |
| /* Disconnection. */ |
| errno = ECONNRESET; |
| sent = -1; |
| break; |
| } |
| |
| if (res < 0) { |
| if (errno == EINTR) { |
| /* loop on EINTR */ |
| continue; |
| } |
| |
| if (errno == EWOULDBLOCK || errno == EAGAIN) { |
| res = iolooper_wait_absolute(_ads_io_looper(ads), ads->deadline); |
| if (res > 0) { |
| /* Ready to write. */ |
| continue; |
| } |
| } |
| sent = -1; |
| break; |
| } |
| sent += res; |
| } while (sent < to_send); |
| iolooper_del_write(_ads_io_looper(ads), ads->fd); |
| |
| /* In case of an I/O failure we have to invoke failure callback. Note that we |
| * report I/O failures only on registered sockets. */ |
| if (sent < 0) { |
| D("I/O error while sending data via channel '%s'@%d: %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| |
| if (ads->ad->on_io_failure != NULL && ads->socket_status > ADS_CONNECTED) { |
| const char save_error = errno; |
| ads->ad->on_io_failure(ads->opaque, ads->ad, save_error); |
| errno = save_error; |
| } |
| } |
| |
| return sent; |
| } |
| |
| static int |
| _android_dev_socket_recv(AndroidDevSocket* ads, char* buf, int bufsize) |
| { |
| int recvd = 0; |
| |
| /* Make sure that socket is connected. */ |
| if (ads->socket_status < ADS_CONNECTED) { |
| D("Attempt to receive from disconnected channel '%s'@%d", |
| _ads_id_str(ads), _ads_port(ads)); |
| errno = ECONNRESET; |
| return -1; |
| } |
| |
| /* XXX: This is a hack that implements a blocked line read on an async |
| * event socket! Redo this ASAP! */ |
| if (ads->type == ADS_TYPE_EVENT) { |
| AndroidEventSocket* adsevent = (AndroidEventSocket*)ads; |
| asyncLineReader_init(&adsevent->alr, buf, bufsize, adsevent->io); |
| /* Default EOL for the line reader was '\n'. */ |
| asyncLineReader_setEOL(&adsevent->alr, '\0'); |
| AsyncStatus status = ASYNC_NEED_MORE; |
| |
| while (status == ASYNC_NEED_MORE) { |
| status = asyncLineReader_read(&adsevent->alr); |
| if (status == ASYNC_COMPLETE) { |
| recvd = adsevent->alr.pos; |
| break; |
| } else if (status == ASYNC_ERROR) { |
| if (errno == ENOMEM) { |
| recvd = adsevent->alr.pos; |
| } else { |
| recvd = -1; |
| } |
| break; |
| } |
| } |
| } else { |
| iolooper_add_read(_ads_io_looper(ads), ads->fd); |
| do { |
| int res = socket_recv(ads->fd, buf + recvd, bufsize - recvd); |
| if (res == 0) { |
| /* Disconnection. */ |
| errno = ECONNRESET; |
| recvd = -1; |
| break; |
| } |
| |
| if (res < 0) { |
| if (errno == EINTR) { |
| /* loop on EINTR */ |
| continue; |
| } |
| |
| if (errno == EWOULDBLOCK || errno == EAGAIN) { |
| res = iolooper_wait_absolute(_ads_io_looper(ads), ads->deadline); |
| if (res > 0) { |
| /* Ready to read. */ |
| continue; |
| } |
| } |
| recvd = -1; |
| break; |
| } |
| recvd += res; |
| } while (recvd < bufsize); |
| iolooper_del_read(_ads_io_looper(ads), ads->fd); |
| } |
| |
| /* In case of an I/O failure we have to invoke failure callback. Note that we |
| * report I/O failures only on registered sockets. */ |
| if (recvd < 0) { |
| D("I/O error while receiving from channel '%s'@%d: %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| |
| if (ads->ad->on_io_failure != NULL && ads->socket_status > ADS_CONNECTED) { |
| const char save_error = errno; |
| ads->ad->on_io_failure(ads->opaque, ads->ad, save_error); |
| errno = save_error; |
| } |
| } |
| |
| return recvd; |
| } |
| |
| static int |
| _android_dev_socket_read_string(AndroidDevSocket* ads, char* str, int strsize) |
| { |
| int n; |
| |
| /* Char by char read from the socket, until zero-terminator is read. */ |
| for (n = 0; n < strsize; n++) { |
| if (_android_dev_socket_recv(ads, str + n, 1) > 0) { |
| if (str[n] == '\0') { |
| /* Done. */ |
| return n + 1; /* Including zero-terminator. */ |
| } |
| } else { |
| /* I/O error. */ |
| return -1; |
| } |
| } |
| |
| /* Buffer was too small. Report that by setting errno to ENOMEM. */ |
| D("Buffer %d is too small to receive a string from channel '%s'@%d", |
| strsize, _ads_id_str(ads), _ads_port(ads)); |
| errno = ENOMEM; |
| return -1; |
| } |
| |
| static int |
| _android_dev_socket_read_response(AndroidDevSocket* ads, char* data, int datasize) |
| { |
| int n, res; |
| int success = 0; |
| int failure = 0; |
| int bad_format = 0; |
| char ok[4]; |
| |
| *data = '\0'; |
| |
| /* Char by char read from the socket, until ok/ko is read. */ |
| for (n = 0; n < 2; n++) { |
| res = _android_dev_socket_recv(ads, ok + n, 1); |
| if (res > 0) { |
| if (ok[n] == '\0') { |
| /* EOS is unexpected here! */ |
| D("Bad query reply format on channel '%s'@%d: '%s' is too short.", |
| _ads_id_str(ads), _ads_port(ads), ok); |
| errno = EINVAL; |
| return -1; |
| } |
| } else { |
| /* I/O error. */ |
| return -1; |
| } |
| } |
| |
| /* Next character must be either ':', or '\0' */ |
| res = _android_dev_socket_recv(ads, ok + n, 1); |
| if (res <= 0) { |
| /* I/O error. */ |
| return -1; |
| } |
| |
| /* |
| * Verify format. |
| */ |
| |
| /* Check ok / ko */ |
| success = memcmp(ok, "ok", 2) == 0; |
| failure = memcmp(ok, "ko", 2) == 0; |
| |
| /* Check the prefix: 'ok'|'ko' & ':'|'\0' */ |
| if ((success || failure) && (ok[n] == '\0' || ok[n] == ':')) { |
| /* Format is good. */ |
| if (ok[n] == '\0') { |
| /* We're done: no extra data in response. */ |
| errno = 0; |
| return success ? 0 : -1; |
| } |
| /* Reset buffer offset, so we will start to read the remaining query |
| * data to the beginning of the supplied buffer. */ |
| n = 0; |
| } else { |
| /* Bad format. Lets move what we've read to the main buffer, and |
| * continue filling it in. */ |
| bad_format = 1; |
| n++; |
| memcpy(data, ok, n); |
| } |
| |
| /* Read the remainder of reply to the supplied data buffer. */ |
| res = _android_dev_socket_read_string(ads, data + n, datasize - n); |
| if (res < 0) { |
| return res; |
| } |
| |
| /* Lets see if format was bad */ |
| if (bad_format) { |
| D("Bad query reply format on channel '%s'@%d: %s.", |
| _ads_id_str(ads), _ads_port(ads), data); |
| errno = EINVAL; |
| return -1; |
| } else { |
| errno = 0; |
| return success ? n : -1; |
| } |
| } |
| |
| /******************************************************************************** |
| * Query socket declarations |
| *******************************************************************************/ |
| |
| /* Initializes query socket descriptor. |
| * Param: |
| * adsquery - Socket descriptor to initialize. |
| * opaque - An opaque pointer to associate with the socket. Typicaly it's the |
| * same pointer that is associated with AndroidDevice instance. |
| * ad - Android device descriptor that owns the socket. |
| * port - TCP socket port. |
| */ |
| static int _android_query_socket_init(AndroidQuerySocket* adsquery, |
| void* opaque, |
| AndroidDevice* ad, |
| int port); |
| |
| /* Destroys query socket descriptor. */ |
| static void _android_query_socket_destroy(AndroidQuerySocket* adsquery); |
| |
| /* Synchronously connects the query socket, and registers it with the server. |
| * Param: |
| * adsquery - Descriptor for the query socket to connect. Must have 'deadline' |
| * field properly setup. |
| * cb - Callback to invoke when socket connection is completed. Can be NULL. |
| * Return: |
| * Zero on success, or non-zero on failure. |
| */ |
| static int _android_query_socket_connect(AndroidQuerySocket* adsquery); |
| |
| /* Disconnects the query socket. */ |
| static void _android_query_socket_disconnect(AndroidQuerySocket* adsquery); |
| |
| /******************************************************************************** |
| * Query socket implementation |
| *******************************************************************************/ |
| |
| static int |
| _android_query_socket_init(AndroidQuerySocket* adsquery, |
| void* opaque, |
| AndroidDevice* ad, |
| int port) |
| { |
| return _android_dev_socket_init(&adsquery->dev_socket, opaque, ad, port, |
| ADS_TYPE_QUERY); |
| } |
| |
| static void |
| _android_query_socket_destroy(AndroidQuerySocket* adsquery) |
| { |
| _android_query_socket_disconnect(adsquery); |
| _android_dev_socket_destroy(&adsquery->dev_socket); |
| } |
| |
| static int |
| _android_query_socket_connect(AndroidQuerySocket* adsquery) |
| { |
| return _android_dev_socket_connect(&adsquery->dev_socket); |
| } |
| |
| static void |
| _android_query_socket_disconnect(AndroidQuerySocket* adsquery) |
| { |
| _android_dev_socket_disconnect(&adsquery->dev_socket); |
| } |
| |
| /******************************************************************************** |
| * Events socket declarations |
| *******************************************************************************/ |
| |
| /* Initializes event socket descriptor. |
| * Param: |
| * adsevent - Socket descriptor to initialize. |
| * opaque - An opaque pointer to associate with the socket. Typicaly it's the |
| * same pointer that is associated with AndroidDevice instance. |
| * ad - Android device descriptor that owns the socket. |
| * port - TCP socket port. |
| */ |
| static int _android_event_socket_init(AndroidEventSocket* adsevent, |
| void* opaque, |
| AndroidDevice* ad, |
| int port); |
| |
| /* Destroys the event socket descriptor. */ |
| static void _android_event_socket_destroy(AndroidEventSocket* adsevent); |
| |
| /* Synchronously connects event socket. |
| * Param: |
| * adsevent - Descriptor for the event socket to connect. Must have 'deadline' |
| * field properly setup. |
| * Return: |
| * Zero on success, or non-zero on failure. |
| */ |
| static int _android_event_socket_connect_sync(AndroidEventSocket* adsevent); |
| |
| /* Initiates asynchronous event socket connection. |
| * Param: |
| * adsevent - Descriptor for the event socket to connect. Must have 'deadline' |
| * field properly setup. |
| * cb - Callback to invoke when socket connection is completed. Can be NULL. |
| * Return: |
| * Zero on success, or non-zero on failure. |
| */ |
| static int _android_event_socket_connect_async(AndroidEventSocket* adsevent, |
| ads_socket_connected_cb cb); |
| |
| /* Disconnects the event socket. */ |
| static void _android_event_socket_disconnect(AndroidEventSocket* adsevent); |
| |
| /* Initiates listening on the event socket. |
| * Param: |
| * adsevent - Descriptor for the event socket to listen on. |
| * str, strsize - Buffer where to read the string. |
| * cb - A callback to call when the event string is read. Can be NULL. |
| * Return: |
| * Zero on success, or non-zero on failure. |
| */ |
| static int _android_event_socket_listen(AndroidEventSocket* adsevent, |
| char* str, |
| int strsize, |
| event_cb cb); |
| |
| /* Asynchronously sends data via event socket. |
| * Param: |
| * adsevent - Descriptor for the event socket to send data to. |
| * data, size - Buffer containing data to send. |
| * free_on_close - A boolean flag indicating whether the data buffer should be |
| * freed upon data transfer completion. |
| * cb - Callback to invoke when data transfer is completed. |
| * opaque - An opaque pointer to pass to the transfer completion callback. |
| */ |
| static int _android_event_socket_send(AndroidEventSocket* adsevent, |
| void* data, |
| int size, |
| int free_on_close, |
| async_send_cb cb, |
| void* opaque); |
| |
| /* Cancels all asynchronous data transfers on the event socket. |
| * Param: |
| * adsevent - Descriptor for the event socket to cancel data transfer. |
| * reason - Reason for the cancellation. |
| */ |
| static void _android_event_socket_cancel_send(AndroidEventSocket* adsevent, |
| ATResult reason); |
| |
| /* Event socket's asynchronous I/O looper callback. |
| * Param: |
| * opaque - AndroidEventSocket instance. |
| * fd - Socket's FD. |
| * events - I/O type bitsmask (read | write). |
| */ |
| static void _on_event_socket_io(void* opaque, int fd, unsigned events); |
| |
| /* Callback that is invoked when asynchronous event socket connection is |
| * completed. */ |
| static void _on_event_socket_connected(AndroidEventSocket* adsevent, int failure); |
| |
| /* Callback that is invoked when an event is received from the device. */ |
| static void _on_event_received(AndroidEventSocket* adsevent); |
| |
| /* Gets I/O looper for asynchronous I/O on event socket. */ |
| AINLINED Looper* |
| _aes_looper(AndroidEventSocket* adsevent) |
| { |
| return adsevent->dev_socket.ad->looper; |
| } |
| |
| /******************************************************************************** |
| * Events socket implementation |
| *******************************************************************************/ |
| |
| static int |
| _android_event_socket_init(AndroidEventSocket* adsevent, |
| void* opaque, |
| AndroidDevice* ad, |
| int port) |
| { |
| return _android_dev_socket_init(&adsevent->dev_socket, opaque, ad, port, |
| ADS_TYPE_EVENT); |
| } |
| |
| static void |
| _android_event_socket_destroy(AndroidEventSocket* adsevent) |
| { |
| _android_event_socket_disconnect(adsevent); |
| _android_dev_socket_destroy(&adsevent->dev_socket); |
| } |
| |
| |
| static int |
| _android_event_socket_connect_sync(AndroidEventSocket* adsevent) |
| { |
| AndroidDevSocket* ads = &adsevent->dev_socket; |
| const int res = _android_dev_socket_connect(&adsevent->dev_socket); |
| /* XXX: This is patch-fixed in _android_dev_socket_connect */ |
| #if 0 |
| if (res == 0) { |
| /* Prepare for async I/O on the event socket. */ |
| loopIo_init(adsevent->io, _aes_looper(adsevent), ads->fd, |
| _on_event_socket_io, adsevent); |
| } |
| #endif |
| return res; |
| } |
| |
| static int |
| _android_event_socket_connect_async(AndroidEventSocket* adsevent, |
| ads_socket_connected_cb cb) |
| { |
| AsyncStatus status; |
| AndroidDevSocket* ads = &adsevent->dev_socket; |
| |
| /* Create asynchronous socket. */ |
| ads->fd = socket_create_inet(SOCKET_STREAM); |
| if (ads->fd < 0) { |
| D("Unable to create socket for channel '%s'@%d: %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| if (cb != NULL) { |
| cb(ads->opaque, ads, errno); |
| } |
| return -1; |
| } |
| socket_set_nonblock(ads->fd); |
| |
| /* Prepare for async I/O on the event socket. */ |
| loopIo_init(adsevent->io, _aes_looper(adsevent), ads->fd, |
| _on_event_socket_io, adsevent); |
| |
| /* Try to connect. */ |
| ads->socket_status = ADS_CONNECTING; |
| adsevent->on_connected = cb; |
| status = asyncConnector_init(adsevent->connector, &ads->address, adsevent->io); |
| switch (status) { |
| case ASYNC_COMPLETE: |
| /* We're connected to the device socket. */ |
| ads->socket_status = ADS_CONNECTED; |
| _on_event_socket_connected(adsevent, 0); |
| break; |
| case ASYNC_ERROR: |
| _on_event_socket_connected(adsevent, errno); |
| break; |
| case ASYNC_NEED_MORE: |
| /* Attempt to connect would block, so connection competion is |
| * delegates to the looper's I/O routine. */ |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| _android_event_socket_disconnect(AndroidEventSocket* adsevent) |
| { |
| AndroidDevSocket* ads = &adsevent->dev_socket; |
| |
| if (ads->socket_status != ADS_DISCONNECTED) { |
| /* Cancel data transfer. */ |
| _android_event_socket_cancel_send(adsevent, ATR_DISCONNECT); |
| |
| /* Stop all async I/O. */ |
| loopIo_done(adsevent->io); |
| |
| /* Disconnect common socket. */ |
| _android_dev_socket_disconnect(ads); |
| } |
| } |
| |
| static int |
| _android_event_socket_listen(AndroidEventSocket* adsevent, |
| char* str, |
| int strsize, |
| event_cb cb) |
| { |
| AsyncStatus status; |
| AndroidDevSocket* ads = &adsevent->dev_socket; |
| |
| /* Make sure that device is connected. */ |
| if (ads->socket_status < ADS_CONNECTED) { |
| D("Attempt to listen on a disconnected channel '%s'@%d", |
| _ads_id_str(ads), _ads_port(ads)); |
| errno = ECONNRESET; |
| return -1; |
| } |
| |
| /* NOTE: only one reader at any given time! */ |
| adsevent->on_event = cb; |
| asyncLineReader_init(&adsevent->alr, str, strsize, adsevent->io); |
| /* Default EOL for the line reader was '\n'. */ |
| asyncLineReader_setEOL(&adsevent->alr, '\0'); |
| status = asyncLineReader_read(&adsevent->alr); |
| if (status == ASYNC_COMPLETE) { |
| /* Data has been transferred immediately. Do the callback here. */ |
| _on_event_received(adsevent); |
| } else if (status == ASYNC_ERROR) { |
| D("Error while listening on channel '%s'@%d: %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| /* There is one special failure here, when buffer was too small to |
| * contain the entire string. This is not an I/O, but rather a |
| * protocol error. So we don't report it to the I/O failure |
| * callback. */ |
| if (errno == ENOMEM) { |
| _on_event_received(adsevent); |
| } else { |
| if (ads->ad->on_io_failure != NULL) { |
| ads->ad->on_io_failure(ads->ad->opaque, ads->ad, errno); |
| } |
| } |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int |
| _android_event_socket_send(AndroidEventSocket* adsevent, |
| void* data, |
| int size, |
| int free_on_close, |
| async_send_cb cb, |
| void* opaque) |
| { |
| /* Create data transfer descriptor, and place it at the end of the list. */ |
| AsyncSendBuffer* const desc = |
| _async_send_buffer_create(data, size, free_on_close, cb, opaque); |
| AsyncSendBuffer** place = &adsevent->send_pending; |
| while (*place != NULL) { |
| place = &((*place)->next); |
| } |
| *place = desc; |
| |
| /* We're ready to transfer data. */ |
| loopIo_wantWrite(adsevent->io); |
| |
| return 0; |
| } |
| |
| static void |
| _android_event_socket_cancel_send(AndroidEventSocket* adsevent, ATResult reason) |
| { |
| while (adsevent->send_pending != NULL) { |
| AsyncSendBuffer* const to_cancel = adsevent->send_pending; |
| adsevent->send_pending = to_cancel->next; |
| _async_send_buffer_complete(to_cancel, reason); |
| } |
| loopIo_dontWantWrite(adsevent->io); |
| } |
| |
| static void |
| _on_event_socket_io(void* opaque, int fd, unsigned events) |
| { |
| AsyncStatus status; |
| AndroidEventSocket* adsevent = (AndroidEventSocket*)opaque; |
| AndroidDevSocket* ads = &adsevent->dev_socket; |
| |
| /* Lets see if we're still wating on a connection to occur. */ |
| if (ads->socket_status == ADS_CONNECTING) { |
| /* Complete socket connection. */ |
| status = asyncConnector_run(adsevent->connector); |
| if (status == ASYNC_COMPLETE) { |
| /* We're connected to the device socket. */ |
| ads->socket_status = ADS_CONNECTED; |
| D("Channel '%s'@%d is connected asynchronously", |
| _ads_id_str(ads), _ads_port(ads)); |
| _on_event_socket_connected(adsevent, 0); |
| } else if (status == ASYNC_ERROR) { |
| _on_event_socket_connected(adsevent, adsevent->connector->error); |
| } |
| return; |
| } |
| |
| /* |
| * Device is connected. Continue with the data transfer. |
| */ |
| |
| if ((events & LOOP_IO_READ) != 0) { |
| /* Continue reading data. */ |
| status = asyncLineReader_read(&adsevent->alr); |
| if (status == ASYNC_COMPLETE) { |
| errno = 0; |
| _on_event_received(adsevent); |
| } else if (status == ASYNC_ERROR) { |
| D("I/O failure while reading from channel '%s'@%d: %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| /* There is one special failure here, when buffer was too small to |
| * contain the entire string. This is not an I/O, but rather a |
| * protocol error. So we don't report it to the I/O failure |
| * callback. */ |
| if (errno == ENOMEM) { |
| _on_event_received(adsevent); |
| } else { |
| if (ads->ad->on_io_failure != NULL) { |
| ads->ad->on_io_failure(ads->ad->opaque, ads->ad, errno); |
| } |
| } |
| } |
| } |
| |
| if ((events & LOOP_IO_WRITE) != 0) { |
| while (adsevent->send_pending != NULL) { |
| AsyncSendBuffer* to_send = adsevent->send_pending; |
| const int offset = to_send->data_size - to_send->data_remaining; |
| const int sent = socket_send(ads->fd, to_send->data + offset, |
| to_send->data_remaining); |
| if (sent < 0) { |
| if (errno == EWOULDBLOCK) { |
| /* Try again later. */ |
| return; |
| } else { |
| /* An error has occured. */ |
| _android_event_socket_cancel_send(adsevent, ATR_IO_ERROR); |
| if (ads->ad->on_io_failure != NULL) { |
| ads->ad->on_io_failure(ads->ad->opaque, ads->ad, errno); |
| } |
| return; |
| } |
| } else if (sent == 0) { |
| /* Disconnect condition. */ |
| _android_event_socket_cancel_send(adsevent, ATR_DISCONNECT); |
| if (ads->ad->on_io_failure != NULL) { |
| ads->ad->on_io_failure(ads->ad->opaque, ads->ad, errno); |
| } |
| return; |
| } else if (sent == to_send->data_remaining) { |
| /* All data is sent. */ |
| errno = 0; |
| adsevent->send_pending = to_send->next; |
| _async_send_buffer_complete(to_send, ATR_SUCCESS); |
| } else { |
| /* Chunk is sent. */ |
| to_send->data_remaining -= sent; |
| return; |
| } |
| } |
| loopIo_dontWantWrite(adsevent->io); |
| } |
| } |
| |
| static void |
| _on_event_socket_connected(AndroidEventSocket* adsevent, int failure) |
| { |
| int res; |
| AndroidDevSocket* ads = &adsevent->dev_socket; |
| |
| if (failure) { |
| _android_event_socket_disconnect(adsevent); |
| if (adsevent->on_connected != NULL) { |
| adsevent->on_connected(ads->opaque, ads, failure); |
| } |
| return; |
| } |
| |
| /* Complete event socket connection by identifying it as "event" socket with |
| * the application. */ |
| ads->socket_status = ADS_CONNECTED; |
| res = _android_dev_socket_register(ads); |
| |
| if (res) { |
| const int save_error = errno; |
| _android_event_socket_disconnect(adsevent); |
| errno = save_error; |
| } |
| |
| /* Notify callback about connection completion. */ |
| if (adsevent->on_connected != NULL) { |
| if (res) { |
| adsevent->on_connected(ads->opaque, ads, errno); |
| } else { |
| adsevent->on_connected(ads->opaque, ads, 0); |
| } |
| } |
| } |
| |
| static void |
| _on_event_received(AndroidEventSocket* adsevent) |
| { |
| if (adsevent->on_event != NULL) { |
| AndroidDevice* ad = adsevent->dev_socket.ad; |
| adsevent->on_event(ad->opaque, ad, (char*)adsevent->alr.buffer, |
| adsevent->alr.pos); |
| } |
| } |
| |
| /******************************************************************************** |
| * Android device connection |
| *******************************************************************************/ |
| |
| /* Callback that is invoked when event socket is connected and registered as part |
| * of the _android_device_connect_async API. |
| * Param: |
| * opaque - Opaque pointer associated with AndroidDevice instance. |
| * ads - Common socket descriptor for the event socket. |
| * failure - If zero connection has succeeded, otherwise contains 'errno'-reason |
| * for connection failure. |
| */ |
| static void |
| _on_android_device_connected_async(void* opaque, |
| AndroidDevSocket* ads, |
| int failure) |
| { |
| int res; |
| AndroidDevice* ad = ads->ad; |
| |
| if (failure) { |
| /* Depending on the failure code we will either retry, or bail out. */ |
| switch (failure) { |
| case EPIPE: |
| case EAGAIN: |
| case EINPROGRESS: |
| case EALREADY: |
| case EHOSTUNREACH: |
| case EHOSTDOWN: |
| case ECONNREFUSED: |
| case ESHUTDOWN: |
| case ENOTCONN: |
| case ECONNRESET: |
| case ECONNABORTED: |
| case ENETRESET: |
| case ENETUNREACH: |
| case ENETDOWN: |
| case EBUSY: |
| #if !defined(_DARWIN_C_SOURCE) && !defined(_WIN32) |
| case ERESTART: |
| case ECOMM: |
| case ENONET: |
| #endif /* !_DARWIN_C_SOURCE && !_WIN32 */ |
| /* Device is not available / reachable at the moment. |
| * Retry connection later. */ |
| loopTimer_startRelative(ad->timer, ADS_RETRY_CONNECTION_TIMEOUT); |
| return; |
| default: |
| D("Failed to asynchronously connect channel '%s':%d %s", |
| _ads_id_str(ads), _ads_port(ads), strerror(errno)); |
| if (ad->on_connected != NULL) { |
| ad->on_connected(ad->opaque, ad, failure); |
| } |
| break; |
| } |
| return; |
| } |
| |
| /* Event socket is connected. Connect the query socket now. Give it 5 |
| * seconds to connect. */ |
| _ads_set_deadline(&ad->query_socket.dev_socket, 5000); |
| res = _android_query_socket_connect(&ad->query_socket); |
| if (res == 0) { |
| /* Query socket is connected. */ |
| if (ad->on_connected != NULL) { |
| ad->on_connected(ad->opaque, ad, 0); |
| } |
| } else { |
| /* If connection completion has failed - disconnect the sockets. */ |
| _android_event_socket_disconnect(&ad->event_socket); |
| _android_query_socket_disconnect(&ad->query_socket); |
| |
| if (ad->on_connected != NULL) { |
| ad->on_connected(ad->opaque, ad, errno); |
| } |
| } |
| } |
| |
| static void |
| _on_timer(void* opaque) |
| { |
| /* Retry the connection. */ |
| AndroidDevice* ad = (AndroidDevice*)opaque; |
| android_device_connect_async(ad, ad->on_connected); |
| } |
| |
| /* Destroys and frees the descriptor. */ |
| static void |
| _android_device_free(AndroidDevice* ad) |
| { |
| if (ad != NULL) { |
| _android_event_socket_destroy(&ad->event_socket); |
| _android_query_socket_destroy(&ad->query_socket); |
| |
| /* Delete asynchronous I/O looper. */ |
| if (ad->looper != NULL ) { |
| loopTimer_done(ad->timer); |
| looper_free(ad->looper); |
| } |
| |
| /* Delete synchronous I/O looper. */ |
| if (ad->io_looper != NULL) { |
| iolooper_reset(ad->io_looper); |
| iolooper_free(ad->io_looper); |
| } |
| |
| AFREE(ad); |
| } |
| } |
| |
| /******************************************************************************** |
| * Android device API |
| *******************************************************************************/ |
| |
| AndroidDevice* |
| android_device_init(void* opaque, int port, io_failure_cb on_io_failure) |
| { |
| int res; |
| AndroidDevice* ad; |
| |
| ANEW0(ad); |
| |
| ad->opaque = opaque; |
| ad->on_io_failure = on_io_failure; |
| |
| /* Create I/O looper for synchronous I/O on the device. */ |
| ad->io_looper = iolooper_new(); |
| if (ad->io_looper == NULL) { |
| E("Unable to create synchronous I/O looper for android device."); |
| _android_device_free(ad); |
| return NULL; |
| } |
| |
| /* Create a looper for asynchronous I/O on the device. */ |
| ad->looper = looper_newCore(); |
| if (ad->looper != NULL) { |
| /* Create a timer that will be used for connection retries. */ |
| loopTimer_init(ad->timer, ad->looper, _on_timer, ad); |
| } else { |
| E("Unable to create asynchronous I/O looper for android device."); |
| _android_device_free(ad); |
| return NULL; |
| } |
| |
| /* Init query socket. */ |
| res = _android_query_socket_init(&ad->query_socket, opaque, ad, port); |
| if (res) { |
| _android_device_free(ad); |
| return NULL; |
| } |
| |
| /* Init event socket. */ |
| res = _android_event_socket_init(&ad->event_socket, opaque, ad, port); |
| if (res) { |
| _android_device_free(ad); |
| return NULL; |
| } |
| |
| return ad; |
| } |
| |
| void |
| android_device_destroy(AndroidDevice* ad) |
| { |
| if (ad != NULL) { |
| _android_device_free(ad); |
| } |
| } |
| |
| int |
| android_device_connect_sync(AndroidDevice* ad, int to) |
| { |
| int res; |
| |
| /* Setup deadline for the connections. */ |
| _ads_set_deadline(&ad->query_socket.dev_socket, to); |
| ad->event_socket.dev_socket.deadline = ad->query_socket.dev_socket.deadline; |
| |
| /* Connect the query socket first. */ |
| res = _android_query_socket_connect(&ad->query_socket); |
| if (!res) { |
| /* Connect to the event socket next. */ |
| res = _android_event_socket_connect_sync(&ad->event_socket); |
| } |
| |
| return res; |
| } |
| |
| int |
| android_device_connect_async(AndroidDevice* ad, device_connected_cb on_connected) |
| { |
| /* No deadline for async connections. */ |
| ad->query_socket.dev_socket.deadline = DURATION_INFINITE; |
| ad->event_socket.dev_socket.deadline = DURATION_INFINITE; |
| |
| /* Connect to the event socket first, and delegate query socket connection |
| * into callback invoked when event socket is connected. NOTE: In case of |
| * failure 'on_connected' callback has already been called from |
| * _on_android_device_connected_async routine. */ |
| ad->on_connected = on_connected; |
| return _android_event_socket_connect_async(&ad->event_socket, |
| _on_android_device_connected_async); |
| } |
| |
| void |
| android_device_disconnect(AndroidDevice* ad) |
| { |
| _android_event_socket_disconnect(&ad->event_socket); |
| _android_query_socket_disconnect(&ad->query_socket); |
| } |
| |
| int |
| android_device_query(AndroidDevice* ad, |
| const char* query, |
| char* buff, |
| size_t buffsize, |
| int to) |
| { |
| int res; |
| |
| /* Setup deadline for the query. */ |
| _ads_set_deadline(&ad->query_socket.dev_socket, to); |
| |
| /* Send the query. */ |
| res = _android_dev_socket_send(&ad->query_socket.dev_socket, query, |
| strlen(query) + 1); |
| if (res > 0) { |
| /* Receive the response. */ |
| res = _android_dev_socket_read_response(&ad->query_socket.dev_socket, |
| buff, buffsize); |
| return (res >= 0) ? 0 : -1; |
| } |
| |
| return -1; |
| } |
| |
| int |
| android_device_start_query(AndroidDevice* ad, const char* query, int to) |
| { |
| int res; |
| |
| /* Setup deadline for the query. */ |
| _ads_set_deadline(&ad->query_socket.dev_socket, to); |
| |
| /* Send the query header. */ |
| res = _android_dev_socket_send(&ad->query_socket.dev_socket, query, |
| strlen(query) + 1); |
| return (res > 0) ? 0 : -1; |
| } |
| |
| int |
| android_device_send_query_data(AndroidDevice* ad, const void* data, int size) |
| { |
| return _android_dev_socket_send(&ad->query_socket.dev_socket, data, size); |
| } |
| |
| int |
| android_device_complete_query(AndroidDevice* ad, char* buff, size_t buffsize) |
| { |
| /* Receive the response to the query. */ |
| const int res = _android_dev_socket_read_response(&ad->query_socket.dev_socket, |
| buff, buffsize); |
| return (res >= 0) ? 0 : -1; |
| } |
| |
| int |
| android_device_listen(AndroidDevice* ad, |
| char* buff, |
| int buffsize, |
| event_cb on_event) |
| { |
| return _android_event_socket_listen(&ad->event_socket, buff, buffsize, |
| on_event); |
| } |
| |
| int |
| android_device_send_async(AndroidDevice* ad, |
| void* data, |
| int size, |
| int free_on_close, |
| async_send_cb cb, |
| void* opaque) |
| { |
| return _android_event_socket_send(&ad->event_socket, data, size, |
| free_on_close, cb, opaque); |
| } |
