blob: 3c9e9f90f0ed94b63ee475b09ffc83d2c88c9b90 [file] [log] [blame]
/* libs/graphics/sgl/SkGeometry.cpp
**
** Copyright 2006, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
#include "SkGeometry.h"
#include "Sk64.h"
#include "SkMatrix.h"
bool SkXRayCrossesLine(const SkXRay& pt, const SkPoint pts[2], bool* ambiguous) {
if (ambiguous) {
*ambiguous = false;
}
// Determine quick discards.
// Consider query line going exactly through point 0 to not
// intersect, for symmetry with SkXRayCrossesMonotonicCubic.
if (pt.fY == pts[0].fY) {
if (ambiguous) {
*ambiguous = true;
}
return false;
}
if (pt.fY < pts[0].fY && pt.fY < pts[1].fY)
return false;
if (pt.fY > pts[0].fY && pt.fY > pts[1].fY)
return false;
if (pt.fX > pts[0].fX && pt.fX > pts[1].fX)
return false;
// Determine degenerate cases
if (SkScalarNearlyZero(pts[0].fY - pts[1].fY))
return false;
if (SkScalarNearlyZero(pts[0].fX - pts[1].fX)) {
// We've already determined the query point lies within the
// vertical range of the line segment.
if (pt.fX <= pts[0].fX) {
if (ambiguous) {
*ambiguous = (pt.fY == pts[1].fY);
}
return true;
}
return false;
}
// Ambiguity check
if (pt.fY == pts[1].fY) {
if (pt.fX <= pts[1].fX) {
if (ambiguous) {
*ambiguous = true;
}
return true;
}
return false;
}
// Full line segment evaluation
SkScalar delta_y = pts[1].fY - pts[0].fY;
SkScalar delta_x = pts[1].fX - pts[0].fX;
SkScalar slope = SkScalarDiv(delta_y, delta_x);
SkScalar b = pts[0].fY - SkScalarMul(slope, pts[0].fX);
// Solve for x coordinate at y = pt.fY
SkScalar x = SkScalarDiv(pt.fY - b, slope);
return pt.fX <= x;
}
/** If defined, this makes eval_quad and eval_cubic do more setup (sometimes
involving integer multiplies by 2 or 3, but fewer calls to SkScalarMul.
May also introduce overflow of fixed when we compute our setup.
*/
#ifdef SK_SCALAR_IS_FIXED
#define DIRECT_EVAL_OF_POLYNOMIALS
#endif
////////////////////////////////////////////////////////////////////////
#ifdef SK_SCALAR_IS_FIXED
static int is_not_monotonic(int a, int b, int c, int d)
{
return (((a - b) | (b - c) | (c - d)) & ((b - a) | (c - b) | (d - c))) >> 31;
}
static int is_not_monotonic(int a, int b, int c)
{
return (((a - b) | (b - c)) & ((b - a) | (c - b))) >> 31;
}
#else
static int is_not_monotonic(float a, float b, float c)
{
float ab = a - b;
float bc = b - c;
if (ab < 0)
bc = -bc;
return ab == 0 || bc < 0;
}
#endif
////////////////////////////////////////////////////////////////////////
static bool is_unit_interval(SkScalar x)
{
return x > 0 && x < SK_Scalar1;
}
static int valid_unit_divide(SkScalar numer, SkScalar denom, SkScalar* ratio)
{
SkASSERT(ratio);
if (numer < 0)
{
numer = -numer;
denom = -denom;
}
if (denom == 0 || numer == 0 || numer >= denom)
return 0;
SkScalar r = SkScalarDiv(numer, denom);
if (SkScalarIsNaN(r)) {
return 0;
}
SkASSERT(r >= 0 && r < SK_Scalar1);
if (r == 0) // catch underflow if numer <<<< denom
return 0;
*ratio = r;
return 1;
}
/** From Numerical Recipes in C.
Q = -1/2 (B + sign(B) sqrt[B*B - 4*A*C])
x1 = Q / A
x2 = C / Q
*/
int SkFindUnitQuadRoots(SkScalar A, SkScalar B, SkScalar C, SkScalar roots[2])
{
SkASSERT(roots);
if (A == 0)
return valid_unit_divide(-C, B, roots);
SkScalar* r = roots;
#ifdef SK_SCALAR_IS_FLOAT
float R = B*B - 4*A*C;
if (R < 0 || SkScalarIsNaN(R)) { // complex roots
return 0;
}
R = sk_float_sqrt(R);
#else
Sk64 RR, tmp;
RR.setMul(B,B);
tmp.setMul(A,C);
tmp.shiftLeft(2);
RR.sub(tmp);
if (RR.isNeg())
return 0;
SkFixed R = RR.getSqrt();
#endif
SkScalar Q = (B < 0) ? -(B-R)/2 : -(B+R)/2;
r += valid_unit_divide(Q, A, r);
r += valid_unit_divide(C, Q, r);
if (r - roots == 2)
{
if (roots[0] > roots[1])
SkTSwap<SkScalar>(roots[0], roots[1]);
else if (roots[0] == roots[1]) // nearly-equal?
r -= 1; // skip the double root
}
return (int)(r - roots);
}
#ifdef SK_SCALAR_IS_FIXED
/** Trim A/B/C down so that they are all <= 32bits
and then call SkFindUnitQuadRoots()
*/
static int Sk64FindFixedQuadRoots(const Sk64& A, const Sk64& B, const Sk64& C, SkFixed roots[2])
{
int na = A.shiftToMake32();
int nb = B.shiftToMake32();
int nc = C.shiftToMake32();
int shift = SkMax32(na, SkMax32(nb, nc));
SkASSERT(shift >= 0);
return SkFindUnitQuadRoots(A.getShiftRight(shift), B.getShiftRight(shift), C.getShiftRight(shift), roots);
}
#endif
/////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////
static SkScalar eval_quad(const SkScalar src[], SkScalar t)
{
SkASSERT(src);
SkASSERT(t >= 0 && t <= SK_Scalar1);
#ifdef DIRECT_EVAL_OF_POLYNOMIALS
SkScalar C = src[0];
SkScalar A = src[4] - 2 * src[2] + C;
SkScalar B = 2 * (src[2] - C);
return SkScalarMulAdd(SkScalarMulAdd(A, t, B), t, C);
#else
SkScalar ab = SkScalarInterp(src[0], src[2], t);
SkScalar bc = SkScalarInterp(src[2], src[4], t);
return SkScalarInterp(ab, bc, t);
#endif
}
static SkScalar eval_quad_derivative(const SkScalar src[], SkScalar t)
{
SkScalar A = src[4] - 2 * src[2] + src[0];
SkScalar B = src[2] - src[0];
return 2 * SkScalarMulAdd(A, t, B);
}
static SkScalar eval_quad_derivative_at_half(const SkScalar src[])
{
SkScalar A = src[4] - 2 * src[2] + src[0];
SkScalar B = src[2] - src[0];
return A + 2 * B;
}
void SkEvalQuadAt(const SkPoint src[3], SkScalar t, SkPoint* pt, SkVector* tangent)
{
SkASSERT(src);
SkASSERT(t >= 0 && t <= SK_Scalar1);
if (pt)
pt->set(eval_quad(&src[0].fX, t), eval_quad(&src[0].fY, t));
if (tangent)
tangent->set(eval_quad_derivative(&src[0].fX, t),
eval_quad_derivative(&src[0].fY, t));
}
void SkEvalQuadAtHalf(const SkPoint src[3], SkPoint* pt, SkVector* tangent)
{
SkASSERT(src);
if (pt)
{
SkScalar x01 = SkScalarAve(src[0].fX, src[1].fX);
SkScalar y01 = SkScalarAve(src[0].fY, src[1].fY);
SkScalar x12 = SkScalarAve(src[1].fX, src[2].fX);
SkScalar y12 = SkScalarAve(src[1].fY, src[2].fY);
pt->set(SkScalarAve(x01, x12), SkScalarAve(y01, y12));
}
if (tangent)
tangent->set(eval_quad_derivative_at_half(&src[0].fX),
eval_quad_derivative_at_half(&src[0].fY));
}
static void interp_quad_coords(const SkScalar* src, SkScalar* dst, SkScalar t)
{
SkScalar ab = SkScalarInterp(src[0], src[2], t);
SkScalar bc = SkScalarInterp(src[2], src[4], t);
dst[0] = src[0];
dst[2] = ab;
dst[4] = SkScalarInterp(ab, bc, t);
dst[6] = bc;
dst[8] = src[4];
}
void SkChopQuadAt(const SkPoint src[3], SkPoint dst[5], SkScalar t)
{
SkASSERT(t > 0 && t < SK_Scalar1);
interp_quad_coords(&src[0].fX, &dst[0].fX, t);
interp_quad_coords(&src[0].fY, &dst[0].fY, t);
}
void SkChopQuadAtHalf(const SkPoint src[3], SkPoint dst[5])
{
SkScalar x01 = SkScalarAve(src[0].fX, src[1].fX);
SkScalar y01 = SkScalarAve(src[0].fY, src[1].fY);
SkScalar x12 = SkScalarAve(src[1].fX, src[2].fX);
SkScalar y12 = SkScalarAve(src[1].fY, src[2].fY);
dst[0] = src[0];
dst[1].set(x01, y01);
dst[2].set(SkScalarAve(x01, x12), SkScalarAve(y01, y12));
dst[3].set(x12, y12);
dst[4] = src[2];
}
/** Quad'(t) = At + B, where
A = 2(a - 2b + c)
B = 2(b - a)
Solve for t, only if it fits between 0 < t < 1
*/
int SkFindQuadExtrema(SkScalar a, SkScalar b, SkScalar c, SkScalar tValue[1])
{
/* At + B == 0
t = -B / A
*/
#ifdef SK_SCALAR_IS_FIXED
return is_not_monotonic(a, b, c) && valid_unit_divide(a - b, a - b - b + c, tValue);
#else
return valid_unit_divide(a - b, a - b - b + c, tValue);
#endif
}
static inline void flatten_double_quad_extrema(SkScalar coords[14])
{
coords[2] = coords[6] = coords[4];
}
/* Returns 0 for 1 quad, and 1 for two quads, either way the answer is
stored in dst[]. Guarantees that the 1/2 quads will be monotonic.
*/
int SkChopQuadAtYExtrema(const SkPoint src[3], SkPoint dst[5])
{
SkASSERT(src);
SkASSERT(dst);
#if 0
static bool once = true;
if (once)
{
once = false;
SkPoint s[3] = { 0, 26398, 0, 26331, 0, 20621428 };
SkPoint d[6];
int n = SkChopQuadAtYExtrema(s, d);
SkDebugf("chop=%d, Y=[%x %x %x %x %x %x]\n", n, d[0].fY, d[1].fY, d[2].fY, d[3].fY, d[4].fY, d[5].fY);
}
#endif
SkScalar a = src[0].fY;
SkScalar b = src[1].fY;
SkScalar c = src[2].fY;
if (is_not_monotonic(a, b, c))
{
SkScalar tValue;
if (valid_unit_divide(a - b, a - b - b + c, &tValue))
{
SkChopQuadAt(src, dst, tValue);
flatten_double_quad_extrema(&dst[0].fY);
return 1;
}
// if we get here, we need to force dst to be monotonic, even though
// we couldn't compute a unit_divide value (probably underflow).
b = SkScalarAbs(a - b) < SkScalarAbs(b - c) ? a : c;
}
dst[0].set(src[0].fX, a);
dst[1].set(src[1].fX, b);
dst[2].set(src[2].fX, c);
return 0;
}
/* Returns 0 for 1 quad, and 1 for two quads, either way the answer is
stored in dst[]. Guarantees that the 1/2 quads will be monotonic.
*/
int SkChopQuadAtXExtrema(const SkPoint src[3], SkPoint dst[5])
{
SkASSERT(src);
SkASSERT(dst);
SkScalar a = src[0].fX;
SkScalar b = src[1].fX;
SkScalar c = src[2].fX;
if (is_not_monotonic(a, b, c)) {
SkScalar tValue;
if (valid_unit_divide(a - b, a - b - b + c, &tValue)) {
SkChopQuadAt(src, dst, tValue);
flatten_double_quad_extrema(&dst[0].fX);
return 1;
}
// if we get here, we need to force dst to be monotonic, even though
// we couldn't compute a unit_divide value (probably underflow).
b = SkScalarAbs(a - b) < SkScalarAbs(b - c) ? a : c;
}
dst[0].set(a, src[0].fY);
dst[1].set(b, src[1].fY);
dst[2].set(c, src[2].fY);
return 0;
}
// F(t) = a (1 - t) ^ 2 + 2 b t (1 - t) + c t ^ 2
// F'(t) = 2 (b - a) + 2 (a - 2b + c) t
// F''(t) = 2 (a - 2b + c)
//
// A = 2 (b - a)
// B = 2 (a - 2b + c)
//
// Maximum curvature for a quadratic means solving
// Fx' Fx'' + Fy' Fy'' = 0
//
// t = - (Ax Bx + Ay By) / (Bx ^ 2 + By ^ 2)
//
int SkChopQuadAtMaxCurvature(const SkPoint src[3], SkPoint dst[5])
{
SkScalar Ax = src[1].fX - src[0].fX;
SkScalar Ay = src[1].fY - src[0].fY;
SkScalar Bx = src[0].fX - src[1].fX - src[1].fX + src[2].fX;
SkScalar By = src[0].fY - src[1].fY - src[1].fY + src[2].fY;
SkScalar t = 0; // 0 means don't chop
#ifdef SK_SCALAR_IS_FLOAT
(void)valid_unit_divide(-(Ax * Bx + Ay * By), Bx * Bx + By * By, &t);
#else
// !!! should I use SkFloat here? seems like it
Sk64 numer, denom, tmp;
numer.setMul(Ax, -Bx);
tmp.setMul(Ay, -By);
numer.add(tmp);
if (numer.isPos()) // do nothing if numer <= 0
{
denom.setMul(Bx, Bx);
tmp.setMul(By, By);
denom.add(tmp);
SkASSERT(!denom.isNeg());
if (numer < denom)
{
t = numer.getFixedDiv(denom);
SkASSERT(t >= 0 && t <= SK_Fixed1); // assert that we're numerically stable (ha!)
if ((unsigned)t >= SK_Fixed1) // runtime check for numerical stability
t = 0; // ignore the chop
}
}
#endif
if (t == 0)
{
memcpy(dst, src, 3 * sizeof(SkPoint));
return 1;
}
else
{
SkChopQuadAt(src, dst, t);
return 2;
}
}
void SkConvertQuadToCubic(const SkPoint src[3], SkPoint dst[4])
{
SkScalar two = SkIntToScalar(2);
SkScalar one_third = SkScalarDiv(SK_Scalar1, SkIntToScalar(3));
dst[0].set(src[0].fX, src[0].fY);
dst[1].set(
SkScalarMul(SkScalarMulAdd(src[1].fX, two, src[0].fX), one_third),
SkScalarMul(SkScalarMulAdd(src[1].fY, two, src[0].fY), one_third));
dst[2].set(
SkScalarMul(SkScalarMulAdd(src[1].fX, two, src[2].fX), one_third),
SkScalarMul(SkScalarMulAdd(src[1].fY, two, src[2].fY), one_third));
dst[3].set(src[2].fX, src[2].fY);
}
////////////////////////////////////////////////////////////////////////////////////////
///// CUBICS // CUBICS // CUBICS // CUBICS // CUBICS // CUBICS // CUBICS // CUBICS /////
////////////////////////////////////////////////////////////////////////////////////////
static void get_cubic_coeff(const SkScalar pt[], SkScalar coeff[4])
{
coeff[0] = pt[6] + 3*(pt[2] - pt[4]) - pt[0];
coeff[1] = 3*(pt[4] - pt[2] - pt[2] + pt[0]);
coeff[2] = 3*(pt[2] - pt[0]);
coeff[3] = pt[0];
}
void SkGetCubicCoeff(const SkPoint pts[4], SkScalar cx[4], SkScalar cy[4])
{
SkASSERT(pts);
if (cx)
get_cubic_coeff(&pts[0].fX, cx);
if (cy)
get_cubic_coeff(&pts[0].fY, cy);
}
static SkScalar eval_cubic(const SkScalar src[], SkScalar t)
{
SkASSERT(src);
SkASSERT(t >= 0 && t <= SK_Scalar1);
if (t == 0)
return src[0];
#ifdef DIRECT_EVAL_OF_POLYNOMIALS
SkScalar D = src[0];
SkScalar A = src[6] + 3*(src[2] - src[4]) - D;
SkScalar B = 3*(src[4] - src[2] - src[2] + D);
SkScalar C = 3*(src[2] - D);
return SkScalarMulAdd(SkScalarMulAdd(SkScalarMulAdd(A, t, B), t, C), t, D);
#else
SkScalar ab = SkScalarInterp(src[0], src[2], t);
SkScalar bc = SkScalarInterp(src[2], src[4], t);
SkScalar cd = SkScalarInterp(src[4], src[6], t);
SkScalar abc = SkScalarInterp(ab, bc, t);
SkScalar bcd = SkScalarInterp(bc, cd, t);
return SkScalarInterp(abc, bcd, t);
#endif
}
/** return At^2 + Bt + C
*/
static SkScalar eval_quadratic(SkScalar A, SkScalar B, SkScalar C, SkScalar t)
{
SkASSERT(t >= 0 && t <= SK_Scalar1);
return SkScalarMulAdd(SkScalarMulAdd(A, t, B), t, C);
}
static SkScalar eval_cubic_derivative(const SkScalar src[], SkScalar t)
{
SkScalar A = src[6] + 3*(src[2] - src[4]) - src[0];
SkScalar B = 2*(src[4] - 2 * src[2] + src[0]);
SkScalar C = src[2] - src[0];
return eval_quadratic(A, B, C, t);
}
static SkScalar eval_cubic_2ndDerivative(const SkScalar src[], SkScalar t)
{
SkScalar A = src[6] + 3*(src[2] - src[4]) - src[0];
SkScalar B = src[4] - 2 * src[2] + src[0];
return SkScalarMulAdd(A, t, B);
}
void SkEvalCubicAt(const SkPoint src[4], SkScalar t, SkPoint* loc, SkVector* tangent, SkVector* curvature)
{
SkASSERT(src);
SkASSERT(t >= 0 && t <= SK_Scalar1);
if (loc)
loc->set(eval_cubic(&src[0].fX, t), eval_cubic(&src[0].fY, t));
if (tangent)
tangent->set(eval_cubic_derivative(&src[0].fX, t),
eval_cubic_derivative(&src[0].fY, t));
if (curvature)
curvature->set(eval_cubic_2ndDerivative(&src[0].fX, t),
eval_cubic_2ndDerivative(&src[0].fY, t));
}
/** Cubic'(t) = At^2 + Bt + C, where
A = 3(-a + 3(b - c) + d)
B = 6(a - 2b + c)
C = 3(b - a)
Solve for t, keeping only those that fit betwee 0 < t < 1
*/
int SkFindCubicExtrema(SkScalar a, SkScalar b, SkScalar c, SkScalar d, SkScalar tValues[2])
{
#ifdef SK_SCALAR_IS_FIXED
if (!is_not_monotonic(a, b, c, d))
return 0;
#endif
// we divide A,B,C by 3 to simplify
SkScalar A = d - a + 3*(b - c);
SkScalar B = 2*(a - b - b + c);
SkScalar C = b - a;
return SkFindUnitQuadRoots(A, B, C, tValues);
}
static void interp_cubic_coords(const SkScalar* src, SkScalar* dst, SkScalar t)
{
SkScalar ab = SkScalarInterp(src[0], src[2], t);
SkScalar bc = SkScalarInterp(src[2], src[4], t);
SkScalar cd = SkScalarInterp(src[4], src[6], t);
SkScalar abc = SkScalarInterp(ab, bc, t);
SkScalar bcd = SkScalarInterp(bc, cd, t);
SkScalar abcd = SkScalarInterp(abc, bcd, t);
dst[0] = src[0];
dst[2] = ab;
dst[4] = abc;
dst[6] = abcd;
dst[8] = bcd;
dst[10] = cd;
dst[12] = src[6];
}
void SkChopCubicAt(const SkPoint src[4], SkPoint dst[7], SkScalar t)
{
SkASSERT(t > 0 && t < SK_Scalar1);
interp_cubic_coords(&src[0].fX, &dst[0].fX, t);
interp_cubic_coords(&src[0].fY, &dst[0].fY, t);
}
/* http://code.google.com/p/skia/issues/detail?id=32
This test code would fail when we didn't check the return result of
valid_unit_divide in SkChopCubicAt(... tValues[], int roots). The reason is
that after the first chop, the parameters to valid_unit_divide are equal
(thanks to finite float precision and rounding in the subtracts). Thus
even though the 2nd tValue looks < 1.0, after we renormalize it, we end
up with 1.0, hence the need to check and just return the last cubic as
a degenerate clump of 4 points in the sampe place.
static void test_cubic() {
SkPoint src[4] = {
{ 556.25000, 523.03003 },
{ 556.23999, 522.96002 },
{ 556.21997, 522.89001 },
{ 556.21997, 522.82001 }
};
SkPoint dst[10];
SkScalar tval[] = { 0.33333334f, 0.99999994f };
SkChopCubicAt(src, dst, tval, 2);
}
*/
void SkChopCubicAt(const SkPoint src[4], SkPoint dst[], const SkScalar tValues[], int roots)
{
#ifdef SK_DEBUG
{
for (int i = 0; i < roots - 1; i++)
{
SkASSERT(is_unit_interval(tValues[i]));
SkASSERT(is_unit_interval(tValues[i+1]));
SkASSERT(tValues[i] < tValues[i+1]);
}
}
#endif
if (dst)
{
if (roots == 0) // nothing to chop
memcpy(dst, src, 4*sizeof(SkPoint));
else
{
SkScalar t = tValues[0];
SkPoint tmp[4];
for (int i = 0; i < roots; i++)
{
SkChopCubicAt(src, dst, t);
if (i == roots - 1)
break;
dst += 3;
// have src point to the remaining cubic (after the chop)
memcpy(tmp, dst, 4 * sizeof(SkPoint));
src = tmp;
// watch out in case the renormalized t isn't in range
if (!valid_unit_divide(tValues[i+1] - tValues[i],
SK_Scalar1 - tValues[i], &t)) {
// if we can't, just create a degenerate cubic
dst[4] = dst[5] = dst[6] = src[3];
break;
}
}
}
}
}
void SkChopCubicAtHalf(const SkPoint src[4], SkPoint dst[7])
{
SkScalar x01 = SkScalarAve(src[0].fX, src[1].fX);
SkScalar y01 = SkScalarAve(src[0].fY, src[1].fY);
SkScalar x12 = SkScalarAve(src[1].fX, src[2].fX);
SkScalar y12 = SkScalarAve(src[1].fY, src[2].fY);
SkScalar x23 = SkScalarAve(src[2].fX, src[3].fX);
SkScalar y23 = SkScalarAve(src[2].fY, src[3].fY);
SkScalar x012 = SkScalarAve(x01, x12);
SkScalar y012 = SkScalarAve(y01, y12);
SkScalar x123 = SkScalarAve(x12, x23);
SkScalar y123 = SkScalarAve(y12, y23);
dst[0] = src[0];
dst[1].set(x01, y01);
dst[2].set(x012, y012);
dst[3].set(SkScalarAve(x012, x123), SkScalarAve(y012, y123));
dst[4].set(x123, y123);
dst[5].set(x23, y23);
dst[6] = src[3];
}
static void flatten_double_cubic_extrema(SkScalar coords[14])
{
coords[4] = coords[8] = coords[6];
}
/** Given 4 points on a cubic bezier, chop it into 1, 2, 3 beziers such that
the resulting beziers are monotonic in Y. This is called by the scan converter.
Depending on what is returned, dst[] is treated as follows
0 dst[0..3] is the original cubic
1 dst[0..3] and dst[3..6] are the two new cubics
2 dst[0..3], dst[3..6], dst[6..9] are the three new cubics
If dst == null, it is ignored and only the count is returned.
*/
int SkChopCubicAtYExtrema(const SkPoint src[4], SkPoint dst[10]) {
SkScalar tValues[2];
int roots = SkFindCubicExtrema(src[0].fY, src[1].fY, src[2].fY,
src[3].fY, tValues);
SkChopCubicAt(src, dst, tValues, roots);
if (dst && roots > 0) {
// we do some cleanup to ensure our Y extrema are flat
flatten_double_cubic_extrema(&dst[0].fY);
if (roots == 2) {
flatten_double_cubic_extrema(&dst[3].fY);
}
}
return roots;
}
int SkChopCubicAtXExtrema(const SkPoint src[4], SkPoint dst[10]) {
SkScalar tValues[2];
int roots = SkFindCubicExtrema(src[0].fX, src[1].fX, src[2].fX,
src[3].fX, tValues);
SkChopCubicAt(src, dst, tValues, roots);
if (dst && roots > 0) {
// we do some cleanup to ensure our Y extrema are flat
flatten_double_cubic_extrema(&dst[0].fX);
if (roots == 2) {
flatten_double_cubic_extrema(&dst[3].fX);
}
}
return roots;
}
/** http://www.faculty.idc.ac.il/arik/quality/appendixA.html
Inflection means that curvature is zero.
Curvature is [F' x F''] / [F'^3]
So we solve F'x X F''y - F'y X F''y == 0
After some canceling of the cubic term, we get
A = b - a
B = c - 2b + a
C = d - 3c + 3b - a
(BxCy - ByCx)t^2 + (AxCy - AyCx)t + AxBy - AyBx == 0
*/
int SkFindCubicInflections(const SkPoint src[4], SkScalar tValues[])
{
SkScalar Ax = src[1].fX - src[0].fX;
SkScalar Ay = src[1].fY - src[0].fY;
SkScalar Bx = src[2].fX - 2 * src[1].fX + src[0].fX;
SkScalar By = src[2].fY - 2 * src[1].fY + src[0].fY;
SkScalar Cx = src[3].fX + 3 * (src[1].fX - src[2].fX) - src[0].fX;
SkScalar Cy = src[3].fY + 3 * (src[1].fY - src[2].fY) - src[0].fY;
int count;
#ifdef SK_SCALAR_IS_FLOAT
count = SkFindUnitQuadRoots(Bx*Cy - By*Cx, Ax*Cy - Ay*Cx, Ax*By - Ay*Bx, tValues);
#else
Sk64 A, B, C, tmp;
A.setMul(Bx, Cy);
tmp.setMul(By, Cx);
A.sub(tmp);
B.setMul(Ax, Cy);
tmp.setMul(Ay, Cx);
B.sub(tmp);
C.setMul(Ax, By);
tmp.setMul(Ay, Bx);
C.sub(tmp);
count = Sk64FindFixedQuadRoots(A, B, C, tValues);
#endif
return count;
}
int SkChopCubicAtInflections(const SkPoint src[], SkPoint dst[10])
{
SkScalar tValues[2];
int count = SkFindCubicInflections(src, tValues);
if (dst)
{
if (count == 0)
memcpy(dst, src, 4 * sizeof(SkPoint));
else
SkChopCubicAt(src, dst, tValues, count);
}
return count + 1;
}
template <typename T> void bubble_sort(T array[], int count)
{
for (int i = count - 1; i > 0; --i)
for (int j = i; j > 0; --j)
if (array[j] < array[j-1])
{
T tmp(array[j]);
array[j] = array[j-1];
array[j-1] = tmp;
}
}
#include "SkFP.h"
// newton refinement
#if 0
static SkScalar refine_cubic_root(const SkFP coeff[4], SkScalar root)
{
// x1 = x0 - f(t) / f'(t)
SkFP T = SkScalarToFloat(root);
SkFP N, D;
// f' = 3*coeff[0]*T^2 + 2*coeff[1]*T + coeff[2]
D = SkFPMul(SkFPMul(coeff[0], SkFPMul(T,T)), 3);
D = SkFPAdd(D, SkFPMulInt(SkFPMul(coeff[1], T), 2));
D = SkFPAdd(D, coeff[2]);
if (D == 0)
return root;
// f = coeff[0]*T^3 + coeff[1]*T^2 + coeff[2]*T + coeff[3]
N = SkFPMul(SkFPMul(SkFPMul(T, T), T), coeff[0]);
N = SkFPAdd(N, SkFPMul(SkFPMul(T, T), coeff[1]));
N = SkFPAdd(N, SkFPMul(T, coeff[2]));
N = SkFPAdd(N, coeff[3]);
if (N)
{
SkScalar delta = SkFPToScalar(SkFPDiv(N, D));
if (delta)
root -= delta;
}
return root;
}
#endif
#if defined _WIN32 && _MSC_VER >= 1300 && defined SK_SCALAR_IS_FIXED // disable warning : unreachable code if building fixed point for windows desktop
#pragma warning ( disable : 4702 )
#endif
/* Solve coeff(t) == 0, returning the number of roots that
lie withing 0 < t < 1.
coeff[0]t^3 + coeff[1]t^2 + coeff[2]t + coeff[3]
*/
static int solve_cubic_polynomial(const SkFP coeff[4], SkScalar tValues[3])
{
#ifndef SK_SCALAR_IS_FLOAT
return 0; // this is not yet implemented for software float
#endif
if (SkScalarNearlyZero(coeff[0])) // we're just a quadratic
{
return SkFindUnitQuadRoots(coeff[1], coeff[2], coeff[3], tValues);
}
SkFP a, b, c, Q, R;
{
SkASSERT(coeff[0] != 0);
SkFP inva = SkFPInvert(coeff[0]);
a = SkFPMul(coeff[1], inva);
b = SkFPMul(coeff[2], inva);
c = SkFPMul(coeff[3], inva);
}
Q = SkFPDivInt(SkFPSub(SkFPMul(a,a), SkFPMulInt(b, 3)), 9);
// R = (2*a*a*a - 9*a*b + 27*c) / 54;
R = SkFPMulInt(SkFPMul(SkFPMul(a, a), a), 2);
R = SkFPSub(R, SkFPMulInt(SkFPMul(a, b), 9));
R = SkFPAdd(R, SkFPMulInt(c, 27));
R = SkFPDivInt(R, 54);
SkFP Q3 = SkFPMul(SkFPMul(Q, Q), Q);
SkFP R2MinusQ3 = SkFPSub(SkFPMul(R,R), Q3);
SkFP adiv3 = SkFPDivInt(a, 3);
SkScalar* roots = tValues;
SkScalar r;
if (SkFPLT(R2MinusQ3, 0)) // we have 3 real roots
{
#ifdef SK_SCALAR_IS_FLOAT
float theta = sk_float_acos(R / sk_float_sqrt(Q3));
float neg2RootQ = -2 * sk_float_sqrt(Q);
r = neg2RootQ * sk_float_cos(theta/3) - adiv3;
if (is_unit_interval(r))
*roots++ = r;
r = neg2RootQ * sk_float_cos((theta + 2*SK_ScalarPI)/3) - adiv3;
if (is_unit_interval(r))
*roots++ = r;
r = neg2RootQ * sk_float_cos((theta - 2*SK_ScalarPI)/3) - adiv3;
if (is_unit_interval(r))
*roots++ = r;
// now sort the roots
bubble_sort(tValues, (int)(roots - tValues));
#endif
}
else // we have 1 real root
{
SkFP A = SkFPAdd(SkFPAbs(R), SkFPSqrt(R2MinusQ3));
A = SkFPCubeRoot(A);
if (SkFPGT(R, 0))
A = SkFPNeg(A);
if (A != 0)
A = SkFPAdd(A, SkFPDiv(Q, A));
r = SkFPToScalar(SkFPSub(A, adiv3));
if (is_unit_interval(r))
*roots++ = r;
}
return (int)(roots - tValues);
}
/* Looking for F' dot F'' == 0
A = b - a
B = c - 2b + a
C = d - 3c + 3b - a
F' = 3Ct^2 + 6Bt + 3A
F'' = 6Ct + 6B
F' dot F'' -> CCt^3 + 3BCt^2 + (2BB + CA)t + AB
*/
static void formulate_F1DotF2(const SkScalar src[], SkFP coeff[4])
{
SkScalar a = src[2] - src[0];
SkScalar b = src[4] - 2 * src[2] + src[0];
SkScalar c = src[6] + 3 * (src[2] - src[4]) - src[0];
SkFP A = SkScalarToFP(a);
SkFP B = SkScalarToFP(b);
SkFP C = SkScalarToFP(c);
coeff[0] = SkFPMul(C, C);
coeff[1] = SkFPMulInt(SkFPMul(B, C), 3);
coeff[2] = SkFPMulInt(SkFPMul(B, B), 2);
coeff[2] = SkFPAdd(coeff[2], SkFPMul(C, A));
coeff[3] = SkFPMul(A, B);
}
// EXPERIMENTAL: can set this to zero to accept all t-values 0 < t < 1
//#define kMinTValueForChopping (SK_Scalar1 / 256)
#define kMinTValueForChopping 0
/* Looking for F' dot F'' == 0
A = b - a
B = c - 2b + a
C = d - 3c + 3b - a
F' = 3Ct^2 + 6Bt + 3A
F'' = 6Ct + 6B
F' dot F'' -> CCt^3 + 3BCt^2 + (2BB + CA)t + AB
*/
int SkFindCubicMaxCurvature(const SkPoint src[4], SkScalar tValues[3])
{
SkFP coeffX[4], coeffY[4];
int i;
formulate_F1DotF2(&src[0].fX, coeffX);
formulate_F1DotF2(&src[0].fY, coeffY);
for (i = 0; i < 4; i++)
coeffX[i] = SkFPAdd(coeffX[i],coeffY[i]);
SkScalar t[3];
int count = solve_cubic_polynomial(coeffX, t);
int maxCount = 0;
// now remove extrema where the curvature is zero (mins)
// !!!! need a test for this !!!!
for (i = 0; i < count; i++)
{
// if (not_min_curvature())
if (t[i] > kMinTValueForChopping && t[i] < SK_Scalar1 - kMinTValueForChopping)
tValues[maxCount++] = t[i];
}
return maxCount;
}
int SkChopCubicAtMaxCurvature(const SkPoint src[4], SkPoint dst[13], SkScalar tValues[3])
{
SkScalar t_storage[3];
if (tValues == NULL)
tValues = t_storage;
int count = SkFindCubicMaxCurvature(src, tValues);
if (dst)
{
if (count == 0)
memcpy(dst, src, 4 * sizeof(SkPoint));
else
SkChopCubicAt(src, dst, tValues, count);
}
return count + 1;
}
bool SkXRayCrossesMonotonicCubic(const SkXRay& pt, const SkPoint cubic[4], bool* ambiguous) {
if (ambiguous) {
*ambiguous = false;
}
// Find the minimum and maximum y of the extrema, which are the
// first and last points since this cubic is monotonic
SkScalar min_y = SkMinScalar(cubic[0].fY, cubic[3].fY);
SkScalar max_y = SkMaxScalar(cubic[0].fY, cubic[3].fY);
if (pt.fY == cubic[0].fY
|| pt.fY < min_y
|| pt.fY > max_y) {
// The query line definitely does not cross the curve
if (ambiguous) {
*ambiguous = (pt.fY == cubic[0].fY);
}
return false;
}
bool pt_at_extremum = (pt.fY == cubic[3].fY);
SkScalar min_x =
SkMinScalar(
SkMinScalar(
SkMinScalar(cubic[0].fX, cubic[1].fX),
cubic[2].fX),
cubic[3].fX);
if (pt.fX < min_x) {
// The query line definitely crosses the curve
if (ambiguous) {
*ambiguous = pt_at_extremum;
}
return true;
}
SkScalar max_x =
SkMaxScalar(
SkMaxScalar(
SkMaxScalar(cubic[0].fX, cubic[1].fX),
cubic[2].fX),
cubic[3].fX);
if (pt.fX > max_x) {
// The query line definitely does not cross the curve
return false;
}
// Do a binary search to find the parameter value which makes y as
// close as possible to the query point. See whether the query
// line's origin is to the left of the associated x coordinate.
// kMaxIter is chosen as the number of mantissa bits for a float,
// since there's no way we are going to get more precision by
// iterating more times than that.
const int kMaxIter = 23;
SkPoint eval;
int iter = 0;
SkScalar upper_t;
SkScalar lower_t;
// Need to invert direction of t parameter if cubic goes up
// instead of down
if (cubic[3].fY > cubic[0].fY) {
upper_t = SK_Scalar1;
lower_t = SkFloatToScalar(0);
} else {
upper_t = SkFloatToScalar(0);
lower_t = SK_Scalar1;
}
do {
SkScalar t = SkScalarAve(upper_t, lower_t);
SkEvalCubicAt(cubic, t, &eval, NULL, NULL);
if (pt.fY > eval.fY) {
lower_t = t;
} else {
upper_t = t;
}
} while (++iter < kMaxIter
&& !SkScalarNearlyZero(eval.fY - pt.fY));
if (pt.fX <= eval.fX) {
if (ambiguous) {
*ambiguous = pt_at_extremum;
}
return true;
}
return false;
}
int SkNumXRayCrossingsForCubic(const SkXRay& pt, const SkPoint cubic[4], bool* ambiguous) {
int num_crossings = 0;
SkPoint monotonic_cubics[10];
int num_monotonic_cubics = SkChopCubicAtYExtrema(cubic, monotonic_cubics);
if (ambiguous) {
*ambiguous = false;
}
bool locally_ambiguous;
if (SkXRayCrossesMonotonicCubic(pt, &monotonic_cubics[0], &locally_ambiguous))
++num_crossings;
if (ambiguous) {
*ambiguous |= locally_ambiguous;
}
if (num_monotonic_cubics > 0)
if (SkXRayCrossesMonotonicCubic(pt, &monotonic_cubics[3], &locally_ambiguous))
++num_crossings;
if (ambiguous) {
*ambiguous |= locally_ambiguous;
}
if (num_monotonic_cubics > 1)
if (SkXRayCrossesMonotonicCubic(pt, &monotonic_cubics[6], &locally_ambiguous))
++num_crossings;
if (ambiguous) {
*ambiguous |= locally_ambiguous;
}
return num_crossings;
}
////////////////////////////////////////////////////////////////////////////////
/* Find t value for quadratic [a, b, c] = d.
Return 0 if there is no solution within [0, 1)
*/
static SkScalar quad_solve(SkScalar a, SkScalar b, SkScalar c, SkScalar d)
{
// At^2 + Bt + C = d
SkScalar A = a - 2 * b + c;
SkScalar B = 2 * (b - a);
SkScalar C = a - d;
SkScalar roots[2];
int count = SkFindUnitQuadRoots(A, B, C, roots);
SkASSERT(count <= 1);
return count == 1 ? roots[0] : 0;
}
/* given a quad-curve and a point (x,y), chop the quad at that point and return
the new quad's offCurve point. Should only return false if the computed pos
is the start of the curve (i.e. root == 0)
*/
static bool quad_pt2OffCurve(const SkPoint quad[3], SkScalar x, SkScalar y, SkPoint* offCurve)
{
const SkScalar* base;
SkScalar value;
if (SkScalarAbs(x) < SkScalarAbs(y)) {
base = &quad[0].fX;
value = x;
} else {
base = &quad[0].fY;
value = y;
}
// note: this returns 0 if it thinks value is out of range, meaning the
// root might return something outside of [0, 1)
SkScalar t = quad_solve(base[0], base[2], base[4], value);
if (t > 0)
{
SkPoint tmp[5];
SkChopQuadAt(quad, tmp, t);
*offCurve = tmp[1];
return true;
} else {
/* t == 0 means either the value triggered a root outside of [0, 1)
For our purposes, we can ignore the <= 0 roots, but we want to
catch the >= 1 roots (which given our caller, will basically mean
a root of 1, give-or-take numerical instability). If we are in the
>= 1 case, return the existing offCurve point.
The test below checks to see if we are close to the "end" of the
curve (near base[4]). Rather than specifying a tolerance, I just
check to see if value is on to the right/left of the middle point
(depending on the direction/sign of the end points).
*/
if ((base[0] < base[4] && value > base[2]) ||
(base[0] > base[4] && value < base[2])) // should root have been 1
{
*offCurve = quad[1];
return true;
}
}
return false;
}
static const SkPoint gQuadCirclePts[kSkBuildQuadArcStorage] = {
{ SK_Scalar1, 0 },
{ SK_Scalar1, SK_ScalarTanPIOver8 },
{ SK_ScalarRoot2Over2, SK_ScalarRoot2Over2 },
{ SK_ScalarTanPIOver8, SK_Scalar1 },
{ 0, SK_Scalar1 },
{ -SK_ScalarTanPIOver8, SK_Scalar1 },
{ -SK_ScalarRoot2Over2, SK_ScalarRoot2Over2 },
{ -SK_Scalar1, SK_ScalarTanPIOver8 },
{ -SK_Scalar1, 0 },
{ -SK_Scalar1, -SK_ScalarTanPIOver8 },
{ -SK_ScalarRoot2Over2, -SK_ScalarRoot2Over2 },
{ -SK_ScalarTanPIOver8, -SK_Scalar1 },
{ 0, -SK_Scalar1 },
{ SK_ScalarTanPIOver8, -SK_Scalar1 },
{ SK_ScalarRoot2Over2, -SK_ScalarRoot2Over2 },
{ SK_Scalar1, -SK_ScalarTanPIOver8 },
{ SK_Scalar1, 0 }
};
int SkBuildQuadArc(const SkVector& uStart, const SkVector& uStop,
SkRotationDirection dir, const SkMatrix* userMatrix,
SkPoint quadPoints[])
{
// rotate by x,y so that uStart is (1.0)
SkScalar x = SkPoint::DotProduct(uStart, uStop);
SkScalar y = SkPoint::CrossProduct(uStart, uStop);
SkScalar absX = SkScalarAbs(x);
SkScalar absY = SkScalarAbs(y);
int pointCount;
// check for (effectively) coincident vectors
// this can happen if our angle is nearly 0 or nearly 180 (y == 0)
// ... we use the dot-prod to distinguish between 0 and 180 (x > 0)
if (absY <= SK_ScalarNearlyZero && x > 0 &&
((y >= 0 && kCW_SkRotationDirection == dir) ||
(y <= 0 && kCCW_SkRotationDirection == dir))) {
// just return the start-point
quadPoints[0].set(SK_Scalar1, 0);
pointCount = 1;
} else {
if (dir == kCCW_SkRotationDirection)
y = -y;
// what octant (quadratic curve) is [xy] in?
int oct = 0;
bool sameSign = true;
if (0 == y)
{
oct = 4; // 180
SkASSERT(SkScalarAbs(x + SK_Scalar1) <= SK_ScalarNearlyZero);
}
else if (0 == x)
{
SkASSERT(absY - SK_Scalar1 <= SK_ScalarNearlyZero);
if (y > 0)
oct = 2; // 90
else
oct = 6; // 270
}
else
{
if (y < 0)
oct += 4;
if ((x < 0) != (y < 0))
{
oct += 2;
sameSign = false;
}
if ((absX < absY) == sameSign)
oct += 1;
}
int wholeCount = oct << 1;
memcpy(quadPoints, gQuadCirclePts, (wholeCount + 1) * sizeof(SkPoint));
const SkPoint* arc = &gQuadCirclePts[wholeCount];
if (quad_pt2OffCurve(arc, x, y, &quadPoints[wholeCount + 1]))
{
quadPoints[wholeCount + 2].set(x, y);
wholeCount += 2;
}
pointCount = wholeCount + 1;
}
// now handle counter-clockwise and the initial unitStart rotation
SkMatrix matrix;
matrix.setSinCos(uStart.fY, uStart.fX);
if (dir == kCCW_SkRotationDirection) {
matrix.preScale(SK_Scalar1, -SK_Scalar1);
}
if (userMatrix) {
matrix.postConcat(*userMatrix);
}
matrix.mapPoints(quadPoints, pointCount);
return pointCount;
}