| /* |
| * Copyright (c) 1991, 1992 Paul Kranenburg <pk@cs.few.eur.nl> |
| * Copyright (c) 1993 Branko Lankester <branko@hacktic.nl> |
| * Copyright (c) 1993, 1994, 1995, 1996 Rick Sladkey <jrs@world.std.com> |
| * Copyright (c) 1996-1999 Wichert Akkerman <wichert@cistron.nl> |
| * Copyright (c) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation |
| * Linux for s390 port by D.J. Barrow |
| * <barrow_dj@mail.yahoo.com,djbarrow@de.ibm.com> |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * $Id: util.c,v 1.62 2005/06/08 20:45:28 roland Exp $ |
| */ |
| |
| #include "defs.h" |
| #include "../syscall-android.h" |
| |
| #include <signal.h> |
| #include <sys/syscall.h> |
| #ifndef HAVE_ANDROID_OS |
| #include <sys/user.h> |
| #endif |
| #include <sys/param.h> |
| #include <fcntl.h> |
| #if HAVE_SYS_UIO_H |
| #include <sys/uio.h> |
| #endif |
| #ifdef SUNOS4 |
| #include <machine/reg.h> |
| #include <a.out.h> |
| #include <link.h> |
| #endif /* SUNOS4 */ |
| |
| #if defined(linux) && (__GLIBC__ < 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ < 1)) |
| #include <linux/ptrace.h> |
| #endif |
| |
| #if defined(LINUX) && defined(IA64) |
| # include <asm/ptrace_offsets.h> |
| # include <asm/rse.h> |
| #endif |
| |
| #ifdef HAVE_SYS_REG_H |
| #include <sys/reg.h> |
| # define PTRACE_PEEKUSR PTRACE_PEEKUSER |
| #elif defined(HAVE_LINUX_PTRACE_H) |
| #undef PTRACE_SYSCALL |
| # ifdef HAVE_STRUCT_IA64_FPREG |
| # define ia64_fpreg XXX_ia64_fpreg |
| # endif |
| # ifdef HAVE_STRUCT_PT_ALL_USER_REGS |
| # define pt_all_user_regs XXX_pt_all_user_regs |
| # endif |
| #include <linux/ptrace.h> |
| # undef ia64_fpreg |
| # undef pt_all_user_regs |
| #endif |
| |
| #ifdef SUNOS4_KERNEL_ARCH_KLUDGE |
| #include <sys/utsname.h> |
| #endif /* SUNOS4_KERNEL_ARCH_KLUDGE */ |
| |
| #if defined(LINUXSPARC) |
| |
| # define fpq kernel_fpq |
| # define fq kernel_fq |
| # define fpu kernel_fpu |
| # include <asm/reg.h> |
| # undef fpq |
| # undef fq |
| # undef fpu |
| |
| #if defined (SPARC64) |
| # define r_pc r_tpc |
| # undef PTRACE_GETREGS |
| # define PTRACE_GETREGS PTRACE_GETREGS64 |
| # undef PTRACE_SETREGS |
| # define PTRACE_SETREGS PTRACE_SETREGS64 |
| #endif /* SPARC64 */ |
| |
| #if !defined(__GLIBC__) |
| |
| #include <linux/unistd.h> |
| |
| #define _hack_syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,\ |
| type5,arg5,syscall) \ |
| type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \ |
| { \ |
| long __res; \ |
| \ |
| __asm__ volatile ("or %%g0, %1, %%o0\n\t" \ |
| "or %%g0, %2, %%o1\n\t" \ |
| "or %%g0, %3, %%o2\n\t" \ |
| "or %%g0, %4, %%o3\n\t" \ |
| "or %%g0, %5, %%o4\n\t" \ |
| "or %%g0, %6, %%g1\n\t" \ |
| #if defined (SPARC64) |
| "t 0x6d\n\t" \ |
| #else |
| "t 0x10\n\t" \ |
| #endif |
| "bcc 1f\n\t" \ |
| "or %%g0, %%o0, %0\n\t" \ |
| "sub %%g0, %%o0, %0\n\t" \ |
| "1:\n\t" \ |
| : "=r" (__res) \ |
| : "0" ((long)(arg1)),"1" ((long)(arg2)), \ |
| "2" ((long)(arg3)),"3" ((long)(arg4)),"4" ((long)(arg5)), \ |
| "i" (__NR_##syscall) \ |
| : "g1", "o0", "o1", "o2", "o3", "o4"); \ |
| if (__res>=0) \ |
| return (type) __res; \ |
| errno = -__res; \ |
| return -1; \ |
| } |
| |
| static _hack_syscall5(int,_ptrace,int,__request,int,__pid,int,__addr,int,__data,int,__addr2,ptrace) |
| |
| #define _ptrace |
| |
| #endif |
| |
| #endif |
| |
| /* macros */ |
| #ifndef MAX |
| #define MAX(a,b) (((a) > (b)) ? (a) : (b)) |
| #endif |
| #ifndef MIN |
| #define MIN(a,b) (((a) < (b)) ? (a) : (b)) |
| #endif |
| |
| #if 0 |
| void |
| tv_tv(tv, a, b) |
| struct timeval *tv; |
| int a; |
| int b; |
| { |
| tv->tv_sec = a; |
| tv->tv_usec = b; |
| } |
| #endif |
| |
| int |
| tv_nz(a) |
| struct timeval *a; |
| { |
| return a->tv_sec || a->tv_usec; |
| } |
| |
| int |
| tv_cmp(a, b) |
| struct timeval *a, *b; |
| { |
| if (a->tv_sec < b->tv_sec |
| || (a->tv_sec == b->tv_sec && a->tv_usec < b->tv_usec)) |
| return -1; |
| if (a->tv_sec > b->tv_sec |
| || (a->tv_sec == b->tv_sec && a->tv_usec > b->tv_usec)) |
| return 1; |
| return 0; |
| } |
| |
| double |
| tv_float(tv) |
| struct timeval *tv; |
| { |
| return tv->tv_sec + tv->tv_usec/1000000.0; |
| } |
| |
| void |
| tv_add(tv, a, b) |
| struct timeval *tv, *a, *b; |
| { |
| tv->tv_sec = a->tv_sec + b->tv_sec; |
| tv->tv_usec = a->tv_usec + b->tv_usec; |
| if (tv->tv_usec > 1000000) { |
| tv->tv_sec++; |
| tv->tv_usec -= 1000000; |
| } |
| } |
| |
| void |
| tv_sub(tv, a, b) |
| struct timeval *tv, *a, *b; |
| { |
| tv->tv_sec = a->tv_sec - b->tv_sec; |
| tv->tv_usec = a->tv_usec - b->tv_usec; |
| if (((long) tv->tv_usec) < 0) { |
| tv->tv_sec--; |
| tv->tv_usec += 1000000; |
| } |
| } |
| |
| void |
| tv_div(tv, a, n) |
| struct timeval *tv, *a; |
| int n; |
| { |
| tv->tv_usec = (a->tv_sec % n * 1000000 + a->tv_usec + n / 2) / n; |
| tv->tv_sec = a->tv_sec / n + tv->tv_usec / 1000000; |
| tv->tv_usec %= 1000000; |
| } |
| |
| void |
| tv_mul(tv, a, n) |
| struct timeval *tv, *a; |
| int n; |
| { |
| tv->tv_usec = a->tv_usec * n; |
| tv->tv_sec = a->tv_sec * n + a->tv_usec / 1000000; |
| tv->tv_usec %= 1000000; |
| } |
| |
| char * |
| xlookup(xlat, val) |
| const struct xlat *xlat; |
| int val; |
| { |
| for (; xlat->str != NULL; xlat++) |
| if (xlat->val == val) |
| return xlat->str; |
| return NULL; |
| } |
| |
| /* |
| * Print entry in struct xlat table, if there. |
| */ |
| void |
| printxval(xlat, val, dflt) |
| const struct xlat *xlat; |
| int val; |
| const char *dflt; |
| { |
| char *str = xlookup(xlat, val); |
| |
| if (str) |
| tprintf("%s", str); |
| else |
| tprintf("%#x /* %s */", val, dflt); |
| } |
| |
| /* |
| * Interpret `xlat' as an array of flags |
| * print the entries whose bits are on in `flags' |
| * return # of flags printed. |
| */ |
| int |
| addflags(xlat, flags) |
| const struct xlat *xlat; |
| int flags; |
| { |
| int n; |
| |
| for (n = 0; xlat->str; xlat++) { |
| if (xlat->val && (flags & xlat->val) == xlat->val) { |
| tprintf("|%s", xlat->str); |
| flags &= ~xlat->val; |
| n++; |
| } |
| } |
| if (flags) { |
| tprintf("|%#x", flags); |
| n++; |
| } |
| return n; |
| } |
| |
| int |
| printflags(xlat, flags, dflt) |
| const struct xlat *xlat; |
| int flags; |
| const char *dflt; |
| { |
| int n; |
| char *sep; |
| |
| if (flags == 0 && xlat->val == 0) { |
| tprintf("%s", xlat->str); |
| return 1; |
| } |
| |
| sep = ""; |
| for (n = 0; xlat->str; xlat++) { |
| if (xlat->val && (flags & xlat->val) == xlat->val) { |
| tprintf("%s%s", sep, xlat->str); |
| flags &= ~xlat->val; |
| sep = "|"; |
| n++; |
| } |
| } |
| |
| if (n) { |
| if (flags) { |
| tprintf("%s%#x", sep, flags); |
| n++; |
| } |
| } else { |
| if (flags) { |
| tprintf("%#x", flags); |
| if (dflt) |
| tprintf(" /* %s */", dflt); |
| } else { |
| if (dflt) |
| tprintf("0"); |
| } |
| } |
| |
| return n; |
| } |
| |
| void |
| printnum(tcp, addr, fmt) |
| struct tcb *tcp; |
| long addr; |
| char *fmt; |
| { |
| long num; |
| |
| if (!addr) { |
| tprintf("NULL"); |
| return; |
| } |
| if (umove(tcp, addr, &num) < 0) { |
| tprintf("%#lx", addr); |
| return; |
| } |
| tprintf("["); |
| tprintf(fmt, num); |
| tprintf("]"); |
| } |
| |
| void |
| printuid(text, uid) |
| const char *text; |
| unsigned long uid; |
| { |
| tprintf("%s", text); |
| tprintf((uid == -1) ? "%ld" : "%lu", uid); |
| } |
| |
| static char path[MAXPATHLEN + 1]; |
| |
| static void |
| string_quote(str) |
| const char *str; |
| { |
| char buf[2 * MAXPATHLEN + 1]; |
| char *s; |
| |
| if (!strpbrk(str, "\"\'\\")) { |
| tprintf("\"%s\"", str); |
| return; |
| } |
| for (s = buf; *str; str++) { |
| switch (*str) { |
| case '\"': case '\'': case '\\': |
| *s++ = '\\'; *s++ = *str; break; |
| default: |
| *s++ = *str; break; |
| } |
| } |
| *s = '\0'; |
| tprintf("\"%s\"", buf); |
| } |
| |
| void |
| printpath(tcp, addr) |
| struct tcb *tcp; |
| long addr; |
| { |
| if (addr == 0) |
| tprintf("NULL"); |
| else if (umovestr(tcp, addr, MAXPATHLEN, path) < 0) |
| tprintf("%#lx", addr); |
| else |
| string_quote(path); |
| return; |
| } |
| |
| void |
| printpathn(tcp, addr, n) |
| struct tcb *tcp; |
| long addr; |
| int n; |
| { |
| if (addr == 0) |
| tprintf("NULL"); |
| else if (umovestr(tcp, addr, n, path) < 0) |
| tprintf("%#lx", addr); |
| else { |
| path[n] = '\0'; |
| string_quote(path); |
| } |
| } |
| |
| void |
| printstr(tcp, addr, len) |
| struct tcb *tcp; |
| long addr; |
| int len; |
| { |
| static unsigned char *str = NULL; |
| static char *outstr; |
| int i, n, c, usehex; |
| char *s, *outend; |
| |
| if (!addr) { |
| tprintf("NULL"); |
| return; |
| } |
| if (!str) { |
| if ((str = malloc(max_strlen)) == NULL |
| || (outstr = malloc(2*max_strlen)) == NULL) { |
| fprintf(stderr, "out of memory\n"); |
| tprintf("%#lx", addr); |
| return; |
| } |
| } |
| outend = outstr + max_strlen * 2 - 10; |
| if (len < 0) { |
| n = max_strlen; |
| if (umovestr(tcp, addr, n, (char *) str) < 0) { |
| tprintf("%#lx", addr); |
| return; |
| } |
| } |
| else { |
| n = MIN(len, max_strlen); |
| if (umoven(tcp, addr, n, (char *) str) < 0) { |
| tprintf("%#lx", addr); |
| return; |
| } |
| } |
| |
| usehex = 0; |
| if (xflag > 1) |
| usehex = 1; |
| else if (xflag) { |
| for (i = 0; i < n; i++) { |
| c = str[i]; |
| if (len < 0 && c == '\0') |
| break; |
| if (!isprint(c) && !isspace(c)) { |
| usehex = 1; |
| break; |
| } |
| } |
| } |
| |
| s = outstr; |
| *s++ = '\"'; |
| |
| if (usehex) { |
| for (i = 0; i < n; i++) { |
| c = str[i]; |
| if (len < 0 && c == '\0') |
| break; |
| sprintf(s, "\\x%02x", c); |
| s += 4; |
| if (s > outend) |
| break; |
| } |
| } |
| else { |
| for (i = 0; i < n; i++) { |
| c = str[i]; |
| if (len < 0 && c == '\0') |
| break; |
| switch (c) { |
| case '\"': case '\'': case '\\': |
| *s++ = '\\'; *s++ = c; break; |
| case '\f': |
| *s++ = '\\'; *s++ = 'f'; break; |
| case '\n': |
| *s++ = '\\'; *s++ = 'n'; break; |
| case '\r': |
| *s++ = '\\'; *s++ = 'r'; break; |
| case '\t': |
| *s++ = '\\'; *s++ = 't'; break; |
| case '\v': |
| *s++ = '\\'; *s++ = 'v'; break; |
| default: |
| if (isprint(c)) |
| *s++ = c; |
| else if (i < n - 1 && isdigit(str[i + 1])) { |
| sprintf(s, "\\%03o", c); |
| s += 4; |
| } |
| else { |
| sprintf(s, "\\%o", c); |
| s += strlen(s); |
| } |
| break; |
| } |
| if (s > outend) |
| break; |
| } |
| } |
| |
| *s++ = '\"'; |
| if (i < len || (len < 0 && (i == n || s > outend))) { |
| *s++ = '.'; *s++ = '.'; *s++ = '.'; |
| } |
| *s = '\0'; |
| tprintf("%s", outstr); |
| } |
| |
| #if HAVE_SYS_UIO_H |
| void |
| dumpiov(tcp, len, addr) |
| struct tcb * tcp; |
| int len; |
| long addr; |
| { |
| struct iovec *iov; |
| int i; |
| unsigned long size; |
| |
| size = sizeof(*iov) * (unsigned long) len; |
| if (size / sizeof(*iov) != len |
| || (iov = (struct iovec *) malloc(size)) == NULL) { |
| fprintf(stderr, "out of memory\n"); |
| return; |
| } |
| if (umoven(tcp, addr, size, (char *) iov) >= 0) { |
| for (i = 0; i < len; i++) { |
| /* include the buffer number to make it easy to |
| * match up the trace with the source */ |
| tprintf(" * %lu bytes in buffer %d\n", |
| (unsigned long)iov[i].iov_len, i); |
| dumpstr(tcp, (long) iov[i].iov_base, |
| iov[i].iov_len); |
| } |
| } |
| free((char *) iov); |
| |
| } |
| #endif |
| |
| void |
| dumpstr(tcp, addr, len) |
| struct tcb *tcp; |
| long addr; |
| int len; |
| { |
| static int strsize = -1; |
| static unsigned char *str; |
| static char outstr[80]; |
| char *s; |
| int i, j; |
| |
| if (strsize < len) { |
| if (str) |
| free(str); |
| if ((str = malloc(len)) == NULL) { |
| fprintf(stderr, "out of memory\n"); |
| return; |
| } |
| strsize = len; |
| } |
| |
| if (umoven(tcp, addr, len, (char *) str) < 0) |
| return; |
| |
| for (i = 0; i < len; i += 16) { |
| s = outstr; |
| sprintf(s, " | %05x ", i); |
| s += 9; |
| for (j = 0; j < 16; j++) { |
| if (j == 8) |
| *s++ = ' '; |
| if (i + j < len) { |
| sprintf(s, " %02x", str[i + j]); |
| s += 3; |
| } |
| else { |
| *s++ = ' '; *s++ = ' '; *s++ = ' '; |
| } |
| } |
| *s++ = ' '; *s++ = ' '; |
| for (j = 0; j < 16; j++) { |
| if (j == 8) |
| *s++ = ' '; |
| if (i + j < len) { |
| if (isprint(str[i + j])) |
| *s++ = str[i + j]; |
| else |
| *s++ = '.'; |
| } |
| else |
| *s++ = ' '; |
| } |
| tprintf("%s |\n", outstr); |
| } |
| } |
| |
| #define PAGMASK (~(PAGSIZ - 1)) |
| /* |
| * move `len' bytes of data from process `pid' |
| * at address `addr' to our space at `laddr' |
| */ |
| int |
| umoven(tcp, addr, len, laddr) |
| struct tcb *tcp; |
| long addr; |
| int len; |
| char *laddr; |
| { |
| |
| #ifdef LINUX |
| int pid = tcp->pid; |
| int n, m; |
| int started = 0; |
| union { |
| long val; |
| char x[sizeof(long)]; |
| } u; |
| |
| if (addr & (sizeof(long) - 1)) { |
| /* addr not a multiple of sizeof(long) */ |
| n = addr - (addr & -sizeof(long)); /* residue */ |
| addr &= -sizeof(long); /* residue */ |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *) addr, 0); |
| if (errno) { |
| if (started && (errno==EPERM || errno==EIO)) { |
| /* Ran into 'end of memory' - stupid "printpath" */ |
| return 0; |
| } |
| /* But if not started, we had a bogus address. */ |
| perror("ptrace: umoven"); |
| return -1; |
| } |
| started = 1; |
| memcpy(laddr, &u.x[n], m = MIN(sizeof(long) - n, len)); |
| addr += sizeof(long), laddr += m, len -= m; |
| } |
| while (len) { |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *) addr, 0); |
| if (errno) { |
| if (started && (errno==EPERM || errno==EIO)) { |
| /* Ran into 'end of memory' - stupid "printpath" */ |
| return 0; |
| } |
| if (addr != 0) |
| perror("ptrace: umoven"); |
| return -1; |
| } |
| started = 1; |
| memcpy(laddr, u.x, m = MIN(sizeof(long), len)); |
| addr += sizeof(long), laddr += m, len -= m; |
| } |
| #endif /* LINUX */ |
| |
| #ifdef SUNOS4 |
| int pid = tcp->pid; |
| #if 0 |
| int n, m; |
| union { |
| long val; |
| char x[sizeof(long)]; |
| } u; |
| |
| if (addr & (sizeof(long) - 1)) { |
| /* addr not a multiple of sizeof(long) */ |
| n = addr - (addr & -sizeof(long)); /* residue */ |
| addr &= -sizeof(long); /* residue */ |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *) addr, 0); |
| if (errno) { |
| perror("umoven"); |
| return -1; |
| } |
| memcpy(laddr, &u.x[n], m = MIN(sizeof(long) - n, len)); |
| addr += sizeof(long), laddr += m, len -= m; |
| } |
| while (len) { |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *) addr, 0); |
| if (errno) { |
| perror("umoven"); |
| return -1; |
| } |
| memcpy(laddr, u.x, m = MIN(sizeof(long), len)); |
| addr += sizeof(long), laddr += m, len -= m; |
| } |
| #else /* !oldway */ |
| int n; |
| |
| while (len) { |
| n = MIN(len, PAGSIZ); |
| n = MIN(n, ((addr + PAGSIZ) & PAGMASK) - addr); |
| if (ptrace(PTRACE_READDATA, pid, |
| (char *) addr, len, laddr) < 0) { |
| perror("umoven: ptrace(PTRACE_READDATA, ...)"); |
| abort(); |
| return -1; |
| } |
| len -= n; |
| addr += n; |
| laddr += n; |
| } |
| #endif /* !oldway */ |
| #endif /* SUNOS4 */ |
| |
| #ifdef USE_PROCFS |
| #ifdef HAVE_MP_PROCFS |
| int fd = tcp->pfd_as; |
| #else |
| int fd = tcp->pfd; |
| #endif |
| lseek(fd, addr, SEEK_SET); |
| if (read(fd, laddr, len) == -1) |
| return -1; |
| #endif /* USE_PROCFS */ |
| |
| return 0; |
| } |
| |
| /* |
| * like `umove' but make the additional effort of looking |
| * for a terminating zero byte. |
| */ |
| int |
| umovestr(tcp, addr, len, laddr) |
| struct tcb *tcp; |
| long addr; |
| int len; |
| char *laddr; |
| { |
| #ifdef USE_PROCFS |
| #ifdef HAVE_MP_PROCFS |
| int fd = tcp->pfd_as; |
| #else |
| int fd = tcp->pfd; |
| #endif |
| /* Some systems (e.g. FreeBSD) can be upset if we read off the |
| end of valid memory, avoid this by trying to read up |
| to page boundaries. But we don't know what a page is (and |
| getpagesize(2) (if it exists) doesn't necessarily return |
| hardware page size). Assume all pages >= 1024 (a-historical |
| I know) */ |
| |
| int page = 1024; /* How to find this? */ |
| int move = page - (addr & (page - 1)); |
| int left = len; |
| |
| lseek(fd, addr, SEEK_SET); |
| |
| while (left) { |
| if (move > left) move = left; |
| if ((move = read(fd, laddr, move)) <= 0) |
| return left != len ? 0 : -1; |
| if (memchr (laddr, 0, move)) break; |
| left -= move; |
| laddr += move; |
| addr += move; |
| move = page; |
| } |
| #else /* !USE_PROCFS */ |
| int started = 0; |
| int pid = tcp->pid; |
| int i, n, m; |
| union { |
| long val; |
| char x[sizeof(long)]; |
| } u; |
| |
| if (addr & (sizeof(long) - 1)) { |
| /* addr not a multiple of sizeof(long) */ |
| n = addr - (addr & -sizeof(long)); /* residue */ |
| addr &= -sizeof(long); /* residue */ |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *)addr, 0); |
| if (errno) { |
| if (started && (errno==EPERM || errno==EIO)) { |
| /* Ran into 'end of memory' - stupid "printpath" */ |
| return 0; |
| } |
| perror("umovestr"); |
| return -1; |
| } |
| started = 1; |
| memcpy(laddr, &u.x[n], m = MIN(sizeof(long)-n,len)); |
| while (n & (sizeof(long) - 1)) |
| if (u.x[n++] == '\0') |
| return 0; |
| addr += sizeof(long), laddr += m, len -= m; |
| } |
| while (len) { |
| errno = 0; |
| u.val = ptrace(PTRACE_PEEKDATA, pid, (char *)addr, 0); |
| if (errno) { |
| if (started && (errno==EPERM || errno==EIO)) { |
| /* Ran into 'end of memory' - stupid "printpath" */ |
| return 0; |
| } |
| perror("umovestr"); |
| return -1; |
| } |
| started = 1; |
| memcpy(laddr, u.x, m = MIN(sizeof(long), len)); |
| for (i = 0; i < sizeof(long); i++) |
| if (u.x[i] == '\0') |
| return 0; |
| |
| addr += sizeof(long), laddr += m, len -= m; |
| } |
| #endif /* !USE_PROCFS */ |
| return 0; |
| } |
| |
| #ifdef LINUX |
| #if !defined (SPARC) && !defined(SPARC64) |
| #define PTRACE_WRITETEXT 101 |
| #define PTRACE_WRITEDATA 102 |
| #endif /* !SPARC && !SPARC64 */ |
| #endif /* LINUX */ |
| |
| #ifdef SUNOS4 |
| |
| static int |
| uload(cmd, pid, addr, len, laddr) |
| int cmd; |
| int pid; |
| long addr; |
| int len; |
| char *laddr; |
| { |
| #if 0 |
| int n; |
| |
| while (len) { |
| n = MIN(len, PAGSIZ); |
| n = MIN(n, ((addr + PAGSIZ) & PAGMASK) - addr); |
| if (ptrace(cmd, pid, (char *)addr, n, laddr) < 0) { |
| perror("uload: ptrace(PTRACE_WRITE, ...)"); |
| return -1; |
| } |
| len -= n; |
| addr += n; |
| laddr += n; |
| } |
| #else |
| int peek, poke; |
| int n, m; |
| union { |
| long val; |
| char x[sizeof(long)]; |
| } u; |
| |
| if (cmd == PTRACE_WRITETEXT) { |
| peek = PTRACE_PEEKTEXT; |
| poke = PTRACE_POKETEXT; |
| } |
| else { |
| peek = PTRACE_PEEKDATA; |
| poke = PTRACE_POKEDATA; |
| } |
| if (addr & (sizeof(long) - 1)) { |
| /* addr not a multiple of sizeof(long) */ |
| n = addr - (addr & -sizeof(long)); /* residue */ |
| addr &= -sizeof(long); |
| errno = 0; |
| u.val = ptrace(peek, pid, (char *) addr, 0); |
| if (errno) { |
| perror("uload: POKE"); |
| return -1; |
| } |
| memcpy(&u.x[n], laddr, m = MIN(sizeof(long) - n, len)); |
| if (ptrace(poke, pid, (char *)addr, u.val) < 0) { |
| perror("uload: POKE"); |
| return -1; |
| } |
| addr += sizeof(long), laddr += m, len -= m; |
| } |
| while (len) { |
| if (len < sizeof(long)) |
| u.val = ptrace(peek, pid, (char *) addr, 0); |
| memcpy(u.x, laddr, m = MIN(sizeof(long), len)); |
| if (ptrace(poke, pid, (char *) addr, u.val) < 0) { |
| perror("uload: POKE"); |
| return -1; |
| } |
| addr += sizeof(long), laddr += m, len -= m; |
| } |
| #endif |
| return 0; |
| } |
| |
| int |
| tload(pid, addr, len, laddr) |
| int pid; |
| int addr, len; |
| char *laddr; |
| { |
| return uload(PTRACE_WRITETEXT, pid, addr, len, laddr); |
| } |
| |
| int |
| dload(pid, addr, len, laddr) |
| int pid; |
| int addr; |
| int len; |
| char *laddr; |
| { |
| return uload(PTRACE_WRITEDATA, pid, addr, len, laddr); |
| } |
| |
| #endif /* SUNOS4 */ |
| |
| #ifndef USE_PROCFS |
| |
| int |
| upeek(pid, off, res) |
| int pid; |
| long off; |
| long *res; |
| { |
| long val; |
| |
| #ifdef SUNOS4_KERNEL_ARCH_KLUDGE |
| { |
| static int is_sun4m = -1; |
| struct utsname name; |
| |
| /* Round up the usual suspects. */ |
| if (is_sun4m == -1) { |
| if (uname(&name) < 0) { |
| perror("upeek: uname?"); |
| exit(1); |
| } |
| is_sun4m = strcmp(name.machine, "sun4m") == 0; |
| if (is_sun4m) { |
| extern const struct xlat struct_user_offsets[]; |
| const struct xlat *x; |
| |
| for (x = struct_user_offsets; x->str; x++) |
| x->val += 1024; |
| } |
| } |
| if (is_sun4m) |
| off += 1024; |
| } |
| #endif /* SUNOS4_KERNEL_ARCH_KLUDGE */ |
| errno = 0; |
| val = ptrace(PTRACE_PEEKUSER, pid, (char *) off, 0); |
| if (val == -1 && errno) { |
| char buf[60]; |
| sprintf(buf,"upeek: ptrace(PTRACE_PEEKUSER,%d,%lu,0)",pid,off); |
| perror(buf); |
| return -1; |
| } |
| *res = val; |
| return 0; |
| } |
| |
| #endif /* !USE_PROCFS */ |
| |
| #if 0 |
| long |
| getpc(tcp) |
| struct tcb *tcp; |
| { |
| |
| #ifdef LINUX |
| long pc; |
| #if defined(I386) |
| if (upeek(tcp->pid, 4*EIP, &pc) < 0) |
| return -1; |
| #elif defined(X86_64) |
| if (upeek(tcp->pid, 8*RIP, &pc) < 0) |
| return -1; |
| #elif defined(IA64) |
| if (upeek(tcp->pid, PT_B0, &pc) < 0) |
| return -1; |
| #elif defined(ARM) |
| if (upeek(tcp->pid, 4*15, &pc) < 0) |
| return -1; |
| #elif defined(POWERPC) |
| if (upeek(tcp->pid, sizeof(unsigned long)*PT_NIP, &pc) < 0) |
| return -1; |
| #elif defined(M68K) |
| if (upeek(tcp->pid, 4*PT_PC, &pc) < 0) |
| return -1; |
| #elif defined(ALPHA) |
| if (upeek(tcp->pid, REG_PC, &pc) < 0) |
| return -1; |
| #elif defined(MIPS) |
| if (upeek(tcp->pid, REG_EPC, &pc) < 0) |
| return -1; |
| #elif defined(SPARC) || defined(SPARC64) |
| struct regs regs; |
| if (ptrace(PTRACE_GETREGS,tcp->pid,(char *)®s,0) < 0) |
| return -1; |
| pc = regs.r_pc; |
| #elif defined(S390) || defined(S390X) |
| if(upeek(tcp->pid,PT_PSWADDR,&pc) < 0) |
| return -1; |
| #elif defined(HPPA) |
| if(upeek(tcp->pid,PT_IAOQ0,&pc) < 0) |
| return -1; |
| #elif defined(SH) |
| if (upeek(tcp->pid, 4*REG_PC ,&pc) < 0) |
| return -1; |
| #elif defined(SH64) |
| if (upeek(tcp->pid, REG_PC ,&pc) < 0) |
| return -1; |
| #endif |
| return pc; |
| #endif /* LINUX */ |
| |
| #ifdef SUNOS4 |
| /* |
| * Return current program counter for `pid' |
| * Assumes PC is never 0xffffffff |
| */ |
| struct regs regs; |
| |
| if (ptrace(PTRACE_GETREGS, tcp->pid, (char *) ®s, 0) < 0) { |
| perror("getpc: ptrace(PTRACE_GETREGS, ...)"); |
| return -1; |
| } |
| return regs.r_pc; |
| #endif /* SUNOS4 */ |
| |
| #ifdef SVR4 |
| /* XXX */ |
| return 0; |
| #endif /* SVR4 */ |
| |
| #ifdef FREEBSD |
| struct reg regs; |
| pread(tcp->pfd_reg, ®s, sizeof(regs), 0); |
| return regs.r_eip; |
| #endif /* FREEBSD */ |
| } |
| #endif |
| |
| void |
| printcall(tcp) |
| struct tcb *tcp; |
| { |
| #define PRINTBADPC tprintf(sizeof(long) == 4 ? "[????????] " : \ |
| sizeof(long) == 8 ? "[????????????????] " : \ |
| NULL /* crash */) |
| |
| #ifdef LINUX |
| #ifdef I386 |
| long eip; |
| |
| if (upeek(tcp->pid, 4*EIP, &eip) < 0) { |
| PRINTBADPC; |
| return; |
| } |
| tprintf("[%08lx] ", eip); |
| |
| #elif defined(S390) || defined(S390X) |
| long psw; |
| if(upeek(tcp->pid,PT_PSWADDR,&psw) < 0) { |
| PRINTBADPC; |
| return; |
| } |
| #ifdef S390 |
| tprintf("[%08lx] ", psw); |
| #elif S390X |
| tprintf("[%16lx] ", psw); |
| #endif |
| |
| #elif defined(X86_64) |
| long rip; |
| |
| if (upeek(tcp->pid, 8*RIP, &rip) < 0) { |
| PRINTBADPC; |
| return; |
| } |
| tprintf("[%16lx] ", rip); |
| #elif defined(IA64) |
| long ip; |
| |
| if (upeek(tcp->pid, PT_B0, &ip) < 0) { |
| PRINTBADPC; |
| return; |
| } |
| tprintf("[%08lx] ", ip); |
| #elif defined(POWERPC) |
| long pc; |
| |
| if (upeek(tcp->pid, sizeof(unsigned long)*PT_NIP, &pc) < 0) { |
| tprintf ("[????????] "); |
| return; |
| } |
| tprintf("[%08lx] ", pc); |
| #elif defined(M68K) |
| long pc; |
| |
| if (upeek(tcp->pid, 4*PT_PC, &pc) < 0) { |
| tprintf ("[????????] "); |
| return; |
| } |
| tprintf("[%08lx] ", pc); |
| #elif defined(ALPHA) |
| long pc; |
| |
| if (upeek(tcp->pid, REG_PC, &pc) < 0) { |
| tprintf ("[????????????????] "); |
| return; |
| } |
| tprintf("[%08lx] ", pc); |
| #elif defined(SPARC) || defined(SPARC64) |
| struct regs regs; |
| if (ptrace(PTRACE_GETREGS,tcp->pid,(char *)®s,0) < 0) { |
| PRINTBADPC; |
| return; |
| } |
| tprintf("[%08lx] ", regs.r_pc); |
| #elif defined(HPPA) |
| long pc; |
| |
| if(upeek(tcp->pid,PT_IAOQ0,&pc) < 0) { |
| tprintf ("[????????] "); |
| return; |
| } |
| tprintf("[%08lx] ", pc); |
| #elif defined(MIPS) |
| long pc; |
| |
| if (upeek(tcp->pid, REG_EPC, &pc) < 0) { |
| tprintf ("[????????] "); |
| return; |
| } |
| tprintf("[%08lx] ", pc); |
| #elif defined(SH) |
| long pc; |
| |
| if (upeek(tcp->pid, 4*REG_PC, &pc) < 0) { |
| tprintf ("[????????] "); |
| return; |
| } |
| tprintf("[%08lx] ", pc); |
| #elif defined(SH64) |
| long pc; |
| |
| if (upeek(tcp->pid, REG_PC, &pc) < 0) { |
| tprintf ("[????????????????] "); |
| return; |
| } |
| tprintf("[%08lx] ", pc); |
| #elif defined(ARM) |
| long pc; |
| |
| if (upeek(tcp->pid, 4*15, &pc) < 0) { |
| PRINTBADPC; |
| return; |
| } |
| tprintf("[%08lx] ", pc); |
| #endif /* !architecture */ |
| #endif /* LINUX */ |
| |
| #ifdef SUNOS4 |
| struct regs regs; |
| |
| if (ptrace(PTRACE_GETREGS, tcp->pid, (char *) ®s, 0) < 0) { |
| perror("printcall: ptrace(PTRACE_GETREGS, ...)"); |
| PRINTBADPC; |
| return; |
| } |
| tprintf("[%08x] ", regs.r_o7); |
| #endif /* SUNOS4 */ |
| |
| #ifdef SVR4 |
| /* XXX */ |
| PRINTBADPC; |
| #endif |
| |
| #ifdef FREEBSD |
| struct reg regs; |
| pread(tcp->pfd_reg, ®s, sizeof(regs), 0); |
| tprintf("[%08x] ", regs.r_eip); |
| #endif /* FREEBSD */ |
| } |
| |
| #ifndef USE_PROCFS |
| |
| #if defined LINUX |
| |
| #include <sys/syscall.h> |
| #ifndef CLONE_PTRACE |
| # define CLONE_PTRACE 0x00002000 |
| #endif |
| #ifndef CLONE_STOPPED |
| # define CLONE_STOPPED 0x02000000 |
| #endif |
| |
| #ifdef IA64 |
| |
| /* We don't have fork()/vfork() syscalls on ia64 itself, but the ia32 |
| subsystem has them for x86... */ |
| #define SYS_fork 2 |
| #define SYS_vfork 190 |
| |
| typedef unsigned long *arg_setup_state; |
| |
| static int |
| arg_setup(struct tcb *tcp, arg_setup_state *state) |
| { |
| unsigned long *bsp, cfm, sof, sol; |
| |
| if (ia32) |
| return 0; |
| |
| if (upeek(tcp->pid, PT_AR_BSP, (long *) &bsp) < 0) |
| return -1; |
| if (upeek(tcp->pid, PT_CFM, (long *) &cfm) < 0) |
| return -1; |
| |
| sof = (cfm >> 0) & 0x7f; |
| sol = (cfm >> 7) & 0x7f; |
| bsp = ia64_rse_skip_regs(bsp, -sof + sol); |
| |
| *state = bsp; |
| return 0; |
| } |
| |
| # define arg_finish_change(tcp, state) 0 |
| |
| #ifdef SYS_fork |
| static int |
| get_arg0 (struct tcb *tcp, arg_setup_state *state, long *valp) |
| { |
| int ret; |
| |
| if (ia32) |
| ret = upeek (tcp->pid, PT_R11, valp); |
| else |
| ret = umoven (tcp, |
| (unsigned long) ia64_rse_skip_regs(*state, 0), |
| sizeof(long), (void *) valp); |
| return ret; |
| } |
| |
| static int |
| get_arg1 (struct tcb *tcp, arg_setup_state *state, long *valp) |
| { |
| int ret; |
| |
| if (ia32) |
| ret = upeek (tcp->pid, PT_R9, valp); |
| else |
| ret = umoven (tcp, |
| (unsigned long) ia64_rse_skip_regs(*state, 1), |
| sizeof(long), (void *) valp); |
| return ret; |
| } |
| #endif |
| |
| static int |
| set_arg0 (struct tcb *tcp, arg_setup_state *state, long val) |
| { |
| int req = PTRACE_POKEDATA; |
| void *ap; |
| |
| if (ia32) { |
| ap = (void *) (intptr_t) PT_R11; /* r11 == EBX */ |
| req = PTRACE_POKEUSER; |
| } else |
| ap = ia64_rse_skip_regs(*state, 0); |
| errno = 0; |
| ptrace(req, tcp->pid, ap, val); |
| return errno ? -1 : 0; |
| } |
| |
| static int |
| set_arg1 (struct tcb *tcp, arg_setup_state *state, long val) |
| { |
| int req = PTRACE_POKEDATA; |
| void *ap; |
| |
| if (ia32) { |
| ap = (void *) (intptr_t) PT_R9; /* r9 == ECX */ |
| req = PTRACE_POKEUSER; |
| } else |
| ap = ia64_rse_skip_regs(*state, 1); |
| errno = 0; |
| ptrace(req, tcp->pid, ap, val); |
| return errno ? -1 : 0; |
| } |
| |
| #elif defined (SPARC) || defined (SPARC64) |
| |
| typedef struct regs arg_setup_state; |
| |
| # define arg_setup(tcp, state) \ |
| (ptrace (PTRACE_GETREGS, tcp->pid, (char *) (state), 0)) |
| # define arg_finish_change(tcp, state) \ |
| (ptrace (PTRACE_SETREGS, tcp->pid, (char *) (state), 0)) |
| |
| # define get_arg0(tcp, state, valp) (*(valp) = (state)->r_o0, 0) |
| # define get_arg1(tcp, state, valp) (*(valp) = (state)->r_o1, 0) |
| # define set_arg0(tcp, state, val) ((state)->r_o0 = (val), 0) |
| # define set_arg1(tcp, state, val) ((state)->r_o1 = (val), 0) |
| # define restore_arg0(tcp, state, val) 0 |
| |
| #else |
| |
| # if defined S390 || defined S390X |
| /* Note: this is only true for the `clone' system call, which handles |
| arguments specially. We could as well say that its first two arguments |
| are swapped relative to other architectures, but that would just be |
| another #ifdef in the calls. */ |
| # define arg0_offset PT_GPR3 |
| # define arg1_offset PT_ORIGGPR2 |
| # define restore_arg0(tcp, state, val) ((void) (state), 0) |
| # define restore_arg1(tcp, state, val) ((void) (state), 0) |
| # define arg0_index 1 |
| # define arg1_index 0 |
| # elif defined (ALPHA) || defined (MIPS) |
| # define arg0_offset REG_A0 |
| # define arg1_offset (REG_A0+1) |
| # elif defined (POWERPC) |
| # define arg0_offset (sizeof(unsigned long)*PT_R3) |
| # define arg1_offset (sizeof(unsigned long)*PT_R4) |
| # define restore_arg0(tcp, state, val) ((void) (state), 0) |
| # elif defined (HPPA) |
| # define arg0_offset PT_GR26 |
| # define arg1_offset (PT_GR26-4) |
| # elif defined (X86_64) |
| # define arg0_offset ((long)(8*(current_personality ? RBX : RDI))) |
| # define arg1_offset ((long)(8*(current_personality ? RCX : RSI))) |
| # elif defined (SH) |
| # define arg0_offset (4*(REG_REG0+4)) |
| # define arg1_offset (4*(REG_REG0+5)) |
| # elif defined (SH64) |
| /* ABI defines arg0 & 1 in r2 & r3 */ |
| # define arg0_offset (REG_OFFSET+16) |
| # define arg1_offset (REG_OFFSET+24) |
| # define restore_arg0(tcp, state, val) 0 |
| # else |
| # define arg0_offset 0 |
| # define arg1_offset 4 |
| # if defined ARM |
| # define restore_arg0(tcp, state, val) 0 |
| # endif |
| # endif |
| |
| typedef int arg_setup_state; |
| |
| # define arg_setup(tcp, state) (0) |
| # define arg_finish_change(tcp, state) 0 |
| # define get_arg0(tcp, cookie, valp) \ |
| (upeek ((tcp)->pid, arg0_offset, (valp))) |
| # define get_arg1(tcp, cookie, valp) \ |
| (upeek ((tcp)->pid, arg1_offset, (valp))) |
| |
| static int |
| set_arg0 (struct tcb *tcp, void *cookie, long val) |
| { |
| return ptrace (PTRACE_POKEUSER, tcp->pid, (char*)arg0_offset, val); |
| } |
| |
| static int |
| set_arg1 (struct tcb *tcp, void *cookie, long val) |
| { |
| return ptrace (PTRACE_POKEUSER, tcp->pid, (char*)arg1_offset, val); |
| } |
| |
| #endif |
| |
| #ifndef restore_arg0 |
| # define restore_arg0(tcp, state, val) set_arg0((tcp), (state), (val)) |
| #endif |
| #ifndef restore_arg1 |
| # define restore_arg1(tcp, state, val) set_arg1((tcp), (state), (val)) |
| #endif |
| |
| #ifndef arg0_index |
| # define arg0_index 0 |
| # define arg1_index 1 |
| #endif |
| |
| int |
| setbpt(tcp) |
| struct tcb *tcp; |
| { |
| extern int change_syscall(struct tcb *, int); |
| arg_setup_state state; |
| |
| if (tcp->flags & TCB_BPTSET) { |
| fprintf(stderr, "PANIC: TCB already set in pid %u\n", tcp->pid); |
| return -1; |
| } |
| |
| switch (known_scno(tcp)) { |
| #ifdef SYS_vfork |
| case SYS_vfork: |
| #endif |
| #ifdef SYS_fork |
| case SYS_fork: |
| #endif |
| #if defined SYS_fork || defined SYS_vfork |
| if (arg_setup (tcp, &state) < 0 |
| || get_arg0 (tcp, &state, &tcp->inst[0]) < 0 |
| || get_arg1 (tcp, &state, &tcp->inst[1]) < 0 |
| || change_syscall(tcp, SYS_clone) < 0 |
| || set_arg0 (tcp, &state, CLONE_PTRACE|SIGCHLD) < 0 |
| || set_arg1 (tcp, &state, 0) < 0 |
| || arg_finish_change (tcp, &state) < 0) |
| return -1; |
| tcp->u_arg[arg0_index] = CLONE_PTRACE|SIGCHLD; |
| tcp->u_arg[arg1_index] = 0; |
| tcp->flags |= TCB_BPTSET; |
| return 0; |
| #endif |
| |
| case SYS_clone: |
| #ifdef SYS_clone2 |
| case SYS_clone2: |
| #endif |
| if ((tcp->u_arg[arg0_index] & CLONE_PTRACE) == 0 |
| && (arg_setup (tcp, &state) < 0 |
| || set_arg0 (tcp, &state, |
| tcp->u_arg[arg0_index] | CLONE_PTRACE) < 0 |
| || arg_finish_change (tcp, &state) < 0)) |
| return -1; |
| tcp->flags |= TCB_BPTSET; |
| tcp->inst[0] = tcp->u_arg[arg0_index]; |
| tcp->inst[1] = tcp->u_arg[arg1_index]; |
| return 0; |
| |
| default: |
| fprintf(stderr, "PANIC: setbpt for syscall %ld on %u???\n", |
| tcp->scno, tcp->pid); |
| break; |
| } |
| |
| return -1; |
| } |
| |
| int |
| clearbpt(tcp) |
| struct tcb *tcp; |
| { |
| arg_setup_state state; |
| if (arg_setup (tcp, &state) < 0 |
| || restore_arg0 (tcp, &state, tcp->inst[0]) < 0 |
| || restore_arg1 (tcp, &state, tcp->inst[1]) < 0 |
| || arg_finish_change (tcp, &state)) |
| return -1; |
| tcp->flags &= ~TCB_BPTSET; |
| return 0; |
| } |
| |
| #else |
| |
| int |
| setbpt(tcp) |
| struct tcb *tcp; |
| { |
| |
| #ifdef LINUX |
| #if defined (SPARC) || defined (SPARC64) |
| /* We simply use the SunOS breakpoint code. */ |
| |
| struct regs regs; |
| unsigned long inst; |
| #define LOOPA 0x30800000 /* ba,a 0 */ |
| |
| if (tcp->flags & TCB_BPTSET) { |
| fprintf(stderr, "PANIC: TCB already set in pid %u\n", tcp->pid); |
| return -1; |
| } |
| if (ptrace(PTRACE_GETREGS, tcp->pid, (char *)®s, 0) < 0) { |
| perror("setbpt: ptrace(PTRACE_GETREGS, ...)"); |
| return -1; |
| } |
| tcp->baddr = regs.r_o7 + 8; |
| errno = 0; |
| tcp->inst[0] = ptrace(PTRACE_PEEKTEXT, tcp->pid, (char *)tcp->baddr, 0); |
| if(errno) { |
| perror("setbpt: ptrace(PTRACE_PEEKTEXT, ...)"); |
| return -1; |
| } |
| |
| /* |
| * XXX - BRUTAL MODE ON |
| * We cannot set a real BPT in the child, since it will not be |
| * traced at the moment it will reach the trap and would probably |
| * die with a core dump. |
| * Thus, we are force our way in by taking out two instructions |
| * and insert an eternal loop instead, in expectance of the SIGSTOP |
| * generated by out PTRACE_ATTACH. |
| * Of cause, if we evaporate ourselves in the middle of all this... |
| */ |
| errno = 0; |
| inst = LOOPA; |
| #if defined (SPARC64) |
| inst <<= 32; |
| inst |= (tcp->inst[0] & 0xffffffffUL); |
| #endif |
| ptrace(PTRACE_POKETEXT, tcp->pid, (char *) tcp->baddr, inst); |
| if(errno) { |
| perror("setbpt: ptrace(PTRACE_POKETEXT, ...)"); |
| return -1; |
| } |
| tcp->flags |= TCB_BPTSET; |
| |
| #else /* !SPARC && !SPARC64 */ |
| #ifdef IA64 |
| if (ia32) { |
| # define LOOP 0x0000feeb |
| if (tcp->flags & TCB_BPTSET) { |
| fprintf(stderr, "PANIC: bpt already set in pid %u\n", |
| tcp->pid); |
| return -1; |
| } |
| if (upeek(tcp->pid, PT_CR_IIP, &tcp->baddr) < 0) |
| return -1; |
| if (debug) |
| fprintf(stderr, "[%d] setting bpt at %lx\n", |
| tcp->pid, tcp->baddr); |
| tcp->inst[0] = ptrace(PTRACE_PEEKTEXT, tcp->pid, |
| (char *) tcp->baddr, 0); |
| if (errno) { |
| perror("setbpt: ptrace(PTRACE_PEEKTEXT, ...)"); |
| return -1; |
| } |
| ptrace(PTRACE_POKETEXT, tcp->pid, (char *) tcp->baddr, LOOP); |
| if (errno) { |
| perror("setbpt: ptrace(PTRACE_POKETEXT, ...)"); |
| return -1; |
| } |
| tcp->flags |= TCB_BPTSET; |
| } else { |
| /* |
| * Our strategy here is to replace the bundle that |
| * contained the clone() syscall with a bundle of the |
| * form: |
| * |
| * { 1: br 1b; br 1b; br 1b } |
| * |
| * This ensures that the newly forked child will loop |
| * endlessly until we've got a chance to attach to it. |
| */ |
| # define LOOP0 0x0000100000000017 |
| # define LOOP1 0x4000000000200000 |
| unsigned long addr, ipsr; |
| pid_t pid; |
| |
| pid = tcp->pid; |
| if (upeek(pid, PT_CR_IPSR, &ipsr) < 0) |
| return -1; |
| if (upeek(pid, PT_CR_IIP, &addr) < 0) |
| return -1; |
| /* store "ri" in low two bits */ |
| tcp->baddr = addr | ((ipsr >> 41) & 0x3); |
| |
| errno = 0; |
| tcp->inst[0] = ptrace(PTRACE_PEEKTEXT, pid, (char *) addr + 0, |
| 0); |
| tcp->inst[1] = ptrace(PTRACE_PEEKTEXT, pid, (char *) addr + 8, |
| 0); |
| if (errno) { |
| perror("setbpt: ptrace(PTRACE_PEEKTEXT, ...)"); |
| return -1; |
| } |
| |
| errno = 0; |
| ptrace(PTRACE_POKETEXT, pid, (char *) addr + 0, LOOP0); |
| ptrace(PTRACE_POKETEXT, pid, (char *) addr + 8, LOOP1); |
| if (errno) { |
| perror("setbpt: ptrace(PTRACE_POKETEXT, ...)"); |
| return -1; |
| } |
| tcp->flags |= TCB_BPTSET; |
| } |
| #else /* !IA64 */ |
| |
| #if defined (I386) || defined(X86_64) |
| #define LOOP 0x0000feeb |
| #elif defined (M68K) |
| #define LOOP 0x60fe0000 |
| #elif defined (ALPHA) |
| #define LOOP 0xc3ffffff |
| #elif defined (POWERPC) |
| #define LOOP 0x48000000 |
| #elif defined(ARM) |
| #define LOOP 0xEAFFFFFE |
| #elif defined(MIPS) |
| #define LOOP 0x1000ffff |
| #elif defined(S390) |
| #define LOOP 0xa7f40000 /* BRC 15,0 */ |
| #elif defined(S390X) |
| #define LOOP 0xa7f4000000000000UL /* BRC 15,0 */ |
| #elif defined(HPPA) |
| #define LOOP 0xe81f1ff7 /* b,l,n <loc>,r0 */ |
| #elif defined(SH) |
| #ifdef __LITTLE_ENDIAN__ |
| #define LOOP 0x0000affe |
| #else |
| #define LOOP 0xfeaf0000 |
| #endif |
| #else |
| #error unknown architecture |
| #endif |
| |
| if (tcp->flags & TCB_BPTSET) { |
| fprintf(stderr, "PANIC: bpt already set in pid %u\n", tcp->pid); |
| return -1; |
| } |
| #if defined (I386) |
| if (upeek(tcp->pid, 4*EIP, &tcp->baddr) < 0) |
| return -1; |
| #elif defined (X86_64) |
| if (upeek(tcp->pid, 8*RIP, &tcp->baddr) < 0) |
| return -1; |
| #elif defined (M68K) |
| if (upeek(tcp->pid, 4*PT_PC, &tcp->baddr) < 0) |
| return -1; |
| #elif defined (ALPHA) |
| return -1; |
| #elif defined (ARM) |
| return -1; |
| #elif defined (MIPS) |
| return -1; /* FIXME: I do not know what i do - Flo */ |
| #elif defined (POWERPC) |
| if (upeek(tcp->pid, sizeof(unsigned long)*PT_NIP, &tcp->baddr) < 0) |
| return -1; |
| #elif defined(S390) || defined(S390X) |
| if (upeek(tcp->pid,PT_PSWADDR, &tcp->baddr) < 0) |
| return -1; |
| #elif defined(HPPA) |
| if (upeek(tcp->pid, PT_IAOQ0, &tcp->baddr) < 0) |
| return -1; |
| tcp->baddr &= ~0x03; |
| #elif defined(SH) |
| if (upeek(tcp->pid, 4*REG_PC, &tcp->baddr) < 0) |
| return -1; |
| #else |
| #error unknown architecture |
| #endif |
| if (debug) |
| fprintf(stderr, "[%d] setting bpt at %lx\n", tcp->pid, tcp->baddr); |
| tcp->inst[0] = ptrace(PTRACE_PEEKTEXT, tcp->pid, (char *) tcp->baddr, 0); |
| if (errno) { |
| perror("setbpt: ptrace(PTRACE_PEEKTEXT, ...)"); |
| return -1; |
| } |
| ptrace(PTRACE_POKETEXT, tcp->pid, (char *) tcp->baddr, LOOP); |
| if (errno) { |
| perror("setbpt: ptrace(PTRACE_POKETEXT, ...)"); |
| return -1; |
| } |
| tcp->flags |= TCB_BPTSET; |
| |
| #endif /* !IA64 */ |
| #endif /* SPARC || SPARC64 */ |
| #endif /* LINUX */ |
| |
| #ifdef SUNOS4 |
| #ifdef SPARC /* This code is slightly sparc specific */ |
| |
| struct regs regs; |
| #define BPT 0x91d02001 /* ta 1 */ |
| #define LOOP 0x10800000 /* ba 0 */ |
| #define LOOPA 0x30800000 /* ba,a 0 */ |
| #define NOP 0x01000000 |
| #if LOOPA |
| static int loopdeloop[1] = {LOOPA}; |
| #else |
| static int loopdeloop[2] = {LOOP, NOP}; |
| #endif |
| |
| if (tcp->flags & TCB_BPTSET) { |
| fprintf(stderr, "PANIC: TCB already set in pid %u\n", tcp->pid); |
| return -1; |
| } |
| if (ptrace(PTRACE_GETREGS, tcp->pid, (char *)®s, 0) < 0) { |
| perror("setbpt: ptrace(PTRACE_GETREGS, ...)"); |
| return -1; |
| } |
| tcp->baddr = regs.r_o7 + 8; |
| if (ptrace(PTRACE_READTEXT, tcp->pid, (char *)tcp->baddr, |
| sizeof tcp->inst, (char *)tcp->inst) < 0) { |
| perror("setbpt: ptrace(PTRACE_READTEXT, ...)"); |
| return -1; |
| } |
| |
| /* |
| * XXX - BRUTAL MODE ON |
| * We cannot set a real BPT in the child, since it will not be |
| * traced at the moment it will reach the trap and would probably |
| * die with a core dump. |
| * Thus, we are force our way in by taking out two instructions |
| * and insert an eternal loop in stead, in expectance of the SIGSTOP |
| * generated by out PTRACE_ATTACH. |
| * Of cause, if we evaporate ourselves in the middle of all this... |
| */ |
| if (ptrace(PTRACE_WRITETEXT, tcp->pid, (char *) tcp->baddr, |
| sizeof loopdeloop, (char *) loopdeloop) < 0) { |
| perror("setbpt: ptrace(PTRACE_WRITETEXT, ...)"); |
| return -1; |
| } |
| tcp->flags |= TCB_BPTSET; |
| |
| #endif /* SPARC */ |
| #endif /* SUNOS4 */ |
| |
| return 0; |
| } |
| |
| int |
| clearbpt(tcp) |
| struct tcb *tcp; |
| { |
| |
| #ifdef LINUX |
| #if defined(I386) || defined(X86_64) |
| long eip; |
| #elif defined(POWERPC) |
| long pc; |
| #elif defined(M68K) |
| long pc; |
| #elif defined(ALPHA) |
| long pc; |
| #elif defined(HPPA) |
| long iaoq; |
| #elif defined(SH) |
| long pc; |
| #endif /* architecture */ |
| |
| #if defined (SPARC) || defined (SPARC64) |
| /* Again, we borrow the SunOS breakpoint code. */ |
| if (!(tcp->flags & TCB_BPTSET)) { |
| fprintf(stderr, "PANIC: TCB not set in pid %u\n", tcp->pid); |
| return -1; |
| } |
| errno = 0; |
| ptrace(PTRACE_POKETEXT, tcp->pid, (char *) tcp->baddr, tcp->inst[0]); |
| if(errno) { |
| perror("clearbtp: ptrace(PTRACE_POKETEXT, ...)"); |
| return -1; |
| } |
| tcp->flags &= ~TCB_BPTSET; |
| #elif defined(IA64) |
| if (ia32) { |
| unsigned long addr; |
| |
| if (debug) |
| fprintf(stderr, "[%d] clearing bpt\n", tcp->pid); |
| if (!(tcp->flags & TCB_BPTSET)) { |
| fprintf(stderr, "PANIC: TCB not set in pid %u\n", tcp->pid); |
| return -1; |
| } |
| errno = 0; |
| ptrace(PTRACE_POKETEXT, tcp->pid, (char *) tcp->baddr, tcp->inst[0]); |
| if (errno) { |
| perror("clearbtp: ptrace(PTRACE_POKETEXT, ...)"); |
| return -1; |
| } |
| tcp->flags &= ~TCB_BPTSET; |
| |
| if (upeek(tcp->pid, PT_CR_IIP, &addr) < 0) |
| return -1; |
| if (addr != tcp->baddr) { |
| /* The breakpoint has not been reached yet. */ |
| if (debug) |
| fprintf(stderr, |
| "NOTE: PC not at bpt (pc %#lx baddr %#lx)\n", |
| addr, tcp->baddr); |
| return 0; |
| } |
| } else { |
| unsigned long addr, ipsr; |
| pid_t pid; |
| |
| pid = tcp->pid; |
| |
| if (upeek(pid, PT_CR_IPSR, &ipsr) < 0) |
| return -1; |
| if (upeek(pid, PT_CR_IIP, &addr) < 0) |
| return -1; |
| |
| /* restore original bundle: */ |
| errno = 0; |
| ptrace(PTRACE_POKETEXT, pid, (char *) addr + 0, tcp->inst[0]); |
| ptrace(PTRACE_POKETEXT, pid, (char *) addr + 8, tcp->inst[1]); |
| if (errno) { |
| perror("clearbpt: ptrace(PTRACE_POKETEXT, ...)"); |
| return -1; |
| } |
| |
| /* restore original "ri" in ipsr: */ |
| ipsr = (ipsr & ~(0x3ul << 41)) | ((tcp->baddr & 0x3) << 41); |
| errno = 0; |
| ptrace(PTRACE_POKEUSER, pid, (char *) PT_CR_IPSR, ipsr); |
| if (errno) { |
| perror("clrbpt: ptrace(PTRACE_POKEUSER, ...)"); |
| return -1; |
| } |
| |
| tcp->flags &= ~TCB_BPTSET; |
| |
| if (addr != (tcp->baddr & ~0x3)) { |
| /* the breakpoint has not been reached yet. */ |
| if (debug) |
| fprintf(stderr, "NOTE: PC not at bpt (pc %#lx baddr %#lx)\n", |
| addr, tcp->baddr); |
| return 0; |
| } |
| } |
| #else /* !IA64 && !SPARC && !SPARC64 */ |
| |
| if (debug) |
| fprintf(stderr, "[%d] clearing bpt\n", tcp->pid); |
| if (!(tcp->flags & TCB_BPTSET)) { |
| fprintf(stderr, "PANIC: TCB not set in pid %u\n", tcp->pid); |
| return -1; |
| } |
| errno = 0; |
| ptrace(PTRACE_POKETEXT, tcp->pid, (char *) tcp->baddr, tcp->inst[0]); |
| if (errno) { |
| perror("clearbtp: ptrace(PTRACE_POKETEXT, ...)"); |
| return -1; |
| } |
| tcp->flags &= ~TCB_BPTSET; |
| |
| #ifdef I386 |
| if (upeek(tcp->pid, 4*EIP, &eip) < 0) |
| return -1; |
| if (eip != tcp->baddr) { |
| /* The breakpoint has not been reached yet. */ |
| if (debug) |
| fprintf(stderr, |
| "NOTE: PC not at bpt (pc %#lx baddr %#lx)\n", |
| eip, tcp->baddr); |
| return 0; |
| } |
| #elif defined(X86_64) |
| if (upeek(tcp->pid, 8*RIP, &eip) < 0) |
| return -1; |
| if (eip != tcp->baddr) { |
| /* The breakpoint has not been reached yet. */ |
| if (debug) |
| fprintf(stderr, |
| "NOTE: PC not at bpt (pc %#lx baddr %#lx)\n", |
| eip, tcp->baddr); |
| return 0; |
| } |
| #elif defined(POWERPC) |
| if (upeek(tcp->pid, sizeof(unsigned long)*PT_NIP, &pc) < 0) |
| return -1; |
| if (pc != tcp->baddr) { |
| /* The breakpoint has not been reached yet. */ |
| if (debug) |
| fprintf(stderr, "NOTE: PC not at bpt (pc %#lx baddr %#lx)\n", |
| pc, tcp->baddr); |
| return 0; |
| } |
| #elif defined(M68K) |
| if (upeek(tcp->pid, 4*PT_PC, &pc) < 0) |
| return -1; |
| if (pc != tcp->baddr) { |
| /* The breakpoint has not been reached yet. */ |
| if (debug) |
| fprintf(stderr, "NOTE: PC not at bpt (pc %#lx baddr %#lx)\n", |
| pc, tcp->baddr); |
| return 0; |
| } |
| #elif defined(ALPHA) |
| if (upeek(tcp->pid, REG_PC, &pc) < 0) |
| return -1; |
| if (pc != tcp->baddr) { |
| /* The breakpoint has not been reached yet. */ |
| if (debug) |
| fprintf(stderr, "NOTE: PC not at bpt (pc %#lx baddr %#lx)\n", |
| pc, tcp->baddr); |
| return 0; |
| } |
| #elif defined(HPPA) |
| if (upeek(tcp->pid, PT_IAOQ0, &iaoq) < 0) |
| return -1; |
| iaoq &= ~0x03; |
| if (iaoq != tcp->baddr && iaoq != tcp->baddr + 4) { |
| /* The breakpoint has not been reached yet. */ |
| if (debug) |
| fprintf(stderr, "NOTE: PC not at bpt (iaoq %#lx baddr %#lx)\n", |
| iaoq, tcp->baddr); |
| return 0; |
| } |
| iaoq = tcp->baddr | 3; |
| /* We should be pointing at a 'ldi -1000,r1' in glibc, so it is |
| * safe to set both IAOQ0 and IAOQ1 to that so the PSW N bit |
| * has no significant effect. |
| */ |
| ptrace(PTRACE_POKEUSER, tcp->pid, (void *)PT_IAOQ0, iaoq); |
| ptrace(PTRACE_POKEUSER, tcp->pid, (void *)PT_IAOQ1, iaoq); |
| #elif defined(SH) |
| if (upeek(tcp->pid, 4*REG_PC, &pc) < 0) |
| return -1; |
| if (pc != tcp->baddr) { |
| /* The breakpoint has not been reached yet. */ |
| if (debug) |
| fprintf(stderr, "NOTE: PC not at bpt (pc %#lx baddr %#lx)\n", |
| pc, tcp->baddr); |
| return 0; |
| } |
| |
| #endif /* arch */ |
| #endif /* !SPARC && !SPARC64 && !IA64 */ |
| #endif /* LINUX */ |
| |
| #ifdef SUNOS4 |
| #ifdef SPARC |
| |
| #if !LOOPA |
| struct regs regs; |
| #endif |
| |
| if (!(tcp->flags & TCB_BPTSET)) { |
| fprintf(stderr, "PANIC: TCB not set in pid %u\n", tcp->pid); |
| return -1; |
| } |
| if (ptrace(PTRACE_WRITETEXT, tcp->pid, (char *) tcp->baddr, |
| sizeof tcp->inst, (char *) tcp->inst) < 0) { |
| perror("clearbtp: ptrace(PTRACE_WRITETEXT, ...)"); |
| return -1; |
| } |
| tcp->flags &= ~TCB_BPTSET; |
| |
| #if !LOOPA |
| /* |
| * Since we don't have a single instruction breakpoint, we may have |
| * to adjust the program counter after removing the our `breakpoint'. |
| */ |
| if (ptrace(PTRACE_GETREGS, tcp->pid, (char *)®s, 0) < 0) { |
| perror("clearbpt: ptrace(PTRACE_GETREGS, ...)"); |
| return -1; |
| } |
| if ((regs.r_pc < tcp->baddr) || |
| (regs.r_pc > tcp->baddr + 4)) { |
| /* The breakpoint has not been reached yet */ |
| if (debug) |
| fprintf(stderr, |
| "NOTE: PC not at bpt (pc %#x baddr %#x)\n", |
| regs.r_pc, tcp->parent->baddr); |
| return 0; |
| } |
| if (regs.r_pc != tcp->baddr) |
| if (debug) |
| fprintf(stderr, "NOTE: PC adjusted (%#x -> %#x\n", |
| regs.r_pc, tcp->baddr); |
| |
| regs.r_pc = tcp->baddr; |
| if (ptrace(PTRACE_SETREGS, tcp->pid, (char *)®s, 0) < 0) { |
| perror("clearbpt: ptrace(PTRACE_SETREGS, ...)"); |
| return -1; |
| } |
| #endif /* LOOPA */ |
| #endif /* SPARC */ |
| #endif /* SUNOS4 */ |
| |
| return 0; |
| } |
| |
| #endif |
| |
| #endif /* !USE_PROCFS */ |
| |
| #ifdef SUNOS4 |
| |
| static int |
| getex(pid, hdr) |
| int pid; |
| struct exec *hdr; |
| { |
| int n; |
| |
| for (n = 0; n < sizeof *hdr; n += 4) { |
| long res; |
| if (upeek(pid, uoff(u_exdata) + n, &res) < 0) |
| return -1; |
| memcpy(((char *) hdr) + n, &res, 4); |
| } |
| if (debug) { |
| fprintf(stderr, "[struct exec: magic: %o version %u Mach %o\n", |
| hdr->a_magic, hdr->a_toolversion, hdr->a_machtype); |
| fprintf(stderr, "Text %lu Data %lu Bss %lu Syms %lu Entry %#lx]\n", |
| hdr->a_text, hdr->a_data, hdr->a_bss, hdr->a_syms, hdr->a_entry); |
| } |
| return 0; |
| } |
| |
| int |
| fixvfork(tcp) |
| struct tcb *tcp; |
| { |
| int pid = tcp->pid; |
| /* |
| * Change `vfork' in a freshly exec'ed dynamically linked |
| * executable's (internal) symbol table to plain old `fork' |
| */ |
| |
| struct exec hdr; |
| struct link_dynamic dyn; |
| struct link_dynamic_2 ld; |
| char *strtab, *cp; |
| |
| if (getex(pid, &hdr) < 0) |
| return -1; |
| if (!hdr.a_dynamic) |
| return -1; |
| |
| if (umove(tcp, (int) N_DATADDR(hdr), &dyn) < 0) { |
| fprintf(stderr, "Cannot read DYNAMIC\n"); |
| return -1; |
| } |
| if (umove(tcp, (int) dyn.ld_un.ld_2, &ld) < 0) { |
| fprintf(stderr, "Cannot read link_dynamic_2\n"); |
| return -1; |
| } |
| if ((strtab = malloc((unsigned)ld.ld_symb_size)) == NULL) { |
| fprintf(stderr, "out of memory\n"); |
| return -1; |
| } |
| if (umoven(tcp, (int)ld.ld_symbols+(int)N_TXTADDR(hdr), |
| (int)ld.ld_symb_size, strtab) < 0) |
| goto err; |
| |
| #if 0 |
| for (cp = strtab; cp < strtab + ld.ld_symb_size; ) { |
| fprintf(stderr, "[symbol: %s]\n", cp); |
| cp += strlen(cp)+1; |
| } |
| return 0; |
| #endif |
| for (cp = strtab; cp < strtab + ld.ld_symb_size; ) { |
| if (strcmp(cp, "_vfork") == 0) { |
| if (debug) |
| fprintf(stderr, "fixvfork: FOUND _vfork\n"); |
| strcpy(cp, "_fork"); |
| break; |
| } |
| cp += strlen(cp)+1; |
| } |
| if (cp < strtab + ld.ld_symb_size) |
| /* |
| * Write entire symbol table back to avoid |
| * memory alignment bugs in ptrace |
| */ |
| if (tload(pid, (int)ld.ld_symbols+(int)N_TXTADDR(hdr), |
| (int)ld.ld_symb_size, strtab) < 0) |
| goto err; |
| |
| free(strtab); |
| return 0; |
| |
| err: |
| free(strtab); |
| return -1; |
| } |
| |
| #endif /* SUNOS4 */ |