| $Header: /tcpdump/master/tcpdump/CHANGES,v 1.87.2.17 2007/09/13 13:39:44 ken Exp $ |
| |
| Mon. September 10, 2007. ken@xelerance.com. Summary for 0.9.8 tcpdump release |
| Rework ARP printer |
| Rework OSPFv3 printer |
| Add support for Frame-Relay ARP |
| Decode DHCP Option 121 (RFC 3442 Classless Static Route) |
| Decode DHCP Option 249 (MS Classless Static Route) the same as Option 121 |
| TLV: Add support for Juniper .pcap extensions |
| Print EGP header in new-world-order style |
| Converted print-isakmp.c to NETDISSECT |
| Moved AF specific stuff into af.h |
| Test subsystem now table driven, and saves outputs and diffs to one place |
| Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted |
| libpcap files on an OS other than where the file was generated |
| |
| Wed. July 23, 2007. mcr@xelerance.com. Summary for 0.9.7 tcpdump release |
| |
| NFS: Print unsigned values as such. |
| RX: parse safely. |
| BGP: fixes for IPv6-less builds. |
| 801.1ag: use standard codepoint. |
| use /dev/bpf on systems with such a device. |
| 802.11: print QoS data, avoid dissect of no-data frame, ignore padding. |
| smb: make sure that we haven't gone past the end of the captured data. |
| smb: squelch an uninitialized complaint from coverity. |
| NFS: from NetBSD; don't interpret the reply as a possible NFS reply |
| if it got MSG_DENIED. |
| BGP: don't print TLV values that didn't fit, from www.digit-labs.org. |
| revised INSTALL.txt about libpcap dependancy. |
| |
| Wed. April 25, 2007. ken@xelerance.com. Summary for 3.9.6 tcpdump release |
| Update man page to reflect changes to libpcap |
| Changes to both TCP and IP Printer Output |
| Fix a potential buffer overflow in the 802.11 printer |
| Print basic info about a few more Cisco LAN protocols. |
| mDNS cleanup |
| ICMP MPLS rework of the extension code |
| bugfix: use the correct codepoint for the OSPF simple text auth token |
| entry, and use safeputs to print the password. |
| Add support in pflog for additional values |
| Add support for OIF RSVP Extensions UNI 1.0 Rev. 2 and additional RSVP objects |
| Add support for the Message-id NACK c-type. |
| Add support for 802.3ah loopback ctrl msg |
| Add support for Multiple-STP as per 802.1s |
| Add support for rapid-SPT as per 802.1w |
| Add support for CFM Link-trace msg, Link-trace-Reply msg, |
| Sender-ID tlv, private tlv, port, interface status |
| Add support for unidirectional link detection as per |
| http://www.ietf.org/internet-drafts/draft-foschiano-udld-02.txt |
| Add support for the olsr protocol as per RFC 3626 plus the LQ |
| extensions from olsr.org |
| Add support for variable-length checksum in DCCP, as per section 9 of |
| RFC 4340. |
| Add support for per-VLAN spanning tree and per-VLAN rapid spanning tree |
| Add support for Multiple-STP as per 802.1s |
| Add support for the cisco propriatry 'dynamic trunking protocol' |
| Add support for the cisco proprietary VTP protocol |
| Update dhcp6 options table as per IETF standardization activities |
| |
| |
| Tue. September 19, 2006. ken@xelerance.com. Summary for 3.9.5 tcpdump release |
| |
| Fix compiling on AIX (, at end of ENUM) |
| Updated list of DNS RR typecodes |
| Use local Ethernet defs on WIN32 |
| Add support for Frame-Relay ARP |
| Fixes for compiling under MSVC++ |
| Add support for parsing Juniper .pcap files |
| Add support for FRF.16 Multilink Frame-Relay (DLT_MFR) |
| Rework the OSPFv3 printer |
| Fix printing for 4.4BSD/NetBSD NFS Filehandles |
| Add support for Cisco style NLPID encapsulation |
| Add cisco prop. eigrp related, extended communities |
| Add support for BGP signaled VPLS |
| Cleanup the bootp printer |
| Add support for PPP over Frame-Relay |
| Add some bounds checking to the IP options code, and clean up |
| the options output a bit. |
| Add additional modp groups to ISAKMP printer |
| Add support for Address-Withdraw and Label-Withdraw Msgs |
| Add support for the BFD Discriminator TLV |
| Fixes for 64bit compiling |
| Add support for PIMv2 checksum verification |
| Add support for further dissection of the IPCP Compression Option |
| Add support for Cisco's proposed VQP protocol |
| Add basic support for keyed authentication TCP option |
| Lots of minor cosmetic changes to output printers |
| |
| |
| Mon. September 19, 2005. ken@xelerance.com. Summary for 3.9.4 tcpdump release |
| Decoder support for more Juniper link-layer types |
| Fix a potential buffer overflow (although it can't occur in |
| practice). |
| Fix the handling of unknown management frame types in the 802.11 |
| printer. |
| Add FRF.16 support, fix various Frame Relay bugs. |
| Add support for RSVP integrity objects, update fast-reroute |
| object printer to latest spec. |
| Clean up documentation of vlan filter expression, document mpls |
| filter expression. |
| Document new pppoed and pppoes filter expressions. |
| Update diffserver-TE codepoints as per RFC 4124. |
| Spelling fixes in ICMPv6. |
| Don't require any fields other than flags to be present in IS-IS |
| restart signaling TLVs, and only print the system ID in |
| those TLVs as system IDs, not as node IDs. |
| Support for DCCP. |
| |
| Tue. July 5, 2005. ken@xelerance.com. Summary for 3.9.3 tcpdump release |
| |
| Option to chroot() when dropping privs |
| Fixes for compiling on nearly every platform, |
| including improved 64bit support |
| Many new testcases |
| Support for sending packets |
| Many compliation fixes on most platforms |
| Fixes for recent version of GCC to eliminate warnings |
| Improved Unicode support |
| |
| Decoders & DLT Changes, Updates and New: |
| AES ESP support |
| Juniper ATM, FRF.15, FRF.16, PPPoE, |
| ML-FR, ML-PIC, ML-PPP, PL-PPP, LS-PIC |
| GGSN,ES,MONITOR,SERVICES |
| L2VPN |
| Axent Raptor/Symantec Firewall |
| TCP-MD5 (RFC 2385) |
| ESP-in-UDP (RFC 3948) |
| ATM OAM |
| LMP, LMP Service Discovery |
| IP over FC |
| IP over IEEE 1394 |
| BACnet MS/TP |
| SS7 |
| LDP over TCP |
| LACP, MARKER as per 802.3ad |
| PGM (RFC 3208) |
| LSP-PING |
| G.7041/Y.1303 Generic Framing Procedure |
| EIGRP-IP, EIGRP-IPX |
| ICMP6 |
| Radio - via radiotap |
| DHCPv6 |
| HDLC over PPP |
| |
| Tue. March 30, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.3 release |
| |
| No changes from 3.8.2. Version bumped only to maintain consistency |
| with libpcap 0.8.3. |
| |
| Mon. March 29, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.2 release |
| |
| Fixes for print-isakmp.c CVE: CAN-2004-0183, CAN-2004-0184 |
| http://www.rapid7.com/advisories/R7-0017.html |
| IP-over-IEEE1394 printing. |
| some MINGW32 changes. |
| updates for autoconf 2.5 |
| fixes for print-aodv.c - check for too short packets |
| formatting changes to print-ascii for hex output. |
| check for too short packets: print-bgp.c, print-bootp.c, print-cdp.c, |
| print-chdlc.c, print-domain.c, print-icmp.c, print-icmp6.c, |
| print-ip.c, print-lwres.c, print-ospf.c, print-pim.c, |
| print-ppp.c,print-pppoe.c, print-rsvp.c, print-wb.c |
| print-ether.c - better handling of unknown types. |
| print-isoclns.c - additional decoding of types. |
| print-llc.c - strings for LLC names added. |
| print-pfloc.c - various enhancements |
| print-radius.c - better decoding to strings. |
| |
| Wed. November 12, 2003. mcr@sandelman.ottawa.on.ca. Summary for 3.8 release |
| |
| changed syntax of -E argument so that multiple SAs can be decrypted |
| fixes for Digital Unix headers and Documentation |
| __attribute__ fixes |
| CDP changes from Terry Kennedy <terry@tmk.com>. |
| IPv6 mobility updates from Kazushi Sugyo <sugyo@pb.jp.nec.com> |
| Fixes for ASN.1 decoder for 2.100.3 forms. |
| Added a count of packets received and processed to clarify numbers. |
| Incorporated WinDUMP patches for Win32 builds. |
| PPPoE payload length headers. |
| Fixes for HP C compiler builds. |
| Use new pcap_breakloop() and pcap_findalldevs() if we can. |
| BGP output split into multiple lines. |
| Fixes to 802.11 decoding. |
| Fixes to PIM decoder. |
| SuperH is a CPU that can't handle unaligned access. Many fixes for |
| unaligned access work. |
| Fixes to Frame-Relay decoder for Q.933/922 frames. |
| Clarified when Solaris can do captures as non-root. |
| Added tests/ subdir for examples/regression tests. |
| New -U flag. -flush stdout after every packet |
| New -A flag -print ascii only |
| support for decoding IS-IS inside Cisco HDLC Frames |
| more verbosity for tftp decoder |
| mDNS decoder |
| new BFD decoder |
| cross compilation patches |
| RFC 3561 AODV support. |
| UDP/TCP pseudo-checksum properly for source-route options. |
| sanitized all files to modified BSD license |
| Add support for RFC 2625 IP-over-Fibre Channel. |
| fixes for DECnet support. |
| Support RFC 2684 bridging of Ethernet, 802.5 Token Ring, and FDDI. |
| RFC 2684 encapsulation of BPDUs. |
| |
| Tuesday, February 25, 2003. fenner@research.att.com. 3.7.2 release |
| |
| Fixed infinite loop when parsing malformed isakmp packets. |
| (reported by iDefense; already fixed in CVS) |
| Fixed infinite loop when parsing malformed BGP packets. |
| Fixed buffer overflow with certain malformed NFS packets. |
| Pretty-print unprintable network names in 802.11 printer. |
| Handle truncated nbp (appletalk) packets. |
| Updated DHCPv6 printer to match draft-ietf-dhc-dhcpv6-22.txt |
| Print IP protocol name even if we don't have a printer for it. |
| Print IP protocol name or number for fragments. |
| Print the whole MPLS label stack, not just the top label. |
| Print request header and file handle for NFS v3 FSINFO and PATHCONF |
| requests. |
| Fix NFS packet truncation checks. |
| Handle "old" DR-Priority and Bidir-Capable PIM HELLO options. |
| Handle unknown RADIUS attributes properly. |
| Fix an ASN.1 parsing error that would cause e.g. the OID |
| 2.100.3 to be misrepresented as 4.20.3 . |
| |
| Monday, January 21, 2002. mcr@sandelman.ottawa.on.ca. Summary for 3.7 release |
| see http://www.tcpdump.org/cvs-log/2002-01-21.10:16:48.html for commit log. |
| keyword "ipx" added. |
| Better OSI/802.2 support on Linux. |
| IEEE 802.11 support, from clenahan@fortresstech.com, achirica@ttd.net. |
| LLC SAP support for FDDI/token ring/RFC-1483 style ATM |
| BXXP protocol was replaced by the BEEP protocol; |
| improvements to SNAP demux. |
| Changes to "any" interface documentation. |
| Documentation on pcap_stats() counters. |
| Fix a memory leak found by Miklos Szeredi - pcap_ether_aton(). |
| Added MPLS encapsulation decoding per RFC3032. |
| DNS dissector handles TKEY, TSIG and IXFR. |
| adaptive SLIP interface patch from Igor Khristophorov <igor@atdot.org> |
| SMB printing has much improved bounds checks |
| OUI 0x0000f8 decoded as encapsulated ethernet for Cisco-custom bridging |
| Zephyr support, from Nickolai Zeldovich <kolya@MIT.EDU>. |
| Solaris - devices with digits in them. Stefan Hudson <hudson@mbay.net> |
| IPX socket 0x85be is for Cisco EIGRP over IPX. |
| Improvements to fragmented ESP handling. |
| SCTP support from Armando L. Caro Jr. <acaro@mail.eecis.udel.edu> |
| Linux ARPHDR_ATM support fixed. |
| Added a "netbeui" keyword, which selects NetBEUI packets. |
| IPv6 ND improvements, MobileIP dissector, 2292bis-02 for RA option. |
| Handle ARPHDR_HDLC from Marcus Felipe Pereira <marcus@task.com.br>. |
| Handle IPX socket 0x553 -> NetBIOS-over-IPX socket, "nwlink-dgm" |
| Better Linux libc5 compat. |
| BIND9 lwres dissector added. |
| MIPS and SPARC get strict alignment macros (affects print-bgp.c) |
| Apple LocalTalk LINKTYPE_ reserved. |
| New time stamp formats documented. |
| DHCP6 updated to draft-22.txt spec. |
| ICMP types/codes now accept symbolic names. |
| Add SIGINFO handler from LBL |
| encrypted CIPE tunnels in IRIX, from Franz Schaefer <schaefer@mond.at>. |
| now we are -Wstrict-prototype clean. |
| NetBSD DLT_PPP_ETHER; adapted from Martin Husemann <martin@netbsd.org>. |
| PPPoE dissector cleaned up. |
| Support for LocalTalk hardware, from Uns Lider <unslider@miranda.org>. |
| In dissector, now the caller prints the IP addresses rather than proto. |
| cjclark@alum.mit.edu: print the IP proto for non-initial fragments. |
| LLC frames with a DSAP and LSAP of 0xe0 are IPX frames. |
| Linux cooked frames with a type value of LINUX_SLL_P_802_3 are IPX. |
| captures on the "any" device won't be done in promiscuous mode |
| Token Ring support on DLPI - Onno van der Linden <onno@simplex.nl> |
| ARCNet support, from NetBSD. |
| HSRP dissector, from Julian Cowley <julian@lava.net>. |
| Handle (GRE-encapsulated) PPTP |
| added -C option to rotate save file every optarg * 1,000,000 bytes. |
| support for "vrrp" name - NetBSD, by Klaus Klein <kleink@netbsd.org>. |
| PPTP support, from Motonori Shindo <mshindo@mshindo.net>. |
| IS-IS over PPP support, from Hannes Gredler <hannes@juniper.net>. |
| CNFP support for IPv6,format. Harry Raaymakers <harryr@connect.com.au>. |
| ESP printing updated to RFC2406. |
| HP-UX can now handle large number of PPAs. |
| MSDP printer added. |
| L2TP dissector improvements from Motonori Shindo. |
| |
| Tuesday January 9, 2001. mcr@sandelman.ottawa.on.ca. Summary for 3.6 release |
| Cleaned up documentation. |
| Promisc mode fixes for Linux |
| IPsec changes/cleanups. |
| Alignment fixes for picky architectures |
| |
| Removed dependency on native headers for packet dissectors. |
| Removed Linux specific headers that were shipped |
| |
| libpcap changes provide for exchanging capture files between |
| systems. Save files now have well known PACKET_ values instead of |
| depending upon system dependant mappings of DLT_* types. |
| |
| Support for computing/checking IP and UDP/TCP checksums. |
| |
| Updated autoconf stock files. |
| |
| IPv6 improvements: dhcp (draft-15), mobile-ip6, ppp, ospf6, |
| |
| Added dissector support for: ISOCLNS, Token Ring, IGMPv3, bxxp, |
| timed, vrrp, radius, chdlc, cnfp, cdp, IEEE802.1d, raw-AppleTalk |
| |
| Added filtering support for: VLANs, ESIS, ISIS |
| |
| Improvements to: print-telnet, IPTalk, bootp/dhcp, ECN, PPP, |
| L2TP, PPPoE |
| |
| HP-UX 11.0 -- find the right dlpi device. |
| Solaris 8 - IPv6 works |
| Linux - Added support for an "any" device to capture on all interfaces |
| |
| Security fixes: buffer overrun audit done. Strcpy replaced with |
| strlcpy, sprintf replaced with snprintf. |
| Look for lex problems, and warn about them. |
| |
| |
| v3.5 Fri Jan 28 18:00:00 PST 2000 |
| |
| Bill Fenner <fenner@research.att.com> |
| - switch to config.h for autoconf |
| - unify RCSID strings |
| - Updated PIMv1, PIMv2, DVMRP, IGMP parsers, add Cisco Auto-RP parser |
| - Really fix the RIP printer |
| - Fix MAC address -> name translation. |
| - some -Wall -Wformat fixes |
| - update makemib to parse much of SMIv2 |
| - Print TCP sequence # with -vv even if you normally wouldn't |
| - Print as much of IP/TCP/UDP headers as possible even if truncated. |
| |
| itojun@iijlab.net |
| - -X will make a ascii dump. from netbsd. |
| - telnet command sequence decoder (ff xx xx). from netbsd. |
| - print-bgp.c: improve options printing. ugly code exists for |
| unaligned option parsing (need some fix). |
| - const poisoning in SMB decoder. |
| - -Wall -Werror clean checks. |
| - bring in KAME IPv6/IPsec decoding code. |
| |
| Assar Westerlund <assar@sics.se> |
| - SNMPv2 and SNMPv3 printer |
| - If compiled with libsmi, tcpdump can load MIBs on the fly to decode |
| SNMP packets. |
| - Incorporate NFS parsing code from NetBSD. Adds support for nfsv3. |
| - portability fixes |
| - permit building in different directories. |
| |
| Ken Hornstein <kenh@cmf.nrl.navy.mil> |
| - bring in code at |
| /afs/transarc.com/public/afs-contrib/tools/tcpdump for parsing |
| AFS3 packets |
| |
| Andrew Tridgell <tridge@linuxcare.com> |
| - SMB printing code |
| |
| Love <lha@stacken.kth.se> |
| - print-rx.c: add code for printing MakeDir and StoreStatus. Also |
| change date format to the right one. |
| |
| Michael C. Richardson <mcr@sandelman.ottawa.on.ca> |
| - Created tcpdump.org repository |
| |
| v3.4 Sat Jul 25 12:40:55 PDT 1998 |
| |
| - Hardwire Linux slip support since it's too hard to detect. |
| |
| - Redo configuration of "network" libraries (-lsocket and -lnsl) to |
| deal with IRIX. Thanks to John Hawkinson (jhawk@mit.edu) |
| |
| - Added -a which tries to translate network and broadcast addresses to |
| names. Suggested by Rob van Nieuwkerk (robn@verdi.et.tudelft.nl) |
| |
| - Added a configure option to disable gcc. |
| |
| - Added a "raw" packet printer. |
| |
| - Not having an interface address is no longer fatal. Requested by John |
| Hawkinson. |
| |
| - Rework signal setup to accommodate Linux. |
| |
| - OSPF truncation check fix. Also display the type of OSPF packets |
| using MD5 authentication. Thanks to Brian Wellington |
| (bwelling@tis.com) |
| |
| - Fix truncation check bugs in the Kerberos printer. Reported by Ezra |
| Peisach (epeisach@mit.edu) |
| |
| - Don't catch SIGHUP when invoked with nohup(1). Thanks to Dave Plonka |
| (plonka@mfa.com) |
| |
| - Specify full install target as a way of detecting if install |
| directory does not exist. Thanks to Dave Plonka. |
| |
| - Bit-swap FDDI addresses for BSD/OS too. Thanks to Paul Vixie |
| (paul@vix.com) |
| |
| - Fix off-by-one bug when testing size of ethernet packets. Thanks to |
| Marty Leisner (leisner@sdsp.mc.xerox.com) |
| |
| - Add a local autoconf macro to check for routines in libraries; the |
| autoconf version is broken (it only puts the library name in the |
| cache variable name). Thanks to John Hawkinson. |
| |
| - Add a local autoconf macro to check for types; the autoconf version |
| is broken (it uses grep instead of actually compiling a code fragment). |
| |
| - Modified to support the new BSD/OS 2.1 PPP and SLIP link layer header |
| formats. |
| |
| - Extend OSF ip header workaround to versions 1 and 2. |
| |
| - Fix some signed problems in the nfs printer. As reported by David |
| Sacerdote (davids@silence.secnet.com) |
| |
| - Detect group wheel and use it as the default since BSD/OS' install |
| can't hack numeric groups. Reported by David Sacerdote. |
| |
| - AIX needs special loader options. Thanks to Jonathan I. Kamens |
| (jik@cam.ov.com) |
| |
| - Fixed the nfs printer to print port numbers in decimal. Thanks to |
| Kent Vander Velden (graphix@iastate.edu) |
| |
| - Find installed libpcap in /usr/local/lib when not using gcc. |
| |
| - Disallow network masks with non-network bits set. |
| |
| - Attempt to detect "egcs" versions of gcc. |
| |
| - Add missing closing double quotes when displaying bootp strings. |
| Reported by Viet-Trung Luu (vluu@picard.math.uwaterloo.ca) |
| |
| v3.3 Sat Nov 30 20:56:27 PST 1996 |
| |
| - Added Linux support. |
| |
| - GRE encapsulated packet printer thanks to John Hawkinson |
| (jhawk@mit.edu) |
| |
| - Rewrite gmt2local() to avoid problematic os dependencies. |
| |
| - Suppress nfs truncation message on errors. |
| |
| - Add missing m4 quoting in AC_LBL_UNALIGNED_ACCESS autoconf macro. |
| Reported by Joachim Ott (ott@ardala.han.de) |
| |
| - Enable "ip_hl vs. ip_vhl" workaround for OSF4 too. |
| |
| - Print arp hardware type in host order. Thanks to Onno van der Linden |
| (onno@simplex.nl) |
| |
| - Avoid solaris compiler warnings. Thanks to Bruce Barnett |
| (barnett@grymoire.crd.ge.com) |
| |
| - Fix rip printer to not print one more route than is actually in the |
| packet. Thanks to Jean-Luc Richier (Jean-Luc.Richier@imag.fr) and |
| Bill Fenner (fenner@parc.xerox.com) |
| |
| - Use autoconf endian detection since BYTE_ORDER isn't defined on all systems. |
| |
| - Fix dvmrp printer truncation checks and add a dvmrp probe printer. |
| Thanks to Danny J. Mitzel (mitzel@ipsilon.com) |
| |
| - Rewrite ospf printer to improve truncation checks. |
| |
| - Don't parse tcp options past the EOL. As noted by David Sacerdote |
| (davids@secnet.com). Also, check tcp options to make sure they ar |
| actually in the tcp header (in addition to the normal truncation |
| checks). Fix the SACK code to print the N blocks (instead of the |
| first block N times). |
| |
| - Don't say really small UDP packets are truncated just because they |
| aren't big enough to be a RPC. As noted by David Sacerdote. |
| |
| v3.2.1 Sun Jul 14 03:02:26 PDT 1996 |
| |
| - Added rfc1716 icmp codes as suggested by Martin Fredriksson |
| (martin@msp.se) |
| |
| - Print mtu for icmp unreach need frag packets. Thanks to John |
| Hawkinson (jhawk@mit.edu) |
| |
| - Decode icmp router discovery messages. Thanks to Jeffrey Honig |
| (jch@bsdi.com) |
| |
| - Added a printer entry for DLT_IEEE802 as suggested by Tak Kushida |
| (kushida@trl.ibm.co.jp) |
| |
| - Check igmp checksum if possible. Thanks to John Hawkinson. |
| |
| - Made changes for SINIX. Thanks to Andrej Borsenkow |
| (borsenkow.msk@sni.de) |
| |
| - Use autoconf's idea of the top level directory in install targets. |
| Thanks to John Hawkinson. |
| |
| - Avoid infinite loop in tcp options printing code. Thanks to Jeffrey |
| Mogul (mogul@pa.dec.com) |
| |
| - Avoid using -lsocket in IRIX 5.2 and earlier since it breaks snoop. |
| Thanks to John Hawkinson. |
| |
| - Added some more packet truncation checks. |
| |
| - On systems that have it, use sigset() instead of signal() since |
| signal() has different semantics on these systems. |
| |
| - Fixed some more alignment problems on the alpha. |
| |
| - Add code to massage unprintable characters in the domain and ipx |
| printers. Thanks to John Hawkinson. |
| |
| - Added explicit netmask support. Thanks to Steve Nuchia |
| (steve@research.oknet.com) |
| |
| - Add "sca" keyword (for DEC cluster services) as suggested by Terry |
| Kennedy (terry@spcvxa.spc.edu) |
| |
| - Add "atalk" keyword as suggested by John Hawkinson. |
| |
| - Added an igrp printer. Thanks to Francis Dupont |
| (francis.dupont@inria.fr) |
| |
| - Print IPX net numbers in hex a la Novell Netware. Thanks to Terry |
| Kennedy (terry@spcvxa.spc.edu) |
| |
| - Fixed snmp extended tag field parsing bug. Thanks to Pascal Hennequin |
| (pascal.hennequin@hugo.int-evry.fr) |
| |
| - Added some ETHERTYPEs missing on some systems. |
| |
| - Added truncated packet macros and various checks. |
| |
| - Fixed endian problems with the DECnet printer. |
| |
| - Use $CC when checking gcc version. Thanks to Carl Lindberg |
| (carl_lindberg@blacksmith.com) |
| |
| - Fixes for AIX (although this system is not yet supported). Thanks to |
| John Hawkinson. |
| |
| - Fix bugs in the autoconf misaligned accesses code fragment. |
| |
| - Include sys/param.h to get BYTE_ORDER in a few places. Thanks to |
| Pavlin Ivanov Radoslavov (pavlin@cs.titech.ac.jp) |
| |
| v3.2 Sun Jun 23 02:28:10 PDT 1996 |
| |
| - Print new icmp unreachable codes as suggested by Martin Fredriksson |
| (martin@msp.se). Also print code value when unknown for icmp redirect |
| and time exceeded. |
| |
| - Fix an alignment endian bug in getname(). Thanks to John Hawkinson. |
| |
| - Define "new" domain record types if not found in arpa/nameserv.h. |
| Resulted from a suggestion from John Hawkinson (jhawk@mit.edu). Also |
| fixed an endian bug when printing mx record and added some new record |
| types. |
| |
| - Added RIP V2 support. Thanks to Jeffrey Honig (jch@bsdi.com) |
| |
| - Added T/TCP options printing. As suggested by Richard Stevens |
| (rstevens@noao.edu) |
| |
| - Use autoconf to detect architectures that can't handle misaligned |
| accesses. |
| |
| v3.1 Thu Jun 13 20:59:32 PDT 1996 |
| |
| - Changed u_int32/int32 to u_int32_t/int32_t to be consistent with bsd |
| and bind (as suggested by Charles Hannum). |
| |
| - Port to GNU autoconf. |
| |
| - Add support for printing DVMRP and PIM traffic thanks to |
| Havard Eidnes (Havard.Eidnes@runit.sintef.no). |
| |
| - Fix AppleTalk, IPX and DECnet byte order problems due to wrong endian |
| define being referenced. Reported by Terry Kennedy. |
| |
| - Minor fixes to the man page thanks to Mark Andrews. |
| |
| - Endian fixes to RTP and vat packet dumpers, thanks to Bruce Mah |
| (bmah@cs.berkeley.edu). |
| |
| - Added support for new dns types, thanks to Rainer Orth. |
| |
| - Fixed tftp_print() to print the block number for ACKs. |
| |
| - Document -dd and -ddd. Resulted from a bug report from Charlie Slater |
| (cslater@imatek.com). |
| |
| - Check return status from malloc/calloc/etc. |
| |
| - Check return status from pcap_loop() so we can print an error and |
| exit with a bad status if there were problems. |
| |
| - Bail if ip option length is <= 0. Resulted from a bug report from |
| Darren Reed (darrenr@vitruvius.arbld.unimelb.edu.au). |
| |
| - Print out a little more information for sun rpc packets. |
| |
| - Add suport for Kerberos 4 thanks to John Hawkinson (jhawk@mit.edu). |
| |
| - Fixed the Fix EXTRACT_SHORT() and EXTRACT_LONG() macros (which were |
| wrong on little endian machines). |
| |
| - Fixed alignment bug in ipx_decode(). Thanks to Matt Crawford |
| (crawdad@fnal.gov). |
| |
| - Fix ntp_print() to not print garbage when the stratum is |
| "unspecified." Thanks to Deus Ex Machina (root@belle.bork.com). |
| |
| - Rewrote tcp options printer code to check for truncation. Added |
| selective acknowledgment case. |
| |
| - Fixed an endian bug in the ospf printer. Thanks to Jeffrey C Honig |
| (jch@bsdi.com) |
| |
| - Fix rip printer to handle 4.4 BSD sockaddr struct which only uses one |
| octet for the sa_family member. Thanks to Yoshitaka Tokugawa |
| (toku@dit.co.jp) |
| |
| - Don't checksum ip header if we don't have all of it. Thanks to John |
| Hawkinson (jhawk@mit.edu). |
| |
| - Print out hostnames if possible in egp printer. Thanks to Jeffrey |
| Honig (jhc@bsdi.com) |
| |
| |
| v3.1a1 Wed May 3 19:21:11 PDT 1995 |
| |
| - Include time.h when SVR4 is defined to avoid problems under Solaris |
| 2.3. |
| |
| - Fix etheraddr_string() in the ETHER_SERVICE to return the saved |
| strings, not the local buffer. Thanks to Stefan Petri |
| (petri@ibr.cs.tu-bs.de). |
| |
| - Detect when pcap raises the snaplen (e.g. with snit). Print a warning |
| that the selected value was not used. Thanks to Pascal Hennequin |
| (Pascal.Hennequin@hugo.int-evry.fr). |
| |
| - Add a truncated packet test to print-nfs.c. Thanks to Pascal Hennequin. |
| |
| - BYTEORDER -> BYTE_ORDER Thanks to Terry Kennedy (terry@spcvxa.spc.edu). |
| |
| v3.0.3 Sun Oct 1 18:35:00 GMT 1995 |
| |
| - Although there never was a 3.0.3 release, the linux boys cleverly |
| "released" one in late 1995. |
| |
| v3.0.2 Thu Apr 20 21:28:16 PDT 1995 |
| |
| - Change configuration to not use gcc v2 flags with gcc v1. |
| |
| - Redo gmt2local() so that it works under BSDI (which seems to return |
| an empty timezone struct from gettimeofday()). Based on report from |
| Terry Kennedy (terry@spcvxa.spc.edu). |
| |
| - Change configure to recognize IP[0-9]* as "mips" SGI hardware. Based |
| on report from Mark Andrews (mandrews@alias.com). |
| |
| - Don't pass cc flags to gcc. Resulted from a bug report from Rainer |
| Orth (ro@techfak.uni-bielefeld.de). |
| |
| - Fixed printout of connection id for uncompressed tcp slip packets. |
| Resulted from a bug report from Richard Stevens (rstevens@noao.edu). |
| |
| - Hack around deficiency in Ultrix's make. |
| |
| - Add ETHERTYPE_TRAIL define which is missing from irix5. |
| |
| v3.0.1 Wed Aug 31 22:42:26 PDT 1994 |
| |
| - Fix problems with gcc2 vs. malloc() and read() prototypes under SunOS 4. |
| |
| v3.0 Mon Jun 20 19:23:27 PDT 1994 |
| |
| - Added support for printing tcp option timestamps thanks to |
| Mark Andrews (mandrews@alias.com). |
| |
| - Reorganize protocol dumpers to take const pointers to packets so they |
| never change the contents (i.e., they used to do endian conversions |
| in place). Previously, whenever more than one pass was taken over |
| the packet, the packet contents would be dumped incorrectly (i.e., |
| the output form -x would be wrong on little endian machines because |
| the protocol dumpers would modify the data). Thanks to Charles Hannum |
| (mycroft@gnu.ai.mit.edu) for reporting this problem. |
| |
| - Added support for decnet protocol dumping thanks to Jeff Mogul |
| (mogul@pa.dec.com). |
| |
| - Fix bug that caused length of packet to be incorrectly printed |
| (off by ether header size) for unknown ethernet types thanks |
| to Greg Miller (gmiller@kayak.mitre.org). |
| |
| - Added support for IPX protocol dumping thanks to Brad Parker |
| (brad@fcr.com). |
| |
| - Added check to verify IP header checksum under -v thanks to |
| Brad Parker (brad@fcr.com). |
| |
| - Move packet capture code to new libpcap library (which is |
| packaged separately). |
| |
| - Prototype everything and assume an ansi compiler. |
| |
| - print-arp.c: Print hardware ethernet addresses if they're not |
| what we expect. |
| |
| - print-bootp.c: Decode the cmu vendor field. Add RFC1497 tags. |
| Many helpful suggestions from Gordon Ross (gwr@jericho.mc.com). |
| |
| - print-fddi.c: Improvements. Thanks to Jeffrey Mogul |
| (mogul@pa.dec.com). |
| |
| - print-icmp.c: Byte swap netmask before printing. Thanks to |
| Richard Stevens (rstevens@noao.edu). Print icmp type when unknown. |
| |
| - print-ip.c: Print the inner ip datagram of ip-in-ip encapsulated packets. |
| By default, only the inner packet is dumped, appended with the token |
| "(encap)". Under -v, both the inner and output packets are dumped |
| (on the same line). Note that the filter applies to the original packet, |
| not the encapsulated packet. So if you run tcpdump on a net with an |
| IP Multicast tunnel, you cannot filter out the datagrams using the |
| conventional syntax. (You can filter away all the ip-in-ip traffic |
| with "not ip proto 4".) |
| |
| - print-nfs.c: Keep pending rpc's in circular table. Add generic |
| nfs header and remove os dependences. Thanks to Jeffrey Mogul. |
| |
| - print-ospf.c: Improvements. Thanks to Jeffrey Mogul. |
| |
| - tcpdump.c: Add -T flag allows interpretation of "vat", "wb", "rpc" |
| (sunrpc) and rtp packets. Added "inbound" and "outbound" keywords |
| Add && and || operators |
| |
| v2.2.1 Tue Jun 6 17:57:22 PDT 1992 |
| |
| - Fix bug with -c flag. |
| |
| v2.2 Fri May 22 17:19:41 PDT 1992 |
| |
| - savefile.c: Remove hack that shouldn't have been exported. Add |
| truncate checks. |
| |
| - Added the 'icmp' keyword. For example, 'icmp[0] != 8 and icmp[0] != 0' |
| matches non-echo/reply ICMP packets. |
| |
| - Many improvements to filter code optimizer. |
| |
| - Added 'multicast' keyword and extended the 'broadcast' keyword can now be |
| so that protocol qualifications are allowed. For example, "ip broadcast" |
| and "ether multicast" are valid filters. |
| |
| - Added support for monitoring the loopback interface (i.e. 'tcpdump -i lo'). |
| Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) contributed the kernel |
| patches to netinet/if_loop.c. |
| |
| - Added support for the Ungermann-Bass Ethernet on IBM/PC-RTs running AOS. |
| Contact Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) for the diffs. |
| |
| - Added EGP and OSPF printers, thanks to Jeffrey Honig. |
| |
| v2.1 Tue Jan 28 11:00:14 PST 1992 |
| |
| - Internal release (never publically exported). |
| |
| v2.0.1 Sun Jan 26 21:10:10 PDT |
| |
| - Various byte ordering fixes. |
| |
| - Add truncation checks. |
| |
| - inet.c: Support BSD style SIOCGIFCONF. |
| |
| - nametoaddr.c: Handle multi addresses for single host. |
| |
| - optimize.c: Rewritten. |
| |
| - pcap-bpf.c: don't choke when we get ptraced. only set promiscuous |
| for broadcast nets. |
| |
| - print-atal.c: Fix an alignment bug (thanks to |
| stanonik@nprdc.navy.mil) Add missing printf() argument. |
| |
| - print-bootp.c: First attempt at decoding the vendor buffer. |
| |
| - print-domain.c: Fix truncation checks. |
| |
| - print-icmp.c: Calculate length of packets from the ip header. |
| |
| - print-ip.c: Print frag id in decimal (so it's easier to match up |
| with non-frags). Add support for ospf, egp and igmp. |
| |
| - print-nfs.c: Lots of changes. |
| |
| - print-ntp.c: Make some verbose output depend on -v. |
| |
| - print-snmp.c: New version from John LoVerso. |
| |
| - print-tcp.c: Print rfc1072 tcp options. |
| |
| - tcpdump.c: Print "0x" prefix for %x formats. Always print 6 digits |
| (microseconds) worth of precision. Fix uid bugs. |
| |
| - A packet dumper has been added (thanks to Jeff Mogul of DECWRL). |
| With this option, you can create an architecture independent binary |
| trace file in real time, without the overhead of the packet printer. |
| At a later time, the packets can be filtered (again) and printed. |
| |
| - BSD is supported. You must have BPF in your kernel. |
| Since the filtering is now done in the kernel, fewer packets are |
| dropped. In fact, with BPF and the packet dumper option, a measly |
| Sun 3/50 can keep up with a busy network. |
| |
| - Compressed SLIP packets can now be dumped, provided you use our |
| SLIP software and BPF. These packets are dumped as any other IP |
| packet; the compressed headers are dumped with the '-e' option. |
| |
| - Machines with little-endian byte ordering are supported (thanks to |
| Jeff Mogul). |
| |
| - Ultrix 4.0 is supported (also thanks to Jeff Mogul). |
| |
| - IBM RT and Stanford Enetfilter support has been added by |
| Rayan Zachariassen <rayan@canet.ca>. Tcpdump has been tested under |
| both the vanilla Enetfilter interface, and the extended interface |
| (#ifdef'd by IBMRTPC) present in the MERIT version of the Enetfilter. |
| |
| - TFTP packets are now printed (requests only). |
| |
| - BOOTP packets are now printed. |
| |
| - SNMP packets are now printed. (thanks to John LoVerso of Xylogics). |
| |
| - Sparc architectures, including the Sparcstation-1, are now |
| supported thanks to Steve McCanne and Craig Leres. |
| |
| - SunOS 4 is now supported thanks to Micky Liu of Columbia |
| University (micky@cunixc.cc.columbia.edu). |
| |
| - IP options are now printed. |
| |
| - RIP packets are now printed. |
| |
| - There's a -v flag that prints out more information than the |
| default (e.g., it will enable printing of IP ttl, tos and id) |
| and -q flag that prints out less (e.g., it will disable |
| interpretation of AppleTalk-in-UDP). |
| |
| - The grammar has undergone substantial changes (if you have an |
| earlier version of tcpdump, you should re-read the manual |
| entry). |
| |
| The most useful change is the addition of an expression |
| syntax that lets you filter on arbitrary fields or values in the |
| packet. E.g., "ip[0] > 0x45" would print only packets with IP |
| options, "tcp[13] & 3 != 0" would print only TCP SYN and FIN |
| packets. |
| |
| The most painful change is that concatenation no longer means |
| "and" -- e.g., you have to say "host foo and port bar" instead |
| of "host foo port bar". The up side to this down is that |
| repeated qualifiers can be omitted, making most filter |
| expressions shorter. E.g., you can now say "ip host foo and |
| (bar or baz)" to look at ip traffic between hosts foo and bar or |
| between hosts foo and baz. [The old way of saying this was "ip |
| host foo and (ip host bar or ip host baz)".] |
| |
| v2.0 Sun Jan 13 12:20:40 PST 1991 |
| |
| - Initial public release. |
