| /* |
| * Copyright (c) 1997 Yen Yen Lim and North Dakota State University |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * This product includes software developed by Yen Yen Lim and |
| North Dakota State University |
| * 4. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, |
| * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| * @(#) $Header: /tcpdump/master/tcpdump/atmuni31.h,v 1.2 2002/08/05 07:47:23 guy Exp $ (LBL) |
| */ |
| |
| /* Based on UNI3.1 standard by ATM Forum */ |
| |
| /* ATM traffic types based on VPI=0 and (the following VCI */ |
| #define PPC 0x05 /* Point-to-point signal msg */ |
| #define BCC 0x02 /* Broadcast signal msg */ |
| #define OAMF4SC 0x03 /* Segment OAM F4 flow cell */ |
| #define OAMF4EC 0x04 /* End-to-end OAM F4 flow cell */ |
| #define METAC 0x01 /* Meta signal msg */ |
| #define ILMIC 0x10 /* ILMI msg */ |
| |
| /* Q.2931 signalling messages */ |
| #define CALL_PROCEED 0x02 /* call proceeding */ |
| #define CONNECT 0x07 /* connect */ |
| #define CONNECT_ACK 0x0f /* connect_ack */ |
| #define SETUP 0x05 /* setup */ |
| #define RELEASE 0x4d /* release */ |
| #define RELEASE_DONE 0x5a /* release_done */ |
| #define RESTART 0x46 /* restart */ |
| #define RESTART_ACK 0x4e /* restart ack */ |
| #define STATUS 0x7d /* status */ |
| #define STATUS_ENQ 0x75 /* status ack */ |
| #define ADD_PARTY 0x80 /* add party */ |
| #define ADD_PARTY_ACK 0x81 /* add party ack */ |
| #define ADD_PARTY_REJ 0x82 /* add party rej */ |
| #define DROP_PARTY 0x83 /* drop party */ |
| #define DROP_PARTY_ACK 0x84 /* drop party ack */ |
| |
| /* Information Element Parameters in the signalling messages */ |
| #define CAUSE 0x08 /* cause */ |
| #define ENDPT_REF 0x54 /* endpoint reference */ |
| #define AAL_PARA 0x58 /* ATM adaptation layer parameters */ |
| #define TRAFF_DESCRIP 0x59 /* atm traffic descriptors */ |
| #define CONNECT_ID 0x5a /* connection identifier */ |
| #define QOS_PARA 0x5c /* quality of service parameters */ |
| #define B_HIGHER 0x5d /* broadband higher layer information */ |
| #define B_BEARER 0x5e /* broadband bearer capability */ |
| #define B_LOWER 0x5f /* broadband lower information */ |
| #define CALLING_PARTY 0x6c /* calling party number */ |
| #define CALLED_PARTY 0x70 /* called party nmber */ |
| |
| #define Q2931 0x09 |
| |
| /* Q.2931 signalling general messages format */ |
| #define PROTO_POS 0 /* offset of protocol discriminator */ |
| #define CALL_REF_POS 2 /* offset of call reference value */ |
| #define MSG_TYPE_POS 5 /* offset of message type */ |
| #define MSG_LEN_POS 7 /* offset of mesage length */ |
| #define IE_BEGIN_POS 9 /* offset of first information element */ |
| |
| /* format of signalling messages */ |
| #define TYPE_POS 0 |
| #define LEN_POS 2 |
| #define FIELD_BEGIN_POS 4 |
