| // Copyright 2010 the V8 project authors. All rights reserved. |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include "../include/v8stdint.h" |
| #include "unicode.h" |
| #include "globals.h" |
| #include "checks.h" |
| #include "allocation.h" |
| #include "utils.h" |
| #include "list.h" |
| |
| #include "scanner-base.h" |
| #include "preparse-data.h" |
| #include "preparser.h" |
| |
| namespace v8 { |
| namespace preparser { |
| |
| // Preparsing checks a JavaScript program and emits preparse-data that helps |
| // a later parsing to be faster. |
| // See preparser-data.h for the data. |
| |
| // The PreParser checks that the syntax follows the grammar for JavaScript, |
| // and collects some information about the program along the way. |
| // The grammar check is only performed in order to understand the program |
| // sufficiently to deduce some information about it, that can be used |
| // to speed up later parsing. Finding errors is not the goal of pre-parsing, |
| // rather it is to speed up properly written and correct programs. |
| // That means that contextual checks (like a label being declared where |
| // it is used) are generally omitted. |
| |
| namespace i = ::v8::internal; |
| |
| #define CHECK_OK ok); \ |
| if (!*ok) return -1; \ |
| ((void)0 |
| #define DUMMY ) // to make indentation work |
| #undef DUMMY |
| |
| |
| void PreParser::ReportUnexpectedToken(i::Token::Value token) { |
| // We don't report stack overflows here, to avoid increasing the |
| // stack depth even further. Instead we report it after parsing is |
| // over, in ParseProgram. |
| if (token == i::Token::ILLEGAL && stack_overflow_) { |
| return; |
| } |
| i::JavaScriptScanner::Location source_location = scanner_->location(); |
| |
| // Four of the tokens are treated specially |
| switch (token) { |
| case i::Token::EOS: |
| return ReportMessageAt(source_location.beg_pos, source_location.end_pos, |
| "unexpected_eos", NULL); |
| case i::Token::NUMBER: |
| return ReportMessageAt(source_location.beg_pos, source_location.end_pos, |
| "unexpected_token_number", NULL); |
| case i::Token::STRING: |
| return ReportMessageAt(source_location.beg_pos, source_location.end_pos, |
| "unexpected_token_string", NULL); |
| case i::Token::IDENTIFIER: |
| case i::Token::FUTURE_RESERVED_WORD: |
| return ReportMessageAt(source_location.beg_pos, source_location.end_pos, |
| "unexpected_token_identifier", NULL); |
| default: |
| const char* name = i::Token::String(token); |
| ReportMessageAt(source_location.beg_pos, source_location.end_pos, |
| "unexpected_token", name); |
| } |
| } |
| |
| |
| PreParser::SourceElements PreParser::ParseSourceElements(int end_token, |
| bool* ok) { |
| // SourceElements :: |
| // (Statement)* <end_token> |
| |
| while (peek() != end_token) { |
| ParseStatement(CHECK_OK); |
| } |
| return kUnknownSourceElements; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseStatement(bool* ok) { |
| // Statement :: |
| // Block |
| // VariableStatement |
| // EmptyStatement |
| // ExpressionStatement |
| // IfStatement |
| // IterationStatement |
| // ContinueStatement |
| // BreakStatement |
| // ReturnStatement |
| // WithStatement |
| // LabelledStatement |
| // SwitchStatement |
| // ThrowStatement |
| // TryStatement |
| // DebuggerStatement |
| |
| // Note: Since labels can only be used by 'break' and 'continue' |
| // statements, which themselves are only valid within blocks, |
| // iterations or 'switch' statements (i.e., BreakableStatements), |
| // labels can be simply ignored in all other cases; except for |
| // trivial labeled break statements 'label: break label' which is |
| // parsed into an empty statement. |
| |
| // Keep the source position of the statement |
| switch (peek()) { |
| case i::Token::LBRACE: |
| return ParseBlock(ok); |
| |
| case i::Token::CONST: |
| case i::Token::VAR: |
| return ParseVariableStatement(ok); |
| |
| case i::Token::SEMICOLON: |
| Next(); |
| return kUnknownStatement; |
| |
| case i::Token::IF: |
| return ParseIfStatement(ok); |
| |
| case i::Token::DO: |
| return ParseDoWhileStatement(ok); |
| |
| case i::Token::WHILE: |
| return ParseWhileStatement(ok); |
| |
| case i::Token::FOR: |
| return ParseForStatement(ok); |
| |
| case i::Token::CONTINUE: |
| return ParseContinueStatement(ok); |
| |
| case i::Token::BREAK: |
| return ParseBreakStatement(ok); |
| |
| case i::Token::RETURN: |
| return ParseReturnStatement(ok); |
| |
| case i::Token::WITH: |
| return ParseWithStatement(ok); |
| |
| case i::Token::SWITCH: |
| return ParseSwitchStatement(ok); |
| |
| case i::Token::THROW: |
| return ParseThrowStatement(ok); |
| |
| case i::Token::TRY: |
| return ParseTryStatement(ok); |
| |
| case i::Token::FUNCTION: |
| return ParseFunctionDeclaration(ok); |
| |
| case i::Token::NATIVE: |
| return ParseNativeDeclaration(ok); |
| |
| case i::Token::DEBUGGER: |
| return ParseDebuggerStatement(ok); |
| |
| default: |
| return ParseExpressionOrLabelledStatement(ok); |
| } |
| } |
| |
| |
| PreParser::Statement PreParser::ParseFunctionDeclaration(bool* ok) { |
| // FunctionDeclaration :: |
| // 'function' Identifier '(' FormalParameterListopt ')' '{' FunctionBody '}' |
| Expect(i::Token::FUNCTION, CHECK_OK); |
| ParseIdentifier(CHECK_OK); |
| ParseFunctionLiteral(CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| // Language extension which is only enabled for source files loaded |
| // through the API's extension mechanism. A native function |
| // declaration is resolved by looking up the function through a |
| // callback provided by the extension. |
| PreParser::Statement PreParser::ParseNativeDeclaration(bool* ok) { |
| Expect(i::Token::NATIVE, CHECK_OK); |
| Expect(i::Token::FUNCTION, CHECK_OK); |
| ParseIdentifier(CHECK_OK); |
| Expect(i::Token::LPAREN, CHECK_OK); |
| bool done = (peek() == i::Token::RPAREN); |
| while (!done) { |
| ParseIdentifier(CHECK_OK); |
| done = (peek() == i::Token::RPAREN); |
| if (!done) { |
| Expect(i::Token::COMMA, CHECK_OK); |
| } |
| } |
| Expect(i::Token::RPAREN, CHECK_OK); |
| Expect(i::Token::SEMICOLON, CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseBlock(bool* ok) { |
| // Block :: |
| // '{' Statement* '}' |
| |
| // Note that a Block does not introduce a new execution scope! |
| // (ECMA-262, 3rd, 12.2) |
| // |
| Expect(i::Token::LBRACE, CHECK_OK); |
| while (peek() != i::Token::RBRACE) { |
| ParseStatement(CHECK_OK); |
| } |
| Expect(i::Token::RBRACE, CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseVariableStatement(bool* ok) { |
| // VariableStatement :: |
| // VariableDeclarations ';' |
| |
| Statement result = ParseVariableDeclarations(true, NULL, CHECK_OK); |
| ExpectSemicolon(CHECK_OK); |
| return result; |
| } |
| |
| |
| // If the variable declaration declares exactly one non-const |
| // variable, then *var is set to that variable. In all other cases, |
| // *var is untouched; in particular, it is the caller's responsibility |
| // to initialize it properly. This mechanism is also used for the parsing |
| // of 'for-in' loops. |
| PreParser::Statement PreParser::ParseVariableDeclarations(bool accept_IN, |
| int* num_decl, |
| bool* ok) { |
| // VariableDeclarations :: |
| // ('var' | 'const') (Identifier ('=' AssignmentExpression)?)+[','] |
| |
| if (peek() == i::Token::VAR) { |
| Consume(i::Token::VAR); |
| } else if (peek() == i::Token::CONST) { |
| Consume(i::Token::CONST); |
| } else { |
| *ok = false; |
| return 0; |
| } |
| |
| // The scope of a variable/const declared anywhere inside a function |
| // is the entire function (ECMA-262, 3rd, 10.1.3, and 12.2). . |
| int nvars = 0; // the number of variables declared |
| do { |
| // Parse variable name. |
| if (nvars > 0) Consume(i::Token::COMMA); |
| ParseIdentifier(CHECK_OK); |
| nvars++; |
| if (peek() == i::Token::ASSIGN) { |
| Expect(i::Token::ASSIGN, CHECK_OK); |
| ParseAssignmentExpression(accept_IN, CHECK_OK); |
| } |
| } while (peek() == i::Token::COMMA); |
| |
| if (num_decl != NULL) *num_decl = nvars; |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseExpressionOrLabelledStatement( |
| bool* ok) { |
| // ExpressionStatement | LabelledStatement :: |
| // Expression ';' |
| // Identifier ':' Statement |
| |
| Expression expr = ParseExpression(true, CHECK_OK); |
| if (peek() == i::Token::COLON && expr == kIdentifierExpression) { |
| Consume(i::Token::COLON); |
| return ParseStatement(ok); |
| } |
| // Parsed expression statement. |
| ExpectSemicolon(CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseIfStatement(bool* ok) { |
| // IfStatement :: |
| // 'if' '(' Expression ')' Statement ('else' Statement)? |
| |
| Expect(i::Token::IF, CHECK_OK); |
| Expect(i::Token::LPAREN, CHECK_OK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RPAREN, CHECK_OK); |
| ParseStatement(CHECK_OK); |
| if (peek() == i::Token::ELSE) { |
| Next(); |
| ParseStatement(CHECK_OK); |
| } |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseContinueStatement(bool* ok) { |
| // ContinueStatement :: |
| // 'continue' [no line terminator] Identifier? ';' |
| |
| Expect(i::Token::CONTINUE, CHECK_OK); |
| i::Token::Value tok = peek(); |
| if (!scanner_->has_line_terminator_before_next() && |
| tok != i::Token::SEMICOLON && |
| tok != i::Token::RBRACE && |
| tok != i::Token::EOS) { |
| ParseIdentifier(CHECK_OK); |
| } |
| ExpectSemicolon(CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseBreakStatement(bool* ok) { |
| // BreakStatement :: |
| // 'break' [no line terminator] Identifier? ';' |
| |
| Expect(i::Token::BREAK, CHECK_OK); |
| i::Token::Value tok = peek(); |
| if (!scanner_->has_line_terminator_before_next() && |
| tok != i::Token::SEMICOLON && |
| tok != i::Token::RBRACE && |
| tok != i::Token::EOS) { |
| ParseIdentifier(CHECK_OK); |
| } |
| ExpectSemicolon(CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseReturnStatement(bool* ok) { |
| // ReturnStatement :: |
| // 'return' [no line terminator] Expression? ';' |
| |
| // Consume the return token. It is necessary to do the before |
| // reporting any errors on it, because of the way errors are |
| // reported (underlining). |
| Expect(i::Token::RETURN, CHECK_OK); |
| |
| // An ECMAScript program is considered syntactically incorrect if it |
| // contains a return statement that is not within the body of a |
| // function. See ECMA-262, section 12.9, page 67. |
| // This is not handled during preparsing. |
| |
| i::Token::Value tok = peek(); |
| if (!scanner_->has_line_terminator_before_next() && |
| tok != i::Token::SEMICOLON && |
| tok != i::Token::RBRACE && |
| tok != i::Token::EOS) { |
| ParseExpression(true, CHECK_OK); |
| } |
| ExpectSemicolon(CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseWithStatement(bool* ok) { |
| // WithStatement :: |
| // 'with' '(' Expression ')' Statement |
| Expect(i::Token::WITH, CHECK_OK); |
| Expect(i::Token::LPAREN, CHECK_OK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RPAREN, CHECK_OK); |
| |
| scope_->EnterWith(); |
| ParseStatement(CHECK_OK); |
| scope_->LeaveWith(); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseSwitchStatement(bool* ok) { |
| // SwitchStatement :: |
| // 'switch' '(' Expression ')' '{' CaseClause* '}' |
| |
| Expect(i::Token::SWITCH, CHECK_OK); |
| Expect(i::Token::LPAREN, CHECK_OK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RPAREN, CHECK_OK); |
| |
| Expect(i::Token::LBRACE, CHECK_OK); |
| i::Token::Value token = peek(); |
| while (token != i::Token::RBRACE) { |
| if (token == i::Token::CASE) { |
| Expect(i::Token::CASE, CHECK_OK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::COLON, CHECK_OK); |
| } else if (token == i::Token::DEFAULT) { |
| Expect(i::Token::DEFAULT, CHECK_OK); |
| Expect(i::Token::COLON, CHECK_OK); |
| } else { |
| ParseStatement(CHECK_OK); |
| } |
| token = peek(); |
| } |
| Expect(i::Token::RBRACE, CHECK_OK); |
| |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseDoWhileStatement(bool* ok) { |
| // DoStatement :: |
| // 'do' Statement 'while' '(' Expression ')' ';' |
| |
| Expect(i::Token::DO, CHECK_OK); |
| ParseStatement(CHECK_OK); |
| Expect(i::Token::WHILE, CHECK_OK); |
| Expect(i::Token::LPAREN, CHECK_OK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RPAREN, CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseWhileStatement(bool* ok) { |
| // WhileStatement :: |
| // 'while' '(' Expression ')' Statement |
| |
| Expect(i::Token::WHILE, CHECK_OK); |
| Expect(i::Token::LPAREN, CHECK_OK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RPAREN, CHECK_OK); |
| ParseStatement(CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseForStatement(bool* ok) { |
| // ForStatement :: |
| // 'for' '(' Expression? ';' Expression? ';' Expression? ')' Statement |
| |
| Expect(i::Token::FOR, CHECK_OK); |
| Expect(i::Token::LPAREN, CHECK_OK); |
| if (peek() != i::Token::SEMICOLON) { |
| if (peek() == i::Token::VAR || peek() == i::Token::CONST) { |
| int decl_count; |
| ParseVariableDeclarations(false, &decl_count, CHECK_OK); |
| if (peek() == i::Token::IN && decl_count == 1) { |
| Expect(i::Token::IN, CHECK_OK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RPAREN, CHECK_OK); |
| |
| ParseStatement(CHECK_OK); |
| return kUnknownStatement; |
| } |
| } else { |
| ParseExpression(false, CHECK_OK); |
| if (peek() == i::Token::IN) { |
| Expect(i::Token::IN, CHECK_OK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RPAREN, CHECK_OK); |
| |
| ParseStatement(CHECK_OK); |
| return kUnknownStatement; |
| } |
| } |
| } |
| |
| // Parsed initializer at this point. |
| Expect(i::Token::SEMICOLON, CHECK_OK); |
| |
| if (peek() != i::Token::SEMICOLON) { |
| ParseExpression(true, CHECK_OK); |
| } |
| Expect(i::Token::SEMICOLON, CHECK_OK); |
| |
| if (peek() != i::Token::RPAREN) { |
| ParseExpression(true, CHECK_OK); |
| } |
| Expect(i::Token::RPAREN, CHECK_OK); |
| |
| ParseStatement(CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseThrowStatement(bool* ok) { |
| // ThrowStatement :: |
| // 'throw' [no line terminator] Expression ';' |
| |
| Expect(i::Token::THROW, CHECK_OK); |
| if (scanner_->has_line_terminator_before_next()) { |
| i::JavaScriptScanner::Location pos = scanner_->location(); |
| ReportMessageAt(pos.beg_pos, pos.end_pos, |
| "newline_after_throw", NULL); |
| *ok = false; |
| return kUnknownStatement; |
| } |
| ParseExpression(true, CHECK_OK); |
| ExpectSemicolon(CHECK_OK); |
| |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseTryStatement(bool* ok) { |
| // TryStatement :: |
| // 'try' Block Catch |
| // 'try' Block Finally |
| // 'try' Block Catch Finally |
| // |
| // Catch :: |
| // 'catch' '(' Identifier ')' Block |
| // |
| // Finally :: |
| // 'finally' Block |
| |
| // In preparsing, allow any number of catch/finally blocks, including zero |
| // of both. |
| |
| Expect(i::Token::TRY, CHECK_OK); |
| |
| ParseBlock(CHECK_OK); |
| |
| bool catch_or_finally_seen = false; |
| if (peek() == i::Token::CATCH) { |
| Consume(i::Token::CATCH); |
| Expect(i::Token::LPAREN, CHECK_OK); |
| ParseIdentifier(CHECK_OK); |
| Expect(i::Token::RPAREN, CHECK_OK); |
| scope_->EnterWith(); |
| ParseBlock(ok); |
| scope_->LeaveWith(); |
| if (!*ok) return kUnknownStatement; |
| catch_or_finally_seen = true; |
| } |
| if (peek() == i::Token::FINALLY) { |
| Consume(i::Token::FINALLY); |
| ParseBlock(CHECK_OK); |
| catch_or_finally_seen = true; |
| } |
| if (!catch_or_finally_seen) { |
| *ok = false; |
| } |
| return kUnknownStatement; |
| } |
| |
| |
| PreParser::Statement PreParser::ParseDebuggerStatement(bool* ok) { |
| // In ECMA-262 'debugger' is defined as a reserved keyword. In some browser |
| // contexts this is used as a statement which invokes the debugger as if a |
| // break point is present. |
| // DebuggerStatement :: |
| // 'debugger' ';' |
| |
| Expect(i::Token::DEBUGGER, CHECK_OK); |
| ExpectSemicolon(CHECK_OK); |
| return kUnknownStatement; |
| } |
| |
| |
| // Precedence = 1 |
| PreParser::Expression PreParser::ParseExpression(bool accept_IN, bool* ok) { |
| // Expression :: |
| // AssignmentExpression |
| // Expression ',' AssignmentExpression |
| |
| Expression result = ParseAssignmentExpression(accept_IN, CHECK_OK); |
| while (peek() == i::Token::COMMA) { |
| Expect(i::Token::COMMA, CHECK_OK); |
| ParseAssignmentExpression(accept_IN, CHECK_OK); |
| result = kUnknownExpression; |
| } |
| return result; |
| } |
| |
| |
| // Precedence = 2 |
| PreParser::Expression PreParser::ParseAssignmentExpression(bool accept_IN, |
| bool* ok) { |
| // AssignmentExpression :: |
| // ConditionalExpression |
| // LeftHandSideExpression AssignmentOperator AssignmentExpression |
| |
| Expression expression = ParseConditionalExpression(accept_IN, CHECK_OK); |
| |
| if (!i::Token::IsAssignmentOp(peek())) { |
| // Parsed conditional expression only (no assignment). |
| return expression; |
| } |
| |
| i::Token::Value op = Next(); // Get assignment operator. |
| ParseAssignmentExpression(accept_IN, CHECK_OK); |
| |
| if ((op == i::Token::ASSIGN) && (expression == kThisPropertyExpression)) { |
| scope_->AddProperty(); |
| } |
| |
| return kUnknownExpression; |
| } |
| |
| |
| // Precedence = 3 |
| PreParser::Expression PreParser::ParseConditionalExpression(bool accept_IN, |
| bool* ok) { |
| // ConditionalExpression :: |
| // LogicalOrExpression |
| // LogicalOrExpression '?' AssignmentExpression ':' AssignmentExpression |
| |
| // We start using the binary expression parser for prec >= 4 only! |
| Expression expression = ParseBinaryExpression(4, accept_IN, CHECK_OK); |
| if (peek() != i::Token::CONDITIONAL) return expression; |
| Consume(i::Token::CONDITIONAL); |
| // In parsing the first assignment expression in conditional |
| // expressions we always accept the 'in' keyword; see ECMA-262, |
| // section 11.12, page 58. |
| ParseAssignmentExpression(true, CHECK_OK); |
| Expect(i::Token::COLON, CHECK_OK); |
| ParseAssignmentExpression(accept_IN, CHECK_OK); |
| return kUnknownExpression; |
| } |
| |
| |
| int PreParser::Precedence(i::Token::Value tok, bool accept_IN) { |
| if (tok == i::Token::IN && !accept_IN) |
| return 0; // 0 precedence will terminate binary expression parsing |
| |
| return i::Token::Precedence(tok); |
| } |
| |
| |
| // Precedence >= 4 |
| PreParser::Expression PreParser::ParseBinaryExpression(int prec, |
| bool accept_IN, |
| bool* ok) { |
| Expression result = ParseUnaryExpression(CHECK_OK); |
| for (int prec1 = Precedence(peek(), accept_IN); prec1 >= prec; prec1--) { |
| // prec1 >= 4 |
| while (Precedence(peek(), accept_IN) == prec1) { |
| Next(); |
| ParseBinaryExpression(prec1 + 1, accept_IN, CHECK_OK); |
| result = kUnknownExpression; |
| } |
| } |
| return result; |
| } |
| |
| |
| PreParser::Expression PreParser::ParseUnaryExpression(bool* ok) { |
| // UnaryExpression :: |
| // PostfixExpression |
| // 'delete' UnaryExpression |
| // 'void' UnaryExpression |
| // 'typeof' UnaryExpression |
| // '++' UnaryExpression |
| // '--' UnaryExpression |
| // '+' UnaryExpression |
| // '-' UnaryExpression |
| // '~' UnaryExpression |
| // '!' UnaryExpression |
| |
| i::Token::Value op = peek(); |
| if (i::Token::IsUnaryOp(op) || i::Token::IsCountOp(op)) { |
| op = Next(); |
| ParseUnaryExpression(ok); |
| return kUnknownExpression; |
| } else { |
| return ParsePostfixExpression(ok); |
| } |
| } |
| |
| |
| PreParser::Expression PreParser::ParsePostfixExpression(bool* ok) { |
| // PostfixExpression :: |
| // LeftHandSideExpression ('++' | '--')? |
| |
| Expression expression = ParseLeftHandSideExpression(CHECK_OK); |
| if (!scanner_->has_line_terminator_before_next() && |
| i::Token::IsCountOp(peek())) { |
| Next(); |
| return kUnknownExpression; |
| } |
| return expression; |
| } |
| |
| |
| PreParser::Expression PreParser::ParseLeftHandSideExpression(bool* ok) { |
| // LeftHandSideExpression :: |
| // (NewExpression | MemberExpression) ... |
| |
| Expression result; |
| if (peek() == i::Token::NEW) { |
| result = ParseNewExpression(CHECK_OK); |
| } else { |
| result = ParseMemberExpression(CHECK_OK); |
| } |
| |
| while (true) { |
| switch (peek()) { |
| case i::Token::LBRACK: { |
| Consume(i::Token::LBRACK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RBRACK, CHECK_OK); |
| if (result == kThisExpression) { |
| result = kThisPropertyExpression; |
| } else { |
| result = kUnknownExpression; |
| } |
| break; |
| } |
| |
| case i::Token::LPAREN: { |
| ParseArguments(CHECK_OK); |
| result = kUnknownExpression; |
| break; |
| } |
| |
| case i::Token::PERIOD: { |
| Consume(i::Token::PERIOD); |
| ParseIdentifierName(CHECK_OK); |
| if (result == kThisExpression) { |
| result = kThisPropertyExpression; |
| } else { |
| result = kUnknownExpression; |
| } |
| break; |
| } |
| |
| default: |
| return result; |
| } |
| } |
| } |
| |
| |
| PreParser::Expression PreParser::ParseNewExpression(bool* ok) { |
| // NewExpression :: |
| // ('new')+ MemberExpression |
| |
| // The grammar for new expressions is pretty warped. The keyword |
| // 'new' can either be a part of the new expression (where it isn't |
| // followed by an argument list) or a part of the member expression, |
| // where it must be followed by an argument list. To accommodate |
| // this, we parse the 'new' keywords greedily and keep track of how |
| // many we have parsed. This information is then passed on to the |
| // member expression parser, which is only allowed to match argument |
| // lists as long as it has 'new' prefixes left |
| unsigned new_count = 0; |
| do { |
| Consume(i::Token::NEW); |
| new_count++; |
| } while (peek() == i::Token::NEW); |
| |
| return ParseMemberWithNewPrefixesExpression(new_count, ok); |
| } |
| |
| |
| PreParser::Expression PreParser::ParseMemberExpression(bool* ok) { |
| return ParseMemberWithNewPrefixesExpression(0, ok); |
| } |
| |
| |
| PreParser::Expression PreParser::ParseMemberWithNewPrefixesExpression( |
| unsigned new_count, bool* ok) { |
| // MemberExpression :: |
| // (PrimaryExpression | FunctionLiteral) |
| // ('[' Expression ']' | '.' Identifier | Arguments)* |
| |
| // Parse the initial primary or function expression. |
| Expression result = kUnknownExpression; |
| if (peek() == i::Token::FUNCTION) { |
| Consume(i::Token::FUNCTION); |
| if (peek_any_identifier()) { |
| ParseIdentifier(CHECK_OK); |
| } |
| result = ParseFunctionLiteral(CHECK_OK); |
| } else { |
| result = ParsePrimaryExpression(CHECK_OK); |
| } |
| |
| while (true) { |
| switch (peek()) { |
| case i::Token::LBRACK: { |
| Consume(i::Token::LBRACK); |
| ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RBRACK, CHECK_OK); |
| if (result == kThisExpression) { |
| result = kThisPropertyExpression; |
| } else { |
| result = kUnknownExpression; |
| } |
| break; |
| } |
| case i::Token::PERIOD: { |
| Consume(i::Token::PERIOD); |
| ParseIdentifierName(CHECK_OK); |
| if (result == kThisExpression) { |
| result = kThisPropertyExpression; |
| } else { |
| result = kUnknownExpression; |
| } |
| break; |
| } |
| case i::Token::LPAREN: { |
| if (new_count == 0) return result; |
| // Consume one of the new prefixes (already parsed). |
| ParseArguments(CHECK_OK); |
| new_count--; |
| result = kUnknownExpression; |
| break; |
| } |
| default: |
| return result; |
| } |
| } |
| } |
| |
| |
| PreParser::Expression PreParser::ParsePrimaryExpression(bool* ok) { |
| // PrimaryExpression :: |
| // 'this' |
| // 'null' |
| // 'true' |
| // 'false' |
| // Identifier |
| // Number |
| // String |
| // ArrayLiteral |
| // ObjectLiteral |
| // RegExpLiteral |
| // '(' Expression ')' |
| |
| Expression result = kUnknownExpression; |
| switch (peek()) { |
| case i::Token::THIS: { |
| Next(); |
| result = kThisExpression; |
| break; |
| } |
| |
| case i::Token::IDENTIFIER: |
| case i::Token::FUTURE_RESERVED_WORD: { |
| ParseIdentifier(CHECK_OK); |
| result = kIdentifierExpression; |
| break; |
| } |
| |
| case i::Token::NULL_LITERAL: |
| case i::Token::TRUE_LITERAL: |
| case i::Token::FALSE_LITERAL: |
| case i::Token::NUMBER: { |
| Next(); |
| break; |
| } |
| case i::Token::STRING: { |
| Next(); |
| result = GetStringSymbol(); |
| break; |
| } |
| |
| case i::Token::ASSIGN_DIV: |
| result = ParseRegExpLiteral(true, CHECK_OK); |
| break; |
| |
| case i::Token::DIV: |
| result = ParseRegExpLiteral(false, CHECK_OK); |
| break; |
| |
| case i::Token::LBRACK: |
| result = ParseArrayLiteral(CHECK_OK); |
| break; |
| |
| case i::Token::LBRACE: |
| result = ParseObjectLiteral(CHECK_OK); |
| break; |
| |
| case i::Token::LPAREN: |
| Consume(i::Token::LPAREN); |
| parenthesized_function_ = (peek() == i::Token::FUNCTION); |
| result = ParseExpression(true, CHECK_OK); |
| Expect(i::Token::RPAREN, CHECK_OK); |
| if (result == kIdentifierExpression) result = kUnknownExpression; |
| break; |
| |
| case i::Token::MOD: |
| result = ParseV8Intrinsic(CHECK_OK); |
| break; |
| |
| default: { |
| Next(); |
| *ok = false; |
| return kUnknownExpression; |
| } |
| } |
| |
| return result; |
| } |
| |
| |
| PreParser::Expression PreParser::ParseArrayLiteral(bool* ok) { |
| // ArrayLiteral :: |
| // '[' Expression? (',' Expression?)* ']' |
| Expect(i::Token::LBRACK, CHECK_OK); |
| while (peek() != i::Token::RBRACK) { |
| if (peek() != i::Token::COMMA) { |
| ParseAssignmentExpression(true, CHECK_OK); |
| } |
| if (peek() != i::Token::RBRACK) { |
| Expect(i::Token::COMMA, CHECK_OK); |
| } |
| } |
| Expect(i::Token::RBRACK, CHECK_OK); |
| |
| scope_->NextMaterializedLiteralIndex(); |
| return kUnknownExpression; |
| } |
| |
| |
| PreParser::Expression PreParser::ParseObjectLiteral(bool* ok) { |
| // ObjectLiteral :: |
| // '{' ( |
| // ((IdentifierName | String | Number) ':' AssignmentExpression) |
| // | (('get' | 'set') (IdentifierName | String | Number) FunctionLiteral) |
| // )*[','] '}' |
| |
| Expect(i::Token::LBRACE, CHECK_OK); |
| while (peek() != i::Token::RBRACE) { |
| i::Token::Value next = peek(); |
| switch (next) { |
| case i::Token::IDENTIFIER: |
| case i::Token::FUTURE_RESERVED_WORD: { |
| bool is_getter = false; |
| bool is_setter = false; |
| ParseIdentifierOrGetOrSet(&is_getter, &is_setter, CHECK_OK); |
| if ((is_getter || is_setter) && peek() != i::Token::COLON) { |
| i::Token::Value name = Next(); |
| bool is_keyword = i::Token::IsKeyword(name); |
| if (name != i::Token::IDENTIFIER && |
| name != i::Token::FUTURE_RESERVED_WORD && |
| name != i::Token::NUMBER && |
| name != i::Token::STRING && |
| !is_keyword) { |
| *ok = false; |
| return kUnknownExpression; |
| } |
| if (!is_keyword) { |
| LogSymbol(); |
| } |
| ParseFunctionLiteral(CHECK_OK); |
| if (peek() != i::Token::RBRACE) { |
| Expect(i::Token::COMMA, CHECK_OK); |
| } |
| continue; // restart the while |
| } |
| break; |
| } |
| case i::Token::STRING: |
| Consume(next); |
| GetStringSymbol(); |
| break; |
| case i::Token::NUMBER: |
| Consume(next); |
| break; |
| default: |
| if (i::Token::IsKeyword(next)) { |
| Consume(next); |
| } else { |
| // Unexpected token. |
| *ok = false; |
| return kUnknownExpression; |
| } |
| } |
| |
| Expect(i::Token::COLON, CHECK_OK); |
| ParseAssignmentExpression(true, CHECK_OK); |
| |
| // TODO(1240767): Consider allowing trailing comma. |
| if (peek() != i::Token::RBRACE) Expect(i::Token::COMMA, CHECK_OK); |
| } |
| Expect(i::Token::RBRACE, CHECK_OK); |
| |
| scope_->NextMaterializedLiteralIndex(); |
| return kUnknownExpression; |
| } |
| |
| |
| PreParser::Expression PreParser::ParseRegExpLiteral(bool seen_equal, |
| bool* ok) { |
| if (!scanner_->ScanRegExpPattern(seen_equal)) { |
| Next(); |
| i::JavaScriptScanner::Location location = scanner_->location(); |
| ReportMessageAt(location.beg_pos, location.end_pos, |
| "unterminated_regexp", NULL); |
| *ok = false; |
| return kUnknownExpression; |
| } |
| |
| scope_->NextMaterializedLiteralIndex(); |
| |
| if (!scanner_->ScanRegExpFlags()) { |
| Next(); |
| i::JavaScriptScanner::Location location = scanner_->location(); |
| ReportMessageAt(location.beg_pos, location.end_pos, |
| "invalid_regexp_flags", NULL); |
| *ok = false; |
| return kUnknownExpression; |
| } |
| Next(); |
| return kUnknownExpression; |
| } |
| |
| |
| PreParser::Arguments PreParser::ParseArguments(bool* ok) { |
| // Arguments :: |
| // '(' (AssignmentExpression)*[','] ')' |
| |
| Expect(i::Token::LPAREN, CHECK_OK); |
| bool done = (peek() == i::Token::RPAREN); |
| int argc = 0; |
| while (!done) { |
| ParseAssignmentExpression(true, CHECK_OK); |
| argc++; |
| done = (peek() == i::Token::RPAREN); |
| if (!done) Expect(i::Token::COMMA, CHECK_OK); |
| } |
| Expect(i::Token::RPAREN, CHECK_OK); |
| return argc; |
| } |
| |
| |
| PreParser::Expression PreParser::ParseFunctionLiteral(bool* ok) { |
| // Function :: |
| // '(' FormalParameterList? ')' '{' FunctionBody '}' |
| |
| // Parse function body. |
| ScopeType outer_scope_type = scope_->type(); |
| bool inside_with = scope_->IsInsideWith(); |
| Scope function_scope(&scope_, kFunctionScope); |
| |
| // FormalParameterList :: |
| // '(' (Identifier)*[','] ')' |
| Expect(i::Token::LPAREN, CHECK_OK); |
| bool done = (peek() == i::Token::RPAREN); |
| while (!done) { |
| ParseIdentifier(CHECK_OK); |
| done = (peek() == i::Token::RPAREN); |
| if (!done) { |
| Expect(i::Token::COMMA, CHECK_OK); |
| } |
| } |
| Expect(i::Token::RPAREN, CHECK_OK); |
| |
| Expect(i::Token::LBRACE, CHECK_OK); |
| int function_block_pos = scanner_->location().beg_pos; |
| |
| // Determine if the function will be lazily compiled. |
| // Currently only happens to top-level functions. |
| // Optimistically assume that all top-level functions are lazily compiled. |
| bool is_lazily_compiled = (outer_scope_type == kTopLevelScope && |
| !inside_with && allow_lazy_ && |
| !parenthesized_function_); |
| parenthesized_function_ = false; |
| |
| if (is_lazily_compiled) { |
| log_->PauseRecording(); |
| ParseSourceElements(i::Token::RBRACE, ok); |
| log_->ResumeRecording(); |
| if (!*ok) return kUnknownExpression; |
| |
| Expect(i::Token::RBRACE, CHECK_OK); |
| |
| // Position right after terminal '}'. |
| int end_pos = scanner_->location().end_pos; |
| log_->LogFunction(function_block_pos, end_pos, |
| function_scope.materialized_literal_count(), |
| function_scope.expected_properties()); |
| } else { |
| ParseSourceElements(i::Token::RBRACE, CHECK_OK); |
| Expect(i::Token::RBRACE, CHECK_OK); |
| } |
| return kUnknownExpression; |
| } |
| |
| |
| PreParser::Expression PreParser::ParseV8Intrinsic(bool* ok) { |
| // CallRuntime :: |
| // '%' Identifier Arguments |
| |
| Expect(i::Token::MOD, CHECK_OK); |
| ParseIdentifier(CHECK_OK); |
| ParseArguments(CHECK_OK); |
| |
| return kUnknownExpression; |
| } |
| |
| |
| void PreParser::ExpectSemicolon(bool* ok) { |
| // Check for automatic semicolon insertion according to |
| // the rules given in ECMA-262, section 7.9, page 21. |
| i::Token::Value tok = peek(); |
| if (tok == i::Token::SEMICOLON) { |
| Next(); |
| return; |
| } |
| if (scanner_->has_line_terminator_before_next() || |
| tok == i::Token::RBRACE || |
| tok == i::Token::EOS) { |
| return; |
| } |
| Expect(i::Token::SEMICOLON, ok); |
| } |
| |
| |
| void PreParser::LogSymbol() { |
| int identifier_pos = scanner_->location().beg_pos; |
| if (scanner_->is_literal_ascii()) { |
| log_->LogAsciiSymbol(identifier_pos, scanner_->literal_ascii_string()); |
| } else { |
| log_->LogUC16Symbol(identifier_pos, scanner_->literal_uc16_string()); |
| } |
| } |
| |
| |
| PreParser::Identifier PreParser::GetIdentifierSymbol() { |
| LogSymbol(); |
| return kUnknownIdentifier; |
| } |
| |
| |
| PreParser::Expression PreParser::GetStringSymbol() { |
| LogSymbol(); |
| return kUnknownExpression; |
| } |
| |
| |
| PreParser::Identifier PreParser::ParseIdentifier(bool* ok) { |
| if (!Check(i::Token::FUTURE_RESERVED_WORD)) { |
| Expect(i::Token::IDENTIFIER, ok); |
| } |
| if (!*ok) return kUnknownIdentifier; |
| return GetIdentifierSymbol(); |
| } |
| |
| |
| PreParser::Identifier PreParser::ParseIdentifierName(bool* ok) { |
| i::Token::Value next = Next(); |
| if (i::Token::IsKeyword(next)) { |
| int pos = scanner_->location().beg_pos; |
| const char* keyword = i::Token::String(next); |
| log_->LogAsciiSymbol(pos, i::Vector<const char>(keyword, |
| i::StrLength(keyword))); |
| return kUnknownExpression; |
| } |
| if (next == i::Token::IDENTIFIER || |
| next == i::Token::FUTURE_RESERVED_WORD) { |
| return GetIdentifierSymbol(); |
| } |
| *ok = false; |
| return kUnknownIdentifier; |
| } |
| |
| |
| // This function reads an identifier and determines whether or not it |
| // is 'get' or 'set'. |
| PreParser::Identifier PreParser::ParseIdentifierOrGetOrSet(bool* is_get, |
| bool* is_set, |
| bool* ok) { |
| PreParser::Identifier result = ParseIdentifier(CHECK_OK); |
| if (scanner_->is_literal_ascii() && scanner_->literal_length() == 3) { |
| const char* token = scanner_->literal_ascii_string().start(); |
| *is_get = strncmp(token, "get", 3) == 0; |
| *is_set = !*is_get && strncmp(token, "set", 3) == 0; |
| } |
| return result; |
| } |
| |
| bool PreParser::peek_any_identifier() { |
| i::Token::Value next = peek(); |
| return next == i::Token::IDENTIFIER || |
| next == i::Token::FUTURE_RESERVED_WORD; |
| } |
| |
| #undef CHECK_OK |
| } } // v8::preparser |