| // Copyright 2010 the V8 project authors. All rights reserved. |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include "v8.h" |
| |
| #include "codegen.h" |
| #include "deoptimizer.h" |
| #include "full-codegen.h" |
| #include "safepoint-table.h" |
| |
| namespace v8 { |
| namespace internal { |
| |
| int Deoptimizer::table_entry_size_ = 16; |
| |
| void Deoptimizer::DeoptimizeFunction(JSFunction* function) { |
| AssertNoAllocation no_allocation; |
| |
| if (!function->IsOptimized()) return; |
| |
| // Get the optimized code. |
| Code* code = function->code(); |
| |
| // Invalidate the relocation information, as it will become invalid by the |
| // code patching below, and is not needed any more. |
| code->InvalidateRelocation(); |
| |
| // For each return after a safepoint insert an absolute call to the |
| // corresponding deoptimization entry. |
| unsigned last_pc_offset = 0; |
| SafepointTable table(function->code()); |
| for (unsigned i = 0; i < table.length(); i++) { |
| unsigned pc_offset = table.GetPcOffset(i); |
| SafepointEntry safepoint_entry = table.GetEntry(i); |
| int deoptimization_index = safepoint_entry.deoptimization_index(); |
| int gap_code_size = safepoint_entry.gap_code_size(); |
| // Check that we did not shoot past next safepoint. |
| // TODO(srdjan): How do we guarantee that safepoint code does not |
| // overlap other safepoint patching code? |
| CHECK(pc_offset >= last_pc_offset); |
| #ifdef DEBUG |
| // Destroy the code which is not supposed to be run again. |
| int instructions = (pc_offset - last_pc_offset) / Assembler::kInstrSize; |
| CodePatcher destroyer(code->instruction_start() + last_pc_offset, |
| instructions); |
| for (int x = 0; x < instructions; x++) { |
| destroyer.masm()->bkpt(0); |
| } |
| #endif |
| last_pc_offset = pc_offset; |
| if (deoptimization_index != Safepoint::kNoDeoptimizationIndex) { |
| const int kCallInstructionSizeInWords = 3; |
| CodePatcher patcher(code->instruction_start() + pc_offset + gap_code_size, |
| kCallInstructionSizeInWords); |
| Address deoptimization_entry = Deoptimizer::GetDeoptimizationEntry( |
| deoptimization_index, Deoptimizer::LAZY); |
| patcher.masm()->Call(deoptimization_entry, RelocInfo::NONE); |
| last_pc_offset += |
| gap_code_size + kCallInstructionSizeInWords * Assembler::kInstrSize; |
| } |
| } |
| |
| |
| #ifdef DEBUG |
| // Destroy the code which is not supposed to be run again. |
| int instructions = |
| (code->safepoint_table_start() - last_pc_offset) / Assembler::kInstrSize; |
| CodePatcher destroyer(code->instruction_start() + last_pc_offset, |
| instructions); |
| for (int x = 0; x < instructions; x++) { |
| destroyer.masm()->bkpt(0); |
| } |
| #endif |
| |
| // Add the deoptimizing code to the list. |
| DeoptimizingCodeListNode* node = new DeoptimizingCodeListNode(code); |
| node->set_next(deoptimizing_code_list_); |
| deoptimizing_code_list_ = node; |
| |
| // Set the code for the function to non-optimized version. |
| function->ReplaceCode(function->shared()->code()); |
| |
| if (FLAG_trace_deopt) { |
| PrintF("[forced deoptimization: "); |
| function->PrintName(); |
| PrintF(" / %x]\n", reinterpret_cast<uint32_t>(function)); |
| } |
| } |
| |
| |
| void Deoptimizer::PatchStackCheckCode(RelocInfo* rinfo, |
| Code* replacement_code) { |
| UNIMPLEMENTED(); |
| } |
| |
| |
| void Deoptimizer::RevertStackCheckCode(RelocInfo* rinfo, Code* check_code) { |
| UNIMPLEMENTED(); |
| } |
| |
| |
| void Deoptimizer::DoComputeOsrOutputFrame() { |
| UNIMPLEMENTED(); |
| } |
| |
| |
| // This code is very similar to ia32 code, but relies on register names (fp, sp) |
| // and how the frame is laid out. |
| void Deoptimizer::DoComputeFrame(TranslationIterator* iterator, |
| int frame_index) { |
| // Read the ast node id, function, and frame height for this output frame. |
| Translation::Opcode opcode = |
| static_cast<Translation::Opcode>(iterator->Next()); |
| USE(opcode); |
| ASSERT(Translation::FRAME == opcode); |
| int node_id = iterator->Next(); |
| JSFunction* function = JSFunction::cast(ComputeLiteral(iterator->Next())); |
| unsigned height = iterator->Next(); |
| unsigned height_in_bytes = height * kPointerSize; |
| if (FLAG_trace_deopt) { |
| PrintF(" translating "); |
| function->PrintName(); |
| PrintF(" => node=%d, height=%d\n", node_id, height_in_bytes); |
| } |
| |
| // The 'fixed' part of the frame consists of the incoming parameters and |
| // the part described by JavaScriptFrameConstants. |
| unsigned fixed_frame_size = ComputeFixedSize(function); |
| unsigned input_frame_size = input_->GetFrameSize(); |
| unsigned output_frame_size = height_in_bytes + fixed_frame_size; |
| |
| // Allocate and store the output frame description. |
| FrameDescription* output_frame = |
| new(output_frame_size) FrameDescription(output_frame_size, function); |
| |
| bool is_bottommost = (0 == frame_index); |
| bool is_topmost = (output_count_ - 1 == frame_index); |
| ASSERT(frame_index >= 0 && frame_index < output_count_); |
| ASSERT(output_[frame_index] == NULL); |
| output_[frame_index] = output_frame; |
| |
| // The top address for the bottommost output frame can be computed from |
| // the input frame pointer and the output frame's height. For all |
| // subsequent output frames, it can be computed from the previous one's |
| // top address and the current frame's size. |
| uint32_t top_address; |
| if (is_bottommost) { |
| // 2 = context and function in the frame. |
| top_address = |
| input_->GetRegister(fp.code()) - (2 * kPointerSize) - height_in_bytes; |
| } else { |
| top_address = output_[frame_index - 1]->GetTop() - output_frame_size; |
| } |
| output_frame->SetTop(top_address); |
| |
| // Compute the incoming parameter translation. |
| int parameter_count = function->shared()->formal_parameter_count() + 1; |
| unsigned output_offset = output_frame_size; |
| unsigned input_offset = input_frame_size; |
| for (int i = 0; i < parameter_count; ++i) { |
| output_offset -= kPointerSize; |
| DoTranslateCommand(iterator, frame_index, output_offset); |
| } |
| input_offset -= (parameter_count * kPointerSize); |
| |
| // There are no translation commands for the caller's pc and fp, the |
| // context, and the function. Synthesize their values and set them up |
| // explicitly. |
| // |
| // The caller's pc for the bottommost output frame is the same as in the |
| // input frame. For all subsequent output frames, it can be read from the |
| // previous one. This frame's pc can be computed from the non-optimized |
| // function code and AST id of the bailout. |
| output_offset -= kPointerSize; |
| input_offset -= kPointerSize; |
| intptr_t value; |
| if (is_bottommost) { |
| value = input_->GetFrameSlot(input_offset); |
| } else { |
| value = output_[frame_index - 1]->GetPc(); |
| } |
| output_frame->SetFrameSlot(output_offset, value); |
| if (FLAG_trace_deopt) { |
| PrintF(" 0x%08x: [top + %d] <- 0x%08x ; caller's pc\n", |
| top_address + output_offset, output_offset, value); |
| } |
| |
| // The caller's frame pointer for the bottommost output frame is the same |
| // as in the input frame. For all subsequent output frames, it can be |
| // read from the previous one. Also compute and set this frame's frame |
| // pointer. |
| output_offset -= kPointerSize; |
| input_offset -= kPointerSize; |
| if (is_bottommost) { |
| value = input_->GetFrameSlot(input_offset); |
| } else { |
| value = output_[frame_index - 1]->GetFp(); |
| } |
| output_frame->SetFrameSlot(output_offset, value); |
| intptr_t fp_value = top_address + output_offset; |
| ASSERT(!is_bottommost || input_->GetRegister(fp.code()) == fp_value); |
| output_frame->SetFp(fp_value); |
| if (is_topmost) { |
| output_frame->SetRegister(fp.code(), fp_value); |
| } |
| if (FLAG_trace_deopt) { |
| PrintF(" 0x%08x: [top + %d] <- 0x%08x ; caller's fp\n", |
| fp_value, output_offset, value); |
| } |
| |
| // The context can be gotten from the function so long as we don't |
| // optimize functions that need local contexts. |
| output_offset -= kPointerSize; |
| input_offset -= kPointerSize; |
| value = reinterpret_cast<intptr_t>(function->context()); |
| // The context for the bottommost output frame should also agree with the |
| // input frame. |
| ASSERT(!is_bottommost || input_->GetFrameSlot(input_offset) == value); |
| output_frame->SetFrameSlot(output_offset, value); |
| if (is_topmost) { |
| output_frame->SetRegister(cp.code(), value); |
| } |
| if (FLAG_trace_deopt) { |
| PrintF(" 0x%08x: [top + %d] <- 0x%08x ; context\n", |
| top_address + output_offset, output_offset, value); |
| } |
| |
| // The function was mentioned explicitly in the BEGIN_FRAME. |
| output_offset -= kPointerSize; |
| input_offset -= kPointerSize; |
| value = reinterpret_cast<uint32_t>(function); |
| // The function for the bottommost output frame should also agree with the |
| // input frame. |
| ASSERT(!is_bottommost || input_->GetFrameSlot(input_offset) == value); |
| output_frame->SetFrameSlot(output_offset, value); |
| if (FLAG_trace_deopt) { |
| PrintF(" 0x%08x: [top + %d] <- 0x%08x ; function\n", |
| top_address + output_offset, output_offset, value); |
| } |
| |
| // Translate the rest of the frame. |
| for (unsigned i = 0; i < height; ++i) { |
| output_offset -= kPointerSize; |
| DoTranslateCommand(iterator, frame_index, output_offset); |
| } |
| ASSERT(0 == output_offset); |
| |
| // Compute this frame's PC, state, and continuation. |
| Code* non_optimized_code = function->shared()->code(); |
| FixedArray* raw_data = non_optimized_code->deoptimization_data(); |
| DeoptimizationOutputData* data = DeoptimizationOutputData::cast(raw_data); |
| Address start = non_optimized_code->instruction_start(); |
| unsigned pc_and_state = GetOutputInfo(data, node_id, function->shared()); |
| unsigned pc_offset = FullCodeGenerator::PcField::decode(pc_and_state); |
| uint32_t pc_value = reinterpret_cast<uint32_t>(start + pc_offset); |
| output_frame->SetPc(pc_value); |
| if (is_topmost) { |
| output_frame->SetRegister(pc.code(), pc_value); |
| } |
| |
| FullCodeGenerator::State state = |
| FullCodeGenerator::StateField::decode(pc_and_state); |
| output_frame->SetState(Smi::FromInt(state)); |
| |
| // Set the continuation for the topmost frame. |
| if (is_topmost) { |
| Code* continuation = (bailout_type_ == EAGER) |
| ? Builtins::builtin(Builtins::NotifyDeoptimized) |
| : Builtins::builtin(Builtins::NotifyLazyDeoptimized); |
| output_frame->SetContinuation( |
| reinterpret_cast<uint32_t>(continuation->entry())); |
| } |
| |
| if (output_count_ - 1 == frame_index) iterator->Done(); |
| } |
| |
| |
| #define __ masm()-> |
| |
| |
| // This code tries to be close to ia32 code so that any changes can be |
| // easily ported. |
| void Deoptimizer::EntryGenerator::Generate() { |
| GeneratePrologue(); |
| // TOS: bailout-id; TOS+1: return address if not EAGER. |
| CpuFeatures::Scope scope(VFP3); |
| // Save all general purpose registers before messing with them. |
| const int kNumberOfRegisters = Register::kNumRegisters; |
| |
| // Everything but pc, lr and ip which will be saved but not restored. |
| RegList restored_regs = kJSCallerSaved | kCalleeSaved | ip.bit(); |
| |
| const int kDoubleRegsSize = |
| kDoubleSize * DwVfpRegister::kNumAllocatableRegisters; |
| |
| // Save all general purpose registers before messing with them. |
| __ sub(sp, sp, Operand(kDoubleRegsSize)); |
| for (int i = 0; i < DwVfpRegister::kNumAllocatableRegisters; ++i) { |
| DwVfpRegister vfp_reg = DwVfpRegister::FromAllocationIndex(i); |
| int offset = i * kDoubleSize; |
| __ vstr(vfp_reg, sp, offset); |
| } |
| |
| // Push all 16 registers (needed to populate FrameDescription::registers_). |
| __ stm(db_w, sp, restored_regs | sp.bit() | lr.bit() | pc.bit()); |
| |
| const int kSavedRegistersAreaSize = |
| (kNumberOfRegisters * kPointerSize) + kDoubleRegsSize; |
| |
| // Get the bailout id from the stack. |
| __ ldr(r2, MemOperand(sp, kSavedRegistersAreaSize)); |
| |
| // Get the address of the location in the code object if possible (r3) (return |
| // address for lazy deoptimization) and compute the fp-to-sp delta in |
| // register r4. |
| if (type() == EAGER) { |
| __ mov(r3, Operand(0)); |
| // Correct one word for bailout id. |
| __ add(r4, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize))); |
| } else { |
| __ mov(r3, lr); |
| // Correct two words for bailout id and return address. |
| __ add(r4, sp, Operand(kSavedRegistersAreaSize + (2 * kPointerSize))); |
| } |
| __ sub(r4, fp, r4); |
| |
| // Allocate a new deoptimizer object. |
| // Pass four arguments in r0 to r3 and fifth argument on stack. |
| __ PrepareCallCFunction(5, r5); |
| __ ldr(r0, MemOperand(fp, JavaScriptFrameConstants::kFunctionOffset)); |
| __ mov(r1, Operand(type())); // bailout type, |
| // r2: bailout id already loaded. |
| // r3: code address or 0 already loaded. |
| __ str(r4, MemOperand(sp, 0 * kPointerSize)); // Fp-to-sp delta. |
| // Call Deoptimizer::New(). |
| __ CallCFunction(ExternalReference::new_deoptimizer_function(), 5); |
| |
| // Preserve "deoptimizer" object in register r0 and get the input |
| // frame descriptor pointer to r1 (deoptimizer->input_); |
| __ ldr(r1, MemOperand(r0, Deoptimizer::input_offset())); |
| |
| |
| // Copy core registers into FrameDescription::registers_[kNumRegisters]. |
| ASSERT(Register::kNumRegisters == kNumberOfRegisters); |
| for (int i = 0; i < kNumberOfRegisters; i++) { |
| int offset = (i * kIntSize) + FrameDescription::registers_offset(); |
| __ ldr(r2, MemOperand(sp, i * kPointerSize)); |
| __ str(r2, MemOperand(r1, offset)); |
| } |
| |
| // Copy VFP registers to |
| // double_registers_[DoubleRegister::kNumAllocatableRegisters] |
| int double_regs_offset = FrameDescription::double_registers_offset(); |
| for (int i = 0; i < DwVfpRegister::kNumAllocatableRegisters; ++i) { |
| int dst_offset = i * kDoubleSize + double_regs_offset; |
| int src_offset = i * kDoubleSize + kNumberOfRegisters * kPointerSize; |
| __ vldr(d0, sp, src_offset); |
| __ vstr(d0, r1, dst_offset); |
| } |
| |
| // Remove the bailout id, eventually return address, and the saved registers |
| // from the stack. |
| if (type() == EAGER) { |
| __ add(sp, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize))); |
| } else { |
| __ add(sp, sp, Operand(kSavedRegistersAreaSize + (2 * kPointerSize))); |
| } |
| |
| // Compute a pointer to the unwinding limit in register r2; that is |
| // the first stack slot not part of the input frame. |
| __ ldr(r2, MemOperand(r1, FrameDescription::frame_size_offset())); |
| __ add(r2, r2, sp); |
| |
| // Unwind the stack down to - but not including - the unwinding |
| // limit and copy the contents of the activation frame to the input |
| // frame description. |
| __ add(r3, r1, Operand(FrameDescription::frame_content_offset())); |
| Label pop_loop; |
| __ bind(&pop_loop); |
| __ pop(r4); |
| __ str(r4, MemOperand(r3, 0)); |
| __ add(r3, r3, Operand(sizeof(uint32_t))); |
| __ cmp(r2, sp); |
| __ b(ne, &pop_loop); |
| |
| // Compute the output frame in the deoptimizer. |
| __ push(r0); // Preserve deoptimizer object across call. |
| // r0: deoptimizer object; r1: scratch. |
| __ PrepareCallCFunction(1, r1); |
| // Call Deoptimizer::ComputeOutputFrames(). |
| __ CallCFunction(ExternalReference::compute_output_frames_function(), 1); |
| __ pop(r0); // Restore deoptimizer object (class Deoptimizer). |
| |
| // Replace the current (input) frame with the output frames. |
| Label outer_push_loop, inner_push_loop; |
| // Outer loop state: r0 = current "FrameDescription** output_", |
| // r1 = one past the last FrameDescription**. |
| __ ldr(r1, MemOperand(r0, Deoptimizer::output_count_offset())); |
| __ ldr(r0, MemOperand(r0, Deoptimizer::output_offset())); // r0 is output_. |
| __ add(r1, r0, Operand(r1, LSL, 2)); |
| __ bind(&outer_push_loop); |
| // Inner loop state: r2 = current FrameDescription*, r3 = loop index. |
| __ ldr(r2, MemOperand(r0, 0)); // output_[ix] |
| __ ldr(r3, MemOperand(r2, FrameDescription::frame_size_offset())); |
| __ bind(&inner_push_loop); |
| __ sub(r3, r3, Operand(sizeof(uint32_t))); |
| // __ add(r6, r2, Operand(r3, LSL, 1)); |
| __ add(r6, r2, Operand(r3)); |
| __ ldr(r7, MemOperand(r6, FrameDescription::frame_content_offset())); |
| __ push(r7); |
| __ cmp(r3, Operand(0)); |
| __ b(ne, &inner_push_loop); // test for gt? |
| __ add(r0, r0, Operand(kPointerSize)); |
| __ cmp(r0, r1); |
| __ b(lt, &outer_push_loop); |
| |
| // In case of OSR, we have to restore the XMM registers. |
| if (type() == OSR) { |
| UNIMPLEMENTED(); |
| } |
| |
| // Push state, pc, and continuation from the last output frame. |
| if (type() != OSR) { |
| __ ldr(r6, MemOperand(r2, FrameDescription::state_offset())); |
| __ push(r6); |
| } |
| |
| __ ldr(r6, MemOperand(r2, FrameDescription::pc_offset())); |
| __ push(r6); |
| __ ldr(r6, MemOperand(r2, FrameDescription::continuation_offset())); |
| __ push(r6); |
| |
| // Push the registers from the last output frame. |
| for (int i = kNumberOfRegisters - 1; i >= 0; i--) { |
| int offset = (i * kIntSize) + FrameDescription::registers_offset(); |
| __ ldr(r6, MemOperand(r2, offset)); |
| __ push(r6); |
| } |
| |
| // Restore the registers from the stack. |
| __ ldm(ia_w, sp, restored_regs); // all but pc registers. |
| __ pop(ip); // remove sp |
| __ pop(ip); // remove lr |
| |
| // Set up the roots register. |
| ExternalReference roots_address = ExternalReference::roots_address(); |
| __ mov(r10, Operand(roots_address)); |
| |
| __ pop(ip); // remove pc |
| __ pop(r7); // get continuation, leave pc on stack |
| __ pop(lr); |
| __ Jump(r7); |
| __ stop("Unreachable."); |
| } |
| |
| |
| void Deoptimizer::TableEntryGenerator::GeneratePrologue() { |
| // Create a sequence of deoptimization entries. Note that any |
| // registers may be still live. |
| Label done; |
| for (int i = 0; i < count(); i++) { |
| int start = masm()->pc_offset(); |
| USE(start); |
| if (type() == EAGER) { |
| __ nop(); |
| } else { |
| // Emulate ia32 like call by pushing return address to stack. |
| __ push(lr); |
| } |
| __ mov(ip, Operand(i)); |
| __ push(ip); |
| __ b(&done); |
| ASSERT(masm()->pc_offset() - start == table_entry_size_); |
| } |
| __ bind(&done); |
| } |
| |
| #undef __ |
| |
| } } // namespace v8::internal |