| // Copyright 2011 the V8 project authors. All rights reserved. |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| #include "v8.h" |
| |
| #include "codegen.h" |
| #include "deoptimizer.h" |
| #include "full-codegen.h" |
| #include "safepoint-table.h" |
| |
| namespace v8 { |
| namespace internal { |
| |
| const int Deoptimizer::table_entry_size_ = 16; |
| |
| |
| int Deoptimizer::patch_size() { |
| const int kCallInstructionSizeInWords = 3; |
| return kCallInstructionSizeInWords * Assembler::kInstrSize; |
| } |
| |
| |
| void Deoptimizer::DeoptimizeFunction(JSFunction* function) { |
| HandleScope scope; |
| AssertNoAllocation no_allocation; |
| |
| if (!function->IsOptimized()) return; |
| |
| // Get the optimized code. |
| Code* code = function->code(); |
| Address code_start_address = code->instruction_start(); |
| |
| // Invalidate the relocation information, as it will become invalid by the |
| // code patching below, and is not needed any more. |
| code->InvalidateRelocation(); |
| |
| // For each LLazyBailout instruction insert a call to the corresponding |
| // deoptimization entry. |
| DeoptimizationInputData* deopt_data = |
| DeoptimizationInputData::cast(code->deoptimization_data()); |
| #ifdef DEBUG |
| Address prev_call_address = NULL; |
| #endif |
| for (int i = 0; i < deopt_data->DeoptCount(); i++) { |
| if (deopt_data->Pc(i)->value() == -1) continue; |
| Address call_address = code_start_address + deopt_data->Pc(i)->value(); |
| Address deopt_entry = GetDeoptimizationEntry(i, LAZY); |
| int call_size_in_bytes = MacroAssembler::CallSize(deopt_entry, |
| RelocInfo::NONE); |
| int call_size_in_words = call_size_in_bytes / Assembler::kInstrSize; |
| ASSERT(call_size_in_bytes % Assembler::kInstrSize == 0); |
| ASSERT(call_size_in_bytes <= patch_size()); |
| CodePatcher patcher(call_address, call_size_in_words); |
| patcher.masm()->Call(deopt_entry, RelocInfo::NONE); |
| ASSERT(prev_call_address == NULL || |
| call_address >= prev_call_address + patch_size()); |
| ASSERT(call_address + patch_size() <= code->instruction_end()); |
| |
| #ifdef DEBUG |
| prev_call_address = call_address; |
| #endif |
| } |
| |
| // Add the deoptimizing code to the list. |
| DeoptimizingCodeListNode* node = new DeoptimizingCodeListNode(code); |
| DeoptimizerData* data = code->GetIsolate()->deoptimizer_data(); |
| node->set_next(data->deoptimizing_code_list_); |
| data->deoptimizing_code_list_ = node; |
| |
| // Set the code for the function to non-optimized version. |
| function->ReplaceCode(function->shared()->code()); |
| |
| if (FLAG_trace_deopt) { |
| PrintF("[forced deoptimization: "); |
| function->PrintName(); |
| PrintF(" / %x]\n", reinterpret_cast<uint32_t>(function)); |
| } |
| } |
| |
| |
| void Deoptimizer::PatchStackCheckCodeAt(Address pc_after, |
| Code* check_code, |
| Code* replacement_code) { |
| const int kInstrSize = Assembler::kInstrSize; |
| // The call of the stack guard check has the following form: |
| // e1 5d 00 0c cmp sp, <limit> |
| // 2a 00 00 01 bcs ok |
| // e5 9f c? ?? ldr ip, [pc, <stack guard address>] |
| // e1 2f ff 3c blx ip |
| ASSERT(Memory::int32_at(pc_after - kInstrSize) == |
| (al | B24 | B21 | 15*B16 | 15*B12 | 15*B8 | BLX | ip.code())); |
| ASSERT(Assembler::IsLdrPcImmediateOffset( |
| Assembler::instr_at(pc_after - 2 * kInstrSize))); |
| |
| // We patch the code to the following form: |
| // e1 5d 00 0c cmp sp, <limit> |
| // e1 a0 00 00 mov r0, r0 (NOP) |
| // e5 9f c? ?? ldr ip, [pc, <on-stack replacement address>] |
| // e1 2f ff 3c blx ip |
| // and overwrite the constant containing the |
| // address of the stack check stub. |
| |
| // Replace conditional jump with NOP. |
| CodePatcher patcher(pc_after - 3 * kInstrSize, 1); |
| patcher.masm()->nop(); |
| |
| // Replace the stack check address in the constant pool |
| // with the entry address of the replacement code. |
| uint32_t stack_check_address_offset = Memory::uint16_at(pc_after - |
| 2 * kInstrSize) & 0xfff; |
| Address stack_check_address_pointer = pc_after + stack_check_address_offset; |
| ASSERT(Memory::uint32_at(stack_check_address_pointer) == |
| reinterpret_cast<uint32_t>(check_code->entry())); |
| Memory::uint32_at(stack_check_address_pointer) = |
| reinterpret_cast<uint32_t>(replacement_code->entry()); |
| } |
| |
| |
| void Deoptimizer::RevertStackCheckCodeAt(Address pc_after, |
| Code* check_code, |
| Code* replacement_code) { |
| const int kInstrSize = Assembler::kInstrSize; |
| ASSERT(Memory::uint32_at(pc_after - kInstrSize) == 0xe12fff3c); |
| ASSERT(Memory::uint8_at(pc_after - kInstrSize - 1) == 0xe5); |
| ASSERT(Memory::uint8_at(pc_after - kInstrSize - 2) == 0x9f); |
| |
| // Replace NOP with conditional jump. |
| CodePatcher patcher(pc_after - 3 * kInstrSize, 1); |
| patcher.masm()->b(+4, cs); |
| |
| // Replace the stack check address in the constant pool |
| // with the entry address of the replacement code. |
| uint32_t stack_check_address_offset = Memory::uint16_at(pc_after - |
| 2 * kInstrSize) & 0xfff; |
| Address stack_check_address_pointer = pc_after + stack_check_address_offset; |
| ASSERT(Memory::uint32_at(stack_check_address_pointer) == |
| reinterpret_cast<uint32_t>(replacement_code->entry())); |
| Memory::uint32_at(stack_check_address_pointer) = |
| reinterpret_cast<uint32_t>(check_code->entry()); |
| } |
| |
| |
| static int LookupBailoutId(DeoptimizationInputData* data, unsigned ast_id) { |
| ByteArray* translations = data->TranslationByteArray(); |
| int length = data->DeoptCount(); |
| for (int i = 0; i < length; i++) { |
| if (static_cast<unsigned>(data->AstId(i)->value()) == ast_id) { |
| TranslationIterator it(translations, data->TranslationIndex(i)->value()); |
| int value = it.Next(); |
| ASSERT(Translation::BEGIN == static_cast<Translation::Opcode>(value)); |
| // Read the number of frames. |
| value = it.Next(); |
| if (value == 1) return i; |
| } |
| } |
| UNREACHABLE(); |
| return -1; |
| } |
| |
| |
| void Deoptimizer::DoComputeOsrOutputFrame() { |
| DeoptimizationInputData* data = DeoptimizationInputData::cast( |
| optimized_code_->deoptimization_data()); |
| unsigned ast_id = data->OsrAstId()->value(); |
| |
| int bailout_id = LookupBailoutId(data, ast_id); |
| unsigned translation_index = data->TranslationIndex(bailout_id)->value(); |
| ByteArray* translations = data->TranslationByteArray(); |
| |
| TranslationIterator iterator(translations, translation_index); |
| Translation::Opcode opcode = |
| static_cast<Translation::Opcode>(iterator.Next()); |
| ASSERT(Translation::BEGIN == opcode); |
| USE(opcode); |
| int count = iterator.Next(); |
| ASSERT(count == 1); |
| USE(count); |
| |
| opcode = static_cast<Translation::Opcode>(iterator.Next()); |
| USE(opcode); |
| ASSERT(Translation::FRAME == opcode); |
| unsigned node_id = iterator.Next(); |
| USE(node_id); |
| ASSERT(node_id == ast_id); |
| JSFunction* function = JSFunction::cast(ComputeLiteral(iterator.Next())); |
| USE(function); |
| ASSERT(function == function_); |
| unsigned height = iterator.Next(); |
| unsigned height_in_bytes = height * kPointerSize; |
| USE(height_in_bytes); |
| |
| unsigned fixed_size = ComputeFixedSize(function_); |
| unsigned input_frame_size = input_->GetFrameSize(); |
| ASSERT(fixed_size + height_in_bytes == input_frame_size); |
| |
| unsigned stack_slot_size = optimized_code_->stack_slots() * kPointerSize; |
| unsigned outgoing_height = data->ArgumentsStackHeight(bailout_id)->value(); |
| unsigned outgoing_size = outgoing_height * kPointerSize; |
| unsigned output_frame_size = fixed_size + stack_slot_size + outgoing_size; |
| ASSERT(outgoing_size == 0); // OSR does not happen in the middle of a call. |
| |
| if (FLAG_trace_osr) { |
| PrintF("[on-stack replacement: begin 0x%08" V8PRIxPTR " ", |
| reinterpret_cast<intptr_t>(function_)); |
| function_->PrintName(); |
| PrintF(" => node=%u, frame=%d->%d]\n", |
| ast_id, |
| input_frame_size, |
| output_frame_size); |
| } |
| |
| // There's only one output frame in the OSR case. |
| output_count_ = 1; |
| output_ = new FrameDescription*[1]; |
| output_[0] = new(output_frame_size) FrameDescription( |
| output_frame_size, function_); |
| #ifdef DEBUG |
| output_[0]->SetKind(Code::OPTIMIZED_FUNCTION); |
| #endif |
| |
| // Clear the incoming parameters in the optimized frame to avoid |
| // confusing the garbage collector. |
| unsigned output_offset = output_frame_size - kPointerSize; |
| int parameter_count = function_->shared()->formal_parameter_count() + 1; |
| for (int i = 0; i < parameter_count; ++i) { |
| output_[0]->SetFrameSlot(output_offset, 0); |
| output_offset -= kPointerSize; |
| } |
| |
| // Translate the incoming parameters. This may overwrite some of the |
| // incoming argument slots we've just cleared. |
| int input_offset = input_frame_size - kPointerSize; |
| bool ok = true; |
| int limit = input_offset - (parameter_count * kPointerSize); |
| while (ok && input_offset > limit) { |
| ok = DoOsrTranslateCommand(&iterator, &input_offset); |
| } |
| |
| // There are no translation commands for the caller's pc and fp, the |
| // context, and the function. Set them up explicitly. |
| for (int i = StandardFrameConstants::kCallerPCOffset; |
| ok && i >= StandardFrameConstants::kMarkerOffset; |
| i -= kPointerSize) { |
| uint32_t input_value = input_->GetFrameSlot(input_offset); |
| if (FLAG_trace_osr) { |
| const char* name = "UNKNOWN"; |
| switch (i) { |
| case StandardFrameConstants::kCallerPCOffset: |
| name = "caller's pc"; |
| break; |
| case StandardFrameConstants::kCallerFPOffset: |
| name = "fp"; |
| break; |
| case StandardFrameConstants::kContextOffset: |
| name = "context"; |
| break; |
| case StandardFrameConstants::kMarkerOffset: |
| name = "function"; |
| break; |
| } |
| PrintF(" [sp + %d] <- 0x%08x ; [sp + %d] (fixed part - %s)\n", |
| output_offset, |
| input_value, |
| input_offset, |
| name); |
| } |
| |
| output_[0]->SetFrameSlot(output_offset, input_->GetFrameSlot(input_offset)); |
| input_offset -= kPointerSize; |
| output_offset -= kPointerSize; |
| } |
| |
| // Translate the rest of the frame. |
| while (ok && input_offset >= 0) { |
| ok = DoOsrTranslateCommand(&iterator, &input_offset); |
| } |
| |
| // If translation of any command failed, continue using the input frame. |
| if (!ok) { |
| delete output_[0]; |
| output_[0] = input_; |
| output_[0]->SetPc(reinterpret_cast<uint32_t>(from_)); |
| } else { |
| // Setup the frame pointer and the context pointer. |
| output_[0]->SetRegister(fp.code(), input_->GetRegister(fp.code())); |
| output_[0]->SetRegister(cp.code(), input_->GetRegister(cp.code())); |
| |
| unsigned pc_offset = data->OsrPcOffset()->value(); |
| uint32_t pc = reinterpret_cast<uint32_t>( |
| optimized_code_->entry() + pc_offset); |
| output_[0]->SetPc(pc); |
| } |
| Code* continuation = isolate_->builtins()->builtin(Builtins::kNotifyOSR); |
| output_[0]->SetContinuation( |
| reinterpret_cast<uint32_t>(continuation->entry())); |
| |
| if (FLAG_trace_osr) { |
| PrintF("[on-stack replacement translation %s: 0x%08" V8PRIxPTR " ", |
| ok ? "finished" : "aborted", |
| reinterpret_cast<intptr_t>(function)); |
| function->PrintName(); |
| PrintF(" => pc=0x%0x]\n", output_[0]->GetPc()); |
| } |
| } |
| |
| |
| // This code is very similar to ia32 code, but relies on register names (fp, sp) |
| // and how the frame is laid out. |
| void Deoptimizer::DoComputeFrame(TranslationIterator* iterator, |
| int frame_index) { |
| // Read the ast node id, function, and frame height for this output frame. |
| Translation::Opcode opcode = |
| static_cast<Translation::Opcode>(iterator->Next()); |
| USE(opcode); |
| ASSERT(Translation::FRAME == opcode); |
| int node_id = iterator->Next(); |
| JSFunction* function = JSFunction::cast(ComputeLiteral(iterator->Next())); |
| unsigned height = iterator->Next(); |
| unsigned height_in_bytes = height * kPointerSize; |
| if (FLAG_trace_deopt) { |
| PrintF(" translating "); |
| function->PrintName(); |
| PrintF(" => node=%d, height=%d\n", node_id, height_in_bytes); |
| } |
| |
| // The 'fixed' part of the frame consists of the incoming parameters and |
| // the part described by JavaScriptFrameConstants. |
| unsigned fixed_frame_size = ComputeFixedSize(function); |
| unsigned input_frame_size = input_->GetFrameSize(); |
| unsigned output_frame_size = height_in_bytes + fixed_frame_size; |
| |
| // Allocate and store the output frame description. |
| FrameDescription* output_frame = |
| new(output_frame_size) FrameDescription(output_frame_size, function); |
| #ifdef DEBUG |
| output_frame->SetKind(Code::FUNCTION); |
| #endif |
| |
| bool is_bottommost = (0 == frame_index); |
| bool is_topmost = (output_count_ - 1 == frame_index); |
| ASSERT(frame_index >= 0 && frame_index < output_count_); |
| ASSERT(output_[frame_index] == NULL); |
| output_[frame_index] = output_frame; |
| |
| // The top address for the bottommost output frame can be computed from |
| // the input frame pointer and the output frame's height. For all |
| // subsequent output frames, it can be computed from the previous one's |
| // top address and the current frame's size. |
| uint32_t top_address; |
| if (is_bottommost) { |
| // 2 = context and function in the frame. |
| top_address = |
| input_->GetRegister(fp.code()) - (2 * kPointerSize) - height_in_bytes; |
| } else { |
| top_address = output_[frame_index - 1]->GetTop() - output_frame_size; |
| } |
| output_frame->SetTop(top_address); |
| |
| // Compute the incoming parameter translation. |
| int parameter_count = function->shared()->formal_parameter_count() + 1; |
| unsigned output_offset = output_frame_size; |
| unsigned input_offset = input_frame_size; |
| for (int i = 0; i < parameter_count; ++i) { |
| output_offset -= kPointerSize; |
| DoTranslateCommand(iterator, frame_index, output_offset); |
| } |
| input_offset -= (parameter_count * kPointerSize); |
| |
| // There are no translation commands for the caller's pc and fp, the |
| // context, and the function. Synthesize their values and set them up |
| // explicitly. |
| // |
| // The caller's pc for the bottommost output frame is the same as in the |
| // input frame. For all subsequent output frames, it can be read from the |
| // previous one. This frame's pc can be computed from the non-optimized |
| // function code and AST id of the bailout. |
| output_offset -= kPointerSize; |
| input_offset -= kPointerSize; |
| intptr_t value; |
| if (is_bottommost) { |
| value = input_->GetFrameSlot(input_offset); |
| } else { |
| value = output_[frame_index - 1]->GetPc(); |
| } |
| output_frame->SetFrameSlot(output_offset, value); |
| if (FLAG_trace_deopt) { |
| PrintF(" 0x%08x: [top + %d] <- 0x%08x ; caller's pc\n", |
| top_address + output_offset, output_offset, value); |
| } |
| |
| // The caller's frame pointer for the bottommost output frame is the same |
| // as in the input frame. For all subsequent output frames, it can be |
| // read from the previous one. Also compute and set this frame's frame |
| // pointer. |
| output_offset -= kPointerSize; |
| input_offset -= kPointerSize; |
| if (is_bottommost) { |
| value = input_->GetFrameSlot(input_offset); |
| } else { |
| value = output_[frame_index - 1]->GetFp(); |
| } |
| output_frame->SetFrameSlot(output_offset, value); |
| intptr_t fp_value = top_address + output_offset; |
| ASSERT(!is_bottommost || input_->GetRegister(fp.code()) == fp_value); |
| output_frame->SetFp(fp_value); |
| if (is_topmost) { |
| output_frame->SetRegister(fp.code(), fp_value); |
| } |
| if (FLAG_trace_deopt) { |
| PrintF(" 0x%08x: [top + %d] <- 0x%08x ; caller's fp\n", |
| fp_value, output_offset, value); |
| } |
| |
| // For the bottommost output frame the context can be gotten from the input |
| // frame. For all subsequent output frames it can be gotten from the function |
| // so long as we don't inline functions that need local contexts. |
| output_offset -= kPointerSize; |
| input_offset -= kPointerSize; |
| if (is_bottommost) { |
| value = input_->GetFrameSlot(input_offset); |
| } else { |
| value = reinterpret_cast<intptr_t>(function->context()); |
| } |
| output_frame->SetFrameSlot(output_offset, value); |
| if (is_topmost) { |
| output_frame->SetRegister(cp.code(), value); |
| } |
| if (FLAG_trace_deopt) { |
| PrintF(" 0x%08x: [top + %d] <- 0x%08x ; context\n", |
| top_address + output_offset, output_offset, value); |
| } |
| |
| // The function was mentioned explicitly in the BEGIN_FRAME. |
| output_offset -= kPointerSize; |
| input_offset -= kPointerSize; |
| value = reinterpret_cast<uint32_t>(function); |
| // The function for the bottommost output frame should also agree with the |
| // input frame. |
| ASSERT(!is_bottommost || input_->GetFrameSlot(input_offset) == value); |
| output_frame->SetFrameSlot(output_offset, value); |
| if (FLAG_trace_deopt) { |
| PrintF(" 0x%08x: [top + %d] <- 0x%08x ; function\n", |
| top_address + output_offset, output_offset, value); |
| } |
| |
| // Translate the rest of the frame. |
| for (unsigned i = 0; i < height; ++i) { |
| output_offset -= kPointerSize; |
| DoTranslateCommand(iterator, frame_index, output_offset); |
| } |
| ASSERT(0 == output_offset); |
| |
| // Compute this frame's PC, state, and continuation. |
| Code* non_optimized_code = function->shared()->code(); |
| FixedArray* raw_data = non_optimized_code->deoptimization_data(); |
| DeoptimizationOutputData* data = DeoptimizationOutputData::cast(raw_data); |
| Address start = non_optimized_code->instruction_start(); |
| unsigned pc_and_state = GetOutputInfo(data, node_id, function->shared()); |
| unsigned pc_offset = FullCodeGenerator::PcField::decode(pc_and_state); |
| uint32_t pc_value = reinterpret_cast<uint32_t>(start + pc_offset); |
| output_frame->SetPc(pc_value); |
| if (is_topmost) { |
| output_frame->SetRegister(pc.code(), pc_value); |
| } |
| |
| FullCodeGenerator::State state = |
| FullCodeGenerator::StateField::decode(pc_and_state); |
| output_frame->SetState(Smi::FromInt(state)); |
| |
| |
| // Set the continuation for the topmost frame. |
| if (is_topmost && bailout_type_ != DEBUGGER) { |
| Builtins* builtins = isolate_->builtins(); |
| Code* continuation = (bailout_type_ == EAGER) |
| ? builtins->builtin(Builtins::kNotifyDeoptimized) |
| : builtins->builtin(Builtins::kNotifyLazyDeoptimized); |
| output_frame->SetContinuation( |
| reinterpret_cast<uint32_t>(continuation->entry())); |
| } |
| } |
| |
| |
| void Deoptimizer::FillInputFrame(Address tos, JavaScriptFrame* frame) { |
| // Set the register values. The values are not important as there are no |
| // callee saved registers in JavaScript frames, so all registers are |
| // spilled. Registers fp and sp are set to the correct values though. |
| |
| for (int i = 0; i < Register::kNumRegisters; i++) { |
| input_->SetRegister(i, i * 4); |
| } |
| input_->SetRegister(sp.code(), reinterpret_cast<intptr_t>(frame->sp())); |
| input_->SetRegister(fp.code(), reinterpret_cast<intptr_t>(frame->fp())); |
| for (int i = 0; i < DoubleRegister::kNumAllocatableRegisters; i++) { |
| input_->SetDoubleRegister(i, 0.0); |
| } |
| |
| // Fill the frame content from the actual data on the frame. |
| for (unsigned i = 0; i < input_->GetFrameSize(); i += kPointerSize) { |
| input_->SetFrameSlot(i, Memory::uint32_at(tos + i)); |
| } |
| } |
| |
| |
| #define __ masm()-> |
| |
| // This code tries to be close to ia32 code so that any changes can be |
| // easily ported. |
| void Deoptimizer::EntryGenerator::Generate() { |
| GeneratePrologue(); |
| |
| Isolate* isolate = masm()->isolate(); |
| |
| CpuFeatures::Scope scope(VFP3); |
| // Save all general purpose registers before messing with them. |
| const int kNumberOfRegisters = Register::kNumRegisters; |
| |
| // Everything but pc, lr and ip which will be saved but not restored. |
| RegList restored_regs = kJSCallerSaved | kCalleeSaved | ip.bit(); |
| |
| const int kDoubleRegsSize = |
| kDoubleSize * DwVfpRegister::kNumAllocatableRegisters; |
| |
| // Save all VFP registers before messing with them. |
| DwVfpRegister first = DwVfpRegister::FromAllocationIndex(0); |
| DwVfpRegister last = |
| DwVfpRegister::FromAllocationIndex( |
| DwVfpRegister::kNumAllocatableRegisters - 1); |
| ASSERT(last.code() > first.code()); |
| ASSERT((last.code() - first.code()) == |
| (DwVfpRegister::kNumAllocatableRegisters - 1)); |
| #ifdef DEBUG |
| for (int i = 0; i <= (DwVfpRegister::kNumAllocatableRegisters - 1); i++) { |
| ASSERT((DwVfpRegister::FromAllocationIndex(i).code() <= last.code()) && |
| (DwVfpRegister::FromAllocationIndex(i).code() >= first.code())); |
| } |
| #endif |
| __ vstm(db_w, sp, first, last); |
| |
| // Push all 16 registers (needed to populate FrameDescription::registers_). |
| // TODO(1588) Note that using pc with stm is deprecated, so we should perhaps |
| // handle this a bit differently. |
| __ stm(db_w, sp, restored_regs | sp.bit() | lr.bit() | pc.bit()); |
| |
| const int kSavedRegistersAreaSize = |
| (kNumberOfRegisters * kPointerSize) + kDoubleRegsSize; |
| |
| // Get the bailout id from the stack. |
| __ ldr(r2, MemOperand(sp, kSavedRegistersAreaSize)); |
| |
| // Get the address of the location in the code object if possible (r3) (return |
| // address for lazy deoptimization) and compute the fp-to-sp delta in |
| // register r4. |
| if (type() == EAGER) { |
| __ mov(r3, Operand(0)); |
| // Correct one word for bailout id. |
| __ add(r4, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize))); |
| } else if (type() == OSR) { |
| __ mov(r3, lr); |
| // Correct one word for bailout id. |
| __ add(r4, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize))); |
| } else { |
| __ mov(r3, lr); |
| // Correct two words for bailout id and return address. |
| __ add(r4, sp, Operand(kSavedRegistersAreaSize + (2 * kPointerSize))); |
| } |
| __ sub(r4, fp, r4); |
| |
| // Allocate a new deoptimizer object. |
| // Pass four arguments in r0 to r3 and fifth argument on stack. |
| __ PrepareCallCFunction(6, r5); |
| __ ldr(r0, MemOperand(fp, JavaScriptFrameConstants::kFunctionOffset)); |
| __ mov(r1, Operand(type())); // bailout type, |
| // r2: bailout id already loaded. |
| // r3: code address or 0 already loaded. |
| __ str(r4, MemOperand(sp, 0 * kPointerSize)); // Fp-to-sp delta. |
| __ mov(r5, Operand(ExternalReference::isolate_address())); |
| __ str(r5, MemOperand(sp, 1 * kPointerSize)); // Isolate. |
| // Call Deoptimizer::New(). |
| __ CallCFunction(ExternalReference::new_deoptimizer_function(isolate), 6); |
| |
| // Preserve "deoptimizer" object in register r0 and get the input |
| // frame descriptor pointer to r1 (deoptimizer->input_); |
| __ ldr(r1, MemOperand(r0, Deoptimizer::input_offset())); |
| |
| // Copy core registers into FrameDescription::registers_[kNumRegisters]. |
| ASSERT(Register::kNumRegisters == kNumberOfRegisters); |
| for (int i = 0; i < kNumberOfRegisters; i++) { |
| int offset = (i * kPointerSize) + FrameDescription::registers_offset(); |
| __ ldr(r2, MemOperand(sp, i * kPointerSize)); |
| __ str(r2, MemOperand(r1, offset)); |
| } |
| |
| // Copy VFP registers to |
| // double_registers_[DoubleRegister::kNumAllocatableRegisters] |
| int double_regs_offset = FrameDescription::double_registers_offset(); |
| for (int i = 0; i < DwVfpRegister::kNumAllocatableRegisters; ++i) { |
| int dst_offset = i * kDoubleSize + double_regs_offset; |
| int src_offset = i * kDoubleSize + kNumberOfRegisters * kPointerSize; |
| __ vldr(d0, sp, src_offset); |
| __ vstr(d0, r1, dst_offset); |
| } |
| |
| // Remove the bailout id, eventually return address, and the saved registers |
| // from the stack. |
| if (type() == EAGER || type() == OSR) { |
| __ add(sp, sp, Operand(kSavedRegistersAreaSize + (1 * kPointerSize))); |
| } else { |
| __ add(sp, sp, Operand(kSavedRegistersAreaSize + (2 * kPointerSize))); |
| } |
| |
| // Compute a pointer to the unwinding limit in register r2; that is |
| // the first stack slot not part of the input frame. |
| __ ldr(r2, MemOperand(r1, FrameDescription::frame_size_offset())); |
| __ add(r2, r2, sp); |
| |
| // Unwind the stack down to - but not including - the unwinding |
| // limit and copy the contents of the activation frame to the input |
| // frame description. |
| __ add(r3, r1, Operand(FrameDescription::frame_content_offset())); |
| Label pop_loop; |
| __ bind(&pop_loop); |
| __ pop(r4); |
| __ str(r4, MemOperand(r3, 0)); |
| __ add(r3, r3, Operand(sizeof(uint32_t))); |
| __ cmp(r2, sp); |
| __ b(ne, &pop_loop); |
| |
| // Compute the output frame in the deoptimizer. |
| __ push(r0); // Preserve deoptimizer object across call. |
| // r0: deoptimizer object; r1: scratch. |
| __ PrepareCallCFunction(1, r1); |
| // Call Deoptimizer::ComputeOutputFrames(). |
| __ CallCFunction( |
| ExternalReference::compute_output_frames_function(isolate), 1); |
| __ pop(r0); // Restore deoptimizer object (class Deoptimizer). |
| |
| // Replace the current (input) frame with the output frames. |
| Label outer_push_loop, inner_push_loop; |
| // Outer loop state: r0 = current "FrameDescription** output_", |
| // r1 = one past the last FrameDescription**. |
| __ ldr(r1, MemOperand(r0, Deoptimizer::output_count_offset())); |
| __ ldr(r0, MemOperand(r0, Deoptimizer::output_offset())); // r0 is output_. |
| __ add(r1, r0, Operand(r1, LSL, 2)); |
| __ bind(&outer_push_loop); |
| // Inner loop state: r2 = current FrameDescription*, r3 = loop index. |
| __ ldr(r2, MemOperand(r0, 0)); // output_[ix] |
| __ ldr(r3, MemOperand(r2, FrameDescription::frame_size_offset())); |
| __ bind(&inner_push_loop); |
| __ sub(r3, r3, Operand(sizeof(uint32_t))); |
| // __ add(r6, r2, Operand(r3, LSL, 1)); |
| __ add(r6, r2, Operand(r3)); |
| __ ldr(r7, MemOperand(r6, FrameDescription::frame_content_offset())); |
| __ push(r7); |
| __ cmp(r3, Operand(0)); |
| __ b(ne, &inner_push_loop); // test for gt? |
| __ add(r0, r0, Operand(kPointerSize)); |
| __ cmp(r0, r1); |
| __ b(lt, &outer_push_loop); |
| |
| // Push state, pc, and continuation from the last output frame. |
| if (type() != OSR) { |
| __ ldr(r6, MemOperand(r2, FrameDescription::state_offset())); |
| __ push(r6); |
| } |
| |
| __ ldr(r6, MemOperand(r2, FrameDescription::pc_offset())); |
| __ push(r6); |
| __ ldr(r6, MemOperand(r2, FrameDescription::continuation_offset())); |
| __ push(r6); |
| |
| // Push the registers from the last output frame. |
| for (int i = kNumberOfRegisters - 1; i >= 0; i--) { |
| int offset = (i * kPointerSize) + FrameDescription::registers_offset(); |
| __ ldr(r6, MemOperand(r2, offset)); |
| __ push(r6); |
| } |
| |
| // Restore the registers from the stack. |
| __ ldm(ia_w, sp, restored_regs); // all but pc registers. |
| __ pop(ip); // remove sp |
| __ pop(ip); // remove lr |
| |
| __ InitializeRootRegister(); |
| |
| __ pop(ip); // remove pc |
| __ pop(r7); // get continuation, leave pc on stack |
| __ pop(lr); |
| __ Jump(r7); |
| __ stop("Unreachable."); |
| } |
| |
| |
| void Deoptimizer::TableEntryGenerator::GeneratePrologue() { |
| // Create a sequence of deoptimization entries. Note that any |
| // registers may be still live. |
| Label done; |
| for (int i = 0; i < count(); i++) { |
| int start = masm()->pc_offset(); |
| USE(start); |
| if (type() == EAGER) { |
| __ nop(); |
| } else { |
| // Emulate ia32 like call by pushing return address to stack. |
| __ push(lr); |
| } |
| __ mov(ip, Operand(i)); |
| __ push(ip); |
| __ b(&done); |
| ASSERT(masm()->pc_offset() - start == table_entry_size_); |
| } |
| __ bind(&done); |
| } |
| |
| #undef __ |
| |
| } } // namespace v8::internal |