| |
| /*---------------------------------------------------------------*/ |
| /*--- begin libvex_guest_x86.h ---*/ |
| /*---------------------------------------------------------------*/ |
| |
| /* |
| This file is part of Valgrind, a dynamic binary instrumentation |
| framework. |
| |
| Copyright (C) 2004-2012 OpenWorks LLP |
| info@open-works.net |
| |
| This program is free software; you can redistribute it and/or |
| modify it under the terms of the GNU General Public License as |
| published by the Free Software Foundation; either version 2 of the |
| License, or (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| 02110-1301, USA. |
| |
| The GNU General Public License is contained in the file COPYING. |
| |
| Neither the names of the U.S. Department of Energy nor the |
| University of California nor the names of its contributors may be |
| used to endorse or promote products derived from this software |
| without prior written permission. |
| */ |
| |
| #ifndef __LIBVEX_PUB_GUEST_X86_H |
| #define __LIBVEX_PUB_GUEST_X86_H |
| |
| #include "libvex_basictypes.h" |
| #include "libvex_emwarn.h" |
| |
| |
| /*---------------------------------------------------------------*/ |
| /*--- Vex's representation of the x86 CPU state. ---*/ |
| /*---------------------------------------------------------------*/ |
| |
| /* The integer parts should be pretty straightforward. */ |
| |
| /* Hmm, subregisters. The simulated state is stored in memory in the |
| host's byte ordering, so we can't say here what the offsets of %ax, |
| %al, %ah etc are since that depends on the host's byte ordering, |
| which we don't know. */ |
| |
| /* FPU. For now, just simulate 8 64-bit registers, their tags, and |
| the reg-stack top pointer, of which only the least significant |
| three bits are relevant. |
| |
| The model is: |
| F0 .. F7 are the 8 registers. FTOP[2:0] contains the |
| index of the current 'stack top' -- pretty meaningless, but |
| still. FTOP is a 32-bit value. FTOP[31:3] can be anything |
| (not guaranteed to be zero). |
| |
| When a value is pushed onto the stack, ftop is first replaced by |
| (ftop-1) & 7, and then F[ftop] is assigned the value. |
| |
| When a value is popped off the stack, the value is read from |
| F[ftop], and then ftop is replaced by (ftop+1) & 7. |
| |
| In general, a reference to a register ST(i) actually references |
| F[ (ftop+i) & 7 ]. |
| |
| FTAG0 .. FTAG0+7 are the tags. Each is a byte, zero means empty, |
| non-zero means non-empty. |
| |
| The general rule appears to be that a read or modify of a register |
| gets a stack underflow fault if the register is empty. A write of |
| a register (only a write, not a modify) gets a stack overflow fault |
| if the register is full. Note that "over" vs "under" is pretty |
| meaningless since the FP stack pointer can move around arbitrarily, |
| so it's really just two different kinds of exceptions: |
| register-empty and register full. |
| |
| Naturally Intel (in its infinite wisdom) has seen fit to throw in |
| some ad-hoc inconsistencies to the fault-generation rules of the |
| above para, just to complicate everything. Known inconsistencies: |
| |
| * fxam can read a register in any state without taking an underflow |
| fault. |
| |
| * fst from st(0) to st(i) does not take an overflow fault even if the |
| destination is already full. |
| |
| FPROUND[1:0] is the FPU's notional rounding mode, encoded as per |
| the IRRoundingMode type (see libvex_ir.h). This just happens to be |
| the Intel encoding. Note carefully, the rounding mode is only |
| observed on float-to-int conversions, and on float-to-float |
| rounding, but not for general float-to-float operations, which are |
| always rounded-to-nearest. |
| |
| Loads/stores of the FPU control word are faked accordingly -- on |
| loads, everything except the rounding mode is ignored, and on |
| stores, you get a vanilla control world (0x037F) with the rounding |
| mode patched in. Hence the only values you can get are 0x037F, |
| 0x077F, 0x0B7F or 0x0F7F. Vex will emit an emulation warning if |
| you try and load a control word which either (1) unmasks FP |
| exceptions, or (2) changes the default (80-bit) precision. |
| |
| FC3210 contains the C3, C2, C1 and C0 bits in the same place they |
| are in the FPU's status word. (bits 14, 10, 9, 8 respectively). |
| All other bits should be zero. The relevant mask to select just |
| those bits is 0x4700. To select C3, C2 and C0 only, the mask is |
| 0x4500. |
| |
| SSEROUND[1:0] is the SSE unit's notional rounding mode, encoded as |
| per the IRRoundingMode type. As with the FPU control word, the |
| rounding mode is the only part of %MXCSR that Vex observes. On |
| storing %MXCSR, you will get a vanilla word (0x1F80) with the |
| rounding mode patched in. Hence the only values you will get are |
| 0x1F80, 0x3F80, 0x5F80 or 0x7F80. Vex will emit an emulation |
| warning if you try and load a control word which either (1) unmasks |
| any exceptions, (2) sets FZ (flush-to-zero) to 1, or (3) sets DAZ |
| (denormals-are-zeroes) to 1. |
| |
| Segments: initial prefixes of local and global segment descriptor |
| tables are modelled. guest_LDT is either zero (NULL) or points in |
| the host address space to an array of VEX_GUEST_X86_LDT_NENT |
| descriptors, which have the type VexGuestX86SegDescr, defined |
| below. Similarly, guest_GDT is either zero or points in the host |
| address space to an array of VEX_GUEST_X86_GDT_NENT descriptors. |
| The only place where these are used are in the helper function |
| x86g_use_seg(). LibVEX's client is responsible for pointing |
| guest_LDT and guest_GDT at suitable tables. The contents of these |
| tables are expected not to change during the execution of any given |
| superblock, but they may validly be changed by LibVEX's client in |
| between superblock executions. |
| |
| Since x86g_use_seg() only expects these tables to have |
| VEX_GUEST_X86_{LDT,GDT}_NENT entries, LibVEX's client should not |
| attempt to write entries beyond those limits. |
| */ |
| typedef |
| struct { |
| /* Event check fail addr and counter. */ |
| UInt host_EvC_FAILADDR; /* 0 */ |
| UInt host_EvC_COUNTER; /* 4 */ |
| UInt guest_EAX; /* 8 */ |
| UInt guest_ECX; |
| UInt guest_EDX; |
| UInt guest_EBX; |
| UInt guest_ESP; |
| UInt guest_EBP; |
| UInt guest_ESI; |
| UInt guest_EDI; /* 36 */ |
| |
| /* 4-word thunk used to calculate O S Z A C P flags. */ |
| UInt guest_CC_OP; /* 40 */ |
| UInt guest_CC_DEP1; |
| UInt guest_CC_DEP2; |
| UInt guest_CC_NDEP; /* 52 */ |
| /* The D flag is stored here, encoded as either -1 or +1 */ |
| UInt guest_DFLAG; /* 56 */ |
| /* Bit 21 (ID) of eflags stored here, as either 0 or 1. */ |
| UInt guest_IDFLAG; /* 60 */ |
| /* Bit 18 (AC) of eflags stored here, as either 0 or 1. */ |
| UInt guest_ACFLAG; /* 64 */ |
| |
| /* EIP */ |
| UInt guest_EIP; /* 68 */ |
| |
| /* FPU */ |
| ULong guest_FPREG[8]; /* 72 */ |
| UChar guest_FPTAG[8]; /* 136 */ |
| UInt guest_FPROUND; /* 144 */ |
| UInt guest_FC3210; /* 148 */ |
| UInt guest_FTOP; /* 152 */ |
| |
| /* SSE */ |
| UInt guest_SSEROUND; /* 156 */ |
| U128 guest_XMM0; /* 160 */ |
| U128 guest_XMM1; |
| U128 guest_XMM2; |
| U128 guest_XMM3; |
| U128 guest_XMM4; |
| U128 guest_XMM5; |
| U128 guest_XMM6; |
| U128 guest_XMM7; |
| |
| /* Segment registers. */ |
| UShort guest_CS; |
| UShort guest_DS; |
| UShort guest_ES; |
| UShort guest_FS; |
| UShort guest_GS; |
| UShort guest_SS; |
| /* LDT/GDT stuff. */ |
| HWord guest_LDT; /* host addr, a VexGuestX86SegDescr* */ |
| HWord guest_GDT; /* host addr, a VexGuestX86SegDescr* */ |
| |
| /* Emulation warnings */ |
| UInt guest_EMWARN; |
| |
| /* For clflush: record start and length of area to invalidate */ |
| UInt guest_TISTART; |
| UInt guest_TILEN; |
| |
| /* Used to record the unredirected guest address at the start of |
| a translation whose start has been redirected. By reading |
| this pseudo-register shortly afterwards, the translation can |
| find out what the corresponding no-redirection address was. |
| Note, this is only set for wrap-style redirects, not for |
| replace-style ones. */ |
| UInt guest_NRADDR; |
| |
| /* Used for Darwin syscall dispatching. */ |
| UInt guest_SC_CLASS; |
| |
| /* Needed for Darwin (but mandated for all guest architectures): |
| EIP at the last syscall insn (int 0x80/81/82, sysenter, |
| syscall). Used when backing up to restart a syscall that has |
| been interrupted by a signal. */ |
| UInt guest_IP_AT_SYSCALL; |
| |
| /* Padding to make it have an 32-aligned size */ |
| UInt padding[5]; |
| } |
| VexGuestX86State; |
| |
| #define VEX_GUEST_X86_LDT_NENT /*64*/ 8192 /* use complete LDT */ |
| #define VEX_GUEST_X86_GDT_NENT /*16*/ 8192 /* use complete GDT */ |
| |
| |
| /*---------------------------------------------------------------*/ |
| /*--- Types for x86 guest stuff. ---*/ |
| /*---------------------------------------------------------------*/ |
| |
| /* VISIBLE TO LIBRARY CLIENT */ |
| |
| /* This is the hardware-format for a segment descriptor, ie what the |
| x86 actually deals with. It is 8 bytes long. It's ugly. */ |
| |
| typedef struct { |
| union { |
| struct { |
| UShort LimitLow; |
| UShort BaseLow; |
| UInt BaseMid : 8; |
| UInt Type : 5; |
| UInt Dpl : 2; |
| UInt Pres : 1; |
| UInt LimitHi : 4; |
| UInt Sys : 1; |
| UInt Reserved_0 : 1; |
| UInt Default_Big : 1; |
| UInt Granularity : 1; |
| UInt BaseHi : 8; |
| } Bits; |
| struct { |
| UInt word1; |
| UInt word2; |
| } Words; |
| } |
| LdtEnt; |
| } VexGuestX86SegDescr; |
| |
| |
| /*---------------------------------------------------------------*/ |
| /*--- Utility functions for x86 guest stuff. ---*/ |
| /*---------------------------------------------------------------*/ |
| |
| /* ALL THE FOLLOWING ARE VISIBLE TO LIBRARY CLIENT */ |
| |
| /* Initialise all guest x86 state. The FPU is put in default mode. */ |
| extern |
| void LibVEX_GuestX86_initialise ( /*OUT*/VexGuestX86State* vex_state ); |
| |
| |
| /* Extract from the supplied VexGuestX86State structure the |
| corresponding native %eflags value. */ |
| extern |
| UInt LibVEX_GuestX86_get_eflags ( /*IN*/VexGuestX86State* vex_state ); |
| |
| /* Set the carry flag in the given state to 'new_carry_flag', which |
| should be zero or one. */ |
| extern |
| void |
| LibVEX_GuestX86_put_eflag_c ( UInt new_carry_flag, |
| /*MOD*/VexGuestX86State* vex_state ); |
| |
| #endif /* ndef __LIBVEX_PUB_GUEST_X86_H */ |
| |
| /*---------------------------------------------------------------*/ |
| /*--- libvex_guest_x86.h ---*/ |
| /*---------------------------------------------------------------*/ |
