| # Copyright (C) 2005, 2006, 2007 Apple Inc. All rights reserved. |
| # Copyright (C) 2009 Google Inc. All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions |
| # are met: |
| # |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # 3. Neither the name of Apple Computer, Inc. ("Apple") nor the names of |
| # its contributors may be used to endorse or promote products derived |
| # from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY |
| # EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| # DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY |
| # DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| # LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| # ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| # Module to share code to get to WebKit directories. |
| |
| use strict; |
| use warnings; |
| use Config; |
| use FindBin; |
| use File::Basename; |
| use File::Path; |
| use File::Spec; |
| use POSIX; |
| use VCSUtils; |
| |
| BEGIN { |
| use Exporter (); |
| our ($VERSION, @ISA, @EXPORT, @EXPORT_OK, %EXPORT_TAGS); |
| $VERSION = 1.00; |
| @ISA = qw(Exporter); |
| @EXPORT = qw(&chdirWebKit &baseProductDir &productDir &XcodeOptions &XcodeOptionString &XcodeOptionStringNoConfig &passedConfiguration &setConfiguration &safariPath &checkFrameworks ¤tSVNRevision); |
| %EXPORT_TAGS = ( ); |
| @EXPORT_OK = (); |
| } |
| |
| our @EXPORT_OK; |
| |
| my $architecture; |
| my $baseProductDir; |
| my @baseProductDirOption; |
| my $configuration; |
| my $configurationForVisualStudio; |
| my $configurationProductDir; |
| my $sourceDir; |
| my $currentSVNRevision; |
| my $osXVersion; |
| my $isQt; |
| my $isSymbian; |
| my %qtFeatureDefaults; |
| my $isGtk; |
| my $isWx; |
| my $isEfl; |
| my @wxArgs; |
| my $isChromium; |
| my $isInspectorFrontend; |
| |
| # Variables for Win32 support |
| my $vcBuildPath; |
| my $windowsTmpPath; |
| my $windowsSourceDir; |
| my $willUseVCExpressWhenBuilding = 0; |
| |
| # Defined in VCSUtils. |
| sub exitStatus($); |
| |
| sub determineSourceDir |
| { |
| return if $sourceDir; |
| $sourceDir = $FindBin::Bin; |
| $sourceDir =~ s|/+$||; # Remove trailing '/' as we would die later |
| |
| # walks up path checking each directory to see if it is the main WebKit project dir, |
| # defined by containing JavaScriptCore, WebCore, and WebKit |
| until ((-d "$sourceDir/JavaScriptCore" && -d "$sourceDir/WebCore" && -d "$sourceDir/WebKit") || (-d "$sourceDir/Internal" && -d "$sourceDir/OpenSource")) |
| { |
| if ($sourceDir !~ s|/[^/]+$||) { |
| die "Could not find top level webkit directory above source directory using FindBin.\n"; |
| } |
| } |
| |
| $sourceDir = "$sourceDir/OpenSource" if -d "$sourceDir/OpenSource"; |
| } |
| |
| sub currentPerlPath() |
| { |
| my $thisPerl = $^X; |
| if ($^O ne 'VMS') { |
| $thisPerl .= $Config{_exe} unless $thisPerl =~ m/$Config{_exe}$/i; |
| } |
| return $thisPerl; |
| } |
| |
| # used for scripts which are stored in a non-standard location |
| sub setSourceDir($) |
| { |
| ($sourceDir) = @_; |
| } |
| |
| sub determineBaseProductDir |
| { |
| return if defined $baseProductDir; |
| determineSourceDir(); |
| |
| if (isAppleMacWebKit()) { |
| # Silently remove ~/Library/Preferences/xcodebuild.plist which can |
| # cause build failure. The presence of |
| # ~/Library/Preferences/xcodebuild.plist can prevent xcodebuild from |
| # respecting global settings such as a custom build products directory |
| # (<rdar://problem/5585899>). |
| my $personalPlistFile = $ENV{HOME} . "/Library/Preferences/xcodebuild.plist"; |
| if (-e $personalPlistFile) { |
| unlink($personalPlistFile) || die "Could not delete $personalPlistFile: $!"; |
| } |
| |
| open PRODUCT, "defaults read com.apple.Xcode PBXApplicationwideBuildSettings 2> " . File::Spec->devnull() . " |" or die; |
| $baseProductDir = join '', <PRODUCT>; |
| close PRODUCT; |
| |
| $baseProductDir = $1 if $baseProductDir =~ /SYMROOT\s*=\s*\"(.*?)\";/s; |
| undef $baseProductDir unless $baseProductDir =~ /^\//; |
| |
| if (!defined($baseProductDir)) { |
| open PRODUCT, "defaults read com.apple.Xcode PBXProductDirectory 2> " . File::Spec->devnull() . " |" or die; |
| $baseProductDir = <PRODUCT>; |
| close PRODUCT; |
| if ($baseProductDir) { |
| chomp $baseProductDir; |
| undef $baseProductDir unless $baseProductDir =~ /^\//; |
| } |
| } |
| } elsif (isSymbian()) { |
| # Shadow builds are not supported on Symbian |
| $baseProductDir = $sourceDir; |
| } |
| |
| if (!defined($baseProductDir)) { # Port-spesific checks failed, use default |
| $baseProductDir = $ENV{"WEBKITOUTPUTDIR"} || "$sourceDir/WebKitBuild"; |
| } |
| |
| if (isGit() && isGitBranchBuild()) { |
| my $branch = gitBranch(); |
| $baseProductDir = "$baseProductDir/$branch"; |
| } |
| |
| if (isAppleMacWebKit()) { |
| $baseProductDir =~ s|^\Q$(SRCROOT)/..\E$|$sourceDir|; |
| $baseProductDir =~ s|^\Q$(SRCROOT)/../|$sourceDir/|; |
| $baseProductDir =~ s|^~/|$ENV{HOME}/|; |
| die "Can't handle Xcode product directory with a ~ in it.\n" if $baseProductDir =~ /~/; |
| die "Can't handle Xcode product directory with a variable in it.\n" if $baseProductDir =~ /\$/; |
| @baseProductDirOption = ("SYMROOT=$baseProductDir", "OBJROOT=$baseProductDir"); |
| } |
| |
| if (isCygwin()) { |
| my $dosBuildPath = `cygpath --windows \"$baseProductDir\"`; |
| chomp $dosBuildPath; |
| $ENV{"WEBKITOUTPUTDIR"} = $dosBuildPath; |
| } |
| |
| if (isAppleWinWebKit()) { |
| my $unixBuildPath = `cygpath --unix \"$baseProductDir\"`; |
| chomp $unixBuildPath; |
| $baseProductDir = $unixBuildPath; |
| } |
| } |
| |
| sub setBaseProductDir($) |
| { |
| ($baseProductDir) = @_; |
| } |
| |
| sub determineConfiguration |
| { |
| return if defined $configuration; |
| determineBaseProductDir(); |
| if (open CONFIGURATION, "$baseProductDir/Configuration") { |
| $configuration = <CONFIGURATION>; |
| close CONFIGURATION; |
| } |
| if ($configuration) { |
| chomp $configuration; |
| # compatibility for people who have old Configuration files |
| $configuration = "Release" if $configuration eq "Deployment"; |
| $configuration = "Debug" if $configuration eq "Development"; |
| } else { |
| $configuration = "Release"; |
| } |
| } |
| |
| sub determineArchitecture |
| { |
| return if defined $architecture; |
| # make sure $architecture is defined for non-apple-mac builds |
| $architecture = ""; |
| return unless isAppleMacWebKit(); |
| |
| determineBaseProductDir(); |
| if (open ARCHITECTURE, "$baseProductDir/Architecture") { |
| $architecture = <ARCHITECTURE>; |
| close ARCHITECTURE; |
| } |
| if ($architecture) { |
| chomp $architecture; |
| } else { |
| if (isTiger() or isLeopard()) { |
| $architecture = `arch`; |
| } else { |
| my $supports64Bit = `sysctl -n hw.optional.x86_64`; |
| chomp $supports64Bit; |
| $architecture = $supports64Bit ? 'x86_64' : `arch`; |
| } |
| chomp $architecture; |
| } |
| } |
| |
| sub jscPath($) |
| { |
| my ($productDir) = @_; |
| my $jscName = "jsc"; |
| $jscName .= "_debug" if (isCygwin() && ($configuration eq "Debug")); |
| return "$productDir/$jscName"; |
| } |
| |
| sub argumentsForConfiguration() |
| { |
| determineConfiguration(); |
| determineArchitecture(); |
| |
| my @args = (); |
| push(@args, '--debug') if $configuration eq "Debug"; |
| push(@args, '--release') if $configuration eq "Release"; |
| push(@args, '--32-bit') if $architecture ne "x86_64"; |
| push(@args, '--qt') if isQt(); |
| push(@args, '--symbian') if isSymbian(); |
| push(@args, '--gtk') if isGtk(); |
| push(@args, '--efl') if isEfl(); |
| push(@args, '--wx') if isWx(); |
| push(@args, '--chromium') if isChromium(); |
| push(@args, '--inspector-frontend') if isInspectorFrontend(); |
| return @args; |
| } |
| |
| sub determineConfigurationForVisualStudio |
| { |
| return if defined $configurationForVisualStudio; |
| determineConfiguration(); |
| $configurationForVisualStudio = $configuration; |
| return unless $configuration eq "Debug"; |
| setupCygwinEnv(); |
| chomp(my $dir = `cygpath -ua '$ENV{WEBKITLIBRARIESDIR}'`); |
| $configurationForVisualStudio = "Debug_Internal" if -f "$dir/bin/CoreFoundation_debug.dll"; |
| } |
| |
| sub determineConfigurationProductDir |
| { |
| return if defined $configurationProductDir; |
| determineBaseProductDir(); |
| determineConfiguration(); |
| if (isAppleWinWebKit() && !isWx()) { |
| $configurationProductDir = "$baseProductDir/bin"; |
| } else { |
| # [Gtk][Efl] We don't have Release/Debug configurations in straight |
| # autotool builds (non build-webkit). In this case and if |
| # WEBKITOUTPUTDIR exist, use that as our configuration dir. This will |
| # allows us to run run-webkit-tests without using build-webkit. |
| if ($ENV{"WEBKITOUTPUTDIR"} && (isGtk() || isEfl())) { |
| $configurationProductDir = "$baseProductDir"; |
| } else { |
| $configurationProductDir = "$baseProductDir/$configuration"; |
| } |
| } |
| } |
| |
| sub setConfigurationProductDir($) |
| { |
| ($configurationProductDir) = @_; |
| } |
| |
| sub determineCurrentSVNRevision |
| { |
| return if defined $currentSVNRevision; |
| determineSourceDir(); |
| $currentSVNRevision = svnRevisionForDirectory($sourceDir); |
| return $currentSVNRevision; |
| } |
| |
| |
| sub chdirWebKit |
| { |
| determineSourceDir(); |
| chdir $sourceDir or die; |
| } |
| |
| sub baseProductDir |
| { |
| determineBaseProductDir(); |
| return $baseProductDir; |
| } |
| |
| sub sourceDir |
| { |
| determineSourceDir(); |
| return $sourceDir; |
| } |
| |
| sub productDir |
| { |
| determineConfigurationProductDir(); |
| return $configurationProductDir; |
| } |
| |
| sub jscProductDir |
| { |
| my $productDir = productDir(); |
| $productDir .= "/JavaScriptCore" if isQt(); |
| $productDir .= "/$configuration" if (isQt() && isWindows()); |
| $productDir .= "/Programs" if (isGtk() || isEfl()); |
| |
| return $productDir; |
| } |
| |
| sub configuration() |
| { |
| determineConfiguration(); |
| return $configuration; |
| } |
| |
| sub configurationForVisualStudio() |
| { |
| determineConfigurationForVisualStudio(); |
| return $configurationForVisualStudio; |
| } |
| |
| sub currentSVNRevision |
| { |
| determineCurrentSVNRevision(); |
| return $currentSVNRevision; |
| } |
| |
| sub XcodeOptions |
| { |
| determineBaseProductDir(); |
| determineConfiguration(); |
| determineArchitecture(); |
| return (@baseProductDirOption, "-configuration", $configuration, "ARCHS=$architecture"); |
| } |
| |
| sub XcodeOptionString |
| { |
| return join " ", XcodeOptions(); |
| } |
| |
| sub XcodeOptionStringNoConfig |
| { |
| return join " ", @baseProductDirOption; |
| } |
| |
| sub XcodeCoverageSupportOptions() |
| { |
| my @coverageSupportOptions = (); |
| push @coverageSupportOptions, "GCC_GENERATE_TEST_COVERAGE_FILES=YES"; |
| push @coverageSupportOptions, "GCC_INSTRUMENT_PROGRAM_FLOW_ARCS=YES"; |
| push @coverageSupportOptions, "EXTRA_LINK= \$(EXTRA_LINK) -ftest-coverage -fprofile-arcs"; |
| push @coverageSupportOptions, "OTHER_CFLAGS= \$(OTHER_CFLAGS) -DCOVERAGE -MD"; |
| push @coverageSupportOptions, "OTHER_LDFLAGS=\$(OTHER_LDFLAGS) -ftest-coverage -fprofile-arcs -framework AppKit"; |
| return @coverageSupportOptions; |
| } |
| |
| my $passedConfiguration; |
| my $searchedForPassedConfiguration; |
| sub determinePassedConfiguration |
| { |
| return if $searchedForPassedConfiguration; |
| $searchedForPassedConfiguration = 1; |
| |
| my $isWinCairo = checkForArgumentAndRemoveFromARGV("--cairo-win32"); |
| |
| for my $i (0 .. $#ARGV) { |
| my $opt = $ARGV[$i]; |
| if ($opt =~ /^--debug$/i || $opt =~ /^--devel/i) { |
| splice(@ARGV, $i, 1); |
| $passedConfiguration = "Debug"; |
| $passedConfiguration .= "_Cairo" if ($isWinCairo && isCygwin()); |
| return; |
| } |
| if ($opt =~ /^--release$/i || $opt =~ /^--deploy/i) { |
| splice(@ARGV, $i, 1); |
| $passedConfiguration = "Release"; |
| $passedConfiguration .= "_Cairo" if ($isWinCairo && isCygwin()); |
| return; |
| } |
| if ($opt =~ /^--profil(e|ing)$/i) { |
| splice(@ARGV, $i, 1); |
| $passedConfiguration = "Profiling"; |
| $passedConfiguration .= "_Cairo" if ($isWinCairo && isCygwin()); |
| return; |
| } |
| } |
| $passedConfiguration = undef; |
| } |
| |
| sub passedConfiguration |
| { |
| determinePassedConfiguration(); |
| return $passedConfiguration; |
| } |
| |
| sub setConfiguration |
| { |
| setArchitecture(); |
| |
| if (my $config = shift @_) { |
| $configuration = $config; |
| return; |
| } |
| |
| determinePassedConfiguration(); |
| $configuration = $passedConfiguration if $passedConfiguration; |
| } |
| |
| |
| my $passedArchitecture; |
| my $searchedForPassedArchitecture; |
| sub determinePassedArchitecture |
| { |
| return if $searchedForPassedArchitecture; |
| $searchedForPassedArchitecture = 1; |
| |
| for my $i (0 .. $#ARGV) { |
| my $opt = $ARGV[$i]; |
| if ($opt =~ /^--32-bit$/i) { |
| splice(@ARGV, $i, 1); |
| if (isAppleMacWebKit()) { |
| $passedArchitecture = `arch`; |
| chomp $passedArchitecture; |
| } |
| return; |
| } |
| } |
| $passedArchitecture = undef; |
| } |
| |
| sub passedArchitecture |
| { |
| determinePassedArchitecture(); |
| return $passedArchitecture; |
| } |
| |
| sub architecture() |
| { |
| determineArchitecture(); |
| return $architecture; |
| } |
| |
| sub setArchitecture |
| { |
| if (my $arch = shift @_) { |
| $architecture = $arch; |
| return; |
| } |
| |
| determinePassedArchitecture(); |
| $architecture = $passedArchitecture if $passedArchitecture; |
| } |
| |
| |
| sub safariPathFromSafariBundle |
| { |
| my ($safariBundle) = @_; |
| |
| return "$safariBundle/Contents/MacOS/Safari" if isAppleMacWebKit(); |
| return $safariBundle if isAppleWinWebKit(); |
| } |
| |
| sub installedSafariPath |
| { |
| my $safariBundle; |
| |
| if (isAppleMacWebKit()) { |
| $safariBundle = "/Applications/Safari.app"; |
| } elsif (isAppleWinWebKit()) { |
| $safariBundle = `"$configurationProductDir/FindSafari.exe"`; |
| $safariBundle =~ s/[\r\n]+$//; |
| $safariBundle = `cygpath -u '$safariBundle'`; |
| $safariBundle =~ s/[\r\n]+$//; |
| $safariBundle .= "Safari.exe"; |
| } |
| |
| return safariPathFromSafariBundle($safariBundle); |
| } |
| |
| # Locate Safari. |
| sub safariPath |
| { |
| # Use WEBKIT_SAFARI environment variable if present. |
| my $safariBundle = $ENV{WEBKIT_SAFARI}; |
| if (!$safariBundle) { |
| determineConfigurationProductDir(); |
| # Use Safari.app in product directory if present (good for Safari development team). |
| if (isAppleMacWebKit() && -d "$configurationProductDir/Safari.app") { |
| $safariBundle = "$configurationProductDir/Safari.app"; |
| } elsif (isAppleWinWebKit()) { |
| my $path = "$configurationProductDir/Safari.exe"; |
| my $debugPath = "$configurationProductDir/Safari_debug.exe"; |
| |
| if (configurationForVisualStudio() =~ /Debug/ && -x $debugPath) { |
| $safariBundle = $debugPath; |
| } elsif (-x $path) { |
| $safariBundle = $path; |
| } |
| } |
| if (!$safariBundle) { |
| return installedSafariPath(); |
| } |
| } |
| my $safariPath = safariPathFromSafariBundle($safariBundle); |
| die "Can't find executable at $safariPath.\n" if isAppleMacWebKit() && !-x $safariPath; |
| return $safariPath; |
| } |
| |
| sub builtDylibPathForName |
| { |
| my $libraryName = shift; |
| determineConfigurationProductDir(); |
| if (isChromium()) { |
| return "$configurationProductDir/$libraryName"; |
| } |
| if (isQt()) { |
| $libraryName = "QtWebKit"; |
| if (isDarwin() and -d "$configurationProductDir/lib/$libraryName.framework") { |
| return "$configurationProductDir/lib/$libraryName.framework/$libraryName"; |
| } elsif (isWindows()) { |
| if (configuration() eq "Debug") { |
| # On Windows, there is a "d" suffix to the library name. See <http://trac.webkit.org/changeset/53924/>. |
| $libraryName .= "d"; |
| } |
| |
| my $mkspec = `qmake -query QMAKE_MKSPECS`; |
| $mkspec =~ s/[\n|\r]$//g; |
| my $qtMajorVersion = retrieveQMakespecVar("$mkspec/qconfig.pri", "QT_MAJOR_VERSION"); |
| if (not $qtMajorVersion) { |
| $qtMajorVersion = ""; |
| } |
| return "$configurationProductDir/lib/$libraryName$qtMajorVersion.dll"; |
| } else { |
| return "$configurationProductDir/lib/lib$libraryName.so"; |
| } |
| } |
| if (isWx()) { |
| return "$configurationProductDir/libwxwebkit.dylib"; |
| } |
| if (isGtk()) { |
| return "$configurationProductDir/$libraryName/../.libs/libwebkit-1.0.so"; |
| } |
| if (isEfl()) { |
| return "$configurationProductDir/$libraryName/../.libs/libewebkit.so"; |
| } |
| if (isAppleMacWebKit()) { |
| return "$configurationProductDir/$libraryName.framework/Versions/A/$libraryName"; |
| } |
| if (isAppleWinWebKit()) { |
| if ($libraryName eq "JavaScriptCore") { |
| return "$baseProductDir/lib/$libraryName.lib"; |
| } else { |
| return "$baseProductDir/$libraryName.intermediate/$configuration/$libraryName.intermediate/$libraryName.lib"; |
| } |
| } |
| |
| die "Unsupported platform, can't determine built library locations.\nTry `build-webkit --help` for more information.\n"; |
| } |
| |
| # Check to see that all the frameworks are built. |
| sub checkFrameworks # FIXME: This is a poor name since only the Mac calls built WebCore a Framework. |
| { |
| return if isCygwin(); |
| my @frameworks = ("JavaScriptCore", "WebCore"); |
| push(@frameworks, "WebKit") if isAppleMacWebKit(); # FIXME: This seems wrong, all ports should have a WebKit these days. |
| for my $framework (@frameworks) { |
| my $path = builtDylibPathForName($framework); |
| die "Can't find built framework at \"$path\".\n" unless -e $path; |
| } |
| } |
| |
| sub isInspectorFrontend() |
| { |
| determineIsInspectorFrontend(); |
| return $isInspectorFrontend; |
| } |
| |
| sub determineIsInspectorFrontend() |
| { |
| return if defined($isInspectorFrontend); |
| $isInspectorFrontend = checkForArgumentAndRemoveFromARGV("--inspector-frontend"); |
| } |
| |
| sub isQt() |
| { |
| determineIsQt(); |
| return $isQt; |
| } |
| |
| sub isSymbian() |
| { |
| determineIsSymbian(); |
| return $isSymbian; |
| } |
| |
| sub qtFeatureDefaults() |
| { |
| determineQtFeatureDefaults(); |
| return %qtFeatureDefaults; |
| } |
| |
| sub commandExists($) |
| { |
| my $command = shift; |
| my $devnull = File::Spec->devnull(); |
| return `$command --version 2> $devnull`; |
| } |
| |
| sub determineQtFeatureDefaults() |
| { |
| return if %qtFeatureDefaults; |
| die "ERROR: qmake missing but required to build WebKit.\n" if not commandExists("qmake"); |
| my $originalCwd = getcwd(); |
| chdir File::Spec->catfile(sourceDir(), "WebCore"); |
| my $defaults = `qmake CONFIG+=compute_defaults 2>&1`; |
| chdir $originalCwd; |
| |
| while ($defaults =~ m/(\S*?)=(.*?)( |$)/gi) { |
| $qtFeatureDefaults{$1}=$2; |
| } |
| } |
| |
| sub checkForArgumentAndRemoveFromARGV |
| { |
| my $argToCheck = shift; |
| foreach my $opt (@ARGV) { |
| if ($opt =~ /^$argToCheck$/i ) { |
| @ARGV = grep(!/^$argToCheck$/i, @ARGV); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| sub determineIsQt() |
| { |
| return if defined($isQt); |
| |
| # Allow override in case QTDIR is not set. |
| if (checkForArgumentAndRemoveFromARGV("--qt")) { |
| $isQt = 1; |
| return; |
| } |
| |
| # The presence of QTDIR only means Qt if --gtk or --wx or --efl are not on the command-line |
| if (isGtk() || isWx() || isEfl()) { |
| $isQt = 0; |
| return; |
| } |
| |
| $isQt = defined($ENV{'QTDIR'}); |
| } |
| |
| sub determineIsSymbian() |
| { |
| return if defined($isSymbian); |
| |
| if (checkForArgumentAndRemoveFromARGV("--symbian")) { |
| $isSymbian = 1; |
| return; |
| } |
| |
| $isSymbian = defined($ENV{'EPOCROOT'}); |
| } |
| |
| sub determineIsEfl() |
| { |
| return if defined($isEfl); |
| $isEfl = checkForArgumentAndRemoveFromARGV("--efl"); |
| } |
| |
| sub isEfl() |
| { |
| determineIsEfl(); |
| return $isEfl; |
| } |
| |
| sub isGtk() |
| { |
| determineIsGtk(); |
| return $isGtk; |
| } |
| |
| sub determineIsGtk() |
| { |
| return if defined($isGtk); |
| $isGtk = checkForArgumentAndRemoveFromARGV("--gtk"); |
| } |
| |
| sub isWx() |
| { |
| determineIsWx(); |
| return $isWx; |
| } |
| |
| sub determineIsWx() |
| { |
| return if defined($isWx); |
| $isWx = checkForArgumentAndRemoveFromARGV("--wx"); |
| } |
| |
| sub getWxArgs() |
| { |
| if (!@wxArgs) { |
| @wxArgs = (""); |
| my $rawWxArgs = ""; |
| foreach my $opt (@ARGV) { |
| if ($opt =~ /^--wx-args/i ) { |
| @ARGV = grep(!/^--wx-args/i, @ARGV); |
| $rawWxArgs = $opt; |
| $rawWxArgs =~ s/--wx-args=//i; |
| } |
| } |
| @wxArgs = split(/,/, $rawWxArgs); |
| } |
| return @wxArgs; |
| } |
| |
| # Determine if this is debian, ubuntu, linspire, or something similar. |
| sub isDebianBased() |
| { |
| return -e "/etc/debian_version"; |
| } |
| |
| sub isFedoraBased() |
| { |
| return -e "/etc/fedora-release"; |
| } |
| |
| sub isChromium() |
| { |
| determineIsChromium(); |
| return $isChromium; |
| } |
| |
| sub determineIsChromium() |
| { |
| return if defined($isChromium); |
| $isChromium = checkForArgumentAndRemoveFromARGV("--chromium"); |
| } |
| |
| sub isCygwin() |
| { |
| return ($^O eq "cygwin") || 0; |
| } |
| |
| sub isDarwin() |
| { |
| return ($^O eq "darwin") || 0; |
| } |
| |
| sub isWindows() |
| { |
| return ($^O eq "MSWin32") || 0; |
| } |
| |
| sub isMsys() |
| { |
| return ($^O eq "msys") || 0; |
| } |
| |
| sub isLinux() |
| { |
| return ($^O eq "linux") || 0; |
| } |
| |
| sub isAppleWebKit() |
| { |
| return !(isQt() or isGtk() or isWx() or isChromium() or isEfl()); |
| } |
| |
| sub isAppleMacWebKit() |
| { |
| return isAppleWebKit() && isDarwin(); |
| } |
| |
| sub isAppleWinWebKit() |
| { |
| return isAppleWebKit() && isCygwin(); |
| } |
| |
| sub isPerianInstalled() |
| { |
| if (!isAppleWebKit()) { |
| return 0; |
| } |
| |
| if (-d "/Library/QuickTime/Perian.component") { |
| return 1; |
| } |
| |
| if (-d "$ENV{HOME}/Library/QuickTime/Perian.component") { |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| sub determineOSXVersion() |
| { |
| return if $osXVersion; |
| |
| if (!isDarwin()) { |
| $osXVersion = -1; |
| return; |
| } |
| |
| my $version = `sw_vers -productVersion`; |
| my @splitVersion = split(/\./, $version); |
| @splitVersion >= 2 or die "Invalid version $version"; |
| $osXVersion = { |
| "major" => $splitVersion[0], |
| "minor" => $splitVersion[1], |
| "subminor" => (defined($splitVersion[2]) ? $splitVersion[2] : 0), |
| }; |
| } |
| |
| sub osXVersion() |
| { |
| determineOSXVersion(); |
| return $osXVersion; |
| } |
| |
| sub isTiger() |
| { |
| return isDarwin() && osXVersion()->{"minor"} == 4; |
| } |
| |
| sub isLeopard() |
| { |
| return isDarwin() && osXVersion()->{"minor"} == 5; |
| } |
| |
| sub isSnowLeopard() |
| { |
| return isDarwin() && osXVersion()->{"minor"} == 6; |
| } |
| |
| sub isWindowsNT() |
| { |
| return $ENV{'OS'} eq 'Windows_NT'; |
| } |
| |
| sub relativeScriptsDir() |
| { |
| my $scriptDir = File::Spec->catpath("", File::Spec->abs2rel(dirname($0), getcwd()), ""); |
| if ($scriptDir eq "") { |
| $scriptDir = "."; |
| } |
| return $scriptDir; |
| } |
| |
| sub launcherPath() |
| { |
| my $relativeScriptsPath = relativeScriptsDir(); |
| if (isGtk() || isQt() || isWx() || isEfl()) { |
| return "$relativeScriptsPath/run-launcher"; |
| } elsif (isAppleWebKit()) { |
| return "$relativeScriptsPath/run-safari"; |
| } |
| } |
| |
| sub launcherName() |
| { |
| if (isGtk()) { |
| return "GtkLauncher"; |
| } elsif (isQt()) { |
| return "QtLauncher"; |
| } elsif (isWx()) { |
| return "wxBrowser"; |
| } elsif (isAppleWebKit()) { |
| return "Safari"; |
| } elsif (isEfl()) { |
| return "EWebLauncher"; |
| } |
| } |
| |
| sub checkRequiredSystemConfig |
| { |
| if (isDarwin()) { |
| chomp(my $productVersion = `sw_vers -productVersion`); |
| if ($productVersion lt "10.4") { |
| print "*************************************************************\n"; |
| print "Mac OS X Version 10.4.0 or later is required to build WebKit.\n"; |
| print "You have " . $productVersion . ", thus the build will most likely fail.\n"; |
| print "*************************************************************\n"; |
| } |
| my $xcodeVersion = `xcodebuild -version`; |
| if ($xcodeVersion !~ /DevToolsCore-(\d+)/ || $1 < 747) { |
| print "*************************************************************\n"; |
| print "Xcode Version 2.3 or later is required to build WebKit.\n"; |
| print "You have an earlier version of Xcode, thus the build will\n"; |
| print "most likely fail. The latest Xcode is available from the web:\n"; |
| print "http://developer.apple.com/tools/xcode\n"; |
| print "*************************************************************\n"; |
| } |
| } elsif (isGtk() or isQt() or isWx() or isEfl()) { |
| my @cmds = qw(flex bison gperf); |
| my @missing = (); |
| foreach my $cmd (@cmds) { |
| push @missing, $cmd if not commandExists($cmd); |
| } |
| |
| if (@missing) { |
| my $list = join ", ", @missing; |
| die "ERROR: $list missing but required to build WebKit.\n"; |
| } |
| } |
| # Win32 and other platforms may want to check for minimum config |
| } |
| |
| sub determineWindowsSourceDir() |
| { |
| return if $windowsSourceDir; |
| my $sourceDir = sourceDir(); |
| chomp($windowsSourceDir = `cygpath -w '$sourceDir'`); |
| } |
| |
| sub windowsSourceDir() |
| { |
| determineWindowsSourceDir(); |
| return $windowsSourceDir; |
| } |
| |
| sub windowsLibrariesDir() |
| { |
| return windowsSourceDir() . "\\WebKitLibraries\\win"; |
| } |
| |
| sub windowsOutputDir() |
| { |
| return windowsSourceDir() . "\\WebKitBuild"; |
| } |
| |
| sub setupAppleWinEnv() |
| { |
| return unless isAppleWinWebKit(); |
| |
| if (isWindowsNT()) { |
| my $restartNeeded = 0; |
| my %variablesToSet = (); |
| |
| # Setting the environment variable 'CYGWIN' to 'tty' makes cygwin enable extra support (i.e., termios) |
| # for UNIX-like ttys in the Windows console |
| $variablesToSet{CYGWIN} = "tty" unless $ENV{CYGWIN}; |
| |
| # Those environment variables must be set to be able to build inside Visual Studio. |
| $variablesToSet{WEBKITLIBRARIESDIR} = windowsLibrariesDir() unless $ENV{WEBKITLIBRARIESDIR}; |
| $variablesToSet{WEBKITOUTPUTDIR} = windowsOutputDir() unless $ENV{WEBKITOUTPUTDIR}; |
| |
| foreach my $variable (keys %variablesToSet) { |
| print "Setting the Environment Variable '" . $variable . "' to '" . $variablesToSet{$variable} . "'\n\n"; |
| system qw(regtool -s set), '\\HKEY_CURRENT_USER\\Environment\\' . $variable, $variablesToSet{$variable}; |
| $restartNeeded ||= $variable eq "WEBKITLIBRARIESDIR" || $variable eq "WEBKITOUTPUTDIR"; |
| } |
| |
| if ($restartNeeded) { |
| print "Please restart your computer before attempting to build inside Visual Studio.\n\n"; |
| } |
| } else { |
| if (!$ENV{'WEBKITLIBRARIESDIR'}) { |
| print "Warning: You must set the 'WebKitLibrariesDir' environment variable\n"; |
| print " to be able build WebKit from within Visual Studio.\n"; |
| print " Make sure that 'WebKitLibrariesDir' points to the\n"; |
| print " 'WebKitLibraries/win' directory, not the 'WebKitLibraries/' directory.\n\n"; |
| } |
| if (!$ENV{'WEBKITOUTPUTDIR'}) { |
| print "Warning: You must set the 'WebKitOutputDir' environment variable\n"; |
| print " to be able build WebKit from within Visual Studio.\n\n"; |
| } |
| } |
| } |
| |
| sub setupCygwinEnv() |
| { |
| return if !isCygwin(); |
| return if $vcBuildPath; |
| |
| my $vsInstallDir; |
| my $programFilesPath = $ENV{'PROGRAMFILES'} || "C:\\Program Files"; |
| if ($ENV{'VSINSTALLDIR'}) { |
| $vsInstallDir = $ENV{'VSINSTALLDIR'}; |
| } else { |
| $vsInstallDir = "$programFilesPath/Microsoft Visual Studio 8"; |
| } |
| $vsInstallDir = `cygpath "$vsInstallDir"`; |
| chomp $vsInstallDir; |
| $vcBuildPath = "$vsInstallDir/Common7/IDE/devenv.com"; |
| if (-e $vcBuildPath) { |
| # Visual Studio is installed; we can use pdevenv to build. |
| $vcBuildPath = File::Spec->catfile(sourceDir(), qw(WebKitTools Scripts pdevenv)); |
| } else { |
| # Visual Studio not found, try VC++ Express |
| $vcBuildPath = "$vsInstallDir/Common7/IDE/VCExpress.exe"; |
| if (! -e $vcBuildPath) { |
| print "*************************************************************\n"; |
| print "Cannot find '$vcBuildPath'\n"; |
| print "Please execute the file 'vcvars32.bat' from\n"; |
| print "'$programFilesPath\\Microsoft Visual Studio 8\\VC\\bin\\'\n"; |
| print "to setup the necessary environment variables.\n"; |
| print "*************************************************************\n"; |
| die; |
| } |
| $willUseVCExpressWhenBuilding = 1; |
| } |
| |
| my $qtSDKPath = "$programFilesPath/QuickTime SDK"; |
| if (0 && ! -e $qtSDKPath) { |
| print "*************************************************************\n"; |
| print "Cannot find '$qtSDKPath'\n"; |
| print "Please download the QuickTime SDK for Windows from\n"; |
| print "http://developer.apple.com/quicktime/download/\n"; |
| print "*************************************************************\n"; |
| die; |
| } |
| |
| chomp($ENV{'WEBKITLIBRARIESDIR'} = `cygpath -wa "$sourceDir/WebKitLibraries/win"`) unless $ENV{'WEBKITLIBRARIESDIR'}; |
| |
| $windowsTmpPath = `cygpath -w /tmp`; |
| chomp $windowsTmpPath; |
| print "Building results into: ", baseProductDir(), "\n"; |
| print "WEBKITOUTPUTDIR is set to: ", $ENV{"WEBKITOUTPUTDIR"}, "\n"; |
| print "WEBKITLIBRARIESDIR is set to: ", $ENV{"WEBKITLIBRARIESDIR"}, "\n"; |
| } |
| |
| sub dieIfWindowsPlatformSDKNotInstalled |
| { |
| my $windowsPlatformSDKRegistryEntry = "/proc/registry/HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/MicrosoftSDK/InstalledSDKs/D2FF9F89-8AA2-4373-8A31-C838BF4DBBE1"; |
| |
| return if -e $windowsPlatformSDKRegistryEntry; |
| |
| print "*************************************************************\n"; |
| print "Cannot find '$windowsPlatformSDKRegistryEntry'.\n"; |
| print "Please download and install the Microsoft Windows Server 2003 R2\n"; |
| print "Platform SDK from <http://www.microsoft.com/downloads/details.aspx?\n"; |
| print "familyid=0baf2b35-c656-4969-ace8-e4c0c0716adb&displaylang=en>.\n\n"; |
| print "Then follow step 2 in the Windows section of the \"Installing Developer\n"; |
| print "Tools\" instructions at <http://www.webkit.org/building/tools.html>.\n"; |
| print "*************************************************************\n"; |
| die; |
| } |
| |
| sub copyInspectorFrontendFiles |
| { |
| my $productDir = productDir(); |
| my $sourceInspectorPath = sourceDir() . "/WebCore/inspector/front-end/"; |
| my $inspectorResourcesDirPath = $ENV{"WEBKITINSPECTORRESOURCESDIR"}; |
| |
| if (!defined($inspectorResourcesDirPath)) { |
| $inspectorResourcesDirPath = ""; |
| } |
| |
| if (isAppleMacWebKit()) { |
| $inspectorResourcesDirPath = $productDir . "/WebCore.framework/Resources/inspector"; |
| } elsif (isAppleWinWebKit()) { |
| $inspectorResourcesDirPath = $productDir . "/WebKit.resources/inspector"; |
| } elsif (isQt() || isGtk()) { |
| my $prefix = $ENV{"WebKitInstallationPrefix"}; |
| $inspectorResourcesDirPath = (defined($prefix) ? $prefix : "/usr/share") . "/webkit-1.0/webinspector"; |
| } elsif (isEfl()) { |
| my $prefix = $ENV{"WebKitInstallationPrefix"}; |
| $inspectorResourcesDirPath = (defined($prefix) ? $prefix : "/usr/share") . "/ewebkit/webinspector"; |
| } |
| |
| if (! -d $inspectorResourcesDirPath) { |
| print "*************************************************************\n"; |
| print "Cannot find '$inspectorResourcesDirPath'.\n" if (defined($inspectorResourcesDirPath)); |
| print "Make sure that you have built WebKit first.\n" if (! -d $productDir || defined($inspectorResourcesDirPath)); |
| print "Optionally, set the environment variable 'WebKitInspectorResourcesDir'\n"; |
| print "to point to the directory that contains the WebKit Inspector front-end\n"; |
| print "files for the built WebCore framework.\n"; |
| print "*************************************************************\n"; |
| die; |
| } |
| return system "rsync", "-aut", "--exclude=/.DS_Store", "--exclude=.svn/", !isQt() ? "--exclude=/WebKit.qrc" : "", $sourceInspectorPath, $inspectorResourcesDirPath; |
| } |
| |
| sub buildXCodeProject($$@) |
| { |
| my ($project, $clean, @extraOptions) = @_; |
| |
| if ($clean) { |
| push(@extraOptions, "-alltargets"); |
| push(@extraOptions, "clean"); |
| } |
| |
| return system "xcodebuild", "-project", "$project.xcodeproj", @extraOptions; |
| } |
| |
| sub buildVisualStudioProject |
| { |
| my ($project, $clean) = @_; |
| setupCygwinEnv(); |
| |
| my $config = configurationForVisualStudio(); |
| |
| dieIfWindowsPlatformSDKNotInstalled() if $willUseVCExpressWhenBuilding; |
| |
| chomp(my $winProjectPath = `cygpath -w "$project"`); |
| |
| my $action = "/build"; |
| if ($clean) { |
| $action = "/clean"; |
| } |
| |
| my @command = ($vcBuildPath, $winProjectPath, $action, $config); |
| |
| print join(" ", @command), "\n"; |
| return system @command; |
| } |
| |
| sub downloadWafIfNeeded |
| { |
| # get / update waf if needed |
| my $waf = "$sourceDir/WebKitTools/wx/waf"; |
| my $wafURL = 'http://wxwebkit.wxcommunity.com/downloads/deps/waf'; |
| if (!-f $waf) { |
| my $result = system "curl -o $waf $wafURL"; |
| chmod 0755, $waf; |
| } |
| } |
| |
| sub buildWafProject |
| { |
| my ($project, $shouldClean, @options) = @_; |
| |
| # set the PYTHONPATH for waf |
| my $pythonPath = $ENV{'PYTHONPATH'}; |
| if (!defined($pythonPath)) { |
| $pythonPath = ''; |
| } |
| my $sourceDir = sourceDir(); |
| my $newPythonPath = "$sourceDir/WebKitTools/wx/build:$pythonPath"; |
| if (isCygwin()) { |
| $newPythonPath = `cygpath --mixed --path $newPythonPath`; |
| } |
| $ENV{'PYTHONPATH'} = $newPythonPath; |
| |
| print "Building $project\n"; |
| |
| my $wafCommand = "$sourceDir/WebKitTools/wx/waf"; |
| if ($ENV{'WXWEBKIT_WAF'}) { |
| $wafCommand = $ENV{'WXWEBKIT_WAF'}; |
| } |
| if (isCygwin()) { |
| $wafCommand = `cygpath --windows "$wafCommand"`; |
| chomp($wafCommand); |
| } |
| if ($shouldClean) { |
| return system $wafCommand, "clean", "distclean"; |
| } |
| |
| return system $wafCommand, 'configure', 'build', 'install', @options; |
| } |
| |
| sub retrieveQMakespecVar |
| { |
| my $mkspec = $_[0]; |
| my $varname = $_[1]; |
| |
| my $varvalue = undef; |
| #print "retrieveMakespecVar " . $mkspec . ", " . $varname . "\n"; |
| |
| local *SPEC; |
| open SPEC, "<$mkspec" or return $varvalue; |
| while (<SPEC>) { |
| if ($_ =~ /\s*include\((.+)\)/) { |
| # open the included mkspec |
| my $oldcwd = getcwd(); |
| (my $volume, my $directories, my $file) = File::Spec->splitpath($mkspec); |
| my $newcwd = "$volume$directories"; |
| chdir $newcwd if $newcwd; |
| $varvalue = retrieveQMakespecVar($1, $varname); |
| chdir $oldcwd; |
| } elsif ($_ =~ /$varname\s*=\s*([^\s]+)/) { |
| $varvalue = $1; |
| last; |
| } |
| } |
| close SPEC; |
| return $varvalue; |
| } |
| |
| sub qtMakeCommand($) |
| { |
| my ($qmakebin) = @_; |
| chomp(my $mkspec = `$qmakebin -query QMAKE_MKSPECS`); |
| $mkspec .= "/default"; |
| my $compiler = retrieveQMakespecVar("$mkspec/qmake.conf", "QMAKE_CC"); |
| |
| #print "default spec: " . $mkspec . "\n"; |
| #print "compiler found: " . $compiler . "\n"; |
| |
| if ($compiler && $compiler eq "cl") { |
| return "nmake"; |
| } |
| |
| return "make"; |
| } |
| |
| sub autotoolsFlag($$) |
| { |
| my ($flag, $feature) = @_; |
| my $prefix = $flag ? "--enable" : "--disable"; |
| |
| return $prefix . '-' . $feature; |
| } |
| |
| sub buildAutotoolsProject($@) |
| { |
| my ($clean, @buildParams) = @_; |
| |
| my $make = 'make'; |
| my $dir = productDir(); |
| my $config = passedConfiguration() || configuration(); |
| my $prefix = $ENV{"WebKitInstallationPrefix"}; |
| |
| my @buildArgs = (); |
| my $makeArgs = $ENV{"WebKitMakeArguments"} || ""; |
| for my $i (0 .. $#buildParams) { |
| my $opt = $buildParams[$i]; |
| if ($opt =~ /^--makeargs=(.*)/i ) { |
| $makeArgs = $makeArgs . " " . $1; |
| } else { |
| push @buildArgs, $opt; |
| } |
| } |
| |
| push @buildArgs, "--prefix=" . $prefix if defined($prefix); |
| |
| # check if configuration is Debug |
| if ($config =~ m/debug/i) { |
| push @buildArgs, "--enable-debug"; |
| } else { |
| push @buildArgs, "--disable-debug"; |
| } |
| |
| # Use rm to clean the build directory since distclean may miss files |
| if ($clean && -d $dir) { |
| system "rm", "-rf", "$dir"; |
| } |
| |
| if (! -d $dir) { |
| system "mkdir", "-p", "$dir"; |
| if (! -d $dir) { |
| die "Failed to create build directory " . $dir; |
| } |
| } |
| |
| chdir $dir or die "Failed to cd into " . $dir . "\n"; |
| |
| my $result; |
| if ($clean) { |
| #$result = system $make, "distclean"; |
| return 0; |
| } |
| |
| print "Calling configure in " . $dir . "\n\n"; |
| print "Installation directory: $prefix\n" if(defined($prefix)); |
| |
| # Make the path relative since it will appear in all -I compiler flags. |
| # Long argument lists cause bizarre slowdowns in libtool. |
| my $relSourceDir = File::Spec->abs2rel($sourceDir); |
| $relSourceDir = "." if !$relSourceDir; |
| |
| $result = system "$relSourceDir/autogen.sh", @buildArgs; |
| if ($result ne 0) { |
| die "Failed to setup build environment using 'autotools'!\n"; |
| } |
| |
| $result = system "$make $makeArgs"; |
| if ($result ne 0) { |
| die "\nFailed to build WebKit using '$make'!\n"; |
| } |
| |
| chdir ".." or die; |
| return $result; |
| } |
| |
| sub buildQMakeProject($@) |
| { |
| my ($clean, @buildParams) = @_; |
| |
| my @buildArgs = ("-r"); |
| |
| my $qmakebin = "qmake"; # Allow override of the qmake binary from $PATH |
| my $makeargs = ""; |
| for my $i (0 .. $#buildParams) { |
| my $opt = $buildParams[$i]; |
| if ($opt =~ /^--qmake=(.*)/i ) { |
| $qmakebin = $1; |
| } elsif ($opt =~ /^--qmakearg=(.*)/i ) { |
| push @buildArgs, $1; |
| } elsif ($opt =~ /^--makeargs=(.*)/i ) { |
| $makeargs = $1; |
| } else { |
| push @buildArgs, $opt; |
| } |
| } |
| |
| my $make = qtMakeCommand($qmakebin); |
| my $config = configuration(); |
| my $prefix = $ENV{"WebKitInstallationPrefix"}; |
| my $dir = File::Spec->canonpath(baseProductDir()); |
| $dir = File::Spec->catfile($dir, $config) unless isSymbian(); |
| File::Path::mkpath($dir); |
| chdir $dir or die "Failed to cd into " . $dir . "\n"; |
| |
| print "Generating derived sources\n\n"; |
| |
| my @dsQmakeArgs = @buildArgs; |
| push @dsQmakeArgs, "-r"; |
| push @dsQmakeArgs, sourceDir() . "/DerivedSources.pro"; |
| push @dsQmakeArgs, "-o Makefile.DerivedSources"; |
| print "Calling '$qmakebin @dsQmakeArgs' in " . $dir . "\n\n"; |
| my $result = system "$qmakebin @dsQmakeArgs"; |
| if ($result ne 0) { |
| die "Failed while running $qmakebin to generate derived sources!\n"; |
| } |
| |
| my $dsMakefile = "Makefile.DerivedSources"; |
| |
| # Iterate over different source directories manually to workaround a problem with qmake+extraTargets+s60 |
| for my $subdir ("JavaScriptCore", "WebCore", "WebKit/qt/Api") { |
| print "Calling '$make $makeargs -f $dsMakefile generated_files' in " . $dir . "/$subdir\n\n"; |
| if ($make eq "nmake") { |
| my $subdirWindows = $subdir; |
| $subdirWindows =~ s:/:\\:g; |
| $result = system "pushd $subdirWindows && $make $makeargs -f $dsMakefile generated_files && popd"; |
| } else { |
| $result = system "$make $makeargs -C $subdir -f $dsMakefile generated_files"; |
| } |
| if ($result ne 0) { |
| die "Failed to generate ${subdir}'s derived sources!\n"; |
| } |
| } |
| |
| push @buildArgs, "OUTPUT_DIR=" . baseProductDir() . "/$config"; |
| push @buildArgs, sourceDir() . "/WebKit.pro"; |
| if ($config =~ m/debug/i) { |
| push @buildArgs, "CONFIG-=release"; |
| push @buildArgs, "CONFIG+=debug"; |
| } else { |
| my $passedConfig = passedConfiguration() || ""; |
| if (!isDarwin() || $passedConfig =~ m/release/i) { |
| push @buildArgs, "CONFIG+=release"; |
| push @buildArgs, "CONFIG-=debug"; |
| } else { |
| push @buildArgs, "CONFIG+=debug"; |
| push @buildArgs, "CONFIG+=debug_and_release"; |
| } |
| } |
| |
| print "Calling '$qmakebin @buildArgs' in " . $dir . "\n\n"; |
| print "Installation directory: $prefix\n" if(defined($prefix)); |
| |
| $result = system "$qmakebin @buildArgs"; |
| if ($result ne 0) { |
| die "Failed to setup build environment using $qmakebin!\n"; |
| } |
| |
| if ($clean) { |
| print "Calling '$make $makeargs distclean' in " . $dir . "\n\n"; |
| $result = system "$make $makeargs distclean"; |
| } elsif (isSymbian()) { |
| print "\n\nWebKit is now configured for building, but you have to make\n"; |
| print "a choice about the target yourself. To start the build run:\n\n"; |
| print " make release-armv5|debug-winscw|etc.\n\n"; |
| } else { |
| print "Calling '$make $makeargs' in " . $dir . "\n\n"; |
| $result = system "$make $makeargs"; |
| } |
| |
| chdir ".." or die; |
| return $result; |
| } |
| |
| sub buildQMakeQtProject($$@) |
| { |
| my ($project, $clean, @buildArgs) = @_; |
| |
| return buildQMakeProject($clean, @buildArgs); |
| } |
| |
| sub buildGtkProject($$@) |
| { |
| my ($project, $clean, @buildArgs) = @_; |
| |
| if ($project ne "WebKit") { |
| die "The Gtk port builds JavaScriptCore, WebCore and WebKit in one shot! Only call it for 'WebKit'.\n"; |
| } |
| |
| return buildAutotoolsProject($clean, @buildArgs); |
| } |
| |
| sub buildChromiumMakefile($$$) |
| { |
| my ($dir, $target, $clean) = @_; |
| chdir $dir; |
| if ($clean) { |
| return system qw(rm -rf out); |
| } |
| my $config = configuration(); |
| my @command = ("make", "-j4", "BUILDTYPE=$config", $target); |
| print join(" ", @command) . "\n"; |
| return system @command; |
| } |
| |
| sub buildChromiumVisualStudioProject($$) |
| { |
| my ($projectPath, $clean) = @_; |
| |
| my $config = configuration(); |
| my $action = "/build"; |
| $action = "/clean" if $clean; |
| |
| # Find Visual Studio installation. |
| my $vsInstallDir; |
| my $programFilesPath = $ENV{'PROGRAMFILES'} || "C:\\Program Files"; |
| if ($ENV{'VSINSTALLDIR'}) { |
| $vsInstallDir = $ENV{'VSINSTALLDIR'}; |
| } else { |
| $vsInstallDir = "$programFilesPath/Microsoft Visual Studio 8"; |
| } |
| $vsInstallDir = `cygpath "$vsInstallDir"` if isCygwin(); |
| chomp $vsInstallDir; |
| $vcBuildPath = "$vsInstallDir/Common7/IDE/devenv.com"; |
| if (! -e $vcBuildPath) { |
| # Visual Studio not found, try VC++ Express |
| $vcBuildPath = "$vsInstallDir/Common7/IDE/VCExpress.exe"; |
| if (! -e $vcBuildPath) { |
| print "*************************************************************\n"; |
| print "Cannot find '$vcBuildPath'\n"; |
| print "Please execute the file 'vcvars32.bat' from\n"; |
| print "'$programFilesPath\\Microsoft Visual Studio 8\\VC\\bin\\'\n"; |
| print "to setup the necessary environment variables.\n"; |
| print "*************************************************************\n"; |
| die; |
| } |
| } |
| |
| # Create command line and execute it. |
| my @command = ($vcBuildPath, $projectPath, $action, $config); |
| print "Building results into: ", baseProductDir(), "\n"; |
| print join(" ", @command), "\n"; |
| return system @command; |
| } |
| |
| sub buildChromium($@) |
| { |
| my ($clean, @options) = @_; |
| |
| my $result = 1; |
| if (isDarwin()) { |
| # Mac build - builds the root xcode project. |
| $result = buildXCodeProject("WebKit/chromium/WebKit", $clean, (@options)); |
| } elsif (isCygwin() || isWindows()) { |
| # Windows build - builds the root visual studio solution. |
| $result = buildChromiumVisualStudioProject("WebKit/chromium/WebKit.sln", $clean); |
| } elsif (isLinux()) { |
| # Linux build - build using make. |
| $ result = buildChromiumMakefile("WebKit/chromium/", "all", $clean); |
| } else { |
| print STDERR "This platform is not supported by chromium.\n"; |
| } |
| return $result; |
| } |
| |
| sub appleApplicationSupportPath |
| { |
| open INSTALL_DIR, "</proc/registry/HKEY_LOCAL_MACHINE/SOFTWARE/Apple\ Inc./Apple\ Application\ Support/InstallDir"; |
| my $path = <INSTALL_DIR>; |
| $path =~ s/[\r\n\x00].*//; |
| close INSTALL_DIR; |
| |
| my $unixPath = `cygpath -u '$path'`; |
| chomp $unixPath; |
| return $unixPath; |
| } |
| |
| sub setPathForRunningWebKitApp |
| { |
| my ($env) = @_; |
| |
| if (isAppleWinWebKit()) { |
| $env->{PATH} = join(':', productDir(), dirname(installedSafariPath()), appleApplicationSupportPath(), $env->{PATH} || ""); |
| } elsif (isQt()) { |
| my $qtLibs = `qmake -query QT_INSTALL_LIBS`; |
| $qtLibs =~ s/[\n|\r]$//g; |
| $env->{PATH} = join(';', $qtLibs, productDir() . "/lib", $env->{PATH} || ""); |
| } |
| } |
| |
| sub runSafari |
| { |
| my ($debugger) = @_; |
| |
| if (isAppleMacWebKit()) { |
| return system "$FindBin::Bin/gdb-safari", argumentsForConfiguration() if $debugger; |
| |
| my $productDir = productDir(); |
| print "Starting Safari with DYLD_FRAMEWORK_PATH set to point to built WebKit in $productDir.\n"; |
| $ENV{DYLD_FRAMEWORK_PATH} = $productDir; |
| $ENV{WEBKIT_UNSET_DYLD_FRAMEWORK_PATH} = "YES"; |
| if (!isTiger() && architecture()) { |
| return system "arch", "-" . architecture(), safariPath(), @ARGV; |
| } else { |
| return system safariPath(), @ARGV; |
| } |
| } |
| |
| if (isAppleWinWebKit()) { |
| my $script = "run-webkit-nightly.cmd"; |
| my $result = system "cp", "$FindBin::Bin/$script", productDir(); |
| return $result if $result; |
| |
| my $cwd = getcwd(); |
| chdir productDir(); |
| |
| my $debuggerFlag = $debugger ? "/debugger" : ""; |
| $result = system "cmd", "/c", "call $script $debuggerFlag"; |
| chdir $cwd; |
| return $result; |
| } |
| |
| return 1; |
| } |
| |
| sub runMiniBrowser |
| { |
| if (isAppleMacWebKit()) { |
| my $productDir = productDir(); |
| print "Starting MiniBrowser with DYLD_FRAMEWORK_PATH set to point to $productDir.\n"; |
| $ENV{DYLD_FRAMEWORK_PATH} = $productDir; |
| $ENV{WEBKIT_UNSET_DYLD_FRAMEWORK_PATH} = "YES"; |
| my $miniBrowserPath = "$productDir/MiniBrowser.app/Contents/MacOS/MiniBrowser"; |
| if (!isTiger() && architecture()) { |
| return system "arch", "-" . architecture(), $miniBrowserPath, @ARGV; |
| } else { |
| return system $miniBrowserPath, @ARGV; |
| } |
| } |
| |
| return 1; |
| } |
| |
| sub debugMiniBrowser |
| { |
| if (isAppleMacWebKit()) { |
| my $gdbPath = "/usr/bin/gdb"; |
| die "Can't find gdb executable. Is gdb installed?\n" unless -x $gdbPath; |
| |
| my $productDir = productDir(); |
| |
| $ENV{DYLD_FRAMEWORK_PATH} = $productDir; |
| $ENV{WEBKIT_UNSET_DYLD_FRAMEWORK_PATH} = 'YES'; |
| |
| my $miniBrowserPath = "$productDir/MiniBrowser.app/Contents/MacOS/MiniBrowser"; |
| |
| print "Starting MiniBrowser under gdb with DYLD_FRAMEWORK_PATH set to point to built WebKit2 in $productDir.\n"; |
| my @architectureFlags = ("-arch", architecture()) if !isTiger(); |
| exec $gdbPath, @architectureFlags, $miniBrowserPath or die; |
| return; |
| } |
| |
| return 1; |
| } |
| |
| 1; |
