| /* |
| * Random number generator |
| * Copyright (c) 2010-2011, Jouni Malinen <j@w1.fi> |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| * |
| * This random number generator is used to provide additional entropy to the |
| * one provided by the operating system (os_get_random()) for session key |
| * generation. The os_get_random() output is expected to be secure and the |
| * implementation here is expected to provide only limited protection against |
| * cases where os_get_random() cannot provide strong randomness. This |
| * implementation shall not be assumed to be secure as the sole source of |
| * randomness. The random_get_bytes() function mixes in randomness from |
| * os_get_random() and as such, calls to os_get_random() can be replaced with |
| * calls to random_get_bytes() without reducing security. |
| * |
| * The design here follows partially the design used in the Linux |
| * drivers/char/random.c, but the implementation here is simpler and not as |
| * strong. This is a compromise to reduce duplicated CPU effort and to avoid |
| * extra code/memory size. As pointed out above, os_get_random() needs to be |
| * guaranteed to be secure for any of the security assumptions to hold. |
| */ |
| |
| #include "utils/includes.h" |
| #ifdef __linux__ |
| #include <fcntl.h> |
| #endif /* __linux__ */ |
| |
| #include "utils/common.h" |
| #include "utils/eloop.h" |
| #include "crypto/crypto.h" |
| #include "sha1.h" |
| #include "random.h" |
| |
| #define POOL_WORDS 32 |
| #define POOL_WORDS_MASK (POOL_WORDS - 1) |
| #define POOL_TAP1 26 |
| #define POOL_TAP2 20 |
| #define POOL_TAP3 14 |
| #define POOL_TAP4 7 |
| #define POOL_TAP5 1 |
| #define EXTRACT_LEN 16 |
| #define MIN_READY_MARK 2 |
| |
| static u32 pool[POOL_WORDS]; |
| static unsigned int input_rotate = 0; |
| static unsigned int pool_pos = 0; |
| static u8 dummy_key[20]; |
| #ifdef __linux__ |
| static size_t dummy_key_avail = 0; |
| static int random_fd = -1; |
| #endif /* __linux__ */ |
| static unsigned int own_pool_ready = 0; |
| #define RANDOM_ENTROPY_SIZE 20 |
| static char *random_entropy_file = NULL; |
| static int random_entropy_file_read = 0; |
| |
| #define MIN_COLLECT_ENTROPY 1000 |
| static unsigned int entropy = 0; |
| static unsigned int total_collected = 0; |
| |
| |
| static void random_write_entropy(void); |
| |
| |
| static u32 __ROL32(u32 x, u32 y) |
| { |
| return (x << (y & 31)) | (x >> (32 - (y & 31))); |
| } |
| |
| |
| static void random_mix_pool(const void *buf, size_t len) |
| { |
| static const u32 twist[8] = { |
| 0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158, |
| 0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278 |
| }; |
| const u8 *pos = buf; |
| u32 w; |
| |
| wpa_hexdump_key(MSG_EXCESSIVE, "random_mix_pool", buf, len); |
| |
| while (len--) { |
| w = __ROL32(*pos++, input_rotate & 31); |
| input_rotate += pool_pos ? 7 : 14; |
| pool_pos = (pool_pos - 1) & POOL_WORDS_MASK; |
| w ^= pool[pool_pos]; |
| w ^= pool[(pool_pos + POOL_TAP1) & POOL_WORDS_MASK]; |
| w ^= pool[(pool_pos + POOL_TAP2) & POOL_WORDS_MASK]; |
| w ^= pool[(pool_pos + POOL_TAP3) & POOL_WORDS_MASK]; |
| w ^= pool[(pool_pos + POOL_TAP4) & POOL_WORDS_MASK]; |
| w ^= pool[(pool_pos + POOL_TAP5) & POOL_WORDS_MASK]; |
| pool[pool_pos] = (w >> 3) ^ twist[w & 7]; |
| } |
| } |
| |
| |
| static void random_extract(u8 *out) |
| { |
| unsigned int i; |
| u8 hash[SHA1_MAC_LEN]; |
| u32 *hash_ptr; |
| u32 buf[POOL_WORDS / 2]; |
| |
| /* First, add hash back to pool to make backtracking more difficult. */ |
| hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) pool, |
| sizeof(pool), hash); |
| random_mix_pool(hash, sizeof(hash)); |
| /* Hash half the pool to extra data */ |
| for (i = 0; i < POOL_WORDS / 2; i++) |
| buf[i] = pool[(pool_pos - i) & POOL_WORDS_MASK]; |
| hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) buf, |
| sizeof(buf), hash); |
| /* |
| * Fold the hash to further reduce any potential output pattern. |
| * Though, compromise this to reduce CPU use for the most common output |
| * length (32) and return 16 bytes from instead of only half. |
| */ |
| hash_ptr = (u32 *) hash; |
| hash_ptr[0] ^= hash_ptr[4]; |
| os_memcpy(out, hash, EXTRACT_LEN); |
| } |
| |
| |
| void random_add_randomness(const void *buf, size_t len) |
| { |
| struct os_time t; |
| static unsigned int count = 0; |
| |
| count++; |
| if (entropy > MIN_COLLECT_ENTROPY && (count & 0x3ff) != 0) { |
| /* |
| * No need to add more entropy at this point, so save CPU and |
| * skip the update. |
| */ |
| return; |
| } |
| wpa_printf(MSG_EXCESSIVE, "Add randomness: count=%u entropy=%u", |
| count, entropy); |
| |
| os_get_time(&t); |
| wpa_hexdump_key(MSG_EXCESSIVE, "random pool", |
| (const u8 *) pool, sizeof(pool)); |
| random_mix_pool(&t, sizeof(t)); |
| random_mix_pool(buf, len); |
| wpa_hexdump_key(MSG_EXCESSIVE, "random pool", |
| (const u8 *) pool, sizeof(pool)); |
| entropy++; |
| total_collected++; |
| } |
| |
| |
| int random_get_bytes(void *buf, size_t len) |
| { |
| int ret; |
| u8 *bytes = buf; |
| size_t left; |
| |
| wpa_printf(MSG_MSGDUMP, "Get randomness: len=%u entropy=%u", |
| (unsigned int) len, entropy); |
| |
| /* Start with assumed strong randomness from OS */ |
| ret = os_get_random(buf, len); |
| wpa_hexdump_key(MSG_EXCESSIVE, "random from os_get_random", |
| buf, len); |
| |
| /* Mix in additional entropy extracted from the internal pool */ |
| left = len; |
| while (left) { |
| size_t siz, i; |
| u8 tmp[EXTRACT_LEN]; |
| random_extract(tmp); |
| wpa_hexdump_key(MSG_EXCESSIVE, "random from internal pool", |
| tmp, sizeof(tmp)); |
| siz = left > EXTRACT_LEN ? EXTRACT_LEN : left; |
| for (i = 0; i < siz; i++) |
| *bytes++ ^= tmp[i]; |
| left -= siz; |
| } |
| |
| #ifdef CONFIG_FIPS |
| /* Mix in additional entropy from the crypto module */ |
| left = len; |
| while (left) { |
| size_t siz, i; |
| u8 tmp[EXTRACT_LEN]; |
| if (crypto_get_random(tmp, sizeof(tmp)) < 0) { |
| wpa_printf(MSG_ERROR, "random: No entropy available " |
| "for generating strong random bytes"); |
| return -1; |
| } |
| wpa_hexdump_key(MSG_EXCESSIVE, "random from crypto module", |
| tmp, sizeof(tmp)); |
| siz = left > EXTRACT_LEN ? EXTRACT_LEN : left; |
| for (i = 0; i < siz; i++) |
| *bytes++ ^= tmp[i]; |
| left -= siz; |
| } |
| #endif /* CONFIG_FIPS */ |
| |
| wpa_hexdump_key(MSG_EXCESSIVE, "mixed random", buf, len); |
| |
| if (entropy < len) |
| entropy = 0; |
| else |
| entropy -= len; |
| |
| return ret; |
| } |
| |
| |
| int random_pool_ready(void) |
| { |
| #ifdef __linux__ |
| int fd; |
| ssize_t res; |
| |
| /* |
| * Make sure that there is reasonable entropy available before allowing |
| * some key derivation operations to proceed. |
| */ |
| |
| if (dummy_key_avail == sizeof(dummy_key)) |
| return 1; /* Already initialized - good to continue */ |
| |
| /* |
| * Try to fetch some more data from the kernel high quality |
| * /dev/random. There may not be enough data available at this point, |
| * so use non-blocking read to avoid blocking the application |
| * completely. |
| */ |
| fd = open("/dev/random", O_RDONLY | O_NONBLOCK); |
| if (fd < 0) { |
| #ifndef CONFIG_NO_STDOUT_DEBUG |
| int error = errno; |
| perror("open(/dev/random)"); |
| wpa_printf(MSG_ERROR, "random: Cannot open /dev/random: %s", |
| strerror(error)); |
| #endif /* CONFIG_NO_STDOUT_DEBUG */ |
| return -1; |
| } |
| |
| res = read(fd, dummy_key + dummy_key_avail, |
| sizeof(dummy_key) - dummy_key_avail); |
| if (res < 0) { |
| wpa_printf(MSG_ERROR, "random: Cannot read from /dev/random: " |
| "%s", strerror(errno)); |
| res = 0; |
| } |
| wpa_printf(MSG_DEBUG, "random: Got %u/%u bytes from " |
| "/dev/random", (unsigned) res, |
| (unsigned) (sizeof(dummy_key) - dummy_key_avail)); |
| dummy_key_avail += res; |
| close(fd); |
| |
| if (dummy_key_avail == sizeof(dummy_key)) { |
| if (own_pool_ready < MIN_READY_MARK) |
| own_pool_ready = MIN_READY_MARK; |
| random_write_entropy(); |
| return 1; |
| } |
| |
| wpa_printf(MSG_INFO, "random: Only %u/%u bytes of strong " |
| "random data available from /dev/random", |
| (unsigned) dummy_key_avail, (unsigned) sizeof(dummy_key)); |
| |
| if (own_pool_ready >= MIN_READY_MARK || |
| total_collected + 10 * own_pool_ready > MIN_COLLECT_ENTROPY) { |
| wpa_printf(MSG_INFO, "random: Allow operation to proceed " |
| "based on internal entropy"); |
| return 1; |
| } |
| |
| wpa_printf(MSG_INFO, "random: Not enough entropy pool available for " |
| "secure operations"); |
| return 0; |
| #else /* __linux__ */ |
| /* TODO: could do similar checks on non-Linux platforms */ |
| return 1; |
| #endif /* __linux__ */ |
| } |
| |
| |
| void random_mark_pool_ready(void) |
| { |
| own_pool_ready++; |
| wpa_printf(MSG_DEBUG, "random: Mark internal entropy pool to be " |
| "ready (count=%u/%u)", own_pool_ready, MIN_READY_MARK); |
| random_write_entropy(); |
| } |
| |
| |
| #ifdef __linux__ |
| |
| static void random_close_fd(void) |
| { |
| if (random_fd >= 0) { |
| eloop_unregister_read_sock(random_fd); |
| close(random_fd); |
| random_fd = -1; |
| } |
| } |
| |
| |
| static void random_read_fd(int sock, void *eloop_ctx, void *sock_ctx) |
| { |
| ssize_t res; |
| |
| if (dummy_key_avail == sizeof(dummy_key)) { |
| random_close_fd(); |
| return; |
| } |
| |
| res = read(sock, dummy_key + dummy_key_avail, |
| sizeof(dummy_key) - dummy_key_avail); |
| if (res < 0) { |
| wpa_printf(MSG_ERROR, "random: Cannot read from /dev/random: " |
| "%s", strerror(errno)); |
| return; |
| } |
| |
| wpa_printf(MSG_DEBUG, "random: Got %u/%u bytes from /dev/random", |
| (unsigned) res, |
| (unsigned) (sizeof(dummy_key) - dummy_key_avail)); |
| dummy_key_avail += res; |
| |
| if (dummy_key_avail == sizeof(dummy_key)) { |
| random_close_fd(); |
| if (own_pool_ready < MIN_READY_MARK) |
| own_pool_ready = MIN_READY_MARK; |
| random_write_entropy(); |
| } |
| } |
| |
| #endif /* __linux__ */ |
| |
| |
| static void random_read_entropy(void) |
| { |
| char *buf; |
| size_t len; |
| |
| if (!random_entropy_file) |
| return; |
| |
| buf = os_readfile(random_entropy_file, &len); |
| if (buf == NULL) |
| return; /* entropy file not yet available */ |
| |
| if (len != 1 + RANDOM_ENTROPY_SIZE) { |
| wpa_printf(MSG_DEBUG, "random: Invalid entropy file %s", |
| random_entropy_file); |
| os_free(buf); |
| return; |
| } |
| |
| own_pool_ready = (u8) buf[0]; |
| random_add_randomness(buf + 1, RANDOM_ENTROPY_SIZE); |
| random_entropy_file_read = 1; |
| os_free(buf); |
| wpa_printf(MSG_DEBUG, "random: Added entropy from %s " |
| "(own_pool_ready=%u)", |
| random_entropy_file, own_pool_ready); |
| } |
| |
| |
| static void random_write_entropy(void) |
| { |
| char buf[RANDOM_ENTROPY_SIZE]; |
| FILE *f; |
| u8 opr; |
| int fail = 0; |
| |
| if (!random_entropy_file) |
| return; |
| |
| if (random_get_bytes(buf, RANDOM_ENTROPY_SIZE) < 0) |
| return; |
| |
| f = fopen(random_entropy_file, "wb"); |
| if (f == NULL) { |
| wpa_printf(MSG_ERROR, "random: Could not open entropy file %s " |
| "for writing", random_entropy_file); |
| return; |
| } |
| |
| opr = own_pool_ready > 0xff ? 0xff : own_pool_ready; |
| if (fwrite(&opr, 1, 1, f) != 1 || |
| fwrite(buf, RANDOM_ENTROPY_SIZE, 1, f) != 1) |
| fail = 1; |
| fclose(f); |
| if (fail) { |
| wpa_printf(MSG_ERROR, "random: Could not write entropy data " |
| "to %s", random_entropy_file); |
| return; |
| } |
| |
| wpa_printf(MSG_DEBUG, "random: Updated entropy file %s " |
| "(own_pool_ready=%u)", |
| random_entropy_file, own_pool_ready); |
| } |
| |
| |
| void random_init(const char *entropy_file) |
| { |
| os_free(random_entropy_file); |
| if (entropy_file) |
| random_entropy_file = os_strdup(entropy_file); |
| else |
| random_entropy_file = NULL; |
| random_read_entropy(); |
| |
| #ifdef __linux__ |
| if (random_fd >= 0) |
| return; |
| |
| random_fd = open("/dev/random", O_RDONLY | O_NONBLOCK); |
| if (random_fd < 0) { |
| #ifndef CONFIG_NO_STDOUT_DEBUG |
| int error = errno; |
| perror("open(/dev/random)"); |
| wpa_printf(MSG_ERROR, "random: Cannot open /dev/random: %s", |
| strerror(error)); |
| #endif /* CONFIG_NO_STDOUT_DEBUG */ |
| return; |
| } |
| wpa_printf(MSG_DEBUG, "random: Trying to read entropy from " |
| "/dev/random"); |
| |
| eloop_register_read_sock(random_fd, random_read_fd, NULL, NULL); |
| #endif /* __linux__ */ |
| |
| random_write_entropy(); |
| } |
| |
| |
| void random_deinit(void) |
| { |
| #ifdef __linux__ |
| random_close_fd(); |
| #endif /* __linux__ */ |
| random_write_entropy(); |
| os_free(random_entropy_file); |
| random_entropy_file = NULL; |
| } |