| /* |
| * WPA Supplicant - test code |
| * Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi> |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| * |
| * IEEE 802.1X Supplicant test code (to be used in place of wpa_supplicant.c. |
| * Not used in production version. |
| */ |
| |
| #include "includes.h" |
| #include <assert.h> |
| |
| #include "common.h" |
| #include "utils/ext_password.h" |
| #include "config.h" |
| #include "eapol_supp/eapol_supp_sm.h" |
| #include "eap_peer/eap.h" |
| #include "eap_server/eap_methods.h" |
| #include "eloop.h" |
| #include "utils/base64.h" |
| #include "rsn_supp/wpa.h" |
| #include "wpa_supplicant_i.h" |
| #include "radius/radius.h" |
| #include "radius/radius_client.h" |
| #include "common/wpa_ctrl.h" |
| #include "ctrl_iface.h" |
| #include "pcsc_funcs.h" |
| |
| |
| extern int wpa_debug_level; |
| extern int wpa_debug_show_keys; |
| |
| struct wpa_driver_ops *wpa_drivers[] = { NULL }; |
| |
| |
| struct extra_radius_attr { |
| u8 type; |
| char syntax; |
| char *data; |
| struct extra_radius_attr *next; |
| }; |
| |
| struct eapol_test_data { |
| struct wpa_supplicant *wpa_s; |
| |
| int eapol_test_num_reauths; |
| int no_mppe_keys; |
| int num_mppe_ok, num_mppe_mismatch; |
| |
| u8 radius_identifier; |
| struct radius_msg *last_recv_radius; |
| struct in_addr own_ip_addr; |
| struct radius_client_data *radius; |
| struct hostapd_radius_servers *radius_conf; |
| |
| /* last received EAP Response from Authentication Server */ |
| struct wpabuf *last_eap_radius; |
| |
| u8 authenticator_pmk[PMK_LEN]; |
| size_t authenticator_pmk_len; |
| int radius_access_accept_received; |
| int radius_access_reject_received; |
| int auth_timed_out; |
| |
| u8 *eap_identity; |
| size_t eap_identity_len; |
| |
| char *connect_info; |
| u8 own_addr[ETH_ALEN]; |
| struct extra_radius_attr *extra_attrs; |
| |
| FILE *server_cert_file; |
| }; |
| |
| static struct eapol_test_data eapol_test; |
| |
| |
| static void send_eap_request_identity(void *eloop_ctx, void *timeout_ctx); |
| |
| |
| static void hostapd_logger_cb(void *ctx, const u8 *addr, unsigned int module, |
| int level, const char *txt, size_t len) |
| { |
| if (addr) |
| wpa_printf(MSG_DEBUG, "STA " MACSTR ": %s\n", |
| MAC2STR(addr), txt); |
| else |
| wpa_printf(MSG_DEBUG, "%s", txt); |
| } |
| |
| |
| static int add_extra_attr(struct radius_msg *msg, |
| struct extra_radius_attr *attr) |
| { |
| size_t len; |
| char *pos; |
| u32 val; |
| char buf[RADIUS_MAX_ATTR_LEN + 1]; |
| |
| switch (attr->syntax) { |
| case 's': |
| os_snprintf(buf, sizeof(buf), "%s", attr->data); |
| len = os_strlen(buf); |
| break; |
| case 'n': |
| buf[0] = '\0'; |
| len = 1; |
| break; |
| case 'x': |
| pos = attr->data; |
| if (pos[0] == '0' && pos[1] == 'x') |
| pos += 2; |
| len = os_strlen(pos); |
| if ((len & 1) || (len / 2) > RADIUS_MAX_ATTR_LEN) { |
| printf("Invalid extra attribute hexstring\n"); |
| return -1; |
| } |
| len /= 2; |
| if (hexstr2bin(pos, (u8 *) buf, len) < 0) { |
| printf("Invalid extra attribute hexstring\n"); |
| return -1; |
| } |
| break; |
| case 'd': |
| val = htonl(atoi(attr->data)); |
| os_memcpy(buf, &val, 4); |
| len = 4; |
| break; |
| default: |
| printf("Incorrect extra attribute syntax specification\n"); |
| return -1; |
| } |
| |
| if (!radius_msg_add_attr(msg, attr->type, (u8 *) buf, len)) { |
| printf("Could not add attribute %d\n", attr->type); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int add_extra_attrs(struct radius_msg *msg, |
| struct extra_radius_attr *attrs) |
| { |
| struct extra_radius_attr *p; |
| for (p = attrs; p; p = p->next) { |
| if (add_extra_attr(msg, p) < 0) |
| return -1; |
| } |
| return 0; |
| } |
| |
| |
| static struct extra_radius_attr * |
| find_extra_attr(struct extra_radius_attr *attrs, u8 type) |
| { |
| struct extra_radius_attr *p; |
| for (p = attrs; p; p = p->next) { |
| if (p->type == type) |
| return p; |
| } |
| return NULL; |
| } |
| |
| |
| static void ieee802_1x_encapsulate_radius(struct eapol_test_data *e, |
| const u8 *eap, size_t len) |
| { |
| struct radius_msg *msg; |
| char buf[RADIUS_MAX_ATTR_LEN + 1]; |
| const struct eap_hdr *hdr; |
| const u8 *pos; |
| |
| wpa_printf(MSG_DEBUG, "Encapsulating EAP message into a RADIUS " |
| "packet"); |
| |
| e->radius_identifier = radius_client_get_id(e->radius); |
| msg = radius_msg_new(RADIUS_CODE_ACCESS_REQUEST, |
| e->radius_identifier); |
| if (msg == NULL) { |
| printf("Could not create net RADIUS packet\n"); |
| return; |
| } |
| |
| radius_msg_make_authenticator(msg, (u8 *) e, sizeof(*e)); |
| |
| hdr = (const struct eap_hdr *) eap; |
| pos = (const u8 *) (hdr + 1); |
| if (len > sizeof(*hdr) && hdr->code == EAP_CODE_RESPONSE && |
| pos[0] == EAP_TYPE_IDENTITY) { |
| pos++; |
| os_free(e->eap_identity); |
| e->eap_identity_len = len - sizeof(*hdr) - 1; |
| e->eap_identity = os_malloc(e->eap_identity_len); |
| if (e->eap_identity) { |
| os_memcpy(e->eap_identity, pos, e->eap_identity_len); |
| wpa_hexdump(MSG_DEBUG, "Learned identity from " |
| "EAP-Response-Identity", |
| e->eap_identity, e->eap_identity_len); |
| } |
| } |
| |
| if (e->eap_identity && |
| !radius_msg_add_attr(msg, RADIUS_ATTR_USER_NAME, |
| e->eap_identity, e->eap_identity_len)) { |
| printf("Could not add User-Name\n"); |
| goto fail; |
| } |
| |
| if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_NAS_IP_ADDRESS) && |
| !radius_msg_add_attr(msg, RADIUS_ATTR_NAS_IP_ADDRESS, |
| (u8 *) &e->own_ip_addr, 4)) { |
| printf("Could not add NAS-IP-Address\n"); |
| goto fail; |
| } |
| |
| os_snprintf(buf, sizeof(buf), RADIUS_802_1X_ADDR_FORMAT, |
| MAC2STR(e->wpa_s->own_addr)); |
| if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_CALLING_STATION_ID) |
| && |
| !radius_msg_add_attr(msg, RADIUS_ATTR_CALLING_STATION_ID, |
| (u8 *) buf, os_strlen(buf))) { |
| printf("Could not add Calling-Station-Id\n"); |
| goto fail; |
| } |
| |
| /* TODO: should probably check MTU from driver config; 2304 is max for |
| * IEEE 802.11, but use 1400 to avoid problems with too large packets |
| */ |
| if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_FRAMED_MTU) && |
| !radius_msg_add_attr_int32(msg, RADIUS_ATTR_FRAMED_MTU, 1400)) { |
| printf("Could not add Framed-MTU\n"); |
| goto fail; |
| } |
| |
| if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_NAS_PORT_TYPE) && |
| !radius_msg_add_attr_int32(msg, RADIUS_ATTR_NAS_PORT_TYPE, |
| RADIUS_NAS_PORT_TYPE_IEEE_802_11)) { |
| printf("Could not add NAS-Port-Type\n"); |
| goto fail; |
| } |
| |
| os_snprintf(buf, sizeof(buf), "%s", e->connect_info); |
| if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_CONNECT_INFO) && |
| !radius_msg_add_attr(msg, RADIUS_ATTR_CONNECT_INFO, |
| (u8 *) buf, os_strlen(buf))) { |
| printf("Could not add Connect-Info\n"); |
| goto fail; |
| } |
| |
| if (add_extra_attrs(msg, e->extra_attrs) < 0) |
| goto fail; |
| |
| if (eap && !radius_msg_add_eap(msg, eap, len)) { |
| printf("Could not add EAP-Message\n"); |
| goto fail; |
| } |
| |
| /* State attribute must be copied if and only if this packet is |
| * Access-Request reply to the previous Access-Challenge */ |
| if (e->last_recv_radius && |
| radius_msg_get_hdr(e->last_recv_radius)->code == |
| RADIUS_CODE_ACCESS_CHALLENGE) { |
| int res = radius_msg_copy_attr(msg, e->last_recv_radius, |
| RADIUS_ATTR_STATE); |
| if (res < 0) { |
| printf("Could not copy State attribute from previous " |
| "Access-Challenge\n"); |
| goto fail; |
| } |
| if (res > 0) { |
| wpa_printf(MSG_DEBUG, " Copied RADIUS State " |
| "Attribute"); |
| } |
| } |
| |
| if (radius_client_send(e->radius, msg, RADIUS_AUTH, e->wpa_s->own_addr) |
| < 0) |
| goto fail; |
| return; |
| |
| fail: |
| radius_msg_free(msg); |
| } |
| |
| |
| static int eapol_test_eapol_send(void *ctx, int type, const u8 *buf, |
| size_t len) |
| { |
| printf("WPA: eapol_test_eapol_send(type=%d len=%lu)\n", |
| type, (unsigned long) len); |
| if (type == IEEE802_1X_TYPE_EAP_PACKET) { |
| wpa_hexdump(MSG_DEBUG, "TX EAP -> RADIUS", buf, len); |
| ieee802_1x_encapsulate_radius(&eapol_test, buf, len); |
| } |
| return 0; |
| } |
| |
| |
| static void eapol_test_set_config_blob(void *ctx, |
| struct wpa_config_blob *blob) |
| { |
| struct eapol_test_data *e = ctx; |
| wpa_config_set_blob(e->wpa_s->conf, blob); |
| } |
| |
| |
| static const struct wpa_config_blob * |
| eapol_test_get_config_blob(void *ctx, const char *name) |
| { |
| struct eapol_test_data *e = ctx; |
| return wpa_config_get_blob(e->wpa_s->conf, name); |
| } |
| |
| |
| static void eapol_test_eapol_done_cb(void *ctx) |
| { |
| printf("WPA: EAPOL processing complete\n"); |
| } |
| |
| |
| static void eapol_sm_reauth(void *eloop_ctx, void *timeout_ctx) |
| { |
| struct eapol_test_data *e = eloop_ctx; |
| printf("\n\n\n\n\neapol_test: Triggering EAP reauthentication\n\n"); |
| e->radius_access_accept_received = 0; |
| send_eap_request_identity(e->wpa_s, NULL); |
| } |
| |
| |
| static int eapol_test_compare_pmk(struct eapol_test_data *e) |
| { |
| u8 pmk[PMK_LEN]; |
| int ret = 1; |
| |
| if (eapol_sm_get_key(e->wpa_s->eapol, pmk, PMK_LEN) == 0) { |
| wpa_hexdump(MSG_DEBUG, "PMK from EAPOL", pmk, PMK_LEN); |
| if (os_memcmp(pmk, e->authenticator_pmk, PMK_LEN) != 0) { |
| printf("WARNING: PMK mismatch\n"); |
| wpa_hexdump(MSG_DEBUG, "PMK from AS", |
| e->authenticator_pmk, PMK_LEN); |
| } else if (e->radius_access_accept_received) |
| ret = 0; |
| } else if (e->authenticator_pmk_len == 16 && |
| eapol_sm_get_key(e->wpa_s->eapol, pmk, 16) == 0) { |
| wpa_hexdump(MSG_DEBUG, "LEAP PMK from EAPOL", pmk, 16); |
| if (os_memcmp(pmk, e->authenticator_pmk, 16) != 0) { |
| printf("WARNING: PMK mismatch\n"); |
| wpa_hexdump(MSG_DEBUG, "PMK from AS", |
| e->authenticator_pmk, 16); |
| } else if (e->radius_access_accept_received) |
| ret = 0; |
| } else if (e->radius_access_accept_received && e->no_mppe_keys) { |
| /* No keying material expected */ |
| ret = 0; |
| } |
| |
| if (ret && !e->no_mppe_keys) |
| e->num_mppe_mismatch++; |
| else if (!e->no_mppe_keys) |
| e->num_mppe_ok++; |
| |
| return ret; |
| } |
| |
| |
| static void eapol_sm_cb(struct eapol_sm *eapol, int success, void *ctx) |
| { |
| struct eapol_test_data *e = ctx; |
| printf("eapol_sm_cb: success=%d\n", success); |
| e->eapol_test_num_reauths--; |
| if (e->eapol_test_num_reauths < 0) |
| eloop_terminate(); |
| else { |
| eapol_test_compare_pmk(e); |
| eloop_register_timeout(0, 100000, eapol_sm_reauth, e, NULL); |
| } |
| } |
| |
| |
| static void eapol_test_write_cert(FILE *f, const char *subject, |
| const struct wpabuf *cert) |
| { |
| unsigned char *encoded; |
| |
| encoded = base64_encode(wpabuf_head(cert), wpabuf_len(cert), NULL); |
| if (encoded == NULL) |
| return; |
| fprintf(f, "%s\n-----BEGIN CERTIFICATE-----\n%s" |
| "-----END CERTIFICATE-----\n\n", subject, encoded); |
| os_free(encoded); |
| } |
| |
| |
| static void eapol_test_cert_cb(void *ctx, int depth, const char *subject, |
| const char *cert_hash, |
| const struct wpabuf *cert) |
| { |
| struct eapol_test_data *e = ctx; |
| |
| wpa_msg(e->wpa_s, MSG_INFO, WPA_EVENT_EAP_PEER_CERT |
| "depth=%d subject='%s'%s%s", |
| depth, subject, |
| cert_hash ? " hash=" : "", |
| cert_hash ? cert_hash : ""); |
| |
| if (cert) { |
| char *cert_hex; |
| size_t len = wpabuf_len(cert) * 2 + 1; |
| cert_hex = os_malloc(len); |
| if (cert_hex) { |
| wpa_snprintf_hex(cert_hex, len, wpabuf_head(cert), |
| wpabuf_len(cert)); |
| wpa_msg_ctrl(e->wpa_s, MSG_INFO, |
| WPA_EVENT_EAP_PEER_CERT |
| "depth=%d subject='%s' cert=%s", |
| depth, subject, cert_hex); |
| os_free(cert_hex); |
| } |
| |
| if (e->server_cert_file) |
| eapol_test_write_cert(e->server_cert_file, |
| subject, cert); |
| } |
| } |
| |
| |
| static void eapol_test_set_anon_id(void *ctx, const u8 *id, size_t len) |
| { |
| struct eapol_test_data *e = ctx; |
| struct wpa_supplicant *wpa_s = e->wpa_s; |
| char *str; |
| int res; |
| |
| wpa_hexdump_ascii(MSG_DEBUG, "EAP method updated anonymous_identity", |
| id, len); |
| |
| if (wpa_s->current_ssid == NULL) |
| return; |
| |
| if (id == NULL) { |
| if (wpa_config_set(wpa_s->current_ssid, "anonymous_identity", |
| "NULL", 0) < 0) |
| return; |
| } else { |
| str = os_malloc(len * 2 + 1); |
| if (str == NULL) |
| return; |
| wpa_snprintf_hex(str, len * 2 + 1, id, len); |
| res = wpa_config_set(wpa_s->current_ssid, "anonymous_identity", |
| str, 0); |
| os_free(str); |
| if (res < 0) |
| return; |
| } |
| } |
| |
| |
| static int test_eapol(struct eapol_test_data *e, struct wpa_supplicant *wpa_s, |
| struct wpa_ssid *ssid) |
| { |
| struct eapol_config eapol_conf; |
| struct eapol_ctx *ctx; |
| |
| ctx = os_zalloc(sizeof(*ctx)); |
| if (ctx == NULL) { |
| printf("Failed to allocate EAPOL context.\n"); |
| return -1; |
| } |
| ctx->ctx = e; |
| ctx->msg_ctx = wpa_s; |
| ctx->scard_ctx = wpa_s->scard; |
| ctx->cb = eapol_sm_cb; |
| ctx->cb_ctx = e; |
| ctx->eapol_send_ctx = wpa_s; |
| ctx->preauth = 0; |
| ctx->eapol_done_cb = eapol_test_eapol_done_cb; |
| ctx->eapol_send = eapol_test_eapol_send; |
| ctx->set_config_blob = eapol_test_set_config_blob; |
| ctx->get_config_blob = eapol_test_get_config_blob; |
| ctx->opensc_engine_path = wpa_s->conf->opensc_engine_path; |
| ctx->pkcs11_engine_path = wpa_s->conf->pkcs11_engine_path; |
| ctx->pkcs11_module_path = wpa_s->conf->pkcs11_module_path; |
| ctx->cert_cb = eapol_test_cert_cb; |
| ctx->cert_in_cb = 1; |
| ctx->set_anon_id = eapol_test_set_anon_id; |
| |
| wpa_s->eapol = eapol_sm_init(ctx); |
| if (wpa_s->eapol == NULL) { |
| os_free(ctx); |
| printf("Failed to initialize EAPOL state machines.\n"); |
| return -1; |
| } |
| |
| wpa_s->current_ssid = ssid; |
| os_memset(&eapol_conf, 0, sizeof(eapol_conf)); |
| eapol_conf.accept_802_1x_keys = 1; |
| eapol_conf.required_keys = 0; |
| eapol_conf.fast_reauth = wpa_s->conf->fast_reauth; |
| eapol_conf.workaround = ssid->eap_workaround; |
| eapol_sm_notify_config(wpa_s->eapol, &ssid->eap, &eapol_conf); |
| eapol_sm_register_scard_ctx(wpa_s->eapol, wpa_s->scard); |
| |
| |
| eapol_sm_notify_portValid(wpa_s->eapol, FALSE); |
| /* 802.1X::portControl = Auto */ |
| eapol_sm_notify_portEnabled(wpa_s->eapol, TRUE); |
| |
| return 0; |
| } |
| |
| |
| static void test_eapol_clean(struct eapol_test_data *e, |
| struct wpa_supplicant *wpa_s) |
| { |
| struct extra_radius_attr *p, *prev; |
| |
| radius_client_deinit(e->radius); |
| wpabuf_free(e->last_eap_radius); |
| radius_msg_free(e->last_recv_radius); |
| e->last_recv_radius = NULL; |
| os_free(e->eap_identity); |
| e->eap_identity = NULL; |
| eapol_sm_deinit(wpa_s->eapol); |
| wpa_s->eapol = NULL; |
| if (e->radius_conf && e->radius_conf->auth_server) { |
| os_free(e->radius_conf->auth_server->shared_secret); |
| os_free(e->radius_conf->auth_server); |
| } |
| os_free(e->radius_conf); |
| e->radius_conf = NULL; |
| scard_deinit(wpa_s->scard); |
| if (wpa_s->ctrl_iface) { |
| wpa_supplicant_ctrl_iface_deinit(wpa_s->ctrl_iface); |
| wpa_s->ctrl_iface = NULL; |
| } |
| |
| ext_password_deinit(wpa_s->ext_pw); |
| wpa_s->ext_pw = NULL; |
| |
| wpa_config_free(wpa_s->conf); |
| |
| p = e->extra_attrs; |
| while (p) { |
| prev = p; |
| p = p->next; |
| os_free(prev); |
| } |
| } |
| |
| |
| static void send_eap_request_identity(void *eloop_ctx, void *timeout_ctx) |
| { |
| struct wpa_supplicant *wpa_s = eloop_ctx; |
| u8 buf[100], *pos; |
| struct ieee802_1x_hdr *hdr; |
| struct eap_hdr *eap; |
| |
| hdr = (struct ieee802_1x_hdr *) buf; |
| hdr->version = EAPOL_VERSION; |
| hdr->type = IEEE802_1X_TYPE_EAP_PACKET; |
| hdr->length = htons(5); |
| |
| eap = (struct eap_hdr *) (hdr + 1); |
| eap->code = EAP_CODE_REQUEST; |
| eap->identifier = 0; |
| eap->length = htons(5); |
| pos = (u8 *) (eap + 1); |
| *pos = EAP_TYPE_IDENTITY; |
| |
| printf("Sending fake EAP-Request-Identity\n"); |
| eapol_sm_rx_eapol(wpa_s->eapol, wpa_s->bssid, buf, |
| sizeof(*hdr) + 5); |
| } |
| |
| |
| static void eapol_test_timeout(void *eloop_ctx, void *timeout_ctx) |
| { |
| struct eapol_test_data *e = eloop_ctx; |
| printf("EAPOL test timed out\n"); |
| e->auth_timed_out = 1; |
| eloop_terminate(); |
| } |
| |
| |
| static char *eap_type_text(u8 type) |
| { |
| switch (type) { |
| case EAP_TYPE_IDENTITY: return "Identity"; |
| case EAP_TYPE_NOTIFICATION: return "Notification"; |
| case EAP_TYPE_NAK: return "Nak"; |
| case EAP_TYPE_TLS: return "TLS"; |
| case EAP_TYPE_TTLS: return "TTLS"; |
| case EAP_TYPE_PEAP: return "PEAP"; |
| case EAP_TYPE_SIM: return "SIM"; |
| case EAP_TYPE_GTC: return "GTC"; |
| case EAP_TYPE_MD5: return "MD5"; |
| case EAP_TYPE_OTP: return "OTP"; |
| case EAP_TYPE_FAST: return "FAST"; |
| case EAP_TYPE_SAKE: return "SAKE"; |
| case EAP_TYPE_PSK: return "PSK"; |
| default: return "Unknown"; |
| } |
| } |
| |
| |
| static void ieee802_1x_decapsulate_radius(struct eapol_test_data *e) |
| { |
| struct wpabuf *eap; |
| const struct eap_hdr *hdr; |
| int eap_type = -1; |
| char buf[64]; |
| struct radius_msg *msg; |
| |
| if (e->last_recv_radius == NULL) |
| return; |
| |
| msg = e->last_recv_radius; |
| |
| eap = radius_msg_get_eap(msg); |
| if (eap == NULL) { |
| /* draft-aboba-radius-rfc2869bis-20.txt, Chap. 2.6.3: |
| * RADIUS server SHOULD NOT send Access-Reject/no EAP-Message |
| * attribute */ |
| wpa_printf(MSG_DEBUG, "could not extract " |
| "EAP-Message from RADIUS message"); |
| wpabuf_free(e->last_eap_radius); |
| e->last_eap_radius = NULL; |
| return; |
| } |
| |
| if (wpabuf_len(eap) < sizeof(*hdr)) { |
| wpa_printf(MSG_DEBUG, "too short EAP packet " |
| "received from authentication server"); |
| wpabuf_free(eap); |
| return; |
| } |
| |
| if (wpabuf_len(eap) > sizeof(*hdr)) |
| eap_type = (wpabuf_head_u8(eap))[sizeof(*hdr)]; |
| |
| hdr = wpabuf_head(eap); |
| switch (hdr->code) { |
| case EAP_CODE_REQUEST: |
| os_snprintf(buf, sizeof(buf), "EAP-Request-%s (%d)", |
| eap_type >= 0 ? eap_type_text(eap_type) : "??", |
| eap_type); |
| break; |
| case EAP_CODE_RESPONSE: |
| os_snprintf(buf, sizeof(buf), "EAP Response-%s (%d)", |
| eap_type >= 0 ? eap_type_text(eap_type) : "??", |
| eap_type); |
| break; |
| case EAP_CODE_SUCCESS: |
| os_strlcpy(buf, "EAP Success", sizeof(buf)); |
| /* LEAP uses EAP Success within an authentication, so must not |
| * stop here with eloop_terminate(); */ |
| break; |
| case EAP_CODE_FAILURE: |
| os_strlcpy(buf, "EAP Failure", sizeof(buf)); |
| eloop_terminate(); |
| break; |
| default: |
| os_strlcpy(buf, "unknown EAP code", sizeof(buf)); |
| wpa_hexdump_buf(MSG_DEBUG, "Decapsulated EAP packet", eap); |
| break; |
| } |
| wpa_printf(MSG_DEBUG, "decapsulated EAP packet (code=%d " |
| "id=%d len=%d) from RADIUS server: %s", |
| hdr->code, hdr->identifier, ntohs(hdr->length), buf); |
| |
| /* sta->eapol_sm->be_auth.idFromServer = hdr->identifier; */ |
| |
| wpabuf_free(e->last_eap_radius); |
| e->last_eap_radius = eap; |
| |
| { |
| struct ieee802_1x_hdr *dot1x; |
| dot1x = os_malloc(sizeof(*dot1x) + wpabuf_len(eap)); |
| assert(dot1x != NULL); |
| dot1x->version = EAPOL_VERSION; |
| dot1x->type = IEEE802_1X_TYPE_EAP_PACKET; |
| dot1x->length = htons(wpabuf_len(eap)); |
| os_memcpy((u8 *) (dot1x + 1), wpabuf_head(eap), |
| wpabuf_len(eap)); |
| eapol_sm_rx_eapol(e->wpa_s->eapol, e->wpa_s->bssid, |
| (u8 *) dot1x, |
| sizeof(*dot1x) + wpabuf_len(eap)); |
| os_free(dot1x); |
| } |
| } |
| |
| |
| static void ieee802_1x_get_keys(struct eapol_test_data *e, |
| struct radius_msg *msg, struct radius_msg *req, |
| const u8 *shared_secret, |
| size_t shared_secret_len) |
| { |
| struct radius_ms_mppe_keys *keys; |
| |
| keys = radius_msg_get_ms_keys(msg, req, shared_secret, |
| shared_secret_len); |
| if (keys && keys->send == NULL && keys->recv == NULL) { |
| os_free(keys); |
| keys = radius_msg_get_cisco_keys(msg, req, shared_secret, |
| shared_secret_len); |
| } |
| |
| if (keys) { |
| if (keys->send) { |
| wpa_hexdump(MSG_DEBUG, "MS-MPPE-Send-Key (sign)", |
| keys->send, keys->send_len); |
| } |
| if (keys->recv) { |
| wpa_hexdump(MSG_DEBUG, "MS-MPPE-Recv-Key (crypt)", |
| keys->recv, keys->recv_len); |
| e->authenticator_pmk_len = |
| keys->recv_len > PMK_LEN ? PMK_LEN : |
| keys->recv_len; |
| os_memcpy(e->authenticator_pmk, keys->recv, |
| e->authenticator_pmk_len); |
| if (e->authenticator_pmk_len == 16 && keys->send && |
| keys->send_len == 16) { |
| /* MS-CHAP-v2 derives 16 octet keys */ |
| wpa_printf(MSG_DEBUG, "Use MS-MPPE-Send-Key " |
| "to extend PMK to 32 octets"); |
| os_memcpy(e->authenticator_pmk + |
| e->authenticator_pmk_len, |
| keys->send, keys->send_len); |
| e->authenticator_pmk_len += keys->send_len; |
| } |
| } |
| |
| os_free(keys->send); |
| os_free(keys->recv); |
| os_free(keys); |
| } |
| } |
| |
| |
| /* Process the RADIUS frames from Authentication Server */ |
| static RadiusRxResult |
| ieee802_1x_receive_auth(struct radius_msg *msg, struct radius_msg *req, |
| const u8 *shared_secret, size_t shared_secret_len, |
| void *data) |
| { |
| struct eapol_test_data *e = data; |
| struct radius_hdr *hdr = radius_msg_get_hdr(msg); |
| |
| /* RFC 2869, Ch. 5.13: valid Message-Authenticator attribute MUST be |
| * present when packet contains an EAP-Message attribute */ |
| if (hdr->code == RADIUS_CODE_ACCESS_REJECT && |
| radius_msg_get_attr(msg, RADIUS_ATTR_MESSAGE_AUTHENTICATOR, NULL, |
| 0) < 0 && |
| radius_msg_get_attr(msg, RADIUS_ATTR_EAP_MESSAGE, NULL, 0) < 0) { |
| wpa_printf(MSG_DEBUG, "Allowing RADIUS " |
| "Access-Reject without Message-Authenticator " |
| "since it does not include EAP-Message\n"); |
| } else if (radius_msg_verify(msg, shared_secret, shared_secret_len, |
| req, 1)) { |
| printf("Incoming RADIUS packet did not have correct " |
| "Message-Authenticator - dropped\n"); |
| return RADIUS_RX_UNKNOWN; |
| } |
| |
| if (hdr->code != RADIUS_CODE_ACCESS_ACCEPT && |
| hdr->code != RADIUS_CODE_ACCESS_REJECT && |
| hdr->code != RADIUS_CODE_ACCESS_CHALLENGE) { |
| printf("Unknown RADIUS message code\n"); |
| return RADIUS_RX_UNKNOWN; |
| } |
| |
| e->radius_identifier = -1; |
| wpa_printf(MSG_DEBUG, "RADIUS packet matching with station"); |
| |
| radius_msg_free(e->last_recv_radius); |
| e->last_recv_radius = msg; |
| |
| switch (hdr->code) { |
| case RADIUS_CODE_ACCESS_ACCEPT: |
| e->radius_access_accept_received = 1; |
| ieee802_1x_get_keys(e, msg, req, shared_secret, |
| shared_secret_len); |
| break; |
| case RADIUS_CODE_ACCESS_REJECT: |
| e->radius_access_reject_received = 1; |
| break; |
| } |
| |
| ieee802_1x_decapsulate_radius(e); |
| |
| if ((hdr->code == RADIUS_CODE_ACCESS_ACCEPT && |
| e->eapol_test_num_reauths < 0) || |
| hdr->code == RADIUS_CODE_ACCESS_REJECT) { |
| eloop_terminate(); |
| } |
| |
| return RADIUS_RX_QUEUED; |
| } |
| |
| |
| static void wpa_init_conf(struct eapol_test_data *e, |
| struct wpa_supplicant *wpa_s, const char *authsrv, |
| int port, const char *secret, |
| const char *cli_addr) |
| { |
| struct hostapd_radius_server *as; |
| int res; |
| |
| wpa_s->bssid[5] = 1; |
| os_memcpy(wpa_s->own_addr, e->own_addr, ETH_ALEN); |
| e->own_ip_addr.s_addr = htonl((127 << 24) | 1); |
| os_strlcpy(wpa_s->ifname, "test", sizeof(wpa_s->ifname)); |
| |
| e->radius_conf = os_zalloc(sizeof(struct hostapd_radius_servers)); |
| assert(e->radius_conf != NULL); |
| e->radius_conf->num_auth_servers = 1; |
| as = os_zalloc(sizeof(struct hostapd_radius_server)); |
| assert(as != NULL); |
| #if defined(CONFIG_NATIVE_WINDOWS) || defined(CONFIG_ANSI_C_EXTRA) |
| { |
| int a[4]; |
| u8 *pos; |
| sscanf(authsrv, "%d.%d.%d.%d", &a[0], &a[1], &a[2], &a[3]); |
| pos = (u8 *) &as->addr.u.v4; |
| *pos++ = a[0]; |
| *pos++ = a[1]; |
| *pos++ = a[2]; |
| *pos++ = a[3]; |
| } |
| #else /* CONFIG_NATIVE_WINDOWS or CONFIG_ANSI_C_EXTRA */ |
| inet_aton(authsrv, &as->addr.u.v4); |
| #endif /* CONFIG_NATIVE_WINDOWS or CONFIG_ANSI_C_EXTRA */ |
| as->addr.af = AF_INET; |
| as->port = port; |
| as->shared_secret = (u8 *) os_strdup(secret); |
| as->shared_secret_len = os_strlen(secret); |
| e->radius_conf->auth_server = as; |
| e->radius_conf->auth_servers = as; |
| e->radius_conf->msg_dumps = 1; |
| if (cli_addr) { |
| if (hostapd_parse_ip_addr(cli_addr, |
| &e->radius_conf->client_addr) == 0) |
| e->radius_conf->force_client_addr = 1; |
| else { |
| wpa_printf(MSG_ERROR, "Invalid IP address '%s'", |
| cli_addr); |
| assert(0); |
| } |
| } |
| |
| e->radius = radius_client_init(wpa_s, e->radius_conf); |
| assert(e->radius != NULL); |
| |
| res = radius_client_register(e->radius, RADIUS_AUTH, |
| ieee802_1x_receive_auth, e); |
| assert(res == 0); |
| } |
| |
| |
| static int scard_test(void) |
| { |
| struct scard_data *scard; |
| size_t len; |
| char imsi[20]; |
| unsigned char _rand[16]; |
| #ifdef PCSC_FUNCS |
| unsigned char sres[4]; |
| unsigned char kc[8]; |
| #endif /* PCSC_FUNCS */ |
| #define num_triplets 5 |
| unsigned char rand_[num_triplets][16]; |
| unsigned char sres_[num_triplets][4]; |
| unsigned char kc_[num_triplets][8]; |
| int i, res; |
| size_t j; |
| |
| #define AKA_RAND_LEN 16 |
| #define AKA_AUTN_LEN 16 |
| #define AKA_AUTS_LEN 14 |
| #define RES_MAX_LEN 16 |
| #define IK_LEN 16 |
| #define CK_LEN 16 |
| unsigned char aka_rand[AKA_RAND_LEN]; |
| unsigned char aka_autn[AKA_AUTN_LEN]; |
| unsigned char aka_auts[AKA_AUTS_LEN]; |
| unsigned char aka_res[RES_MAX_LEN]; |
| size_t aka_res_len; |
| unsigned char aka_ik[IK_LEN]; |
| unsigned char aka_ck[CK_LEN]; |
| |
| scard = scard_init(SCARD_TRY_BOTH, NULL); |
| if (scard == NULL) |
| return -1; |
| if (scard_set_pin(scard, "1234")) { |
| wpa_printf(MSG_WARNING, "PIN validation failed"); |
| scard_deinit(scard); |
| return -1; |
| } |
| |
| len = sizeof(imsi); |
| if (scard_get_imsi(scard, imsi, &len)) |
| goto failed; |
| wpa_hexdump_ascii(MSG_DEBUG, "SCARD: IMSI", (u8 *) imsi, len); |
| /* NOTE: Permanent Username: 1 | IMSI */ |
| |
| wpa_printf(MSG_DEBUG, "SCARD: MNC length %d", |
| scard_get_mnc_len(scard)); |
| |
| os_memset(_rand, 0, sizeof(_rand)); |
| if (scard_gsm_auth(scard, _rand, sres, kc)) |
| goto failed; |
| |
| os_memset(_rand, 0xff, sizeof(_rand)); |
| if (scard_gsm_auth(scard, _rand, sres, kc)) |
| goto failed; |
| |
| for (i = 0; i < num_triplets; i++) { |
| os_memset(rand_[i], i, sizeof(rand_[i])); |
| if (scard_gsm_auth(scard, rand_[i], sres_[i], kc_[i])) |
| goto failed; |
| } |
| |
| for (i = 0; i < num_triplets; i++) { |
| printf("1"); |
| for (j = 0; j < len; j++) |
| printf("%c", imsi[j]); |
| printf(","); |
| for (j = 0; j < 16; j++) |
| printf("%02X", rand_[i][j]); |
| printf(","); |
| for (j = 0; j < 4; j++) |
| printf("%02X", sres_[i][j]); |
| printf(","); |
| for (j = 0; j < 8; j++) |
| printf("%02X", kc_[i][j]); |
| printf("\n"); |
| } |
| |
| wpa_printf(MSG_DEBUG, "Trying to use UMTS authentication"); |
| |
| /* seq 39 (0x28) */ |
| os_memset(aka_rand, 0xaa, 16); |
| os_memcpy(aka_autn, "\x86\x71\x31\xcb\xa2\xfc\x61\xdf" |
| "\xa3\xb3\x97\x9d\x07\x32\xa2\x12", 16); |
| |
| res = scard_umts_auth(scard, aka_rand, aka_autn, aka_res, &aka_res_len, |
| aka_ik, aka_ck, aka_auts); |
| if (res == 0) { |
| wpa_printf(MSG_DEBUG, "UMTS auth completed successfully"); |
| wpa_hexdump(MSG_DEBUG, "RES", aka_res, aka_res_len); |
| wpa_hexdump(MSG_DEBUG, "IK", aka_ik, IK_LEN); |
| wpa_hexdump(MSG_DEBUG, "CK", aka_ck, CK_LEN); |
| } else if (res == -2) { |
| wpa_printf(MSG_DEBUG, "UMTS auth resulted in synchronization " |
| "failure"); |
| wpa_hexdump(MSG_DEBUG, "AUTS", aka_auts, AKA_AUTS_LEN); |
| } else { |
| wpa_printf(MSG_DEBUG, "UMTS auth failed"); |
| } |
| |
| failed: |
| scard_deinit(scard); |
| |
| return 0; |
| #undef num_triplets |
| } |
| |
| |
| static int scard_get_triplets(int argc, char *argv[]) |
| { |
| struct scard_data *scard; |
| size_t len; |
| char imsi[20]; |
| unsigned char _rand[16]; |
| unsigned char sres[4]; |
| unsigned char kc[8]; |
| int num_triplets; |
| int i; |
| size_t j; |
| |
| if (argc < 2 || ((num_triplets = atoi(argv[1])) <= 0)) { |
| printf("invalid parameters for sim command\n"); |
| return -1; |
| } |
| |
| if (argc <= 2 || os_strcmp(argv[2], "debug") != 0) { |
| /* disable debug output */ |
| wpa_debug_level = 99; |
| } |
| |
| scard = scard_init(SCARD_GSM_SIM_ONLY, NULL); |
| if (scard == NULL) { |
| printf("Failed to open smartcard connection\n"); |
| return -1; |
| } |
| if (scard_set_pin(scard, argv[0])) { |
| wpa_printf(MSG_WARNING, "PIN validation failed"); |
| scard_deinit(scard); |
| return -1; |
| } |
| |
| len = sizeof(imsi); |
| if (scard_get_imsi(scard, imsi, &len)) { |
| scard_deinit(scard); |
| return -1; |
| } |
| |
| for (i = 0; i < num_triplets; i++) { |
| os_memset(_rand, i, sizeof(_rand)); |
| if (scard_gsm_auth(scard, _rand, sres, kc)) |
| break; |
| |
| /* IMSI:Kc:SRES:RAND */ |
| for (j = 0; j < len; j++) |
| printf("%c", imsi[j]); |
| printf(":"); |
| for (j = 0; j < 8; j++) |
| printf("%02X", kc[j]); |
| printf(":"); |
| for (j = 0; j < 4; j++) |
| printf("%02X", sres[j]); |
| printf(":"); |
| for (j = 0; j < 16; j++) |
| printf("%02X", _rand[j]); |
| printf("\n"); |
| } |
| |
| scard_deinit(scard); |
| |
| return 0; |
| } |
| |
| |
| static void eapol_test_terminate(int sig, void *signal_ctx) |
| { |
| struct wpa_supplicant *wpa_s = signal_ctx; |
| wpa_msg(wpa_s, MSG_INFO, "Signal %d received - terminating", sig); |
| eloop_terminate(); |
| } |
| |
| |
| static void usage(void) |
| { |
| printf("usage:\n" |
| "eapol_test [-nWS] -c<conf> [-a<AS IP>] [-p<AS port>] " |
| "[-s<AS secret>]\\\n" |
| " [-r<count>] [-t<timeout>] [-C<Connect-Info>] \\\n" |
| " [-M<client MAC address>] [-o<server cert file] \\\n" |
| " [-N<attr spec>] \\\n" |
| " [-A<client IP>]\n" |
| "eapol_test scard\n" |
| "eapol_test sim <PIN> <num triplets> [debug]\n" |
| "\n"); |
| printf("options:\n" |
| " -c<conf> = configuration file\n" |
| " -a<AS IP> = IP address of the authentication server, " |
| "default 127.0.0.1\n" |
| " -p<AS port> = UDP port of the authentication server, " |
| "default 1812\n" |
| " -s<AS secret> = shared secret with the authentication " |
| "server, default 'radius'\n" |
| " -A<client IP> = IP address of the client, default: select " |
| "automatically\n" |
| " -r<count> = number of re-authentications\n" |
| " -W = wait for a control interface monitor before starting\n" |
| " -S = save configuration after authentication\n" |
| " -n = no MPPE keys expected\n" |
| " -t<timeout> = sets timeout in seconds (default: 30 s)\n" |
| " -C<Connect-Info> = RADIUS Connect-Info (default: " |
| "CONNECT 11Mbps 802.11b)\n" |
| " -M<client MAC address> = Set own MAC address " |
| "(Calling-Station-Id,\n" |
| " default: 02:00:00:00:00:01)\n" |
| " -o<server cert file> = Write received server certificate\n" |
| " chain to the specified file\n" |
| " -N<attr spec> = send arbitrary attribute specified by:\n" |
| " attr_id:syntax:value or attr_id\n" |
| " attr_id - number id of the attribute\n" |
| " syntax - one of: s, d, x\n" |
| " s = string\n" |
| " d = integer\n" |
| " x = octet string\n" |
| " value - attribute value.\n" |
| " When only attr_id is specified, NULL will be used as " |
| "value.\n" |
| " Multiple attributes can be specified by using the " |
| "option several times.\n"); |
| } |
| |
| |
| int main(int argc, char *argv[]) |
| { |
| struct wpa_supplicant wpa_s; |
| int c, ret = 1, wait_for_monitor = 0, save_config = 0; |
| char *as_addr = "127.0.0.1"; |
| int as_port = 1812; |
| char *as_secret = "radius"; |
| char *cli_addr = NULL; |
| char *conf = NULL; |
| int timeout = 30; |
| char *pos; |
| struct extra_radius_attr *p = NULL, *p1; |
| |
| if (os_program_init()) |
| return -1; |
| |
| hostapd_logger_register_cb(hostapd_logger_cb); |
| |
| os_memset(&eapol_test, 0, sizeof(eapol_test)); |
| eapol_test.connect_info = "CONNECT 11Mbps 802.11b"; |
| os_memcpy(eapol_test.own_addr, "\x02\x00\x00\x00\x00\x01", ETH_ALEN); |
| |
| wpa_debug_level = 0; |
| wpa_debug_show_keys = 1; |
| |
| for (;;) { |
| c = getopt(argc, argv, "a:A:c:C:M:nN:o:p:r:s:St:W"); |
| if (c < 0) |
| break; |
| switch (c) { |
| case 'a': |
| as_addr = optarg; |
| break; |
| case 'A': |
| cli_addr = optarg; |
| break; |
| case 'c': |
| conf = optarg; |
| break; |
| case 'C': |
| eapol_test.connect_info = optarg; |
| break; |
| case 'M': |
| if (hwaddr_aton(optarg, eapol_test.own_addr)) { |
| usage(); |
| return -1; |
| } |
| break; |
| case 'n': |
| eapol_test.no_mppe_keys++; |
| break; |
| case 'o': |
| if (eapol_test.server_cert_file) |
| fclose(eapol_test.server_cert_file); |
| eapol_test.server_cert_file = fopen(optarg, "w"); |
| if (eapol_test.server_cert_file == NULL) { |
| printf("Could not open '%s' for writing\n", |
| optarg); |
| return -1; |
| } |
| break; |
| case 'p': |
| as_port = atoi(optarg); |
| break; |
| case 'r': |
| eapol_test.eapol_test_num_reauths = atoi(optarg); |
| break; |
| case 's': |
| as_secret = optarg; |
| break; |
| case 'S': |
| save_config++; |
| break; |
| case 't': |
| timeout = atoi(optarg); |
| break; |
| case 'W': |
| wait_for_monitor++; |
| break; |
| case 'N': |
| p1 = os_zalloc(sizeof(*p1)); |
| if (p1 == NULL) |
| break; |
| if (!p) |
| eapol_test.extra_attrs = p1; |
| else |
| p->next = p1; |
| p = p1; |
| |
| p->type = atoi(optarg); |
| pos = os_strchr(optarg, ':'); |
| if (pos == NULL) { |
| p->syntax = 'n'; |
| p->data = NULL; |
| break; |
| } |
| |
| pos++; |
| if (pos[0] == '\0' || pos[1] != ':') { |
| printf("Incorrect format of attribute " |
| "specification\n"); |
| break; |
| } |
| |
| p->syntax = pos[0]; |
| p->data = pos + 2; |
| break; |
| default: |
| usage(); |
| return -1; |
| } |
| } |
| |
| if (argc > optind && os_strcmp(argv[optind], "scard") == 0) { |
| return scard_test(); |
| } |
| |
| if (argc > optind && os_strcmp(argv[optind], "sim") == 0) { |
| return scard_get_triplets(argc - optind - 1, |
| &argv[optind + 1]); |
| } |
| |
| if (conf == NULL) { |
| usage(); |
| printf("Configuration file is required.\n"); |
| return -1; |
| } |
| |
| if (eap_register_methods()) { |
| wpa_printf(MSG_ERROR, "Failed to register EAP methods"); |
| return -1; |
| } |
| |
| if (eloop_init()) { |
| wpa_printf(MSG_ERROR, "Failed to initialize event loop"); |
| return -1; |
| } |
| |
| os_memset(&wpa_s, 0, sizeof(wpa_s)); |
| eapol_test.wpa_s = &wpa_s; |
| wpa_s.conf = wpa_config_read(conf); |
| if (wpa_s.conf == NULL) { |
| printf("Failed to parse configuration file '%s'.\n", conf); |
| return -1; |
| } |
| if (wpa_s.conf->ssid == NULL) { |
| printf("No networks defined.\n"); |
| return -1; |
| } |
| |
| wpa_init_conf(&eapol_test, &wpa_s, as_addr, as_port, as_secret, |
| cli_addr); |
| wpa_s.ctrl_iface = wpa_supplicant_ctrl_iface_init(&wpa_s); |
| if (wpa_s.ctrl_iface == NULL) { |
| printf("Failed to initialize control interface '%s'.\n" |
| "You may have another eapol_test process already " |
| "running or the file was\n" |
| "left by an unclean termination of eapol_test in " |
| "which case you will need\n" |
| "to manually remove this file before starting " |
| "eapol_test again.\n", |
| wpa_s.conf->ctrl_interface); |
| return -1; |
| } |
| if (wpa_supplicant_scard_init(&wpa_s, wpa_s.conf->ssid)) |
| return -1; |
| |
| if (test_eapol(&eapol_test, &wpa_s, wpa_s.conf->ssid)) |
| return -1; |
| |
| if (wpas_init_ext_pw(&wpa_s) < 0) |
| return -1; |
| |
| if (wait_for_monitor) |
| wpa_supplicant_ctrl_iface_wait(wpa_s.ctrl_iface); |
| |
| eloop_register_timeout(timeout, 0, eapol_test_timeout, &eapol_test, |
| NULL); |
| eloop_register_timeout(0, 0, send_eap_request_identity, &wpa_s, NULL); |
| eloop_register_signal_terminate(eapol_test_terminate, &wpa_s); |
| eloop_register_signal_reconfig(eapol_test_terminate, &wpa_s); |
| eloop_run(); |
| |
| eloop_cancel_timeout(eapol_test_timeout, &eapol_test, NULL); |
| eloop_cancel_timeout(eapol_sm_reauth, &eapol_test, NULL); |
| |
| if (eapol_test_compare_pmk(&eapol_test) == 0 || |
| eapol_test.no_mppe_keys) |
| ret = 0; |
| if (eapol_test.auth_timed_out) |
| ret = -2; |
| if (eapol_test.radius_access_reject_received) |
| ret = -3; |
| |
| if (save_config) |
| wpa_config_write(conf, wpa_s.conf); |
| |
| test_eapol_clean(&eapol_test, &wpa_s); |
| |
| eap_peer_unregister_methods(); |
| #ifdef CONFIG_AP |
| eap_server_unregister_methods(); |
| #endif /* CONFIG_AP */ |
| |
| eloop_destroy(); |
| |
| if (eapol_test.server_cert_file) |
| fclose(eapol_test.server_cert_file); |
| |
| printf("MPPE keys OK: %d mismatch: %d\n", |
| eapol_test.num_mppe_ok, eapol_test.num_mppe_mismatch); |
| if (eapol_test.num_mppe_mismatch) |
| ret = -4; |
| if (ret) |
| printf("FAILURE\n"); |
| else |
| printf("SUCCESS\n"); |
| |
| os_program_deinit(); |
| |
| return ret; |
| } |