blob: db29b5df0402f131b8302a9be3f2dfe51821da6f [file] [log] [blame]
/*
* WPA Supplicant - Common definitions
* Copyright (c) 2004-2008, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#ifndef DEFS_H
#define DEFS_H
#ifdef FALSE
#undef FALSE
#endif
#ifdef TRUE
#undef TRUE
#endif
typedef enum { FALSE = 0, TRUE = 1 } Boolean;
#define WPA_CIPHER_NONE BIT(0)
#define WPA_CIPHER_WEP40 BIT(1)
#define WPA_CIPHER_WEP104 BIT(2)
#define WPA_CIPHER_TKIP BIT(3)
#define WPA_CIPHER_CCMP BIT(4)
#ifdef CONFIG_IEEE80211W
#define WPA_CIPHER_AES_128_CMAC BIT(5)
#endif /* CONFIG_IEEE80211W */
#define WPA_CIPHER_GCMP BIT(6)
#define WPA_KEY_MGMT_IEEE8021X BIT(0)
#define WPA_KEY_MGMT_PSK BIT(1)
#define WPA_KEY_MGMT_NONE BIT(2)
#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
#define WPA_KEY_MGMT_WPA_NONE BIT(4)
#define WPA_KEY_MGMT_FT_IEEE8021X BIT(5)
#define WPA_KEY_MGMT_FT_PSK BIT(6)
#define WPA_KEY_MGMT_IEEE8021X_SHA256 BIT(7)
#define WPA_KEY_MGMT_PSK_SHA256 BIT(8)
#define WPA_KEY_MGMT_WPS BIT(9)
static inline int wpa_key_mgmt_wpa_ieee8021x(int akm)
{
return !!(akm & (WPA_KEY_MGMT_IEEE8021X |
WPA_KEY_MGMT_FT_IEEE8021X |
WPA_KEY_MGMT_IEEE8021X_SHA256));
}
static inline int wpa_key_mgmt_wpa_psk(int akm)
{
return !!(akm & (WPA_KEY_MGMT_PSK |
WPA_KEY_MGMT_FT_PSK |
WPA_KEY_MGMT_PSK_SHA256));
}
static inline int wpa_key_mgmt_ft(int akm)
{
return !!(akm & (WPA_KEY_MGMT_FT_PSK |
WPA_KEY_MGMT_FT_IEEE8021X));
}
static inline int wpa_key_mgmt_sha256(int akm)
{
return !!(akm & (WPA_KEY_MGMT_PSK_SHA256 |
WPA_KEY_MGMT_IEEE8021X_SHA256));
}
static inline int wpa_key_mgmt_wpa(int akm)
{
return wpa_key_mgmt_wpa_ieee8021x(akm) ||
wpa_key_mgmt_wpa_psk(akm);
}
static inline int wpa_key_mgmt_wpa_any(int akm)
{
return wpa_key_mgmt_wpa(akm) || (akm & WPA_KEY_MGMT_WPA_NONE);
}
#define WPA_PROTO_WPA BIT(0)
#define WPA_PROTO_RSN BIT(1)
#define WPA_AUTH_ALG_OPEN BIT(0)
#define WPA_AUTH_ALG_SHARED BIT(1)
#define WPA_AUTH_ALG_LEAP BIT(2)
#define WPA_AUTH_ALG_FT BIT(3)
enum wpa_alg {
WPA_ALG_NONE,
WPA_ALG_WEP,
WPA_ALG_TKIP,
WPA_ALG_CCMP,
WPA_ALG_IGTK,
WPA_ALG_PMK,
WPA_ALG_GCMP
};
/**
* enum wpa_cipher - Cipher suites
*/
enum wpa_cipher {
CIPHER_NONE,
CIPHER_WEP40,
CIPHER_TKIP,
CIPHER_CCMP,
CIPHER_WEP104,
CIPHER_GCMP
};
/**
* enum wpa_key_mgmt - Key management suites
*/
enum wpa_key_mgmt {
KEY_MGMT_802_1X,
KEY_MGMT_PSK,
KEY_MGMT_NONE,
KEY_MGMT_802_1X_NO_WPA,
KEY_MGMT_WPA_NONE,
KEY_MGMT_FT_802_1X,
KEY_MGMT_FT_PSK,
KEY_MGMT_802_1X_SHA256,
KEY_MGMT_PSK_SHA256,
KEY_MGMT_WPS
};
/**
* enum wpa_states - wpa_supplicant state
*
* These enumeration values are used to indicate the current wpa_supplicant
* state (wpa_s->wpa_state). The current state can be retrieved with
* wpa_supplicant_get_state() function and the state can be changed by calling
* wpa_supplicant_set_state(). In WPA state machine (wpa.c and preauth.c), the
* wrapper functions wpa_sm_get_state() and wpa_sm_set_state() should be used
* to access the state variable.
*/
enum wpa_states {
/**
* WPA_DISCONNECTED - Disconnected state
*
* This state indicates that client is not associated, but is likely to
* start looking for an access point. This state is entered when a
* connection is lost.
*/
WPA_DISCONNECTED,
/**
* WPA_INTERFACE_DISABLED - Interface disabled
*
* This stat eis entered if the network interface is disabled, e.g.,
* due to rfkill. wpa_supplicant refuses any new operations that would
* use the radio until the interface has been enabled.
*/
WPA_INTERFACE_DISABLED,
/**
* WPA_INACTIVE - Inactive state (wpa_supplicant disabled)
*
* This state is entered if there are no enabled networks in the
* configuration. wpa_supplicant is not trying to associate with a new
* network and external interaction (e.g., ctrl_iface call to add or
* enable a network) is needed to start association.
*/
WPA_INACTIVE,
/**
* WPA_SCANNING - Scanning for a network
*
* This state is entered when wpa_supplicant starts scanning for a
* network.
*/
WPA_SCANNING,
/**
* WPA_AUTHENTICATING - Trying to authenticate with a BSS/SSID
*
* This state is entered when wpa_supplicant has found a suitable BSS
* to authenticate with and the driver is configured to try to
* authenticate with this BSS. This state is used only with drivers
* that use wpa_supplicant as the SME.
*/
WPA_AUTHENTICATING,
/**
* WPA_ASSOCIATING - Trying to associate with a BSS/SSID
*
* This state is entered when wpa_supplicant has found a suitable BSS
* to associate with and the driver is configured to try to associate
* with this BSS in ap_scan=1 mode. When using ap_scan=2 mode, this
* state is entered when the driver is configured to try to associate
* with a network using the configured SSID and security policy.
*/
WPA_ASSOCIATING,
/**
* WPA_ASSOCIATED - Association completed
*
* This state is entered when the driver reports that association has
* been successfully completed with an AP. If IEEE 802.1X is used
* (with or without WPA/WPA2), wpa_supplicant remains in this state
* until the IEEE 802.1X/EAPOL authentication has been completed.
*/
WPA_ASSOCIATED,
/**
* WPA_4WAY_HANDSHAKE - WPA 4-Way Key Handshake in progress
*
* This state is entered when WPA/WPA2 4-Way Handshake is started. In
* case of WPA-PSK, this happens when receiving the first EAPOL-Key
* frame after association. In case of WPA-EAP, this state is entered
* when the IEEE 802.1X/EAPOL authentication has been completed.
*/
WPA_4WAY_HANDSHAKE,
/**
* WPA_GROUP_HANDSHAKE - WPA Group Key Handshake in progress
*
* This state is entered when 4-Way Key Handshake has been completed
* (i.e., when the supplicant sends out message 4/4) and when Group
* Key rekeying is started by the AP (i.e., when supplicant receives
* message 1/2).
*/
WPA_GROUP_HANDSHAKE,
/**
* WPA_COMPLETED - All authentication completed
*
* This state is entered when the full authentication process is
* completed. In case of WPA2, this happens when the 4-Way Handshake is
* successfully completed. With WPA, this state is entered after the
* Group Key Handshake; with IEEE 802.1X (non-WPA) connection is
* completed after dynamic keys are received (or if not used, after
* the EAP authentication has been completed). With static WEP keys and
* plaintext connections, this state is entered when an association
* has been completed.
*
* This state indicates that the supplicant has completed its
* processing for the association phase and that data connection is
* fully configured.
*/
WPA_COMPLETED
};
#define MLME_SETPROTECTION_PROTECT_TYPE_NONE 0
#define MLME_SETPROTECTION_PROTECT_TYPE_RX 1
#define MLME_SETPROTECTION_PROTECT_TYPE_TX 2
#define MLME_SETPROTECTION_PROTECT_TYPE_RX_TX 3
#define MLME_SETPROTECTION_KEY_TYPE_GROUP 0
#define MLME_SETPROTECTION_KEY_TYPE_PAIRWISE 1
/**
* enum mfp_options - Management frame protection (IEEE 802.11w) options
*/
enum mfp_options {
NO_MGMT_FRAME_PROTECTION = 0,
MGMT_FRAME_PROTECTION_OPTIONAL = 1,
MGMT_FRAME_PROTECTION_REQUIRED = 2
};
/**
* enum hostapd_hw_mode - Hardware mode
*/
enum hostapd_hw_mode {
HOSTAPD_MODE_IEEE80211B,
HOSTAPD_MODE_IEEE80211G,
HOSTAPD_MODE_IEEE80211A,
NUM_HOSTAPD_MODES
};
/**
* enum wpa_ctrl_req_type - Control interface request types
*/
enum wpa_ctrl_req_type {
WPA_CTRL_REQ_UNKNOWN,
WPA_CTRL_REQ_EAP_IDENTITY,
WPA_CTRL_REQ_EAP_PASSWORD,
WPA_CTRL_REQ_EAP_NEW_PASSWORD,
WPA_CTRL_REQ_EAP_PIN,
WPA_CTRL_REQ_EAP_OTP,
WPA_CTRL_REQ_EAP_PASSPHRASE,
NUM_WPA_CTRL_REQS
};
/* Maximum number of EAP methods to store for EAP server user information */
#define EAP_MAX_METHODS 8
#endif /* DEFS_H */