| /* |
| * EAP peer method: EAP-TLS (RFC 2716) |
| * Copyright (c) 2004-2008, 2012, Jouni Malinen <j@w1.fi> |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| */ |
| |
| #include "includes.h" |
| |
| #include "common.h" |
| #include "crypto/tls.h" |
| #include "eap_i.h" |
| #include "eap_tls_common.h" |
| #include "eap_config.h" |
| |
| |
| static void eap_tls_deinit(struct eap_sm *sm, void *priv); |
| |
| |
| struct eap_tls_data { |
| struct eap_ssl_data ssl; |
| u8 *key_data; |
| void *ssl_ctx; |
| u8 eap_type; |
| }; |
| |
| |
| static void * eap_tls_init(struct eap_sm *sm) |
| { |
| struct eap_tls_data *data; |
| struct eap_peer_config *config = eap_get_config(sm); |
| if (config == NULL || |
| ((sm->init_phase2 ? config->private_key2 : config->private_key) |
| == NULL && |
| (sm->init_phase2 ? config->engine2 : config->engine) == 0)) { |
| wpa_printf(MSG_INFO, "EAP-TLS: Private key not configured"); |
| return NULL; |
| } |
| |
| data = os_zalloc(sizeof(*data)); |
| if (data == NULL) |
| return NULL; |
| |
| data->ssl_ctx = sm->init_phase2 && sm->ssl_ctx2 ? sm->ssl_ctx2 : |
| sm->ssl_ctx; |
| |
| if (eap_peer_tls_ssl_init(sm, &data->ssl, config, EAP_TYPE_TLS)) { |
| wpa_printf(MSG_INFO, "EAP-TLS: Failed to initialize SSL."); |
| eap_tls_deinit(sm, data); |
| if (config->engine) { |
| wpa_printf(MSG_DEBUG, "EAP-TLS: Requesting Smartcard " |
| "PIN"); |
| eap_sm_request_pin(sm); |
| sm->ignore = TRUE; |
| } else if (config->private_key && !config->private_key_passwd) |
| { |
| wpa_printf(MSG_DEBUG, "EAP-TLS: Requesting private " |
| "key passphrase"); |
| eap_sm_request_passphrase(sm); |
| sm->ignore = TRUE; |
| } |
| return NULL; |
| } |
| |
| data->eap_type = EAP_TYPE_TLS; |
| |
| return data; |
| } |
| |
| |
| #ifdef EAP_UNAUTH_TLS |
| static void * eap_unauth_tls_init(struct eap_sm *sm) |
| { |
| struct eap_tls_data *data; |
| struct eap_peer_config *config = eap_get_config(sm); |
| |
| data = os_zalloc(sizeof(*data)); |
| if (data == NULL) |
| return NULL; |
| |
| data->ssl_ctx = sm->init_phase2 && sm->ssl_ctx2 ? sm->ssl_ctx2 : |
| sm->ssl_ctx; |
| |
| if (eap_peer_tls_ssl_init(sm, &data->ssl, config, |
| EAP_UNAUTH_TLS_TYPE)) { |
| wpa_printf(MSG_INFO, "EAP-TLS: Failed to initialize SSL."); |
| eap_tls_deinit(sm, data); |
| return NULL; |
| } |
| |
| data->eap_type = EAP_UNAUTH_TLS_TYPE; |
| |
| return data; |
| } |
| #endif /* EAP_UNAUTH_TLS */ |
| |
| |
| static void eap_tls_deinit(struct eap_sm *sm, void *priv) |
| { |
| struct eap_tls_data *data = priv; |
| if (data == NULL) |
| return; |
| eap_peer_tls_ssl_deinit(sm, &data->ssl); |
| os_free(data->key_data); |
| os_free(data); |
| } |
| |
| |
| static struct wpabuf * eap_tls_failure(struct eap_sm *sm, |
| struct eap_tls_data *data, |
| struct eap_method_ret *ret, int res, |
| struct wpabuf *resp, u8 id) |
| { |
| wpa_printf(MSG_DEBUG, "EAP-TLS: TLS processing failed"); |
| |
| ret->methodState = METHOD_DONE; |
| ret->decision = DECISION_FAIL; |
| |
| if (res == -1) { |
| struct eap_peer_config *config = eap_get_config(sm); |
| if (config) { |
| /* |
| * The TLS handshake failed. So better forget the old |
| * PIN. It may be wrong, we cannot be sure but trying |
| * the wrong one again might block it on the card--so |
| * better ask the user again. |
| */ |
| os_free(config->pin); |
| config->pin = NULL; |
| } |
| } |
| |
| if (resp) { |
| /* |
| * This is likely an alert message, so send it instead of just |
| * ACKing the error. |
| */ |
| return resp; |
| } |
| |
| return eap_peer_tls_build_ack(id, data->eap_type, 0); |
| } |
| |
| |
| static void eap_tls_success(struct eap_sm *sm, struct eap_tls_data *data, |
| struct eap_method_ret *ret) |
| { |
| wpa_printf(MSG_DEBUG, "EAP-TLS: Done"); |
| |
| ret->methodState = METHOD_DONE; |
| ret->decision = DECISION_UNCOND_SUCC; |
| |
| os_free(data->key_data); |
| data->key_data = eap_peer_tls_derive_key(sm, &data->ssl, |
| "client EAP encryption", |
| EAP_TLS_KEY_LEN + |
| EAP_EMSK_LEN); |
| if (data->key_data) { |
| wpa_hexdump_key(MSG_DEBUG, "EAP-TLS: Derived key", |
| data->key_data, EAP_TLS_KEY_LEN); |
| wpa_hexdump_key(MSG_DEBUG, "EAP-TLS: Derived EMSK", |
| data->key_data + EAP_TLS_KEY_LEN, |
| EAP_EMSK_LEN); |
| } else { |
| wpa_printf(MSG_INFO, "EAP-TLS: Failed to derive key"); |
| } |
| } |
| |
| |
| static struct wpabuf * eap_tls_process(struct eap_sm *sm, void *priv, |
| struct eap_method_ret *ret, |
| const struct wpabuf *reqData) |
| { |
| size_t left; |
| int res; |
| struct wpabuf *resp; |
| u8 flags, id; |
| const u8 *pos; |
| struct eap_tls_data *data = priv; |
| |
| pos = eap_peer_tls_process_init(sm, &data->ssl, data->eap_type, ret, |
| reqData, &left, &flags); |
| if (pos == NULL) |
| return NULL; |
| id = eap_get_id(reqData); |
| |
| if (flags & EAP_TLS_FLAGS_START) { |
| wpa_printf(MSG_DEBUG, "EAP-TLS: Start"); |
| left = 0; /* make sure that this frame is empty, even though it |
| * should always be, anyway */ |
| } |
| |
| resp = NULL; |
| res = eap_peer_tls_process_helper(sm, &data->ssl, data->eap_type, 0, |
| id, pos, left, &resp); |
| |
| if (res < 0) { |
| return eap_tls_failure(sm, data, ret, res, resp, id); |
| } |
| |
| if (tls_connection_established(data->ssl_ctx, data->ssl.conn)) |
| eap_tls_success(sm, data, ret); |
| |
| if (res == 1) { |
| wpabuf_free(resp); |
| return eap_peer_tls_build_ack(id, data->eap_type, 0); |
| } |
| |
| return resp; |
| } |
| |
| |
| static Boolean eap_tls_has_reauth_data(struct eap_sm *sm, void *priv) |
| { |
| struct eap_tls_data *data = priv; |
| return tls_connection_established(data->ssl_ctx, data->ssl.conn); |
| } |
| |
| |
| static void eap_tls_deinit_for_reauth(struct eap_sm *sm, void *priv) |
| { |
| } |
| |
| |
| static void * eap_tls_init_for_reauth(struct eap_sm *sm, void *priv) |
| { |
| struct eap_tls_data *data = priv; |
| os_free(data->key_data); |
| data->key_data = NULL; |
| if (eap_peer_tls_reauth_init(sm, &data->ssl)) { |
| os_free(data); |
| return NULL; |
| } |
| return priv; |
| } |
| |
| |
| static int eap_tls_get_status(struct eap_sm *sm, void *priv, char *buf, |
| size_t buflen, int verbose) |
| { |
| struct eap_tls_data *data = priv; |
| return eap_peer_tls_status(sm, &data->ssl, buf, buflen, verbose); |
| } |
| |
| |
| static Boolean eap_tls_isKeyAvailable(struct eap_sm *sm, void *priv) |
| { |
| struct eap_tls_data *data = priv; |
| return data->key_data != NULL; |
| } |
| |
| |
| static u8 * eap_tls_getKey(struct eap_sm *sm, void *priv, size_t *len) |
| { |
| struct eap_tls_data *data = priv; |
| u8 *key; |
| |
| if (data->key_data == NULL) |
| return NULL; |
| |
| key = os_malloc(EAP_TLS_KEY_LEN); |
| if (key == NULL) |
| return NULL; |
| |
| *len = EAP_TLS_KEY_LEN; |
| os_memcpy(key, data->key_data, EAP_TLS_KEY_LEN); |
| |
| return key; |
| } |
| |
| |
| static u8 * eap_tls_get_emsk(struct eap_sm *sm, void *priv, size_t *len) |
| { |
| struct eap_tls_data *data = priv; |
| u8 *key; |
| |
| if (data->key_data == NULL) |
| return NULL; |
| |
| key = os_malloc(EAP_EMSK_LEN); |
| if (key == NULL) |
| return NULL; |
| |
| *len = EAP_EMSK_LEN; |
| os_memcpy(key, data->key_data + EAP_TLS_KEY_LEN, EAP_EMSK_LEN); |
| |
| return key; |
| } |
| |
| |
| int eap_peer_tls_register(void) |
| { |
| struct eap_method *eap; |
| int ret; |
| |
| eap = eap_peer_method_alloc(EAP_PEER_METHOD_INTERFACE_VERSION, |
| EAP_VENDOR_IETF, EAP_TYPE_TLS, "TLS"); |
| if (eap == NULL) |
| return -1; |
| |
| eap->init = eap_tls_init; |
| eap->deinit = eap_tls_deinit; |
| eap->process = eap_tls_process; |
| eap->isKeyAvailable = eap_tls_isKeyAvailable; |
| eap->getKey = eap_tls_getKey; |
| eap->get_status = eap_tls_get_status; |
| eap->has_reauth_data = eap_tls_has_reauth_data; |
| eap->deinit_for_reauth = eap_tls_deinit_for_reauth; |
| eap->init_for_reauth = eap_tls_init_for_reauth; |
| eap->get_emsk = eap_tls_get_emsk; |
| |
| ret = eap_peer_method_register(eap); |
| if (ret) |
| eap_peer_method_free(eap); |
| return ret; |
| } |
| |
| |
| #ifdef EAP_UNAUTH_TLS |
| int eap_peer_unauth_tls_register(void) |
| { |
| struct eap_method *eap; |
| int ret; |
| |
| eap = eap_peer_method_alloc(EAP_PEER_METHOD_INTERFACE_VERSION, |
| EAP_VENDOR_UNAUTH_TLS, |
| EAP_VENDOR_TYPE_UNAUTH_TLS, "UNAUTH-TLS"); |
| if (eap == NULL) |
| return -1; |
| |
| eap->init = eap_unauth_tls_init; |
| eap->deinit = eap_tls_deinit; |
| eap->process = eap_tls_process; |
| eap->isKeyAvailable = eap_tls_isKeyAvailable; |
| eap->getKey = eap_tls_getKey; |
| eap->get_status = eap_tls_get_status; |
| eap->has_reauth_data = eap_tls_has_reauth_data; |
| eap->deinit_for_reauth = eap_tls_deinit_for_reauth; |
| eap->init_for_reauth = eap_tls_init_for_reauth; |
| eap->get_emsk = eap_tls_get_emsk; |
| |
| ret = eap_peer_method_register(eap); |
| if (ret) |
| eap_peer_method_free(eap); |
| return ret; |
| } |
| #endif /* EAP_UNAUTH_TLS */ |