hostapd/defconfig - platform/external/wpa_supplicant_8 - Git at Google

 # Example hostapd build time configuration
 #
 # This file lists the configuration options that are used when building the
 # hostapd binary. All lines starting with # are ignored. Configuration option
 # lines must be commented out complete, if they are not to be included, i.e.,
 # just setting VARIABLE=n is not disabling that variable.
 #
 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
 # be modified from here. In most cass, these lines should use += in order not
 # to override previous values of the variables.

 # Driver interface for Host AP driver
 CONFIG_DRIVER_HOSTAP=y

 # Driver interface for wired authenticator
 #CONFIG_DRIVER_WIRED=y

 # Driver interface for madwifi driver
 #CONFIG_DRIVER_MADWIFI=y
 #CFLAGS += -I../../madwifi # change to the madwifi source directory

 # Driver interface for drivers using the nl80211 kernel interface
 CONFIG_DRIVER_NL80211=y

 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
 #CONFIG_DRIVER_BSD=y
 #CFLAGS += -I/usr/local/include
 #LIBS += -L/usr/local/lib
 #LIBS_p += -L/usr/local/lib
 #LIBS_c += -L/usr/local/lib

 # Driver interface for no driver (e.g., RADIUS server only)
 #CONFIG_DRIVER_NONE=y

 # IEEE 802.11F/IAPP
 CONFIG_IAPP=y

 # WPA2/IEEE 802.11i RSN pre-authentication
 CONFIG_RSN_PREAUTH=y

 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
 CONFIG_PEERKEY=y

 # IEEE 802.11w (management frame protection)
 # This version is an experimental implementation based on IEEE 802.11w/D1.0
 # draft and is subject to change since the standard has not yet been finalized.
 # Driver support is also needed for IEEE 802.11w.
 #CONFIG_IEEE80211W=y

 # Integrated EAP server
 CONFIG_EAP=y

 # EAP-MD5 for the integrated EAP server
 CONFIG_EAP_MD5=y

 # EAP-TLS for the integrated EAP server
 CONFIG_EAP_TLS=y

 # EAP-MSCHAPv2 for the integrated EAP server
 CONFIG_EAP_MSCHAPV2=y

 # EAP-PEAP for the integrated EAP server
 CONFIG_EAP_PEAP=y

 # EAP-GTC for the integrated EAP server
 CONFIG_EAP_GTC=y

 # EAP-TTLS for the integrated EAP server
 CONFIG_EAP_TTLS=y

 # EAP-SIM for the integrated EAP server
 #CONFIG_EAP_SIM=y

 # EAP-AKA for the integrated EAP server
 #CONFIG_EAP_AKA=y

 # EAP-AKA' for the integrated EAP server
 # This requires CONFIG_EAP_AKA to be enabled, too.
 #CONFIG_EAP_AKA_PRIME=y

 # EAP-PAX for the integrated EAP server
 #CONFIG_EAP_PAX=y

 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
 #CONFIG_EAP_PSK=y

 # EAP-pwd for the integrated EAP server (secure authentication with a password)
 #CONFIG_EAP_PWD=y

 # EAP-SAKE for the integrated EAP server
 #CONFIG_EAP_SAKE=y

 # EAP-GPSK for the integrated EAP server
 #CONFIG_EAP_GPSK=y
 # Include support for optional SHA256 cipher suite in EAP-GPSK
 #CONFIG_EAP_GPSK_SHA256=y

 # EAP-FAST for the integrated EAP server
 # Note: Default OpenSSL package does not include support for all the
 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
 # the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
 # to add the needed functions.
 #CONFIG_EAP_FAST=y

 # Wi-Fi Protected Setup (WPS)
 #CONFIG_WPS=y
 # Enable WSC 2.0 support
 #CONFIG_WPS2=y
 # Enable UPnP support for external WPS Registrars
 #CONFIG_WPS_UPNP=y
 # Enable WPS support with NFC config method
 #CONFIG_WPS_NFC=y

 # EAP-IKEv2
 #CONFIG_EAP_IKEV2=y

 # Trusted Network Connect (EAP-TNC)
 #CONFIG_EAP_TNC=y

 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 CONFIG_PKCS12=y

 # RADIUS authentication server. This provides access to the integrated EAP
 # server from external hosts using RADIUS.
 #CONFIG_RADIUS_SERVER=y

 # Build IPv6 support for RADIUS operations
 CONFIG_IPV6=y

 # IEEE Std 802.11r-2008 (Fast BSS Transition)
 #CONFIG_IEEE80211R=y

 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
 # the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
 #CONFIG_DRIVER_RADIUS_ACL=y

 # IEEE 802.11n (High Throughput) support
 #CONFIG_IEEE80211N=y

 # Wireless Network Management (IEEE Std 802.11v-2011)
 # Note: This is experimental and not complete implementation.
 #CONFIG_WNM=y

 # IEEE 802.11ac (Very High Throughput) support
 #CONFIG_IEEE80211AC=y

 # Remove debugging code that is printing out debug messages to stdout.
 # This can be used to reduce the size of the hostapd considerably if debugging
 # code is not needed.
 #CONFIG_NO_STDOUT_DEBUG=y

 # Add support for writing debug log to a file: -f /tmp/hostapd.log
 # Disabled by default.
 #CONFIG_DEBUG_FILE=y

 # Remove support for RADIUS accounting
 #CONFIG_NO_ACCOUNTING=y

 # Remove support for RADIUS
 #CONFIG_NO_RADIUS=y

 # Remove support for VLANs
 #CONFIG_NO_VLAN=y

 # Enable support for fully dynamic VLANs. This enables hostapd to
 # automatically create bridge and VLAN interfaces if necessary.
 #CONFIG_FULL_DYNAMIC_VLAN=y

 # Use netlink-based kernel API for VLAN operations instead of ioctl()
 # Note: This requires libnl 3.1 or newer.
 #CONFIG_VLAN_NETLINK=y

 # Remove support for dumping state into a file on SIGUSR1 signal
 # This can be used to reduce binary size at the cost of disabling a debugging
 # option.
 #CONFIG_NO_DUMP_STATE=y

 # Enable tracing code for developer debugging
 # This tracks use of memory allocations and other registrations and reports
 # incorrect use with a backtrace of call (or allocation) location.
 #CONFIG_WPA_TRACE=y
 # For BSD, comment out these.
 #LIBS += -lexecinfo
 #LIBS_p += -lexecinfo
 #LIBS_c += -lexecinfo

 # Use libbfd to get more details for developer debugging
 # This enables use of libbfd to get more detailed symbols for the backtraces
 # generated by CONFIG_WPA_TRACE=y.
 #CONFIG_WPA_TRACE_BFD=y
 # For BSD, comment out these.
 #LIBS += -lbfd -liberty -lz
 #LIBS_p += -lbfd -liberty -lz
 #LIBS_c += -lbfd -liberty -lz

 # hostapd depends on strong random number generation being available from the
 # operating system. os_get_random() function is used to fetch random data when
 # needed, e.g., for key generation. On Linux and BSD systems, this works by
 # reading /dev/urandom. It should be noted that the OS entropy pool needs to be
 # properly initialized before hostapd is started. This is important especially
 # on embedded devices that do not have a hardware random number generator and
 # may by default start up with minimal entropy available for random number
 # generation.
 #
 # As a safety net, hostapd is by default trying to internally collect
 # additional entropy for generating random data to mix in with the data
 # fetched from the OS. This by itself is not considered to be very strong, but
 # it may help in cases where the system pool is not initialized properly.
 # However, it is very strongly recommended that the system pool is initialized
 # with enough entropy either by using hardware assisted random number
 # generator or by storing state over device reboots.
 #
 # hostapd can be configured to maintain its own entropy store over restarts to
 # enhance random number generation. This is not perfect, but it is much more
 # secure than using the same sequence of random numbers after every reboot.
 # This can be enabled with -e<entropy file> command line option. The specified
 # file needs to be readable and writable by hostapd.
 #
 # If the os_get_random() is known to provide strong random data (e.g., on
 # Linux/BSD, the board in question is known to have reliable source of random
 # data from /dev/urandom), the internal hostapd random pool can be disabled.
 # This will save some in binary size and CPU use. However, this should only be
 # considered for builds that are known to be used on devices that meet the
 # requirements described above.
 #CONFIG_NO_RANDOM_POOL=y

 # Select TLS implementation
 # openssl = OpenSSL (default)
 # gnutls = GnuTLS
 # internal = Internal TLSv1 implementation (experimental)
 # none = Empty template
 #CONFIG_TLS=openssl

 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
 # can be enabled to get a stronger construction of messages when block ciphers
 # are used.
 #CONFIG_TLSV11=y

 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
 # can be enabled to enable use of stronger crypto algorithms.
 #CONFIG_TLSV12=y

 # If CONFIG_TLS=internal is used, additional library and include paths are
 # needed for LibTomMath. Alternatively, an integrated, minimal version of
 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
 # and drawbacks of this option.
 #CONFIG_INTERNAL_LIBTOMMATH=y
 #ifndef CONFIG_INTERNAL_LIBTOMMATH
 #LTM_PATH=/usr/src/libtommath-0.39
 #CFLAGS += -I$(LTM_PATH)
 #LIBS += -L$(LTM_PATH)
 #LIBS_p += -L$(LTM_PATH)
 #endif
 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
 # can be configured to include faster routines for exptmod, sqr, and div to
 # speed up DH and RSA calculation considerably
 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y

 # Interworking (IEEE 802.11u)
 # This can be used to enable functionality to improve interworking with
 # external networks.
 #CONFIG_INTERWORKING=y

 # Hotspot 2.0
 #CONFIG_HS20=y

 # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
 #CONFIG_SQLITE=y
	# Example hostapd build time configuration
	#
	# This file lists the configuration options that are used when building the
	# hostapd binary. All lines starting with # are ignored. Configuration option
	# lines must be commented out complete, if they are not to be included, i.e.,
	# just setting VARIABLE=n is not disabling that variable.
	#
	# This file is included in Makefile, so variables like CFLAGS and LIBS can also
	# be modified from here. In most cass, these lines should use += in order not
	# to override previous values of the variables.

	# Driver interface for Host AP driver
	CONFIG_DRIVER_HOSTAP=y

	# Driver interface for wired authenticator
	#CONFIG_DRIVER_WIRED=y

	# Driver interface for madwifi driver
	#CONFIG_DRIVER_MADWIFI=y
	#CFLAGS += -I../../madwifi # change to the madwifi source directory

	# Driver interface for drivers using the nl80211 kernel interface
	CONFIG_DRIVER_NL80211=y

	# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
	#CONFIG_DRIVER_BSD=y
	#CFLAGS += -I/usr/local/include
	#LIBS += -L/usr/local/lib
	#LIBS_p += -L/usr/local/lib
	#LIBS_c += -L/usr/local/lib

	# Driver interface for no driver (e.g., RADIUS server only)
	#CONFIG_DRIVER_NONE=y

	# IEEE 802.11F/IAPP
	CONFIG_IAPP=y

	# WPA2/IEEE 802.11i RSN pre-authentication
	CONFIG_RSN_PREAUTH=y

	# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
	CONFIG_PEERKEY=y

	# IEEE 802.11w (management frame protection)
	# This version is an experimental implementation based on IEEE 802.11w/D1.0
	# draft and is subject to change since the standard has not yet been finalized.
	# Driver support is also needed for IEEE 802.11w.
	#CONFIG_IEEE80211W=y

	# Integrated EAP server
	CONFIG_EAP=y

	# EAP-MD5 for the integrated EAP server
	CONFIG_EAP_MD5=y

	# EAP-TLS for the integrated EAP server
	CONFIG_EAP_TLS=y

	# EAP-MSCHAPv2 for the integrated EAP server
	CONFIG_EAP_MSCHAPV2=y

	# EAP-PEAP for the integrated EAP server
	CONFIG_EAP_PEAP=y

	# EAP-GTC for the integrated EAP server
	CONFIG_EAP_GTC=y

	# EAP-TTLS for the integrated EAP server
	CONFIG_EAP_TTLS=y

	# EAP-SIM for the integrated EAP server
	#CONFIG_EAP_SIM=y

	# EAP-AKA for the integrated EAP server
	#CONFIG_EAP_AKA=y

	# EAP-AKA' for the integrated EAP server
	# This requires CONFIG_EAP_AKA to be enabled, too.
	#CONFIG_EAP_AKA_PRIME=y

	# EAP-PAX for the integrated EAP server
	#CONFIG_EAP_PAX=y

	# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
	#CONFIG_EAP_PSK=y

	# EAP-pwd for the integrated EAP server (secure authentication with a password)
	#CONFIG_EAP_PWD=y

	# EAP-SAKE for the integrated EAP server
	#CONFIG_EAP_SAKE=y

	# EAP-GPSK for the integrated EAP server
	#CONFIG_EAP_GPSK=y
	# Include support for optional SHA256 cipher suite in EAP-GPSK
	#CONFIG_EAP_GPSK_SHA256=y

	# EAP-FAST for the integrated EAP server
	# Note: Default OpenSSL package does not include support for all the
	# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
	# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
	# to add the needed functions.
	#CONFIG_EAP_FAST=y

	# Wi-Fi Protected Setup (WPS)
	#CONFIG_WPS=y
	# Enable WSC 2.0 support
	#CONFIG_WPS2=y
	# Enable UPnP support for external WPS Registrars
	#CONFIG_WPS_UPNP=y
	# Enable WPS support with NFC config method
	#CONFIG_WPS_NFC=y

	# EAP-IKEv2
	#CONFIG_EAP_IKEV2=y

	# Trusted Network Connect (EAP-TNC)
	#CONFIG_EAP_TNC=y

	# PKCS#12 (PFX) support (used to read private key and certificate file from
	# a file that usually has extension .p12 or .pfx)
	CONFIG_PKCS12=y

	# RADIUS authentication server. This provides access to the integrated EAP
	# server from external hosts using RADIUS.
	#CONFIG_RADIUS_SERVER=y

	# Build IPv6 support for RADIUS operations
	CONFIG_IPV6=y

	# IEEE Std 802.11r-2008 (Fast BSS Transition)
	#CONFIG_IEEE80211R=y

	# Use the hostapd's IEEE 802.11 authentication (ACL), but without
	# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
	#CONFIG_DRIVER_RADIUS_ACL=y

	# IEEE 802.11n (High Throughput) support
	#CONFIG_IEEE80211N=y

	# Wireless Network Management (IEEE Std 802.11v-2011)
	# Note: This is experimental and not complete implementation.
	#CONFIG_WNM=y

	# IEEE 802.11ac (Very High Throughput) support
	#CONFIG_IEEE80211AC=y

	# Remove debugging code that is printing out debug messages to stdout.
	# This can be used to reduce the size of the hostapd considerably if debugging
	# code is not needed.
	#CONFIG_NO_STDOUT_DEBUG=y

	# Add support for writing debug log to a file: -f /tmp/hostapd.log
	# Disabled by default.
	#CONFIG_DEBUG_FILE=y

	# Remove support for RADIUS accounting
	#CONFIG_NO_ACCOUNTING=y

	# Remove support for RADIUS
	#CONFIG_NO_RADIUS=y

	# Remove support for VLANs
	#CONFIG_NO_VLAN=y

	# Enable support for fully dynamic VLANs. This enables hostapd to
	# automatically create bridge and VLAN interfaces if necessary.
	#CONFIG_FULL_DYNAMIC_VLAN=y

	# Use netlink-based kernel API for VLAN operations instead of ioctl()
	# Note: This requires libnl 3.1 or newer.
	#CONFIG_VLAN_NETLINK=y

	# Remove support for dumping state into a file on SIGUSR1 signal
	# This can be used to reduce binary size at the cost of disabling a debugging
	# option.
	#CONFIG_NO_DUMP_STATE=y

	# Enable tracing code for developer debugging
	# This tracks use of memory allocations and other registrations and reports
	# incorrect use with a backtrace of call (or allocation) location.
	#CONFIG_WPA_TRACE=y
	# For BSD, comment out these.
	#LIBS += -lexecinfo
	#LIBS_p += -lexecinfo
	#LIBS_c += -lexecinfo

	# Use libbfd to get more details for developer debugging
	# This enables use of libbfd to get more detailed symbols for the backtraces
	# generated by CONFIG_WPA_TRACE=y.
	#CONFIG_WPA_TRACE_BFD=y
	# For BSD, comment out these.
	#LIBS += -lbfd -liberty -lz
	#LIBS_p += -lbfd -liberty -lz
	#LIBS_c += -lbfd -liberty -lz

	# hostapd depends on strong random number generation being available from the
	# operating system. os_get_random() function is used to fetch random data when
	# needed, e.g., for key generation. On Linux and BSD systems, this works by
	# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
	# properly initialized before hostapd is started. This is important especially
	# on embedded devices that do not have a hardware random number generator and
	# may by default start up with minimal entropy available for random number
	# generation.
	#
	# As a safety net, hostapd is by default trying to internally collect
	# additional entropy for generating random data to mix in with the data
	# fetched from the OS. This by itself is not considered to be very strong, but
	# it may help in cases where the system pool is not initialized properly.
	# However, it is very strongly recommended that the system pool is initialized
	# with enough entropy either by using hardware assisted random number
	# generator or by storing state over device reboots.
	#
	# hostapd can be configured to maintain its own entropy store over restarts to
	# enhance random number generation. This is not perfect, but it is much more
	# secure than using the same sequence of random numbers after every reboot.
	# This can be enabled with -e<entropy file> command line option. The specified
	# file needs to be readable and writable by hostapd.
	#
	# If the os_get_random() is known to provide strong random data (e.g., on
	# Linux/BSD, the board in question is known to have reliable source of random
	# data from /dev/urandom), the internal hostapd random pool can be disabled.
	# This will save some in binary size and CPU use. However, this should only be
	# considered for builds that are known to be used on devices that meet the
	# requirements described above.
	#CONFIG_NO_RANDOM_POOL=y

	# Select TLS implementation
	# openssl = OpenSSL (default)
	# gnutls = GnuTLS
	# internal = Internal TLSv1 implementation (experimental)
	# none = Empty template
	#CONFIG_TLS=openssl

	# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
	# can be enabled to get a stronger construction of messages when block ciphers
	# are used.
	#CONFIG_TLSV11=y

	# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
	# can be enabled to enable use of stronger crypto algorithms.
	#CONFIG_TLSV12=y

	# If CONFIG_TLS=internal is used, additional library and include paths are
	# needed for LibTomMath. Alternatively, an integrated, minimal version of
	# LibTomMath can be used. See beginning of libtommath.c for details on benefits
	# and drawbacks of this option.
	#CONFIG_INTERNAL_LIBTOMMATH=y
	#ifndef CONFIG_INTERNAL_LIBTOMMATH
	#LTM_PATH=/usr/src/libtommath-0.39
	#CFLAGS += -I$(LTM_PATH)
	#LIBS += -L$(LTM_PATH)
	#LIBS_p += -L$(LTM_PATH)
	#endif
	# At the cost of about 4 kB of additional binary size, the internal LibTomMath
	# can be configured to include faster routines for exptmod, sqr, and div to
	# speed up DH and RSA calculation considerably
	#CONFIG_INTERNAL_LIBTOMMATH_FAST=y

	# Interworking (IEEE 802.11u)
	# This can be used to enable functionality to improve interworking with
	# external networks.
	#CONFIG_INTERWORKING=y

	# Hotspot 2.0
	#CONFIG_HS20=y

	# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
	#CONFIG_SQLITE=y