| /* |
| * gzlog.c |
| * Copyright (C) 2004 Mark Adler |
| * For conditions of distribution and use, see copyright notice in gzlog.h |
| * version 1.0, 26 Nov 2004 |
| * |
| */ |
| |
| #include <string.h> /* memcmp() */ |
| #include <stdlib.h> /* malloc(), free(), NULL */ |
| #include <sys/types.h> /* size_t, off_t */ |
| #include <unistd.h> /* read(), close(), sleep(), ftruncate(), */ |
| /* lseek() */ |
| #include <fcntl.h> /* open() */ |
| #include <sys/file.h> /* flock() */ |
| #include "zlib.h" /* deflateInit2(), deflate(), deflateEnd() */ |
| |
| #include "gzlog.h" /* interface */ |
| #define local static |
| |
| /* log object structure */ |
| typedef struct { |
| int id; /* object identifier */ |
| int fd; /* log file descriptor */ |
| off_t extra; /* offset of extra "ap" subfield */ |
| off_t mark_off; /* offset of marked data */ |
| off_t last_off; /* offset of last block */ |
| unsigned long crc; /* uncompressed crc */ |
| unsigned long len; /* uncompressed length (modulo 2^32) */ |
| unsigned stored; /* length of current stored block */ |
| } gz_log; |
| |
| #define GZLOGID 19334 /* gz_log object identifier */ |
| |
| #define LOCK_RETRY 1 /* retry lock once a second */ |
| #define LOCK_PATIENCE 1200 /* try about twenty minutes before forcing */ |
| |
| /* acquire a lock on a file */ |
| local int lock(int fd) |
| { |
| int patience; |
| |
| /* try to lock every LOCK_RETRY seconds for LOCK_PATIENCE seconds */ |
| patience = LOCK_PATIENCE; |
| do { |
| if (flock(fd, LOCK_EX + LOCK_NB) == 0) |
| return 0; |
| (void)sleep(LOCK_RETRY); |
| patience -= LOCK_RETRY; |
| } while (patience > 0); |
| |
| /* we've run out of patience -- give up */ |
| return -1; |
| } |
| |
| /* release lock */ |
| local void unlock(int fd) |
| { |
| (void)flock(fd, LOCK_UN); |
| } |
| |
| /* release a log object */ |
| local void log_clean(gz_log *log) |
| { |
| unlock(log->fd); |
| (void)close(log->fd); |
| free(log); |
| } |
| |
| /* read an unsigned long from a byte buffer little-endian */ |
| local unsigned long make_ulg(unsigned char *buf) |
| { |
| int n; |
| unsigned long val; |
| |
| val = (unsigned long)(*buf++); |
| for (n = 8; n < 32; n += 8) |
| val += (unsigned long)(*buf++) << n; |
| return val; |
| } |
| |
| /* read an off_t from a byte buffer little-endian */ |
| local off_t make_off(unsigned char *buf) |
| { |
| int n; |
| off_t val; |
| |
| val = (off_t)(*buf++); |
| for (n = 8; n < 64; n += 8) |
| val += (off_t)(*buf++) << n; |
| return val; |
| } |
| |
| /* write an unsigned long little-endian to byte buffer */ |
| local void dice_ulg(unsigned long val, unsigned char *buf) |
| { |
| int n; |
| |
| for (n = 0; n < 4; n++) { |
| *buf++ = val & 0xff; |
| val >>= 8; |
| } |
| } |
| |
| /* write an off_t little-endian to byte buffer */ |
| local void dice_off(off_t val, unsigned char *buf) |
| { |
| int n; |
| |
| for (n = 0; n < 8; n++) { |
| *buf++ = val & 0xff; |
| val >>= 8; |
| } |
| } |
| |
| /* initial, empty gzip file for appending */ |
| local char empty_gz[] = { |
| 0x1f, 0x8b, /* magic gzip id */ |
| 8, /* compression method is deflate */ |
| 4, /* there is an extra field */ |
| 0, 0, 0, 0, /* no modification time provided */ |
| 0, 0xff, /* no extra flags, no OS */ |
| 20, 0, 'a', 'p', 16, 0, /* extra field with "ap" subfield */ |
| 32, 0, 0, 0, 0, 0, 0, 0, /* offset of uncompressed data */ |
| 32, 0, 0, 0, 0, 0, 0, 0, /* offset of last block */ |
| 1, 0, 0, 0xff, 0xff, /* empty stored block (last) */ |
| 0, 0, 0, 0, /* crc */ |
| 0, 0, 0, 0 /* uncompressed length */ |
| }; |
| |
| /* initialize a log object with locking */ |
| void *gzlog_open(char *path) |
| { |
| unsigned xlen; |
| unsigned char temp[20]; |
| unsigned sub_len; |
| int good; |
| gz_log *log; |
| |
| /* allocate log structure */ |
| log = malloc(sizeof(gz_log)); |
| if (log == NULL) |
| return NULL; |
| log->id = GZLOGID; |
| |
| /* open file, creating it if necessary, and locking it */ |
| log->fd = open(path, O_RDWR | O_CREAT, 0600); |
| if (log->fd < 0) { |
| free(log); |
| return NULL; |
| } |
| if (lock(log->fd)) { |
| close(log->fd); |
| free(log); |
| return NULL; |
| } |
| |
| /* if file is empty, write new gzip stream */ |
| if (lseek(log->fd, 0, SEEK_END) == 0) { |
| if (write(log->fd, empty_gz, sizeof(empty_gz)) != sizeof(empty_gz)) { |
| log_clean(log); |
| return NULL; |
| } |
| } |
| |
| /* check gzip header */ |
| (void)lseek(log->fd, 0, SEEK_SET); |
| if (read(log->fd, temp, 12) != 12 || temp[0] != 0x1f || |
| temp[1] != 0x8b || temp[2] != 8 || (temp[3] & 4) == 0) { |
| log_clean(log); |
| return NULL; |
| } |
| |
| /* process extra field to find "ap" sub-field */ |
| xlen = temp[10] + (temp[11] << 8); |
| good = 0; |
| while (xlen) { |
| if (xlen < 4 || read(log->fd, temp, 4) != 4) |
| break; |
| sub_len = temp[2]; |
| sub_len += temp[3] << 8; |
| xlen -= 4; |
| if (memcmp(temp, "ap", 2) == 0 && sub_len == 16) { |
| good = 1; |
| break; |
| } |
| if (xlen < sub_len) |
| break; |
| (void)lseek(log->fd, sub_len, SEEK_CUR); |
| xlen -= sub_len; |
| } |
| if (!good) { |
| log_clean(log); |
| return NULL; |
| } |
| |
| /* read in "ap" sub-field */ |
| log->extra = lseek(log->fd, 0, SEEK_CUR); |
| if (read(log->fd, temp, 16) != 16) { |
| log_clean(log); |
| return NULL; |
| } |
| log->mark_off = make_off(temp); |
| log->last_off = make_off(temp + 8); |
| |
| /* get crc, length of gzip file */ |
| (void)lseek(log->fd, log->last_off, SEEK_SET); |
| if (read(log->fd, temp, 13) != 13 || |
| memcmp(temp, "\001\000\000\377\377", 5) != 0) { |
| log_clean(log); |
| return NULL; |
| } |
| log->crc = make_ulg(temp + 5); |
| log->len = make_ulg(temp + 9); |
| |
| /* set up to write over empty last block */ |
| (void)lseek(log->fd, log->last_off + 5, SEEK_SET); |
| log->stored = 0; |
| return (void *)log; |
| } |
| |
| /* maximum amount to put in a stored block before starting a new one */ |
| #define MAX_BLOCK 16384 |
| |
| /* write a block to a log object */ |
| int gzlog_write(void *obj, char *data, size_t len) |
| { |
| size_t some; |
| unsigned char temp[5]; |
| gz_log *log; |
| |
| /* check object */ |
| log = (gz_log *)obj; |
| if (log == NULL || log->id != GZLOGID) |
| return 1; |
| |
| /* write stored blocks until all of the input is written */ |
| do { |
| some = MAX_BLOCK - log->stored; |
| if (some > len) |
| some = len; |
| if (write(log->fd, data, some) != some) |
| return 1; |
| log->crc = crc32(log->crc, data, some); |
| log->len += some; |
| len -= some; |
| data += some; |
| log->stored += some; |
| |
| /* if the stored block is full, end it and start another */ |
| if (log->stored == MAX_BLOCK) { |
| (void)lseek(log->fd, log->last_off, SEEK_SET); |
| temp[0] = 0; |
| dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16), |
| temp + 1); |
| if (write(log->fd, temp, 5) != 5) |
| return 1; |
| log->last_off = lseek(log->fd, log->stored, SEEK_CUR); |
| (void)lseek(log->fd, 5, SEEK_CUR); |
| log->stored = 0; |
| } |
| } while (len); |
| return 0; |
| } |
| |
| /* recompress the remaining stored deflate data in place */ |
| local int recomp(gz_log *log) |
| { |
| z_stream strm; |
| size_t len, max; |
| unsigned char *in; |
| unsigned char *out; |
| unsigned char temp[16]; |
| |
| /* allocate space and read it all in (it's around 1 MB) */ |
| len = log->last_off - log->mark_off; |
| max = len + (len >> 12) + (len >> 14) + 11; |
| out = malloc(max); |
| if (out == NULL) |
| return 1; |
| in = malloc(len); |
| if (in == NULL) { |
| free(out); |
| return 1; |
| } |
| (void)lseek(log->fd, log->mark_off, SEEK_SET); |
| if (read(log->fd, in, len) != len) { |
| free(in); |
| free(out); |
| return 1; |
| } |
| |
| /* recompress in memory, decoding stored data as we go */ |
| /* note: this assumes that unsigned is four bytes or more */ |
| /* consider not making that assumption */ |
| strm.zalloc = Z_NULL; |
| strm.zfree = Z_NULL; |
| strm.opaque = Z_NULL; |
| if (deflateInit2(&strm, Z_BEST_COMPRESSION, Z_DEFLATED, -15, 8, |
| Z_DEFAULT_STRATEGY) != Z_OK) { |
| free(in); |
| free(out); |
| return 1; |
| } |
| strm.next_in = in; |
| strm.avail_out = max; |
| strm.next_out = out; |
| while (len >= 5) { |
| if (strm.next_in[0] != 0) |
| break; |
| strm.avail_in = strm.next_in[1] + (strm.next_in[2] << 8); |
| strm.next_in += 5; |
| len -= 5; |
| if (strm.avail_in != 0) { |
| if (len < strm.avail_in) |
| break; |
| len -= strm.avail_in; |
| (void)deflate(&strm, Z_NO_FLUSH); |
| if (strm.avail_in != 0 || strm.avail_out == 0) |
| break; |
| } |
| } |
| (void)deflate(&strm, Z_SYNC_FLUSH); |
| (void)deflateEnd(&strm); |
| free(in); |
| if (len != 0 || strm.avail_out == 0) { |
| free(out); |
| return 1; |
| } |
| |
| /* overwrite stored data with compressed data */ |
| (void)lseek(log->fd, log->mark_off, SEEK_SET); |
| len = max - strm.avail_out; |
| if (write(log->fd, out, len) != len) { |
| free(out); |
| return 1; |
| } |
| free(out); |
| |
| /* write last empty block, crc, and length */ |
| log->mark_off = log->last_off = lseek(log->fd, 0, SEEK_CUR); |
| temp[0] = 1; |
| dice_ulg(0xffffL << 16, temp + 1); |
| dice_ulg(log->crc, temp + 5); |
| dice_ulg(log->len, temp + 9); |
| if (write(log->fd, temp, 13) != 13) |
| return 1; |
| |
| /* truncate file to discard remaining stored data and old trailer */ |
| ftruncate(log->fd, lseek(log->fd, 0, SEEK_CUR)); |
| |
| /* update extra field to point to new last empty block */ |
| (void)lseek(log->fd, log->extra, SEEK_SET); |
| dice_off(log->mark_off, temp); |
| dice_off(log->last_off, temp + 8); |
| if (write(log->fd, temp, 16) != 16) |
| return 1; |
| return 0; |
| } |
| |
| /* maximum accumulation of stored blocks before compressing */ |
| #define MAX_STORED 1048576 |
| |
| /* close log object */ |
| int gzlog_close(void *obj) |
| { |
| unsigned char temp[8]; |
| gz_log *log; |
| |
| /* check object */ |
| log = (gz_log *)obj; |
| if (log == NULL || log->id != GZLOGID) |
| return 1; |
| |
| /* go to start of most recent block being written */ |
| (void)lseek(log->fd, log->last_off, SEEK_SET); |
| |
| /* if some stuff was put there, update block */ |
| if (log->stored) { |
| temp[0] = 0; |
| dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16), |
| temp + 1); |
| if (write(log->fd, temp, 5) != 5) |
| return 1; |
| log->last_off = lseek(log->fd, log->stored, SEEK_CUR); |
| } |
| |
| /* write last block (empty) */ |
| if (write(log->fd, "\001\000\000\377\377", 5) != 5) |
| return 1; |
| |
| /* write updated crc and uncompressed length */ |
| dice_ulg(log->crc, temp); |
| dice_ulg(log->len, temp + 4); |
| if (write(log->fd, temp, 8) != 8) |
| return 1; |
| |
| /* put offset of that last block in gzip extra block */ |
| (void)lseek(log->fd, log->extra + 8, SEEK_SET); |
| dice_off(log->last_off, temp); |
| if (write(log->fd, temp, 8) != 8) |
| return 1; |
| |
| /* if more than 1 MB stored, then time to compress it */ |
| if (log->last_off - log->mark_off > MAX_STORED) { |
| if (recomp(log)) |
| return 1; |
| } |
| |
| /* unlock and close file */ |
| log_clean(log); |
| return 0; |
| } |