| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // <IMPORTANT_WARNING> |
| // Design rules for threadLoop() are given in the comments at section "Fast mixer thread" of |
| // StateQueue.h. In particular, avoid library and system calls except at well-known points. |
| // The design rules are only for threadLoop(), and don't apply to FastMixerDumpState methods. |
| // </IMPORTANT_WARNING> |
| |
| #define LOG_TAG "FastMixer" |
| //#define LOG_NDEBUG 0 |
| |
| #define ATRACE_TAG ATRACE_TAG_AUDIO |
| |
| #include <sys/atomics.h> |
| #include <time.h> |
| #include <utils/Log.h> |
| #include <utils/Trace.h> |
| #include <system/audio.h> |
| #ifdef FAST_MIXER_STATISTICS |
| #include <cpustats/CentralTendencyStatistics.h> |
| #ifdef CPU_FREQUENCY_STATISTICS |
| #include <cpustats/ThreadCpuUsage.h> |
| #endif |
| #endif |
| #include "AudioMixer.h" |
| #include "FastMixer.h" |
| |
| #define FAST_HOT_IDLE_NS 1000000L // 1 ms: time to sleep while hot idling |
| #define FAST_DEFAULT_NS 999999999L // ~1 sec: default time to sleep |
| #define MIN_WARMUP_CYCLES 2 // minimum number of loop cycles to wait for warmup |
| #define MAX_WARMUP_CYCLES 10 // maximum number of loop cycles to wait for warmup |
| |
| namespace android { |
| |
| // Fast mixer thread |
| bool FastMixer::threadLoop() |
| { |
| static const FastMixerState initial; |
| const FastMixerState *previous = &initial, *current = &initial; |
| FastMixerState preIdle; // copy of state before we went into idle |
| struct timespec oldTs = {0, 0}; |
| bool oldTsValid = false; |
| long slopNs = 0; // accumulated time we've woken up too early (> 0) or too late (< 0) |
| long sleepNs = -1; // -1: busy wait, 0: sched_yield, > 0: nanosleep |
| int fastTrackNames[FastMixerState::kMaxFastTracks]; // handles used by mixer to identify tracks |
| int generations[FastMixerState::kMaxFastTracks]; // last observed mFastTracks[i].mGeneration |
| unsigned i; |
| for (i = 0; i < FastMixerState::kMaxFastTracks; ++i) { |
| fastTrackNames[i] = -1; |
| generations[i] = 0; |
| } |
| NBAIO_Sink *outputSink = NULL; |
| int outputSinkGen = 0; |
| AudioMixer* mixer = NULL; |
| short *mixBuffer = NULL; |
| enum {UNDEFINED, MIXED, ZEROED} mixBufferState = UNDEFINED; |
| NBAIO_Format format = Format_Invalid; |
| unsigned sampleRate = 0; |
| int fastTracksGen = 0; |
| long periodNs = 0; // expected period; the time required to render one mix buffer |
| long underrunNs = 0; // underrun likely when write cycle is greater than this value |
| long overrunNs = 0; // overrun likely when write cycle is less than this value |
| long forceNs = 0; // if overrun detected, force the write cycle to take this much time |
| long warmupNs = 0; // warmup complete when write cycle is greater than to this value |
| FastMixerDumpState dummyDumpState, *dumpState = &dummyDumpState; |
| bool ignoreNextOverrun = true; // used to ignore initial overrun and first after an underrun |
| #ifdef FAST_MIXER_STATISTICS |
| struct timespec oldLoad = {0, 0}; // previous value of clock_gettime(CLOCK_THREAD_CPUTIME_ID) |
| bool oldLoadValid = false; // whether oldLoad is valid |
| uint32_t bounds = 0; |
| bool full = false; // whether we have collected at least kSamplingN samples |
| #ifdef CPU_FREQUENCY_STATISTICS |
| ThreadCpuUsage tcu; // for reading the current CPU clock frequency in kHz |
| #endif |
| #endif |
| unsigned coldGen = 0; // last observed mColdGen |
| bool isWarm = false; // true means ready to mix, false means wait for warmup before mixing |
| struct timespec measuredWarmupTs = {0, 0}; // how long did it take for warmup to complete |
| uint32_t warmupCycles = 0; // counter of number of loop cycles required to warmup |
| NBAIO_Sink* teeSink = NULL; // if non-NULL, then duplicate write() to this non-blocking sink |
| NBLog::Writer dummyLogWriter, *logWriter = &dummyLogWriter; |
| |
| for (;;) { |
| |
| // either nanosleep, sched_yield, or busy wait |
| if (sleepNs >= 0) { |
| if (sleepNs > 0) { |
| ALOG_ASSERT(sleepNs < 1000000000); |
| const struct timespec req = {0, sleepNs}; |
| nanosleep(&req, NULL); |
| } else { |
| sched_yield(); |
| } |
| } |
| // default to long sleep for next cycle |
| sleepNs = FAST_DEFAULT_NS; |
| |
| // poll for state change |
| const FastMixerState *next = mSQ.poll(); |
| if (next == NULL) { |
| // continue to use the default initial state until a real state is available |
| ALOG_ASSERT(current == &initial && previous == &initial); |
| next = current; |
| } |
| |
| FastMixerState::Command command = next->mCommand; |
| if (next != current) { |
| |
| // As soon as possible of learning of a new dump area, start using it |
| dumpState = next->mDumpState != NULL ? next->mDumpState : &dummyDumpState; |
| teeSink = next->mTeeSink; |
| logWriter = next->mNBLogWriter != NULL ? next->mNBLogWriter : &dummyLogWriter; |
| if (mixer != NULL) { |
| mixer->setLog(logWriter); |
| } |
| |
| // We want to always have a valid reference to the previous (non-idle) state. |
| // However, the state queue only guarantees access to current and previous states. |
| // So when there is a transition from a non-idle state into an idle state, we make a |
| // copy of the last known non-idle state so it is still available on return from idle. |
| // The possible transitions are: |
| // non-idle -> non-idle update previous from current in-place |
| // non-idle -> idle update previous from copy of current |
| // idle -> idle don't update previous |
| // idle -> non-idle don't update previous |
| if (!(current->mCommand & FastMixerState::IDLE)) { |
| if (command & FastMixerState::IDLE) { |
| preIdle = *current; |
| current = &preIdle; |
| oldTsValid = false; |
| oldLoadValid = false; |
| ignoreNextOverrun = true; |
| } |
| previous = current; |
| } |
| current = next; |
| } |
| #if !LOG_NDEBUG |
| next = NULL; // not referenced again |
| #endif |
| |
| dumpState->mCommand = command; |
| |
| switch (command) { |
| case FastMixerState::INITIAL: |
| case FastMixerState::HOT_IDLE: |
| sleepNs = FAST_HOT_IDLE_NS; |
| continue; |
| case FastMixerState::COLD_IDLE: |
| // only perform a cold idle command once |
| // FIXME consider checking previous state and only perform if previous != COLD_IDLE |
| if (current->mColdGen != coldGen) { |
| int32_t *coldFutexAddr = current->mColdFutexAddr; |
| ALOG_ASSERT(coldFutexAddr != NULL); |
| int32_t old = android_atomic_dec(coldFutexAddr); |
| if (old <= 0) { |
| __futex_syscall4(coldFutexAddr, FUTEX_WAIT_PRIVATE, old - 1, NULL); |
| } |
| // This may be overly conservative; there could be times that the normal mixer |
| // requests such a brief cold idle that it doesn't require resetting this flag. |
| isWarm = false; |
| measuredWarmupTs.tv_sec = 0; |
| measuredWarmupTs.tv_nsec = 0; |
| warmupCycles = 0; |
| sleepNs = -1; |
| coldGen = current->mColdGen; |
| bounds = 0; |
| full = false; |
| oldTsValid = !clock_gettime(CLOCK_MONOTONIC, &oldTs); |
| } else { |
| sleepNs = FAST_HOT_IDLE_NS; |
| } |
| continue; |
| case FastMixerState::EXIT: |
| delete mixer; |
| delete[] mixBuffer; |
| return false; |
| case FastMixerState::MIX: |
| case FastMixerState::WRITE: |
| case FastMixerState::MIX_WRITE: |
| break; |
| default: |
| LOG_FATAL("bad command %d", command); |
| } |
| |
| // there is a non-idle state available to us; did the state change? |
| size_t frameCount = current->mFrameCount; |
| if (current != previous) { |
| |
| // handle state change here, but since we want to diff the state, |
| // we're prepared for previous == &initial the first time through |
| unsigned previousTrackMask; |
| |
| // check for change in output HAL configuration |
| NBAIO_Format previousFormat = format; |
| if (current->mOutputSinkGen != outputSinkGen) { |
| outputSink = current->mOutputSink; |
| outputSinkGen = current->mOutputSinkGen; |
| if (outputSink == NULL) { |
| format = Format_Invalid; |
| sampleRate = 0; |
| } else { |
| format = outputSink->format(); |
| sampleRate = Format_sampleRate(format); |
| ALOG_ASSERT(Format_channelCount(format) == 2); |
| } |
| dumpState->mSampleRate = sampleRate; |
| } |
| |
| if ((format != previousFormat) || (frameCount != previous->mFrameCount)) { |
| // FIXME to avoid priority inversion, don't delete here |
| delete mixer; |
| mixer = NULL; |
| delete[] mixBuffer; |
| mixBuffer = NULL; |
| if (frameCount > 0 && sampleRate > 0) { |
| // FIXME new may block for unbounded time at internal mutex of the heap |
| // implementation; it would be better to have normal mixer allocate for us |
| // to avoid blocking here and to prevent possible priority inversion |
| mixer = new AudioMixer(frameCount, sampleRate, FastMixerState::kMaxFastTracks); |
| mixBuffer = new short[frameCount * 2]; |
| periodNs = (frameCount * 1000000000LL) / sampleRate; // 1.00 |
| underrunNs = (frameCount * 1750000000LL) / sampleRate; // 1.75 |
| overrunNs = (frameCount * 500000000LL) / sampleRate; // 0.50 |
| forceNs = (frameCount * 950000000LL) / sampleRate; // 0.95 |
| warmupNs = (frameCount * 500000000LL) / sampleRate; // 0.50 |
| } else { |
| periodNs = 0; |
| underrunNs = 0; |
| overrunNs = 0; |
| forceNs = 0; |
| warmupNs = 0; |
| } |
| mixBufferState = UNDEFINED; |
| #if !LOG_NDEBUG |
| for (i = 0; i < FastMixerState::kMaxFastTracks; ++i) { |
| fastTrackNames[i] = -1; |
| } |
| #endif |
| // we need to reconfigure all active tracks |
| previousTrackMask = 0; |
| fastTracksGen = current->mFastTracksGen - 1; |
| dumpState->mFrameCount = frameCount; |
| } else { |
| previousTrackMask = previous->mTrackMask; |
| } |
| |
| // check for change in active track set |
| unsigned currentTrackMask = current->mTrackMask; |
| dumpState->mTrackMask = currentTrackMask; |
| if (current->mFastTracksGen != fastTracksGen) { |
| ALOG_ASSERT(mixBuffer != NULL); |
| int name; |
| |
| // process removed tracks first to avoid running out of track names |
| unsigned removedTracks = previousTrackMask & ~currentTrackMask; |
| while (removedTracks != 0) { |
| i = __builtin_ctz(removedTracks); |
| removedTracks &= ~(1 << i); |
| const FastTrack* fastTrack = ¤t->mFastTracks[i]; |
| ALOG_ASSERT(fastTrack->mBufferProvider == NULL); |
| if (mixer != NULL) { |
| name = fastTrackNames[i]; |
| ALOG_ASSERT(name >= 0); |
| mixer->deleteTrackName(name); |
| } |
| #if !LOG_NDEBUG |
| fastTrackNames[i] = -1; |
| #endif |
| // don't reset track dump state, since other side is ignoring it |
| generations[i] = fastTrack->mGeneration; |
| } |
| |
| // now process added tracks |
| unsigned addedTracks = currentTrackMask & ~previousTrackMask; |
| while (addedTracks != 0) { |
| i = __builtin_ctz(addedTracks); |
| addedTracks &= ~(1 << i); |
| const FastTrack* fastTrack = ¤t->mFastTracks[i]; |
| AudioBufferProvider *bufferProvider = fastTrack->mBufferProvider; |
| ALOG_ASSERT(bufferProvider != NULL && fastTrackNames[i] == -1); |
| if (mixer != NULL) { |
| // calling getTrackName with default channel mask and a random invalid |
| // sessionId (no effects here) |
| name = mixer->getTrackName(AUDIO_CHANNEL_OUT_STEREO, -555); |
| ALOG_ASSERT(name >= 0); |
| fastTrackNames[i] = name; |
| mixer->setBufferProvider(name, bufferProvider); |
| mixer->setParameter(name, AudioMixer::TRACK, AudioMixer::MAIN_BUFFER, |
| (void *) mixBuffer); |
| // newly allocated track names default to full scale volume |
| if (fastTrack->mSampleRate != 0 && fastTrack->mSampleRate != sampleRate) { |
| mixer->setParameter(name, AudioMixer::RESAMPLE, |
| AudioMixer::SAMPLE_RATE, (void*) fastTrack->mSampleRate); |
| } |
| mixer->setParameter(name, AudioMixer::TRACK, AudioMixer::CHANNEL_MASK, |
| (void *) fastTrack->mChannelMask); |
| mixer->enable(name); |
| } |
| generations[i] = fastTrack->mGeneration; |
| } |
| |
| // finally process (potentially) modified tracks; these use the same slot |
| // but may have a different buffer provider or volume provider |
| unsigned modifiedTracks = currentTrackMask & previousTrackMask; |
| while (modifiedTracks != 0) { |
| i = __builtin_ctz(modifiedTracks); |
| modifiedTracks &= ~(1 << i); |
| const FastTrack* fastTrack = ¤t->mFastTracks[i]; |
| if (fastTrack->mGeneration != generations[i]) { |
| // this track was actually modified |
| AudioBufferProvider *bufferProvider = fastTrack->mBufferProvider; |
| ALOG_ASSERT(bufferProvider != NULL); |
| if (mixer != NULL) { |
| name = fastTrackNames[i]; |
| ALOG_ASSERT(name >= 0); |
| mixer->setBufferProvider(name, bufferProvider); |
| if (fastTrack->mVolumeProvider == NULL) { |
| mixer->setParameter(name, AudioMixer::VOLUME, AudioMixer::VOLUME0, |
| (void *)0x1000); |
| mixer->setParameter(name, AudioMixer::VOLUME, AudioMixer::VOLUME1, |
| (void *)0x1000); |
| } |
| if (fastTrack->mSampleRate != 0 && |
| fastTrack->mSampleRate != sampleRate) { |
| mixer->setParameter(name, AudioMixer::RESAMPLE, |
| AudioMixer::SAMPLE_RATE, (void*) fastTrack->mSampleRate); |
| } else { |
| mixer->setParameter(name, AudioMixer::RESAMPLE, |
| AudioMixer::REMOVE, NULL); |
| } |
| mixer->setParameter(name, AudioMixer::TRACK, AudioMixer::CHANNEL_MASK, |
| (void *) fastTrack->mChannelMask); |
| // already enabled |
| } |
| generations[i] = fastTrack->mGeneration; |
| } |
| } |
| |
| fastTracksGen = current->mFastTracksGen; |
| |
| dumpState->mNumTracks = popcount(currentTrackMask); |
| } |
| |
| #if 1 // FIXME shouldn't need this |
| // only process state change once |
| previous = current; |
| #endif |
| } |
| |
| // do work using current state here |
| if ((command & FastMixerState::MIX) && (mixer != NULL) && isWarm) { |
| ALOG_ASSERT(mixBuffer != NULL); |
| // for each track, update volume and check for underrun |
| unsigned currentTrackMask = current->mTrackMask; |
| while (currentTrackMask != 0) { |
| i = __builtin_ctz(currentTrackMask); |
| currentTrackMask &= ~(1 << i); |
| const FastTrack* fastTrack = ¤t->mFastTracks[i]; |
| int name = fastTrackNames[i]; |
| ALOG_ASSERT(name >= 0); |
| if (fastTrack->mVolumeProvider != NULL) { |
| uint32_t vlr = fastTrack->mVolumeProvider->getVolumeLR(); |
| mixer->setParameter(name, AudioMixer::VOLUME, AudioMixer::VOLUME0, |
| (void *)(vlr & 0xFFFF)); |
| mixer->setParameter(name, AudioMixer::VOLUME, AudioMixer::VOLUME1, |
| (void *)(vlr >> 16)); |
| } |
| // FIXME The current implementation of framesReady() for fast tracks |
| // takes a tryLock, which can block |
| // up to 1 ms. If enough active tracks all blocked in sequence, this would result |
| // in the overall fast mix cycle being delayed. Should use a non-blocking FIFO. |
| size_t framesReady = fastTrack->mBufferProvider->framesReady(); |
| if (ATRACE_ENABLED()) { |
| // I wish we had formatted trace names |
| char traceName[16]; |
| strcpy(traceName, "fRdy"); |
| traceName[4] = i + (i < 10 ? '0' : 'A' - 10); |
| traceName[5] = '\0'; |
| ATRACE_INT(traceName, framesReady); |
| } |
| FastTrackDump *ftDump = &dumpState->mTracks[i]; |
| FastTrackUnderruns underruns = ftDump->mUnderruns; |
| if (framesReady < frameCount) { |
| if (framesReady == 0) { |
| underruns.mBitFields.mEmpty++; |
| underruns.mBitFields.mMostRecent = UNDERRUN_EMPTY; |
| mixer->disable(name); |
| } else { |
| // allow mixing partial buffer |
| underruns.mBitFields.mPartial++; |
| underruns.mBitFields.mMostRecent = UNDERRUN_PARTIAL; |
| mixer->enable(name); |
| } |
| } else { |
| underruns.mBitFields.mFull++; |
| underruns.mBitFields.mMostRecent = UNDERRUN_FULL; |
| mixer->enable(name); |
| } |
| ftDump->mUnderruns = underruns; |
| ftDump->mFramesReady = framesReady; |
| } |
| |
| int64_t pts; |
| if (outputSink == NULL || (OK != outputSink->getNextWriteTimestamp(&pts))) |
| pts = AudioBufferProvider::kInvalidPTS; |
| |
| // process() is CPU-bound |
| mixer->process(pts); |
| mixBufferState = MIXED; |
| } else if (mixBufferState == MIXED) { |
| mixBufferState = UNDEFINED; |
| } |
| bool attemptedWrite = false; |
| //bool didFullWrite = false; // dumpsys could display a count of partial writes |
| if ((command & FastMixerState::WRITE) && (outputSink != NULL) && (mixBuffer != NULL)) { |
| if (mixBufferState == UNDEFINED) { |
| memset(mixBuffer, 0, frameCount * 2 * sizeof(short)); |
| mixBufferState = ZEROED; |
| } |
| if (teeSink != NULL) { |
| (void) teeSink->write(mixBuffer, frameCount); |
| } |
| // FIXME write() is non-blocking and lock-free for a properly implemented NBAIO sink, |
| // but this code should be modified to handle both non-blocking and blocking sinks |
| dumpState->mWriteSequence++; |
| ATRACE_BEGIN("write"); |
| ssize_t framesWritten = outputSink->write(mixBuffer, frameCount); |
| ATRACE_END(); |
| dumpState->mWriteSequence++; |
| if (framesWritten >= 0) { |
| ALOG_ASSERT((size_t) framesWritten <= frameCount); |
| dumpState->mFramesWritten += framesWritten; |
| //if ((size_t) framesWritten == frameCount) { |
| // didFullWrite = true; |
| //} |
| } else { |
| dumpState->mWriteErrors++; |
| } |
| attemptedWrite = true; |
| // FIXME count # of writes blocked excessively, CPU usage, etc. for dump |
| } |
| |
| // To be exactly periodic, compute the next sleep time based on current time. |
| // This code doesn't have long-term stability when the sink is non-blocking. |
| // FIXME To avoid drift, use the local audio clock or watch the sink's fill status. |
| struct timespec newTs; |
| int rc = clock_gettime(CLOCK_MONOTONIC, &newTs); |
| if (rc == 0) { |
| //logWriter->logTimestamp(newTs); |
| if (oldTsValid) { |
| time_t sec = newTs.tv_sec - oldTs.tv_sec; |
| long nsec = newTs.tv_nsec - oldTs.tv_nsec; |
| ALOGE_IF(sec < 0 || (sec == 0 && nsec < 0), |
| "clock_gettime(CLOCK_MONOTONIC) failed: was %ld.%09ld but now %ld.%09ld", |
| oldTs.tv_sec, oldTs.tv_nsec, newTs.tv_sec, newTs.tv_nsec); |
| if (nsec < 0) { |
| --sec; |
| nsec += 1000000000; |
| } |
| // To avoid an initial underrun on fast tracks after exiting standby, |
| // do not start pulling data from tracks and mixing until warmup is complete. |
| // Warmup is considered complete after the earlier of: |
| // MIN_WARMUP_CYCLES write() attempts and last one blocks for at least warmupNs |
| // MAX_WARMUP_CYCLES write() attempts. |
| // This is overly conservative, but to get better accuracy requires a new HAL API. |
| if (!isWarm && attemptedWrite) { |
| measuredWarmupTs.tv_sec += sec; |
| measuredWarmupTs.tv_nsec += nsec; |
| if (measuredWarmupTs.tv_nsec >= 1000000000) { |
| measuredWarmupTs.tv_sec++; |
| measuredWarmupTs.tv_nsec -= 1000000000; |
| } |
| ++warmupCycles; |
| if ((nsec > warmupNs && warmupCycles >= MIN_WARMUP_CYCLES) || |
| (warmupCycles >= MAX_WARMUP_CYCLES)) { |
| isWarm = true; |
| dumpState->mMeasuredWarmupTs = measuredWarmupTs; |
| dumpState->mWarmupCycles = warmupCycles; |
| } |
| } |
| sleepNs = -1; |
| if (isWarm) { |
| if (sec > 0 || nsec > underrunNs) { |
| ATRACE_NAME("underrun"); |
| // FIXME only log occasionally |
| ALOGV("underrun: time since last cycle %d.%03ld sec", |
| (int) sec, nsec / 1000000L); |
| dumpState->mUnderruns++; |
| ignoreNextOverrun = true; |
| } else if (nsec < overrunNs) { |
| if (ignoreNextOverrun) { |
| ignoreNextOverrun = false; |
| } else { |
| // FIXME only log occasionally |
| ALOGV("overrun: time since last cycle %d.%03ld sec", |
| (int) sec, nsec / 1000000L); |
| dumpState->mOverruns++; |
| } |
| // This forces a minimum cycle time. It: |
| // - compensates for an audio HAL with jitter due to sample rate conversion |
| // - works with a variable buffer depth audio HAL that never pulls at a rate |
| // < than overrunNs per buffer. |
| // - recovers from overrun immediately after underrun |
| // It doesn't work with a non-blocking audio HAL. |
| sleepNs = forceNs - nsec; |
| } else { |
| ignoreNextOverrun = false; |
| } |
| } |
| #ifdef FAST_MIXER_STATISTICS |
| if (isWarm) { |
| // advance the FIFO queue bounds |
| size_t i = bounds & (FastMixerDumpState::kSamplingN - 1); |
| bounds = (bounds & 0xFFFF0000) | ((bounds + 1) & 0xFFFF); |
| if (full) { |
| bounds += 0x10000; |
| } else if (!(bounds & (FastMixerDumpState::kSamplingN - 1))) { |
| full = true; |
| } |
| // compute the delta value of clock_gettime(CLOCK_MONOTONIC) |
| uint32_t monotonicNs = nsec; |
| if (sec > 0 && sec < 4) { |
| monotonicNs += sec * 1000000000; |
| } |
| // compute the raw CPU load = delta value of clock_gettime(CLOCK_THREAD_CPUTIME_ID) |
| uint32_t loadNs = 0; |
| struct timespec newLoad; |
| rc = clock_gettime(CLOCK_THREAD_CPUTIME_ID, &newLoad); |
| if (rc == 0) { |
| if (oldLoadValid) { |
| sec = newLoad.tv_sec - oldLoad.tv_sec; |
| nsec = newLoad.tv_nsec - oldLoad.tv_nsec; |
| if (nsec < 0) { |
| --sec; |
| nsec += 1000000000; |
| } |
| loadNs = nsec; |
| if (sec > 0 && sec < 4) { |
| loadNs += sec * 1000000000; |
| } |
| } else { |
| // first time through the loop |
| oldLoadValid = true; |
| } |
| oldLoad = newLoad; |
| } |
| #ifdef CPU_FREQUENCY_STATISTICS |
| // get the absolute value of CPU clock frequency in kHz |
| int cpuNum = sched_getcpu(); |
| uint32_t kHz = tcu.getCpukHz(cpuNum); |
| kHz = (kHz << 4) | (cpuNum & 0xF); |
| #endif |
| // save values in FIFO queues for dumpsys |
| // these stores #1, #2, #3 are not atomic with respect to each other, |
| // or with respect to store #4 below |
| dumpState->mMonotonicNs[i] = monotonicNs; |
| dumpState->mLoadNs[i] = loadNs; |
| #ifdef CPU_FREQUENCY_STATISTICS |
| dumpState->mCpukHz[i] = kHz; |
| #endif |
| // this store #4 is not atomic with respect to stores #1, #2, #3 above, but |
| // the newest open and oldest closed halves are atomic with respect to each other |
| dumpState->mBounds = bounds; |
| ATRACE_INT("cycle_ms", monotonicNs / 1000000); |
| ATRACE_INT("load_us", loadNs / 1000); |
| } |
| #endif |
| } else { |
| // first time through the loop |
| oldTsValid = true; |
| sleepNs = periodNs; |
| ignoreNextOverrun = true; |
| } |
| oldTs = newTs; |
| } else { |
| // monotonic clock is broken |
| oldTsValid = false; |
| sleepNs = periodNs; |
| } |
| |
| |
| } // for (;;) |
| |
| // never return 'true'; Thread::_threadLoop() locks mutex which can result in priority inversion |
| } |
| |
| FastMixerDumpState::FastMixerDumpState() : |
| mCommand(FastMixerState::INITIAL), mWriteSequence(0), mFramesWritten(0), |
| mNumTracks(0), mWriteErrors(0), mUnderruns(0), mOverruns(0), |
| mSampleRate(0), mFrameCount(0), /* mMeasuredWarmupTs({0, 0}), */ mWarmupCycles(0), |
| mTrackMask(0) |
| #ifdef FAST_MIXER_STATISTICS |
| , mBounds(0) |
| #endif |
| { |
| mMeasuredWarmupTs.tv_sec = 0; |
| mMeasuredWarmupTs.tv_nsec = 0; |
| // sample arrays aren't accessed atomically with respect to the bounds, |
| // so clearing reduces chance for dumpsys to read random uninitialized samples |
| memset(&mMonotonicNs, 0, sizeof(mMonotonicNs)); |
| memset(&mLoadNs, 0, sizeof(mLoadNs)); |
| #ifdef CPU_FREQUENCY_STATISTICS |
| memset(&mCpukHz, 0, sizeof(mCpukHz)); |
| #endif |
| } |
| |
| FastMixerDumpState::~FastMixerDumpState() |
| { |
| } |
| |
| // helper function called by qsort() |
| static int compare_uint32_t(const void *pa, const void *pb) |
| { |
| uint32_t a = *(const uint32_t *)pa; |
| uint32_t b = *(const uint32_t *)pb; |
| if (a < b) { |
| return -1; |
| } else if (a > b) { |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| void FastMixerDumpState::dump(int fd) |
| { |
| if (mCommand == FastMixerState::INITIAL) { |
| fdprintf(fd, "FastMixer not initialized\n"); |
| return; |
| } |
| #define COMMAND_MAX 32 |
| char string[COMMAND_MAX]; |
| switch (mCommand) { |
| case FastMixerState::INITIAL: |
| strcpy(string, "INITIAL"); |
| break; |
| case FastMixerState::HOT_IDLE: |
| strcpy(string, "HOT_IDLE"); |
| break; |
| case FastMixerState::COLD_IDLE: |
| strcpy(string, "COLD_IDLE"); |
| break; |
| case FastMixerState::EXIT: |
| strcpy(string, "EXIT"); |
| break; |
| case FastMixerState::MIX: |
| strcpy(string, "MIX"); |
| break; |
| case FastMixerState::WRITE: |
| strcpy(string, "WRITE"); |
| break; |
| case FastMixerState::MIX_WRITE: |
| strcpy(string, "MIX_WRITE"); |
| break; |
| default: |
| snprintf(string, COMMAND_MAX, "%d", mCommand); |
| break; |
| } |
| double measuredWarmupMs = (mMeasuredWarmupTs.tv_sec * 1000.0) + |
| (mMeasuredWarmupTs.tv_nsec / 1000000.0); |
| double mixPeriodSec = (double) mFrameCount / (double) mSampleRate; |
| fdprintf(fd, "FastMixer command=%s writeSequence=%u framesWritten=%u\n" |
| " numTracks=%u writeErrors=%u underruns=%u overruns=%u\n" |
| " sampleRate=%u frameCount=%u measuredWarmup=%.3g ms, warmupCycles=%u\n" |
| " mixPeriod=%.2f ms\n", |
| string, mWriteSequence, mFramesWritten, |
| mNumTracks, mWriteErrors, mUnderruns, mOverruns, |
| mSampleRate, mFrameCount, measuredWarmupMs, mWarmupCycles, |
| mixPeriodSec * 1e3); |
| #ifdef FAST_MIXER_STATISTICS |
| // find the interval of valid samples |
| uint32_t bounds = mBounds; |
| uint32_t newestOpen = bounds & 0xFFFF; |
| uint32_t oldestClosed = bounds >> 16; |
| uint32_t n = (newestOpen - oldestClosed) & 0xFFFF; |
| if (n > kSamplingN) { |
| ALOGE("too many samples %u", n); |
| n = kSamplingN; |
| } |
| // statistics for monotonic (wall clock) time, thread raw CPU load in time, CPU clock frequency, |
| // and adjusted CPU load in MHz normalized for CPU clock frequency |
| CentralTendencyStatistics wall, loadNs; |
| #ifdef CPU_FREQUENCY_STATISTICS |
| CentralTendencyStatistics kHz, loadMHz; |
| uint32_t previousCpukHz = 0; |
| #endif |
| // Assuming a normal distribution for cycle times, three standard deviations on either side of |
| // the mean account for 99.73% of the population. So if we take each tail to be 1/1000 of the |
| // sample set, we get 99.8% combined, or close to three standard deviations. |
| static const uint32_t kTailDenominator = 1000; |
| uint32_t *tail = n >= kTailDenominator ? new uint32_t[n] : NULL; |
| // loop over all the samples |
| for (uint32_t j = 0; j < n; ++j) { |
| size_t i = oldestClosed++ & (kSamplingN - 1); |
| uint32_t wallNs = mMonotonicNs[i]; |
| if (tail != NULL) { |
| tail[j] = wallNs; |
| } |
| wall.sample(wallNs); |
| uint32_t sampleLoadNs = mLoadNs[i]; |
| loadNs.sample(sampleLoadNs); |
| #ifdef CPU_FREQUENCY_STATISTICS |
| uint32_t sampleCpukHz = mCpukHz[i]; |
| // skip bad kHz samples |
| if ((sampleCpukHz & ~0xF) != 0) { |
| kHz.sample(sampleCpukHz >> 4); |
| if (sampleCpukHz == previousCpukHz) { |
| double megacycles = (double) sampleLoadNs * (double) (sampleCpukHz >> 4) * 1e-12; |
| double adjMHz = megacycles / mixPeriodSec; // _not_ wallNs * 1e9 |
| loadMHz.sample(adjMHz); |
| } |
| } |
| previousCpukHz = sampleCpukHz; |
| #endif |
| } |
| fdprintf(fd, "Simple moving statistics over last %.1f seconds:\n", wall.n() * mixPeriodSec); |
| fdprintf(fd, " wall clock time in ms per mix cycle:\n" |
| " mean=%.2f min=%.2f max=%.2f stddev=%.2f\n", |
| wall.mean()*1e-6, wall.minimum()*1e-6, wall.maximum()*1e-6, wall.stddev()*1e-6); |
| fdprintf(fd, " raw CPU load in us per mix cycle:\n" |
| " mean=%.0f min=%.0f max=%.0f stddev=%.0f\n", |
| loadNs.mean()*1e-3, loadNs.minimum()*1e-3, loadNs.maximum()*1e-3, |
| loadNs.stddev()*1e-3); |
| #ifdef CPU_FREQUENCY_STATISTICS |
| fdprintf(fd, " CPU clock frequency in MHz:\n" |
| " mean=%.0f min=%.0f max=%.0f stddev=%.0f\n", |
| kHz.mean()*1e-3, kHz.minimum()*1e-3, kHz.maximum()*1e-3, kHz.stddev()*1e-3); |
| fdprintf(fd, " adjusted CPU load in MHz (i.e. normalized for CPU clock frequency):\n" |
| " mean=%.1f min=%.1f max=%.1f stddev=%.1f\n", |
| loadMHz.mean(), loadMHz.minimum(), loadMHz.maximum(), loadMHz.stddev()); |
| #endif |
| if (tail != NULL) { |
| qsort(tail, n, sizeof(uint32_t), compare_uint32_t); |
| // assume same number of tail samples on each side, left and right |
| uint32_t count = n / kTailDenominator; |
| CentralTendencyStatistics left, right; |
| for (uint32_t i = 0; i < count; ++i) { |
| left.sample(tail[i]); |
| right.sample(tail[n - (i + 1)]); |
| } |
| fdprintf(fd, "Distribution of mix cycle times in ms for the tails (> ~3 stddev outliers):\n" |
| " left tail: mean=%.2f min=%.2f max=%.2f stddev=%.2f\n" |
| " right tail: mean=%.2f min=%.2f max=%.2f stddev=%.2f\n", |
| left.mean()*1e-6, left.minimum()*1e-6, left.maximum()*1e-6, left.stddev()*1e-6, |
| right.mean()*1e-6, right.minimum()*1e-6, right.maximum()*1e-6, |
| right.stddev()*1e-6); |
| delete[] tail; |
| } |
| #endif |
| // The active track mask and track states are updated non-atomically. |
| // So if we relied on isActive to decide whether to display, |
| // then we might display an obsolete track or omit an active track. |
| // Instead we always display all tracks, with an indication |
| // of whether we think the track is active. |
| uint32_t trackMask = mTrackMask; |
| fdprintf(fd, "Fast tracks: kMaxFastTracks=%u activeMask=%#x\n", |
| FastMixerState::kMaxFastTracks, trackMask); |
| fdprintf(fd, "Index Active Full Partial Empty Recent Ready\n"); |
| for (uint32_t i = 0; i < FastMixerState::kMaxFastTracks; ++i, trackMask >>= 1) { |
| bool isActive = trackMask & 1; |
| const FastTrackDump *ftDump = &mTracks[i]; |
| const FastTrackUnderruns& underruns = ftDump->mUnderruns; |
| const char *mostRecent; |
| switch (underruns.mBitFields.mMostRecent) { |
| case UNDERRUN_FULL: |
| mostRecent = "full"; |
| break; |
| case UNDERRUN_PARTIAL: |
| mostRecent = "partial"; |
| break; |
| case UNDERRUN_EMPTY: |
| mostRecent = "empty"; |
| break; |
| default: |
| mostRecent = "?"; |
| break; |
| } |
| fdprintf(fd, "%5u %6s %4u %7u %5u %7s %5u\n", i, isActive ? "yes" : "no", |
| (underruns.mBitFields.mFull) & UNDERRUN_MASK, |
| (underruns.mBitFields.mPartial) & UNDERRUN_MASK, |
| (underruns.mBitFields.mEmpty) & UNDERRUN_MASK, |
| mostRecent, ftDump->mFramesReady); |
| } |
| } |
| |
| } // namespace android |
