| /* |
| ** |
| ** Copyright 2012, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| |
| #define LOG_TAG "AudioFlinger" |
| //#define LOG_NDEBUG 0 |
| #define ATRACE_TAG ATRACE_TAG_AUDIO |
| |
| #include <math.h> |
| #include <fcntl.h> |
| #include <sys/stat.h> |
| #include <cutils/properties.h> |
| #include <cutils/compiler.h> |
| #include <utils/Log.h> |
| #include <utils/Trace.h> |
| |
| #include <private/media/AudioTrackShared.h> |
| #include <hardware/audio.h> |
| #include <audio_effects/effect_ns.h> |
| #include <audio_effects/effect_aec.h> |
| #include <audio_utils/primitives.h> |
| |
| // NBAIO implementations |
| #include <media/nbaio/AudioStreamOutSink.h> |
| #include <media/nbaio/MonoPipe.h> |
| #include <media/nbaio/MonoPipeReader.h> |
| #include <media/nbaio/Pipe.h> |
| #include <media/nbaio/PipeReader.h> |
| #include <media/nbaio/SourceAudioBufferProvider.h> |
| |
| #include <powermanager/PowerManager.h> |
| |
| #include <common_time/cc_helper.h> |
| #include <common_time/local_clock.h> |
| |
| #include "AudioFlinger.h" |
| #include "AudioMixer.h" |
| #include "FastMixer.h" |
| #include "ServiceUtilities.h" |
| #include "SchedulingPolicyService.h" |
| |
| #undef ADD_BATTERY_DATA |
| |
| #ifdef ADD_BATTERY_DATA |
| #include <media/IMediaPlayerService.h> |
| #include <media/IMediaDeathNotifier.h> |
| #endif |
| |
| // #define DEBUG_CPU_USAGE 10 // log statistics every n wall clock seconds |
| #ifdef DEBUG_CPU_USAGE |
| #include <cpustats/CentralTendencyStatistics.h> |
| #include <cpustats/ThreadCpuUsage.h> |
| #endif |
| |
| // ---------------------------------------------------------------------------- |
| |
| // Note: the following macro is used for extremely verbose logging message. In |
| // order to run with ALOG_ASSERT turned on, we need to have LOG_NDEBUG set to |
| // 0; but one side effect of this is to turn all LOGV's as well. Some messages |
| // are so verbose that we want to suppress them even when we have ALOG_ASSERT |
| // turned on. Do not uncomment the #def below unless you really know what you |
| // are doing and want to see all of the extremely verbose messages. |
| //#define VERY_VERY_VERBOSE_LOGGING |
| #ifdef VERY_VERY_VERBOSE_LOGGING |
| #define ALOGVV ALOGV |
| #else |
| #define ALOGVV(a...) do { } while(0) |
| #endif |
| |
| namespace android { |
| |
| // retry counts for buffer fill timeout |
| // 50 * ~20msecs = 1 second |
| static const int8_t kMaxTrackRetries = 50; |
| static const int8_t kMaxTrackStartupRetries = 50; |
| // allow less retry attempts on direct output thread. |
| // direct outputs can be a scarce resource in audio hardware and should |
| // be released as quickly as possible. |
| static const int8_t kMaxTrackRetriesDirect = 2; |
| |
| // don't warn about blocked writes or record buffer overflows more often than this |
| static const nsecs_t kWarningThrottleNs = seconds(5); |
| |
| // RecordThread loop sleep time upon application overrun or audio HAL read error |
| static const int kRecordThreadSleepUs = 5000; |
| |
| // maximum time to wait for setParameters to complete |
| static const nsecs_t kSetParametersTimeoutNs = seconds(2); |
| |
| // minimum sleep time for the mixer thread loop when tracks are active but in underrun |
| static const uint32_t kMinThreadSleepTimeUs = 5000; |
| // maximum divider applied to the active sleep time in the mixer thread loop |
| static const uint32_t kMaxThreadSleepTimeShift = 2; |
| |
| // minimum normal mix buffer size, expressed in milliseconds rather than frames |
| static const uint32_t kMinNormalMixBufferSizeMs = 20; |
| // maximum normal mix buffer size |
| static const uint32_t kMaxNormalMixBufferSizeMs = 24; |
| |
| // Whether to use fast mixer |
| static const enum { |
| FastMixer_Never, // never initialize or use: for debugging only |
| FastMixer_Always, // always initialize and use, even if not needed: for debugging only |
| // normal mixer multiplier is 1 |
| FastMixer_Static, // initialize if needed, then use all the time if initialized, |
| // multiplier is calculated based on min & max normal mixer buffer size |
| FastMixer_Dynamic, // initialize if needed, then use dynamically depending on track load, |
| // multiplier is calculated based on min & max normal mixer buffer size |
| // FIXME for FastMixer_Dynamic: |
| // Supporting this option will require fixing HALs that can't handle large writes. |
| // For example, one HAL implementation returns an error from a large write, |
| // and another HAL implementation corrupts memory, possibly in the sample rate converter. |
| // We could either fix the HAL implementations, or provide a wrapper that breaks |
| // up large writes into smaller ones, and the wrapper would need to deal with scheduler. |
| } kUseFastMixer = FastMixer_Static; |
| |
| // Priorities for requestPriority |
| static const int kPriorityAudioApp = 2; |
| static const int kPriorityFastMixer = 3; |
| |
| // IAudioFlinger::createTrack() reports back to client the total size of shared memory area |
| // for the track. The client then sub-divides this into smaller buffers for its use. |
| // Currently the client uses double-buffering by default, but doesn't tell us about that. |
| // So for now we just assume that client is double-buffered. |
| // FIXME It would be better for client to tell AudioFlinger whether it wants double-buffering or |
| // N-buffering, so AudioFlinger could allocate the right amount of memory. |
| // See the client's minBufCount and mNotificationFramesAct calculations for details. |
| static const int kFastTrackMultiplier = 2; |
| |
| // ---------------------------------------------------------------------------- |
| |
| #ifdef ADD_BATTERY_DATA |
| // To collect the amplifier usage |
| static void addBatteryData(uint32_t params) { |
| sp<IMediaPlayerService> service = IMediaDeathNotifier::getMediaPlayerService(); |
| if (service == NULL) { |
| // it already logged |
| return; |
| } |
| |
| service->addBatteryData(params); |
| } |
| #endif |
| |
| |
| // ---------------------------------------------------------------------------- |
| // CPU Stats |
| // ---------------------------------------------------------------------------- |
| |
| class CpuStats { |
| public: |
| CpuStats(); |
| void sample(const String8 &title); |
| #ifdef DEBUG_CPU_USAGE |
| private: |
| ThreadCpuUsage mCpuUsage; // instantaneous thread CPU usage in wall clock ns |
| CentralTendencyStatistics mWcStats; // statistics on thread CPU usage in wall clock ns |
| |
| CentralTendencyStatistics mHzStats; // statistics on thread CPU usage in cycles |
| |
| int mCpuNum; // thread's current CPU number |
| int mCpukHz; // frequency of thread's current CPU in kHz |
| #endif |
| }; |
| |
| CpuStats::CpuStats() |
| #ifdef DEBUG_CPU_USAGE |
| : mCpuNum(-1), mCpukHz(-1) |
| #endif |
| { |
| } |
| |
| void CpuStats::sample(const String8 &title) { |
| #ifdef DEBUG_CPU_USAGE |
| // get current thread's delta CPU time in wall clock ns |
| double wcNs; |
| bool valid = mCpuUsage.sampleAndEnable(wcNs); |
| |
| // record sample for wall clock statistics |
| if (valid) { |
| mWcStats.sample(wcNs); |
| } |
| |
| // get the current CPU number |
| int cpuNum = sched_getcpu(); |
| |
| // get the current CPU frequency in kHz |
| int cpukHz = mCpuUsage.getCpukHz(cpuNum); |
| |
| // check if either CPU number or frequency changed |
| if (cpuNum != mCpuNum || cpukHz != mCpukHz) { |
| mCpuNum = cpuNum; |
| mCpukHz = cpukHz; |
| // ignore sample for purposes of cycles |
| valid = false; |
| } |
| |
| // if no change in CPU number or frequency, then record sample for cycle statistics |
| if (valid && mCpukHz > 0) { |
| double cycles = wcNs * cpukHz * 0.000001; |
| mHzStats.sample(cycles); |
| } |
| |
| unsigned n = mWcStats.n(); |
| // mCpuUsage.elapsed() is expensive, so don't call it every loop |
| if ((n & 127) == 1) { |
| long long elapsed = mCpuUsage.elapsed(); |
| if (elapsed >= DEBUG_CPU_USAGE * 1000000000LL) { |
| double perLoop = elapsed / (double) n; |
| double perLoop100 = perLoop * 0.01; |
| double perLoop1k = perLoop * 0.001; |
| double mean = mWcStats.mean(); |
| double stddev = mWcStats.stddev(); |
| double minimum = mWcStats.minimum(); |
| double maximum = mWcStats.maximum(); |
| double meanCycles = mHzStats.mean(); |
| double stddevCycles = mHzStats.stddev(); |
| double minCycles = mHzStats.minimum(); |
| double maxCycles = mHzStats.maximum(); |
| mCpuUsage.resetElapsed(); |
| mWcStats.reset(); |
| mHzStats.reset(); |
| ALOGD("CPU usage for %s over past %.1f secs\n" |
| " (%u mixer loops at %.1f mean ms per loop):\n" |
| " us per mix loop: mean=%.0f stddev=%.0f min=%.0f max=%.0f\n" |
| " %% of wall: mean=%.1f stddev=%.1f min=%.1f max=%.1f\n" |
| " MHz: mean=%.1f, stddev=%.1f, min=%.1f max=%.1f", |
| title.string(), |
| elapsed * .000000001, n, perLoop * .000001, |
| mean * .001, |
| stddev * .001, |
| minimum * .001, |
| maximum * .001, |
| mean / perLoop100, |
| stddev / perLoop100, |
| minimum / perLoop100, |
| maximum / perLoop100, |
| meanCycles / perLoop1k, |
| stddevCycles / perLoop1k, |
| minCycles / perLoop1k, |
| maxCycles / perLoop1k); |
| |
| } |
| } |
| #endif |
| }; |
| |
| // ---------------------------------------------------------------------------- |
| // ThreadBase |
| // ---------------------------------------------------------------------------- |
| |
| AudioFlinger::ThreadBase::ThreadBase(const sp<AudioFlinger>& audioFlinger, audio_io_handle_t id, |
| audio_devices_t outDevice, audio_devices_t inDevice, type_t type) |
| : Thread(false /*canCallJava*/), |
| mType(type), |
| mAudioFlinger(audioFlinger), mSampleRate(0), mFrameCount(0), mNormalFrameCount(0), |
| // mChannelMask |
| mChannelCount(0), |
| mFrameSize(1), mFormat(AUDIO_FORMAT_INVALID), |
| mParamStatus(NO_ERROR), |
| mStandby(false), mOutDevice(outDevice), mInDevice(inDevice), |
| mAudioSource(AUDIO_SOURCE_DEFAULT), mId(id), |
| // mName will be set by concrete (non-virtual) subclass |
| mDeathRecipient(new PMDeathRecipient(this)) |
| { |
| } |
| |
| AudioFlinger::ThreadBase::~ThreadBase() |
| { |
| mParamCond.broadcast(); |
| // do not lock the mutex in destructor |
| releaseWakeLock_l(); |
| if (mPowerManager != 0) { |
| sp<IBinder> binder = mPowerManager->asBinder(); |
| binder->unlinkToDeath(mDeathRecipient); |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::exit() |
| { |
| ALOGV("ThreadBase::exit"); |
| // do any cleanup required for exit to succeed |
| preExit(); |
| { |
| // This lock prevents the following race in thread (uniprocessor for illustration): |
| // if (!exitPending()) { |
| // // context switch from here to exit() |
| // // exit() calls requestExit(), what exitPending() observes |
| // // exit() calls signal(), which is dropped since no waiters |
| // // context switch back from exit() to here |
| // mWaitWorkCV.wait(...); |
| // // now thread is hung |
| // } |
| AutoMutex lock(mLock); |
| requestExit(); |
| mWaitWorkCV.broadcast(); |
| } |
| // When Thread::requestExitAndWait is made virtual and this method is renamed to |
| // "virtual status_t requestExitAndWait()", replace by "return Thread::requestExitAndWait();" |
| requestExitAndWait(); |
| } |
| |
| status_t AudioFlinger::ThreadBase::setParameters(const String8& keyValuePairs) |
| { |
| status_t status; |
| |
| ALOGV("ThreadBase::setParameters() %s", keyValuePairs.string()); |
| Mutex::Autolock _l(mLock); |
| |
| mNewParameters.add(keyValuePairs); |
| mWaitWorkCV.signal(); |
| // wait condition with timeout in case the thread loop has exited |
| // before the request could be processed |
| if (mParamCond.waitRelative(mLock, kSetParametersTimeoutNs) == NO_ERROR) { |
| status = mParamStatus; |
| mWaitWorkCV.signal(); |
| } else { |
| status = TIMED_OUT; |
| } |
| return status; |
| } |
| |
| void AudioFlinger::ThreadBase::sendIoConfigEvent(int event, int param) |
| { |
| Mutex::Autolock _l(mLock); |
| sendIoConfigEvent_l(event, param); |
| } |
| |
| // sendIoConfigEvent_l() must be called with ThreadBase::mLock held |
| void AudioFlinger::ThreadBase::sendIoConfigEvent_l(int event, int param) |
| { |
| IoConfigEvent *ioEvent = new IoConfigEvent(event, param); |
| mConfigEvents.add(static_cast<ConfigEvent *>(ioEvent)); |
| ALOGV("sendIoConfigEvent() num events %d event %d, param %d", mConfigEvents.size(), event, |
| param); |
| mWaitWorkCV.signal(); |
| } |
| |
| // sendPrioConfigEvent_l() must be called with ThreadBase::mLock held |
| void AudioFlinger::ThreadBase::sendPrioConfigEvent_l(pid_t pid, pid_t tid, int32_t prio) |
| { |
| PrioConfigEvent *prioEvent = new PrioConfigEvent(pid, tid, prio); |
| mConfigEvents.add(static_cast<ConfigEvent *>(prioEvent)); |
| ALOGV("sendPrioConfigEvent_l() num events %d pid %d, tid %d prio %d", |
| mConfigEvents.size(), pid, tid, prio); |
| mWaitWorkCV.signal(); |
| } |
| |
| void AudioFlinger::ThreadBase::processConfigEvents() |
| { |
| mLock.lock(); |
| while (!mConfigEvents.isEmpty()) { |
| ALOGV("processConfigEvents() remaining events %d", mConfigEvents.size()); |
| ConfigEvent *event = mConfigEvents[0]; |
| mConfigEvents.removeAt(0); |
| // release mLock before locking AudioFlinger mLock: lock order is always |
| // AudioFlinger then ThreadBase to avoid cross deadlock |
| mLock.unlock(); |
| switch(event->type()) { |
| case CFG_EVENT_PRIO: { |
| PrioConfigEvent *prioEvent = static_cast<PrioConfigEvent *>(event); |
| // FIXME Need to understand why this has be done asynchronously |
| int err = requestPriority(prioEvent->pid(), prioEvent->tid(), prioEvent->prio(), |
| true /*asynchronous*/); |
| if (err != 0) { |
| ALOGW("Policy SCHED_FIFO priority %d is unavailable for pid %d tid %d; " |
| "error %d", |
| prioEvent->prio(), prioEvent->pid(), prioEvent->tid(), err); |
| } |
| } break; |
| case CFG_EVENT_IO: { |
| IoConfigEvent *ioEvent = static_cast<IoConfigEvent *>(event); |
| mAudioFlinger->mLock.lock(); |
| audioConfigChanged_l(ioEvent->event(), ioEvent->param()); |
| mAudioFlinger->mLock.unlock(); |
| } break; |
| default: |
| ALOGE("processConfigEvents() unknown event type %d", event->type()); |
| break; |
| } |
| delete event; |
| mLock.lock(); |
| } |
| mLock.unlock(); |
| } |
| |
| void AudioFlinger::ThreadBase::dumpBase(int fd, const Vector<String16>& args) |
| { |
| const size_t SIZE = 256; |
| char buffer[SIZE]; |
| String8 result; |
| |
| bool locked = AudioFlinger::dumpTryLock(mLock); |
| if (!locked) { |
| snprintf(buffer, SIZE, "thread %p maybe dead locked\n", this); |
| write(fd, buffer, strlen(buffer)); |
| } |
| |
| snprintf(buffer, SIZE, "io handle: %d\n", mId); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "TID: %d\n", getTid()); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "standby: %d\n", mStandby); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Sample rate: %u\n", mSampleRate); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "HAL frame count: %d\n", mFrameCount); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Normal frame count: %d\n", mNormalFrameCount); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Channel Count: %d\n", mChannelCount); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Channel Mask: 0x%08x\n", mChannelMask); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Format: %d\n", mFormat); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Frame size: %u\n", mFrameSize); |
| result.append(buffer); |
| |
| snprintf(buffer, SIZE, "\nPending setParameters commands: \n"); |
| result.append(buffer); |
| result.append(" Index Command"); |
| for (size_t i = 0; i < mNewParameters.size(); ++i) { |
| snprintf(buffer, SIZE, "\n %02d ", i); |
| result.append(buffer); |
| result.append(mNewParameters[i]); |
| } |
| |
| snprintf(buffer, SIZE, "\n\nPending config events: \n"); |
| result.append(buffer); |
| for (size_t i = 0; i < mConfigEvents.size(); i++) { |
| mConfigEvents[i]->dump(buffer, SIZE); |
| result.append(buffer); |
| } |
| result.append("\n"); |
| |
| write(fd, result.string(), result.size()); |
| |
| if (locked) { |
| mLock.unlock(); |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::dumpEffectChains(int fd, const Vector<String16>& args) |
| { |
| const size_t SIZE = 256; |
| char buffer[SIZE]; |
| String8 result; |
| |
| snprintf(buffer, SIZE, "\n- %d Effect Chains:\n", mEffectChains.size()); |
| write(fd, buffer, strlen(buffer)); |
| |
| for (size_t i = 0; i < mEffectChains.size(); ++i) { |
| sp<EffectChain> chain = mEffectChains[i]; |
| if (chain != 0) { |
| chain->dump(fd, args); |
| } |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::acquireWakeLock() |
| { |
| Mutex::Autolock _l(mLock); |
| acquireWakeLock_l(); |
| } |
| |
| void AudioFlinger::ThreadBase::acquireWakeLock_l() |
| { |
| if (mPowerManager == 0) { |
| // use checkService() to avoid blocking if power service is not up yet |
| sp<IBinder> binder = |
| defaultServiceManager()->checkService(String16("power")); |
| if (binder == 0) { |
| ALOGW("Thread %s cannot connect to the power manager service", mName); |
| } else { |
| mPowerManager = interface_cast<IPowerManager>(binder); |
| binder->linkToDeath(mDeathRecipient); |
| } |
| } |
| if (mPowerManager != 0) { |
| sp<IBinder> binder = new BBinder(); |
| status_t status = mPowerManager->acquireWakeLock(POWERMANAGER_PARTIAL_WAKE_LOCK, |
| binder, |
| String16(mName)); |
| if (status == NO_ERROR) { |
| mWakeLockToken = binder; |
| } |
| ALOGV("acquireWakeLock_l() %s status %d", mName, status); |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::releaseWakeLock() |
| { |
| Mutex::Autolock _l(mLock); |
| releaseWakeLock_l(); |
| } |
| |
| void AudioFlinger::ThreadBase::releaseWakeLock_l() |
| { |
| if (mWakeLockToken != 0) { |
| ALOGV("releaseWakeLock_l() %s", mName); |
| if (mPowerManager != 0) { |
| mPowerManager->releaseWakeLock(mWakeLockToken, 0); |
| } |
| mWakeLockToken.clear(); |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::clearPowerManager() |
| { |
| Mutex::Autolock _l(mLock); |
| releaseWakeLock_l(); |
| mPowerManager.clear(); |
| } |
| |
| void AudioFlinger::ThreadBase::PMDeathRecipient::binderDied(const wp<IBinder>& who) |
| { |
| sp<ThreadBase> thread = mThread.promote(); |
| if (thread != 0) { |
| thread->clearPowerManager(); |
| } |
| ALOGW("power manager service died !!!"); |
| } |
| |
| void AudioFlinger::ThreadBase::setEffectSuspended( |
| const effect_uuid_t *type, bool suspend, int sessionId) |
| { |
| Mutex::Autolock _l(mLock); |
| setEffectSuspended_l(type, suspend, sessionId); |
| } |
| |
| void AudioFlinger::ThreadBase::setEffectSuspended_l( |
| const effect_uuid_t *type, bool suspend, int sessionId) |
| { |
| sp<EffectChain> chain = getEffectChain_l(sessionId); |
| if (chain != 0) { |
| if (type != NULL) { |
| chain->setEffectSuspended_l(type, suspend); |
| } else { |
| chain->setEffectSuspendedAll_l(suspend); |
| } |
| } |
| |
| updateSuspendedSessions_l(type, suspend, sessionId); |
| } |
| |
| void AudioFlinger::ThreadBase::checkSuspendOnAddEffectChain_l(const sp<EffectChain>& chain) |
| { |
| ssize_t index = mSuspendedSessions.indexOfKey(chain->sessionId()); |
| if (index < 0) { |
| return; |
| } |
| |
| const KeyedVector <int, sp<SuspendedSessionDesc> >& sessionEffects = |
| mSuspendedSessions.valueAt(index); |
| |
| for (size_t i = 0; i < sessionEffects.size(); i++) { |
| sp<SuspendedSessionDesc> desc = sessionEffects.valueAt(i); |
| for (int j = 0; j < desc->mRefCount; j++) { |
| if (sessionEffects.keyAt(i) == EffectChain::kKeyForSuspendAll) { |
| chain->setEffectSuspendedAll_l(true); |
| } else { |
| ALOGV("checkSuspendOnAddEffectChain_l() suspending effects %08x", |
| desc->mType.timeLow); |
| chain->setEffectSuspended_l(&desc->mType, true); |
| } |
| } |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::updateSuspendedSessions_l(const effect_uuid_t *type, |
| bool suspend, |
| int sessionId) |
| { |
| ssize_t index = mSuspendedSessions.indexOfKey(sessionId); |
| |
| KeyedVector <int, sp<SuspendedSessionDesc> > sessionEffects; |
| |
| if (suspend) { |
| if (index >= 0) { |
| sessionEffects = mSuspendedSessions.valueAt(index); |
| } else { |
| mSuspendedSessions.add(sessionId, sessionEffects); |
| } |
| } else { |
| if (index < 0) { |
| return; |
| } |
| sessionEffects = mSuspendedSessions.valueAt(index); |
| } |
| |
| |
| int key = EffectChain::kKeyForSuspendAll; |
| if (type != NULL) { |
| key = type->timeLow; |
| } |
| index = sessionEffects.indexOfKey(key); |
| |
| sp<SuspendedSessionDesc> desc; |
| if (suspend) { |
| if (index >= 0) { |
| desc = sessionEffects.valueAt(index); |
| } else { |
| desc = new SuspendedSessionDesc(); |
| if (type != NULL) { |
| desc->mType = *type; |
| } |
| sessionEffects.add(key, desc); |
| ALOGV("updateSuspendedSessions_l() suspend adding effect %08x", key); |
| } |
| desc->mRefCount++; |
| } else { |
| if (index < 0) { |
| return; |
| } |
| desc = sessionEffects.valueAt(index); |
| if (--desc->mRefCount == 0) { |
| ALOGV("updateSuspendedSessions_l() restore removing effect %08x", key); |
| sessionEffects.removeItemsAt(index); |
| if (sessionEffects.isEmpty()) { |
| ALOGV("updateSuspendedSessions_l() restore removing session %d", |
| sessionId); |
| mSuspendedSessions.removeItem(sessionId); |
| } |
| } |
| } |
| if (!sessionEffects.isEmpty()) { |
| mSuspendedSessions.replaceValueFor(sessionId, sessionEffects); |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::checkSuspendOnEffectEnabled(const sp<EffectModule>& effect, |
| bool enabled, |
| int sessionId) |
| { |
| Mutex::Autolock _l(mLock); |
| checkSuspendOnEffectEnabled_l(effect, enabled, sessionId); |
| } |
| |
| void AudioFlinger::ThreadBase::checkSuspendOnEffectEnabled_l(const sp<EffectModule>& effect, |
| bool enabled, |
| int sessionId) |
| { |
| if (mType != RECORD) { |
| // suspend all effects in AUDIO_SESSION_OUTPUT_MIX when enabling any effect on |
| // another session. This gives the priority to well behaved effect control panels |
| // and applications not using global effects. |
| // Enabling post processing in AUDIO_SESSION_OUTPUT_STAGE session does not affect |
| // global effects |
| if ((sessionId != AUDIO_SESSION_OUTPUT_MIX) && (sessionId != AUDIO_SESSION_OUTPUT_STAGE)) { |
| setEffectSuspended_l(NULL, enabled, AUDIO_SESSION_OUTPUT_MIX); |
| } |
| } |
| |
| sp<EffectChain> chain = getEffectChain_l(sessionId); |
| if (chain != 0) { |
| chain->checkSuspendOnEffectEnabled(effect, enabled); |
| } |
| } |
| |
| // ThreadBase::createEffect_l() must be called with AudioFlinger::mLock held |
| sp<AudioFlinger::EffectHandle> AudioFlinger::ThreadBase::createEffect_l( |
| const sp<AudioFlinger::Client>& client, |
| const sp<IEffectClient>& effectClient, |
| int32_t priority, |
| int sessionId, |
| effect_descriptor_t *desc, |
| int *enabled, |
| status_t *status |
| ) |
| { |
| sp<EffectModule> effect; |
| sp<EffectHandle> handle; |
| status_t lStatus; |
| sp<EffectChain> chain; |
| bool chainCreated = false; |
| bool effectCreated = false; |
| bool effectRegistered = false; |
| |
| lStatus = initCheck(); |
| if (lStatus != NO_ERROR) { |
| ALOGW("createEffect_l() Audio driver not initialized."); |
| goto Exit; |
| } |
| |
| // Do not allow effects with session ID 0 on direct output or duplicating threads |
| // TODO: add rule for hw accelerated effects on direct outputs with non PCM format |
| if (sessionId == AUDIO_SESSION_OUTPUT_MIX && mType != MIXER) { |
| ALOGW("createEffect_l() Cannot add auxiliary effect %s to session %d", |
| desc->name, sessionId); |
| lStatus = BAD_VALUE; |
| goto Exit; |
| } |
| // Only Pre processor effects are allowed on input threads and only on input threads |
| if ((mType == RECORD) != ((desc->flags & EFFECT_FLAG_TYPE_MASK) == EFFECT_FLAG_TYPE_PRE_PROC)) { |
| ALOGW("createEffect_l() effect %s (flags %08x) created on wrong thread type %d", |
| desc->name, desc->flags, mType); |
| lStatus = BAD_VALUE; |
| goto Exit; |
| } |
| |
| ALOGV("createEffect_l() thread %p effect %s on session %d", this, desc->name, sessionId); |
| |
| { // scope for mLock |
| Mutex::Autolock _l(mLock); |
| |
| // check for existing effect chain with the requested audio session |
| chain = getEffectChain_l(sessionId); |
| if (chain == 0) { |
| // create a new chain for this session |
| ALOGV("createEffect_l() new effect chain for session %d", sessionId); |
| chain = new EffectChain(this, sessionId); |
| addEffectChain_l(chain); |
| chain->setStrategy(getStrategyForSession_l(sessionId)); |
| chainCreated = true; |
| } else { |
| effect = chain->getEffectFromDesc_l(desc); |
| } |
| |
| ALOGV("createEffect_l() got effect %p on chain %p", effect.get(), chain.get()); |
| |
| if (effect == 0) { |
| int id = mAudioFlinger->nextUniqueId(); |
| // Check CPU and memory usage |
| lStatus = AudioSystem::registerEffect(desc, mId, chain->strategy(), sessionId, id); |
| if (lStatus != NO_ERROR) { |
| goto Exit; |
| } |
| effectRegistered = true; |
| // create a new effect module if none present in the chain |
| effect = new EffectModule(this, chain, desc, id, sessionId); |
| lStatus = effect->status(); |
| if (lStatus != NO_ERROR) { |
| goto Exit; |
| } |
| lStatus = chain->addEffect_l(effect); |
| if (lStatus != NO_ERROR) { |
| goto Exit; |
| } |
| effectCreated = true; |
| |
| effect->setDevice(mOutDevice); |
| effect->setDevice(mInDevice); |
| effect->setMode(mAudioFlinger->getMode()); |
| effect->setAudioSource(mAudioSource); |
| } |
| // create effect handle and connect it to effect module |
| handle = new EffectHandle(effect, client, effectClient, priority); |
| lStatus = effect->addHandle(handle.get()); |
| if (enabled != NULL) { |
| *enabled = (int)effect->isEnabled(); |
| } |
| } |
| |
| Exit: |
| if (lStatus != NO_ERROR && lStatus != ALREADY_EXISTS) { |
| Mutex::Autolock _l(mLock); |
| if (effectCreated) { |
| chain->removeEffect_l(effect); |
| } |
| if (effectRegistered) { |
| AudioSystem::unregisterEffect(effect->id()); |
| } |
| if (chainCreated) { |
| removeEffectChain_l(chain); |
| } |
| handle.clear(); |
| } |
| |
| if (status != NULL) { |
| *status = lStatus; |
| } |
| return handle; |
| } |
| |
| sp<AudioFlinger::EffectModule> AudioFlinger::ThreadBase::getEffect(int sessionId, int effectId) |
| { |
| Mutex::Autolock _l(mLock); |
| return getEffect_l(sessionId, effectId); |
| } |
| |
| sp<AudioFlinger::EffectModule> AudioFlinger::ThreadBase::getEffect_l(int sessionId, int effectId) |
| { |
| sp<EffectChain> chain = getEffectChain_l(sessionId); |
| return chain != 0 ? chain->getEffectFromId_l(effectId) : 0; |
| } |
| |
| // PlaybackThread::addEffect_l() must be called with AudioFlinger::mLock and |
| // PlaybackThread::mLock held |
| status_t AudioFlinger::ThreadBase::addEffect_l(const sp<EffectModule>& effect) |
| { |
| // check for existing effect chain with the requested audio session |
| int sessionId = effect->sessionId(); |
| sp<EffectChain> chain = getEffectChain_l(sessionId); |
| bool chainCreated = false; |
| |
| if (chain == 0) { |
| // create a new chain for this session |
| ALOGV("addEffect_l() new effect chain for session %d", sessionId); |
| chain = new EffectChain(this, sessionId); |
| addEffectChain_l(chain); |
| chain->setStrategy(getStrategyForSession_l(sessionId)); |
| chainCreated = true; |
| } |
| ALOGV("addEffect_l() %p chain %p effect %p", this, chain.get(), effect.get()); |
| |
| if (chain->getEffectFromId_l(effect->id()) != 0) { |
| ALOGW("addEffect_l() %p effect %s already present in chain %p", |
| this, effect->desc().name, chain.get()); |
| return BAD_VALUE; |
| } |
| |
| status_t status = chain->addEffect_l(effect); |
| if (status != NO_ERROR) { |
| if (chainCreated) { |
| removeEffectChain_l(chain); |
| } |
| return status; |
| } |
| |
| effect->setDevice(mOutDevice); |
| effect->setDevice(mInDevice); |
| effect->setMode(mAudioFlinger->getMode()); |
| effect->setAudioSource(mAudioSource); |
| return NO_ERROR; |
| } |
| |
| void AudioFlinger::ThreadBase::removeEffect_l(const sp<EffectModule>& effect) { |
| |
| ALOGV("removeEffect_l() %p effect %p", this, effect.get()); |
| effect_descriptor_t desc = effect->desc(); |
| if ((desc.flags & EFFECT_FLAG_TYPE_MASK) == EFFECT_FLAG_TYPE_AUXILIARY) { |
| detachAuxEffect_l(effect->id()); |
| } |
| |
| sp<EffectChain> chain = effect->chain().promote(); |
| if (chain != 0) { |
| // remove effect chain if removing last effect |
| if (chain->removeEffect_l(effect) == 0) { |
| removeEffectChain_l(chain); |
| } |
| } else { |
| ALOGW("removeEffect_l() %p cannot promote chain for effect %p", this, effect.get()); |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::lockEffectChains_l( |
| Vector< sp<AudioFlinger::EffectChain> >& effectChains) |
| { |
| effectChains = mEffectChains; |
| for (size_t i = 0; i < mEffectChains.size(); i++) { |
| mEffectChains[i]->lock(); |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::unlockEffectChains( |
| const Vector< sp<AudioFlinger::EffectChain> >& effectChains) |
| { |
| for (size_t i = 0; i < effectChains.size(); i++) { |
| effectChains[i]->unlock(); |
| } |
| } |
| |
| sp<AudioFlinger::EffectChain> AudioFlinger::ThreadBase::getEffectChain(int sessionId) |
| { |
| Mutex::Autolock _l(mLock); |
| return getEffectChain_l(sessionId); |
| } |
| |
| sp<AudioFlinger::EffectChain> AudioFlinger::ThreadBase::getEffectChain_l(int sessionId) const |
| { |
| size_t size = mEffectChains.size(); |
| for (size_t i = 0; i < size; i++) { |
| if (mEffectChains[i]->sessionId() == sessionId) { |
| return mEffectChains[i]; |
| } |
| } |
| return 0; |
| } |
| |
| void AudioFlinger::ThreadBase::setMode(audio_mode_t mode) |
| { |
| Mutex::Autolock _l(mLock); |
| size_t size = mEffectChains.size(); |
| for (size_t i = 0; i < size; i++) { |
| mEffectChains[i]->setMode_l(mode); |
| } |
| } |
| |
| void AudioFlinger::ThreadBase::disconnectEffect(const sp<EffectModule>& effect, |
| EffectHandle *handle, |
| bool unpinIfLast) { |
| |
| Mutex::Autolock _l(mLock); |
| ALOGV("disconnectEffect() %p effect %p", this, effect.get()); |
| // delete the effect module if removing last handle on it |
| if (effect->removeHandle(handle) == 0) { |
| if (!effect->isPinned() || unpinIfLast) { |
| removeEffect_l(effect); |
| AudioSystem::unregisterEffect(effect->id()); |
| } |
| } |
| } |
| |
| // ---------------------------------------------------------------------------- |
| // Playback |
| // ---------------------------------------------------------------------------- |
| |
| AudioFlinger::PlaybackThread::PlaybackThread(const sp<AudioFlinger>& audioFlinger, |
| AudioStreamOut* output, |
| audio_io_handle_t id, |
| audio_devices_t device, |
| type_t type) |
| : ThreadBase(audioFlinger, id, device, AUDIO_DEVICE_NONE, type), |
| mMixBuffer(NULL), mSuspended(0), mBytesWritten(0), |
| // mStreamTypes[] initialized in constructor body |
| mOutput(output), |
| mLastWriteTime(0), mNumWrites(0), mNumDelayedWrites(0), mInWrite(false), |
| mMixerStatus(MIXER_IDLE), |
| mMixerStatusIgnoringFastTracks(MIXER_IDLE), |
| standbyDelay(AudioFlinger::mStandbyTimeInNsecs), |
| mScreenState(AudioFlinger::mScreenState), |
| // index 0 is reserved for normal mixer's submix |
| mFastTrackAvailMask(((1 << FastMixerState::kMaxFastTracks) - 1) & ~1) |
| { |
| snprintf(mName, kNameLength, "AudioOut_%X", id); |
| mNBLogWriter = audioFlinger->newWriter_l(kLogSize, mName); |
| |
| // Assumes constructor is called by AudioFlinger with it's mLock held, but |
| // it would be safer to explicitly pass initial masterVolume/masterMute as |
| // parameter. |
| // |
| // If the HAL we are using has support for master volume or master mute, |
| // then do not attenuate or mute during mixing (just leave the volume at 1.0 |
| // and the mute set to false). |
| mMasterVolume = audioFlinger->masterVolume_l(); |
| mMasterMute = audioFlinger->masterMute_l(); |
| if (mOutput && mOutput->audioHwDev) { |
| if (mOutput->audioHwDev->canSetMasterVolume()) { |
| mMasterVolume = 1.0; |
| } |
| |
| if (mOutput->audioHwDev->canSetMasterMute()) { |
| mMasterMute = false; |
| } |
| } |
| |
| readOutputParameters(); |
| |
| // mStreamTypes[AUDIO_STREAM_CNT] is initialized by stream_type_t default constructor |
| // There is no AUDIO_STREAM_MIN, and ++ operator does not compile |
| for (audio_stream_type_t stream = (audio_stream_type_t) 0; stream < AUDIO_STREAM_CNT; |
| stream = (audio_stream_type_t) (stream + 1)) { |
| mStreamTypes[stream].volume = mAudioFlinger->streamVolume_l(stream); |
| mStreamTypes[stream].mute = mAudioFlinger->streamMute_l(stream); |
| } |
| // mStreamTypes[AUDIO_STREAM_CNT] exists but isn't explicitly initialized here, |
| // because mAudioFlinger doesn't have one to copy from |
| } |
| |
| AudioFlinger::PlaybackThread::~PlaybackThread() |
| { |
| mAudioFlinger->unregisterWriter(mNBLogWriter); |
| delete [] mMixBuffer; |
| } |
| |
| void AudioFlinger::PlaybackThread::dump(int fd, const Vector<String16>& args) |
| { |
| dumpInternals(fd, args); |
| dumpTracks(fd, args); |
| dumpEffectChains(fd, args); |
| } |
| |
| void AudioFlinger::PlaybackThread::dumpTracks(int fd, const Vector<String16>& args) |
| { |
| const size_t SIZE = 256; |
| char buffer[SIZE]; |
| String8 result; |
| |
| result.appendFormat("Output thread %p stream volumes in dB:\n ", this); |
| for (int i = 0; i < AUDIO_STREAM_CNT; ++i) { |
| const stream_type_t *st = &mStreamTypes[i]; |
| if (i > 0) { |
| result.appendFormat(", "); |
| } |
| result.appendFormat("%d:%.2g", i, 20.0 * log10(st->volume)); |
| if (st->mute) { |
| result.append("M"); |
| } |
| } |
| result.append("\n"); |
| write(fd, result.string(), result.length()); |
| result.clear(); |
| |
| snprintf(buffer, SIZE, "Output thread %p tracks\n", this); |
| result.append(buffer); |
| Track::appendDumpHeader(result); |
| for (size_t i = 0; i < mTracks.size(); ++i) { |
| sp<Track> track = mTracks[i]; |
| if (track != 0) { |
| track->dump(buffer, SIZE); |
| result.append(buffer); |
| } |
| } |
| |
| snprintf(buffer, SIZE, "Output thread %p active tracks\n", this); |
| result.append(buffer); |
| Track::appendDumpHeader(result); |
| for (size_t i = 0; i < mActiveTracks.size(); ++i) { |
| sp<Track> track = mActiveTracks[i].promote(); |
| if (track != 0) { |
| track->dump(buffer, SIZE); |
| result.append(buffer); |
| } |
| } |
| write(fd, result.string(), result.size()); |
| |
| // These values are "raw"; they will wrap around. See prepareTracks_l() for a better way. |
| FastTrackUnderruns underruns = getFastTrackUnderruns(0); |
| fdprintf(fd, "Normal mixer raw underrun counters: partial=%u empty=%u\n", |
| underruns.mBitFields.mPartial, underruns.mBitFields.mEmpty); |
| } |
| |
| void AudioFlinger::PlaybackThread::dumpInternals(int fd, const Vector<String16>& args) |
| { |
| const size_t SIZE = 256; |
| char buffer[SIZE]; |
| String8 result; |
| |
| snprintf(buffer, SIZE, "\nOutput thread %p internals\n", this); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "last write occurred (msecs): %llu\n", |
| ns2ms(systemTime() - mLastWriteTime)); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "total writes: %d\n", mNumWrites); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "delayed writes: %d\n", mNumDelayedWrites); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "blocked in write: %d\n", mInWrite); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "suspend count: %d\n", mSuspended); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "mix buffer : %p\n", mMixBuffer); |
| result.append(buffer); |
| write(fd, result.string(), result.size()); |
| fdprintf(fd, "Fast track availMask=%#x\n", mFastTrackAvailMask); |
| |
| dumpBase(fd, args); |
| } |
| |
| // Thread virtuals |
| status_t AudioFlinger::PlaybackThread::readyToRun() |
| { |
| status_t status = initCheck(); |
| if (status == NO_ERROR) { |
| ALOGI("AudioFlinger's thread %p ready to run", this); |
| } else { |
| ALOGE("No working audio driver found."); |
| } |
| return status; |
| } |
| |
| void AudioFlinger::PlaybackThread::onFirstRef() |
| { |
| run(mName, ANDROID_PRIORITY_URGENT_AUDIO); |
| } |
| |
| // ThreadBase virtuals |
| void AudioFlinger::PlaybackThread::preExit() |
| { |
| ALOGV(" preExit()"); |
| // FIXME this is using hard-coded strings but in the future, this functionality will be |
| // converted to use audio HAL extensions required to support tunneling |
| mOutput->stream->common.set_parameters(&mOutput->stream->common, "exiting=1"); |
| } |
| |
| // PlaybackThread::createTrack_l() must be called with AudioFlinger::mLock held |
| sp<AudioFlinger::PlaybackThread::Track> AudioFlinger::PlaybackThread::createTrack_l( |
| const sp<AudioFlinger::Client>& client, |
| audio_stream_type_t streamType, |
| uint32_t sampleRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| size_t frameCount, |
| const sp<IMemory>& sharedBuffer, |
| int sessionId, |
| IAudioFlinger::track_flags_t *flags, |
| pid_t tid, |
| status_t *status) |
| { |
| sp<Track> track; |
| status_t lStatus; |
| |
| bool isTimed = (*flags & IAudioFlinger::TRACK_TIMED) != 0; |
| |
| // client expresses a preference for FAST, but we get the final say |
| if (*flags & IAudioFlinger::TRACK_FAST) { |
| if ( |
| // not timed |
| (!isTimed) && |
| // either of these use cases: |
| ( |
| // use case 1: shared buffer with any frame count |
| ( |
| (sharedBuffer != 0) |
| ) || |
| // use case 2: callback handler and frame count is default or at least as large as HAL |
| ( |
| (tid != -1) && |
| ((frameCount == 0) || |
| (frameCount >= (mFrameCount * kFastTrackMultiplier))) |
| ) |
| ) && |
| // PCM data |
| audio_is_linear_pcm(format) && |
| // mono or stereo |
| ( (channelMask == AUDIO_CHANNEL_OUT_MONO) || |
| (channelMask == AUDIO_CHANNEL_OUT_STEREO) ) && |
| #ifndef FAST_TRACKS_AT_NON_NATIVE_SAMPLE_RATE |
| // hardware sample rate |
| (sampleRate == mSampleRate) && |
| #endif |
| // normal mixer has an associated fast mixer |
| hasFastMixer() && |
| // there are sufficient fast track slots available |
| (mFastTrackAvailMask != 0) |
| // FIXME test that MixerThread for this fast track has a capable output HAL |
| // FIXME add a permission test also? |
| ) { |
| // if frameCount not specified, then it defaults to fast mixer (HAL) frame count |
| if (frameCount == 0) { |
| frameCount = mFrameCount * kFastTrackMultiplier; |
| } |
| ALOGV("AUDIO_OUTPUT_FLAG_FAST accepted: frameCount=%d mFrameCount=%d", |
| frameCount, mFrameCount); |
| } else { |
| ALOGV("AUDIO_OUTPUT_FLAG_FAST denied: isTimed=%d sharedBuffer=%p frameCount=%d " |
| "mFrameCount=%d format=%d isLinear=%d channelMask=%#x sampleRate=%u mSampleRate=%u " |
| "hasFastMixer=%d tid=%d fastTrackAvailMask=%#x", |
| isTimed, sharedBuffer.get(), frameCount, mFrameCount, format, |
| audio_is_linear_pcm(format), |
| channelMask, sampleRate, mSampleRate, hasFastMixer(), tid, mFastTrackAvailMask); |
| *flags &= ~IAudioFlinger::TRACK_FAST; |
| // For compatibility with AudioTrack calculation, buffer depth is forced |
| // to be at least 2 x the normal mixer frame count and cover audio hardware latency. |
| // This is probably too conservative, but legacy application code may depend on it. |
| // If you change this calculation, also review the start threshold which is related. |
| uint32_t latencyMs = mOutput->stream->get_latency(mOutput->stream); |
| uint32_t minBufCount = latencyMs / ((1000 * mNormalFrameCount) / mSampleRate); |
| if (minBufCount < 2) { |
| minBufCount = 2; |
| } |
| size_t minFrameCount = mNormalFrameCount * minBufCount; |
| if (frameCount < minFrameCount) { |
| frameCount = minFrameCount; |
| } |
| } |
| } |
| |
| if (mType == DIRECT) { |
| if ((format & AUDIO_FORMAT_MAIN_MASK) == AUDIO_FORMAT_PCM) { |
| if (sampleRate != mSampleRate || format != mFormat || channelMask != mChannelMask) { |
| ALOGE("createTrack_l() Bad parameter: sampleRate %u format %d, channelMask 0x%08x " |
| "for output %p with format %d", |
| sampleRate, format, channelMask, mOutput, mFormat); |
| lStatus = BAD_VALUE; |
| goto Exit; |
| } |
| } |
| } else { |
| // Resampler implementation limits input sampling rate to 2 x output sampling rate. |
| if (sampleRate > mSampleRate*2) { |
| ALOGE("Sample rate out of range: %u mSampleRate %u", sampleRate, mSampleRate); |
| lStatus = BAD_VALUE; |
| goto Exit; |
| } |
| } |
| |
| lStatus = initCheck(); |
| if (lStatus != NO_ERROR) { |
| ALOGE("Audio driver not initialized."); |
| goto Exit; |
| } |
| |
| { // scope for mLock |
| Mutex::Autolock _l(mLock); |
| |
| // all tracks in same audio session must share the same routing strategy otherwise |
| // conflicts will happen when tracks are moved from one output to another by audio policy |
| // manager |
| uint32_t strategy = AudioSystem::getStrategyForStream(streamType); |
| for (size_t i = 0; i < mTracks.size(); ++i) { |
| sp<Track> t = mTracks[i]; |
| if (t != 0 && !t->isOutputTrack()) { |
| uint32_t actual = AudioSystem::getStrategyForStream(t->streamType()); |
| if (sessionId == t->sessionId() && strategy != actual) { |
| ALOGE("createTrack_l() mismatched strategy; expected %u but found %u", |
| strategy, actual); |
| lStatus = BAD_VALUE; |
| goto Exit; |
| } |
| } |
| } |
| |
| if (!isTimed) { |
| track = new Track(this, client, streamType, sampleRate, format, |
| channelMask, frameCount, sharedBuffer, sessionId, *flags); |
| } else { |
| track = TimedTrack::create(this, client, streamType, sampleRate, format, |
| channelMask, frameCount, sharedBuffer, sessionId); |
| } |
| if (track == 0 || track->getCblk() == NULL || track->name() < 0) { |
| lStatus = NO_MEMORY; |
| goto Exit; |
| } |
| mTracks.add(track); |
| |
| sp<EffectChain> chain = getEffectChain_l(sessionId); |
| if (chain != 0) { |
| ALOGV("createTrack_l() setting main buffer %p", chain->inBuffer()); |
| track->setMainBuffer(chain->inBuffer()); |
| chain->setStrategy(AudioSystem::getStrategyForStream(track->streamType())); |
| chain->incTrackCnt(); |
| } |
| |
| if ((*flags & IAudioFlinger::TRACK_FAST) && (tid != -1)) { |
| pid_t callingPid = IPCThreadState::self()->getCallingPid(); |
| // we don't have CAP_SYS_NICE, nor do we want to have it as it's too powerful, |
| // so ask activity manager to do this on our behalf |
| sendPrioConfigEvent_l(callingPid, tid, kPriorityAudioApp); |
| } |
| } |
| |
| lStatus = NO_ERROR; |
| |
| Exit: |
| if (status) { |
| *status = lStatus; |
| } |
| return track; |
| } |
| |
| uint32_t AudioFlinger::PlaybackThread::correctLatency_l(uint32_t latency) const |
| { |
| return latency; |
| } |
| |
| uint32_t AudioFlinger::PlaybackThread::latency() const |
| { |
| Mutex::Autolock _l(mLock); |
| return latency_l(); |
| } |
| uint32_t AudioFlinger::PlaybackThread::latency_l() const |
| { |
| if (initCheck() == NO_ERROR) { |
| return correctLatency_l(mOutput->stream->get_latency(mOutput->stream)); |
| } else { |
| return 0; |
| } |
| } |
| |
| void AudioFlinger::PlaybackThread::setMasterVolume(float value) |
| { |
| Mutex::Autolock _l(mLock); |
| // Don't apply master volume in SW if our HAL can do it for us. |
| if (mOutput && mOutput->audioHwDev && |
| mOutput->audioHwDev->canSetMasterVolume()) { |
| mMasterVolume = 1.0; |
| } else { |
| mMasterVolume = value; |
| } |
| } |
| |
| void AudioFlinger::PlaybackThread::setMasterMute(bool muted) |
| { |
| Mutex::Autolock _l(mLock); |
| // Don't apply master mute in SW if our HAL can do it for us. |
| if (mOutput && mOutput->audioHwDev && |
| mOutput->audioHwDev->canSetMasterMute()) { |
| mMasterMute = false; |
| } else { |
| mMasterMute = muted; |
| } |
| } |
| |
| void AudioFlinger::PlaybackThread::setStreamVolume(audio_stream_type_t stream, float value) |
| { |
| Mutex::Autolock _l(mLock); |
| mStreamTypes[stream].volume = value; |
| } |
| |
| void AudioFlinger::PlaybackThread::setStreamMute(audio_stream_type_t stream, bool muted) |
| { |
| Mutex::Autolock _l(mLock); |
| mStreamTypes[stream].mute = muted; |
| } |
| |
| float AudioFlinger::PlaybackThread::streamVolume(audio_stream_type_t stream) const |
| { |
| Mutex::Autolock _l(mLock); |
| return mStreamTypes[stream].volume; |
| } |
| |
| // addTrack_l() must be called with ThreadBase::mLock held |
| status_t AudioFlinger::PlaybackThread::addTrack_l(const sp<Track>& track) |
| { |
| status_t status = ALREADY_EXISTS; |
| |
| // set retry count for buffer fill |
| track->mRetryCount = kMaxTrackStartupRetries; |
| if (mActiveTracks.indexOf(track) < 0) { |
| // the track is newly added, make sure it fills up all its |
| // buffers before playing. This is to ensure the client will |
| // effectively get the latency it requested. |
| track->mFillingUpStatus = Track::FS_FILLING; |
| track->mResetDone = false; |
| track->mPresentationCompleteFrames = 0; |
| mActiveTracks.add(track); |
| sp<EffectChain> chain = getEffectChain_l(track->sessionId()); |
| if (chain != 0) { |
| ALOGV("addTrack_l() starting track on chain %p for session %d", chain.get(), |
| track->sessionId()); |
| chain->incActiveTrackCnt(); |
| } |
| |
| status = NO_ERROR; |
| } |
| |
| ALOGV("mWaitWorkCV.broadcast"); |
| mWaitWorkCV.broadcast(); |
| |
| return status; |
| } |
| |
| // destroyTrack_l() must be called with ThreadBase::mLock held |
| void AudioFlinger::PlaybackThread::destroyTrack_l(const sp<Track>& track) |
| { |
| track->mState = TrackBase::TERMINATED; |
| // active tracks are removed by threadLoop() |
| if (mActiveTracks.indexOf(track) < 0) { |
| removeTrack_l(track); |
| } |
| } |
| |
| void AudioFlinger::PlaybackThread::removeTrack_l(const sp<Track>& track) |
| { |
| track->triggerEvents(AudioSystem::SYNC_EVENT_PRESENTATION_COMPLETE); |
| mTracks.remove(track); |
| deleteTrackName_l(track->name()); |
| // redundant as track is about to be destroyed, for dumpsys only |
| track->mName = -1; |
| if (track->isFastTrack()) { |
| int index = track->mFastIndex; |
| ALOG_ASSERT(0 < index && index < (int)FastMixerState::kMaxFastTracks); |
| ALOG_ASSERT(!(mFastTrackAvailMask & (1 << index))); |
| mFastTrackAvailMask |= 1 << index; |
| // redundant as track is about to be destroyed, for dumpsys only |
| track->mFastIndex = -1; |
| } |
| sp<EffectChain> chain = getEffectChain_l(track->sessionId()); |
| if (chain != 0) { |
| chain->decTrackCnt(); |
| } |
| } |
| |
| String8 AudioFlinger::PlaybackThread::getParameters(const String8& keys) |
| { |
| String8 out_s8 = String8(""); |
| char *s; |
| |
| Mutex::Autolock _l(mLock); |
| if (initCheck() != NO_ERROR) { |
| return out_s8; |
| } |
| |
| s = mOutput->stream->common.get_parameters(&mOutput->stream->common, keys.string()); |
| out_s8 = String8(s); |
| free(s); |
| return out_s8; |
| } |
| |
| // audioConfigChanged_l() must be called with AudioFlinger::mLock held |
| void AudioFlinger::PlaybackThread::audioConfigChanged_l(int event, int param) { |
| AudioSystem::OutputDescriptor desc; |
| void *param2 = NULL; |
| |
| ALOGV("PlaybackThread::audioConfigChanged_l, thread %p, event %d, param %d", this, event, |
| param); |
| |
| switch (event) { |
| case AudioSystem::OUTPUT_OPENED: |
| case AudioSystem::OUTPUT_CONFIG_CHANGED: |
| desc.channels = mChannelMask; |
| desc.samplingRate = mSampleRate; |
| desc.format = mFormat; |
| desc.frameCount = mNormalFrameCount; // FIXME see |
| // AudioFlinger::frameCount(audio_io_handle_t) |
| desc.latency = latency(); |
| param2 = &desc; |
| break; |
| |
| case AudioSystem::STREAM_CONFIG_CHANGED: |
| param2 = ¶m; |
| case AudioSystem::OUTPUT_CLOSED: |
| default: |
| break; |
| } |
| mAudioFlinger->audioConfigChanged_l(event, mId, param2); |
| } |
| |
| void AudioFlinger::PlaybackThread::readOutputParameters() |
| { |
| mSampleRate = mOutput->stream->common.get_sample_rate(&mOutput->stream->common); |
| mChannelMask = mOutput->stream->common.get_channels(&mOutput->stream->common); |
| mChannelCount = (uint16_t)popcount(mChannelMask); |
| mFormat = mOutput->stream->common.get_format(&mOutput->stream->common); |
| mFrameSize = audio_stream_frame_size(&mOutput->stream->common); |
| mFrameCount = mOutput->stream->common.get_buffer_size(&mOutput->stream->common) / mFrameSize; |
| if (mFrameCount & 15) { |
| ALOGW("HAL output buffer size is %u frames but AudioMixer requires multiples of 16 frames", |
| mFrameCount); |
| } |
| |
| // Calculate size of normal mix buffer relative to the HAL output buffer size |
| double multiplier = 1.0; |
| if (mType == MIXER && (kUseFastMixer == FastMixer_Static || |
| kUseFastMixer == FastMixer_Dynamic)) { |
| size_t minNormalFrameCount = (kMinNormalMixBufferSizeMs * mSampleRate) / 1000; |
| size_t maxNormalFrameCount = (kMaxNormalMixBufferSizeMs * mSampleRate) / 1000; |
| // round up minimum and round down maximum to nearest 16 frames to satisfy AudioMixer |
| minNormalFrameCount = (minNormalFrameCount + 15) & ~15; |
| maxNormalFrameCount = maxNormalFrameCount & ~15; |
| if (maxNormalFrameCount < minNormalFrameCount) { |
| maxNormalFrameCount = minNormalFrameCount; |
| } |
| multiplier = (double) minNormalFrameCount / (double) mFrameCount; |
| if (multiplier <= 1.0) { |
| multiplier = 1.0; |
| } else if (multiplier <= 2.0) { |
| if (2 * mFrameCount <= maxNormalFrameCount) { |
| multiplier = 2.0; |
| } else { |
| multiplier = (double) maxNormalFrameCount / (double) mFrameCount; |
| } |
| } else { |
| // prefer an even multiplier, for compatibility with doubling of fast tracks due to HAL |
| // SRC (it would be unusual for the normal mix buffer size to not be a multiple of fast |
| // track, but we sometimes have to do this to satisfy the maximum frame count |
| // constraint) |
| // FIXME this rounding up should not be done if no HAL SRC |
| uint32_t truncMult = (uint32_t) multiplier; |
| if ((truncMult & 1)) { |
| if ((truncMult + 1) * mFrameCount <= maxNormalFrameCount) { |
| ++truncMult; |
| } |
| } |
| multiplier = (double) truncMult; |
| } |
| } |
| mNormalFrameCount = multiplier * mFrameCount; |
| // round up to nearest 16 frames to satisfy AudioMixer |
| mNormalFrameCount = (mNormalFrameCount + 15) & ~15; |
| ALOGI("HAL output buffer size %u frames, normal mix buffer size %u frames", mFrameCount, |
| mNormalFrameCount); |
| |
| delete[] mMixBuffer; |
| mMixBuffer = new int16_t[mNormalFrameCount * mChannelCount]; |
| memset(mMixBuffer, 0, mNormalFrameCount * mChannelCount * sizeof(int16_t)); |
| |
| // force reconfiguration of effect chains and engines to take new buffer size and audio |
| // parameters into account |
| // Note that mLock is not held when readOutputParameters() is called from the constructor |
| // but in this case nothing is done below as no audio sessions have effect yet so it doesn't |
| // matter. |
| // create a copy of mEffectChains as calling moveEffectChain_l() can reorder some effect chains |
| Vector< sp<EffectChain> > effectChains = mEffectChains; |
| for (size_t i = 0; i < effectChains.size(); i ++) { |
| mAudioFlinger->moveEffectChain_l(effectChains[i]->sessionId(), this, this, false); |
| } |
| } |
| |
| |
| status_t AudioFlinger::PlaybackThread::getRenderPosition(size_t *halFrames, size_t *dspFrames) |
| { |
| if (halFrames == NULL || dspFrames == NULL) { |
| return BAD_VALUE; |
| } |
| Mutex::Autolock _l(mLock); |
| if (initCheck() != NO_ERROR) { |
| return INVALID_OPERATION; |
| } |
| size_t framesWritten = mBytesWritten / mFrameSize; |
| *halFrames = framesWritten; |
| |
| if (isSuspended()) { |
| // return an estimation of rendered frames when the output is suspended |
| size_t latencyFrames = (latency_l() * mSampleRate) / 1000; |
| *dspFrames = framesWritten >= latencyFrames ? framesWritten - latencyFrames : 0; |
| return NO_ERROR; |
| } else { |
| return mOutput->stream->get_render_position(mOutput->stream, dspFrames); |
| } |
| } |
| |
| uint32_t AudioFlinger::PlaybackThread::hasAudioSession(int sessionId) const |
| { |
| Mutex::Autolock _l(mLock); |
| uint32_t result = 0; |
| if (getEffectChain_l(sessionId) != 0) { |
| result = EFFECT_SESSION; |
| } |
| |
| for (size_t i = 0; i < mTracks.size(); ++i) { |
| sp<Track> track = mTracks[i]; |
| if (sessionId == track->sessionId() && !track->isInvalid()) { |
| result |= TRACK_SESSION; |
| break; |
| } |
| } |
| |
| return result; |
| } |
| |
| uint32_t AudioFlinger::PlaybackThread::getStrategyForSession_l(int sessionId) |
| { |
| // session AUDIO_SESSION_OUTPUT_MIX is placed in same strategy as MUSIC stream so that |
| // it is moved to correct output by audio policy manager when A2DP is connected or disconnected |
| if (sessionId == AUDIO_SESSION_OUTPUT_MIX) { |
| return AudioSystem::getStrategyForStream(AUDIO_STREAM_MUSIC); |
| } |
| for (size_t i = 0; i < mTracks.size(); i++) { |
| sp<Track> track = mTracks[i]; |
| if (sessionId == track->sessionId() && !track->isInvalid()) { |
| return AudioSystem::getStrategyForStream(track->streamType()); |
| } |
| } |
| return AudioSystem::getStrategyForStream(AUDIO_STREAM_MUSIC); |
| } |
| |
| |
| AudioFlinger::AudioStreamOut* AudioFlinger::PlaybackThread::getOutput() const |
| { |
| Mutex::Autolock _l(mLock); |
| return mOutput; |
| } |
| |
| AudioFlinger::AudioStreamOut* AudioFlinger::PlaybackThread::clearOutput() |
| { |
| Mutex::Autolock _l(mLock); |
| AudioStreamOut *output = mOutput; |
| mOutput = NULL; |
| // FIXME FastMixer might also have a raw ptr to mOutputSink; |
| // must push a NULL and wait for ack |
| mOutputSink.clear(); |
| mPipeSink.clear(); |
| mNormalSink.clear(); |
| return output; |
| } |
| |
| // this method must always be called either with ThreadBase mLock held or inside the thread loop |
| audio_stream_t* AudioFlinger::PlaybackThread::stream() const |
| { |
| if (mOutput == NULL) { |
| return NULL; |
| } |
| return &mOutput->stream->common; |
| } |
| |
| uint32_t AudioFlinger::PlaybackThread::activeSleepTimeUs() const |
| { |
| return (uint32_t)((uint32_t)((mNormalFrameCount * 1000) / mSampleRate) * 1000); |
| } |
| |
| status_t AudioFlinger::PlaybackThread::setSyncEvent(const sp<SyncEvent>& event) |
| { |
| if (!isValidSyncEvent(event)) { |
| return BAD_VALUE; |
| } |
| |
| Mutex::Autolock _l(mLock); |
| |
| for (size_t i = 0; i < mTracks.size(); ++i) { |
| sp<Track> track = mTracks[i]; |
| if (event->triggerSession() == track->sessionId()) { |
| (void) track->setSyncEvent(event); |
| return NO_ERROR; |
| } |
| } |
| |
| return NAME_NOT_FOUND; |
| } |
| |
| bool AudioFlinger::PlaybackThread::isValidSyncEvent(const sp<SyncEvent>& event) const |
| { |
| return event->type() == AudioSystem::SYNC_EVENT_PRESENTATION_COMPLETE; |
| } |
| |
| void AudioFlinger::PlaybackThread::threadLoop_removeTracks( |
| const Vector< sp<Track> >& tracksToRemove) |
| { |
| size_t count = tracksToRemove.size(); |
| if (CC_UNLIKELY(count)) { |
| for (size_t i = 0 ; i < count ; i++) { |
| const sp<Track>& track = tracksToRemove.itemAt(i); |
| if ((track->sharedBuffer() != 0) && |
| (track->mState == TrackBase::ACTIVE || track->mState == TrackBase::RESUMING)) { |
| AudioSystem::stopOutput(mId, track->streamType(), track->sessionId()); |
| } |
| } |
| } |
| |
| } |
| |
| void AudioFlinger::PlaybackThread::checkSilentMode_l() |
| { |
| if (!mMasterMute) { |
| char value[PROPERTY_VALUE_MAX]; |
| if (property_get("ro.audio.silent", value, "0") > 0) { |
| char *endptr; |
| unsigned long ul = strtoul(value, &endptr, 0); |
| if (*endptr == '\0' && ul != 0) { |
| ALOGD("Silence is golden"); |
| // The setprop command will not allow a property to be changed after |
| // the first time it is set, so we don't have to worry about un-muting. |
| setMasterMute_l(true); |
| } |
| } |
| } |
| } |
| |
| // shared by MIXER and DIRECT, overridden by DUPLICATING |
| void AudioFlinger::PlaybackThread::threadLoop_write() |
| { |
| // FIXME rewrite to reduce number of system calls |
| mLastWriteTime = systemTime(); |
| mInWrite = true; |
| int bytesWritten; |
| |
| // If an NBAIO sink is present, use it to write the normal mixer's submix |
| if (mNormalSink != 0) { |
| #define mBitShift 2 // FIXME |
| size_t count = mixBufferSize >> mBitShift; |
| ATRACE_BEGIN("write"); |
| // update the setpoint when AudioFlinger::mScreenState changes |
| uint32_t screenState = AudioFlinger::mScreenState; |
| if (screenState != mScreenState) { |
| mScreenState = screenState; |
| MonoPipe *pipe = (MonoPipe *)mPipeSink.get(); |
| if (pipe != NULL) { |
| pipe->setAvgFrames((mScreenState & 1) ? |
| (pipe->maxFrames() * 7) / 8 : mNormalFrameCount * 2); |
| } |
| } |
| ssize_t framesWritten = mNormalSink->write(mMixBuffer, count); |
| ATRACE_END(); |
| if (framesWritten > 0) { |
| bytesWritten = framesWritten << mBitShift; |
| } else { |
| bytesWritten = framesWritten; |
| } |
| // otherwise use the HAL / AudioStreamOut directly |
| } else { |
| // Direct output thread. |
| bytesWritten = (int)mOutput->stream->write(mOutput->stream, mMixBuffer, mixBufferSize); |
| } |
| |
| if (bytesWritten > 0) { |
| mBytesWritten += mixBufferSize; |
| } |
| mNumWrites++; |
| mInWrite = false; |
| } |
| |
| /* |
| The derived values that are cached: |
| - mixBufferSize from frame count * frame size |
| - activeSleepTime from activeSleepTimeUs() |
| - idleSleepTime from idleSleepTimeUs() |
| - standbyDelay from mActiveSleepTimeUs (DIRECT only) |
| - maxPeriod from frame count and sample rate (MIXER only) |
| |
| The parameters that affect these derived values are: |
| - frame count |
| - frame size |
| - sample rate |
| - device type: A2DP or not |
| - device latency |
| - format: PCM or not |
| - active sleep time |
| - idle sleep time |
| */ |
| |
| void AudioFlinger::PlaybackThread::cacheParameters_l() |
| { |
| mixBufferSize = mNormalFrameCount * mFrameSize; |
| activeSleepTime = activeSleepTimeUs(); |
| idleSleepTime = idleSleepTimeUs(); |
| } |
| |
| void AudioFlinger::PlaybackThread::invalidateTracks(audio_stream_type_t streamType) |
| { |
| ALOGV ("MixerThread::invalidateTracks() mixer %p, streamType %d, mTracks.size %d", |
| this, streamType, mTracks.size()); |
| Mutex::Autolock _l(mLock); |
| |
| size_t size = mTracks.size(); |
| for (size_t i = 0; i < size; i++) { |
| sp<Track> t = mTracks[i]; |
| if (t->streamType() == streamType) { |
| t->invalidate(); |
| } |
| } |
| } |
| |
| status_t AudioFlinger::PlaybackThread::addEffectChain_l(const sp<EffectChain>& chain) |
| { |
| int session = chain->sessionId(); |
| int16_t *buffer = mMixBuffer; |
| bool ownsBuffer = false; |
| |
| ALOGV("addEffectChain_l() %p on thread %p for session %d", chain.get(), this, session); |
| if (session > 0) { |
| // Only one effect chain can be present in direct output thread and it uses |
| // the mix buffer as input |
| if (mType != DIRECT) { |
| size_t numSamples = mNormalFrameCount * mChannelCount; |
| buffer = new int16_t[numSamples]; |
| memset(buffer, 0, numSamples * sizeof(int16_t)); |
| ALOGV("addEffectChain_l() creating new input buffer %p session %d", buffer, session); |
| ownsBuffer = true; |
| } |
| |
| // Attach all tracks with same session ID to this chain. |
| for (size_t i = 0; i < mTracks.size(); ++i) { |
| sp<Track> track = mTracks[i]; |
| if (session == track->sessionId()) { |
| ALOGV("addEffectChain_l() track->setMainBuffer track %p buffer %p", track.get(), |
| buffer); |
| track->setMainBuffer(buffer); |
| chain->incTrackCnt(); |
| } |
| } |
| |
| // indicate all active tracks in the chain |
| for (size_t i = 0 ; i < mActiveTracks.size() ; ++i) { |
| sp<Track> track = mActiveTracks[i].promote(); |
| if (track == 0) { |
| continue; |
| } |
| if (session == track->sessionId()) { |
| ALOGV("addEffectChain_l() activating track %p on session %d", track.get(), session); |
| chain->incActiveTrackCnt(); |
| } |
| } |
| } |
| |
| chain->setInBuffer(buffer, ownsBuffer); |
| chain->setOutBuffer(mMixBuffer); |
| // Effect chain for session AUDIO_SESSION_OUTPUT_STAGE is inserted at end of effect |
| // chains list in order to be processed last as it contains output stage effects |
| // Effect chain for session AUDIO_SESSION_OUTPUT_MIX is inserted before |
| // session AUDIO_SESSION_OUTPUT_STAGE to be processed |
| // after track specific effects and before output stage |
| // It is therefore mandatory that AUDIO_SESSION_OUTPUT_MIX == 0 and |
| // that AUDIO_SESSION_OUTPUT_STAGE < AUDIO_SESSION_OUTPUT_MIX |
| // Effect chain for other sessions are inserted at beginning of effect |
| // chains list to be processed before output mix effects. Relative order between other |
| // sessions is not important |
| size_t size = mEffectChains.size(); |
| size_t i = 0; |
| for (i = 0; i < size; i++) { |
| if (mEffectChains[i]->sessionId() < session) { |
| break; |
| } |
| } |
| mEffectChains.insertAt(chain, i); |
| checkSuspendOnAddEffectChain_l(chain); |
| |
| return NO_ERROR; |
| } |
| |
| size_t AudioFlinger::PlaybackThread::removeEffectChain_l(const sp<EffectChain>& chain) |
| { |
| int session = chain->sessionId(); |
| |
| ALOGV("removeEffectChain_l() %p from thread %p for session %d", chain.get(), this, session); |
| |
| for (size_t i = 0; i < mEffectChains.size(); i++) { |
| if (chain == mEffectChains[i]) { |
| mEffectChains.removeAt(i); |
| // detach all active tracks from the chain |
| for (size_t i = 0 ; i < mActiveTracks.size() ; ++i) { |
| sp<Track> track = mActiveTracks[i].promote(); |
| if (track == 0) { |
| continue; |
| } |
| if (session == track->sessionId()) { |
| ALOGV("removeEffectChain_l(): stopping track on chain %p for session Id: %d", |
| chain.get(), session); |
| chain->decActiveTrackCnt(); |
| } |
| } |
| |
| // detach all tracks with same session ID from this chain |
| for (size_t i = 0; i < mTracks.size(); ++i) { |
| sp<Track> track = mTracks[i]; |
| if (session == track->sessionId()) { |
| track->setMainBuffer(mMixBuffer); |
| chain->decTrackCnt(); |
| } |
| } |
| break; |
| } |
| } |
| return mEffectChains.size(); |
| } |
| |
| status_t AudioFlinger::PlaybackThread::attachAuxEffect( |
| const sp<AudioFlinger::PlaybackThread::Track> track, int EffectId) |
| { |
| Mutex::Autolock _l(mLock); |
| return attachAuxEffect_l(track, EffectId); |
| } |
| |
| status_t AudioFlinger::PlaybackThread::attachAuxEffect_l( |
| const sp<AudioFlinger::PlaybackThread::Track> track, int EffectId) |
| { |
| status_t status = NO_ERROR; |
| |
| if (EffectId == 0) { |
| track->setAuxBuffer(0, NULL); |
| } else { |
| // Auxiliary effects are always in audio session AUDIO_SESSION_OUTPUT_MIX |
| sp<EffectModule> effect = getEffect_l(AUDIO_SESSION_OUTPUT_MIX, EffectId); |
| if (effect != 0) { |
| if ((effect->desc().flags & EFFECT_FLAG_TYPE_MASK) == EFFECT_FLAG_TYPE_AUXILIARY) { |
| track->setAuxBuffer(EffectId, (int32_t *)effect->inBuffer()); |
| } else { |
| status = INVALID_OPERATION; |
| } |
| } else { |
| status = BAD_VALUE; |
| } |
| } |
| return status; |
| } |
| |
| void AudioFlinger::PlaybackThread::detachAuxEffect_l(int effectId) |
| { |
| for (size_t i = 0; i < mTracks.size(); ++i) { |
| sp<Track> track = mTracks[i]; |
| if (track->auxEffectId() == effectId) { |
| attachAuxEffect_l(track, 0); |
| } |
| } |
| } |
| |
| bool AudioFlinger::PlaybackThread::threadLoop() |
| { |
| Vector< sp<Track> > tracksToRemove; |
| |
| standbyTime = systemTime(); |
| |
| // MIXER |
| nsecs_t lastWarning = 0; |
| |
| // DUPLICATING |
| // FIXME could this be made local to while loop? |
| writeFrames = 0; |
| |
| cacheParameters_l(); |
| sleepTime = idleSleepTime; |
| |
| if (mType == MIXER) { |
| sleepTimeShift = 0; |
| } |
| |
| CpuStats cpuStats; |
| const String8 myName(String8::format("thread %p type %d TID %d", this, mType, gettid())); |
| |
| acquireWakeLock(); |
| |
| // mNBLogWriter->log can only be called while thread mutex mLock is held. |
| // So if you need to log when mutex is unlocked, set logString to a non-NULL string, |
| // and then that string will be logged at the next convenient opportunity. |
| const char *logString = NULL; |
| |
| while (!exitPending()) |
| { |
| cpuStats.sample(myName); |
| |
| Vector< sp<EffectChain> > effectChains; |
| |
| processConfigEvents(); |
| |
| { // scope for mLock |
| |
| Mutex::Autolock _l(mLock); |
| |
| if (logString != NULL) { |
| mNBLogWriter->logTimestamp(); |
| mNBLogWriter->log(logString); |
| logString = NULL; |
| } |
| |
| if (checkForNewParameters_l()) { |
| cacheParameters_l(); |
| } |
| |
| saveOutputTracks(); |
| |
| // put audio hardware into standby after short delay |
| if (CC_UNLIKELY((!mActiveTracks.size() && systemTime() > standbyTime) || |
| isSuspended())) { |
| if (!mStandby) { |
| |
| threadLoop_standby(); |
| |
| mStandby = true; |
| } |
| |
| if (!mActiveTracks.size() && mConfigEvents.isEmpty()) { |
| // we're about to wait, flush the binder command buffer |
| IPCThreadState::self()->flushCommands(); |
| |
| clearOutputTracks(); |
| |
| if (exitPending()) { |
| break; |
| } |
| |
| releaseWakeLock_l(); |
| // wait until we have something to do... |
| ALOGV("%s going to sleep", myName.string()); |
| mWaitWorkCV.wait(mLock); |
| ALOGV("%s waking up", myName.string()); |
| acquireWakeLock_l(); |
| |
| mMixerStatus = MIXER_IDLE; |
| mMixerStatusIgnoringFastTracks = MIXER_IDLE; |
| mBytesWritten = 0; |
| |
| checkSilentMode_l(); |
| |
| standbyTime = systemTime() + standbyDelay; |
| sleepTime = idleSleepTime; |
| if (mType == MIXER) { |
| sleepTimeShift = 0; |
| } |
| |
| continue; |
| } |
| } |
| |
| // mMixerStatusIgnoringFastTracks is also updated internally |
| mMixerStatus = prepareTracks_l(&tracksToRemove); |
| |
| // prevent any changes in effect chain list and in each effect chain |
| // during mixing and effect process as the audio buffers could be deleted |
| // or modified if an effect is created or deleted |
| lockEffectChains_l(effectChains); |
| } |
| |
| if (CC_LIKELY(mMixerStatus == MIXER_TRACKS_READY)) { |
| threadLoop_mix(); |
| } else { |
| threadLoop_sleepTime(); |
| } |
| |
| if (isSuspended()) { |
| sleepTime = suspendSleepTimeUs(); |
| mBytesWritten += mixBufferSize; |
| } |
| |
| // only process effects if we're going to write |
| if (sleepTime == 0) { |
| for (size_t i = 0; i < effectChains.size(); i ++) { |
| effectChains[i]->process_l(); |
| } |
| } |
| |
| // enable changes in effect chain |
| unlockEffectChains(effectChains); |
| |
| // sleepTime == 0 means we must write to audio hardware |
| if (sleepTime == 0) { |
| |
| threadLoop_write(); |
| |
| if (mType == MIXER) { |
| // write blocked detection |
| nsecs_t now = systemTime(); |
| nsecs_t delta = now - mLastWriteTime; |
| if (!mStandby && delta > maxPeriod) { |
| mNumDelayedWrites++; |
| if ((now - lastWarning) > kWarningThrottleNs) { |
| ATRACE_NAME("underrun"); |
| ALOGW("write blocked for %llu msecs, %d delayed writes, thread %p", |
| ns2ms(delta), mNumDelayedWrites, this); |
| lastWarning = now; |
| } |
| } |
| } |
| |
| mStandby = false; |
| } else { |
| usleep(sleepTime); |
| } |
| |
| // Finally let go of removed track(s), without the lock held |
| // since we can't guarantee the destructors won't acquire that |
| // same lock. This will also mutate and push a new fast mixer state. |
| threadLoop_removeTracks(tracksToRemove); |
| tracksToRemove.clear(); |
| |
| // FIXME I don't understand the need for this here; |
| // it was in the original code but maybe the |
| // assignment in saveOutputTracks() makes this unnecessary? |
| clearOutputTracks(); |
| |
| // Effect chains will be actually deleted here if they were removed from |
| // mEffectChains list during mixing or effects processing |
| effectChains.clear(); |
| |
| // FIXME Note that the above .clear() is no longer necessary since effectChains |
| // is now local to this block, but will keep it for now (at least until merge done). |
| } |
| |
| // for DuplicatingThread, standby mode is handled by the outputTracks, otherwise ... |
| if (mType == MIXER || mType == DIRECT) { |
| // put output stream into standby mode |
| if (!mStandby) { |
| mOutput->stream->common.standby(&mOutput->stream->common); |
| } |
| } |
| |
| releaseWakeLock(); |
| |
| ALOGV("Thread %p type %d exiting", this, mType); |
| return false; |
| } |
| |
| |
| // ---------------------------------------------------------------------------- |
| |
| AudioFlinger::MixerThread::MixerThread(const sp<AudioFlinger>& audioFlinger, AudioStreamOut* output, |
| audio_io_handle_t id, audio_devices_t device, type_t type) |
| : PlaybackThread(audioFlinger, output, id, device, type), |
| // mAudioMixer below |
| // mFastMixer below |
| mFastMixerFutex(0) |
| // mOutputSink below |
| // mPipeSink below |
| // mNormalSink below |
| { |
| ALOGV("MixerThread() id=%d device=%#x type=%d", id, device, type); |
| ALOGV("mSampleRate=%u, mChannelMask=%#x, mChannelCount=%d, mFormat=%d, mFrameSize=%u, " |
| "mFrameCount=%d, mNormalFrameCount=%d", |
| mSampleRate, mChannelMask, mChannelCount, mFormat, mFrameSize, mFrameCount, |
| mNormalFrameCount); |
| mAudioMixer = new AudioMixer(mNormalFrameCount, mSampleRate); |
| |
| // FIXME - Current mixer implementation only supports stereo output |
| if (mChannelCount != FCC_2) { |
| ALOGE("Invalid audio hardware channel count %d", mChannelCount); |
| } |
| |
| // create an NBAIO sink for the HAL output stream, and negotiate |
| mOutputSink = new AudioStreamOutSink(output->stream); |
| size_t numCounterOffers = 0; |
| const NBAIO_Format offers[1] = {Format_from_SR_C(mSampleRate, mChannelCount)}; |
| ssize_t index = mOutputSink->negotiate(offers, 1, NULL, numCounterOffers); |
| ALOG_ASSERT(index == 0); |
| |
| // initialize fast mixer depending on configuration |
| bool initFastMixer; |
| switch (kUseFastMixer) { |
| case FastMixer_Never: |
| initFastMixer = false; |
| break; |
| case FastMixer_Always: |
| initFastMixer = true; |
| break; |
| case FastMixer_Static: |
| case FastMixer_Dynamic: |
| initFastMixer = mFrameCount < mNormalFrameCount; |
| break; |
| } |
| if (initFastMixer) { |
| |
| // create a MonoPipe to connect our submix to FastMixer |
| NBAIO_Format format = mOutputSink->format(); |
| // This pipe depth compensates for scheduling latency of the normal mixer thread. |
| // When it wakes up after a maximum latency, it runs a few cycles quickly before |
| // finally blocking. Note the pipe implementation rounds up the request to a power of 2. |
| MonoPipe *monoPipe = new MonoPipe(mNormalFrameCount * 4, format, true /*writeCanBlock*/); |
| const NBAIO_Format offers[1] = {format}; |
| size_t numCounterOffers = 0; |
| ssize_t index = monoPipe->negotiate(offers, 1, NULL, numCounterOffers); |
| ALOG_ASSERT(index == 0); |
| monoPipe->setAvgFrames((mScreenState & 1) ? |
| (monoPipe->maxFrames() * 7) / 8 : mNormalFrameCount * 2); |
| mPipeSink = monoPipe; |
| |
| #ifdef TEE_SINK |
| if (mTeeSinkOutputEnabled) { |
| // create a Pipe to archive a copy of FastMixer's output for dumpsys |
| Pipe *teeSink = new Pipe(mTeeSinkOutputFrames, format); |
| numCounterOffers = 0; |
| index = teeSink->negotiate(offers, 1, NULL, numCounterOffers); |
| ALOG_ASSERT(index == 0); |
| mTeeSink = teeSink; |
| PipeReader *teeSource = new PipeReader(*teeSink); |
| numCounterOffers = 0; |
| index = teeSource->negotiate(offers, 1, NULL, numCounterOffers); |
| ALOG_ASSERT(index == 0); |
| mTeeSource = teeSource; |
| } |
| #endif |
| |
| // create fast mixer and configure it initially with just one fast track for our submix |
| mFastMixer = new FastMixer(); |
| FastMixerStateQueue *sq = mFastMixer->sq(); |
| #ifdef STATE_QUEUE_DUMP |
| sq->setObserverDump(&mStateQueueObserverDump); |
| sq->setMutatorDump(&mStateQueueMutatorDump); |
| #endif |
| FastMixerState *state = sq->begin(); |
| FastTrack *fastTrack = &state->mFastTracks[0]; |
| // wrap the source side of the MonoPipe to make it an AudioBufferProvider |
| fastTrack->mBufferProvider = new SourceAudioBufferProvider(new MonoPipeReader(monoPipe)); |
| fastTrack->mVolumeProvider = NULL; |
| fastTrack->mGeneration++; |
| state->mFastTracksGen++; |
| state->mTrackMask = 1; |
| // fast mixer will use the HAL output sink |
| state->mOutputSink = mOutputSink.get(); |
| state->mOutputSinkGen++; |
| state->mFrameCount = mFrameCount; |
| state->mCommand = FastMixerState::COLD_IDLE; |
| // already done in constructor initialization list |
| //mFastMixerFutex = 0; |
| state->mColdFutexAddr = &mFastMixerFutex; |
| state->mColdGen++; |
| state->mDumpState = &mFastMixerDumpState; |
| #ifdef TEE_SINK |
| state->mTeeSink = mTeeSink.get(); |
| #endif |
| mFastMixerNBLogWriter = audioFlinger->newWriter_l(kFastMixerLogSize, "FastMixer"); |
| state->mNBLogWriter = mFastMixerNBLogWriter.get(); |
| sq->end(); |
| sq->push(FastMixerStateQueue::BLOCK_UNTIL_PUSHED); |
| |
| // start the fast mixer |
| mFastMixer->run("FastMixer", PRIORITY_URGENT_AUDIO); |
| pid_t tid = mFastMixer->getTid(); |
| int err = requestPriority(getpid_cached, tid, kPriorityFastMixer); |
| if (err != 0) { |
| ALOGW("Policy SCHED_FIFO priority %d is unavailable for pid %d tid %d; error %d", |
| kPriorityFastMixer, getpid_cached, tid, err); |
| } |
| |
| #ifdef AUDIO_WATCHDOG |
| // create and start the watchdog |
| mAudioWatchdog = new AudioWatchdog(); |
| mAudioWatchdog->setDump(&mAudioWatchdogDump); |
| mAudioWatchdog->run("AudioWatchdog", PRIORITY_URGENT_AUDIO); |
| tid = mAudioWatchdog->getTid(); |
| err = requestPriority(getpid_cached, tid, kPriorityFastMixer); |
| if (err != 0) { |
| ALOGW("Policy SCHED_FIFO priority %d is unavailable for pid %d tid %d; error %d", |
| kPriorityFastMixer, getpid_cached, tid, err); |
| } |
| #endif |
| |
| } else { |
| mFastMixer = NULL; |
| } |
| |
| switch (kUseFastMixer) { |
| case FastMixer_Never: |
| case FastMixer_Dynamic: |
| mNormalSink = mOutputSink; |
| break; |
| case FastMixer_Always: |
| mNormalSink = mPipeSink; |
| break; |
| case FastMixer_Static: |
| mNormalSink = initFastMixer ? mPipeSink : mOutputSink; |
| break; |
| } |
| } |
| |
| AudioFlinger::MixerThread::~MixerThread() |
| { |
| if (mFastMixer != NULL) { |
| FastMixerStateQueue *sq = mFastMixer->sq(); |
| FastMixerState *state = sq->begin(); |
| if (state->mCommand == FastMixerState::COLD_IDLE) { |
| int32_t old = android_atomic_inc(&mFastMixerFutex); |
| if (old == -1) { |
| __futex_syscall3(&mFastMixerFutex, FUTEX_WAKE_PRIVATE, 1); |
| } |
| } |
| state->mCommand = FastMixerState::EXIT; |
| sq->end(); |
| sq->push(FastMixerStateQueue::BLOCK_UNTIL_PUSHED); |
| mFastMixer->join(); |
| // Though the fast mixer thread has exited, it's state queue is still valid. |
| // We'll use that extract the final state which contains one remaining fast track |
| // corresponding to our sub-mix. |
| state = sq->begin(); |
| ALOG_ASSERT(state->mTrackMask == 1); |
| FastTrack *fastTrack = &state->mFastTracks[0]; |
| ALOG_ASSERT(fastTrack->mBufferProvider != NULL); |
| delete fastTrack->mBufferProvider; |
| sq->end(false /*didModify*/); |
| delete mFastMixer; |
| #ifdef AUDIO_WATCHDOG |
| if (mAudioWatchdog != 0) { |
| mAudioWatchdog->requestExit(); |
| mAudioWatchdog->requestExitAndWait(); |
| mAudioWatchdog.clear(); |
| } |
| #endif |
| } |
| mAudioFlinger->unregisterWriter(mFastMixerNBLogWriter); |
| delete mAudioMixer; |
| } |
| |
| |
| uint32_t AudioFlinger::MixerThread::correctLatency_l(uint32_t latency) const |
| { |
| if (mFastMixer != NULL) { |
| MonoPipe *pipe = (MonoPipe *)mPipeSink.get(); |
| latency += (pipe->getAvgFrames() * 1000) / mSampleRate; |
| } |
| return latency; |
| } |
| |
| |
| void AudioFlinger::MixerThread::threadLoop_removeTracks(const Vector< sp<Track> >& tracksToRemove) |
| { |
| PlaybackThread::threadLoop_removeTracks(tracksToRemove); |
| } |
| |
| void AudioFlinger::MixerThread::threadLoop_write() |
| { |
| // FIXME we should only do one push per cycle; confirm this is true |
| // Start the fast mixer if it's not already running |
| if (mFastMixer != NULL) { |
| FastMixerStateQueue *sq = mFastMixer->sq(); |
| FastMixerState *state = sq->begin(); |
| if (state->mCommand != FastMixerState::MIX_WRITE && |
| (kUseFastMixer != FastMixer_Dynamic || state->mTrackMask > 1)) { |
| if (state->mCommand == FastMixerState::COLD_IDLE) { |
| int32_t old = android_atomic_inc(&mFastMixerFutex); |
| if (old == -1) { |
| __futex_syscall3(&mFastMixerFutex, FUTEX_WAKE_PRIVATE, 1); |
| } |
| #ifdef AUDIO_WATCHDOG |
| if (mAudioWatchdog != 0) { |
| mAudioWatchdog->resume(); |
| } |
| #endif |
| } |
| state->mCommand = FastMixerState::MIX_WRITE; |
| sq->end(); |
| sq->push(FastMixerStateQueue::BLOCK_UNTIL_PUSHED); |
| if (kUseFastMixer == FastMixer_Dynamic) { |
| mNormalSink = mPipeSink; |
| } |
| } else { |
| sq->end(false /*didModify*/); |
| } |
| } |
| PlaybackThread::threadLoop_write(); |
| } |
| |
| void AudioFlinger::MixerThread::threadLoop_standby() |
| { |
| // Idle the fast mixer if it's currently running |
| if (mFastMixer != NULL) { |
| FastMixerStateQueue *sq = mFastMixer->sq(); |
| FastMixerState *state = sq->begin(); |
| if (!(state->mCommand & FastMixerState::IDLE)) { |
| state->mCommand = FastMixerState::COLD_IDLE; |
| state->mColdFutexAddr = &mFastMixerFutex; |
| state->mColdGen++; |
| mFastMixerFutex = 0; |
| sq->end(); |
| // BLOCK_UNTIL_PUSHED would be insufficient, as we need it to stop doing I/O now |
| sq->push(FastMixerStateQueue::BLOCK_UNTIL_ACKED); |
| if (kUseFastMixer == FastMixer_Dynamic) { |
| mNormalSink = mOutputSink; |
| } |
| #ifdef AUDIO_WATCHDOG |
| if (mAudioWatchdog != 0) { |
| mAudioWatchdog->pause(); |
| } |
| #endif |
| } else { |
| sq->end(false /*didModify*/); |
| } |
| } |
| PlaybackThread::threadLoop_standby(); |
| } |
| |
| // shared by MIXER and DIRECT, overridden by DUPLICATING |
| void AudioFlinger::PlaybackThread::threadLoop_standby() |
| { |
| ALOGV("Audio hardware entering standby, mixer %p, suspend count %d", this, mSuspended); |
| mOutput->stream->common.standby(&mOutput->stream->common); |
| } |
| |
| void AudioFlinger::MixerThread::threadLoop_mix() |
| { |
| // obtain the presentation timestamp of the next output buffer |
| int64_t pts; |
| status_t status = INVALID_OPERATION; |
| |
| if (mNormalSink != 0) { |
| status = mNormalSink->getNextWriteTimestamp(&pts); |
| } else { |
| status = mOutputSink->getNextWriteTimestamp(&pts); |
| } |
| |
| if (status != NO_ERROR) { |
| pts = AudioBufferProvider::kInvalidPTS; |
| } |
| |
| // mix buffers... |
| mAudioMixer->process(pts); |
| // increase sleep time progressively when application underrun condition clears. |
| // Only increase sleep time if the mixer is ready for two consecutive times to avoid |
| // that a steady state of alternating ready/not ready conditions keeps the sleep time |
| // such that we would underrun the audio HAL. |
| if ((sleepTime == 0) && (sleepTimeShift > 0)) { |
| sleepTimeShift--; |
| } |
| sleepTime = 0; |
| standbyTime = systemTime() + standbyDelay; |
| //TODO: delay standby when effects have a tail |
| } |
| |
| void AudioFlinger::MixerThread::threadLoop_sleepTime() |
| { |
| // If no tracks are ready, sleep once for the duration of an output |
| // buffer size, then write 0s to the output |
| if (sleepTime == 0) { |
| if (mMixerStatus == MIXER_TRACKS_ENABLED) { |
| sleepTime = activeSleepTime >> sleepTimeShift; |
| if (sleepTime < kMinThreadSleepTimeUs) { |
| sleepTime = kMinThreadSleepTimeUs; |
| } |
| // reduce sleep time in case of consecutive application underruns to avoid |
| // starving the audio HAL. As activeSleepTimeUs() is larger than a buffer |
| // duration we would end up writing less data than needed by the audio HAL if |
| // the condition persists. |
| if (sleepTimeShift < kMaxThreadSleepTimeShift) { |
| sleepTimeShift++; |
| } |
| } else { |
| sleepTime = idleSleepTime; |
| } |
| } else if (mBytesWritten != 0 || (mMixerStatus == MIXER_TRACKS_ENABLED)) { |
| memset (mMixBuffer, 0, mixBufferSize); |
| sleepTime = 0; |
| ALOGV_IF(mBytesWritten == 0 && (mMixerStatus == MIXER_TRACKS_ENABLED), |
| "anticipated start"); |
| } |
| // TODO add standby time extension fct of effect tail |
| } |
| |
| // prepareTracks_l() must be called with ThreadBase::mLock held |
| AudioFlinger::PlaybackThread::mixer_state AudioFlinger::MixerThread::prepareTracks_l( |
| Vector< sp<Track> > *tracksToRemove) |
| { |
| |
| mixer_state mixerStatus = MIXER_IDLE; |
| // find out which tracks need to be processed |
| size_t count = mActiveTracks.size(); |
| size_t mixedTracks = 0; |
| size_t tracksWithEffect = 0; |
| // counts only _active_ fast tracks |
| size_t fastTracks = 0; |
| uint32_t resetMask = 0; // bit mask of fast tracks that need to be reset |
| |
| float masterVolume = mMasterVolume; |
| bool masterMute = mMasterMute; |
| |
| if (masterMute) { |
| masterVolume = 0; |
| } |
| // Delegate master volume control to effect in output mix effect chain if needed |
| sp<EffectChain> chain = getEffectChain_l(AUDIO_SESSION_OUTPUT_MIX); |
| if (chain != 0) { |
| uint32_t v = (uint32_t)(masterVolume * (1 << 24)); |
| chain->setVolume_l(&v, &v); |
| masterVolume = (float)((v + (1 << 23)) >> 24); |
| chain.clear(); |
| } |
| |
| // prepare a new state to push |
| FastMixerStateQueue *sq = NULL; |
| FastMixerState *state = NULL; |
| bool didModify = false; |
| FastMixerStateQueue::block_t block = FastMixerStateQueue::BLOCK_UNTIL_PUSHED; |
| if (mFastMixer != NULL) { |
| sq = mFastMixer->sq(); |
| state = sq->begin(); |
| } |
| |
| for (size_t i=0 ; i<count ; i++) { |
| sp<Track> t = mActiveTracks[i].promote(); |
| if (t == 0) { |
| continue; |
| } |
| |
| // this const just means the local variable doesn't change |
| Track* const track = t.get(); |
| |
| // process fast tracks |
| if (track->isFastTrack()) { |
| |
| // It's theoretically possible (though unlikely) for a fast track to be created |
| // and then removed within the same normal mix cycle. This is not a problem, as |
| // the track never becomes active so it's fast mixer slot is never touched. |
| // The converse, of removing an (active) track and then creating a new track |
| // at the identical fast mixer slot within the same normal mix cycle, |
| // is impossible because the slot isn't marked available until the end of each cycle. |
| int j = track->mFastIndex; |
| ALOG_ASSERT(0 < j && j < (int)FastMixerState::kMaxFastTracks); |
| ALOG_ASSERT(!(mFastTrackAvailMask & (1 << j))); |
| FastTrack *fastTrack = &state->mFastTracks[j]; |
| |
| // Determine whether the track is currently in underrun condition, |
| // and whether it had a recent underrun. |
| FastTrackDump *ftDump = &mFastMixerDumpState.mTracks[j]; |
| FastTrackUnderruns underruns = ftDump->mUnderruns; |
| uint32_t recentFull = (underruns.mBitFields.mFull - |
| track->mObservedUnderruns.mBitFields.mFull) & UNDERRUN_MASK; |
| uint32_t recentPartial = (underruns.mBitFields.mPartial - |
| track->mObservedUnderruns.mBitFields.mPartial) & UNDERRUN_MASK; |
| uint32_t recentEmpty = (underruns.mBitFields.mEmpty - |
| track->mObservedUnderruns.mBitFields.mEmpty) & UNDERRUN_MASK; |
| uint32_t recentUnderruns = recentPartial + recentEmpty; |
| track->mObservedUnderruns = underruns; |
| // don't count underruns that occur while stopping or pausing |
| // or stopped which can occur when flush() is called while active |
| if (!(track->isStopping() || track->isPausing() || track->isStopped())) { |
| track->mUnderrunCount += recentUnderruns; |
| } |
| |
| // This is similar to the state machine for normal tracks, |
| // with a few modifications for fast tracks. |
| bool isActive = true; |
| switch (track->mState) { |
| case TrackBase::STOPPING_1: |
| // track stays active in STOPPING_1 state until first underrun |
| if (recentUnderruns > 0) { |
| track->mState = TrackBase::STOPPING_2; |
| } |
| break; |
| case TrackBase::PAUSING: |
| // ramp down is not yet implemented |
| track->setPaused(); |
| break; |
| case TrackBase::RESUMING: |
| // ramp up is not yet implemented |
| track->mState = TrackBase::ACTIVE; |
| break; |
| case TrackBase::ACTIVE: |
| if (recentFull > 0 || recentPartial > 0) { |
| // track has provided at least some frames recently: reset retry count |
| track->mRetryCount = kMaxTrackRetries; |
| } |
| if (recentUnderruns == 0) { |
| // no recent underruns: stay active |
| break; |
| } |
| // there has recently been an underrun of some kind |
| if (track->sharedBuffer() == 0) { |
| // were any of the recent underruns "empty" (no frames available)? |
| if (recentEmpty == 0) { |
| // no, then ignore the partial underruns as they are allowed indefinitely |
| break; |
| } |
| // there has recently been an "empty" underrun: decrement the retry counter |
| if (--(track->mRetryCount) > 0) { |
| break; |
| } |
| // indicate to client process that the track was disabled because of underrun; |
| // it will then automatically call start() when data is available |
| android_atomic_or(CBLK_DISABLED, &track->mCblk->flags); |
| // remove from active list, but state remains ACTIVE [confusing but true] |
| isActive = false; |
| break; |
| } |
| // fall through |
| case TrackBase::STOPPING_2: |
| case TrackBase::PAUSED: |
| case TrackBase::TERMINATED: |
| case TrackBase::STOPPED: |
| case TrackBase::FLUSHED: // flush() while active |
| // Check for presentation complete if track is inactive |
| // We have consumed all the buffers of this track. |
| // This would be incomplete if we auto-paused on underrun |
| { |
| size_t audioHALFrames = |
| (mOutput->stream->get_latency(mOutput->stream)*mSampleRate) / 1000; |
| size_t framesWritten = mBytesWritten / mFrameSize; |
| if (!(mStandby || track->presentationComplete(framesWritten, audioHALFrames))) { |
| // track stays in active list until presentation is complete |
| break; |
| } |
| } |
| if (track->isStopping_2()) { |
| track->mState = TrackBase::STOPPED; |
| } |
| if (track->isStopped()) { |
| // Can't reset directly, as fast mixer is still polling this track |
| // track->reset(); |
| // So instead mark this track as needing to be reset after push with ack |
| resetMask |= 1 << i; |
| } |
| isActive = false; |
| break; |
| case TrackBase::IDLE: |
| default: |
| LOG_FATAL("unexpected track state %d", track->mState); |
| } |
| |
| if (isActive) { |
| // was it previously inactive? |
| if (!(state->mTrackMask & (1 << j))) { |
| ExtendedAudioBufferProvider *eabp = track; |
| VolumeProvider *vp = track; |
| fastTrack->mBufferProvider = eabp; |
| fastTrack->mVolumeProvider = vp; |
| fastTrack->mSampleRate = track->mSampleRate; |
| fastTrack->mChannelMask = track->mChannelMask; |
| fastTrack->mGeneration++; |
| state->mTrackMask |= 1 << j; |
| didModify = true; |
| // no acknowledgement required for newly active tracks |
| } |
| // cache the combined master volume and stream type volume for fast mixer; this |
| // lacks any synchronization or barrier so VolumeProvider may read a stale value |
| track->mCachedVolume = masterVolume * mStreamTypes[track->streamType()].volume; |
| ++fastTracks; |
| } else { |
| // was it previously active? |
| if (state->mTrackMask & (1 << j)) { |
| fastTrack->mBufferProvider = NULL; |
| fastTrack->mGeneration++; |
| state->mTrackMask &= ~(1 << j); |
| didModify = true; |
| // If any fast tracks were removed, we must wait for acknowledgement |
| // because we're about to decrement the last sp<> on those tracks. |
| block = FastMixerStateQueue::BLOCK_UNTIL_ACKED; |
| } else { |
| LOG_FATAL("fast track %d should have been active", j); |
| } |
| tracksToRemove->add(track); |
| // Avoids a misleading display in dumpsys |
| track->mObservedUnderruns.mBitFields.mMostRecent = UNDERRUN_FULL; |
| } |
| continue; |
| } |
| |
| { // local variable scope to avoid goto warning |
| |
| audio_track_cblk_t* cblk = track->cblk(); |
| |
| // The first time a track is added we wait |
| // for all its buffers to be filled before processing it |
| int name = track->name(); |
| // make sure that we have enough frames to mix one full buffer. |
| // enforce this condition only once to enable draining the buffer in case the client |
| // app does not call stop() and relies on underrun to stop: |
| // hence the test on (mMixerStatus == MIXER_TRACKS_READY) meaning the track was mixed |
| // during last round |
| uint32_t minFrames = 1; |
| if ((track->sharedBuffer() == 0) && !track->isStopped() && !track->isPausing() && |
| (mMixerStatusIgnoringFastTracks == MIXER_TRACKS_READY)) { |
| if (t->sampleRate() == mSampleRate) { |
| minFrames = mNormalFrameCount; |
| } else { |
| // +1 for rounding and +1 for additional sample needed for interpolation |
| minFrames = (mNormalFrameCount * t->sampleRate()) / mSampleRate + 1 + 1; |
| // add frames already consumed but not yet released by the resampler |
| // because cblk->framesReady() will include these frames |
| minFrames += mAudioMixer->getUnreleasedFrames(track->name()); |
| // the minimum track buffer size is normally twice the number of frames necessary |
| // to fill one buffer and the resampler should not leave more than one buffer worth |
| // of unreleased frames after each pass, but just in case... |
| ALOG_ASSERT(minFrames <= cblk->frameCount_); |
| } |
| } |
| if ((track->framesReady() >= minFrames) && track->isReady() && |
| !track->isPaused() && !track->isTerminated()) |
| { |
| ALOGVV("track %d u=%08x, s=%08x [OK] on thread %p", name, cblk->user, cblk->server, |
| this); |
| |
| mixedTracks++; |
| |
| // track->mainBuffer() != mMixBuffer means there is an effect chain |
| // connected to the track |
| chain.clear(); |
| if (track->mainBuffer() != mMixBuffer) { |
| chain = getEffectChain_l(track->sessionId()); |
| // Delegate volume control to effect in track effect chain if needed |
| if (chain != 0) { |
| tracksWithEffect++; |
| } else { |
| ALOGW("prepareTracks_l(): track %d attached to effect but no chain found on " |
| "session %d", |
| name, track->sessionId()); |
| } |
| } |
| |
| |
| int param = AudioMixer::VOLUME; |
| if (track->mFillingUpStatus == Track::FS_FILLED) { |
| // no ramp for the first volume setting |
| track->mFillingUpStatus = Track::FS_ACTIVE; |
| if (track->mState == TrackBase::RESUMING) { |
| track->mState = TrackBase::ACTIVE; |
| param = AudioMixer::RAMP_VOLUME; |
| } |
| mAudioMixer->setParameter(name, AudioMixer::RESAMPLE, AudioMixer::RESET, NULL); |
| } else if (cblk->server != 0) { |
| // If the track is stopped before the first frame was mixed, |
| // do not apply ramp |
| param = AudioMixer::RAMP_VOLUME; |
| } |
| |
| // compute volume for this track |
| uint32_t vl, vr, va; |
| if (track->isPausing() || mStreamTypes[track->streamType()].mute) { |
| vl = vr = va = 0; |
| if (track->isPausing()) { |
| track->setPaused(); |
| } |
| } else { |
| |
| // read original volumes with volume control |
| float typeVolume = mStreamTypes[track->streamType()].volume; |
| float v = masterVolume * typeVolume; |
| ServerProxy *proxy = track->mServerProxy; |
| uint32_t vlr = proxy->getVolumeLR(); |
| vl = vlr & 0xFFFF; |
| vr = vlr >> 16; |
| // track volumes come from shared memory, so can't be trusted and must be clamped |
| if (vl > MAX_GAIN_INT) { |
| ALOGV("Track left volume out of range: %04X", vl); |
| vl = MAX_GAIN_INT; |
| } |
| if (vr > MAX_GAIN_INT) { |
| ALOGV("Track right volume out of range: %04X", vr); |
| vr = MAX_GAIN_INT; |
| } |
| // now apply the master volume and stream type volume |
| vl = (uint32_t)(v * vl) << 12; |
| vr = (uint32_t)(v * vr) << 12; |
| // assuming master volume and stream type volume each go up to 1.0, |
| // vl and vr are now in 8.24 format |
| |
| uint16_t sendLevel = proxy->getSendLevel_U4_12(); |
| // send level comes from shared memory and so may be corrupt |
| if (sendLevel > MAX_GAIN_INT) { |
| ALOGV("Track send level out of range: %04X", sendLevel); |
| sendLevel = MAX_GAIN_INT; |
| } |
| va = (uint32_t)(v * sendLevel); |
| } |
| // Delegate volume control to effect in track effect chain if needed |
| if (chain != 0 && chain->setVolume_l(&vl, &vr)) { |
| // Do not ramp volume if volume is controlled by effect |
| param = AudioMixer::VOLUME; |
| track->mHasVolumeController = true; |
| } else { |
| // force no volume ramp when volume controller was just disabled or removed |
| // from effect chain to avoid volume spike |
| if (track->mHasVolumeController) { |
| param = AudioMixer::VOLUME; |
| } |
| track->mHasVolumeController = false; |
| } |
| |
| // Convert volumes from 8.24 to 4.12 format |
| // This additional clamping is needed in case chain->setVolume_l() overshot |
| vl = (vl + (1 << 11)) >> 12; |
| if (vl > MAX_GAIN_INT) { |
| vl = MAX_GAIN_INT; |
| } |
| vr = (vr + (1 << 11)) >> 12; |
| if (vr > MAX_GAIN_INT) { |
| vr = MAX_GAIN_INT; |
| } |
| |
| if (va > MAX_GAIN_INT) { |
| va = MAX_GAIN_INT; // va is uint32_t, so no need to check for - |
| } |
| |
| // XXX: these things DON'T need to be done each time |
| mAudioMixer->setBufferProvider(name, track); |
| mAudioMixer->enable(name); |
| |
| mAudioMixer->setParameter(name, param, AudioMixer::VOLUME0, (void *)vl); |
| mAudioMixer->setParameter(name, param, AudioMixer::VOLUME1, (void *)vr); |
| mAudioMixer->setParameter(name, param, AudioMixer::AUXLEVEL, (void *)va); |
| mAudioMixer->setParameter( |
| name, |
| AudioMixer::TRACK, |
| AudioMixer::FORMAT, (void *)track->format()); |
| mAudioMixer->setParameter( |
| name, |
| AudioMixer::TRACK, |
| AudioMixer::CHANNEL_MASK, (void *)track->channelMask()); |
| // limit track sample rate to 2 x output sample rate, which changes at re-configuration |
| uint32_t maxSampleRate = mSampleRate * 2; |
| uint32_t reqSampleRate = track->mServerProxy->getSampleRate(); |
| if (reqSampleRate == 0) { |
| reqSampleRate = mSampleRate; |
| } else if (reqSampleRate > maxSampleRate) { |
| reqSampleRate = maxSampleRate; |
| } |
| mAudioMixer->setParameter( |
| name, |
| AudioMixer::RESAMPLE, |
| AudioMixer::SAMPLE_RATE, |
| (void *)reqSampleRate); |
| mAudioMixer->setParameter( |
| name, |
| AudioMixer::TRACK, |
| AudioMixer::MAIN_BUFFER, (void *)track->mainBuffer()); |
| mAudioMixer->setParameter( |
| name, |
| AudioMixer::TRACK, |
| AudioMixer::AUX_BUFFER, (void *)track->auxBuffer()); |
| |
| // reset retry count |
| track->mRetryCount = kMaxTrackRetries; |
| |
| // If one track is ready, set the mixer ready if: |
| // - the mixer was not ready during previous round OR |
| // - no other track is not ready |
| if (mMixerStatusIgnoringFastTracks != MIXER_TRACKS_READY || |
| mixerStatus != MIXER_TRACKS_ENABLED) { |
| mixerStatus = MIXER_TRACKS_READY; |
| } |
| } else { |
| // clear effect chain input buffer if an active track underruns to avoid sending |
| // previous audio buffer again to effects |
| chain = getEffectChain_l(track->sessionId()); |
| if (chain != 0) { |
| chain->clearInputBuffer(); |
| } |
| |
| ALOGVV("track %d u=%08x, s=%08x [NOT READY] on thread %p", name, cblk->user, |
| cblk->server, this); |
| if ((track->sharedBuffer() != 0) || track->isTerminated() || |
| track->isStopped() || track->isPaused()) { |
| // We have consumed all the buffers of this track. |
| // Remove it from the list of active tracks. |
| // TODO: use actual buffer filling status instead of latency when available from |
| // audio HAL |
| size_t audioHALFrames = (latency_l() * mSampleRate) / 1000; |
| size_t framesWritten = mBytesWritten / mFrameSize; |
| if (mStandby || track->presentationComplete(framesWritten, audioHALFrames)) { |
| if (track->isStopped()) { |
| track->reset(); |
| } |
| tracksToRemove->add(track); |
| } |
| } else { |
| track->mUnderrunCount++; |
| // No buffers for this track. Give it a few chances to |
| // fill a buffer, then remove it from active list. |
| if (--(track->mRetryCount) <= 0) { |
| ALOGI("BUFFER TIMEOUT: remove(%d) from active list on thread %p", name, this); |
| tracksToRemove->add(track); |
| // indicate to client process that the track was disabled because of underrun; |
| // it will then automatically call start() when data is available |
| android_atomic_or(CBLK_DISABLED, &cblk->flags); |
| // If one track is not ready, mark the mixer also not ready if: |
| // - the mixer was ready during previous round OR |
| // - no other track is ready |
| } else if (mMixerStatusIgnoringFastTracks == MIXER_TRACKS_READY || |
| mixerStatus != MIXER_TRACKS_READY) { |
| mixerStatus = MIXER_TRACKS_ENABLED; |
| } |
| } |
| mAudioMixer->disable(name); |
| } |
| |
| } // local variable scope to avoid goto warning |
| track_is_ready: ; |
| |
| } |
| |
| // Push the new FastMixer state if necessary |
| bool pauseAudioWatchdog = false; |
| if (didModify) { |
| state->mFastTracksGen++; |
| // if the fast mixer was active, but now there are no fast tracks, then put it in cold idle |
| if (kUseFastMixer == FastMixer_Dynamic && |
| state->mCommand == FastMixerState::MIX_WRITE && state->mTrackMask <= 1) { |
| state->mCommand = FastMixerState::COLD_IDLE; |
| state->mColdFutexAddr = &mFastMixerFutex; |
| state->mColdGen++; |
| mFastMixerFutex = 0; |
| if (kUseFastMixer == FastMixer_Dynamic) { |
| mNormalSink = mOutputSink; |
| } |
| // If we go into cold idle, need to wait for acknowledgement |
| // so that fast mixer stops doing I/O. |
| block = FastMixerStateQueue::BLOCK_UNTIL_ACKED; |
| pauseAudioWatchdog = true; |
| } |
| } |
| if (sq != NULL) { |
| sq->end(didModify); |
| sq->push(block); |
| } |
| #ifdef AUDIO_WATCHDOG |
| if (pauseAudioWatchdog && mAudioWatchdog != 0) { |
| mAudioWatchdog->pause(); |
| } |
| #endif |
| |
| // Now perform the deferred reset on fast tracks that have stopped |
| while (resetMask != 0) { |
| size_t i = __builtin_ctz(resetMask); |
| ALOG_ASSERT(i < count); |
| resetMask &= ~(1 << i); |
| sp<Track> t = mActiveTracks[i].promote(); |
| if (t == 0) { |
| continue; |
| } |
| Track* track = t.get(); |
| ALOG_ASSERT(track->isFastTrack() && track->isStopped()); |
| track->reset(); |
| } |
| |
| // remove all the tracks that need to be... |
| count = tracksToRemove->size(); |
| if (CC_UNLIKELY(count)) { |
| for (size_t i=0 ; i<count ; i++) { |
| const sp<Track>& track = tracksToRemove->itemAt(i); |
| mActiveTracks.remove(track); |
| if (track->mainBuffer() != mMixBuffer) { |
| chain = getEffectChain_l(track->sessionId()); |
| if (chain != 0) { |
| ALOGV("stopping track on chain %p for session Id: %d", chain.get(), |
| track->sessionId()); |
| chain->decActiveTrackCnt(); |
| } |
| } |
| if (track->isTerminated()) { |
| removeTrack_l(track); |
| } |
| } |
| } |
| |
| // mix buffer must be cleared if all tracks are connected to an |
| // effect chain as in this case the mixer will not write to |
| // mix buffer and track effects will accumulate into it |
| if ((mixedTracks != 0 && mixedTracks == tracksWithEffect) || |
| (mixedTracks == 0 && fastTracks > 0)) { |
| // FIXME as a performance optimization, should remember previous zero status |
| memset(mMixBuffer, 0, mNormalFrameCount * mChannelCount * sizeof(int16_t)); |
| } |
| |
| // if any fast tracks, then status is ready |
| mMixerStatusIgnoringFastTracks = mixerStatus; |
| if (fastTracks > 0) { |
| mixerStatus = MIXER_TRACKS_READY; |
| } |
| return mixerStatus; |
| } |
| |
| // getTrackName_l() must be called with ThreadBase::mLock held |
| int AudioFlinger::MixerThread::getTrackName_l(audio_channel_mask_t channelMask, int sessionId) |
| { |
| return mAudioMixer->getTrackName(channelMask, sessionId); |
| } |
| |
| // deleteTrackName_l() must be called with ThreadBase::mLock held |
| void AudioFlinger::MixerThread::deleteTrackName_l(int name) |
| { |
| ALOGV("remove track (%d) and delete from mixer", name); |
| mAudioMixer->deleteTrackName(name); |
| } |
| |
| // checkForNewParameters_l() must be called with ThreadBase::mLock held |
| bool AudioFlinger::MixerThread::checkForNewParameters_l() |
| { |
| // if !&IDLE, holds the FastMixer state to restore after new parameters processed |
| FastMixerState::Command previousCommand = FastMixerState::HOT_IDLE; |
| bool reconfig = false; |
| |
| while (!mNewParameters.isEmpty()) { |
| |
| if (mFastMixer != NULL) { |
| FastMixerStateQueue *sq = mFastMixer->sq(); |
| FastMixerState *state = sq->begin(); |
| if (!(state->mCommand & FastMixerState::IDLE)) { |
| previousCommand = state->mCommand; |
| state->mCommand = FastMixerState::HOT_IDLE; |
| sq->end(); |
| sq->push(FastMixerStateQueue::BLOCK_UNTIL_ACKED); |
| } else { |
| sq->end(false /*didModify*/); |
| } |
| } |
| |
| status_t status = NO_ERROR; |
| String8 keyValuePair = mNewParameters[0]; |
| AudioParameter param = AudioParameter(keyValuePair); |
| int value; |
| |
| if (param.getInt(String8(AudioParameter::keySamplingRate), value) == NO_ERROR) { |
| reconfig = true; |
| } |
| if (param.getInt(String8(AudioParameter::keyFormat), value) == NO_ERROR) { |
| if ((audio_format_t) value != AUDIO_FORMAT_PCM_16_BIT) { |
| status = BAD_VALUE; |
| } else { |
| reconfig = true; |
| } |
| } |
| if (param.getInt(String8(AudioParameter::keyChannels), value) == NO_ERROR) { |
| if (value != AUDIO_CHANNEL_OUT_STEREO) { |
| status = BAD_VALUE; |
| } else { |
| reconfig = true; |
| } |
| } |
| if (param.getInt(String8(AudioParameter::keyFrameCount), value) == NO_ERROR) { |
| // do not accept frame count changes if tracks are open as the track buffer |
| // size depends on frame count and correct behavior would not be guaranteed |
| // if frame count is changed after track creation |
| if (!mTracks.isEmpty()) { |
| status = INVALID_OPERATION; |
| } else { |
| reconfig = true; |
| } |
| } |
| if (param.getInt(String8(AudioParameter::keyRouting), value) == NO_ERROR) { |
| #ifdef ADD_BATTERY_DATA |
| // when changing the audio output device, call addBatteryData to notify |
| // the change |
| if (mOutDevice != value) { |
| uint32_t params = 0; |
| // check whether speaker is on |
| if (value & AUDIO_DEVICE_OUT_SPEAKER) { |
| params |= IMediaPlayerService::kBatteryDataSpeakerOn; |
| } |
| |
| audio_devices_t deviceWithoutSpeaker |
| = AUDIO_DEVICE_OUT_ALL & ~AUDIO_DEVICE_OUT_SPEAKER; |
| // check if any other device (except speaker) is on |
| if (value & deviceWithoutSpeaker ) { |
| params |= IMediaPlayerService::kBatteryDataOtherAudioDeviceOn; |
| } |
| |
| if (params != 0) { |
| addBatteryData(params); |
| } |
| } |
| #endif |
| |
| // forward device change to effects that have requested to be |
| // aware of attached audio device. |
| if (value != AUDIO_DEVICE_NONE) { |
| mOutDevice = value; |
| for (size_t i = 0; i < mEffectChains.size(); i++) { |
| mEffectChains[i]->setDevice_l(mOutDevice); |
| } |
| } |
| } |
| |
| if (status == NO_ERROR) { |
| status = mOutput->stream->common.set_parameters(&mOutput->stream->common, |
| keyValuePair.string()); |
| if (!mStandby && status == INVALID_OPERATION) { |
| mOutput->stream->common.standby(&mOutput->stream->common); |
| mStandby = true; |
| mBytesWritten = 0; |
| status = mOutput->stream->common.set_parameters(&mOutput->stream->common, |
| keyValuePair.string()); |
| } |
| if (status == NO_ERROR && reconfig) { |
| delete mAudioMixer; |
| // for safety in case readOutputParameters() accesses mAudioMixer (it doesn't) |
| mAudioMixer = NULL; |
| readOutputParameters(); |
| mAudioMixer = new AudioMixer(mNormalFrameCount, mSampleRate); |
| for (size_t i = 0; i < mTracks.size() ; i++) { |
| int name = getTrackName_l(mTracks[i]->mChannelMask, mTracks[i]->mSessionId); |
| if (name < 0) { |
| break; |
| } |
| mTracks[i]->mName = name; |
| } |
| sendIoConfigEvent_l(AudioSystem::OUTPUT_CONFIG_CHANGED); |
| } |
| } |
| |
| mNewParameters.removeAt(0); |
| |
| mParamStatus = status; |
| mParamCond.signal(); |
| // wait for condition with time out in case the thread calling ThreadBase::setParameters() |
| // already timed out waiting for the status and will never signal the condition. |
| mWaitWorkCV.waitRelative(mLock, kSetParametersTimeoutNs); |
| } |
| |
| if (!(previousCommand & FastMixerState::IDLE)) { |
| ALOG_ASSERT(mFastMixer != NULL); |
| FastMixerStateQueue *sq = mFastMixer->sq(); |
| FastMixerState *state = sq->begin(); |
| ALOG_ASSERT(state->mCommand == FastMixerState::HOT_IDLE); |
| state->mCommand = previousCommand; |
| sq->end(); |
| sq->push(FastMixerStateQueue::BLOCK_UNTIL_PUSHED); |
| } |
| |
| return reconfig; |
| } |
| |
| |
| void AudioFlinger::MixerThread::dumpInternals(int fd, const Vector<String16>& args) |
| { |
| const size_t SIZE = 256; |
| char buffer[SIZE]; |
| String8 result; |
| |
| PlaybackThread::dumpInternals(fd, args); |
| |
| snprintf(buffer, SIZE, "AudioMixer tracks: %08x\n", mAudioMixer->trackNames()); |
| result.append(buffer); |
| write(fd, result.string(), result.size()); |
| |
| // Make a non-atomic copy of fast mixer dump state so it won't change underneath us |
| FastMixerDumpState copy = mFastMixerDumpState; |
| copy.dump(fd); |
| |
| #ifdef STATE_QUEUE_DUMP |
| // Similar for state queue |
| StateQueueObserverDump observerCopy = mStateQueueObserverDump; |
| observerCopy.dump(fd); |
| StateQueueMutatorDump mutatorCopy = mStateQueueMutatorDump; |
| mutatorCopy.dump(fd); |
| #endif |
| |
| #ifdef TEE_SINK |
| // Write the tee output to a .wav file |
| dumpTee(fd, mTeeSource, mId); |
| #endif |
| |
| #ifdef AUDIO_WATCHDOG |
| if (mAudioWatchdog != 0) { |
| // Make a non-atomic copy of audio watchdog dump so it won't change underneath us |
| AudioWatchdogDump wdCopy = mAudioWatchdogDump; |
| wdCopy.dump(fd); |
| } |
| #endif |
| } |
| |
| uint32_t AudioFlinger::MixerThread::idleSleepTimeUs() const |
| { |
| return (uint32_t)(((mNormalFrameCount * 1000) / mSampleRate) * 1000) / 2; |
| } |
| |
| uint32_t AudioFlinger::MixerThread::suspendSleepTimeUs() const |
| { |
| return (uint32_t)(((mNormalFrameCount * 1000) / mSampleRate) * 1000); |
| } |
| |
| void AudioFlinger::MixerThread::cacheParameters_l() |
| { |
| PlaybackThread::cacheParameters_l(); |
| |
| // FIXME: Relaxed timing because of a certain device that can't meet latency |
| // Should be reduced to 2x after the vendor fixes the driver issue |
| // increase threshold again due to low power audio mode. The way this warning |
| // threshold is calculated and its usefulness should be reconsidered anyway. |
| maxPeriod = seconds(mNormalFrameCount) / mSampleRate * 15; |
| } |
| |
| // ---------------------------------------------------------------------------- |
| |
| AudioFlinger::DirectOutputThread::DirectOutputThread(const sp<AudioFlinger>& audioFlinger, |
| AudioStreamOut* output, audio_io_handle_t id, audio_devices_t device) |
| : PlaybackThread(audioFlinger, output, id, device, DIRECT) |
| // mLeftVolFloat, mRightVolFloat |
| { |
| } |
| |
| AudioFlinger::DirectOutputThread::~DirectOutputThread() |
| { |
| } |
| |
| AudioFlinger::PlaybackThread::mixer_state AudioFlinger::DirectOutputThread::prepareTracks_l( |
| Vector< sp<Track> > *tracksToRemove |
| ) |
| { |
| size_t count = mActiveTracks.size(); |
| mixer_state mixerStatus = MIXER_IDLE; |
| |
| // find out which tracks need to be processed |
| for (size_t i = 0; i < count; i++) { |
| sp<Track> t = mActiveTracks[i].promote(); |
| // The track died recently |
| if (t == 0) { |
| continue; |
| } |
| |
| Track* const track = t.get(); |
| audio_track_cblk_t* cblk = track->cblk(); |
| |
| // The first time a track is added we wait |
| // for all its buffers to be filled before processing it |
| uint32_t minFrames; |
| if ((track->sharedBuffer() == 0) && !track->isStopped() && !track->isPausing()) { |
| minFrames = mNormalFrameCount; |
| } else { |
| minFrames = 1; |
| } |
| if ((track->framesReady() >= minFrames) && track->isReady() && |
| !track->isPaused() && !track->isTerminated()) |
| { |
| ALOGVV("track %d u=%08x, s=%08x [OK]", track->name(), cblk->user, cblk->server); |
| |
| if (track->mFillingUpStatus == Track::FS_FILLED) { |
| track->mFillingUpStatus = Track::FS_ACTIVE; |
| mLeftVolFloat = mRightVolFloat = 0; |
| if (track->mState == TrackBase::RESUMING) { |
| track->mState = TrackBase::ACTIVE; |
| } |
| } |
| |
| // compute volume for this track |
| float left, right; |
| if (mMasterMute || track->isPausing() || mStreamTypes[track->streamType()].mute) { |
| left = right = 0; |
| if (track->isPausing()) { |
| track->setPaused(); |
| } |
| } else { |
| float typeVolume = mStreamTypes[track->streamType()].volume; |
| float v = mMasterVolume * typeVolume; |
| uint32_t vlr = track->mServerProxy->getVolumeLR(); |
| float v_clamped = v * (vlr & 0xFFFF); |
| if (v_clamped > MAX_GAIN) { |
| v_clamped = MAX_GAIN; |
| } |
| left = v_clamped/MAX_GAIN; |
| v_clamped = v * (vlr >> 16); |
| if (v_clamped > MAX_GAIN) { |
| v_clamped = MAX_GAIN; |
| } |
| right = v_clamped/MAX_GAIN; |
| } |
| // Only consider last track started for volume and mixer state control. |
| // This is the last entry in mActiveTracks unless a track underruns. |
| // As we only care about the transition phase between two tracks on a |
| // direct output, it is not a problem to ignore the underrun case. |
| if (i == (count - 1)) { |
| if (left != mLeftVolFloat || right != mRightVolFloat) { |
| mLeftVolFloat = left; |
| mRightVolFloat = right; |
| |
| // Convert volumes from float to 8.24 |
| uint32_t vl = (uint32_t)(left * (1 << 24)); |
| uint32_t vr = (uint32_t)(right * (1 << 24)); |
| |
| // Delegate volume control to effect in track effect chain if needed |
| // only one effect chain can be present on DirectOutputThread, so if |
| // there is one, the track is connected to it |
| if (!mEffectChains.isEmpty()) { |
| // Do not ramp volume if volume is controlled by effect |
| mEffectChains[0]->setVolume_l(&vl, &vr); |
| left = (float)vl / (1 << 24); |
| right = (float)vr / (1 << 24); |
| } |
| mOutput->stream->set_volume(mOutput->stream, left, right); |
| } |
| |
| // reset retry count |
| track->mRetryCount = kMaxTrackRetriesDirect; |
| mActiveTrack = t; |
| mixerStatus = MIXER_TRACKS_READY; |
| } |
| } else { |
| // clear effect chain input buffer if the last active track started underruns |
| // to avoid sending previous audio buffer again to effects |
| if (!mEffectChains.isEmpty() && (i == (count -1))) { |
| mEffectChains[0]->clearInputBuffer(); |
| } |
| |
| ALOGVV("track %d u=%08x, s=%08x [NOT READY]", track->name(), cblk->user, cblk->server); |
| if ((track->sharedBuffer() != 0) || track->isTerminated() || |
| track->isStopped() || track->isPaused()) { |
| // We have consumed all the buffers of this track. |
| // Remove it from the list of active tracks. |
| // TODO: implement behavior for compressed audio |
| size_t audioHALFrames = (latency_l() * mSampleRate) / 1000; |
| size_t framesWritten = mBytesWritten / mFrameSize; |
| if (mStandby || track->presentationComplete(framesWritten, audioHALFrames)) { |
| if (track->isStopped()) { |
| track->reset(); |
| } |
| tracksToRemove->add(track); |
| } |
| } else { |
| // No buffers for this track. Give it a few chances to |
| // fill a buffer, then remove it from active list. |
| // Only consider last track started for mixer state control |
| if (--(track->mRetryCount) <= 0) { |
| ALOGV("BUFFER TIMEOUT: remove(%d) from active list", track->name()); |
| tracksToRemove->add(track); |
| } else if (i == (count -1)){ |
| mixerStatus = MIXER_TRACKS_ENABLED; |
| } |
| } |
| } |
| } |
| |
| // remove all the tracks that need to be... |
| count = tracksToRemove->size(); |
| if (CC_UNLIKELY(count)) { |
| for (size_t i = 0 ; i < count ; i++) { |
| const sp<Track>& track = tracksToRemove->itemAt(i); |
| mActiveTracks.remove(track); |
| if (!mEffectChains.isEmpty()) { |
| ALOGV("stopping track on chain %p for session Id: %d", mEffectChains[0].get(), |
| track->sessionId()); |
| mEffectChains[0]->decActiveTrackCnt(); |
| } |
| if (track->isTerminated()) { |
| removeTrack_l(track); |
| } |
| } |
| } |
| |
| return mixerStatus; |
| } |
| |
| void AudioFlinger::DirectOutputThread::threadLoop_mix() |
| { |
| AudioBufferProvider::Buffer buffer; |
| size_t frameCount = mFrameCount; |
| int8_t *curBuf = (int8_t *)mMixBuffer; |
| // output audio to hardware |
| while (frameCount) { |
| buffer.frameCount = frameCount; |
| mActiveTrack->getNextBuffer(&buffer); |
| if (CC_UNLIKELY(buffer.raw == NULL)) { |
| memset(curBuf, 0, frameCount * mFrameSize); |
| break; |
| } |
| memcpy(curBuf, buffer.raw, buffer.frameCount * mFrameSize); |
| frameCount -= buffer.frameCount; |
| curBuf += buffer.frameCount * mFrameSize; |
| mActiveTrack->releaseBuffer(&buffer); |
| } |
| sleepTime = 0; |
| standbyTime = systemTime() + standbyDelay; |
| mActiveTrack.clear(); |
| |
| } |
| |
| void AudioFlinger::DirectOutputThread::threadLoop_sleepTime() |
| { |
| if (sleepTime == 0) { |
| if (mMixerStatus == MIXER_TRACKS_ENABLED) { |
| sleepTime = activeSleepTime; |
| } else { |
| sleepTime = idleSleepTime; |
| } |
| } else if (mBytesWritten != 0 && audio_is_linear_pcm(mFormat)) { |
| memset(mMixBuffer, 0, mFrameCount * mFrameSize); |
| sleepTime = 0; |
| } |
| } |
| |
| // getTrackName_l() must be called with ThreadBase::mLock held |
| int AudioFlinger::DirectOutputThread::getTrackName_l(audio_channel_mask_t channelMask, |
| int sessionId) |
| { |
| return 0; |
| } |
| |
| // deleteTrackName_l() must be called with ThreadBase::mLock held |
| void AudioFlinger::DirectOutputThread::deleteTrackName_l(int name) |
| { |
| } |
| |
| // checkForNewParameters_l() must be called with ThreadBase::mLock held |
| bool AudioFlinger::DirectOutputThread::checkForNewParameters_l() |
| { |
| bool reconfig = false; |
| |
| while (!mNewParameters.isEmpty()) { |
| status_t status = NO_ERROR; |
| String8 keyValuePair = mNewParameters[0]; |
| AudioParameter param = AudioParameter(keyValuePair); |
| int value; |
| |
| if (param.getInt(String8(AudioParameter::keyFrameCount), value) == NO_ERROR) { |
| // do not accept frame count changes if tracks are open as the track buffer |
| // size depends on frame count and correct behavior would not be garantied |
| // if frame count is changed after track creation |
| if (!mTracks.isEmpty()) { |
| status = INVALID_OPERATION; |
| } else { |
| reconfig = true; |
| } |
| } |
| if (status == NO_ERROR) { |
| status = mOutput->stream->common.set_parameters(&mOutput->stream->common, |
| keyValuePair.string()); |
| if (!mStandby && status == INVALID_OPERATION) { |
| mOutput->stream->common.standby(&mOutput->stream->common); |
| mStandby = true; |
| mBytesWritten = 0; |
| status = mOutput->stream->common.set_parameters(&mOutput->stream->common, |
| keyValuePair.string()); |
| } |
| if (status == NO_ERROR && reconfig) { |
| readOutputParameters(); |
| sendIoConfigEvent_l(AudioSystem::OUTPUT_CONFIG_CHANGED); |
| } |
| } |
| |
| mNewParameters.removeAt(0); |
| |
| mParamStatus = status; |
| mParamCond.signal(); |
| // wait for condition with time out in case the thread calling ThreadBase::setParameters() |
| // already timed out waiting for the status and will never signal the condition. |
| mWaitWorkCV.waitRelative(mLock, kSetParametersTimeoutNs); |
| } |
| return reconfig; |
| } |
| |
| uint32_t AudioFlinger::DirectOutputThread::activeSleepTimeUs() const |
| { |
| uint32_t time; |
| if (audio_is_linear_pcm(mFormat)) { |
| time = PlaybackThread::activeSleepTimeUs(); |
| } else { |
| time = 10000; |
| } |
| return time; |
| } |
| |
| uint32_t AudioFlinger::DirectOutputThread::idleSleepTimeUs() const |
| { |
| uint32_t time; |
| if (audio_is_linear_pcm(mFormat)) { |
| time = (uint32_t)(((mFrameCount * 1000) / mSampleRate) * 1000) / 2; |
| } else { |
| time = 10000; |
| } |
| return time; |
| } |
| |
| uint32_t AudioFlinger::DirectOutputThread::suspendSleepTimeUs() const |
| { |
| uint32_t time; |
| if (audio_is_linear_pcm(mFormat)) { |
| time = (uint32_t)(((mFrameCount * 1000) / mSampleRate) * 1000); |
| } else { |
| time = 10000; |
| } |
| return time; |
| } |
| |
| void AudioFlinger::DirectOutputThread::cacheParameters_l() |
| { |
| PlaybackThread::cacheParameters_l(); |
| |
| // use shorter standby delay as on normal output to release |
| // hardware resources as soon as possible |
| standbyDelay = microseconds(activeSleepTime*2); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| |
| AudioFlinger::DuplicatingThread::DuplicatingThread(const sp<AudioFlinger>& audioFlinger, |
| AudioFlinger::MixerThread* mainThread, audio_io_handle_t id) |
| : MixerThread(audioFlinger, mainThread->getOutput(), id, mainThread->outDevice(), |
| DUPLICATING), |
| mWaitTimeMs(UINT_MAX) |
| { |
| addOutputTrack(mainThread); |
| } |
| |
| AudioFlinger::DuplicatingThread::~DuplicatingThread() |
| { |
| for (size_t i = 0; i < mOutputTracks.size(); i++) { |
| mOutputTracks[i]->destroy(); |
| } |
| } |
| |
| void AudioFlinger::DuplicatingThread::threadLoop_mix() |
| { |
| // mix buffers... |
| if (outputsReady(outputTracks)) { |
| mAudioMixer->process(AudioBufferProvider::kInvalidPTS); |
| } else { |
| memset(mMixBuffer, 0, mixBufferSize); |
| } |
| sleepTime = 0; |
| writeFrames = mNormalFrameCount; |
| standbyTime = systemTime() + standbyDelay; |
| } |
| |
| void AudioFlinger::DuplicatingThread::threadLoop_sleepTime() |
| { |
| if (sleepTime == 0) { |
| if (mMixerStatus == MIXER_TRACKS_ENABLED) { |
| sleepTime = activeSleepTime; |
| } else { |
| sleepTime = idleSleepTime; |
| } |
| } else if (mBytesWritten != 0) { |
| if (mMixerStatus == MIXER_TRACKS_ENABLED) { |
| writeFrames = mNormalFrameCount; |
| memset(mMixBuffer, 0, mixBufferSize); |
| } else { |
| // flush remaining overflow buffers in output tracks |
| writeFrames = 0; |
| } |
| sleepTime = 0; |
| } |
| } |
| |
| void AudioFlinger::DuplicatingThread::threadLoop_write() |
| { |
| for (size_t i = 0; i < outputTracks.size(); i++) { |
| outputTracks[i]->write(mMixBuffer, writeFrames); |
| } |
| mBytesWritten += mixBufferSize; |
| } |
| |
| void AudioFlinger::DuplicatingThread::threadLoop_standby() |
| { |
| // DuplicatingThread implements standby by stopping all tracks |
| for (size_t i = 0; i < outputTracks.size(); i++) { |
| outputTracks[i]->stop(); |
| } |
| } |
| |
| void AudioFlinger::DuplicatingThread::saveOutputTracks() |
| { |
| outputTracks = mOutputTracks; |
| } |
| |
| void AudioFlinger::DuplicatingThread::clearOutputTracks() |
| { |
| outputTracks.clear(); |
| } |
| |
| void AudioFlinger::DuplicatingThread::addOutputTrack(MixerThread *thread) |
| { |
| Mutex::Autolock _l(mLock); |
| // FIXME explain this formula |
| size_t frameCount = (3 * mNormalFrameCount * mSampleRate) / thread->sampleRate(); |
| OutputTrack *outputTrack = new OutputTrack(thread, |
| this, |
| mSampleRate, |
| mFormat, |
| mChannelMask, |
| frameCount); |
| if (outputTrack->cblk() != NULL) { |
| thread->setStreamVolume(AUDIO_STREAM_CNT, 1.0f); |
| mOutputTracks.add(outputTrack); |
| ALOGV("addOutputTrack() track %p, on thread %p", outputTrack, thread); |
| updateWaitTime_l(); |
| } |
| } |
| |
| void AudioFlinger::DuplicatingThread::removeOutputTrack(MixerThread *thread) |
| { |
| Mutex::Autolock _l(mLock); |
| for (size_t i = 0; i < mOutputTracks.size(); i++) { |
| if (mOutputTracks[i]->thread() == thread) { |
| mOutputTracks[i]->destroy(); |
| mOutputTracks.removeAt(i); |
| updateWaitTime_l(); |
| return; |
| } |
| } |
| ALOGV("removeOutputTrack(): unkonwn thread: %p", thread); |
| } |
| |
| // caller must hold mLock |
| void AudioFlinger::DuplicatingThread::updateWaitTime_l() |
| { |
| mWaitTimeMs = UINT_MAX; |
| for (size_t i = 0; i < mOutputTracks.size(); i++) { |
| sp<ThreadBase> strong = mOutputTracks[i]->thread().promote(); |
| if (strong != 0) { |
| uint32_t waitTimeMs = (strong->frameCount() * 2 * 1000) / strong->sampleRate(); |
| if (waitTimeMs < mWaitTimeMs) { |
| mWaitTimeMs = waitTimeMs; |
| } |
| } |
| } |
| } |
| |
| |
| bool AudioFlinger::DuplicatingThread::outputsReady( |
| const SortedVector< sp<OutputTrack> > &outputTracks) |
| { |
| for (size_t i = 0; i < outputTracks.size(); i++) { |
| sp<ThreadBase> thread = outputTracks[i]->thread().promote(); |
| if (thread == 0) { |
| ALOGW("DuplicatingThread::outputsReady() could not promote thread on output track %p", |
| outputTracks[i].get()); |
| return false; |
| } |
| PlaybackThread *playbackThread = (PlaybackThread *)thread.get(); |
| // see note at standby() declaration |
| if (playbackThread->standby() && !playbackThread->isSuspended()) { |
| ALOGV("DuplicatingThread output track %p on thread %p Not Ready", outputTracks[i].get(), |
| thread.get()); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| uint32_t AudioFlinger::DuplicatingThread::activeSleepTimeUs() const |
| { |
| return (mWaitTimeMs * 1000) / 2; |
| } |
| |
| void AudioFlinger::DuplicatingThread::cacheParameters_l() |
| { |
| // updateWaitTime_l() sets mWaitTimeMs, which affects activeSleepTimeUs(), so call it first |
| updateWaitTime_l(); |
| |
| MixerThread::cacheParameters_l(); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| // Record |
| // ---------------------------------------------------------------------------- |
| |
| AudioFlinger::RecordThread::RecordThread(const sp<AudioFlinger>& audioFlinger, |
| AudioStreamIn *input, |
| uint32_t sampleRate, |
| audio_channel_mask_t channelMask, |
| audio_io_handle_t id, |
| audio_devices_t outDevice, |
| audio_devices_t inDevice |
| #ifdef TEE_SINK |
| , const sp<NBAIO_Sink>& teeSink |
| #endif |
| ) : |
| ThreadBase(audioFlinger, id, outDevice, inDevice, RECORD), |
| mInput(input), mResampler(NULL), mRsmpOutBuffer(NULL), mRsmpInBuffer(NULL), |
| // mRsmpInIndex and mInputBytes set by readInputParameters() |
| mReqChannelCount(popcount(channelMask)), |
| mReqSampleRate(sampleRate) |
| // mBytesRead is only meaningful while active, and so is cleared in start() |
| // (but might be better to also clear here for dump?) |
| #ifdef TEE_SINK |
| , mTeeSink(teeSink) |
| #endif |
| { |
| snprintf(mName, kNameLength, "AudioIn_%X", id); |
| |
| readInputParameters(); |
| |
| } |
| |
| |
| AudioFlinger::RecordThread::~RecordThread() |
| { |
| delete[] mRsmpInBuffer; |
| delete mResampler; |
| delete[] mRsmpOutBuffer; |
| } |
| |
| void AudioFlinger::RecordThread::onFirstRef() |
| { |
| run(mName, PRIORITY_URGENT_AUDIO); |
| } |
| |
| status_t AudioFlinger::RecordThread::readyToRun() |
| { |
| status_t status = initCheck(); |
| ALOGW_IF(status != NO_ERROR,"RecordThread %p could not initialize", this); |
| return status; |
| } |
| |
| bool AudioFlinger::RecordThread::threadLoop() |
| { |
| AudioBufferProvider::Buffer buffer; |
| sp<RecordTrack> activeTrack; |
| Vector< sp<EffectChain> > effectChains; |
| |
| nsecs_t lastWarning = 0; |
| |
| inputStandBy(); |
| acquireWakeLock(); |
| |
| // used to verify we've read at least once before evaluating how many bytes were read |
| bool readOnce = false; |
| |
| // start recording |
| while (!exitPending()) { |
| |
| processConfigEvents(); |
| |
| { // scope for mLock |
| Mutex::Autolock _l(mLock); |
| checkForNewParameters_l(); |
| if (mActiveTrack == 0 && mConfigEvents.isEmpty()) { |
| standby(); |
| |
| if (exitPending()) { |
| break; |
| } |
| |
| releaseWakeLock_l(); |
| ALOGV("RecordThread: loop stopping"); |
| // go to sleep |
| mWaitWorkCV.wait(mLock); |
| ALOGV("RecordThread: loop starting"); |
| acquireWakeLock_l(); |
| continue; |
| } |
| if (mActiveTrack != 0) { |
| if (mActiveTrack->mState == TrackBase::PAUSING) { |
| standby(); |
| mActiveTrack.clear(); |
| mStartStopCond.broadcast(); |
| } else if (mActiveTrack->mState == TrackBase::RESUMING) { |
| if (mReqChannelCount != mActiveTrack->channelCount()) { |
| mActiveTrack.clear(); |
| mStartStopCond.broadcast(); |
| } else if (readOnce) { |
| // record start succeeds only if first read from audio input |
| // succeeds |
| if (mBytesRead >= 0) { |
| mActiveTrack->mState = TrackBase::ACTIVE; |
| } else { |
| mActiveTrack.clear(); |
| } |
| mStartStopCond.broadcast(); |
| } |
| mStandby = false; |
| } else if (mActiveTrack->mState == TrackBase::TERMINATED) { |
| removeTrack_l(mActiveTrack); |
| mActiveTrack.clear(); |
| } |
| } |
| lockEffectChains_l(effectChains); |
| } |
| |
| if (mActiveTrack != 0) { |
| if (mActiveTrack->mState != TrackBase::ACTIVE && |
| mActiveTrack->mState != TrackBase::RESUMING) { |
| unlockEffectChains(effectChains); |
| usleep(kRecordThreadSleepUs); |
| continue; |
| } |
| for (size_t i = 0; i < effectChains.size(); i ++) { |
| effectChains[i]->process_l(); |
| } |
| |
| buffer.frameCount = mFrameCount; |
| if (CC_LIKELY(mActiveTrack->getNextBuffer(&buffer) == NO_ERROR)) { |
| readOnce = true; |
| size_t framesOut = buffer.frameCount; |
| if (mResampler == NULL) { |
| // no resampling |
| while (framesOut) { |
| size_t framesIn = mFrameCount - mRsmpInIndex; |
| if (framesIn) { |
| int8_t *src = (int8_t *)mRsmpInBuffer + mRsmpInIndex * mFrameSize; |
| int8_t *dst = buffer.i8 + (buffer.frameCount - framesOut) * |
| mActiveTrack->mFrameSize; |
| if (framesIn > framesOut) |
| framesIn = framesOut; |
| mRsmpInIndex += framesIn; |
| framesOut -= framesIn; |
| if (mChannelCount == mReqChannelCount || |
| mFormat != AUDIO_FORMAT_PCM_16_BIT) { |
| memcpy(dst, src, framesIn * mFrameSize); |
| } else { |
| if (mChannelCount == 1) { |
| upmix_to_stereo_i16_from_mono_i16((int16_t *)dst, |
| (int16_t *)src, framesIn); |
| } else { |
| downmix_to_mono_i16_from_stereo_i16((int16_t *)dst, |
| (int16_t *)src, framesIn); |
| } |
| } |
| } |
| if (framesOut && mFrameCount == mRsmpInIndex) { |
| void *readInto; |
| if (framesOut == mFrameCount && |
| (mChannelCount == mReqChannelCount || |
| mFormat != AUDIO_FORMAT_PCM_16_BIT)) { |
| readInto = buffer.raw; |
| framesOut = 0; |
| } else { |
| readInto = mRsmpInBuffer; |
| mRsmpInIndex = 0; |
| } |
| mBytesRead = mInput->stream->read(mInput->stream, readInto, |
| mInputBytes); |
| if (mBytesRead <= 0) { |
| if ((mBytesRead < 0) && (mActiveTrack->mState == TrackBase::ACTIVE)) |
| { |
| ALOGE("Error reading audio input"); |
| // Force input into standby so that it tries to |
| // recover at next read attempt |
| inputStandBy(); |
| usleep(kRecordThreadSleepUs); |
| } |
| mRsmpInIndex = mFrameCount; |
| framesOut = 0; |
| buffer.frameCount = 0; |
| } |
| #ifdef TEE_SINK |
| else if (mTeeSink != 0) { |
| (void) mTeeSink->write(readInto, |
| mBytesRead >> Format_frameBitShift(mTeeSink->format())); |
| } |
| #endif |
| } |
| } |
| } else { |
| // resampling |
| |
| memset(mRsmpOutBuffer, 0, framesOut * 2 * sizeof(int32_t)); |
| // alter output frame count as if we were expecting stereo samples |
| if (mChannelCount == 1 && mReqChannelCount == 1) { |
| framesOut >>= 1; |
| } |
| mResampler->resample(mRsmpOutBuffer, framesOut, |
| this /* AudioBufferProvider* */); |
| // ditherAndClamp() works as long as all buffers returned by |
| // mActiveTrack->getNextBuffer() are 32 bit aligned which should be always true. |
| if (mChannelCount == 2 && mReqChannelCount == 1) { |
| ditherAndClamp(mRsmpOutBuffer, mRsmpOutBuffer, framesOut); |
| // the resampler always outputs stereo samples: |
| // do post stereo to mono conversion |
| downmix_to_mono_i16_from_stereo_i16(buffer.i16, (int16_t *)mRsmpOutBuffer, |
| framesOut); |
| } else { |
| ditherAndClamp((int32_t *)buffer.raw, mRsmpOutBuffer, framesOut); |
| } |
| |
| } |
| if (mFramestoDrop == 0) { |
| mActiveTrack->releaseBuffer(&buffer); |
| } else { |
| if (mFramestoDrop > 0) { |
| mFramestoDrop -= buffer.frameCount; |
| if (mFramestoDrop <= 0) { |
| clearSyncStartEvent(); |
| } |
| } else { |
| mFramestoDrop += buffer.frameCount; |
| if (mFramestoDrop >= 0 || mSyncStartEvent == 0 || |
| mSyncStartEvent->isCancelled()) { |
| ALOGW("Synced record %s, session %d, trigger session %d", |
| (mFramestoDrop >= 0) ? "timed out" : "cancelled", |
| mActiveTrack->sessionId(), |
| (mSyncStartEvent != 0) ? mSyncStartEvent->triggerSession() : 0); |
| clearSyncStartEvent(); |
| } |
| } |
| } |
| mActiveTrack->clearOverflow(); |
| } |
| // client isn't retrieving buffers fast enough |
| else { |
| if (!mActiveTrack->setOverflow()) { |
| nsecs_t now = systemTime(); |
| if ((now - lastWarning) > kWarningThrottleNs) { |
| ALOGW("RecordThread: buffer overflow"); |
| lastWarning = now; |
| } |
| } |
| // Release the processor for a while before asking for a new buffer. |
| // This will give the application more chance to read from the buffer and |
| // clear the overflow. |
| usleep(kRecordThreadSleepUs); |
| } |
| } |
| // enable changes in effect chain |
| unlockEffectChains(effectChains); |
| effectChains.clear(); |
| } |
| |
| standby(); |
| |
| { |
| Mutex::Autolock _l(mLock); |
| mActiveTrack.clear(); |
| mStartStopCond.broadcast(); |
| } |
| |
| releaseWakeLock(); |
| |
| ALOGV("RecordThread %p exiting", this); |
| return false; |
| } |
| |
| void AudioFlinger::RecordThread::standby() |
| { |
| if (!mStandby) { |
| inputStandBy(); |
| mStandby = true; |
| } |
| } |
| |
| void AudioFlinger::RecordThread::inputStandBy() |
| { |
| mInput->stream->common.standby(&mInput->stream->common); |
| } |
| |
| sp<AudioFlinger::RecordThread::RecordTrack> AudioFlinger::RecordThread::createRecordTrack_l( |
| const sp<AudioFlinger::Client>& client, |
| uint32_t sampleRate, |
| audio_format_t format, |
| audio_channel_mask_t channelMask, |
| size_t frameCount, |
| int sessionId, |
| IAudioFlinger::track_flags_t flags, |
| pid_t tid, |
| status_t *status) |
| { |
| sp<RecordTrack> track; |
| status_t lStatus; |
| |
| lStatus = initCheck(); |
| if (lStatus != NO_ERROR) { |
| ALOGE("Audio driver not initialized."); |
| goto Exit; |
| } |
| |
| // FIXME use flags and tid similar to createTrack_l() |
| |
| { // scope for mLock |
| Mutex::Autolock _l(mLock); |
| |
| track = new RecordTrack(this, client, sampleRate, |
| format, channelMask, frameCount, sessionId); |
| |
| if (track->getCblk() == 0) { |
| lStatus = NO_MEMORY; |
| goto Exit; |
| } |
| mTracks.add(track); |
| |
| // disable AEC and NS if the device is a BT SCO headset supporting those pre processings |
| bool suspend = audio_is_bluetooth_sco_device(mInDevice) && |
| mAudioFlinger->btNrecIsOff(); |
| setEffectSuspended_l(FX_IID_AEC, suspend, sessionId); |
| setEffectSuspended_l(FX_IID_NS, suspend, sessionId); |
| } |
| lStatus = NO_ERROR; |
| |
| Exit: |
| if (status) { |
| *status = lStatus; |
| } |
| return track; |
| } |
| |
| status_t AudioFlinger::RecordThread::start(RecordThread::RecordTrack* recordTrack, |
| AudioSystem::sync_event_t event, |
| int triggerSession) |
| { |
| ALOGV("RecordThread::start event %d, triggerSession %d", event, triggerSession); |
| sp<ThreadBase> strongMe = this; |
| status_t status = NO_ERROR; |
| |
| if (event == AudioSystem::SYNC_EVENT_NONE) { |
| clearSyncStartEvent(); |
| } else if (event != AudioSystem::SYNC_EVENT_SAME) { |
| mSyncStartEvent = mAudioFlinger->createSyncEvent(event, |
| triggerSession, |
| recordTrack->sessionId(), |
| syncStartEventCallback, |
| this); |
| // Sync event can be cancelled by the trigger session if the track is not in a |
| // compatible state in which case we start record immediately |
| if (mSyncStartEvent->isCancelled()) { |
| clearSyncStartEvent(); |
| } else { |
| // do not wait for the event for more than AudioSystem::kSyncRecordStartTimeOutMs |
| mFramestoDrop = - ((AudioSystem::kSyncRecordStartTimeOutMs * mReqSampleRate) / 1000); |
| } |
| } |
| |
| { |
| AutoMutex lock(mLock); |
| if (mActiveTrack != 0) { |
| if (recordTrack != mActiveTrack.get()) { |
| status = -EBUSY; |
| } else if (mActiveTrack->mState == TrackBase::PAUSING) { |
| mActiveTrack->mState = TrackBase::ACTIVE; |
| } |
| return status; |
| } |
| |
| recordTrack->mState = TrackBase::IDLE; |
| mActiveTrack = recordTrack; |
| mLock.unlock(); |
| status_t status = AudioSystem::startInput(mId); |
| mLock.lock(); |
| if (status != NO_ERROR) { |
| mActiveTrack.clear(); |
| clearSyncStartEvent(); |
| return status; |
| } |
| mRsmpInIndex = mFrameCount; |
| mBytesRead = 0; |
| if (mResampler != NULL) { |
| mResampler->reset(); |
| } |
| mActiveTrack->mState = TrackBase::RESUMING; |
| // signal thread to start |
| ALOGV("Signal record thread"); |
| mWaitWorkCV.broadcast(); |
| // do not wait for mStartStopCond if exiting |
| if (exitPending()) { |
| mActiveTrack.clear(); |
| status = INVALID_OPERATION; |
| goto startError; |
| } |
| mStartStopCond.wait(mLock); |
| if (mActiveTrack == 0) { |
| ALOGV("Record failed to start"); |
| status = BAD_VALUE; |
| goto startError; |
| } |
| ALOGV("Record started OK"); |
| return status; |
| } |
| startError: |
| AudioSystem::stopInput(mId); |
| clearSyncStartEvent(); |
| return status; |
| } |
| |
| void AudioFlinger::RecordThread::clearSyncStartEvent() |
| { |
| if (mSyncStartEvent != 0) { |
| mSyncStartEvent->cancel(); |
| } |
| mSyncStartEvent.clear(); |
| mFramestoDrop = 0; |
| } |
| |
| void AudioFlinger::RecordThread::syncStartEventCallback(const wp<SyncEvent>& event) |
| { |
| sp<SyncEvent> strongEvent = event.promote(); |
| |
| if (strongEvent != 0) { |
| RecordThread *me = (RecordThread *)strongEvent->cookie(); |
| me->handleSyncStartEvent(strongEvent); |
| } |
| } |
| |
| void AudioFlinger::RecordThread::handleSyncStartEvent(const sp<SyncEvent>& event) |
| { |
| if (event == mSyncStartEvent) { |
| // TODO: use actual buffer filling status instead of 2 buffers when info is available |
| // from audio HAL |
| mFramestoDrop = mFrameCount * 2; |
| } |
| } |
| |
| bool AudioFlinger::RecordThread::stop_l(RecordThread::RecordTrack* recordTrack) { |
| ALOGV("RecordThread::stop"); |
| if (recordTrack != mActiveTrack.get() || recordTrack->mState == TrackBase::PAUSING) { |
| return false; |
| } |
| recordTrack->mState = TrackBase::PAUSING; |
| // do not wait for mStartStopCond if exiting |
| if (exitPending()) { |
| return true; |
| } |
| mStartStopCond.wait(mLock); |
| // if we have been restarted, recordTrack == mActiveTrack.get() here |
| if (exitPending() || recordTrack != mActiveTrack.get()) { |
| ALOGV("Record stopped OK"); |
| return true; |
| } |
| return false; |
| } |
| |
| bool AudioFlinger::RecordThread::isValidSyncEvent(const sp<SyncEvent>& event) const |
| { |
| return false; |
| } |
| |
| status_t AudioFlinger::RecordThread::setSyncEvent(const sp<SyncEvent>& event) |
| { |
| #if 0 // This branch is currently dead code, but is preserved in case it will be needed in future |
| if (!isValidSyncEvent(event)) { |
| return BAD_VALUE; |
| } |
| |
| int eventSession = event->triggerSession(); |
| status_t ret = NAME_NOT_FOUND; |
| |
| Mutex::Autolock _l(mLock); |
| |
| for (size_t i = 0; i < mTracks.size(); i++) { |
| sp<RecordTrack> track = mTracks[i]; |
| if (eventSession == track->sessionId()) { |
| (void) track->setSyncEvent(event); |
| ret = NO_ERROR; |
| } |
| } |
| return ret; |
| #else |
| return BAD_VALUE; |
| #endif |
| } |
| |
| // destroyTrack_l() must be called with ThreadBase::mLock held |
| void AudioFlinger::RecordThread::destroyTrack_l(const sp<RecordTrack>& track) |
| { |
| track->mState = TrackBase::TERMINATED; |
| // active tracks are removed by threadLoop() |
| if (mActiveTrack != track) { |
| removeTrack_l(track); |
| } |
| } |
| |
| void AudioFlinger::RecordThread::removeTrack_l(const sp<RecordTrack>& track) |
| { |
| mTracks.remove(track); |
| // need anything related to effects here? |
| } |
| |
| void AudioFlinger::RecordThread::dump(int fd, const Vector<String16>& args) |
| { |
| dumpInternals(fd, args); |
| dumpTracks(fd, args); |
| dumpEffectChains(fd, args); |
| } |
| |
| void AudioFlinger::RecordThread::dumpInternals(int fd, const Vector<String16>& args) |
| { |
| const size_t SIZE = 256; |
| char buffer[SIZE]; |
| String8 result; |
| |
| snprintf(buffer, SIZE, "\nInput thread %p internals\n", this); |
| result.append(buffer); |
| |
| if (mActiveTrack != 0) { |
| snprintf(buffer, SIZE, "In index: %d\n", mRsmpInIndex); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "In size: %d\n", mInputBytes); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Resampling: %d\n", (mResampler != NULL)); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Out channel count: %u\n", mReqChannelCount); |
| result.append(buffer); |
| snprintf(buffer, SIZE, "Out sample rate: %u\n", mReqSampleRate); |
| result.append(buffer); |
| } else { |
| result.append("No active record client\n"); |
| } |
| |
| write(fd, result.string(), result.size()); |
| |
| dumpBase(fd, args); |
| } |
| |
| void AudioFlinger::RecordThread::dumpTracks(int fd, const Vector<String16>& args) |
| { |
| const size_t SIZE = 256; |
| char buffer[SIZE]; |
| String8 result; |
| |
| snprintf(buffer, SIZE, "Input thread %p tracks\n", this); |
| result.append(buffer); |
| RecordTrack::appendDumpHeader(result); |
| for (size_t i = 0; i < mTracks.size(); ++i) { |
| sp<RecordTrack> track = mTracks[i]; |
| if (track != 0) { |
| track->dump(buffer, SIZE); |
| result.append(buffer); |
| } |
| } |
| |
| if (mActiveTrack != 0) { |
| snprintf(buffer, SIZE, "\nInput thread %p active tracks\n", this); |
| result.append(buffer); |
| RecordTrack::appendDumpHeader(result); |
| mActiveTrack->dump(buffer, SIZE); |
| result.append(buffer); |
| |
| } |
| write(fd, result.string(), result.size()); |
| } |
| |
| // AudioBufferProvider interface |
| status_t AudioFlinger::RecordThread::getNextBuffer(AudioBufferProvider::Buffer* buffer, int64_t pts) |
| { |
| size_t framesReq = buffer->frameCount; |
| size_t framesReady = mFrameCount - mRsmpInIndex; |
| int channelCount; |
| |
| if (framesReady == 0) { |
| mBytesRead = mInput->stream->read(mInput->stream, mRsmpInBuffer, mInputBytes); |
| if (mBytesRead <= 0) { |
| if ((mBytesRead < 0) && (mActiveTrack->mState == TrackBase::ACTIVE)) { |
| ALOGE("RecordThread::getNextBuffer() Error reading audio input"); |
| // Force input into standby so that it tries to |
| // recover at next read attempt |
| inputStandBy(); |
| usleep(kRecordThreadSleepUs); |
| } |
| buffer->raw = NULL; |
| buffer->frameCount = 0; |
| return NOT_ENOUGH_DATA; |
| } |
| mRsmpInIndex = 0; |
| framesReady = mFrameCount; |
| } |
| |
| if (framesReq > framesReady) { |
| framesReq = framesReady; |
| } |
| |
| if (mChannelCount == 1 && mReqChannelCount == 2) { |
| channelCount = 1; |
| } else { |
| channelCount = 2; |
| } |
| buffer->raw = mRsmpInBuffer + mRsmpInIndex * channelCount; |
| buffer->frameCount = framesReq; |
| return NO_ERROR; |
| } |
| |
| // AudioBufferProvider interface |
| void AudioFlinger::RecordThread::releaseBuffer(AudioBufferProvider::Buffer* buffer) |
| { |
| mRsmpInIndex += buffer->frameCount; |
| buffer->frameCount = 0; |
| } |
| |
| bool AudioFlinger::RecordThread::checkForNewParameters_l() |
| { |
| bool reconfig = false; |
| |
| while (!mNewParameters.isEmpty()) { |
| status_t status = NO_ERROR; |
| String8 keyValuePair = mNewParameters[0]; |
| AudioParameter param = AudioParameter(keyValuePair); |
| int value; |
| audio_format_t reqFormat = mFormat; |
| uint32_t reqSamplingRate = mReqSampleRate; |
| uint32_t reqChannelCount = mReqChannelCount; |
| |
| if (param.getInt(String8(AudioParameter::keySamplingRate), value) == NO_ERROR) { |
| reqSamplingRate = value; |
| reconfig = true; |
| } |
| if (param.getInt(String8(AudioParameter::keyFormat), value) == NO_ERROR) { |
| reqFormat = (audio_format_t) value; |
| reconfig = true; |
| } |
| if (param.getInt(String8(AudioParameter::keyChannels), value) == NO_ERROR) { |
| reqChannelCount = popcount(value); |
| reconfig = true; |
| } |
| if (param.getInt(String8(AudioParameter::keyFrameCount), value) == NO_ERROR) { |
| // do not accept frame count changes if tracks are open as the track buffer |
| // size depends on frame count and correct behavior would not be guaranteed |
| // if frame count is changed after track creation |
| if (mActiveTrack != 0) { |
| status = INVALID_OPERATION; |
| } else { |
| reconfig = true; |
| } |
| } |
| if (param.getInt(String8(AudioParameter::keyRouting), value) == NO_ERROR) { |
| // forward device change to effects that have requested to be |
| // aware of attached audio device. |
| for (size_t i = 0; i < mEffectChains.size(); i++) { |
| mEffectChains[i]->setDevice_l(value); |
| } |
| |
| // store input device and output device but do not forward output device to audio HAL. |
| // Note that status is ignored by the caller for output device |
| // (see AudioFlinger::setParameters() |
| if (audio_is_output_devices(value)) { |
| mOutDevice = value; |
| status = BAD_VALUE; |
| } else { |
| mInDevice = value; |
| // disable AEC and NS if the device is a BT SCO headset supporting those |
| // pre processings |
| if (mTracks.size() > 0) { |
| bool suspend = audio_is_bluetooth_sco_device(mInDevice) && |
| mAudioFlinger->btNrecIsOff(); |
| for (size_t i = 0; i < mTracks.size(); i++) { |
| sp<RecordTrack> track = mTracks[i]; |
| setEffectSuspended_l(FX_IID_AEC, suspend, track->sessionId()); |
| setEffectSuspended_l(FX_IID_NS, suspend, track->sessionId()); |
| } |
| } |
| } |
| } |
| if (param.getInt(String8(AudioParameter::keyInputSource), value) == NO_ERROR && |
| mAudioSource != (audio_source_t)value) { |
| // forward device change to effects that have requested to be |
| // aware of attached audio device. |
| for (size_t i = 0; i < mEffectChains.size(); i++) { |
| mEffectChains[i]->setAudioSource_l((audio_source_t)value); |
| } |
| mAudioSource = (audio_source_t)value; |
| } |
| if (status == NO_ERROR) { |
| status = mInput->stream->common.set_parameters(&mInput->stream->common, |
| keyValuePair.string()); |
| if (status == INVALID_OPERATION) { |
| inputStandBy(); |
| status = mInput->stream->common.set_parameters(&mInput->stream->common, |
| keyValuePair.string()); |
| } |
| if (reconfig) { |
| if (status == BAD_VALUE && |
| reqFormat == mInput->stream->common.get_format(&mInput->stream->common) && |
| reqFormat == AUDIO_FORMAT_PCM_16_BIT && |
| (mInput->stream->common.get_sample_rate(&mInput->stream->common) |
| <= (2 * reqSamplingRate)) && |
| popcount(mInput->stream->common.get_channels(&mInput->stream->common)) |
| <= FCC_2 && |
| (reqChannelCount <= FCC_2)) { |
| status = NO_ERROR; |
| } |
| if (status == NO_ERROR) { |
| readInputParameters(); |
| sendIoConfigEvent_l(AudioSystem::INPUT_CONFIG_CHANGED); |
| } |
| } |
| } |
| |
| mNewParameters.removeAt(0); |
| |
| mParamStatus = status; |
| mParamCond.signal(); |
| // wait for condition with time out in case the thread calling ThreadBase::setParameters() |
| // already timed out waiting for the status and will never signal the condition. |
| mWaitWorkCV.waitRelative(mLock, kSetParametersTimeoutNs); |
| } |
| return reconfig; |
| } |
| |
| String8 AudioFlinger::RecordThread::getParameters(const String8& keys) |
| { |
| char *s; |
| String8 out_s8 = String8(); |
| |
| Mutex::Autolock _l(mLock); |
| if (initCheck() != NO_ERROR) { |
| return out_s8; |
| } |
| |
| s = mInput->stream->common.get_parameters(&mInput->stream->common, keys.string()); |
| out_s8 = String8(s); |
| free(s); |
| return out_s8; |
| } |
| |
| void AudioFlinger::RecordThread::audioConfigChanged_l(int event, int param) { |
| AudioSystem::OutputDescriptor desc; |
| void *param2 = NULL; |
| |
| switch (event) { |
| case AudioSystem::INPUT_OPENED: |
| case AudioSystem::INPUT_CONFIG_CHANGED: |
| desc.channels = mChannelMask; |
| desc.samplingRate = mSampleRate; |
| desc.format = mFormat; |
| desc.frameCount = mFrameCount; |
| desc.latency = 0; |
| param2 = &desc; |
| break; |
| |
| case AudioSystem::INPUT_CLOSED: |
| default: |
| break; |
| } |
| mAudioFlinger->audioConfigChanged_l(event, mId, param2); |
| } |
| |
| void AudioFlinger::RecordThread::readInputParameters() |
| { |
| delete mRsmpInBuffer; |
| // mRsmpInBuffer is always assigned a new[] below |
| delete mRsmpOutBuffer; |
| mRsmpOutBuffer = NULL; |
| delete mResampler; |
| mResampler = NULL; |
| |
| mSampleRate = mInput->stream->common.get_sample_rate(&mInput->stream->common); |
| mChannelMask = mInput->stream->common.get_channels(&mInput->stream->common); |
| mChannelCount = (uint16_t)popcount(mChannelMask); |
| mFormat = mInput->stream->common.get_format(&mInput->stream->common); |
| mFrameSize = audio_stream_frame_size(&mInput->stream->common); |
| mInputBytes = mInput->stream->common.get_buffer_size(&mInput->stream->common); |
| mFrameCount = mInputBytes / mFrameSize; |
| mNormalFrameCount = mFrameCount; // not used by record, but used by input effects |
| mRsmpInBuffer = new int16_t[mFrameCount * mChannelCount]; |
| |
| if (mSampleRate != mReqSampleRate && mChannelCount <= FCC_2 && mReqChannelCount <= FCC_2) |
| { |
| int channelCount; |
| // optimization: if mono to mono, use the resampler in stereo to stereo mode to avoid |
| // stereo to mono post process as the resampler always outputs stereo. |
| if (mChannelCount == 1 && mReqChannelCount == 2) { |
| channelCount = 1; |
| } else { |
| channelCount = 2; |
| } |
| mResampler = AudioResampler::create(16, channelCount, mReqSampleRate); |
| mResampler->setSampleRate(mSampleRate); |
| mResampler->setVolume(AudioMixer::UNITY_GAIN, AudioMixer::UNITY_GAIN); |
| mRsmpOutBuffer = new int32_t[mFrameCount * 2]; |
| |
| // optmization: if mono to mono, alter input frame count as if we were inputing |
| // stereo samples |
| if (mChannelCount == 1 && mReqChannelCount == 1) { |
| mFrameCount >>= 1; |
| } |
| |
| } |
| mRsmpInIndex = mFrameCount; |
| } |
| |
| unsigned int AudioFlinger::RecordThread::getInputFramesLost() |
| { |
| Mutex::Autolock _l(mLock); |
| if (initCheck() != NO_ERROR) { |
| return 0; |
| } |
| |
| return mInput->stream->get_input_frames_lost(mInput->stream); |
| } |
| |
| uint32_t AudioFlinger::RecordThread::hasAudioSession(int sessionId) const |
| { |
| Mutex::Autolock _l(mLock); |
| uint32_t result = 0; |
| if (getEffectChain_l(sessionId) != 0) { |
| result = EFFECT_SESSION; |
| } |
| |
| for (size_t i = 0; i < mTracks.size(); ++i) { |
| if (sessionId == mTracks[i]->sessionId()) { |
| result |= TRACK_SESSION; |
| break; |
| } |
| } |
| |
| return result; |
| } |
| |
| KeyedVector<int, bool> AudioFlinger::RecordThread::sessionIds() const |
| { |
| KeyedVector<int, bool> ids; |
| Mutex::Autolock _l(mLock); |
| for (size_t j = 0; j < mTracks.size(); ++j) { |
| sp<RecordThread::RecordTrack> track = mTracks[j]; |
| int sessionId = track->sessionId(); |
| if (ids.indexOfKey(sessionId) < 0) { |
| ids.add(sessionId, true); |
| } |
| } |
| return ids; |
| } |
| |
| AudioFlinger::AudioStreamIn* AudioFlinger::RecordThread::clearInput() |
| { |
| Mutex::Autolock _l(mLock); |
| AudioStreamIn *input = mInput; |
| mInput = NULL; |
| return input; |
| } |
| |
| // this method must always be called either with ThreadBase mLock held or inside the thread loop |
| audio_stream_t* AudioFlinger::RecordThread::stream() const |
| { |
| if (mInput == NULL) { |
| return NULL; |
| } |
| return &mInput->stream->common; |
| } |
| |
| status_t AudioFlinger::RecordThread::addEffectChain_l(const sp<EffectChain>& chain) |
| { |
| // only one chain per input thread |
| if (mEffectChains.size() != 0) { |
| return INVALID_OPERATION; |
| } |
| ALOGV("addEffectChain_l() %p on thread %p", chain.get(), this); |
| |
| chain->setInBuffer(NULL); |
| chain->setOutBuffer(NULL); |
| |
| checkSuspendOnAddEffectChain_l(chain); |
| |
| mEffectChains.add(chain); |
| |
| return NO_ERROR; |
| } |
| |
| size_t AudioFlinger::RecordThread::removeEffectChain_l(const sp<EffectChain>& chain) |
| { |
| ALOGV("removeEffectChain_l() %p from thread %p", chain.get(), this); |
| ALOGW_IF(mEffectChains.size() != 1, |
| "removeEffectChain_l() %p invalid chain size %d on thread %p", |
| chain.get(), mEffectChains.size(), this); |
| if (mEffectChains.size() == 1) { |
| mEffectChains.removeAt(0); |
| } |
| return 0; |
| } |
| |
| }; // namespace android |