| /* |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "Camera3-InputStream" |
| #define ATRACE_TAG ATRACE_TAG_CAMERA |
| //#define LOG_NDEBUG 0 |
| |
| #include <utils/Log.h> |
| #include <utils/Trace.h> |
| #include "Camera3InputStream.h" |
| |
| namespace android { |
| |
| namespace camera3 { |
| |
| Camera3InputStream::Camera3InputStream(int id, |
| uint32_t width, uint32_t height, int format) : |
| Camera3IOStreamBase(id, CAMERA3_STREAM_INPUT, width, height, |
| /*maxSize*/0, format) { |
| |
| if (format == HAL_PIXEL_FORMAT_BLOB) { |
| ALOGE("%s: Bad format, BLOB not supported", __FUNCTION__); |
| mState = STATE_ERROR; |
| } |
| } |
| |
| Camera3InputStream::~Camera3InputStream() { |
| disconnectLocked(); |
| } |
| |
| status_t Camera3InputStream::getInputBufferLocked( |
| camera3_stream_buffer *buffer) { |
| ATRACE_CALL(); |
| status_t res; |
| |
| // FIXME: will not work in (re-)registration |
| if (mState == STATE_IN_CONFIG || mState == STATE_IN_RECONFIG) { |
| ALOGE("%s: Stream %d: Buffer registration for input streams" |
| " not implemented (state %d)", |
| __FUNCTION__, mId, mState); |
| return INVALID_OPERATION; |
| } |
| |
| if ((res = getBufferPreconditionCheckLocked()) != OK) { |
| return res; |
| } |
| |
| ANativeWindowBuffer* anb; |
| int fenceFd; |
| |
| assert(mConsumer != 0); |
| |
| BufferItem bufferItem; |
| res = mConsumer->acquireBuffer(&bufferItem, /*waitForFence*/false); |
| |
| if (res != OK) { |
| ALOGE("%s: Stream %d: Can't acquire next output buffer: %s (%d)", |
| __FUNCTION__, mId, strerror(-res), res); |
| return res; |
| } |
| |
| anb = bufferItem.mGraphicBuffer->getNativeBuffer(); |
| assert(anb != NULL); |
| fenceFd = bufferItem.mFence->dup(); |
| |
| /** |
| * FenceFD now owned by HAL except in case of error, |
| * in which case we reassign it to acquire_fence |
| */ |
| handoutBufferLocked(*buffer, &(anb->handle), /*acquireFence*/fenceFd, |
| /*releaseFence*/-1, CAMERA3_BUFFER_STATUS_OK); |
| mBuffersInFlight.push_back(bufferItem); |
| |
| return OK; |
| } |
| |
| status_t Camera3InputStream::returnBufferCheckedLocked( |
| const camera3_stream_buffer &buffer, |
| nsecs_t timestamp, |
| bool output, |
| /*out*/ |
| sp<Fence> *releaseFenceOut) { |
| |
| (void)timestamp; |
| (void)output; |
| ALOG_ASSERT(!output, "Expected output to be false"); |
| |
| status_t res; |
| |
| bool bufferFound = false; |
| BufferItem bufferItem; |
| { |
| // Find the buffer we are returning |
| Vector<BufferItem>::iterator it, end; |
| for (it = mBuffersInFlight.begin(), end = mBuffersInFlight.end(); |
| it != end; |
| ++it) { |
| |
| const BufferItem& tmp = *it; |
| ANativeWindowBuffer *anb = tmp.mGraphicBuffer->getNativeBuffer(); |
| if (anb != NULL && &(anb->handle) == buffer.buffer) { |
| bufferFound = true; |
| bufferItem = tmp; |
| mBuffersInFlight.erase(it); |
| mDequeuedBufferCount--; |
| } |
| } |
| } |
| if (!bufferFound) { |
| ALOGE("%s: Stream %d: Can't return buffer that wasn't sent to HAL", |
| __FUNCTION__, mId); |
| return INVALID_OPERATION; |
| } |
| |
| if (buffer.status == CAMERA3_BUFFER_STATUS_ERROR) { |
| if (buffer.release_fence != -1) { |
| ALOGE("%s: Stream %d: HAL should not set release_fence(%d) when " |
| "there is an error", __FUNCTION__, mId, buffer.release_fence); |
| close(buffer.release_fence); |
| } |
| |
| /** |
| * Reassign release fence as the acquire fence incase of error |
| */ |
| const_cast<camera3_stream_buffer*>(&buffer)->release_fence = |
| buffer.acquire_fence; |
| } |
| |
| /** |
| * Unconditionally return buffer to the buffer queue. |
| * - Fwk takes over the release_fence ownership |
| */ |
| sp<Fence> releaseFence = new Fence(buffer.release_fence); |
| res = mConsumer->releaseBuffer(bufferItem, releaseFence); |
| if (res != OK) { |
| ALOGE("%s: Stream %d: Error releasing buffer back to buffer queue:" |
| " %s (%d)", __FUNCTION__, mId, strerror(-res), res); |
| return res; |
| } |
| |
| *releaseFenceOut = releaseFence; |
| |
| return OK; |
| } |
| |
| status_t Camera3InputStream::returnInputBufferLocked( |
| const camera3_stream_buffer &buffer) { |
| ATRACE_CALL(); |
| |
| return returnAnyBufferLocked(buffer, /*timestamp*/0, /*output*/false); |
| } |
| |
| status_t Camera3InputStream::disconnectLocked() { |
| |
| status_t res; |
| |
| if ((res = Camera3IOStreamBase::disconnectLocked()) != OK) { |
| return res; |
| } |
| |
| assert(mBuffersInFlight.size() == 0); |
| |
| /** |
| * no-op since we can't disconnect the producer from the consumer-side |
| */ |
| |
| mState = (mState == STATE_IN_RECONFIG) ? STATE_IN_CONFIG |
| : STATE_CONSTRUCTED; |
| return OK; |
| } |
| |
| sp<IGraphicBufferProducer> Camera3InputStream::getProducerInterface() const { |
| return mConsumer->getProducerInterface(); |
| } |
| |
| void Camera3InputStream::dump(int fd, const Vector<String16> &args) const { |
| (void) args; |
| String8 lines; |
| lines.appendFormat(" Stream[%d]: Input\n", mId); |
| write(fd, lines.string(), lines.size()); |
| |
| Camera3IOStreamBase::dump(fd, args); |
| } |
| |
| status_t Camera3InputStream::configureQueueLocked() { |
| status_t res; |
| |
| if ((res = Camera3IOStreamBase::configureQueueLocked()) != OK) { |
| return res; |
| } |
| |
| assert(mMaxSize == 0); |
| assert(camera3_stream::format != HAL_PIXEL_FORMAT_BLOB); |
| |
| mTotalBufferCount = BufferQueue::MIN_UNDEQUEUED_BUFFERS + |
| camera3_stream::max_buffers; |
| mDequeuedBufferCount = 0; |
| mFrameCount = 0; |
| |
| if (mConsumer.get() == 0) { |
| mConsumer = new BufferItemConsumer(camera3_stream::usage, |
| mTotalBufferCount, |
| /*synchronousMode*/true); |
| mConsumer->setName(String8::format("Camera3-InputStream-%d", mId)); |
| } |
| |
| res = mConsumer->setDefaultBufferSize(camera3_stream::width, |
| camera3_stream::height); |
| if (res != OK) { |
| ALOGE("%s: Stream %d: Could not set buffer dimensions %dx%d", |
| __FUNCTION__, mId, camera3_stream::width, camera3_stream::height); |
| return res; |
| } |
| res = mConsumer->setDefaultBufferFormat(camera3_stream::format); |
| if (res != OK) { |
| ALOGE("%s: Stream %d: Could not set buffer format %d", |
| __FUNCTION__, mId, camera3_stream::format); |
| return res; |
| } |
| |
| return OK; |
| } |
| |
| }; // namespace camera3 |
| |
| }; // namespace android |