bcm4329/src/bcmsdio/sys/bcmsdh_linux.c - platform/hardware/broadcom/wlan - Git at Google

 /*
  * SDIO access interface for drivers - linux specific (pci only)
  *
  * Copyright (C) 1999-2010, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2 (the "GPL"),
  * available at http://www.broadcom.com/licenses/GPLv2.php, with the
  * following added to such license:
  *
  *      As a special exception, the copyright holders of this software give you
  * permission to link this software with independent modules, and to copy and
  * distribute the resulting executable under terms of your choice, provided that
  * you also meet, for each linked independent module, the terms and conditions of
  * the license of that module.  An independent module is a module which is not
  * derived from this software.  The special exception does not apply to any
  * modifications of the software.
  *
  *      Notwithstanding the above, under no circumstances may you combine this
  * software in any way with any other Broadcom software provided under a license
  * other than the GPL, without Broadcom's express prior written consent.
  *
  * $Id: bcmsdh_linux.c,v 1.42.10.10.2.14.4.2 2010/09/15 00:30:11 Exp $
  */

 /**
  * @file bcmsdh_linux.c
  */

 #define __UNDEF_NO_VERSION__

 #include <typedefs.h>
 #include <linuxver.h>

 #include <linux/pci.h>
 #include <linux/completion.h>

 #include <osl.h>
 #include <pcicfg.h>
 #include <bcmdefs.h>
 #include <bcmdevs.h>

 #if defined(OOB_INTR_ONLY)
 #include <linux/irq.h>
 extern void dhdsdio_isr(void * args);
 #include <bcmutils.h>
 #include <dngl_stats.h>
 #include <dhd.h>
 #endif /* defined(OOB_INTR_ONLY) */
 #if defined(CONFIG_MACH_SANDGATE2G) || defined(CONFIG_MACH_LOGICPD_PXA270)
 #if !defined(BCMPLATFORM_BUS)
 #define BCMPLATFORM_BUS
 #endif /* !defined(BCMPLATFORM_BUS) */

 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
 #include <linux/platform_device.h>
 #endif /* KERNEL_VERSION(2, 6, 19) */
 #endif /* CONFIG_MACH_SANDGATE2G || CONFIG_MACH_LOGICPD_PXA270 */

 /**
  * SDIO Host Controller info
  */
 typedef struct bcmsdh_hc bcmsdh_hc_t;

 struct bcmsdh_hc {
 	bcmsdh_hc_t *next;
 #ifdef BCMPLATFORM_BUS
 	struct device *dev;			/* platform device handle */
 #else
 	struct pci_dev *dev;		/* pci device handle */
 #endif /* BCMPLATFORM_BUS */
 	osl_t *osh;
 	void *regs;			/* SDIO Host Controller address */
 	bcmsdh_info_t *sdh;		/* SDIO Host Controller handle */
 	void *ch;
 	unsigned int oob_irq;
 	unsigned long oob_flags; /* OOB Host specifiction as edge and etc */
 	bool oob_irq_registered;
 #if defined(OOB_INTR_ONLY)
 	spinlock_t irq_lock;
 #endif
 };
 static bcmsdh_hc_t *sdhcinfo = NULL;

 /* driver info, initialized when bcmsdh_register is called */
 static bcmsdh_driver_t drvinfo = {NULL, NULL};

 /* debugging macros */
 #define SDLX_MSG(x)

 /**
  * Checks to see if vendor and device IDs match a supported SDIO Host Controller.
  */
 bool
 bcmsdh_chipmatch(uint16 vendor, uint16 device)
 {
 	/* Add other vendors and devices as required */

 #ifdef BCMSDIOH_STD
 	/* Check for Arasan host controller */
 	if (vendor == VENDOR_SI_IMAGE) {
 		return (TRUE);
 	}
 	/* Check for BRCM 27XX Standard host controller */
 	if (device == BCM27XX_SDIOH_ID && vendor == VENDOR_BROADCOM) {
 		return (TRUE);
 	}
 	/* Check for BRCM Standard host controller */
 	if (device == SDIOH_FPGA_ID && vendor == VENDOR_BROADCOM) {
 		return (TRUE);
 	}
 	/* Check for TI PCIxx21 Standard host controller */
 	if (device == PCIXX21_SDIOH_ID && vendor == VENDOR_TI) {
 		return (TRUE);
 	}
 	if (device == PCIXX21_SDIOH0_ID && vendor == VENDOR_TI) {
 		return (TRUE);
 	}
 	/* Ricoh R5C822 Standard SDIO Host */
 	if (device == R5C822_SDIOH_ID && vendor == VENDOR_RICOH) {
 		return (TRUE);
 	}
 	/* JMicron Standard SDIO Host */
 	if (device == JMICRON_SDIOH_ID && vendor == VENDOR_JMICRON) {
 		return (TRUE);
 	}

 #endif /* BCMSDIOH_STD */
 #ifdef BCMSDIOH_SPI
 	/* This is the PciSpiHost. */
 	if (device == SPIH_FPGA_ID && vendor == VENDOR_BROADCOM) {
 		printf("Found PCI SPI Host Controller\n");
 		return (TRUE);
 	}

 #endif /* BCMSDIOH_SPI */

 	return (FALSE);
 }

 #if defined(BCMPLATFORM_BUS)
 #if defined(BCMLXSDMMC)
 /* forward declarations */
 int bcmsdh_probe(struct device *dev);
 int bcmsdh_remove(struct device *dev);

 EXPORT_SYMBOL(bcmsdh_probe);
 EXPORT_SYMBOL(bcmsdh_remove);

 #else
 /* forward declarations */
 static int __devinit bcmsdh_probe(struct device *dev);
 static int __devexit bcmsdh_remove(struct device *dev);
 #endif /* BCMLXSDMMC */

 #ifndef BCMLXSDMMC
 static struct device_driver bcmsdh_driver = {
 	.name		= "pxa2xx-mci",
 	.bus		= &platform_bus_type,
 	.probe		= bcmsdh_probe,
 	.remove		= bcmsdh_remove,
 	.suspend	= NULL,
 	.resume		= NULL,
 	};
 #endif /* BCMLXSDMMC */

 #ifndef BCMLXSDMMC
 static
 #endif /* BCMLXSDMMC */
 int bcmsdh_probe(struct device *dev)
 {
 	osl_t *osh = NULL;
 	bcmsdh_hc_t *sdhc = NULL;
 	ulong regs = 0;
 	bcmsdh_info_t *sdh = NULL;
 #if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
 	struct platform_device *pdev;
 	struct resource *r;
 #endif /* BCMLXSDMMC */
 	int irq = 0;
 	uint32 vendevid;
 	unsigned long irq_flags = 0;

 #if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
 	pdev = to_platform_device(dev);
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
 	if (!r || irq == NO_IRQ)
 		return -ENXIO;
 #endif /* BCMLXSDMMC */

 #if defined(OOB_INTR_ONLY)
 #ifdef HW_OOB
 	irq_flags = \
 		IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL | IORESOURCE_IRQ_SHAREABLE;
 #else
 	 irq_flags = IRQF_TRIGGER_FALLING;
 #endif /* HW_OOB */
 	irq = dhd_customer_oob_irq_map(&irq_flags);
 	if  (irq < 0) {
 		SDLX_MSG(("%s: Host irq is not defined\n", __FUNCTION__));
 		return 1;
 	}
 #endif /* defined(OOB_INTR_ONLY) */
 	/* allocate SDIO Host Controller state info */
 	if (!(osh = osl_attach(dev, PCI_BUS, FALSE))) {
 		SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
 		goto err;
 	}
 	if (!(sdhc = MALLOC(osh, sizeof(bcmsdh_hc_t)))) {
 		SDLX_MSG(("%s: out of memory, allocated %d bytes\n",
 			__FUNCTION__,
 			MALLOCED(osh)));
 		goto err;
 	}
 	bzero(sdhc, sizeof(bcmsdh_hc_t));
 	sdhc->osh = osh;

 	sdhc->dev = (void *)dev;

 #ifdef BCMLXSDMMC
 	if (!(sdh = bcmsdh_attach(osh, (void *)0,
 	                          (void **)&regs, irq))) {
 		SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
 		goto err;
 	}
 #else
 	if (!(sdh = bcmsdh_attach(osh, (void *)r->start,
 	                          (void **)&regs, irq))) {
 		SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
 		goto err;
 	}
 #endif /* BCMLXSDMMC */
 	sdhc->sdh = sdh;
 	sdhc->oob_irq = irq;
 	sdhc->oob_flags = irq_flags;
 	sdhc->oob_irq_registered = FALSE;	/* to make sure.. */
 #if defined(OOB_INTR_ONLY)
 	spin_lock_init(&sdhc->irq_lock);
 #endif

 	/* chain SDIO Host Controller info together */
 	sdhc->next = sdhcinfo;
 	sdhcinfo = sdhc;
 	/* Read the vendor/device ID from the CIS */
 	vendevid = bcmsdh_query_device(sdh);

 	/* try to attach to the target device */
 	if (!(sdhc->ch = drvinfo.attach((vendevid >> 16),
 	                                 (vendevid & 0xFFFF), 0, 0, 0, 0,
 	                                (void *)regs, NULL, sdh))) {
 		SDLX_MSG(("%s: device attach failed\n", __FUNCTION__));
 		goto err;
 	}

 	return 0;

 	/* error handling */
 err:
 	if (sdhc) {
 		if (sdhc->sdh)
 			bcmsdh_detach(sdhc->osh, sdhc->sdh);
 		MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
 	}
 	if (osh)
 		osl_detach(osh);
 	return -ENODEV;
 }

 #ifndef BCMLXSDMMC
 static
 #endif /* BCMLXSDMMC */
 int bcmsdh_remove(struct device *dev)
 {
 	bcmsdh_hc_t *sdhc, *prev;
 	osl_t *osh;

 	sdhc = sdhcinfo;
 	drvinfo.detach(sdhc->ch);
 	bcmsdh_detach(sdhc->osh, sdhc->sdh);
 	/* find the SDIO Host Controller state for this pdev and take it out from the list */
 	for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
 		if (sdhc->dev == (void *)dev) {
 			if (prev)
 				prev->next = sdhc->next;
 			else
 				sdhcinfo = NULL;
 			break;
 		}
 		prev = sdhc;
 	}
 	if (!sdhc) {
 		SDLX_MSG(("%s: failed\n", __FUNCTION__));
 		return 0;
 	}


 	/* release SDIO Host Controller info */
 	osh = sdhc->osh;
 	MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
 	osl_detach(osh);

 #if !defined(BCMLXSDMMC)
 	dev_set_drvdata(dev, NULL);
 #endif /* !defined(BCMLXSDMMC) */

 	return 0;
 }

 #else /* BCMPLATFORM_BUS */

 #if !defined(BCMLXSDMMC)
 /* forward declarations for PCI probe and remove functions. */
 static int __devinit bcmsdh_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
 static void __devexit bcmsdh_pci_remove(struct pci_dev *pdev);

 /**
  * pci id table
  */
 static struct pci_device_id bcmsdh_pci_devid[] __devinitdata = {
 	{ vendor: PCI_ANY_ID,
 	device: PCI_ANY_ID,
 	subvendor: PCI_ANY_ID,
 	subdevice: PCI_ANY_ID,
 	class: 0,
 	class_mask: 0,
 	driver_data: 0,
 	},
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, bcmsdh_pci_devid);

 /**
  * SDIO Host Controller pci driver info
  */
 static struct pci_driver bcmsdh_pci_driver = {
 	node:		{},
 	name:		"bcmsdh",
 	id_table:	bcmsdh_pci_devid,
 	probe:		bcmsdh_pci_probe,
 	remove:		bcmsdh_pci_remove,
 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
 	save_state:	NULL,
 #endif
 	suspend:	NULL,
 	resume:		NULL,
 };


 extern uint sd_pci_slot;	/* Force detection to a particular PCI */
 				/* slot only . Allows for having multiple */
 				/* WL devices at once in a PC */
 				/* Only one instance of dhd will be */
 				/* usable at a time */
 				/* Upper word is bus number, */
 				/* lower word is slot number */
 				/* Default value of 0xFFFFffff turns this */
 				/* off */
 module_param(sd_pci_slot, uint, 0);


 /**
  * Detect supported SDIO Host Controller and attach if found.
  *
  * Determine if the device described by pdev is a supported SDIO Host
  * Controller.  If so, attach to it and attach to the target device.
  */
 static int __devinit
 bcmsdh_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	osl_t *osh = NULL;
 	bcmsdh_hc_t *sdhc = NULL;
 	ulong regs;
 	bcmsdh_info_t *sdh = NULL;
 	int rc;

 	if (sd_pci_slot != 0xFFFFffff) {
 		if (pdev->bus->number != (sd_pci_slot>>16) ||
 			PCI_SLOT(pdev->devfn) != (sd_pci_slot&0xffff)) {
 			SDLX_MSG(("%s: %s: bus %X, slot %X, vend %X, dev %X\n",
 			          __FUNCTION__,
 			          bcmsdh_chipmatch(pdev->vendor, pdev->device) ?
 			          "Found compatible SDIOHC" :
 			          "Probing unknown device",
 			          pdev->bus->number, PCI_SLOT(pdev->devfn),
 			          pdev->vendor, pdev->device));
 			return -ENODEV;
 		}
 		SDLX_MSG(("%s: %s: bus %X, slot %X, vendor %X, device %X (good PCI location)\n",
 		          __FUNCTION__,
 		          bcmsdh_chipmatch(pdev->vendor, pdev->device) ?
 		          "Using compatible SDIOHC" :
 		          "WARNING, forced use of unkown device",
 		          pdev->bus->number, PCI_SLOT(pdev->devfn),
 		          pdev->vendor, pdev->device));
 	}

 	if ((pdev->vendor == VENDOR_TI) && ((pdev->device == PCIXX21_FLASHMEDIA_ID) ||
 	    (pdev->device == PCIXX21_FLASHMEDIA0_ID))) {
 		uint32 config_reg;

 		SDLX_MSG(("%s: Disabling TI FlashMedia Controller.\n", __FUNCTION__));
 		if (!(osh = osl_attach(pdev, PCI_BUS, FALSE))) {
 			SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
 			goto err;
 		}

 		config_reg = OSL_PCI_READ_CONFIG(osh, 0x4c, 4);

 		/*
 		 * Set MMC_SD_DIS bit in FlashMedia Controller.
 		 * Disbling the SD/MMC Controller in the FlashMedia Controller
 		 * allows the Standard SD Host Controller to take over control
 		 * of the SD Slot.
 		 */
 		config_reg |= 0x02;
 		OSL_PCI_WRITE_CONFIG(osh, 0x4c, 4, config_reg);
 		osl_detach(osh);
 	}
 	/* match this pci device with what we support */
 	/* we can't solely rely on this to believe it is our SDIO Host Controller! */
 	if (!bcmsdh_chipmatch(pdev->vendor, pdev->device)) {
 		return -ENODEV;
 	}

 	/* this is a pci device we might support */
 	SDLX_MSG(("%s: Found possible SDIO Host Controller: bus %d slot %d func %d irq %d\n",
 		__FUNCTION__,
 		pdev->bus->number, PCI_SLOT(pdev->devfn),
 		PCI_FUNC(pdev->devfn), pdev->irq));

 	/* use bcmsdh_query_device() to get the vendor ID of the target device so
 	 * it will eventually appear in the Broadcom string on the console
 	 */

 	/* allocate SDIO Host Controller state info */
 	if (!(osh = osl_attach(pdev, PCI_BUS, FALSE))) {
 		SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
 		goto err;
 	}
 	if (!(sdhc = MALLOC(osh, sizeof(bcmsdh_hc_t)))) {
 		SDLX_MSG(("%s: out of memory, allocated %d bytes\n",
 			__FUNCTION__,
 			MALLOCED(osh)));
 		goto err;
 	}
 	bzero(sdhc, sizeof(bcmsdh_hc_t));
 	sdhc->osh = osh;

 	sdhc->dev = pdev;

 	/* map to address where host can access */
 	pci_set_master(pdev);
 	rc = pci_enable_device(pdev);
 	if (rc) {
 		SDLX_MSG(("%s: Cannot enable PCI device\n", __FUNCTION__));
 		goto err;
 	}
 	if (!(sdh = bcmsdh_attach(osh, (void *)(uintptr)pci_resource_start(pdev, 0),
 	                          (void **)&regs, pdev->irq))) {
 		SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
 		goto err;
 	}

 	sdhc->sdh = sdh;

 	/* try to attach to the target device */
 	if (!(sdhc->ch = drvinfo.attach(VENDOR_BROADCOM, /* pdev->vendor, */
 	                                bcmsdh_query_device(sdh) & 0xFFFF, 0, 0, 0, 0,
 	                                (void *)regs, NULL, sdh))) {
 		SDLX_MSG(("%s: device attach failed\n", __FUNCTION__));
 		goto err;
 	}

 	/* chain SDIO Host Controller info together */
 	sdhc->next = sdhcinfo;
 	sdhcinfo = sdhc;

 	return 0;

 	/* error handling */
 err:
 	if (sdhc->sdh)
 		bcmsdh_detach(sdhc->osh, sdhc->sdh);
 	if (sdhc)
 		MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
 	if (osh)
 		osl_detach(osh);
 	return -ENODEV;
 }


 /**
  * Detach from target devices and SDIO Host Controller
  */
 static void __devexit
 bcmsdh_pci_remove(struct pci_dev *pdev)
 {
 	bcmsdh_hc_t *sdhc, *prev;
 	osl_t *osh;

 	/* find the SDIO Host Controller state for this pdev and take it out from the list */
 	for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
 		if (sdhc->dev == pdev) {
 			if (prev)
 				prev->next = sdhc->next;
 			else
 				sdhcinfo = NULL;
 			break;
 		}
 		prev = sdhc;
 	}
 	if (!sdhc)
 		return;

 	drvinfo.detach(sdhc->ch);

 	bcmsdh_detach(sdhc->osh, sdhc->sdh);

 	/* release SDIO Host Controller info */
 	osh = sdhc->osh;
 	MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
 	osl_detach(osh);
 }
 #endif /* BCMLXSDMMC */
 #endif /* BCMPLATFORM_BUS */

 extern int sdio_function_init(void);

 int
 bcmsdh_register(bcmsdh_driver_t *driver)
 {
 	int error = 0;

 	drvinfo = *driver;

 #if defined(BCMPLATFORM_BUS)
 #if defined(BCMLXSDMMC)
 	SDLX_MSG(("Linux Kernel SDIO/MMC Driver\n"));
 	error = sdio_function_init();
 #else
 	SDLX_MSG(("Intel PXA270 SDIO Driver\n"));
 	error = driver_register(&bcmsdh_driver);
 #endif /* defined(BCMLXSDMMC) */
 	return error;
 #endif /* defined(BCMPLATFORM_BUS) */

 #if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
 	if (!(error = pci_module_init(&bcmsdh_pci_driver)))
 		return 0;
 #else
 	if (!(error = pci_register_driver(&bcmsdh_pci_driver)))
 		return 0;
 #endif

 	SDLX_MSG(("%s: pci_module_init failed 0x%x\n", __FUNCTION__, error));
 #endif /* BCMPLATFORM_BUS */

 	return error;
 }

 extern void sdio_function_cleanup(void);

 void
 bcmsdh_unregister(void)
 {
 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
 	if (bcmsdh_pci_driver.node.next)
 #endif

 #if defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
 		driver_unregister(&bcmsdh_driver);
 #endif
 #if defined(BCMLXSDMMC)
 	sdio_function_cleanup();
 #endif /* BCMLXSDMMC */
 #if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
 		pci_unregister_driver(&bcmsdh_pci_driver);
 #endif /* BCMPLATFORM_BUS */
 }


 #if defined(OOB_INTR_ONLY)
 void bcmsdh_oob_intr_set(bool enable)
 {
 	static bool curstate = 1;
 	unsigned long flags;

 	spin_lock_irqsave(&sdhcinfo->irq_lock, flags);
 	if (curstate != enable) {
 		if (enable)
 			enable_irq(sdhcinfo->oob_irq);
 		else
 			disable_irq_nosync(sdhcinfo->oob_irq);
 		curstate = enable;
 	}
 	spin_unlock_irqrestore(&sdhcinfo->irq_lock, flags);
 }

 static irqreturn_t wlan_oob_irq(int irq, void *dev_id)
 {
 	dhd_pub_t *dhdp;

 	dhdp = (dhd_pub_t *)dev_get_drvdata(sdhcinfo->dev);

 	bcmsdh_oob_intr_set(0);

 	if (dhdp == NULL) {
 		SDLX_MSG(("Out of band GPIO interrupt fired way too early\n"));
 		return IRQ_HANDLED;
 	}

 	dhdsdio_isr((void *)dhdp->bus);

 	return IRQ_HANDLED;
 }

 int bcmsdh_register_oob_intr(void * dhdp)
 {
 	int error = 0;

 	SDLX_MSG(("%s Enter\n", __FUNCTION__));

 	dev_set_drvdata(sdhcinfo->dev, dhdp);

 	if (!sdhcinfo->oob_irq_registered) {
 		SDLX_MSG(("%s IRQ=%d Type=%X \n", __FUNCTION__, \
 				(int)sdhcinfo->oob_irq, (int)sdhcinfo->oob_flags));
 		/* Refer to customer Host IRQ docs about proper irqflags definition */
 		error = request_irq(sdhcinfo->oob_irq, wlan_oob_irq, sdhcinfo->oob_flags,
 			"bcmsdh_sdmmc", NULL);
 		if (error)
 			return -ENODEV;

 		set_irq_wake(sdhcinfo->oob_irq, 1);
 		sdhcinfo->oob_irq_registered = TRUE;
 	}

 	return 0;
 }

 void bcmsdh_unregister_oob_intr(void)
 {
 	SDLX_MSG(("%s: Enter\n", __FUNCTION__));

 	set_irq_wake(sdhcinfo->oob_irq, 0);
 	disable_irq(sdhcinfo->oob_irq);	/* just in case.. */
 	free_irq(sdhcinfo->oob_irq, NULL);
 	sdhcinfo->oob_irq_registered = FALSE;
 }
 #endif /* defined(OOB_INTR_ONLY) */
 /* Module parameters specific to each host-controller driver */

 extern uint sd_msglevel;	/* Debug message level */
 module_param(sd_msglevel, uint, 0);

 extern uint sd_power;	/* 0 = SD Power OFF, 1 = SD Power ON. */
 module_param(sd_power, uint, 0);

 extern uint sd_clock;	/* SD Clock Control, 0 = SD Clock OFF, 1 = SD Clock ON */
 module_param(sd_clock, uint, 0);

 extern uint sd_divisor;	/* Divisor (-1 means external clock) */
 module_param(sd_divisor, uint, 0);

 extern uint sd_sdmode;	/* Default is SD4, 0=SPI, 1=SD1, 2=SD4 */
 module_param(sd_sdmode, uint, 0);

 extern uint sd_hiok;	/* Ok to use hi-speed mode */
 module_param(sd_hiok, uint, 0);

 extern uint sd_f2_blocksize;
 module_param(sd_f2_blocksize, int, 0);


 #ifdef BCMSDH_MODULE
 EXPORT_SYMBOL(bcmsdh_attach);
 EXPORT_SYMBOL(bcmsdh_detach);
 EXPORT_SYMBOL(bcmsdh_intr_query);
 EXPORT_SYMBOL(bcmsdh_intr_enable);
 EXPORT_SYMBOL(bcmsdh_intr_disable);
 EXPORT_SYMBOL(bcmsdh_intr_reg);
 EXPORT_SYMBOL(bcmsdh_intr_dereg);

 #if defined(DHD_DEBUG)
 EXPORT_SYMBOL(bcmsdh_intr_pending);
 #endif

 EXPORT_SYMBOL(bcmsdh_devremove_reg);
 EXPORT_SYMBOL(bcmsdh_cfg_read);
 EXPORT_SYMBOL(bcmsdh_cfg_write);
 EXPORT_SYMBOL(bcmsdh_cis_read);
 EXPORT_SYMBOL(bcmsdh_reg_read);
 EXPORT_SYMBOL(bcmsdh_reg_write);
 EXPORT_SYMBOL(bcmsdh_regfail);
 EXPORT_SYMBOL(bcmsdh_send_buf);
 EXPORT_SYMBOL(bcmsdh_recv_buf);

 EXPORT_SYMBOL(bcmsdh_rwdata);
 EXPORT_SYMBOL(bcmsdh_abort);
 EXPORT_SYMBOL(bcmsdh_query_device);
 EXPORT_SYMBOL(bcmsdh_query_iofnum);
 EXPORT_SYMBOL(bcmsdh_iovar_op);
 EXPORT_SYMBOL(bcmsdh_register);
 EXPORT_SYMBOL(bcmsdh_unregister);
 EXPORT_SYMBOL(bcmsdh_chipmatch);
 EXPORT_SYMBOL(bcmsdh_reset);

 EXPORT_SYMBOL(bcmsdh_get_dstatus);
 EXPORT_SYMBOL(bcmsdh_cfg_read_word);
 EXPORT_SYMBOL(bcmsdh_cfg_write_word);
 EXPORT_SYMBOL(bcmsdh_cur_sbwad);
 EXPORT_SYMBOL(bcmsdh_chipinfo);

 #endif /* BCMSDH_MODULE */
	/*
	* SDIO access interface for drivers - linux specific (pci only)
	*
	* Copyright (C) 1999-2010, Broadcom Corporation
	*
	* Unless you and Broadcom execute a separate written software license
	* agreement governing use of this software, this software is licensed to you
	* under the terms of the GNU General Public License version 2 (the "GPL"),
	* available at http://www.broadcom.com/licenses/GPLv2.php, with the
	* following added to such license:
	*
	* As a special exception, the copyright holders of this software give you
	* permission to link this software with independent modules, and to copy and
	* distribute the resulting executable under terms of your choice, provided that
	* you also meet, for each linked independent module, the terms and conditions of
	* the license of that module. An independent module is a module which is not
	* derived from this software. The special exception does not apply to any
	* modifications of the software.
	*
	* Notwithstanding the above, under no circumstances may you combine this
	* software in any way with any other Broadcom software provided under a license
	* other than the GPL, without Broadcom's express prior written consent.
	*
	* $Id: bcmsdh_linux.c,v 1.42.10.10.2.14.4.2 2010/09/15 00:30:11 Exp $
	*/

	/**
	* @file bcmsdh_linux.c
	*/

	#define __UNDEF_NO_VERSION__

	#include <typedefs.h>
	#include <linuxver.h>

	#include <linux/pci.h>
	#include <linux/completion.h>

	#include <osl.h>
	#include <pcicfg.h>
	#include <bcmdefs.h>
	#include <bcmdevs.h>

	#if defined(OOB_INTR_ONLY)
	#include <linux/irq.h>
	extern void dhdsdio_isr(void * args);
	#include <bcmutils.h>
	#include <dngl_stats.h>
	#include <dhd.h>
	#endif /* defined(OOB_INTR_ONLY) */
	#if defined(CONFIG_MACH_SANDGATE2G) \|\| defined(CONFIG_MACH_LOGICPD_PXA270)
	#if !defined(BCMPLATFORM_BUS)
	#define BCMPLATFORM_BUS
	#endif /* !defined(BCMPLATFORM_BUS) */

	#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
	#include <linux/platform_device.h>
	#endif /* KERNEL_VERSION(2, 6, 19) */
	#endif /* CONFIG_MACH_SANDGATE2G \|\| CONFIG_MACH_LOGICPD_PXA270 */

	/**
	* SDIO Host Controller info
	*/
	typedef struct bcmsdh_hc bcmsdh_hc_t;

	struct bcmsdh_hc {
	bcmsdh_hc_t *next;
	#ifdef BCMPLATFORM_BUS
	struct device dev; / platform device handle */
	#else
	struct pci_dev dev; / pci device handle */
	#endif /* BCMPLATFORM_BUS */
	osl_t *osh;
	void regs; / SDIO Host Controller address */
	bcmsdh_info_t sdh; / SDIO Host Controller handle */
	void *ch;
	unsigned int oob_irq;
	unsigned long oob_flags; /* OOB Host specifiction as edge and etc */
	bool oob_irq_registered;
	#if defined(OOB_INTR_ONLY)
	spinlock_t irq_lock;
	#endif
	};
	static bcmsdh_hc_t *sdhcinfo = NULL;

	/* driver info, initialized when bcmsdh_register is called */
	static bcmsdh_driver_t drvinfo = {NULL, NULL};

	/* debugging macros */
	#define SDLX_MSG(x)

	/**
	* Checks to see if vendor and device IDs match a supported SDIO Host Controller.
	*/
	bool
	bcmsdh_chipmatch(uint16 vendor, uint16 device)
	{
	/* Add other vendors and devices as required */

	#ifdef BCMSDIOH_STD
	/* Check for Arasan host controller */
	if (vendor == VENDOR_SI_IMAGE) {
	return (TRUE);
	}
	/* Check for BRCM 27XX Standard host controller */
	if (device == BCM27XX_SDIOH_ID && vendor == VENDOR_BROADCOM) {
	return (TRUE);
	}
	/* Check for BRCM Standard host controller */
	if (device == SDIOH_FPGA_ID && vendor == VENDOR_BROADCOM) {
	return (TRUE);
	}
	/* Check for TI PCIxx21 Standard host controller */
	if (device == PCIXX21_SDIOH_ID && vendor == VENDOR_TI) {
	return (TRUE);
	}
	if (device == PCIXX21_SDIOH0_ID && vendor == VENDOR_TI) {
	return (TRUE);
	}
	/* Ricoh R5C822 Standard SDIO Host */
	if (device == R5C822_SDIOH_ID && vendor == VENDOR_RICOH) {
	return (TRUE);
	}
	/* JMicron Standard SDIO Host */
	if (device == JMICRON_SDIOH_ID && vendor == VENDOR_JMICRON) {
	return (TRUE);
	}

	#endif /* BCMSDIOH_STD */
	#ifdef BCMSDIOH_SPI
	/* This is the PciSpiHost. */
	if (device == SPIH_FPGA_ID && vendor == VENDOR_BROADCOM) {
	printf("Found PCI SPI Host Controller\n");
	return (TRUE);
	}

	#endif /* BCMSDIOH_SPI */

	return (FALSE);
	}

	#if defined(BCMPLATFORM_BUS)
	#if defined(BCMLXSDMMC)
	/* forward declarations */
	int bcmsdh_probe(struct device *dev);
	int bcmsdh_remove(struct device *dev);

	EXPORT_SYMBOL(bcmsdh_probe);
	EXPORT_SYMBOL(bcmsdh_remove);

	#else
	/* forward declarations */
	static int __devinit bcmsdh_probe(struct device *dev);
	static int __devexit bcmsdh_remove(struct device *dev);
	#endif /* BCMLXSDMMC */

	#ifndef BCMLXSDMMC
	static struct device_driver bcmsdh_driver = {
	.name = "pxa2xx-mci",
	.bus = &platform_bus_type,
	.probe = bcmsdh_probe,
	.remove = bcmsdh_remove,
	.suspend = NULL,
	.resume = NULL,
	};
	#endif /* BCMLXSDMMC */

	#ifndef BCMLXSDMMC
	static
	#endif /* BCMLXSDMMC */
	int bcmsdh_probe(struct device *dev)
	{
	osl_t *osh = NULL;
	bcmsdh_hc_t *sdhc = NULL;
	ulong regs = 0;
	bcmsdh_info_t *sdh = NULL;
	#if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
	struct platform_device *pdev;
	struct resource *r;
	#endif /* BCMLXSDMMC */
	int irq = 0;
	uint32 vendevid;
	unsigned long irq_flags = 0;

	#if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
	pdev = to_platform_device(dev);
	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	irq = platform_get_irq(pdev, 0);
	if (!r \|\| irq == NO_IRQ)
	return -ENXIO;
	#endif /* BCMLXSDMMC */

	#if defined(OOB_INTR_ONLY)
	#ifdef HW_OOB
	irq_flags = \
	IORESOURCE_IRQ \| IORESOURCE_IRQ_HIGHLEVEL \| IORESOURCE_IRQ_SHAREABLE;
	#else
	irq_flags = IRQF_TRIGGER_FALLING;
	#endif /* HW_OOB */
	irq = dhd_customer_oob_irq_map(&irq_flags);
	if (irq < 0) {
	SDLX_MSG(("%s: Host irq is not defined\n", __FUNCTION__));
	return 1;
	}
	#endif /* defined(OOB_INTR_ONLY) */
	/* allocate SDIO Host Controller state info */
	if (!(osh = osl_attach(dev, PCI_BUS, FALSE))) {
	SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
	goto err;
	}
	if (!(sdhc = MALLOC(osh, sizeof(bcmsdh_hc_t)))) {
	SDLX_MSG(("%s: out of memory, allocated %d bytes\n",
	__FUNCTION__,
	MALLOCED(osh)));
	goto err;
	}
	bzero(sdhc, sizeof(bcmsdh_hc_t));
	sdhc->osh = osh;

	sdhc->dev = (void *)dev;

	#ifdef BCMLXSDMMC
	if (!(sdh = bcmsdh_attach(osh, (void *)0,
	(void **)&regs, irq))) {
	SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
	goto err;
	}
	#else
	if (!(sdh = bcmsdh_attach(osh, (void *)r->start,
	(void **)&regs, irq))) {
	SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
	goto err;
	}
	#endif /* BCMLXSDMMC */
	sdhc->sdh = sdh;
	sdhc->oob_irq = irq;
	sdhc->oob_flags = irq_flags;
	sdhc->oob_irq_registered = FALSE; /* to make sure.. */
	#if defined(OOB_INTR_ONLY)
	spin_lock_init(&sdhc->irq_lock);
	#endif

	/* chain SDIO Host Controller info together */
	sdhc->next = sdhcinfo;
	sdhcinfo = sdhc;
	/* Read the vendor/device ID from the CIS */
	vendevid = bcmsdh_query_device(sdh);

	/* try to attach to the target device */
	if (!(sdhc->ch = drvinfo.attach((vendevid >> 16),
	(vendevid & 0xFFFF), 0, 0, 0, 0,
	(void *)regs, NULL, sdh))) {
	SDLX_MSG(("%s: device attach failed\n", __FUNCTION__));
	goto err;
	}

	return 0;

	/* error handling */
	err:
	if (sdhc) {
	if (sdhc->sdh)
	bcmsdh_detach(sdhc->osh, sdhc->sdh);
	MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
	}
	if (osh)
	osl_detach(osh);
	return -ENODEV;
	}

	#ifndef BCMLXSDMMC
	static
	#endif /* BCMLXSDMMC */
	int bcmsdh_remove(struct device *dev)
	{
	bcmsdh_hc_t sdhc, prev;
	osl_t *osh;

	sdhc = sdhcinfo;
	drvinfo.detach(sdhc->ch);
	bcmsdh_detach(sdhc->osh, sdhc->sdh);
	/* find the SDIO Host Controller state for this pdev and take it out from the list */
	for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
	if (sdhc->dev == (void *)dev) {
	if (prev)
	prev->next = sdhc->next;
	else
	sdhcinfo = NULL;
	break;
	}
	prev = sdhc;
	}
	if (!sdhc) {
	SDLX_MSG(("%s: failed\n", __FUNCTION__));
	return 0;
	}


	/* release SDIO Host Controller info */
	osh = sdhc->osh;
	MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
	osl_detach(osh);

	#if !defined(BCMLXSDMMC)
	dev_set_drvdata(dev, NULL);
	#endif /* !defined(BCMLXSDMMC) */

	return 0;
	}

	#else /* BCMPLATFORM_BUS */

	#if !defined(BCMLXSDMMC)
	/* forward declarations for PCI probe and remove functions. */
	static int __devinit bcmsdh_pci_probe(struct pci_dev pdev, const struct pci_device_id ent);
	static void __devexit bcmsdh_pci_remove(struct pci_dev *pdev);

	/**
	* pci id table
	*/
	static struct pci_device_id bcmsdh_pci_devid[] __devinitdata = {
	{ vendor: PCI_ANY_ID,
	device: PCI_ANY_ID,
	subvendor: PCI_ANY_ID,
	subdevice: PCI_ANY_ID,
	class: 0,
	class_mask: 0,
	driver_data: 0,
	},
	{ 0, }
	};
	MODULE_DEVICE_TABLE(pci, bcmsdh_pci_devid);

	/**
	* SDIO Host Controller pci driver info
	*/
	static struct pci_driver bcmsdh_pci_driver = {
	node: {},
	name: "bcmsdh",
	id_table: bcmsdh_pci_devid,
	probe: bcmsdh_pci_probe,
	remove: bcmsdh_pci_remove,
	#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
	save_state: NULL,
	#endif
	suspend: NULL,
	resume: NULL,
	};


	extern uint sd_pci_slot; /* Force detection to a particular PCI */
	/* slot only . Allows for having multiple */
	/* WL devices at once in a PC */
	/* Only one instance of dhd will be */
	/* usable at a time */
	/* Upper word is bus number, */
	/* lower word is slot number */
	/* Default value of 0xFFFFffff turns this */
	/* off */
	module_param(sd_pci_slot, uint, 0);


	/**
	* Detect supported SDIO Host Controller and attach if found.
	*
	* Determine if the device described by pdev is a supported SDIO Host
	* Controller. If so, attach to it and attach to the target device.
	*/
	static int __devinit
	bcmsdh_pci_probe(struct pci_dev pdev, const struct pci_device_id ent)
	{
	osl_t *osh = NULL;
	bcmsdh_hc_t *sdhc = NULL;
	ulong regs;
	bcmsdh_info_t *sdh = NULL;
	int rc;

	if (sd_pci_slot != 0xFFFFffff) {
	if (pdev->bus->number != (sd_pci_slot>>16) \|\|
	PCI_SLOT(pdev->devfn) != (sd_pci_slot&0xffff)) {
	SDLX_MSG(("%s: %s: bus %X, slot %X, vend %X, dev %X\n",
	__FUNCTION__,
	bcmsdh_chipmatch(pdev->vendor, pdev->device) ?
	"Found compatible SDIOHC" :
	"Probing unknown device",
	pdev->bus->number, PCI_SLOT(pdev->devfn),
	pdev->vendor, pdev->device));
	return -ENODEV;
	}
	SDLX_MSG(("%s: %s: bus %X, slot %X, vendor %X, device %X (good PCI location)\n",
	__FUNCTION__,
	bcmsdh_chipmatch(pdev->vendor, pdev->device) ?
	"Using compatible SDIOHC" :
	"WARNING, forced use of unkown device",
	pdev->bus->number, PCI_SLOT(pdev->devfn),
	pdev->vendor, pdev->device));
	}

	if ((pdev->vendor == VENDOR_TI) && ((pdev->device == PCIXX21_FLASHMEDIA_ID) \|\|
	(pdev->device == PCIXX21_FLASHMEDIA0_ID))) {
	uint32 config_reg;

	SDLX_MSG(("%s: Disabling TI FlashMedia Controller.\n", __FUNCTION__));
	if (!(osh = osl_attach(pdev, PCI_BUS, FALSE))) {
	SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
	goto err;
	}

	config_reg = OSL_PCI_READ_CONFIG(osh, 0x4c, 4);

	/*
	* Set MMC_SD_DIS bit in FlashMedia Controller.
	* Disbling the SD/MMC Controller in the FlashMedia Controller
	* allows the Standard SD Host Controller to take over control
	* of the SD Slot.
	*/
	config_reg \|= 0x02;
	OSL_PCI_WRITE_CONFIG(osh, 0x4c, 4, config_reg);
	osl_detach(osh);
	}
	/* match this pci device with what we support */
	/* we can't solely rely on this to believe it is our SDIO Host Controller! */
	if (!bcmsdh_chipmatch(pdev->vendor, pdev->device)) {
	return -ENODEV;
	}

	/* this is a pci device we might support */
	SDLX_MSG(("%s: Found possible SDIO Host Controller: bus %d slot %d func %d irq %d\n",
	__FUNCTION__,
	pdev->bus->number, PCI_SLOT(pdev->devfn),
	PCI_FUNC(pdev->devfn), pdev->irq));

	/* use bcmsdh_query_device() to get the vendor ID of the target device so
	* it will eventually appear in the Broadcom string on the console
	*/

	/* allocate SDIO Host Controller state info */
	if (!(osh = osl_attach(pdev, PCI_BUS, FALSE))) {
	SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
	goto err;
	}
	if (!(sdhc = MALLOC(osh, sizeof(bcmsdh_hc_t)))) {
	SDLX_MSG(("%s: out of memory, allocated %d bytes\n",
	__FUNCTION__,
	MALLOCED(osh)));
	goto err;
	}
	bzero(sdhc, sizeof(bcmsdh_hc_t));
	sdhc->osh = osh;

	sdhc->dev = pdev;

	/* map to address where host can access */
	pci_set_master(pdev);
	rc = pci_enable_device(pdev);
	if (rc) {
	SDLX_MSG(("%s: Cannot enable PCI device\n", __FUNCTION__));
	goto err;
	}
	if (!(sdh = bcmsdh_attach(osh, (void *)(uintptr)pci_resource_start(pdev, 0),
	(void **)&regs, pdev->irq))) {
	SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
	goto err;
	}

	sdhc->sdh = sdh;

	/* try to attach to the target device */
	if (!(sdhc->ch = drvinfo.attach(VENDOR_BROADCOM, /* pdev->vendor, */
	bcmsdh_query_device(sdh) & 0xFFFF, 0, 0, 0, 0,
	(void *)regs, NULL, sdh))) {
	SDLX_MSG(("%s: device attach failed\n", __FUNCTION__));
	goto err;
	}

	/* chain SDIO Host Controller info together */
	sdhc->next = sdhcinfo;
	sdhcinfo = sdhc;

	return 0;

	/* error handling */
	err:
	if (sdhc->sdh)
	bcmsdh_detach(sdhc->osh, sdhc->sdh);
	if (sdhc)
	MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
	if (osh)
	osl_detach(osh);
	return -ENODEV;
	}


	/**
	* Detach from target devices and SDIO Host Controller
	*/
	static void __devexit
	bcmsdh_pci_remove(struct pci_dev *pdev)
	{
	bcmsdh_hc_t sdhc, prev;
	osl_t *osh;

	/* find the SDIO Host Controller state for this pdev and take it out from the list */
	for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
	if (sdhc->dev == pdev) {
	if (prev)
	prev->next = sdhc->next;
	else
	sdhcinfo = NULL;
	break;
	}
	prev = sdhc;
	}
	if (!sdhc)
	return;

	drvinfo.detach(sdhc->ch);

	bcmsdh_detach(sdhc->osh, sdhc->sdh);

	/* release SDIO Host Controller info */
	osh = sdhc->osh;
	MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
	osl_detach(osh);
	}
	#endif /* BCMLXSDMMC */
	#endif /* BCMPLATFORM_BUS */

	extern int sdio_function_init(void);

	int
	bcmsdh_register(bcmsdh_driver_t *driver)
	{
	int error = 0;

	drvinfo = *driver;

	#if defined(BCMPLATFORM_BUS)
	#if defined(BCMLXSDMMC)
	SDLX_MSG(("Linux Kernel SDIO/MMC Driver\n"));
	error = sdio_function_init();
	#else
	SDLX_MSG(("Intel PXA270 SDIO Driver\n"));
	error = driver_register(&bcmsdh_driver);
	#endif /* defined(BCMLXSDMMC) */
	return error;
	#endif /* defined(BCMPLATFORM_BUS) */

	#if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
	#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
	if (!(error = pci_module_init(&bcmsdh_pci_driver)))
	return 0;
	#else
	if (!(error = pci_register_driver(&bcmsdh_pci_driver)))
	return 0;
	#endif

	SDLX_MSG(("%s: pci_module_init failed 0x%x\n", __FUNCTION__, error));
	#endif /* BCMPLATFORM_BUS */

	return error;
	}

	extern void sdio_function_cleanup(void);

	void
	bcmsdh_unregister(void)
	{
	#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
	if (bcmsdh_pci_driver.node.next)
	#endif

	#if defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
	driver_unregister(&bcmsdh_driver);
	#endif
	#if defined(BCMLXSDMMC)
	sdio_function_cleanup();
	#endif /* BCMLXSDMMC */
	#if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
	pci_unregister_driver(&bcmsdh_pci_driver);
	#endif /* BCMPLATFORM_BUS */
	}



	#if defined(OOB_INTR_ONLY)
	void bcmsdh_oob_intr_set(bool enable)
	{
	static bool curstate = 1;
	unsigned long flags;

	spin_lock_irqsave(&sdhcinfo->irq_lock, flags);
	if (curstate != enable) {
	if (enable)
	enable_irq(sdhcinfo->oob_irq);
	else
	disable_irq_nosync(sdhcinfo->oob_irq);
	curstate = enable;
	}
	spin_unlock_irqrestore(&sdhcinfo->irq_lock, flags);
	}

	static irqreturn_t wlan_oob_irq(int irq, void *dev_id)
	{
	dhd_pub_t *dhdp;

	dhdp = (dhd_pub_t *)dev_get_drvdata(sdhcinfo->dev);

	bcmsdh_oob_intr_set(0);

	if (dhdp == NULL) {
	SDLX_MSG(("Out of band GPIO interrupt fired way too early\n"));
	return IRQ_HANDLED;
	}

	dhdsdio_isr((void *)dhdp->bus);

	return IRQ_HANDLED;
	}

	int bcmsdh_register_oob_intr(void * dhdp)
	{
	int error = 0;

	SDLX_MSG(("%s Enter\n", __FUNCTION__));

	dev_set_drvdata(sdhcinfo->dev, dhdp);

	if (!sdhcinfo->oob_irq_registered) {
	SDLX_MSG(("%s IRQ=%d Type=%X \n", __FUNCTION__, \
	(int)sdhcinfo->oob_irq, (int)sdhcinfo->oob_flags));
	/* Refer to customer Host IRQ docs about proper irqflags definition */
	error = request_irq(sdhcinfo->oob_irq, wlan_oob_irq, sdhcinfo->oob_flags,
	"bcmsdh_sdmmc", NULL);
	if (error)
	return -ENODEV;

	set_irq_wake(sdhcinfo->oob_irq, 1);
	sdhcinfo->oob_irq_registered = TRUE;
	}

	return 0;
	}

	void bcmsdh_unregister_oob_intr(void)
	{
	SDLX_MSG(("%s: Enter\n", __FUNCTION__));

	set_irq_wake(sdhcinfo->oob_irq, 0);
	disable_irq(sdhcinfo->oob_irq); /* just in case.. */
	free_irq(sdhcinfo->oob_irq, NULL);
	sdhcinfo->oob_irq_registered = FALSE;
	}
	#endif /* defined(OOB_INTR_ONLY) */
	/* Module parameters specific to each host-controller driver */

	extern uint sd_msglevel; /* Debug message level */
	module_param(sd_msglevel, uint, 0);

	extern uint sd_power; /* 0 = SD Power OFF, 1 = SD Power ON. */
	module_param(sd_power, uint, 0);

	extern uint sd_clock; /* SD Clock Control, 0 = SD Clock OFF, 1 = SD Clock ON */
	module_param(sd_clock, uint, 0);

	extern uint sd_divisor; /* Divisor (-1 means external clock) */
	module_param(sd_divisor, uint, 0);

	extern uint sd_sdmode; /* Default is SD4, 0=SPI, 1=SD1, 2=SD4 */
	module_param(sd_sdmode, uint, 0);

	extern uint sd_hiok; /* Ok to use hi-speed mode */
	module_param(sd_hiok, uint, 0);

	extern uint sd_f2_blocksize;
	module_param(sd_f2_blocksize, int, 0);


	#ifdef BCMSDH_MODULE
	EXPORT_SYMBOL(bcmsdh_attach);
	EXPORT_SYMBOL(bcmsdh_detach);
	EXPORT_SYMBOL(bcmsdh_intr_query);
	EXPORT_SYMBOL(bcmsdh_intr_enable);
	EXPORT_SYMBOL(bcmsdh_intr_disable);
	EXPORT_SYMBOL(bcmsdh_intr_reg);
	EXPORT_SYMBOL(bcmsdh_intr_dereg);

	#if defined(DHD_DEBUG)
	EXPORT_SYMBOL(bcmsdh_intr_pending);
	#endif

	EXPORT_SYMBOL(bcmsdh_devremove_reg);
	EXPORT_SYMBOL(bcmsdh_cfg_read);
	EXPORT_SYMBOL(bcmsdh_cfg_write);
	EXPORT_SYMBOL(bcmsdh_cis_read);
	EXPORT_SYMBOL(bcmsdh_reg_read);
	EXPORT_SYMBOL(bcmsdh_reg_write);
	EXPORT_SYMBOL(bcmsdh_regfail);
	EXPORT_SYMBOL(bcmsdh_send_buf);
	EXPORT_SYMBOL(bcmsdh_recv_buf);

	EXPORT_SYMBOL(bcmsdh_rwdata);
	EXPORT_SYMBOL(bcmsdh_abort);
	EXPORT_SYMBOL(bcmsdh_query_device);
	EXPORT_SYMBOL(bcmsdh_query_iofnum);
	EXPORT_SYMBOL(bcmsdh_iovar_op);
	EXPORT_SYMBOL(bcmsdh_register);
	EXPORT_SYMBOL(bcmsdh_unregister);
	EXPORT_SYMBOL(bcmsdh_chipmatch);
	EXPORT_SYMBOL(bcmsdh_reset);

	EXPORT_SYMBOL(bcmsdh_get_dstatus);
	EXPORT_SYMBOL(bcmsdh_cfg_read_word);
	EXPORT_SYMBOL(bcmsdh_cfg_write_word);
	EXPORT_SYMBOL(bcmsdh_cur_sbwad);
	EXPORT_SYMBOL(bcmsdh_chipinfo);

	#endif /* BCMSDH_MODULE */