| /* |
| * CDC network driver ioctl/indication encoding |
| * Broadcom 802.11abg Networking Device Driver |
| * |
| * Definitions subject to change without notice. |
| * |
| * Copyright (C) 1999-2010, Broadcom Corporation |
| * |
| * Unless you and Broadcom execute a separate written software license |
| * agreement governing use of this software, this software is licensed to you |
| * under the terms of the GNU General Public License version 2 (the "GPL"), |
| * available at http://www.broadcom.com/licenses/GPLv2.php, with the |
| * following added to such license: |
| * |
| * As a special exception, the copyright holders of this software give you |
| * permission to link this software with independent modules, and to copy and |
| * distribute the resulting executable under terms of your choice, provided that |
| * you also meet, for each linked independent module, the terms and conditions of |
| * the license of that module. An independent module is a module which is not |
| * derived from this software. The special exception does not apply to any |
| * modifications of the software. |
| * |
| * Notwithstanding the above, under no circumstances may you combine this |
| * software in any way with any other Broadcom software provided under a license |
| * other than the GPL, without Broadcom's express prior written consent. |
| * |
| * $Id: bcmcdc.h,v 13.14.16.3.16.4 2009/04/12 16:58:45 Exp $ |
| */ |
| #include <proto/ethernet.h> |
| |
| typedef struct cdc_ioctl { |
| uint32 cmd; /* ioctl command value */ |
| uint32 len; /* lower 16: output buflen; upper 16: input buflen (excludes header) */ |
| uint32 flags; /* flag defns given below */ |
| uint32 status; /* status code returned from the device */ |
| } cdc_ioctl_t; |
| |
| /* Max valid buffer size that can be sent to the dongle */ |
| #define CDC_MAX_MSG_SIZE ETHER_MAX_LEN |
| |
| /* len field is divided into input and output buffer lengths */ |
| #define CDCL_IOC_OUTLEN_MASK 0x0000FFFF /* maximum or expected response length, */ |
| /* excluding IOCTL header */ |
| #define CDCL_IOC_OUTLEN_SHIFT 0 |
| #define CDCL_IOC_INLEN_MASK 0xFFFF0000 /* input buffer length, excluding IOCTL header */ |
| #define CDCL_IOC_INLEN_SHIFT 16 |
| |
| /* CDC flag definitions */ |
| #define CDCF_IOC_ERROR 0x01 /* 0=success, 1=ioctl cmd failed */ |
| #define CDCF_IOC_SET 0x02 /* 0=get, 1=set cmd */ |
| #define CDCF_IOC_IF_MASK 0xF000 /* I/F index */ |
| #define CDCF_IOC_IF_SHIFT 12 |
| #define CDCF_IOC_ID_MASK 0xFFFF0000 /* used to uniquely id an ioctl req/resp pairing */ |
| #define CDCF_IOC_ID_SHIFT 16 /* # of bits of shift for ID Mask */ |
| |
| #define CDC_IOC_IF_IDX(flags) (((flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT) |
| #define CDC_IOC_ID(flags) (((flags) & CDCF_IOC_ID_MASK) >> CDCF_IOC_ID_SHIFT) |
| |
| #define CDC_GET_IF_IDX(hdr) \ |
| ((int)((((hdr)->flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT)) |
| #define CDC_SET_IF_IDX(hdr, idx) \ |
| ((hdr)->flags = (((hdr)->flags & ~CDCF_IOC_IF_MASK) | ((idx) << CDCF_IOC_IF_SHIFT))) |
| |
| /* |
| * BDC header |
| * |
| * The BDC header is used on data packets to convey priority across USB. |
| */ |
| |
| #define BDC_HEADER_LEN 4 |
| |
| #define BDC_PROTO_VER 1 /* Protocol version */ |
| |
| #define BDC_FLAG_VER_MASK 0xf0 /* Protocol version mask */ |
| #define BDC_FLAG_VER_SHIFT 4 /* Protocol version shift */ |
| |
| #define BDC_FLAG__UNUSED 0x03 /* Unassigned */ |
| #define BDC_FLAG_SUM_GOOD 0x04 /* Dongle has verified good RX checksums */ |
| #define BDC_FLAG_SUM_NEEDED 0x08 /* Dongle needs to do TX checksums */ |
| |
| #define BDC_PRIORITY_MASK 0x7 |
| |
| #define BDC_FLAG2_FC_FLAG 0x10 /* flag to indicate if pkt contains */ |
| /* FLOW CONTROL info only */ |
| #define BDC_PRIORITY_FC_SHIFT 4 /* flow control info shift */ |
| |
| #define BDC_FLAG2_IF_MASK 0x0f /* APSTA: interface on which the packet was received */ |
| #define BDC_FLAG2_IF_SHIFT 0 |
| |
| #define BDC_GET_IF_IDX(hdr) \ |
| ((int)((((hdr)->flags2) & BDC_FLAG2_IF_MASK) >> BDC_FLAG2_IF_SHIFT)) |
| #define BDC_SET_IF_IDX(hdr, idx) \ |
| ((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_IF_MASK) | ((idx) << BDC_FLAG2_IF_SHIFT))) |
| |
| struct bdc_header { |
| uint8 flags; /* Flags */ |
| uint8 priority; /* 802.1d Priority 0:2 bits, 4:7 flow control info for usb */ |
| uint8 flags2; |
| uint8 rssi; |
| }; |