| /* |
| $License: |
| Copyright (C) 2011-2012 InvenSense Corporation, All Rights Reserved. |
| See included License.txt for License information. |
| $ |
| */ |
| #include "mltypes.h" |
| |
| #ifndef INV_DATA_BUILDER_H__ |
| #define INV_DATA_BUILDER_H__ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| // Uncomment this flag to enable playback debug and record or playback scenarios |
| //#define INV_PLAYBACK_DBG |
| |
| /** This is a new sample of accel data */ |
| #define INV_ACCEL_NEW 1 |
| /** This is a new sample of gyro data */ |
| #define INV_GYRO_NEW 2 |
| /** This is a new sample of compass data */ |
| #define INV_MAG_NEW 4 |
| /** This is a new sample of temperature data */ |
| #define INV_TEMP_NEW 8 |
| /** This is a new sample of quaternion data */ |
| #define INV_QUAT_NEW 16 |
| |
| /** Set if the data is contiguous. Typically not set if a sample was skipped */ |
| #define INV_CONTIGUOUS 16 |
| /** Set if the calibrated data has been solved for */ |
| #define INV_CALIBRATED 32 |
| /* INV_NEW_DATA set for a new set of data, cleared if not available. */ |
| #define INV_NEW_DATA 64 |
| /* Set if raw data exists */ |
| #define INV_RAW_DATA 128 |
| /* Set if the sensor is on */ |
| #define INV_SENSOR_ON 256 |
| /* Set if quaternion has bias correction applied */ |
| #define INV_BIAS_APPLIED 512 |
| |
| #define INV_PRIORITY_MOTION_NO_MOTION 100 |
| #define INV_PRIORITY_GYRO_TC 150 |
| #define INV_PRIORITY_QUATERNION_GYRO_ACCEL 200 |
| #define INV_PRIORITY_QUATERNION_NO_GYRO 250 |
| #define INV_PRIORITY_MAGNETIC_DISTURBANCE 300 |
| #define INV_PRIORITY_HEADING_FROM_GYRO 350 |
| #define INV_PRIORITY_COMPASS_BIAS_W_GYRO 375 |
| #define INV_PRIORITY_COMPASS_VECTOR_CAL 400 |
| #define INV_PRIORITY_COMPASS_ADV_BIAS 500 |
| #define INV_PRIORITY_9_AXIS_FUSION 600 |
| #define INV_PRIORITY_QUATERNION_ADJUST_9_AXIS 700 |
| #define INV_PRIORITY_QUATERNION_ACCURACY 750 |
| #define INV_PRIORITY_RESULTS_HOLDER 800 |
| #define INV_PRIORITY_INUSE_AUTO_CALIBRATION 850 |
| #define INV_PRIORITY_HAL_OUTPUTS 900 |
| #define INV_PRIORITY_GLYPH 950 |
| #define INV_PRIORITY_SHAKE 975 |
| #define INV_PRIORITY_SM 1000 |
| |
| struct inv_single_sensor_t { |
| /** Orientation Descriptor. Describes how to go from the mounting frame to the body frame when |
| * the rotation matrix could be thought of only having elements of 0,1,-1. |
| * 2 bits are used to describe the column of the 1 or -1 and the 3rd bit is used for the sign. |
| * Bit 8 is sign of +/- 1 in third row. Bit 6-7 is column of +/-1 in third row. |
| * Bit 5 is sign of +/- 1 in second row. Bit 3-4 is column of +/-1 in second row. |
| * Bit 2 is sign of +/- 1 in first row. Bit 0-1 is column of +/-1 in first row. |
| */ |
| int orientation; |
| /** The raw data in raw data units in the mounting frame */ |
| short raw[3]; |
| /** Raw data in body frame */ |
| long raw_scaled[3]; |
| /** Calibrated data */ |
| long calibrated[3]; |
| long sensitivity; |
| /** Sample rate in microseconds */ |
| long sample_rate_us; |
| long sample_rate_ms; |
| /** INV_CONTIGUOUS is set for contiguous data. Will not be set if there was a sample |
| * skipped due to power savings turning off this sensor. |
| * INV_NEW_DATA set for a new set of data, cleared if not available. |
| * INV_CALIBRATED_SET if calibrated data has been solved for */ |
| int status; |
| /** 0 to 3 for how well sensor data and biases are known. 3 is most accurate. */ |
| int accuracy; |
| inv_time_t timestamp; |
| inv_time_t timestamp_prev; |
| /** Bandwidth in Hz */ |
| int bandwidth; |
| }; |
| struct inv_quat_sensor_t { |
| long raw[4]; |
| /** INV_CONTIGUOUS is set for contiguous data. Will not be set if there was a sample |
| * skipped due to power savings turning off this sensor. |
| * INV_NEW_DATA set for a new set of data, cleared if not available. |
| * INV_CALIBRATED_SET if calibrated data has been solved for */ |
| int status; |
| inv_time_t timestamp; |
| long sample_rate_us; |
| long sample_rate_ms; |
| }; |
| |
| struct inv_sensor_cal_t { |
| struct inv_single_sensor_t gyro; |
| struct inv_single_sensor_t accel; |
| struct inv_single_sensor_t compass; |
| struct inv_single_sensor_t temp; |
| struct inv_quat_sensor_t quat; |
| /** Combinations of INV_GYRO_NEW, INV_ACCEL_NEW, INV_MAG_NEW to indicate |
| * which data is a new sample as these data points may have different sample rates. |
| */ |
| int status; |
| }; |
| |
| // Useful for debug record and playback |
| typedef enum { |
| RD_NO_DEBUG, |
| RD_RECORD, |
| RD_PLAYBACK |
| } rd_dbg_mode; |
| |
| typedef enum { |
| PLAYBACK_DBG_TYPE_GYRO, |
| PLAYBACK_DBG_TYPE_ACCEL, |
| PLAYBACK_DBG_TYPE_COMPASS, |
| PLAYBACK_DBG_TYPE_TEMPERATURE, |
| PLAYBACK_DBG_TYPE_EXECUTE, |
| PLAYBACK_DBG_TYPE_A_ORIENT, |
| PLAYBACK_DBG_TYPE_G_ORIENT, |
| PLAYBACK_DBG_TYPE_C_ORIENT, |
| PLAYBACK_DBG_TYPE_A_SAMPLE_RATE, |
| PLAYBACK_DBG_TYPE_C_SAMPLE_RATE, |
| PLAYBACK_DBG_TYPE_G_SAMPLE_RATE, |
| PLAYBACK_DBG_TYPE_GYRO_OFF, |
| PLAYBACK_DBG_TYPE_ACCEL_OFF, |
| PLAYBACK_DBG_TYPE_COMPASS_OFF, |
| PLAYBACK_DBG_TYPE_Q_SAMPLE_RATE, |
| PLAYBACK_DBG_TYPE_QUAT |
| |
| } inv_rd_dbg_states; |
| |
| /** Maximum number of data callbacks that are supported. Safe to increase if needed.*/ |
| #define INV_MAX_DATA_CB 20 |
| |
| #ifdef INV_PLAYBACK_DBG |
| #include <stdio.h> |
| void inv_turn_on_data_logging(FILE *file); |
| void inv_turn_off_data_logging(); |
| #endif |
| |
| void inv_set_gyro_orientation_and_scale(int orientation, long sensitivity); |
| void inv_set_accel_orientation_and_scale(int orientation, |
| long sensitivity); |
| void inv_set_compass_orientation_and_scale(int orientation, |
| long sensitivity); |
| void inv_set_gyro_sample_rate(long sample_rate_us); |
| void inv_set_compass_sample_rate(long sample_rate_us); |
| void inv_set_quat_sample_rate(long sample_rate_us); |
| void inv_set_accel_sample_rate(long sample_rate_us); |
| void inv_set_gyro_bandwidth(int bandwidth_hz); |
| void inv_set_accel_bandwidth(int bandwidth_hz); |
| void inv_set_compass_bandwidth(int bandwidth_hz); |
| |
| void inv_get_gyro_sample_rate_ms(long *sample_rate_ms); |
| void inv_get_accel_sample_rate_ms(long *sample_rate_ms); |
| void inv_get_compass_sample_rate_ms(long *sample_rate_ms); |
| |
| inv_error_t inv_register_data_cb(inv_error_t (*func) |
| (struct inv_sensor_cal_t * data), int priority, |
| int sensor_type); |
| inv_error_t inv_unregister_data_cb(inv_error_t (*func) |
| (struct inv_sensor_cal_t * data)); |
| |
| inv_error_t inv_build_gyro(const short *gyro, inv_time_t timestamp); |
| inv_error_t inv_build_compass(const long *compass, int status, |
| inv_time_t timestamp); |
| inv_error_t inv_build_accel(const long *accel, int status, |
| inv_time_t timestamp); |
| inv_error_t inv_build_temp(const long temp, inv_time_t timestamp); |
| inv_error_t inv_build_quat(const long *quat, int status, inv_time_t timestamp); |
| inv_error_t inv_execute_on_data(void); |
| |
| void inv_get_compass_bias(long *bias); |
| |
| void inv_set_compass_bias(const long *bias, int accuracy); |
| void inv_set_compass_disturbance(int dist); |
| void inv_set_gyro_bias(const long *bias, int accuracy); |
| void inv_set_accel_bias(const long *bias, int accuracy); |
| void inv_set_accel_accuracy(int accuracy); |
| void inv_set_accel_bias_mask(const long *bias, int accuracy, int mask); |
| |
| void inv_get_gyro_bias(long *bias, long *temp); |
| void inv_get_accel_bias(long *bias, long *temp); |
| |
| void inv_gyro_was_turned_off(void); |
| void inv_accel_was_turned_off(void); |
| void inv_compass_was_turned_off(void); |
| void inv_quaternion_sensor_was_turned_off(void); |
| inv_error_t inv_init_data_builder(void); |
| long inv_get_gyro_sensitivity(void); |
| long inv_get_accel_sensitivity(void); |
| long inv_get_compass_sensitivity(void); |
| |
| void inv_get_accel_set(long *data, int8_t *accuracy, inv_time_t * timestamp); |
| void inv_get_gyro_set(long *data, int8_t *accuracy, inv_time_t * timestamp); |
| void inv_get_gyro_set_raw(long *data, int8_t *accuracy, inv_time_t * timestamp); |
| void inv_get_compass_set(long *data, int8_t *accuracy, inv_time_t * timestamp); |
| |
| void inv_get_gyro(long *gyro); |
| |
| int inv_get_gyro_accuracy(void); |
| int inv_get_accel_accuracy(void); |
| int inv_get_mag_accuracy(void); |
| |
| int inv_get_compass_on(void); |
| int inv_get_gyro_on(void); |
| int inv_get_accel_on(void); |
| |
| inv_time_t inv_get_last_timestamp(void); |
| int inv_get_compass_disturbance(void); |
| |
| //New DMP Cal Functions |
| inv_error_t inv_get_gyro_orient(int *orient); |
| inv_error_t inv_get_accel_orient(int *orient); |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* INV_DATA_BUILDER_H__ */ |