blob: 798cb9f14d1b3a7a828004a002a65ed1b49659e3 [file] [log] [blame]
/*
$License:
Copyright 2011 InvenSense, Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
$
*/
/*******************************************************************************
*
* $Id: compass.c 5641 2011-06-14 02:10:02Z mcaramello $
*
*******************************************************************************/
/**
* @defgroup COMPASSDL
* @brief Motion Library - Compass Driver Layer.
* Provides the interface to setup and handle an compass
* connected to either the primary or the seconday I2C interface
* of the gyroscope.
*
* @{
* @file compass.c
* @brief Compass setup and handling methods.
*/
/* ------------------ */
/* - Include Files. - */
/* ------------------ */
#include <string.h>
#include <stdlib.h>
#include "compass.h"
#include "ml.h"
#include "mlinclude.h"
#include "dmpKey.h"
#include "mlFIFO.h"
#include "mldl.h"
#include "mldl_cfg.h"
#include "mlMathFunc.h"
#include "mlsl.h"
#include "mlos.h"
#include "log.h"
#undef MPL_LOG_TAG
#define MPL_LOG_TAG "MPL-compass"
#define COMPASS_DEBUG 0
/* --------------------- */
/* - Global Variables. - */
/* --------------------- */
/* --------------------- */
/* - Static Variables. - */
/* --------------------- */
/* --------------- */
/* - Prototypes. - */
/* --------------- */
/* -------------- */
/* - Externs. - */
/* -------------- */
/* -------------- */
/* - Functions. - */
/* -------------- */
static float square(float data)
{
return data * data;
}
static void adaptive_filter_init(struct yas_adaptive_filter *adap_filter, int len, float noise)
{
int i;
adap_filter->num = 0;
adap_filter->index = 0;
adap_filter->noise = noise;
adap_filter->len = len;
for (i = 0; i < adap_filter->len; ++i) {
adap_filter->sequence[i] = 0;
}
}
static int cmpfloat(const void *p1, const void *p2)
{
return *(float*)p1 - *(float*)p2;
}
static float adaptive_filter_filter(struct yas_adaptive_filter *adap_filter, float in)
{
float avg, sum, median, sorted[YAS_DEFAULT_FILTER_LEN];
int i;
if (adap_filter->len <= 1) {
return in;
}
if (adap_filter->num < adap_filter->len) {
adap_filter->sequence[adap_filter->index++] = in;
adap_filter->num++;
return in;
}
if (adap_filter->len <= adap_filter->index) {
adap_filter->index = 0;
}
adap_filter->sequence[adap_filter->index++] = in;
avg = 0;
for (i = 0; i < adap_filter->len; i++) {
avg += adap_filter->sequence[i];
}
avg /= adap_filter->len;
memcpy(sorted, adap_filter->sequence, adap_filter->len * sizeof(float));
qsort(&sorted, adap_filter->len, sizeof(float), cmpfloat);
median = sorted[adap_filter->len/2];
sum = 0;
for (i = 0; i < adap_filter->len; i++) {
sum += square(avg - adap_filter->sequence[i]);
}
sum /= adap_filter->len;
if (sum <= adap_filter->noise) {
return median;
}
return ((in - avg) * (sum - adap_filter->noise) / sum + avg);
}
static void thresh_filter_init(struct yas_thresh_filter *thresh_filter, float threshold)
{
thresh_filter->threshold = threshold;
thresh_filter->last = 0;
}
static float thresh_filter_filter(struct yas_thresh_filter *thresh_filter, float in)
{
if (in < thresh_filter->last - thresh_filter->threshold
|| thresh_filter->last + thresh_filter->threshold < in) {
thresh_filter->last = in;
return in;
}
else {
return thresh_filter->last;
}
}
static int init(yas_filter_handle_t *t)
{
float noise[] = {
YAS_DEFAULT_FILTER_NOISE,
YAS_DEFAULT_FILTER_NOISE,
YAS_DEFAULT_FILTER_NOISE,
};
int i;
if (t == NULL) {
return -1;
}
for (i = 0; i < 3; i++) {
adaptive_filter_init(&t->adap_filter[i], YAS_DEFAULT_FILTER_LEN, noise[i]);
thresh_filter_init(&t->thresh_filter[i], YAS_DEFAULT_FILTER_THRESH);
}
return 0;
}
static int update(yas_filter_handle_t *t, float *input, float *output)
{
int i;
if (t == NULL || input == NULL || output == NULL) {
return -1;
}
for (i = 0; i < 3; i++) {
output[i] = adaptive_filter_filter(&t->adap_filter[i], input[i]);
output[i] = thresh_filter_filter(&t->thresh_filter[i], output[i]);
}
return 0;
}
int yas_filter_init(yas_filter_if_s *f)
{
if (f == NULL) {
return -1;
}
f->init = init;
f->update = update;
return 0;
}
/**
* @brief Used to determine if a compass is
* configured and used by the MPL.
* @return INV_SUCCESS if the compass is present.
*/
unsigned char inv_compass_present(void)
{
INVENSENSE_FUNC_START;
struct mldl_cfg *mldl_cfg = inv_get_dl_config();
if (NULL != mldl_cfg->compass &&
NULL != mldl_cfg->compass->resume &&
mldl_cfg->requested_sensors & INV_THREE_AXIS_COMPASS)
return TRUE;
else
return FALSE;
}
/**
* @brief Query the compass slave address.
* @return The 7-bit compass slave address.
*/
unsigned char inv_get_compass_slave_addr(void)
{
INVENSENSE_FUNC_START;
struct mldl_cfg *mldl_cfg = inv_get_dl_config();
if (NULL != mldl_cfg->pdata)
return mldl_cfg->pdata->compass.address;
else
return 0;
}
/**
* @brief Get the ID of the compass in use.
* @return ID of the compass in use.
*/
unsigned short inv_get_compass_id(void)
{
INVENSENSE_FUNC_START;
struct mldl_cfg *mldl_cfg = inv_get_dl_config();
if (NULL != mldl_cfg->compass) {
return mldl_cfg->compass->id;
}
return ID_INVALID;
}
/**
* @brief Get a sample of compass data from the device.
* @param data
* the buffer to store the compass raw data for
* X, Y, and Z axes.
* @return INV_SUCCESS or a non-zero error code.
*/
inv_error_t inv_get_compass_data(long *data)
{
inv_error_t result;
int ii;
struct mldl_cfg *mldl_cfg = inv_get_dl_config();
unsigned char *tmp = inv_obj.compass_raw_data;
if (mldl_cfg->compass->read_len > sizeof(inv_obj.compass_raw_data)) {
LOG_RESULT_LOCATION(INV_ERROR_INVALID_CONFIGURATION);
return INV_ERROR_INVALID_CONFIGURATION;
}
if (mldl_cfg->pdata->compass.bus == EXT_SLAVE_BUS_PRIMARY ||
!(mldl_cfg->requested_sensors & INV_DMP_PROCESSOR)) {
/*--- read the compass sensor data.
The compass read function may return an INV_ERROR_COMPASS_* errors
when the data is not ready (read/refresh frequency mismatch) or
the internal data sampling timing of the device was not respected.
Returning the error code will make the sensor fusion supervisor
ignore this compass data sample. ---*/
result = (inv_error_t) inv_mpu_read_compass(mldl_cfg,
inv_get_serial_handle(),
inv_get_serial_handle(),
tmp);
if (result) {
if (COMPASS_DEBUG) {
MPL_LOGV("inv_mpu_read_compass returned %d\n", result);
}
return result;
}
for (ii = 0; ii < 3; ii++) {
if (EXT_SLAVE_BIG_ENDIAN == mldl_cfg->compass->endian)
data[ii] =
((long)((signed char)tmp[2 * ii]) << 8) + tmp[2 * ii + 1];
else
data[ii] =
((long)((signed char)tmp[2 * ii + 1]) << 8) + tmp[2 * ii];
}
inv_obj.compass_overunder = (int)tmp[6];
} else {
#if defined CONFIG_MPU_SENSORS_MPU6050A2 || \
defined CONFIG_MPU_SENSORS_MPU6050B1
result = inv_get_external_sensor_data(data, 3);
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
#if defined CONFIG_MPU_SENSORS_MPU6050A2
{
static unsigned char first = TRUE;
// one-off write to AKM
if (first) {
unsigned char regs[] = {
// beginning Mantis register for one-off slave R/W
MPUREG_I2C_SLV4_ADDR,
// the slave to write to
mldl_cfg->pdata->compass.address,
// the register to write to
/*mldl_cfg->compass->trigger->reg */ 0x0A,
// the value to write
/*mldl_cfg->compass->trigger->value */ 0x01,
// enable the write
0xC0
};
result =
inv_serial_write(inv_get_serial_handle(), mldl_cfg->addr,
ARRAY_SIZE(regs), regs);
first = FALSE;
} else {
unsigned char regs[] = {
MPUREG_I2C_SLV4_CTRL,
0xC0
};
result =
inv_serial_write(inv_get_serial_handle(), mldl_cfg->addr,
ARRAY_SIZE(regs), regs);
}
}
#endif
#else
return INV_ERROR_INVALID_CONFIGURATION;
#endif // CONFIG_MPU_SENSORS_xxxx
}
data[0] = inv_q30_mult(data[0], inv_obj.compass_asa[0]);
data[1] = inv_q30_mult(data[1], inv_obj.compass_asa[1]);
data[2] = inv_q30_mult(data[2], inv_obj.compass_asa[2]);
return INV_SUCCESS;
}
/**
* @brief Sets the compass bias.
* @param bias
* Compass bias, length 3. Scale is micro Tesla's * 2^16.
* Frame is mount frame which may be different from body frame.
* @return INV_SUCCESS = 0 if successful. A non-zero error code otherwise.
*/
inv_error_t inv_set_compass_bias(long *bias)
{
inv_error_t result = INV_SUCCESS;
long biasC[3];
struct mldl_cfg *mldlCfg = inv_get_dl_config();
inv_obj.compass_bias[0] = bias[0];
inv_obj.compass_bias[1] = bias[1];
inv_obj.compass_bias[2] = bias[2];
// Find Bias in units of the raw data scaled by 2^16 in chip mounting frame
biasC[0] =
(long)(bias[0] * (1LL << 30) / inv_obj.compass_sens) +
inv_obj.init_compass_bias[0] * (1L << 16);
biasC[1] =
(long)(bias[1] * (1LL << 30) / inv_obj.compass_sens) +
inv_obj.init_compass_bias[1] * (1L << 16);
biasC[2] =
(long)(bias[2] * (1LL << 30) / inv_obj.compass_sens) +
inv_obj.init_compass_bias[2] * (1L << 16);
if (inv_dmpkey_supported(KEY_CPASS_BIAS_X)) {
unsigned char reg[4];
long biasB[3];
signed char *orC = mldlCfg->pdata->compass.orientation;
// Now transform to body frame
biasB[0] = biasC[0] * orC[0] + biasC[1] * orC[1] + biasC[2] * orC[2];
biasB[1] = biasC[0] * orC[3] + biasC[1] * orC[4] + biasC[2] * orC[5];
biasB[2] = biasC[0] * orC[6] + biasC[1] * orC[7] + biasC[2] * orC[8];
result =
inv_set_mpu_memory(KEY_CPASS_BIAS_X, 4,
inv_int32_to_big8(biasB[0], reg));
result =
inv_set_mpu_memory(KEY_CPASS_BIAS_Y, 4,
inv_int32_to_big8(biasB[1], reg));
result =
inv_set_mpu_memory(KEY_CPASS_BIAS_Z, 4,
inv_int32_to_big8(biasB[2], reg));
}
return result;
}
/**
* @brief Write a single register on the compass slave device, regardless
* of the bus it is connected to and the MPU's configuration.
* @param reg
* the register to write to on the slave compass device.
* @param val
* the value to write.
* @return INV_SUCCESS = 0 if successful. A non-zero error code otherwise.
*/
inv_error_t inv_compass_write_reg(unsigned char reg, unsigned char val)
{
struct ext_slave_config config;
unsigned char data[2];
inv_error_t result;
data[0] = reg;
data[1] = val;
config.key = MPU_SLAVE_WRITE_REGISTERS;
config.len = 2;
config.apply = TRUE;
config.data = data;
result = inv_mpu_config_compass(inv_get_dl_config(),
inv_get_serial_handle(),
inv_get_serial_handle(), &config);
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
return result;
}
/**
* @brief Read values from the compass slave device registers, regardless
* of the bus it is connected to and the MPU's configuration.
* @param reg
* the register to read from on the slave compass device.
* @param val
* a buffer of 3 elements to store the values read from the
* compass device.
* @return INV_SUCCESS = 0 if successful. A non-zero error code otherwise.
*/
inv_error_t inv_compass_read_reg(unsigned char reg, unsigned char *val)
{
struct ext_slave_config config;
unsigned char data[2];
inv_error_t result;
data[0] = reg;
config.key = MPU_SLAVE_READ_REGISTERS;
config.len = 2;
config.apply = TRUE;
config.data = data;
result = inv_mpu_get_compass_config(inv_get_dl_config(),
inv_get_serial_handle(),
inv_get_serial_handle(), &config);
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
*val = data[1];
return result;
}
/**
* @brief Read values from the compass slave device scale registers, regardless
* of the bus it is connected to and the MPU's configuration.
* @param reg
* the register to read from on the slave compass device.
* @param val
* a buffer of 3 elements to store the values read from the
* compass device.
* @return INV_SUCCESS = 0 if successful. A non-zero error code otherwise.
*/
inv_error_t inv_compass_read_scale(long *val)
{
struct ext_slave_config config;
unsigned char data[3];
inv_error_t result;
config.key = MPU_SLAVE_READ_SCALE;
config.len = 3;
config.apply = TRUE;
config.data = data;
result = inv_mpu_get_compass_config(inv_get_dl_config(),
inv_get_serial_handle(),
inv_get_serial_handle(), &config);
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
val[0] = ((data[0] - 128) << 22) + (1L << 30);
val[1] = ((data[1] - 128) << 22) + (1L << 30);
val[2] = ((data[2] - 128) << 22) + (1L << 30);
return result;
}
inv_error_t inv_set_compass_offset(void)
{
struct ext_slave_config config;
unsigned char data[3];
inv_error_t result;
config.key = MPU_SLAVE_OFFSET_VALS;
config.len = 3;
config.apply = TRUE;
config.data = data;
if(inv_obj.flags[INV_COMPASS_OFFSET_VALID]) {
/* push stored values */
data[0] = (char)inv_obj.compass_offsets[0];
data[1] = (char)inv_obj.compass_offsets[1];
data[2] = (char)inv_obj.compass_offsets[2];
MPL_LOGI("push compass offsets %hhd, %hhd, %hhd", data[0], data[1], data[2]);
result = inv_mpu_config_compass(inv_get_dl_config(),
inv_get_serial_handle(),
inv_get_serial_handle(), &config);
} else {
/* compute new values and store them */
result = inv_mpu_get_compass_config(inv_get_dl_config(),
inv_get_serial_handle(),
inv_get_serial_handle(), &config);
MPL_LOGI("pulled compass offsets %hhd %hhd %hhd", data[0], data[1], data[2]);
if(result == INV_SUCCESS) {
inv_obj.flags[INV_COMPASS_OFFSET_VALID] = 1;
inv_obj.compass_offsets[0] = data[0];
inv_obj.compass_offsets[1] = data[1];
inv_obj.compass_offsets[2] = data[2];
}
}
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
return result;
}
inv_error_t inv_compass_check_range(void)
{
struct ext_slave_config config;
unsigned char data[3];
inv_error_t result;
config.key = MPU_SLAVE_RANGE_CHECK;
config.len = 3;
config.apply = TRUE;
config.data = data;
result = inv_mpu_get_compass_config(inv_get_dl_config(),
inv_get_serial_handle(),
inv_get_serial_handle(), &config);
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
if(data[0] || data[1] || data[2]) {
/* some value clipped */
return INV_ERROR_COMPASS_DATA_ERROR;
}
return INV_SUCCESS;
}
/**
* @}
*/